(gnome-ssh-askpass:14853): Gtk-WARNING **: 03:14:39.325: cannot open display: localhost:10.0
error: unable to read askpass response from '/usr/libexec/openssh/gnome-ssh-askpass'
fatal: could not read Username for 'https://open-bitbucket.nrao.edu': No such device or address
Error response from daemon: No such container: wheel-container-test
Error response from daemon: No such container: wheel-container-test
2025-10-14 07:29:26        INFO        Simulator::create_corrupt()         Creating TF Calibration structure for data corruption.
2025-10-14 07:29:26        INFO        SVC::sizeUpSim()         For simint = 0.1s, found 60 solution intervals.
2025-10-14 07:29:26        INFO        T::createCorruptor()          PWV fluctuations = 0.15 of mean PWV which is 3mm
2025-10-14 07:29:26        INFO        AtmCorr::initAtm         Initializing ATM
2025-10-14 07:29:26        INFO        AtmCorr::initAtm         altitude=5000m, Pground=560mb, Tground=270K, humidity= 20%, water scale height=2000m
2025-10-14 07:29:26        INFO        AtmCorr::initAtm         Spectral window 230(ch 64/128)
2025-10-14 07:29:26        INFO        AtmCorr::initAtm         After setting WH2O to 3
2025-10-14 07:29:26        INFO        AtmCorr::initAtm         Dry and Wet Opacity from RefractiveIndexProfile = 0.0106494, 0.129 at 230 GHz (ch64)
2025-10-14 07:29:26        INFO        AtmCorr::initAtm         Dry and Wet Opacity from SkyStatus              = 0.0106494, 0.129
2025-10-14 07:29:26        INFO        AtmCorr::initAtm         Sky plus ground and CMB Brightness Temp across Spw 0, for spill=0.85 Tground=270 pwv=3
2025-10-14 07:29:26        INFO        AtmCorr::initAtm          Zenith Tebb[229,230,230.984]=[73.0691,73.3502,74.2397]
2025-10-14 07:29:26        INFO        AtmCorr::init(Seed,Beta,Scale,AntCols)         creating new fBM of size 245,205 (may take a few minutes) ...
2025-10-14 07:29:26        INFO        SVC[Tf Jones]::setSimulate()         Calculating corruption terms for simulated Tf Jones: output table=settrop_table simint=0.1s t=0.1
2025-10-14 07:29:27        INFO        SVC[Tf Jones]::setSimulate()         Writing calTable = settrop_table (Tf Jones)
2025-10-14 07:29:27        INFO                Writing solutions to table: settrop_table
2025-10-14 07:29:27        INFO        Simulator::corrupt()         Doing visibility corruption.
2025-10-14 07:29:27        INFO        Simulator::corrupt()         simulated Tf Jones: output table=settrop_table simint=0.1s t=0spwok = [1] in corrupt mode.
2025-10-14 07:29:28        INFO        Simulator::reset()         Resetting all visibility corruption components
2025-10-14 07:29:28        INFO        Simulator::reset()         Reset all image-plane corruption components
2025-10-14 07:29:28        INFO        NewMSSimulator::initAnt()         Using global coordinates for the antennas
2025-10-14 07:29:28        INFO        NewMSSimulator::initAnt()         Added rows to ANTENNA table
2025-10-14 07:29:28        INFO        MSsimulator::initFeeds()         Added rows to FEED table
2025-10-14 07:29:28        INFO        MSsimulator::initSpWindows()         Creating new spectral window LBand, ID 1
2025-10-14 07:29:28        INFO        simulator::settimes()        Times
2025-10-14 07:29:28        INFO        simulator::settimes()+             Integration time 2000s
2025-10-14 07:29:28        INFO        simulator::settimes()             Times will be interpreted as hour angles for first source
2025-10-14 07:29:28        INFO        NewMSSimulator::observe()        First source: fake @ 19:53:50.00   +40.06.00.00       J2000
2025-10-14 07:29:28        INFO        NewMSSimulator::observe()+        Full time range: 03-Oct-2019/21:16:01.8 -- 04-Oct-2019/07:16:01.8 TAI with int = 2000
2025-10-14 07:29:28        INFO        NewMSSimulator::observe()        Calculating a total of 18 integrations
2025-10-14 07:29:28        INFO        Simulator::reset()         Resetting all visibility corruption components
2025-10-14 07:29:28        INFO        Simulator::reset()         Reset all image-plane corruption components
2025-10-14 07:29:28        INFO        AgentFlagger::open        Table type is Measurement Set
2025-10-14 07:29:28        INFO        AgentFlagger::initAgents        There are initially 1 agents in the list. Agents: unflag
2025-10-14 07:29:28        INFO        AgentFlagger::initAgents        There are 1 valid agents in the list. Agents: unflag
2025-10-14 07:29:28        INFO        FlagMSHandler::        Chunk = 1 [progress: 100%], Observation = 0, Array = 0, Scan = 1, Field = 0 (fake), Spw = 0, Channels = 5, Corrs = [ RR LL ], Total Rows = 6318
2025-10-14 07:29:28        INFO        Unflag::chunkSummary        => Data unflagged so far 100% (63180/63180)
2025-10-14 07:29:28        INFO        FlagMSHandler::nextChunk         ====================================================================================
2025-10-14 07:29:28        INFO        Unflag::tableSummary        => Percentage of data un-flagged in table selection: 100%
2025-10-14 07:29:28        INFO        AgentFlagger::run        => Writing flags to the MS
2025-10-14 07:29:28        INFO        NewMSSimulator::NewMSSimulator(MeasurementSet& theMS)         Opening MeasurementSet /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/myms.ms with 6318 rows
2025-10-14 07:29:28        INFO        NewMSSimulator::NewMSSimulator(MeasurementSet& theMS)            last spectral window ID = 1
2025-10-14 07:29:28        INFO        Simulator::predict()         Predicting visibilities using model: [] and componentList: mycomplist.cl
2025-10-14 07:29:28        INFO        Simulator::predict()         The data column will be replaced
2025-10-14 07:29:28        INFO        Simulator::getVPRecord         Using default Voltage Patterns from the VPManager
2025-10-14 07:29:28        INFO        Simulator::getVPRecord         Temporary alert : The state of the vpmanager tool has been modified by loading these primary beam models. If any of your scripts rely on the vpmanager state being preserved throughout your CASA session, please use vp.saveastable() and vp.loadfromtable() as needed.
2025-10-14 07:29:28        INFO        Simulator::createSkyEquation()         Synthesis gridding
2025-10-14 07:29:28        INFO        Simulator::createSkyEquation()         Fourier transforms will use image centers as tangent points
2025-10-14 07:29:28        INFO        Simulator::reset()         Resetting all visibility corruption components
2025-10-14 07:29:28        INFO        Simulator::reset()         Reset all image-plane corruption components
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        ImageFactory::createImage        Created Paged image 'tmp.im' of shape [3, 4] with float valued pixels.
2025-10-14 07:29:30        SEVERE        getcellslice::bogus        Exception Reported: Table column bogus is unknown
2025-10-14 07:29:30        SEVERE        getcellslice::map        Exception Reported: TableColumn: row number 1 exceeds #rows 1 in table /home/casatest/casa6/casatestutils/nosedir/test_tool_table/tmp.im
2025-10-14 07:29:30        SEVERE        getcellslice::map        Exception Reported: Exception: blc must have length of 2.
2025-10-14 07:29:30        SEVERE        getcellslice::map+        ... thrown by void casac::table::_checkCorner(const std::vector<long int>&, const casacore::String&, const casacore::IPosition&, const std::pair<std::vector<long int>, std::vector<long int> >* const&) at File: src/tools/table/table_cmpt.cc, line: 1386
2025-10-14 07:29:30        SEVERE        getcellslice::map        Exception Reported: Exception: All elements of blc must be greater than or equal to 0.
2025-10-14 07:29:30        SEVERE        getcellslice::map+        ... thrown by void casac::table::_checkCorner(const std::vector<long int>&, const casacore::String&, const casacore::IPosition&, const std::pair<std::vector<long int>, std::vector<long int> >* const&) at File: src/tools/table/table_cmpt.cc, line: 1390
2025-10-14 07:29:30        SEVERE        getcellslice::map        Exception Reported: Exception: Element 1 of blc must be less than 4.
2025-10-14 07:29:30        SEVERE        getcellslice::map+        ... thrown by void casac::table::_checkCorner(const std::vector<long int>&, const casacore::String&, const casacore::IPosition&, const std::pair<std::vector<long int>, std::vector<long int> >* const&) at File: src/tools/table/table_cmpt.cc, line: 1395
2025-10-14 07:29:30        SEVERE        getcellslice::map        Exception Reported: Exception: trc must have length of 2.
2025-10-14 07:29:30        SEVERE        getcellslice::map+        ... thrown by void casac::table::_checkCorner(const std::vector<long int>&, const casacore::String&, const casacore::IPosition&, const std::pair<std::vector<long int>, std::vector<long int> >* const&) at File: src/tools/table/table_cmpt.cc, line: 1386
2025-10-14 07:29:30        SEVERE        getcellslice::map        Exception Reported: Exception: All elements of trc must be greater than or equal to 0.
2025-10-14 07:29:30        SEVERE        getcellslice::map+        ... thrown by void casac::table::_checkCorner(const std::vector<long int>&, const casacore::String&, const casacore::IPosition&, const std::pair<std::vector<long int>, std::vector<long int> >* const&) at File: src/tools/table/table_cmpt.cc, line: 1390
2025-10-14 07:29:30        SEVERE        getcellslice::map        Exception Reported: Exception: Element 0 of trc must be less than 3.
2025-10-14 07:29:30        SEVERE        getcellslice::map+        ... thrown by void casac::table::_checkCorner(const std::vector<long int>&, const casacore::String&, const casacore::IPosition&, const std::pair<std::vector<long int>, std::vector<long int> >* const&) at File: src/tools/table/table_cmpt.cc, line: 1395
2025-10-14 07:29:30        SEVERE        getcellslice::map        Exception Reported: Exception: All elements of trc must be greater than or equal to their corresponding blc elements.
2025-10-14 07:29:30        SEVERE        getcellslice::map+        ... thrown by void casac::table::_checkCorner(const std::vector<long int>&, const casacore::String&, const casacore::IPosition&, const std::pair<std::vector<long int>, std::vector<long int> >* const&) at File: src/tools/table/table_cmpt.cc, line: 1405
2025-10-14 07:29:30        SEVERE        getcellslice::map        Exception Reported: Exception: incr must have length of 2.
2025-10-14 07:29:30        SEVERE        getcellslice::map+        ... thrown by casac::variant* casac::table::getcellslice(const string&, long int, const std::vector<long int>&, const std::vector<long int>&, const std::vector<long int>&) at File: src/tools/table/table_cmpt.cc, line: 1466
2025-10-14 07:29:30        SEVERE        getcellslice::map        Exception Reported: Exception: All elements of incr must be greater than 0.
2025-10-14 07:29:30        SEVERE        getcellslice::map+        ... thrown by casac::variant* casac::table::getcellslice(const string&, long int, const std::vector<long int>&, const std::vector<long int>&, const std::vector<long int>&) at File: src/tools/table/table_cmpt.cc, line: 1471
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        ImageFactory::createImage        Created Paged image 'tmp.im' of shape [3, 4] with float valued pixels.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
2025-10-14 07:29:30        INFO        name::        No table opened.
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv

[notice] A new release of pip is available: 23.0.1 -> 25.2
[notice] To update, run: pip3 install --upgrade pip
Cloning into 'casa-build-utils'...