Build: #2 was successful
Job: Test Tasks macOS15 was successful
Build log
The build generated 64,938 lines of output. The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
| 02-Oct-2026 15:54:14 | test_effdishdiam |
| 02-Oct-2026 15:54:14 | ------------------ |
| 02-Oct-2026 15:54:14 | |
| 02-Oct-2026 15:54:14 | Check that chaging the effective dish diameter results in differing image files |
| 02-Oct-2026 15:54:14 | PASSED |
| 02-Oct-2026 15:54:14 | |
| 02-Oct-2026 15:54:14 | test_task_feather.py::feather_test::test_highres |
| 02-Oct-2026 15:54:14 | test_highres |
| 02-Oct-2026 15:54:14 | -------------- |
| 02-Oct-2026 15:54:14 | |
| 02-Oct-2026 15:54:14 | Check that the interferometric image is provided with this parameter |
| 02-Oct-2026 15:54:14 | This parameter is nessisary to run the task |
| 02-Oct-2026 15:54:14 | PASSED |
| 02-Oct-2026 15:54:14 | |
| 02-Oct-2026 15:54:14 | 2026-10-02 19:54:15 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 02-Oct-2026 15:54:14 | 2026-10-02 19:54:15 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 02-Oct-2026 15:54:14 | test_task_feather.py::feather_test::test_imagename |
| 02-Oct-2026 15:54:14 | test_imagename |
| 02-Oct-2026 15:54:14 | ---------------- |
| 02-Oct-2026 15:54:14 | |
| 02-Oct-2026 15:54:14 | Check that the imagename parameter gives the name of the output image file |
| 02-Oct-2026 15:54:14 | PASSED |
| 02-Oct-2026 15:54:14 | |
| 02-Oct-2026 15:54:14 | 2026-10-02 19:54:15 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 02-Oct-2026 15:54:14 | 2026-10-02 19:54:15 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 02-Oct-2026 15:54:15 | test_task_feather.py::feather_test::test_lowpassfiltersd |
| 02-Oct-2026 15:54:15 | test_lowpassfiltersd |
| 02-Oct-2026 15:54:15 | ---------------------- |
| 02-Oct-2026 15:54:15 | |
| 02-Oct-2026 15:54:15 | Check that lowpassfiltersd = True results in a different image than the default |
| 02-Oct-2026 15:54:15 | PASSED |
| 02-Oct-2026 15:54:15 | |
| 02-Oct-2026 15:54:15 | test_task_feather.py::feather_test::test_lowres |
| 02-Oct-2026 15:54:15 | test_lowres |
| 02-Oct-2026 15:54:15 | ------------- |
| 02-Oct-2026 15:54:15 | |
| 02-Oct-2026 15:54:15 | Check that the single dish image is provided with this parameter |
| 02-Oct-2026 15:54:15 | This parameter is nessisary to run the task |
| 02-Oct-2026 15:54:15 | PASSED |
| 02-Oct-2026 15:54:15 | |
| 02-Oct-2026 15:54:15 | 2026-10-02 19:54:15 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 02-Oct-2026 15:54:15 | 2026-10-02 19:54:15 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 02-Oct-2026 15:54:15 | 2026-10-02 19:54:15 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 02-Oct-2026 15:54:15 | test_task_feather.py::feather_test::test_perplanebeam |
| 02-Oct-2026 15:54:15 | test_perplanebeam |
| 02-Oct-2026 15:54:15 | ---------------------- |
| 02-Oct-2026 15:54:15 | Check that feather works with cubes with perplanebeams |
| 02-Oct-2026 15:54:15 | PASSED |
| 02-Oct-2026 15:54:15 | |
| 02-Oct-2026 15:54:15 | 2026-10-02 19:54:15 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 02-Oct-2026 15:54:15 | 2026-10-02 19:54:15 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 02-Oct-2026 15:54:15 | test_task_feather.py::feather_test::test_sdfactor |
| 02-Oct-2026 15:54:15 | test_sdfactor |
| 02-Oct-2026 15:54:15 | --------------- |
| 02-Oct-2026 15:54:15 | |
| 02-Oct-2026 15:54:15 | Check that differing sdfactors results in differing image files |
| 02-Oct-2026 15:54:15 | PASSED |
| 02-Oct-2026 15:54:15 | |
| 02-Oct-2026 15:54:15 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_feather/nose.xml - |
| 02-Oct-2026 15:54:15 | ========================= 9 passed, 1 warning in 4.35s ========================= |
| 02-Oct-2026 15:54:15 | ============================= test session starts ============================== |
| 02-Oct-2026 15:54:15 | platform darwin -- Python 3.12.8, pytest-9.1.1, pluggy-1.6.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6testenv/bin/python3.12 |
| 02-Oct-2026 15:54:15 | cachedir: .pytest_cache |
| 02-Oct-2026 15:54:15 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit |
| 02-Oct-2026 15:54:15 | configfile: pytest.ini |
| 02-Oct-2026 15:54:18 | collecting ... collected 13 items |
| 02-Oct-2026 15:54:18 | |
| 02-Oct-2026 15:54:18 | |
| 02-Oct-2026 15:54:18 | 2026-10-02 19:54:19 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:18 | test_task_uvmodelfit.py::uvmodelfit_test::test_antennaSelect There are 980 - 3 = 977 degrees of freedom. |
| 02-Oct-2026 15:54:18 | iter=0: reduced chi2=0.501236: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:18 | iter=1: reduced chi2=1.77453e-05: I=0.0013145, dir=[8.95583e-05, 7.85388e-06] arcsec |
| 02-Oct-2026 15:54:18 | iter=2: reduced chi2=1.72377e-05: I=0.000316343, dir=[0.0682531, 0.00598739] arcsec |
| 02-Oct-2026 15:54:18 | iter=3: reduced chi2=1.7211e-05: I=0.000338998, dir=[0.342586, 0.0353777] arcsec |
| 02-Oct-2026 15:54:18 | iter=4: reduced chi2=1.71964e-05: I=0.000416799, dir=[0.501573, 0.0803145] arcsec |
| 02-Oct-2026 15:54:18 | iter=5: reduced chi2=1.71922e-05: I=0.000444463, dir=[0.56108, 0.124786] arcsec |
| 02-Oct-2026 15:54:18 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:18 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:18 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:18 | I = 0.000444463 +/- 0.0451754 |
| 02-Oct-2026 15:54:18 | x = 0.56108 +/- 52.0831 arcsec |
| 02-Oct-2026 15:54:18 | y = 0.124786 +/- 45.3544 arcsec |
| 02-Oct-2026 15:54:18 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 02-Oct-2026 15:54:18 | 2026-10-02 19:54:19 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:18 | There are 980 - 3 = 977 degrees of freedom. |
| 02-Oct-2026 15:54:18 | iter=0: reduced chi2=0.501362: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:18 | iter=1: reduced chi2=3.658e-06: I=0.00117479, dir=[-9.53752e-05, -2.13624e-05] arcsec |
| 02-Oct-2026 15:54:18 | iter=2: reduced chi2=3.15144e-06: I=0.000176508, dir=[-0.0813117, -0.0182157] arcsec |
| 02-Oct-2026 15:54:18 | iter=3: reduced chi2=3.12506e-06: I=0.000211294, dir=[-0.564185, -0.143054] arcsec |
| 02-Oct-2026 15:54:18 | iter=4: reduced chi2=3.1118e-06: I=0.000332861, dir=[-0.627584, -0.268863] arcsec |
| 02-Oct-2026 15:54:19 | iter=5: reduced chi2=3.11016e-06: I=0.000350381, dir=[-0.647598, -0.32336] arcsec |
| 02-Oct-2026 15:54:19 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:19 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:19 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:19 | I = 0.000350381 +/- 0.0451754 |
| 02-Oct-2026 15:54:19 | x = -0.647598 +/- 60.3425 arcsec |
| 02-Oct-2026 15:54:19 | y = -0.32336 +/- 58.0239 arcsec |
| 02-Oct-2026 15:54:19 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 02-Oct-2026 15:54:19 | |
| 02-Oct-2026 15:54:19 | test_antennaSelect |
| 02-Oct-2026 15:54:19 | -------------------- |
| 02-Oct-2026 15:54:19 | |
| 02-Oct-2026 15:54:19 | Check that this parameter allows for selection based on the antenna name or id |
| 02-Oct-2026 15:54:19 | NOTE: Using just the antenna selection will raise an error saying that multiple fields are being used |
| 02-Oct-2026 15:54:19 | PASSED |
| 02-Oct-2026 15:54:19 | |
| 02-Oct-2026 15:54:19 | 2026-10-02 19:54:19 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:19 | test_task_uvmodelfit.py::uvmodelfit_test::test_comptype There are 24500 - 6 = 24494 degrees of freedom. |
| 02-Oct-2026 15:54:19 | iter=0: reduced chi2=0.223315: I=1, dir=[1, 1] arcsec, shape=[1, 1, 1] |
| 02-Oct-2026 15:54:19 | iter=1: reduced chi2=9.05439e-06: I=0.00306779, dir=[0.999972, 1.00001] arcsec, shape=[1.0055, 1, 1] |
| 02-Oct-2026 15:54:19 | iter=2: reduced chi2=6.97053e-06: I=1.60849e-05, dir=[0.99084, 1.00466] arcsec, shape=[1.00218, 1, 1] |
| 02-Oct-2026 15:54:19 | iter=3: reduced chi2=6.9699e-06: I=1.33396e-05, dir=[-0.745309, 1.87644] arcsec, shape=[0.156091, 1, 1] |
| 02-Oct-2026 15:54:19 | iter=4: reduced chi2=6.96891e-06: I=3.35394e-05, dir=[-0.823118, 2.03554] arcsec, shape=[1.53467, 1, 1] |
| 02-Oct-2026 15:54:19 | iter=5: reduced chi2=6.96758e-06: I=5.89415e-05, dir=[-0.837836, 2.22716] arcsec, shape=[1.85014, 1, 1] |
| 02-Oct-2026 15:54:19 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:19 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:19 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:19 | I = 5.89415e-05 +/- 0.0399385 |
| 02-Oct-2026 15:54:19 | x = -0.837836 +/- 279.197 arcsec |
| 02-Oct-2026 15:54:19 | y = 2.22716 +/- 263.672 arcsec |
| 02-Oct-2026 15:54:19 | a = 1.85014 +/- 2920.53 arcsec |
| 02-Oct-2026 15:54:19 | r = 1 +/- 1927.24 |
| 02-Oct-2026 15:54:19 | p = 1 +/- 57.2958 deg |
| 02-Oct-2026 15:54:19 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 02-Oct-2026 15:54:19 | 2026-10-02 19:54:19 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:19 | There are 24500 - 6 = 24494 degrees of freedom. |
| 02-Oct-2026 15:54:19 | iter=0: reduced chi2=0.115118: I=1, dir=[1, 1] arcsec, shape=[1, 1, 1] |
| 02-Oct-2026 15:54:19 | iter=1: reduced chi2=7.48282e-06: I=0.00211933, dir=[0.999935, 1.00006] arcsec, shape=[1.00134, 1, 1] |
| 02-Oct-2026 15:54:19 | iter=2: reduced chi2=6.97053e-06: I=3.76991e-05, dir=[0.969151, 1.02795] arcsec, shape=[1.01162, 1, 1] |
| 02-Oct-2026 15:54:19 | iter=3: reduced chi2=6.96848e-06: I=4.99042e-05, dir=[-0.814741, 2.65048] arcsec, shape=[1.93255, 1, 1] |
| 02-Oct-2026 15:54:19 | iter=4: reduced chi2=6.96635e-06: I=9.04344e-05, dir=[-0.521044, 2.2073] arcsec, shape=[1.30367, 0.871477, 1] |
| 02-Oct-2026 15:54:19 | iter=5: reduced chi2=6.96483e-06: I=0.000124177, dir=[-0.518584, 2.29109] arcsec, shape=[1.35875, 1, 18.5073] |
| 02-Oct-2026 15:54:19 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:19 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:19 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:19 | I = 0.000124177 +/- 0.0356416 |
| 02-Oct-2026 15:54:19 | x = -0.518584 +/- 171.745 arcsec |
| 02-Oct-2026 15:54:19 | y = 2.29109 +/- 165.21 arcsec |
| 02-Oct-2026 15:54:19 | a = 1.35875 +/- 425.283 arcsec |
| 02-Oct-2026 15:54:19 | r = 1 +/- 444.81 |
| 02-Oct-2026 15:54:19 | p = 18.5073 +/- 57.2958 deg |
| 02-Oct-2026 15:54:19 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 02-Oct-2026 15:54:19 | |
| 02-Oct-2026 15:54:19 | test_comptype |
| 02-Oct-2026 15:54:19 | --------------- |
| 02-Oct-2026 15:54:19 | |
| 02-Oct-2026 15:54:19 | Check that the comptype parameter changes the component model type |
| 02-Oct-2026 15:54:19 | PASSED |
| 02-Oct-2026 15:54:19 | |
| 02-Oct-2026 15:54:19 | 2026-10-02 19:54:19 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:19 | test_task_uvmodelfit.py::uvmodelfit_test::test_fieldSelect There are 24500 - 3 = 24497 degrees of freedom. |
| 02-Oct-2026 15:54:19 | iter=0: reduced chi2=0.500026: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:19 | iter=1: reduced chi2=1.30279e-06: I=0.00103511, dir=[-2.3514e-06, -6.82833e-07] arcsec |
| 02-Oct-2026 15:54:19 | iter=2: reduced chi2=8.03765e-07: I=3.66475e-05, dir=[-0.00227513, -0.000660685] arcsec |
| 02-Oct-2026 15:54:19 | iter=3: reduced chi2=8.03717e-07: I=3.61935e-05, dir=[-0.066776, -0.0192953] arcsec |
| 02-Oct-2026 15:54:19 | iter=4: reduced chi2=8.03657e-07: I=3.75341e-05, dir=[-0.138375, -0.0379022] arcsec |
| 02-Oct-2026 15:54:19 | iter=5: reduced chi2=8.03594e-07: I=3.9096e-05, dir=[-0.209874, -0.056095] arcsec |
| 02-Oct-2026 15:54:19 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:19 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:19 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:19 | I = 3.9096e-05 +/- 0.00903508 |
| 02-Oct-2026 15:54:19 | x = -0.209874 +/- 83.8907 arcsec |
| 02-Oct-2026 15:54:19 | y = -0.056095 +/- 73.5601 arcsec |
| 02-Oct-2026 15:54:19 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 02-Oct-2026 15:54:19 | 2026-10-02 19:54:20 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:19 | There are 24500 - 3 = 24497 degrees of freedom. |
| 02-Oct-2026 15:54:19 | iter=0: reduced chi2=0.50007: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:19 | iter=1: reduced chi2=7.46871e-06: I=0.000996844, dir=[-1.76161e-06, -2.03276e-06] arcsec |
| 02-Oct-2026 15:54:19 | iter=2: reduced chi2=6.96965e-06: I=-1.66014e-06, dir=[-0.00176984, -0.00204231] arcsec |
| 02-Oct-2026 15:54:19 | iter=3: reduced chi2=6.96965e-06: I=-1.67684e-06, dir=[0.0389955, 0.046368] arcsec |
| 02-Oct-2026 15:54:19 | iter=4: reduced chi2=6.96964e-06: I=-1.79695e-06, dir=[0.11497, 0.0783099] arcsec |
| 02-Oct-2026 15:54:19 | iter=5: reduced chi2=6.96964e-06: I=-2.16021e-06, dir=[0.264308, 0.0633136] arcsec |
| 02-Oct-2026 15:54:19 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:19 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:19 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:19 | I = -2.16021e-06 +/- 0.00903508 |
| 02-Oct-2026 15:54:19 | x = 0.264308 +/- 1518.11 arcsec |
| 02-Oct-2026 15:54:19 | y = 0.0633136 +/- 1331.3 arcsec |
| 02-Oct-2026 15:54:19 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 02-Oct-2026 15:54:19 | |
| 02-Oct-2026 15:54:19 | test_fieldSelect |
| 02-Oct-2026 15:54:19 | ------------------- |
| 02-Oct-2026 15:54:19 | |
| 02-Oct-2026 15:54:19 | Check that the field parameter properly selects fields by name or by id |
| 02-Oct-2026 15:54:19 | TODO find out what is wrong with selecting multiple fields |
| 02-Oct-2026 15:54:19 | PASSED |
| 02-Oct-2026 15:54:19 | |
| 02-Oct-2026 15:54:19 | 2026-10-02 19:54:20 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:19 | test_task_uvmodelfit.py::uvmodelfit_test::test_niter There are 24500 - 3 = 24497 degrees of freedom. |
| 02-Oct-2026 15:54:19 | iter=0: reduced chi2=0.50007: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:19 | iter=1: reduced chi2=7.46871e-06: I=0.000996844, dir=[-1.76161e-06, -2.03276e-06] arcsec |
| 02-Oct-2026 15:54:19 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:19 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:19 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:19 | I = 0.000996844 +/- 0.00903508 |
| 02-Oct-2026 15:54:19 | x = -1.76161e-06 +/- 3.28982 arcsec |
| 02-Oct-2026 15:54:19 | y = -2.03276e-06 +/- 2.88499 arcsec |
| 02-Oct-2026 15:54:19 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 02-Oct-2026 15:54:19 | 2026-10-02 19:54:20 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:19 | There are 24500 - 3 = 24497 degrees of freedom. |
| 02-Oct-2026 15:54:19 | iter=0: reduced chi2=0.50007: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:19 | iter=1: reduced chi2=7.46871e-06: I=0.000996844, dir=[-1.76161e-06, -2.03276e-06] arcsec |
| 02-Oct-2026 15:54:19 | iter=2: reduced chi2=6.96965e-06: I=-1.66014e-06, dir=[-0.00176984, -0.00204231] arcsec |
| 02-Oct-2026 15:54:19 | iter=3: reduced chi2=6.96965e-06: I=-1.67684e-06, dir=[0.0389955, 0.046368] arcsec |
| 02-Oct-2026 15:54:19 | iter=4: reduced chi2=6.96964e-06: I=-1.79695e-06, dir=[0.11497, 0.0783099] arcsec |
| 02-Oct-2026 15:54:19 | iter=5: reduced chi2=6.96964e-06: I=-2.16021e-06, dir=[0.264308, 0.0633136] arcsec |
| 02-Oct-2026 15:54:19 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:19 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:19 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:19 | I = -2.16021e-06 +/- 0.00903508 |
| 02-Oct-2026 15:54:19 | x = 0.264308 +/- 1518.11 arcsec |
| 02-Oct-2026 15:54:19 | y = 0.0633136 +/- 1331.3 arcsec |
| 02-Oct-2026 15:54:19 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 02-Oct-2026 15:54:19 | |
| 02-Oct-2026 15:54:19 | test_niter |
| 02-Oct-2026 15:54:19 | ----------- |
| 02-Oct-2026 15:54:19 | |
| 02-Oct-2026 15:54:19 | Check that the number of niter parameter selects the number of iterations uvmodelfit runs |
| 02-Oct-2026 15:54:19 | PASSED |
| 02-Oct-2026 15:54:19 | |
| 02-Oct-2026 15:54:19 | 2026-10-02 19:54:20 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:19 | test_task_uvmodelfit.py::uvmodelfit_test::test_outfile There are 24500 - 3 = 24497 degrees of freedom. |
| 02-Oct-2026 15:54:19 | iter=0: reduced chi2=0.50007: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:19 | iter=1: reduced chi2=7.46871e-06: I=0.000996844, dir=[-1.76161e-06, -2.03276e-06] arcsec |
| 02-Oct-2026 15:54:19 | iter=2: reduced chi2=6.96965e-06: I=-1.66014e-06, dir=[-0.00176984, -0.00204231] arcsec |
| 02-Oct-2026 15:54:20 | iter=3: reduced chi2=6.96965e-06: I=-1.67684e-06, dir=[0.0389955, 0.046368] arcsec |
| 02-Oct-2026 15:54:20 | iter=4: reduced chi2=6.96964e-06: I=-1.79695e-06, dir=[0.11497, 0.0783099] arcsec |
| 02-Oct-2026 15:54:20 | iter=5: reduced chi2=6.96964e-06: I=-2.16021e-06, dir=[0.264308, 0.0633136] arcsec |
| 02-Oct-2026 15:54:20 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:20 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:20 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:20 | I = -2.16021e-06 +/- 0.00903508 |
| 02-Oct-2026 15:54:20 | x = 0.264308 +/- 1518.11 arcsec |
| 02-Oct-2026 15:54:20 | y = 0.0633136 +/- 1331.3 arcsec |
| 02-Oct-2026 15:54:20 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 02-Oct-2026 15:54:20 | |
| 02-Oct-2026 15:54:20 | test_outfile |
| 02-Oct-2026 15:54:20 | -------------- |
| 02-Oct-2026 15:54:20 | |
| 02-Oct-2026 15:54:20 | Check that the task creates an output file when specified with the output parameter |
| 02-Oct-2026 15:54:20 | PASSED |
| 02-Oct-2026 15:54:20 | |
| 02-Oct-2026 15:54:20 | 2026-10-02 19:54:20 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:20 | test_task_uvmodelfit.py::uvmodelfit_test::test_scanSelect There are 24500 - 3 = 24497 degrees of freedom. |
| 02-Oct-2026 15:54:20 | iter=0: reduced chi2=0.50007: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:20 | iter=1: reduced chi2=7.46871e-06: I=0.000996844, dir=[-1.76161e-06, -2.03276e-06] arcsec |
| 02-Oct-2026 15:54:20 | iter=2: reduced chi2=6.96965e-06: I=-1.66014e-06, dir=[-0.00176984, -0.00204231] arcsec |
| 02-Oct-2026 15:54:20 | iter=3: reduced chi2=6.96965e-06: I=-1.67684e-06, dir=[0.0389955, 0.046368] arcsec |
| 02-Oct-2026 15:54:20 | iter=4: reduced chi2=6.96964e-06: I=-1.79695e-06, dir=[0.11497, 0.0783099] arcsec |
| 02-Oct-2026 15:54:20 | iter=5: reduced chi2=6.96964e-06: I=-2.16021e-06, dir=[0.264308, 0.0633136] arcsec |
| 02-Oct-2026 15:54:20 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:20 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:20 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:20 | I = -2.16021e-06 +/- 0.00903508 |
| 02-Oct-2026 15:54:20 | x = 0.264308 +/- 1518.11 arcsec |
| 02-Oct-2026 15:54:20 | y = 0.0633136 +/- 1331.3 arcsec |
| 02-Oct-2026 15:54:20 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 02-Oct-2026 15:54:20 | 2026-10-02 19:54:20 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:20 | There are 24500 - 3 = 24497 degrees of freedom. |
| 02-Oct-2026 15:54:20 | iter=0: reduced chi2=0.499978: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:20 | iter=1: reduced chi2=1.63087e-05: I=0.00109826, dir=[8.44869e-08, -1.13222e-05] arcsec |
| 02-Oct-2026 15:54:20 | iter=2: reduced chi2=1.58096e-05: I=9.98546e-05, dir=[7.69394e-05, -0.0103262] arcsec |
| 02-Oct-2026 15:54:20 | iter=3: reduced chi2=1.58079e-05: I=0.000100536, dir=[-1.17067e-05, -0.12901] arcsec |
| 02-Oct-2026 15:54:20 | iter=4: reduced chi2=1.58045e-05: I=0.000117457, dir=[-0.0105881, -0.29339] arcsec |
| 02-Oct-2026 15:54:20 | iter=5: reduced chi2=1.58015e-05: I=0.00014519, dir=[-0.0319589, -0.428824] arcsec |
| 02-Oct-2026 15:54:20 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:20 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:20 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:20 | I = 0.00014519 +/- 0.00903508 |
| 02-Oct-2026 15:54:20 | x = -0.0319589 +/- 22.5851 arcsec |
| 02-Oct-2026 15:54:20 | y = -0.428824 +/- 19.8077 arcsec |
| 02-Oct-2026 15:54:20 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 02-Oct-2026 15:54:20 | |
| 02-Oct-2026 15:54:20 | test_scanSelect |
| 02-Oct-2026 15:54:20 | ----------------- |
| 02-Oct-2026 15:54:20 | |
| 02-Oct-2026 15:54:20 | Check that this parameter allows for seletion based on the scan id |
| 02-Oct-2026 15:54:20 | PASSED |
| 02-Oct-2026 15:54:20 | |
| 02-Oct-2026 15:54:20 | 2026-10-02 19:54:20 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:20 | test_task_uvmodelfit.py::uvmodelfit_test::test_selectData There are 24500 - 3 = 24497 degrees of freedom. |
| 02-Oct-2026 15:54:20 | iter=0: reduced chi2=0.50007: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:20 | iter=1: reduced chi2=7.46871e-06: I=0.000996844, dir=[-1.76161e-06, -2.03276e-06] arcsec |
| 02-Oct-2026 15:54:20 | iter=2: reduced chi2=6.96965e-06: I=-1.66014e-06, dir=[-0.00176984, -0.00204231] arcsec |
| 02-Oct-2026 15:54:20 | iter=3: reduced chi2=6.96965e-06: I=-1.67684e-06, dir=[0.0389955, 0.046368] arcsec |
| 02-Oct-2026 15:54:20 | iter=4: reduced chi2=6.96964e-06: I=-1.79695e-06, dir=[0.11497, 0.0783099] arcsec |
| 02-Oct-2026 15:54:20 | iter=5: reduced chi2=6.96964e-06: I=-2.16021e-06, dir=[0.264308, 0.0633136] arcsec |
| 02-Oct-2026 15:54:20 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:20 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:20 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:20 | I = -2.16021e-06 +/- 0.00903508 |
| 02-Oct-2026 15:54:20 | x = 0.264308 +/- 1518.11 arcsec |
| 02-Oct-2026 15:54:20 | y = 0.0633136 +/- 1331.3 arcsec |
| 02-Oct-2026 15:54:20 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 02-Oct-2026 15:54:20 | 2026-10-02 19:54:21 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:20 | There are 120 - 3 = 117 degrees of freedom. |
| 02-Oct-2026 15:54:20 | iter=0: reduced chi2=0.513046: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:20 | iter=1: reduced chi2=9.40374e-06: I=0.0007885, dir=[-0.0037039, -0.00478739] arcsec |
| 02-Oct-2026 15:54:20 | iter=2: reduced chi2=8.94083e-06: I=-0.000202281, dir=[-4.71361, -6.09448] arcsec |
| 02-Oct-2026 15:54:20 | iter=3: reduced chi2=8.91896e-06: I=-5.21638e-06, dir=[7.26954, 7.59266] arcsec |
| 02-Oct-2026 15:54:20 | iter=4: reduced chi2=8.83123e-06: I=-0.000368954, dir=[-281.448, -242.991] arcsec |
| 02-Oct-2026 15:54:20 | iter=5: reduced chi2=8.74547e-06: I=-0.000418384, dir=[-287.719, -251.083] arcsec |
| 02-Oct-2026 15:54:20 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:20 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:20 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:20 | I = -0.000418384 +/- 0.129099 |
| 02-Oct-2026 15:54:20 | x = -287.719 +/- 436.244 arcsec |
| 02-Oct-2026 15:54:20 | y = -251.083 +/- 539.275 arcsec |
| 02-Oct-2026 15:54:20 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 02-Oct-2026 15:54:20 | |
| 02-Oct-2026 15:54:20 | test_selectData |
| 02-Oct-2026 15:54:20 | ----------------- |
| 02-Oct-2026 15:54:20 | |
| 02-Oct-2026 15:54:20 | Allows for the use of the data selection parameters timerang, uvrange, antenna, scan, and msselect when True |
| 02-Oct-2026 15:54:20 | PASSED |
| 02-Oct-2026 15:54:20 | |
| 02-Oct-2026 15:54:20 | 2026-10-02 19:54:21 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:20 | test_task_uvmodelfit.py::uvmodelfit_test::test_sourcepar There are 24500 - 3 = 24497 degrees of freedom. |
| 02-Oct-2026 15:54:20 | iter=0: reduced chi2=0.50007: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:20 | iter=1: reduced chi2=7.46871e-06: I=0.000996844, dir=[-1.76161e-06, -2.03276e-06] arcsec |
| 02-Oct-2026 15:54:20 | iter=2: reduced chi2=6.96965e-06: I=-1.66014e-06, dir=[-0.00176984, -0.00204231] arcsec |
| 02-Oct-2026 15:54:20 | iter=3: reduced chi2=6.96965e-06: I=-1.67684e-06, dir=[0.0389955, 0.046368] arcsec |
| 02-Oct-2026 15:54:20 | iter=4: reduced chi2=6.96964e-06: I=-1.79695e-06, dir=[0.11497, 0.0783099] arcsec |
| 02-Oct-2026 15:54:20 | iter=5: reduced chi2=6.96964e-06: I=-2.16021e-06, dir=[0.264308, 0.0633136] arcsec |
| 02-Oct-2026 15:54:20 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:20 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:20 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:20 | I = -2.16021e-06 +/- 0.00903508 |
| 02-Oct-2026 15:54:20 | x = 0.264308 +/- 1518.11 arcsec |
| 02-Oct-2026 15:54:20 | y = 0.0633136 +/- 1331.3 arcsec |
| 02-Oct-2026 15:54:20 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 02-Oct-2026 15:54:20 | 2026-10-02 19:54:21 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:20 | There are 24500 - 3 = 24497 degrees of freedom. |
| 02-Oct-2026 15:54:20 | iter=0: reduced chi2=0.500062: I=1, dir=[1, 1] arcsec |
| 02-Oct-2026 15:54:20 | iter=1: reduced chi2=7.46868e-06: I=0.00100539, dir=[0.999992, 1] arcsec |
| 02-Oct-2026 15:54:20 | iter=2: reduced chi2=6.96963e-06: I=6.89253e-06, dir=[0.991957, 1.00281] arcsec |
| 02-Oct-2026 15:54:20 | iter=3: reduced chi2=6.96949e-06: I=6.96351e-06, dir=[-0.174069, 1.40248] arcsec |
| 02-Oct-2026 15:54:20 | iter=4: reduced chi2=6.96921e-06: I=2.56854e-05, dir=[0.214229, 1.38695] arcsec |
| 02-Oct-2026 15:54:20 | iter=5: reduced chi2=6.96919e-06: I=2.994e-05, dir=[0.173962, 1.38327] arcsec |
| 02-Oct-2026 15:54:20 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:20 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:20 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:20 | I = 2.994e-05 +/- 0.00903508 |
| 02-Oct-2026 15:54:20 | x = 0.173962 +/- 109.533 arcsec |
| 02-Oct-2026 15:54:20 | y = 1.38327 +/- 96.0549 arcsec |
| 02-Oct-2026 15:54:20 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 02-Oct-2026 15:54:20 | |
| 02-Oct-2026 15:54:20 | test_sourcepar |
| 02-Oct-2026 15:54:20 | ---------------- |
| 02-Oct-2026 15:54:20 | |
| 02-Oct-2026 15:54:20 | Check that sourcepar selects starting guess for component parameters |
| 02-Oct-2026 15:54:20 | PASSED |
| 02-Oct-2026 15:54:20 | |
| 02-Oct-2026 15:54:20 | 2026-10-02 19:54:21 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:21 | test_task_uvmodelfit.py::uvmodelfit_test::test_spwSelect There are 120250 - 3 = 120247 degrees of freedom. |
| 02-Oct-2026 15:54:21 | iter=0: reduced chi2=7.53424: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:21 | iter=1: reduced chi2=5.60908: I=0.00491201, dir=[0.00397324, 0.000426711] arcsec |
| 02-Oct-2026 15:54:21 | iter=2: reduced chi2=5.60904: I=0.00392362, dir=[0.822108, 0.081166] arcsec |
| 02-Oct-2026 15:54:21 | iter=3: reduced chi2=5.60903: I=0.00607976, dir=[3.01616, -1.14771] arcsec |
| 02-Oct-2026 15:54:21 | iter=4: reduced chi2=5.609: I=0.00620436, dir=[2.34701, 1.20117] arcsec |
| 02-Oct-2026 15:54:21 | iter=5: reduced chi2=5.60892: I=0.00758467, dir=[2.57163, 0.636844] arcsec |
| 02-Oct-2026 15:54:21 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:21 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:21 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:21 | I = 0.00758467 +/- 0.00207026 |
| 02-Oct-2026 15:54:21 | x = 2.57163 +/- 0.441119 arcsec |
| 02-Oct-2026 15:54:21 | y = 0.636844 +/- 0.400796 arcsec |
| 02-Oct-2026 15:54:21 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 02-Oct-2026 15:54:21 | 2026-10-02 19:54:22 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:21 | There are 120250 - 3 = 120247 degrees of freedom. |
| 02-Oct-2026 15:54:21 | iter=0: reduced chi2=7.51732: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:21 | iter=1: reduced chi2=5.74274: I=0.000542439, dir=[-0.00820008, -0.00879566] arcsec |
| 02-Oct-2026 15:54:21 | iter=2: reduced chi2=5.74274: I=-0.000361932, dir=[-14.2715, -15.2826] arcsec |
| 02-Oct-2026 15:54:22 | iter=3: reduced chi2=5.74274: I=-0.000196652, dir=[-0.856895, -18.97] arcsec |
| 02-Oct-2026 15:54:22 | iter=4: reduced chi2=5.74274: I=-0.000207681, dir=[2.06202, -19.1228] arcsec |
| 02-Oct-2026 15:54:22 | iter=5: reduced chi2=5.74273: I=-0.000254358, dir=[0.975174, -18.2686] arcsec |
| 02-Oct-2026 15:54:22 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:22 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:22 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:22 | I = -0.000254358 +/- 0.00216578 |
| 02-Oct-2026 15:54:22 | x = 0.975174 +/- 14.3472 arcsec |
| 02-Oct-2026 15:54:22 | y = -18.2686 +/- 12.2369 arcsec |
| 02-Oct-2026 15:54:22 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 02-Oct-2026 15:54:22 | |
| 02-Oct-2026 15:54:22 | test_spwSelect |
| 02-Oct-2026 15:54:22 | ---------------- |
| 02-Oct-2026 15:54:22 | |
| 02-Oct-2026 15:54:22 | Check that the spw parameter properly selects spectral windows |
| 02-Oct-2026 15:54:22 | PASSED |
| 02-Oct-2026 15:54:22 | |
| 02-Oct-2026 15:54:22 | 2026-10-02 19:54:22 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:22 | test_task_uvmodelfit.py::uvmodelfit_test::test_takesvis There are 24500 - 3 = 24497 degrees of freedom. |
| 02-Oct-2026 15:54:22 | iter=0: reduced chi2=0.500026: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:22 | iter=1: reduced chi2=1.30279e-06: I=0.00103511, dir=[-2.3514e-06, -6.82833e-07] arcsec |
| 02-Oct-2026 15:54:22 | iter=2: reduced chi2=8.03765e-07: I=3.66475e-05, dir=[-0.00227513, -0.000660685] arcsec |
| 02-Oct-2026 15:54:22 | iter=3: reduced chi2=8.03717e-07: I=3.61935e-05, dir=[-0.066776, -0.0192953] arcsec |
| 02-Oct-2026 15:54:22 | iter=4: reduced chi2=8.03657e-07: I=3.75341e-05, dir=[-0.138375, -0.0379022] arcsec |
| 02-Oct-2026 15:54:22 | iter=5: reduced chi2=8.03594e-07: I=3.9096e-05, dir=[-0.209874, -0.056095] arcsec |
| 02-Oct-2026 15:54:22 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:22 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:22 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:22 | I = 3.9096e-05 +/- 0.00903508 |
| 02-Oct-2026 15:54:22 | x = -0.209874 +/- 83.8907 arcsec |
| 02-Oct-2026 15:54:22 | y = -0.056095 +/- 73.5601 arcsec |
| 02-Oct-2026 15:54:22 | |
| 02-Oct-2026 15:54:22 | test_takesvis |
| 02-Oct-2026 15:54:22 | ----------------- |
| 02-Oct-2026 15:54:22 | |
| 02-Oct-2026 15:54:22 | Check that the task takes a valid visibility file |
| 02-Oct-2026 15:54:22 | PASSED |
| 02-Oct-2026 15:54:22 | |
| 02-Oct-2026 15:54:22 | 2026-10-02 19:54:23 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:22 | test_task_uvmodelfit.py::uvmodelfit_test::test_timerangeSelect There are 24500 - 3 = 24497 degrees of freedom. |
| 02-Oct-2026 15:54:22 | iter=0: reduced chi2=0.504128: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:22 | iter=1: reduced chi2=0.00132736: I=-0.00173421, dir=[-0.000110601, 4.91035e-05] arcsec |
| 02-Oct-2026 15:54:22 | iter=2: reduced chi2=0.00132666: I=-0.00273533, dir=[0.0636726, -0.028279] arcsec |
| 02-Oct-2026 15:54:22 | iter=3: reduced chi2=0.00132647: I=-0.00280967, dir=[0.11429, -0.0464787] arcsec |
| 02-Oct-2026 15:54:22 | iter=4: reduced chi2=0.00132621: I=-0.00287665, dir=[0.172625, -0.0644859] arcsec |
| 02-Oct-2026 15:54:22 | iter=5: reduced chi2=0.00132586: I=-0.00296507, dir=[0.240406, -0.0824503] arcsec |
| 02-Oct-2026 15:54:22 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:22 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:22 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:22 | I = -0.00296507 +/- 0.00903508 |
| 02-Oct-2026 15:54:22 | x = 0.240406 +/- 1.10742 arcsec |
| 02-Oct-2026 15:54:22 | y = -0.0824503 +/- 0.969818 arcsec |
| 02-Oct-2026 15:54:22 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 02-Oct-2026 15:54:22 | 2026-10-02 19:54:23 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:22 | There are 24500 - 3 = 24497 degrees of freedom. |
| 02-Oct-2026 15:54:22 | iter=0: reduced chi2=0.501728: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:22 | iter=1: reduced chi2=0.00217666: I=0.00150831, dir=[1.40788e-05, 9.95773e-06] arcsec |
| 02-Oct-2026 15:54:22 | iter=2: reduced chi2=0.00217616: I=0.000510322, dir=[0.00935402, 0.00661427] arcsec |
| 02-Oct-2026 15:54:22 | iter=3: reduced chi2=0.00217616: I=0.000511476, dir=[0.0392212, 0.0243698] arcsec |
| 02-Oct-2026 15:54:22 | iter=4: reduced chi2=0.00217615: I=0.000516714, dir=[0.0766723, 0.037258] arcsec |
| 02-Oct-2026 15:54:22 | iter=5: reduced chi2=0.00217615: I=0.000523594, dir=[0.124002, 0.0466822] arcsec |
| 02-Oct-2026 15:54:22 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:22 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:22 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:22 | I = 0.000523594 +/- 0.00903508 |
| 02-Oct-2026 15:54:22 | x = 0.124002 +/- 6.27964 arcsec |
| 02-Oct-2026 15:54:22 | y = 0.0466822 +/- 5.49192 arcsec |
| 02-Oct-2026 15:54:22 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 02-Oct-2026 15:54:22 | |
| 02-Oct-2026 15:54:22 | test_timerangeSelect |
| 02-Oct-2026 15:54:22 | ----------------------- |
| 02-Oct-2026 15:54:22 | |
| 02-Oct-2026 15:54:22 | Check that the timerange parameter properly selects the desired timerange |
| 02-Oct-2026 15:54:22 | PASSED |
| 02-Oct-2026 15:54:22 | |
| 02-Oct-2026 15:54:22 | 2026-10-02 19:54:23 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:22 | test_task_uvmodelfit.py::uvmodelfit_test::test_uvrangeSelect There are 3440 - 3 = 3437 degrees of freedom. |
| 02-Oct-2026 15:54:22 | iter=0: reduced chi2=0.500333: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:22 | iter=1: reduced chi2=4.73559e-05: I=0.00114933, dir=[-0.000549538, 1.07287e-05] arcsec |
| 02-Oct-2026 15:54:22 | iter=2: reduced chi2=4.68293e-05: I=0.000151181, dir=[-0.47899, 0.00933264] arcsec |
| 02-Oct-2026 15:54:22 | iter=3: reduced chi2=4.67821e-05: I=0.000332335, dir=[-4.03323, -0.0859994] arcsec |
| 02-Oct-2026 15:54:22 | iter=4: reduced chi2=4.65965e-05: I=0.000425135, dir=[-4.4663, -1.56114] arcsec |
| 02-Oct-2026 15:54:22 | iter=5: reduced chi2=4.64256e-05: I=0.00085118, dir=[-5.06439, -1.72933] arcsec |
| 02-Oct-2026 15:54:22 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:22 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:22 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:22 | I = 0.00085118 +/- 0.0241121 |
| 02-Oct-2026 15:54:22 | x = -5.06439 +/- 34.2969 arcsec |
| 02-Oct-2026 15:54:22 | y = -1.72933 +/- 31.3727 arcsec |
| 02-Oct-2026 15:54:22 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 02-Oct-2026 15:54:22 | 2026-10-02 19:54:23 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:22 | There are 8440 - 3 = 8437 degrees of freedom. |
| 02-Oct-2026 15:54:22 | iter=0: reduced chi2=0.500218: I=1, dir=[0, 0] arcsec |
| 02-Oct-2026 15:54:22 | iter=1: reduced chi2=1.47216e-06: I=0.000960188, dir=[2.69551e-05, 1.00754e-06] arcsec |
| 02-Oct-2026 15:54:22 | iter=2: reduced chi2=9.73043e-07: I=-3.835e-05, dir=[0.028114, 0.00105097] arcsec |
| 02-Oct-2026 15:54:22 | iter=3: reduced chi2=9.71377e-07: I=-3.62331e-05, dir=[-0.683209, -0.0300068] arcsec |
| 02-Oct-2026 15:54:22 | iter=4: reduced chi2=9.69616e-07: I=-8.21256e-05, dir=[-0.919942, 0.215778] arcsec |
| 02-Oct-2026 15:54:22 | iter=5: reduced chi2=9.69552e-07: I=-9.07441e-05, dir=[-0.957306, 0.215738] arcsec |
| 02-Oct-2026 15:54:22 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:22 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:22 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:22 | I = -9.07441e-05 +/- 0.0153937 |
| 02-Oct-2026 15:54:22 | x = -0.957306 +/- 91.656 arcsec |
| 02-Oct-2026 15:54:22 | y = 0.215738 +/- 89.4617 arcsec |
| 02-Oct-2026 15:54:22 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 02-Oct-2026 15:54:22 | |
| 02-Oct-2026 15:54:22 | test_uvrangeSelect |
| 02-Oct-2026 15:54:22 | -------------------- |
| 02-Oct-2026 15:54:22 | |
| 02-Oct-2026 15:54:22 | Check that the uvrange parameter properly select the uvranges |
| 02-Oct-2026 15:54:22 | PASSED |
| 02-Oct-2026 15:54:22 | |
| 02-Oct-2026 15:54:23 | 2026-10-02 19:54:23 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:23 | test_task_uvmodelfit.py::uvmodelfit_test::test_varypar There are 24500 - 3 = 24497 degrees of freedom. |
| 02-Oct-2026 15:54:23 | iter=0: reduced chi2=0.500062: I=1, dir=[1, 1] arcsec |
| 02-Oct-2026 15:54:23 | iter=1: reduced chi2=7.46868e-06: I=0.00100539, dir=[0.999992, 1] arcsec |
| 02-Oct-2026 15:54:23 | iter=2: reduced chi2=6.96963e-06: I=6.89253e-06, dir=[0.991957, 1.00281] arcsec |
| 02-Oct-2026 15:54:23 | iter=3: reduced chi2=6.96949e-06: I=6.96351e-06, dir=[-0.174069, 1.40248] arcsec |
| 02-Oct-2026 15:54:23 | iter=4: reduced chi2=6.96921e-06: I=2.56854e-05, dir=[0.214229, 1.38695] arcsec |
| 02-Oct-2026 15:54:23 | iter=5: reduced chi2=6.96919e-06: I=2.994e-05, dir=[0.173962, 1.38327] arcsec |
| 02-Oct-2026 15:54:23 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:23 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:23 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:23 | I = 2.994e-05 +/- 0.00903508 |
| 02-Oct-2026 15:54:23 | x = 0.173962 +/- 109.533 arcsec |
| 02-Oct-2026 15:54:23 | y = 1.38327 +/- 96.0549 arcsec |
| 02-Oct-2026 15:54:23 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 02-Oct-2026 15:54:23 | 2026-10-02 19:54:23 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:54:23 | There are 24500 - 1 = 24499 degrees of freedom. |
| 02-Oct-2026 15:54:23 | iter=0: reduced chi2=0.500021: I=1, dir=[1, 1] arcsec |
| 02-Oct-2026 15:54:23 | iter=1: reduced chi2=7.46808e-06: I=0.00100539, dir=[1, 1] arcsec |
| 02-Oct-2026 15:54:23 | iter=2: reduced chi2=6.96906e-06: I=6.89195e-06, dir=[1, 1] arcsec |
| 02-Oct-2026 15:54:23 | iter=3: reduced chi2=6.96906e-06: I=6.39283e-06, dir=[1, 1] arcsec |
| 02-Oct-2026 15:54:23 | iter=4: reduced chi2=6.96906e-06: I=6.3927e-06, dir=[1, 1] arcsec |
| 02-Oct-2026 15:54:23 | iter=5: reduced chi2=6.96906e-06: I=6.3927e-06, dir=[1, 1] arcsec |
| 02-Oct-2026 15:54:23 | If data weights are arbitrarily scaled, the following formal errors |
| 02-Oct-2026 15:54:23 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 02-Oct-2026 15:54:23 | the fit is systematically poor, the errors are much worse. |
| 02-Oct-2026 15:54:23 | I = 6.3927e-06 +/- 0.00903508 |
| 02-Oct-2026 15:54:23 | x = 1 +/- 0 arcsec |
| 02-Oct-2026 15:54:23 | y = 1 +/- 0 arcsec |
| 02-Oct-2026 15:54:23 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 02-Oct-2026 15:54:23 | |
| 02-Oct-2026 15:54:23 | test_varypar |
| 02-Oct-2026 15:54:23 | -------------- |
| 02-Oct-2026 15:54:23 | |
| 02-Oct-2026 15:54:23 | Check that varypar selects which parameters to let vary the fit |
| 02-Oct-2026 15:54:23 | PASSED |
| 02-Oct-2026 15:54:23 | |
| 02-Oct-2026 15:54:23 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_uvmodelfit/nose.xml - |
| 02-Oct-2026 15:54:23 | ======================== 13 passed, 1 warning in 7.54s ========================= |
| 02-Oct-2026 15:54:23 | ============================= test session starts ============================== |
| 02-Oct-2026 15:54:23 | platform darwin -- Python 3.12.8, pytest-9.1.1, pluggy-1.6.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6testenv/bin/python3.12 |
| 02-Oct-2026 15:54:23 | cachedir: .pytest_cache |
| 02-Oct-2026 15:54:23 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_fringefit |
| 02-Oct-2026 15:54:23 | configfile: pytest.ini |
| 02-Oct-2026 15:54:26 | collecting ... collected 14 items |
| 02-Oct-2026 15:54:26 | |
| 02-Oct-2026 15:54:26 | |
| 02-Oct-2026 15:54:27 | 2026-10-02 19:54:27 SEVERE MeasTable::dUTC(Double) (file ../../measures/Measures/MeasTable.cc, line 4290) Leap second table TAI_UTC seems out-of-date. |
| 02-Oct-2026 15:54:27 | 2026-10-02 19:54:27 SEVERE MeasTable::dUTC(Double) (file ../../measures/Measures/MeasTable.cc, line 4290)+ Until the table is updated (see the CASA documentation or your system admin), |
| 02-Oct-2026 15:54:27 | 2026-10-02 19:54:27 SEVERE MeasTable::dUTC(Double) (file ../../measures/Measures/MeasTable.cc, line 4290)+ times and coordinates derived from UTC could be wrong by 1s or more. |
| 02-Oct-2026 15:54:28 | test_task_fringefit.py::Fringefit_tests::test_mbd |
| 02-Oct-2026 15:54:28 | Just the basics |
| 02-Oct-2026 15:54:28 | |
| 02-Oct-2026 15:54:28 | Testing column TIME |
| 02-Oct-2026 15:54:28 | Column TIME PASSED |
| 02-Oct-2026 15:54:28 | |
| 02-Oct-2026 15:54:28 | Testing column FIELD_ID |
| 02-Oct-2026 15:54:28 | Column FIELD_ID PASSED |
| 02-Oct-2026 15:54:28 | |
| 02-Oct-2026 15:54:28 | Testing column SPECTRAL_WINDOW_ID |
| 02-Oct-2026 15:54:28 | Column SPECTRAL_WINDOW_ID PASSED |
| 02-Oct-2026 15:54:28 | |
| 02-Oct-2026 15:54:28 | Testing column ANTENNA1 |
| 02-Oct-2026 15:54:28 | Column ANTENNA1 PASSED |
| 02-Oct-2026 15:54:28 | |
| 02-Oct-2026 15:54:28 | Testing column ANTENNA2 |
| 02-Oct-2026 15:54:28 | Column ANTENNA2 PASSED |
| 02-Oct-2026 15:54:28 | |
| 02-Oct-2026 15:54:28 | Testing column INTERVAL |
| 02-Oct-2026 15:54:28 | Column INTERVAL PASSED |
| 02-Oct-2026 15:54:28 | |
| 02-Oct-2026 15:54:28 | Testing column SCAN_NUMBER |
| 02-Oct-2026 15:54:28 | Column SCAN_NUMBER PASSED |
| 02-Oct-2026 15:54:28 | |
| 02-Oct-2026 15:54:28 | Testing column OBSERVATION_ID |
| 02-Oct-2026 15:54:28 | Column OBSERVATION_ID PASSED |
| 02-Oct-2026 15:54:28 | |
| 02-Oct-2026 15:54:28 | Testing column FPARAM |
| 02-Oct-2026 15:54:28 | Column FPARAM PASSED |
| 02-Oct-2026 15:54:28 | |
| 02-Oct-2026 15:54:28 | Testing column PARAMERR |
| 02-Oct-2026 15:54:28 | Column PARAMERR PASSED |
| 02-Oct-2026 15:54:28 | |
| 02-Oct-2026 15:54:28 | Testing column FLAG |
| 02-Oct-2026 15:54:28 | Column FLAG PASSED |
| 02-Oct-2026 15:54:28 | PASSED |
| 02-Oct-2026 15:54:28 | |
| 02-Oct-2026 15:54:29 | test_task_fringefit.py::Fringefit_tests::test_sbd |
| 02-Oct-2026 15:54:29 | Just the basics |
| 02-Oct-2026 15:54:29 | |
| 02-Oct-2026 15:54:29 | Testing column TIME |
| 02-Oct-2026 15:54:29 | Column TIME PASSED |
| 02-Oct-2026 15:54:29 | |
| 02-Oct-2026 15:54:29 | Testing column FIELD_ID |
| 02-Oct-2026 15:54:29 | Column FIELD_ID PASSED |
| 02-Oct-2026 15:54:29 | |
| 02-Oct-2026 15:54:29 | Testing column SPECTRAL_WINDOW_ID |
| 02-Oct-2026 15:54:29 | Column SPECTRAL_WINDOW_ID PASSED |
| 02-Oct-2026 15:54:29 | |
| 02-Oct-2026 15:54:29 | Testing column ANTENNA1 |
| 02-Oct-2026 15:54:29 | Column ANTENNA1 PASSED |
| 02-Oct-2026 15:54:29 | |
| 02-Oct-2026 15:54:29 | Testing column ANTENNA2 |
| 02-Oct-2026 15:54:29 | Column ANTENNA2 PASSED |
| 02-Oct-2026 15:54:29 | |
| 02-Oct-2026 15:54:29 | Testing column INTERVAL |
| 02-Oct-2026 15:54:29 | Column INTERVAL PASSED |
| 02-Oct-2026 15:54:29 | |
| 02-Oct-2026 15:54:29 | Testing column SCAN_NUMBER |
| 02-Oct-2026 15:54:29 | Column SCAN_NUMBER PASSED |
| 02-Oct-2026 15:54:29 | |
| 02-Oct-2026 15:54:29 | Testing column OBSERVATION_ID |
| 02-Oct-2026 15:54:29 | Column OBSERVATION_ID PASSED |
| 02-Oct-2026 15:54:29 | |
| 02-Oct-2026 15:54:29 | Testing column FPARAM |
| 02-Oct-2026 15:54:29 | Column FPARAM PASSED |
| 02-Oct-2026 15:54:29 | |
| 02-Oct-2026 15:54:29 | Testing column PARAMERR |
| 02-Oct-2026 15:54:29 | Column PARAMERR PASSED |
| 02-Oct-2026 15:54:29 | |
| 02-Oct-2026 15:54:29 | Testing column FLAG |
| 02-Oct-2026 15:54:29 | Column FLAG PASSED |
| 02-Oct-2026 15:54:29 | PASSED |
| 02-Oct-2026 15:54:29 | |
| 02-Oct-2026 15:54:32 | test_task_fringefit.py::Fringefit_tests::test_uvrange |
| 02-Oct-2026 15:54:32 | Check that the uvrnage parameter excludes antennas |
| 02-Oct-2026 15:54:32 | Just the basics |
| 02-Oct-2026 15:54:32 | PASSED |
| 02-Oct-2026 15:54:32 | |
| 02-Oct-2026 15:54:36 | test_task_fringefit.py::Fringefit_single_tests::test_param |
| 02-Oct-2026 15:54:36 | PASSED |
| 02-Oct-2026 15:54:36 | |
| 02-Oct-2026 15:54:36 | test_task_fringefit.py::Fringefit_single_tests::test_single |
| 02-Oct-2026 15:54:36 | PASSED |
| 02-Oct-2026 15:54:36 | |
| 02-Oct-2026 15:54:38 | test_task_fringefit.py::Fringefit_dispersive_tests::test_manual_phase_cal |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column TIME |
| 02-Oct-2026 15:54:38 | Column TIME PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column FIELD_ID |
| 02-Oct-2026 15:54:38 | Column FIELD_ID PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column SPECTRAL_WINDOW_ID |
| 02-Oct-2026 15:54:38 | Column SPECTRAL_WINDOW_ID PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column ANTENNA1 |
| 02-Oct-2026 15:54:38 | Column ANTENNA1 PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column ANTENNA2 |
| 02-Oct-2026 15:54:38 | Column ANTENNA2 PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column INTERVAL |
| 02-Oct-2026 15:54:38 | Column INTERVAL PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column SCAN_NUMBER |
| 02-Oct-2026 15:54:38 | Column SCAN_NUMBER PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column OBSERVATION_ID |
| 02-Oct-2026 15:54:38 | Column OBSERVATION_ID PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column FPARAM |
| 02-Oct-2026 15:54:38 | Column FPARAM PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column PARAMERR |
| 02-Oct-2026 15:54:38 | Column PARAMERR PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column FLAG |
| 02-Oct-2026 15:54:38 | Column FLAG PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column TIME |
| 02-Oct-2026 15:54:38 | Column TIME PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column FIELD_ID |
| 02-Oct-2026 15:54:38 | Column FIELD_ID PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column SPECTRAL_WINDOW_ID |
| 02-Oct-2026 15:54:38 | Column SPECTRAL_WINDOW_ID PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column ANTENNA1 |
| 02-Oct-2026 15:54:38 | Column ANTENNA1 PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column ANTENNA2 |
| 02-Oct-2026 15:54:38 | Column ANTENNA2 PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column INTERVAL |
| 02-Oct-2026 15:54:38 | Column INTERVAL PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column SCAN_NUMBER |
| 02-Oct-2026 15:54:38 | Column SCAN_NUMBER PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column OBSERVATION_ID |
| 02-Oct-2026 15:54:38 | Column OBSERVATION_ID PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column FPARAM |
| 02-Oct-2026 15:54:38 | Column FPARAM PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column PARAMERR |
| 02-Oct-2026 15:54:38 | Column PARAMERR PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:38 | Testing column FLAG |
| 02-Oct-2026 15:54:38 | Column FLAG PASSED |
| 02-Oct-2026 15:54:38 | PASSED |
| 02-Oct-2026 15:54:38 | |
| 02-Oct-2026 15:54:39 | test_task_fringefit.py::Fringefit_refant_bookkeeping_tests::test_bookkeeping |
| 02-Oct-2026 15:54:39 | PASSED |
| 02-Oct-2026 15:54:39 | |
| 02-Oct-2026 15:54:40 | 2026-10-02 19:54:40 WARN MSSpw Expression parser::MSSpwIndex::convertToChannelIndex (file ../../ms/MSSel/MSSpwIndex.cc, line 398) Channel 32 out of range for SPW 0 (valid range 0~31). Limiting it to be within the available range. |
| 02-Oct-2026 15:54:40 | 2026-10-02 19:54:40 WARN MSSpw Expression parser::MSSpwIndex::convertToChannelIndex (file ../../ms/MSSel/MSSpwIndex.cc, line 398) Channel 32 out of range for SPW 0 (valid range 0~31). Limiting it to be within the available range. |
| 02-Oct-2026 15:54:40 | 2026-10-02 19:54:40 WARN MSSpw Expression parser::MSSpwIndex::convertToChannelIndex (file ../../ms/MSSel/MSSpwIndex.cc, line 398) Channel 32 out of range for SPW 0 (valid range 0~31). Limiting it to be within the available range. |
| 02-Oct-2026 15:54:40 | 2026-10-02 19:54:40 SEVERE Calibrater::solve Caught exception: Mismatch with frequency meta-data in append to n08c1.mbdcal detected in spw=0. Check spw selection. |
| 02-Oct-2026 15:54:40 | 2026-10-02 19:54:40 SEVERE Exception Reported: Error in Calibrater::solve. |
| 02-Oct-2026 15:54:40 | 2026-10-02 19:54:40 SEVERE fringefit::::casa Task fringefit raised an exception of class RuntimeError with the following message: Error in Calibrater::solve. |
| 02-Oct-2026 15:54:40 | test_task_fringefit.py::FreqMetaTests::test_metadata |
| 02-Oct-2026 15:54:40 | Error in Calibrater::solve. |
| 02-Oct-2026 15:54:40 | PASSED |
| 02-Oct-2026 15:54:40 | |
| 02-Oct-2026 15:55:25 | test_task_fringefit.py::Fringefit_corrcomb::test_comb |
| 02-Oct-2026 15:55:25 | PASSED |
| 02-Oct-2026 15:55:25 | |
| 02-Oct-2026 15:56:44 | test_task_fringefit.py::Fringefit_corrcomb2::test_corrcomb2 |
| 02-Oct-2026 15:56:44 | PASSED |
| 02-Oct-2026 15:56:44 | |
| 02-Oct-2026 15:56:49 | test_task_fringefit.py::Fringefit_paramactive_caltable::test_paramactive_callib |
| 02-Oct-2026 15:56:49 | Test that the default state for paramactive with callib matches [T,T,F] |
| 02-Oct-2026 15:56:49 | PASSED |
| 02-Oct-2026 15:56:49 | |
| 02-Oct-2026 15:56:51 | test_task_fringefit.py::Fringefit_paramactive_caltable::test_single_chan |
| 02-Oct-2026 15:56:51 | PASSED |
| 02-Oct-2026 15:56:51 | |
| 02-Oct-2026 15:56:51 | test_task_fringefit.py::Fringefit_spw_surgery::test_spw |
| 02-Oct-2026 15:56:51 | PASSED |
| 02-Oct-2026 15:56:51 | |
| 02-Oct-2026 15:57:19 | test_task_fringefit.py::Fringefit_ignore_stations::test_spw |
| 02-Oct-2026 15:57:19 | PASSED |
| 02-Oct-2026 15:57:19 | |
| 02-Oct-2026 15:57:19 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_fringefit/nose.xml - |
| 02-Oct-2026 15:57:19 | ================== 14 passed, 1 warning in 176.20s (0:02:56) =================== |
| 02-Oct-2026 15:57:19 | ============================= test session starts ============================== |
| 02-Oct-2026 15:57:19 | platform darwin -- Python 3.12.8, pytest-9.1.1, pluggy-1.6.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6testenv/bin/python3.12 |
| 02-Oct-2026 15:57:19 | cachedir: .pytest_cache |
| 02-Oct-2026 15:57:19 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvcontsub_old |
| 02-Oct-2026 15:57:19 | configfile: pytest.ini |
| 02-Oct-2026 15:57:23 | collecting ... collected 6 items |
| 02-Oct-2026 15:57:23 | |
| 02-Oct-2026 15:57:23 | |
| 02-Oct-2026 15:57:23 | 2026-10-02 19:57:23 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release. |
| 02-Oct-2026 15:57:23 | 2026-10-02 19:57:23 SEVERE MeasTable::dUTC(Double) (file ../../measures/Measures/MeasTable.cc, line 4290) Leap second table TAI_UTC seems out-of-date. |
| 02-Oct-2026 15:57:23 | 2026-10-02 19:57:23 SEVERE MeasTable::dUTC(Double) (file ../../measures/Measures/MeasTable.cc, line 4290)+ Until the table is updated (see the CASA documentation or your system admin), |
| 02-Oct-2026 15:57:23 | 2026-10-02 19:57:23 SEVERE MeasTable::dUTC(Double) (file ../../measures/Measures/MeasTable.cc, line 4290)+ times and coordinates derived from UTC could be wrong by 1s or more. |
| 02-Oct-2026 15:57:23 | 2026-10-02 19:57:23 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:57:23 | test_task_uvcontsub_old.py::zeroth::test_zeroth |
| 02-Oct-2026 15:57:23 | |
| 02-Oct-2026 15:57:23 | Running uvcontsub_old |
| 02-Oct-2026 15:57:23 | Continuum estimate in line-free region |
| 02-Oct-2026 15:57:23 | Continuum estimate in line region |
| 02-Oct-2026 15:57:23 | Continuum-subtracted data in line-free region |
| 02-Oct-2026 15:57:23 | Continuum-subtracted data in line region |
| 02-Oct-2026 15:57:23 | Non-empty pointing table (for MMS case) |
| 02-Oct-2026 15:57:23 | PASSED |
| 02-Oct-2026 15:57:23 | |
| 02-Oct-2026 15:57:23 | 2026-10-02 19:57:24 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release. |
| 02-Oct-2026 15:57:23 | 2026-10-02 19:57:24 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator. |
| 02-Oct-2026 15:57:23 | test_task_uvcontsub_old.py::fourth::test_fourth |
| 02-Oct-2026 15:57:23 | |
| 02-Oct-2026 15:57:23 | Running uvcontsub_old |
| 02-Oct-2026 15:57:23 | Continuum estimate |
| 02-Oct-2026 15:57:23 | Continuum-subtracted data |
| 02-Oct-2026 15:57:23 | PASSED |
| 02-Oct-2026 15:57:23 | |
| 02-Oct-2026 15:57:23 | 2026-10-02 19:57:24 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release. |
| 02-Oct-2026 15:57:24 | 2026-10-02 19:57:24 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator. |
| 02-Oct-2026 15:57:24 | 2026-10-02 19:57:24 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release. |
| 02-Oct-2026 15:57:24 | 2026-10-02 19:57:25 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator. |
| 02-Oct-2026 15:57:24 | test_task_uvcontsub_old.py::combspw::test_combspw |
| 02-Oct-2026 15:57:24 | |
| 02-Oct-2026 15:57:24 | Running uvcontsub_old |
| 02-Oct-2026 15:57:24 | |
| 02-Oct-2026 15:57:24 | Running uvcontsub_old |
| 02-Oct-2026 15:57:24 | combspw fitorder=0 line estimate |
| 02-Oct-2026 15:57:24 | combspw fitorder=1 line estimate |
| 02-Oct-2026 15:57:24 | PASSED |
| 02-Oct-2026 15:57:24 | |
| 02-Oct-2026 15:57:25 | 2026-10-02 19:57:25 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release. |
| 02-Oct-2026 15:57:25 | 2026-10-02 19:57:25 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator. |
| 02-Oct-2026 15:57:25 | test_task_uvcontsub_old.py::excludechans::test_excludechans |
| 02-Oct-2026 15:57:25 | |
| 02-Oct-2026 15:57:25 | Running uvcontsub_old |
| 02-Oct-2026 15:57:25 | Continuum estimate in line-free region |
| 02-Oct-2026 15:57:25 | Continuum estimate in line region |
| 02-Oct-2026 15:57:25 | Continuum-subtracted data in line-free region |
| 02-Oct-2026 15:57:25 | Continuum-subtracted data in line region |
| 02-Oct-2026 15:57:25 | Non-empty pointing table (for MMS case) |
| 02-Oct-2026 15:57:25 | PASSED |
| 02-Oct-2026 15:57:25 | |
| 02-Oct-2026 15:57:25 | 2026-10-02 19:57:25 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release. |
| 02-Oct-2026 15:57:25 | 2026-10-02 19:57:26 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator. |
| 02-Oct-2026 15:57:25 | test_task_uvcontsub_old.py::excludechans2::test_excludechans2 |
| 02-Oct-2026 15:57:25 | |
| 02-Oct-2026 15:57:25 | Running uvcontsub_old |
| 02-Oct-2026 15:57:25 | PASSED |
| 02-Oct-2026 15:57:25 | |
| 02-Oct-2026 15:57:25 | 2026-10-02 19:57:26 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release. |
| 02-Oct-2026 15:57:25 | 2026-10-02 19:57:26 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator. |
| 02-Oct-2026 15:57:26 | test_task_uvcontsub_old.py::freqrangeselection::test_freqrangeselection |
| 02-Oct-2026 15:57:26 | |
| 02-Oct-2026 15:57:26 | Running uvcontsub_old |
| 02-Oct-2026 15:57:26 | Continuum estimate in line-free region |
| 02-Oct-2026 15:57:26 | Continuum estimate in line region |
| 02-Oct-2026 15:57:26 | Continuum-subtracted data in line-free region |
| 02-Oct-2026 15:57:26 | Continuum-subtracted data in line region |
| 02-Oct-2026 15:57:26 | Non-empty pointing table (for MMS case) |
| 02-Oct-2026 15:57:26 | PASSED |
| 02-Oct-2026 15:57:26 | |
| 02-Oct-2026 15:57:26 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_uvcontsub_old/nose.xml - |
| 02-Oct-2026 15:57:26 | ========================= 6 passed, 1 warning in 6.16s ========================= |
| 02-Oct-2026 15:57:26 | ============================= test session starts ============================== |
| 02-Oct-2026 15:57:26 | platform darwin -- Python 3.12.8, pytest-9.1.1, pluggy-1.6.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6testenv/bin/python3.12 |
| 02-Oct-2026 15:57:26 | cachedir: .pytest_cache |
| 02-Oct-2026 15:57:26 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_clearcal |
| 02-Oct-2026 15:57:26 | configfile: pytest.ini |
| 02-Oct-2026 15:57:29 | collecting ... collected 8 items |
| 02-Oct-2026 15:57:29 | |
| 02-Oct-2026 15:57:29 | |
| 02-Oct-2026 15:57:29 | 2026-10-02 19:57:30 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:57:29 | test_task_clearcal.py::clearcal_test::test_addcorr |
| 02-Oct-2026 15:57:29 | test add corr: Check that a CORRECTED_DATA column is added if none existed before |
| 02-Oct-2026 15:57:29 | PASSED |
| 02-Oct-2026 15:57:29 | |
| 02-Oct-2026 15:57:30 | 2026-10-02 19:57:30 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:57:30 | test_task_clearcal.py::clearcal_test::test_addmodel |
| 02-Oct-2026 15:57:30 | test add model: Check that the addmodel parameter must be set to True for the MODEL_DATA column to be added |
| 02-Oct-2026 15:57:30 | PASSED |
| 02-Oct-2026 15:57:30 | |
| 02-Oct-2026 15:57:30 | 2026-10-02 19:57:30 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:57:30 | test_task_clearcal.py::clearcal_test::test_corrdata |
| 02-Oct-2026 15:57:30 | test Corr data: Check that the CORRECTED_DATA column is the same as the standard DATA column |
| 02-Oct-2026 15:57:30 | PASSED |
| 02-Oct-2026 15:57:30 | |
| 02-Oct-2026 15:57:30 | 2026-10-02 19:57:31 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:57:30 | 2026-10-02 19:57:31 WARN clearcal::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:57:30 | test_task_clearcal.py::clearcal_test::test_fieldselect |
| 02-Oct-2026 15:57:30 | test field select: Check that field select only changes a portion of the data |
| 02-Oct-2026 15:57:30 | PASSED |
| 02-Oct-2026 15:57:30 | |
| 02-Oct-2026 15:57:30 | 2026-10-02 19:57:31 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:57:31 | test_task_clearcal.py::clearcal_test::test_modeldata |
| 02-Oct-2026 15:57:31 | test modeldata: Checks that the DATA_MODEL column is set to unity in total intensity and zero in polarization |
| 02-Oct-2026 15:57:31 | PASSED |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | 2026-10-02 19:57:31 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:57:31 | 2026-10-02 19:57:31 WARN clearcal::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:57:31 | test_task_clearcal.py::clearcal_test::test_selectintent |
| 02-Oct-2026 15:57:31 | test select intent: Check that the intent param correcty preforms for only the provided intent |
| 02-Oct-2026 15:57:31 | PASSED |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | 2026-10-02 19:57:31 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:57:31 | 2026-10-02 19:57:31 WARN clearcal::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:57:31 | 2026-10-02 19:57:31 SEVERE clearcal::Calibrater::selectvis (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-BPMACOS15PY312/casa6/casatools/src/code/synthesis/MeasurementComponents/Calibrater.cc, line 4234) Caught exception: Spw Expression: No match found for 100, |
| 02-Oct-2026 15:57:31 | 2026-10-02 19:57:31 SEVERE clearcal:::: Exception Reported: Error in data selection specification: Spw Expression: No match found for 100, |
| 02-Oct-2026 15:57:31 | 2026-10-02 19:57:31 SEVERE clearcal::::casa Task clearcal raised an exception of class RuntimeError with the following message: Error in data selection specification: Spw Expression: No match found for 100, |
| 02-Oct-2026 15:57:31 | 2026-10-02 19:57:31 WARN clearcal::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:57:31 | test_task_clearcal.py::clearcal_test::test_spwselect |
| 02-Oct-2026 15:57:31 | test spw select: Check that spw select only changes correct spw |
| 02-Oct-2026 15:57:31 | PASSED |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | 2026-10-02 19:57:32 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 02-Oct-2026 15:57:31 | 2026-10-02 19:57:32 SEVERE clearcal::ms::open Exception Reported: Table file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_clearcal/fake.ms/table.dat does not exist |
| 02-Oct-2026 15:57:31 | 2026-10-02 19:57:32 SEVERE clearcal::::casa Task clearcal raised an exception of class RuntimeError with the following message: Table file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_clearcal/fake.ms/table.dat does not exist |
| 02-Oct-2026 15:57:31 | test_task_clearcal.py::clearcal_test::test_takesMS |
| 02-Oct-2026 15:57:31 | test takeMS: Checks that a MS is accepeted and invalid inputs are refused by clearcal |
| 02-Oct-2026 15:57:31 | False |
| 02-Oct-2026 15:57:31 | PASSED |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_clearcal/nose.xml - |
| 02-Oct-2026 15:57:31 | ========================= 8 passed, 1 warning in 5.44s ========================= |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_sdbaseline/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_sdbaseline |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_sdbaseline/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_sdbaseline/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_fixvis/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_fixvis |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_fixvis/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_fixvis/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_sdcal/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_sdcal |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_sdcal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_sdcal/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_mstransform_mms/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_mstransform_mms |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_mstransform_mms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_mstransform_mms/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_getjyperkalma/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_getjyperkalma |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_getjyperkalma/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_getjyperkalma/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_importasdm/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_importasdm |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_importasdm/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_importasdm/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_imregrid/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_imregrid |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_imregrid/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_imregrid/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_rmtables/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_rmtables |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_rmtables/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_rmtables/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_sdfixscan/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_sdfixscan |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_sdfixscan/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_sdfixscan/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_exportfits/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_exportfits |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_exportfits/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_exportfits/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_polfromgain/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_polfromgain |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_polfromgain/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_polfromgain/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_sdfit/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_sdfit |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_sdfit/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_sdfit/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_bandpass/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_bandpass |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_bandpass/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_bandpass/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_imval/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_imval |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_imval/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_imval/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_plotants/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_plotants |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_plotants/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_plotants/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_importmiriad/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_importmiriad |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_importmiriad/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_importmiriad/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_listvis/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_listvis |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_listvis/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_listvis/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_imagerhelpers_gclean/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_imagerhelpers_gclean |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_imagerhelpers_gclean/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_imagerhelpers_gclean/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_feather/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_feather |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_feather/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_feather/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_uvmodelfit/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvmodelfit/ |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_fringefit/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_fringefit |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_fringefit/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_fringefit/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_uvcontsub_old |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_uvcontsub_old/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_clearcal/ |
| 02-Oct-2026 15:57:31 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_clearcal |
| 02-Oct-2026 15:57:31 | |
| 02-Oct-2026 15:57:31 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/xml/test_task_clearcal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14/casa6/casatestutils/nosedir/test_task_clearcal/ |
| 02-Oct-2026 15:57:31 | Finished task 'Test wheel' with result: Success |
| 02-Oct-2026 15:57:31 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
| 02-Oct-2026 15:57:31 | Parsing test results under /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR223-TTA14... |
| 02-Oct-2026 15:57:32 | Finished task 'Parse tests' with result: Success |
| 02-Oct-2026 15:57:32 | Running post build plugin 'Docker Container Cleanup' |
| 02-Oct-2026 15:57:32 | Running post build plugin 'NCover Results Collector' |
| 02-Oct-2026 15:57:32 | Running post build plugin 'Build Results Label Collector' |
| 02-Oct-2026 15:57:32 | Running post build plugin 'Clover Results Collector' |
| 02-Oct-2026 15:57:32 | Running post build plugin 'npm Cache Cleanup' |
| 02-Oct-2026 15:57:32 | Running post build plugin 'Artifact Copier' |
| 02-Oct-2026 15:57:32 | Publishing an artifact: macOS 15 ARM py3.12 tasks wheel |
| 02-Oct-2026 15:57:32 | Finished publishing of artifact Non required job artifact Http Compression On : [macOS 15 ARM py3.12 tasks wheel], patterns: [casatasks*.whl] anchored at: [wheeldirectory/] in 166.3 ms |
| 02-Oct-2026 15:57:32 | Finalising the build... |
| 02-Oct-2026 15:57:32 | Stopping timer. |
| 02-Oct-2026 15:57:32 | Build CASASPECS-PR223-TTA14-2 completed. |
| 02-Oct-2026 15:57:32 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
| 02-Oct-2026 15:57:32 | Running on server: post build plugin 'NCover Results Collector' |
| 02-Oct-2026 15:57:32 | Running on server: post build plugin 'Build Labeller' |
| 02-Oct-2026 15:57:32 | Running on server: post build plugin 'Clover Delta Calculator' |
| 02-Oct-2026 15:57:32 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
| 02-Oct-2026 15:57:32 | All post build plugins have finished |
| 02-Oct-2026 15:57:32 | Generating build results summary... |
| 02-Oct-2026 15:57:33 | Saving build results to disk... |
| 02-Oct-2026 15:57:33 | Store variable context... |
| 02-Oct-2026 15:57:34 | Finished building CASASPECS-PR223-TTA14-2. |