Build: #2 was successful
Job: Test Tools macOS15 was successful
Build log
The build generated 53,282 lines of output. The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
| 23-Oct-2026 13:48:36 | 2026-10-23 17:48:37 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:36 | 2026-10-23 17:48:37 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:37 | 2026-10-23 17:48:37 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:48:37 | 2026-10-23 17:48:37 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:37 | 2026-10-23 17:48:37 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 23-Oct-2026 13:48:37 | 2026-10-23 17:48:37 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 23-Oct-2026 13:48:37 | 2026-10-23 17:48:37 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:37 | 2026-10-23 17:48:37 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 23-Oct-2026 13:48:37 | 2026-10-23 17:48:37 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:48:37 | 2026-10-23 17:48:37 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:37 | 2026-10-23 17:48:38 INFO calibrater::corrupt Finished corrupting. |
| 23-Oct-2026 13:48:37 | 2026-10-23 17:48:38 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:48:37 | test_tool_calibrater.py::calibrater_test::test_activityRecord |
| 23-Oct-2026 13:48:37 | Check that using the calibrater to modify the vis shows in the activity record |
| 23-Oct-2026 13:48:37 | PASSED |
| 23-Oct-2026 13:48:37 | |
| 23-Oct-2026 13:48:37 | 2026-10-23 17:48:38 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:48:37 | 2026-10-23 17:48:38 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:48:37 | 2026-10-23 17:48:38 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:37 | 2026-10-23 17:48:38 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:38 | 2026-10-23 17:48:38 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:38 | 2026-10-23 17:48:39 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:48:38 | 2026-10-23 17:48:39 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:38 | 2026-10-23 17:48:39 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 23-Oct-2026 13:48:38 | 2026-10-23 17:48:39 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 23-Oct-2026 13:48:38 | 2026-10-23 17:48:39 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:38 | 2026-10-23 17:48:39 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 23-Oct-2026 13:48:38 | 2026-10-23 17:48:39 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:48:38 | 2026-10-23 17:48:39 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:39 | 2026-10-23 17:48:39 INFO calibrater::corrupt Finished corrupting. |
| 23-Oct-2026 13:48:39 | 2026-10-23 17:48:39 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:48:39 | test_tool_calibrater.py::calibrater_test::test_corruptCal |
| 23-Oct-2026 13:48:39 | Check that the MS is corrupted using the cal table |
| 23-Oct-2026 13:48:39 | PASSED |
| 23-Oct-2026 13:48:39 | |
| 23-Oct-2026 13:48:39 | 2026-10-23 17:48:40 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:48:39 | 2026-10-23 17:48:40 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:48:39 | 2026-10-23 17:48:40 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:39 | 2026-10-23 17:48:40 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:40 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:40 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:40 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:40 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:48:40 | test_tool_calibrater.py::calibrater_test::test_createEmpty |
| 23-Oct-2026 13:48:40 | Check that an empty cal table can be created |
| 23-Oct-2026 13:48:40 | PASSED |
| 23-Oct-2026 13:48:40 | |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:40 INFO name:: No table opened. |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:40 INFO showcache:: The Table Cache is empty. |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:40 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:40 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:40 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:40 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO name:: No table opened. |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO showcache:: The Table Cache has the following 16 entries: |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO showcache:: 0: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO showcache:: 1: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO showcache:: 2: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO showcache:: 3: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO showcache:: 4: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO showcache:: 5: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO showcache:: 6: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO showcache:: 7: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO showcache:: 8: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO showcache:: 9: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO showcache:: 10: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO showcache:: 11: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO showcache:: 12: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO showcache:: 13: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO showcache:: 14: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO showcache:: 15: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:48:40 | test_tool_calibrater.py::calibrater_test::test_done |
| 23-Oct-2026 13:48:40 | Check that done closes the active calibrator tool |
| 23-Oct-2026 13:48:40 | PASSED |
| 23-Oct-2026 13:48:40 | |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:40 | 2026-10-23 17:48:41 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:41 | 2026-10-23 17:48:41 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:41 | 2026-10-23 17:48:41 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:48:41 | 2026-10-23 17:48:41 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:41 | 2026-10-23 17:48:41 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 23-Oct-2026 13:48:41 | 2026-10-23 17:48:41 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 23-Oct-2026 13:48:41 | 2026-10-23 17:48:42 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:41 | 2026-10-23 17:48:42 INFO calibrater::correct Beginning correct--------------------------- |
| 23-Oct-2026 13:48:41 | 2026-10-23 17:48:42 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:48:41 | 2026-10-23 17:48:42 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:42 | 2026-10-23 17:48:42 INFO calibrater::correct Finished correcting. |
| 23-Oct-2026 13:48:42 | 2026-10-23 17:48:42 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 23-Oct-2026 13:48:42 | 2026-10-23 17:48:42 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:48:42 | 2026-10-23 17:48:42 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:42 | 2026-10-23 17:48:42 INFO calibrater::initcalset Beginning initcalset------------------------ |
| 23-Oct-2026 13:48:42 | 2026-10-23 17:48:42 INFO VisSet::VisSet Initializing MODEL_DATA (to unity) and CORRECTED_DATA (to DATA) |
| 23-Oct-2026 13:48:42 | 2026-10-23 17:48:43 INFO VisSet::VisSet Initialized 328860 rows. |
| 23-Oct-2026 13:48:42 | 2026-10-23 17:48:43 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 23-Oct-2026 13:48:42 | test_tool_calibrater.py::calibrater_test::test_reinitModel |
| 23-Oct-2026 13:48:42 | Check that initcalset will reset the CORRECTED_DATA to unity |
| 23-Oct-2026 13:48:42 | PASSED |
| 23-Oct-2026 13:48:42 | |
| 23-Oct-2026 13:48:42 | 2026-10-23 17:48:43 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:48:42 | 2026-10-23 17:48:43 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:48:42 | 2026-10-23 17:48:43 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:42 | 2026-10-23 17:48:43 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 INFO Calibrater::setsolve Arranging to SOLVE: |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 INFO Calibrater::setsolve . Mf Mueller: table=gaincaltest2.ms.G0 append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 INFO calibrater::reset Reseting solve/apply state |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 INFO calibrater::solve Beginning solve----------------------------- |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 SEVERE Calibrater::solve Caught exception: Please run setsolve before attempting to solve. |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 INFO Calibrater::solve Reseting entire solve/apply state. |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 SEVERE Exception Reported: Error in Calibrater::solve. |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 INFO calibrater::correct Beginning correct--------------------------- |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 INFO Calibrater::correct2 (VI2/VB2) . (None) |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 SEVERE Calibrater::correct2 (VI2/VB2) Caught exception: Nothing to Apply |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 INFO Calibrater::correct2 (VI2/VB2) Resetting all calibration application settings. |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 SEVERE Exception Reported: Error in Calibrater::correct. |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:43 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:48:43 | test_tool_calibrater.py::calibrater_test::test_resetSolveApply |
| 23-Oct-2026 13:48:43 | Check that the reset function can clear set apply and solves |
| 23-Oct-2026 13:48:43 | PASSED |
| 23-Oct-2026 13:48:43 | |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:44 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:44 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:44 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:44 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:44 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:44 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:48:43 | 2026-10-23 17:48:44 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:44 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:44 INFO calibrater::reset Reseting solve/apply state |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:44 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:44 INFO Calibrater::selectvis+ Selecting on spw: '1' |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:44 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:44 INFO Calibrater::selectvis Frequency selection: |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:44 INFO Calibrater::selectvis . Spw 1:0~7 (8 channels, step by 1) |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:44 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:44 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:48:44 | test_tool_calibrater.py::calibrater_test::test_returnDict |
| 23-Oct-2026 13:48:44 | Check that the returndict function gives a dictonary with the expected keys |
| 23-Oct-2026 13:48:44 | PASSED |
| 23-Oct-2026 13:48:44 | |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:44 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:44 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:44 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:44 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:45 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:45 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:45 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:45 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:45 INFO calibrater::reset Reseting solve/apply state |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:45 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:45 INFO Calibrater::selectvis+ Selecting on antenna/baseline: '0' |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:45 INFO Calibrater::selectvis By selection 328860 rows are reduced to 65772 |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:45 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:45 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:45 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:45 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:45 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:45 INFO calibrater::correct Beginning correct--------------------------- |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:45 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:48:44 | 2026-10-23 17:48:45 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:45 | 2026-10-23 17:48:45 INFO calibrater::correct Finished correcting. |
| 23-Oct-2026 13:48:45 | 2026-10-23 17:48:46 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:48:45 | test_tool_calibrater.py::calibrater_test::test_selectVisBaseline |
| 23-Oct-2026 13:48:45 | Check that selectvis properly selects baseline/antenna |
| 23-Oct-2026 13:48:45 | 65772 65772 |
| 23-Oct-2026 13:48:45 | 263088 263088 |
| 23-Oct-2026 13:48:45 | PASSED |
| 23-Oct-2026 13:48:45 | |
| 23-Oct-2026 13:48:45 | 2026-10-23 17:48:46 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:48:45 | 2026-10-23 17:48:46 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:48:45 | 2026-10-23 17:48:46 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:45 | 2026-10-23 17:48:46 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:46 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:46 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:46 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:46 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:46 INFO calibrater::reset Reseting solve/apply state |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:46 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:46 INFO Calibrater::selectvis+ Selecting on field: '0' |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:46 INFO Calibrater::selectvis By selection 328860 rows are reduced to 172260 |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:46 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:46 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:46 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:46 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:46 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:46 INFO calibrater::correct Beginning correct--------------------------- |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:46 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:46 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:47 INFO calibrater::correct Finished correcting. |
| 23-Oct-2026 13:48:46 | 2026-10-23 17:48:47 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:48:46 | test_tool_calibrater.py::calibrater_test::test_selectVisField |
| 23-Oct-2026 13:48:46 | Check that the field is properly selected by selectvis |
| 23-Oct-2026 13:48:46 | PASSED |
| 23-Oct-2026 13:48:46 | |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:47 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:47 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:47 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:47 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:47 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:47 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:47 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:47 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:47 INFO calibrater::reset Reseting solve/apply state |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:47 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:47 INFO Calibrater::selectvis+ Selecting on intent: '*AMPLI*' |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:47 INFO Calibrater::selectvis Selection did not drop any rows |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:47 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:47 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:47 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:47 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:48 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:48 INFO calibrater::correct Beginning correct--------------------------- |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:48 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:48:47 | 2026-10-23 17:48:48 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:48 INFO calibrater::correct Finished correcting. |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:48 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:48:48 | test_tool_calibrater.py::calibrater_test::test_selectVisIntent |
| 23-Oct-2026 13:48:48 | Check that the intent is properly selected by selectvis |
| 23-Oct-2026 13:48:48 | PASSED |
| 23-Oct-2026 13:48:48 | |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:49 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:49 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:49 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:49 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:49 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:49 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:49 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:49 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:49 INFO calibrater::reset Reseting solve/apply state |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:49 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:49 INFO Calibrater::selectvis+ Selecting by observation IDs: '0' |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:49 INFO Calibrater::selectvis By selection 328860 rows are reduced to 318870 |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:49 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:49 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:49 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 23-Oct-2026 13:48:48 | 2026-10-23 17:48:49 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 23-Oct-2026 13:48:49 | 2026-10-23 17:48:49 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:49 | 2026-10-23 17:48:49 INFO calibrater::correct Beginning correct--------------------------- |
| 23-Oct-2026 13:48:49 | 2026-10-23 17:48:49 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:48:49 | 2026-10-23 17:48:49 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:49 | 2026-10-23 17:48:50 INFO calibrater::correct Finished correcting. |
| 23-Oct-2026 13:48:49 | 2026-10-23 17:48:50 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:48:49 | test_tool_calibrater.py::calibrater_test::test_selectVisObs |
| 23-Oct-2026 13:48:49 | PASSED |
| 23-Oct-2026 13:48:49 | |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:50 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:50 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:50 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:50 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:50 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO calibrater::reset Reseting solve/apply state |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO Calibrater::selectvis+ Selecting on scan: '2' |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO Calibrater::selectvis By selection 328860 rows are reduced to 15660 |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO calibrater::correct Beginning correct--------------------------- |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO calibrater::correct Finished correcting. |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:48:50 | test_tool_calibrater.py::calibrater_test::test_selectVisScan |
| 23-Oct-2026 13:48:50 | Check tht the scan is properly selected by selectvis |
| 23-Oct-2026 13:48:50 | PASSED |
| 23-Oct-2026 13:48:50 | |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:50 | 2026-10-23 17:48:51 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:51 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:51 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:51 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:51 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:51 INFO calibrater::reset Reseting solve/apply state |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:51 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:51 INFO Calibrater::selectvis+ Selecting on spw: '0' |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:51 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:51 INFO Calibrater::selectvis Frequency selection: |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:51 INFO Calibrater::selectvis . Spw 0:0~7 (8 channels, step by 1) |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:51 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:51 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:51 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:51 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:51 INFO calibrater::correct Beginning correct--------------------------- |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:51 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:51 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:52 INFO calibrater::correct Finished correcting. |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:52 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:48:51 | test_tool_calibrater.py::calibrater_test::test_selectVisSpw |
| 23-Oct-2026 13:48:51 | Check that spw is properly selected by selectvis |
| 23-Oct-2026 13:48:51 | PASSED |
| 23-Oct-2026 13:48:51 | |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:52 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:52 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:52 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:51 | 2026-10-23 17:48:52 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:52 | 2026-10-23 17:48:52 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:52 | 2026-10-23 17:48:52 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:48:52 | 2026-10-23 17:48:52 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:52 | 2026-10-23 17:48:52 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 23-Oct-2026 13:48:52 | 2026-10-23 17:48:52 INFO calibrater::reset Reseting solve/apply state |
| 23-Oct-2026 13:48:52 | 2026-10-23 17:48:52 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 23-Oct-2026 13:48:52 | 2026-10-23 17:48:52 INFO Calibrater::selectvis+ Selecting on time: '>04:38:23' |
| 23-Oct-2026 13:48:52 | 2026-10-23 17:48:52 INFO Calibrater::selectvis By selection 328860 rows are reduced to 313200 |
| 23-Oct-2026 13:48:52 | 2026-10-23 17:48:52 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 23-Oct-2026 13:48:52 | 2026-10-23 17:48:52 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 23-Oct-2026 13:48:52 | 2026-10-23 17:48:52 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 23-Oct-2026 13:48:52 | 2026-10-23 17:48:52 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 23-Oct-2026 13:48:52 | 2026-10-23 17:48:52 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:52 | 2026-10-23 17:48:52 INFO calibrater::correct Beginning correct--------------------------- |
| 23-Oct-2026 13:48:52 | 2026-10-23 17:48:52 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:48:52 | 2026-10-23 17:48:52 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:53 | 2026-10-23 17:48:53 INFO calibrater::correct Finished correcting. |
| 23-Oct-2026 13:48:53 | 2026-10-23 17:48:53 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:48:53 | test_tool_calibrater.py::calibrater_test::test_selectVisTime |
| 23-Oct-2026 13:48:53 | Check that time is properly selected by selectvis |
| 23-Oct-2026 13:48:53 | PASSED |
| 23-Oct-2026 13:48:53 | |
| 23-Oct-2026 13:48:53 | 2026-10-23 17:48:53 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:48:53 | 2026-10-23 17:48:53 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:48:53 | 2026-10-23 17:48:53 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:53 | 2026-10-23 17:48:53 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:53 | 2026-10-23 17:48:54 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:53 | 2026-10-23 17:48:54 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:48:53 | 2026-10-23 17:48:54 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:53 | 2026-10-23 17:48:54 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 23-Oct-2026 13:48:53 | 2026-10-23 17:48:54 INFO calibrater::reset Reseting solve/apply state |
| 23-Oct-2026 13:48:53 | 2026-10-23 17:48:54 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 23-Oct-2026 13:48:53 | 2026-10-23 17:48:54 INFO Calibrater::selectvis+ Selecting on uvrange: '> 500000lambda' |
| 23-Oct-2026 13:48:54 | 2026-10-23 17:48:54 INFO Calibrater::selectvis By selection 328860 rows are reduced to 103321 |
| 23-Oct-2026 13:48:54 | 2026-10-23 17:48:54 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 23-Oct-2026 13:48:54 | 2026-10-23 17:48:54 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 23-Oct-2026 13:48:54 | 2026-10-23 17:48:54 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 23-Oct-2026 13:48:54 | 2026-10-23 17:48:54 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 23-Oct-2026 13:48:54 | 2026-10-23 17:48:54 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:54 | 2026-10-23 17:48:54 INFO calibrater::correct Beginning correct--------------------------- |
| 23-Oct-2026 13:48:54 | 2026-10-23 17:48:54 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:48:54 | 2026-10-23 17:48:54 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:48:54 | 2026-10-23 17:48:55 INFO calibrater::correct Finished correcting. |
| 23-Oct-2026 13:48:54 | 2026-10-23 17:48:55 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:48:54 | test_tool_calibrater.py::calibrater_test::test_selectVisUVrange |
| 23-Oct-2026 13:48:54 | Check that selectvis properly selects for uvrange |
| 23-Oct-2026 13:48:54 | PASSED |
| 23-Oct-2026 13:48:54 | |
| 23-Oct-2026 13:48:54 | 2026-10-23 17:48:55 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:48:54 | 2026-10-23 17:48:55 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:48:54 | 2026-10-23 17:48:55 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:54 | 2026-10-23 17:48:55 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:55 | 2026-10-23 17:48:55 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:55 | 2026-10-23 17:48:55 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:48:55 | 2026-10-23 17:48:55 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:55 | 2026-10-23 17:48:55 INFO calibrater::parsecallibfile Beginning parsecallibfile-)------- |
| 23-Oct-2026 13:48:55 | 2026-10-23 17:48:55 INFO calibrater::setcallib Beginning setcallib--------- |
| 23-Oct-2026 13:48:55 | 2026-10-23 17:48:55 INFO Calibrater::setcallib2(callib) Arranging to APPLY: |
| 23-Oct-2026 13:48:55 | 2026-10-23 17:48:55 INFO . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 23-Oct-2026 13:48:55 | 2026-10-23 17:48:55 INFO . 0: |
| 23-Oct-2026 13:48:55 | 2026-10-23 17:48:55 INFO + MS: obs= scan= fld= intent= spw= |
| 23-Oct-2026 13:48:55 | 2026-10-23 17:48:55 INFO + CT: tinterp=linear finterp= |
| 23-Oct-2026 13:48:55 | 2026-10-23 17:48:55 INFO + obsmap=[] scanmap=[] fldmap=[] |
| 23-Oct-2026 13:48:55 | 2026-10-23 17:48:55 INFO + spwmap=[] antmap=[] |
| 23-Oct-2026 13:48:55 | 2026-10-23 17:48:55 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 23-Oct-2026 13:48:55 | 2026-10-23 17:48:55 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:48:55 | 2026-10-23 17:48:55 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 23-Oct-2026 13:48:55 | 2026-10-23 17:48:56 INFO calibrater::corrupt Finished corrupting. |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:56 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:48:56 | test_tool_calibrater.py::calibrater_test::test_setCalLib |
| 23-Oct-2026 13:48:56 | Check that a provided cal table can be used to corrupt the MODEL_DATA |
| 23-Oct-2026 13:48:56 | PASSED |
| 23-Oct-2026 13:48:56 | |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:56 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:56 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:56 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:56 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO Calibrater::setCorrDepFlags Setting correlation dependent flags = True |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:48:56 | test_tool_calibrater.py::calibrater_test::test_setCorrDepFlags |
| 23-Oct-2026 13:48:56 | Check that corrdepflags will be checked |
| 23-Oct-2026 13:48:56 | PASSED |
| 23-Oct-2026 13:48:56 | |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO calibrater::smooth Beginning smooth--(MSSelection version)------- |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO Calibrater::smooth Beginning smoothing/interpolating method. |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 WARN Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/ngc5921.gcal); attempting to update... |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO Calibrater::smooth Storing result in testcalout.cal |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO Writing solutions to table: testcalout.cal |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:48:56 | test_tool_calibrater.py::calibrater_test::test_smoothedCalTables |
| 23-Oct-2026 13:48:56 | Check that the smooth command creates a smoothed cal table |
| 23-Oct-2026 13:48:56 | PASSED |
| 23-Oct-2026 13:48:56 | |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 23-Oct-2026 13:48:56 | 2026-10-23 17:48:57 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO calibrater::setsolvebandpoly Beginning setsolvebandpoly--(MSSelection version)------- |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO Calibrater::setsolvebandpoly Arranging to SOLVE: |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO Calibrater::setsolvebandpoly . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO calibrater::solve Beginning solve----------------------------- |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO Calibrater::solve . (None) |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO Calibrater::solve . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO Calibrater::solve Solving for BPOLY |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO For solint = inf, found 7 solution intervals. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.059507/0.0681762/0.0765806 |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.33653/0.750193/1.6779 |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0630839/0.0689061/0.0756384 |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.279482/0.74979/1.59355 |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0672607/0.089081/0.111106 |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.31075/3.32219/4.29305 |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0652822/0.0889198/0.116912 |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.44269/3.26616/4.3519 |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350681/0.587724/0.894558 |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:57 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.296/59.0077/111.454 |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.354236/0.581733/0.988903 |
| 23-Oct-2026 13:48:57 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 17.2419/56.3249/117.264 |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0850169/0.113968/0.15276 |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.67561/5.33243/8.17296 |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0784237/0.114345/0.159908 |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:58 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.46392/5.27232/7.20673 |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0703936/0.102501/0.131676 |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.98728/4.47977/5.84264 |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0751114/0.102994/0.138529 |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.18629/4.47068/5.89411 |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350626/0.604424/0.974388 |
| 23-Oct-2026 13:48:58 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.2542/59.3511/120.719 |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.382806/0.598119/0.941571 |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:48:59 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 20.0637/57.2112/118.101 |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0750931/0.0978998/0.125897 |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.72933/3.98787/5.33715 |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0658572/0.0972125/0.140794 |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.97943/3.97841/5.72903 |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO Calibrater::solve Found good BPOLY solutions in 7 slots. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO calibrater::solve Finished solving. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 23-Oct-2026 13:48:59 | test_tool_calibrater.py::calibrater_test::test_solveBandpass |
| 23-Oct-2026 13:48:59 | Check that solve band poly creates the output table |
| 23-Oct-2026 13:48:59 | PASSED |
| 23-Oct-2026 13:48:59 | |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:48:59 | 2026-10-23 17:49:00 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO calibrater::setsolvegainspline Beginning setsolvegainspline--(MSSelection version)------- |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO Calibrater::setsolvegainspline Arranging to SOLVE: |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO Calibrater::setsolvegainspline . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO calibrater::solve Beginning solve----------------------------- |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO Calibrater::solve . (None) |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO Calibrater::solve . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO GJonesSpline::solve() Fitting time-dependent cubic splines. |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO GJonesSpline::solve() Solving for phase splines with splinetime= 10800 |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO GJonesSpline::solve() Solving for amplitude splines with splinetime= 10800 |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO GJonesSpline::solve() Accumulating data for: field= 1331+30500002_0, spw= 0, nchan= 63 |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63 |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63 |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO GJonesSpline::solve() Number of timestamps in data = 60 |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec. |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO GJonesSpline::solve() Number of cubic spline control points = 4 |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO GJonesSpline::solve() Number of cubic spline knots = 8 |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO GJonesSpline::solve() Number of cubic spline segments = 1 |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO GJonesSpline::solve() Fitting amplitude spline. |
| 23-Oct-2026 13:49:00 | test_tool_calibrater.py::calibrater_test::test_solveGainspline DPBTRF ;problem leading minor 23 |
| 23-Oct-2026 13:49:00 | DPBTRF ;problem leading minor 23 |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline. |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO GJonesSpline::solve() Fitting phase spline. |
| 23-Oct-2026 13:49:00 | DPBTRF ;problem leading minor 22 |
| 23-Oct-2026 13:49:00 | DPBTRF ;problem leading minor 22 |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO calibrater::solve Finished solving. |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 23-Oct-2026 13:49:00 | |
| 23-Oct-2026 13:49:00 | Check that solve gain spline creates the output table |
| 23-Oct-2026 13:49:00 | PASSED |
| 23-Oct-2026 13:49:00 | |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:00 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:01 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:01 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:01 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:01 INFO calibrater::specifycal Beginning specifycal----------------------- |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:01 INFO Creating G Jones table from specified parameters. |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:01 INFO Generating 'G' corrections. |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:01 INFO Specified parameter(s) (per spw and pol) repeated on all antennas. |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:01 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations. |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:01 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9]) |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:01 INFO Writing solutions to table: testcalout.cal |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:01 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:49:00 | test_tool_calibrater.py::calibrater_test::test_specifyCal |
| 23-Oct-2026 13:49:00 | Check that specifycal can set values for specific spws and antennas |
| 23-Oct-2026 13:49:00 | PASSED |
| 23-Oct-2026 13:49:00 | |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:01 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:01 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:01 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:01 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:49:00 | 2026-10-23 17:49:01 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO Calibrater::setsolve Arranging to SOLVE: |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO Calibrater::state The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO Calibrater::state The following calibration term is arranged for solve: |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO calibrater::solve Beginning solve----------------------------- |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:01 INFO Solving for Mf Mueller |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:02 INFO For solint = inf, found 84 solution intervals. |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:02 INFO Found good Mf Mueller solutions in 84 intervals. |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:02 INFO Writing solutions to table: output.ms |
| 23-Oct-2026 13:49:01 | 2026-10-23 17:49:02 INFO calibrater::solve Finished solving. |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:02 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 23-Oct-2026 13:49:02 | test_tool_calibrater.py::calibrater_test::test_standardPath |
| 23-Oct-2026 13:49:02 | open setapply setsolve state solve close |
| 23-Oct-2026 13:49:02 | PASSED |
| 23-Oct-2026 13:49:02 | |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:02 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:02 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:02 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:02 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO name:: No table opened. |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: The Table Cache has the following 16 entries: |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: 0: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: 1: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: 2: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: 3: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: 4: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: 5: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: 6: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: 7: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: 8: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: 9: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: 10: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: 11: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: 12: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: 13: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: 14: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: 15: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO name:: No table opened. |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO showcache:: The Table Cache is empty. |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:49:02 | test_tool_calibrater.py::calibrater_test::test_takesMs |
| 23-Oct-2026 13:49:02 | Check that the calibrater tool can open and close an MS |
| 23-Oct-2026 13:49:02 | PASSED |
| 23-Oct-2026 13:49:02 | |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO Clearing all model records in MS header. |
| 23-Oct-2026 13:49:02 | 2026-10-23 17:49:03 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 23-Oct-2026 13:49:03 | 2026-10-23 17:49:03 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 23-Oct-2026 13:49:03 | 2026-10-23 17:49:03 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 23-Oct-2026 13:49:03 | 2026-10-23 17:49:03 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 23-Oct-2026 13:49:03 | 2026-10-23 17:49:03 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 23-Oct-2026 13:49:03 | 2026-10-23 17:49:03 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 23-Oct-2026 13:49:03 | 2026-10-23 17:49:03 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:49:03 | 2026-10-23 17:49:03 INFO calibrater::correct Beginning correct--------------------------- |
| 23-Oct-2026 13:49:03 | 2026-10-23 17:49:03 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 23-Oct-2026 13:49:03 | 2026-10-23 17:49:03 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 23-Oct-2026 13:49:04 | 2026-10-23 17:49:04 INFO calibrater::correct Finished correcting. |
| 23-Oct-2026 13:49:04 | 2026-10-23 17:49:04 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 23-Oct-2026 13:49:04 | test_tool_calibrater.py::calibrater_test::test_writeToCorrected |
| 23-Oct-2026 13:49:04 | Check that the tool writes to the CORRECTED_DATA column |
| 23-Oct-2026 13:49:04 | PASSED |
| 23-Oct-2026 13:49:04 | |
| 23-Oct-2026 13:49:04 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml - |
| 23-Oct-2026 13:49:04 | ======================== 24 passed, 1 warning in 29.08s ======================== |
| 23-Oct-2026 13:49:04 | ============================= test session starts ============================== |
| 23-Oct-2026 13:49:04 | platform darwin -- Python 3.12.8, pytest-9.1.1, pluggy-1.7.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6testenv/bin/python3.12 |
| 23-Oct-2026 13:49:04 | cachedir: .pytest_cache |
| 23-Oct-2026 13:49:04 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_synthesisutils |
| 23-Oct-2026 13:49:04 | configfile: pytest.ini |
| 23-Oct-2026 13:49:05 | collecting ... collected 13 items |
| 23-Oct-2026 13:49:05 | |
| 23-Oct-2026 13:49:05 | |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO BeamManipulator::set Setting (global) restoring beam. |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO BeamManipulator::set Beam parameters: Major : 1 arcsec |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO BeamManipulator::set+ Minor : 1 arcsec |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO BeamManipulator::set+ Position Angle : 0 deg |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO SIImageStore::Open existing Images SumWt does not exist. Proceeding only with PSF |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO SynthesisUtilMethods::fitPsfBeam Fitting PSF beam for Imagestore : su_fitpsfbeam_test_mfs |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO SIImageStore::getPSFGaussian Time to fit Gaussian to PSF 0.002685 |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO SIImageStore::printBeamSet Beam : 52.9301 arcsec, 49.1474 arcsec, -87.3942 deg |
| 23-Oct-2026 13:49:05 | test_tool_synthesisutils.py::fitpsfbeam_test::test_mfs |
| 23-Oct-2026 13:49:05 | Test that fitting of mfs psf works |
| 23-Oct-2026 13:49:05 | PASSED |
| 23-Oct-2026 13:49:05 | |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO BeamManipulator::set Setting (global) restoring beam. |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO BeamManipulator::set Beam parameters: Major : 1 arcsec |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO BeamManipulator::set+ Minor : 1 arcsec |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO BeamManipulator::set+ Position Angle : 0 deg |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO SIImageStore::Open existing Images SumWt does not exist. Proceeding only with PSF |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO SynthesisUtilMethods::fitPsfBeam Fitting PSF beam for Imagestore : su_fitpsfbeam_test_mfs |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO SIImageStore::getPSFGaussian Time to fit Gaussian to PSF 0.003562 |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO SIImageStore::printBeamSet Beam : 49.8956 arcsec, 46.8024 arcsec, -88.289 deg |
| 23-Oct-2026 13:49:05 | test_tool_synthesisutils.py::fitpsfbeam_test::test_mfs_largerpsfcutoff |
| 23-Oct-2026 13:49:05 | Test that psfcutoff with a valid (larger) number works |
| 23-Oct-2026 13:49:05 | PASSED |
| 23-Oct-2026 13:49:05 | |
| 23-Oct-2026 13:49:05 | test_tool_synthesisutils.py::fitpsfbeam_test::test_mfs_wrong_nterms |
| 23-Oct-2026 13:49:05 | Test that it catches if nterms is inconsistent with input psf (nterms=2, for a single term psf) |
| 23-Oct-2026 13:49:05 | PASSED |
| 23-Oct-2026 13:49:05 | |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 WARN SynthesisUtilMethods::fitPsfBeam psfcutoff must be >0 and <1 |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 WARN SynthesisUtilMethods::fitPsfBeam psfcutoff must be >0 and <1 |
| 23-Oct-2026 13:49:05 | test_tool_synthesisutils.py::fitpsfbeam_test::test_mfs_wrong_psfcutoff |
| 23-Oct-2026 13:49:05 | Test that psfcutoff is given outside the allowed range (1.0) |
| 23-Oct-2026 13:49:05 | PASSED |
| 23-Oct-2026 13:49:05 | |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO BeamManipulator::set Setting (global) restoring beam. |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO BeamManipulator::set Beam parameters: Major : 1 arcsec |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO BeamManipulator::set+ Minor : 1 arcsec |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO BeamManipulator::set+ Position Angle : 0 deg |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO SIImageStoreMultiTerm::Open existing Images SumWt.ttx do not exist. Proceeding only with PSFs |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO SynthesisUtilMethods::fitPsfBeam Fitting PSF beam for Imagestore : su_fitpsfbeam_test_mtmfs |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO SIImageStore::getPSFGaussian Time to fit Gaussian to PSF 0.002381 |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO SIImageStore::printBeamSet Beam : 52.9301 arcsec, 49.1474 arcsec, -87.3942 deg |
| 23-Oct-2026 13:49:05 | test_tool_synthesisutils.py::fitpsfbeam_test::test_mtmfs_nterms2 |
| 23-Oct-2026 13:49:05 | Test that fitting of multiterm psf works |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO name:: No table opened. |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO name:: No table opened. |
| 23-Oct-2026 13:49:05 | PASSED |
| 23-Oct-2026 13:49:05 | |
| 23-Oct-2026 13:49:05 | test_tool_synthesisutils.py::getoptimumsize_test::test_default |
| 23-Oct-2026 13:49:05 | Test default size |
| 23-Oct-2026 13:49:05 | PASSED |
| 23-Oct-2026 13:49:05 | |
| 23-Oct-2026 13:49:05 | test_tool_synthesisutils.py::getoptimumsize_test::test_evenimsize |
| 23-Oct-2026 13:49:05 | Test even non-optimal number |
| 23-Oct-2026 13:49:05 | PASSED |
| 23-Oct-2026 13:49:05 | |
| 23-Oct-2026 13:49:05 | test_tool_synthesisutils.py::getoptimumsize_test::test_oddimsize |
| 23-Oct-2026 13:49:05 | Test odd non-optimal number |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO name:: No table opened. |
| 23-Oct-2026 13:49:05 | 2026-10-23 17:49:06 INFO name:: No table opened. |
| 23-Oct-2026 13:49:05 | PASSED |
| 23-Oct-2026 13:49:05 | |
| 23-Oct-2026 13:49:06 | 2026-10-23 17:49:07 INFO msmetadata_cmpt.cc::open Performing internal consistency checks on twhya.short.ms... |
| 23-Oct-2026 13:49:06 | 2026-10-23 17:49:07 SEVERE MeasTable::dUTC(Double) (file ../../measures/Measures/MeasTable.cc, line 4290) Leap second table TAI_UTC seems out-of-date. |
| 23-Oct-2026 13:49:06 | 2026-10-23 17:49:07 SEVERE MeasTable::dUTC(Double) (file ../../measures/Measures/MeasTable.cc, line 4290)+ Until the table is updated (see the CASA documentation or your system admin), |
| 23-Oct-2026 13:49:06 | 2026-10-23 17:49:07 SEVERE MeasTable::dUTC(Double) (file ../../measures/Measures/MeasTable.cc, line 4290)+ times and coordinates derived from UTC could be wrong by 1s or more. |
| 23-Oct-2026 13:49:06 | 2026-10-23 17:49:07 INFO msmetadata_cmpt.cc::open Performing internal consistency checks on twhya.short.ms... |
| 23-Oct-2026 13:49:06 | test_tool_synthesisutils.py::advisechansel_test::test_advisechanelsel_datasel |
| 23-Oct-2026 13:49:06 | Test that data selection parameters or given frequency range, etc is returned correctly |
| 23-Oct-2026 13:49:06 | PASSED |
| 23-Oct-2026 13:49:06 | |
| 23-Oct-2026 13:49:07 | test_tool_synthesisutils.py::advisechansel_test::test_advisechanelsel_datasel_ephem |
| 23-Oct-2026 13:49:07 | Test that data selection parameters for given frequency range,etc for ephemeris object is returned correctly |
| 23-Oct-2026 13:49:07 | PASSED |
| 23-Oct-2026 13:49:07 | |
| 23-Oct-2026 13:49:07 | 2026-10-23 17:49:08 SEVERE No MeasurementSet has been assigned, please give a valid ms in msname |
| 23-Oct-2026 13:49:07 | test_tool_synthesisutils.py::advisechansel_test::test_su_adivsechanel_defaults |
| 23-Oct-2026 13:49:07 | Test non specified parameter case for proper error/warning message |
| 23-Oct-2026 13:49:07 | PASSED |
| 23-Oct-2026 13:49:07 | |
| 23-Oct-2026 13:49:08 | test_tool_synthesisutils.py::advisechansel_test::test_su_adivsechansel_getfreqrange |
| 23-Oct-2026 13:49:08 | Test that frequency range for given data selections is returned correctly |
| 23-Oct-2026 13:49:08 | PASSED |
| 23-Oct-2026 13:49:08 | |
| 23-Oct-2026 13:49:08 | test_tool_synthesisutils.py::advisechansel_test::test_su_advisechansel_getfreqrange_ephem |
| 23-Oct-2026 13:49:08 | Test that frequency range for given data selections for an ephemeris object is returned correctly |
| 23-Oct-2026 13:49:08 | 2026-10-23 17:49:09 INFO name:: No table opened. |
| 23-Oct-2026 13:49:08 | 2026-10-23 17:49:09 INFO name:: No table opened. |
| 23-Oct-2026 13:49:08 | PASSED |
| 23-Oct-2026 13:49:08 | |
| 23-Oct-2026 13:49:08 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_synthesisutils/nose.xml - |
| 23-Oct-2026 13:49:08 | ======================== 13 passed, 1 warning in 4.70s ========================= |
| 23-Oct-2026 13:49:09 | ============================= test session starts ============================== |
| 23-Oct-2026 13:49:09 | platform darwin -- Python 3.12.8, pytest-9.1.1, pluggy-1.7.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6testenv/bin/python3.12 |
| 23-Oct-2026 13:49:09 | cachedir: .pytest_cache |
| 23-Oct-2026 13:49:09 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_linearmosaic |
| 23-Oct-2026 13:49:09 | configfile: pytest.ini |
| 23-Oct-2026 13:49:10 | collecting ... collected 5 items |
| 23-Oct-2026 13:49:10 | |
| 23-Oct-2026 13:49:10 | |
| 23-Oct-2026 13:49:10 | 2026-10-23 17:49:11 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 23-Oct-2026 13:49:10 | 2026-10-23 17:49:11 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 23-Oct-2026 13:49:11 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_noise |
| 23-Oct-2026 13:49:11 | test_flat_noise (flat noise type with flat noise input) |
| 23-Oct-2026 13:49:11 | PASSED |
| 23-Oct-2026 13:49:11 | |
| 23-Oct-2026 13:49:11 | 2026-10-23 17:49:11 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 23-Oct-2026 13:49:11 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_noise_existing_image |
| 23-Oct-2026 13:49:11 | test_flat_noise_existing image (flat noise type onto an existing image) |
| 23-Oct-2026 13:49:11 | PASSED |
| 23-Oct-2026 13:49:11 | |
| 23-Oct-2026 13:49:11 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_noise_flat_sky_input |
| 23-Oct-2026 13:49:11 | test_flat_noise_flat_sky_input (flat noise type with flat sky input) |
| 23-Oct-2026 13:49:11 | PASSED |
| 23-Oct-2026 13:49:11 | |
| 23-Oct-2026 13:49:12 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_sky |
| 23-Oct-2026 13:49:12 | test_flat_sky (flat sky type with flat noise input |
| 23-Oct-2026 13:49:12 | PASSED |
| 23-Oct-2026 13:49:12 | |
| 23-Oct-2026 13:49:13 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_sky_flat_sky_input |
| 23-Oct-2026 13:49:13 | test_flat_sky_flat_sky_input (flat sky type with flat sky inputs) |
| 23-Oct-2026 13:49:13 | PASSED |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_linearmosaic/nose.xml - |
| 23-Oct-2026 13:49:13 | ========================= 5 passed, 1 warning in 4.30s ========================= |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_image_regrid/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calanalysis/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calanalysis |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_calanalysis/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calanalysis/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_quanta/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_quanta |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_quanta/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_quanta/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_logsink/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_logsink |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_logsink/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_logsink/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_msuvbinner |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_msuvbinner/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image_deviation |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_image_deviation/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_componentlist |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_componentlist/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_measures/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_measures |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_measures/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_measures/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image_statistics/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image_statistics |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_image_statistics/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image_statistics/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_ms_statwt |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_ms_statwt/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image_subimage/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image_subimage |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_image_subimage/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image_subimage/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_coordsys/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_coordsys |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_coordsys/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_coordsys/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_image/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_imagepol |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_agentflagger |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_agentflagger/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_ms_createmultims |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_ms_createmultims/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_sdm_toms/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_sdm_toms |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_sdm_toms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_sdm_toms/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_sdm |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_sdm/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image_pbcor |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_image_pbcor/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_ms/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_ms |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_ms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_ms/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image_pv |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_image_pv/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_msmetadata |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_msmetadata/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_synthesisutils/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_synthesisutils |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_synthesisutils/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_synthesisutils/ |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
| 23-Oct-2026 13:49:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_linearmosaic |
| 23-Oct-2026 13:49:13 | |
| 23-Oct-2026 13:49:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/xml/test_tool_linearmosaic/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
| 23-Oct-2026 13:49:13 | Finished task 'Test wheel' with result: Success |
| 23-Oct-2026 13:49:13 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
| 23-Oct-2026 13:49:13 | Parsing test results under /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR239-TTO14... |
| 23-Oct-2026 13:49:13 | Finished task 'Parse tests' with result: Success |
| 23-Oct-2026 13:49:13 | Running post build plugin 'Docker Container Cleanup' |
| 23-Oct-2026 13:49:13 | Running post build plugin 'NCover Results Collector' |
| 23-Oct-2026 13:49:13 | Running post build plugin 'Build Results Label Collector' |
| 23-Oct-2026 13:49:13 | Running post build plugin 'Clover Results Collector' |
| 23-Oct-2026 13:49:13 | Running post build plugin 'npm Cache Cleanup' |
| 23-Oct-2026 13:49:13 | Running post build plugin 'Artifact Copier' |
| 23-Oct-2026 13:49:13 | Publishing an artifact: macOS15 casatools wheel |
| 23-Oct-2026 13:49:16 | Finished publishing of artifact Non required job artifact Http Compression On : [macOS15 casatools wheel], patterns: [casatools*.whl] anchored at: [wheeldirectory/] in 2.941 s |
| 23-Oct-2026 13:49:16 | Finalising the build... |
| 23-Oct-2026 13:49:16 | Stopping timer. |
| 23-Oct-2026 13:49:16 | Build CASASPECS-PR239-TTO14-2 completed. |
| 23-Oct-2026 13:49:16 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
| 23-Oct-2026 13:49:16 | Running on server: post build plugin 'NCover Results Collector' |
| 23-Oct-2026 13:49:16 | Running on server: post build plugin 'Build Labeller' |
| 23-Oct-2026 13:49:16 | Running on server: post build plugin 'Clover Delta Calculator' |
| 23-Oct-2026 13:49:16 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
| 23-Oct-2026 13:49:16 | All post build plugins have finished |
| 23-Oct-2026 13:49:16 | Generating build results summary... |
| 23-Oct-2026 13:49:17 | Saving build results to disk... |
| 23-Oct-2026 13:49:17 | Store variable context... |
| 23-Oct-2026 13:49:17 | Finished building CASASPECS-PR239-TTO14-2. |