Build: #1 was successful
Job: Test Tools macOS15 was successful
Build log
The build generated 53,280 lines of output. The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
| 17-Apr-2026 13:48:40 | 2026-04-17 17:48:41 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Apr-2026 13:48:40 | 2026-04-17 17:48:41 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Apr-2026 13:48:40 | 2026-04-17 17:48:41 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 17-Apr-2026 13:48:40 | 2026-04-17 17:48:41 INFO calibrater::reset Reseting solve/apply state |
| 17-Apr-2026 13:48:40 | 2026-04-17 17:48:41 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 17-Apr-2026 13:48:40 | 2026-04-17 17:48:41 INFO Calibrater::selectvis+ Selecting on time: '>04:38:23' |
| 17-Apr-2026 13:48:40 | 2026-04-17 17:48:41 INFO Calibrater::selectvis By selection 328860 rows are reduced to 313200 |
| 17-Apr-2026 13:48:40 | 2026-04-17 17:48:41 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 17-Apr-2026 13:48:40 | 2026-04-17 17:48:41 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 17-Apr-2026 13:48:40 | 2026-04-17 17:48:41 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Apr-2026 13:48:40 | 2026-04-17 17:48:41 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Apr-2026 13:48:40 | 2026-04-17 17:48:41 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Apr-2026 13:48:40 | 2026-04-17 17:48:41 INFO calibrater::correct Beginning correct--------------------------- |
| 17-Apr-2026 13:48:40 | 2026-04-17 17:48:41 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Apr-2026 13:48:40 | 2026-04-17 17:48:41 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Apr-2026 13:48:41 | 2026-04-17 17:48:42 INFO calibrater::correct Finished correcting. |
| 17-Apr-2026 13:48:41 | 2026-04-17 17:48:42 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Apr-2026 13:48:41 | test_tool_calibrater.py::calibrater_test::test_selectVisTime |
| 17-Apr-2026 13:48:41 | Check that time is properly selected by selectvis |
| 17-Apr-2026 13:48:41 | PASSED |
| 17-Apr-2026 13:48:41 | |
| 17-Apr-2026 13:48:41 | 2026-04-17 17:48:42 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Apr-2026 13:48:41 | 2026-04-17 17:48:42 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Apr-2026 13:48:41 | 2026-04-17 17:48:42 INFO Clearing all model records in MS header. |
| 17-Apr-2026 13:48:41 | 2026-04-17 17:48:42 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Apr-2026 13:48:42 | 2026-04-17 17:48:42 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Apr-2026 13:48:42 | 2026-04-17 17:48:42 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Apr-2026 13:48:42 | 2026-04-17 17:48:42 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Apr-2026 13:48:42 | 2026-04-17 17:48:42 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 17-Apr-2026 13:48:42 | 2026-04-17 17:48:42 INFO calibrater::reset Reseting solve/apply state |
| 17-Apr-2026 13:48:42 | 2026-04-17 17:48:42 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 17-Apr-2026 13:48:42 | 2026-04-17 17:48:42 INFO Calibrater::selectvis+ Selecting on uvrange: '> 500000lambda' |
| 17-Apr-2026 13:48:42 | 2026-04-17 17:48:43 INFO Calibrater::selectvis By selection 328860 rows are reduced to 103321 |
| 17-Apr-2026 13:48:42 | 2026-04-17 17:48:43 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 17-Apr-2026 13:48:42 | 2026-04-17 17:48:43 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 17-Apr-2026 13:48:42 | 2026-04-17 17:48:43 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Apr-2026 13:48:42 | 2026-04-17 17:48:43 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Apr-2026 13:48:42 | 2026-04-17 17:48:43 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Apr-2026 13:48:42 | 2026-04-17 17:48:43 INFO calibrater::correct Beginning correct--------------------------- |
| 17-Apr-2026 13:48:42 | 2026-04-17 17:48:43 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Apr-2026 13:48:42 | 2026-04-17 17:48:43 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Apr-2026 13:48:43 | 2026-04-17 17:48:43 INFO calibrater::correct Finished correcting. |
| 17-Apr-2026 13:48:43 | 2026-04-17 17:48:44 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Apr-2026 13:48:43 | test_tool_calibrater.py::calibrater_test::test_selectVisUVrange |
| 17-Apr-2026 13:48:43 | Check that selectvis properly selects for uvrange |
| 17-Apr-2026 13:48:43 | PASSED |
| 17-Apr-2026 13:48:43 | |
| 17-Apr-2026 13:48:43 | 2026-04-17 17:48:44 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Apr-2026 13:48:43 | 2026-04-17 17:48:44 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Apr-2026 13:48:43 | 2026-04-17 17:48:44 INFO Clearing all model records in MS header. |
| 17-Apr-2026 13:48:43 | 2026-04-17 17:48:44 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Apr-2026 13:48:44 | 2026-04-17 17:48:44 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Apr-2026 13:48:44 | 2026-04-17 17:48:44 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Apr-2026 13:48:44 | 2026-04-17 17:48:44 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Apr-2026 13:48:44 | 2026-04-17 17:48:44 INFO calibrater::parsecallibfile Beginning parsecallibfile-)------- |
| 17-Apr-2026 13:48:44 | 2026-04-17 17:48:44 INFO calibrater::setcallib Beginning setcallib--------- |
| 17-Apr-2026 13:48:44 | 2026-04-17 17:48:44 INFO Calibrater::setcallib2(callib) Arranging to APPLY: |
| 17-Apr-2026 13:48:44 | 2026-04-17 17:48:44 INFO . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 17-Apr-2026 13:48:44 | 2026-04-17 17:48:44 INFO . 0: |
| 17-Apr-2026 13:48:44 | 2026-04-17 17:48:44 INFO + MS: obs= scan= fld= intent= spw= |
| 17-Apr-2026 13:48:44 | 2026-04-17 17:48:44 INFO + CT: tinterp=linear finterp= |
| 17-Apr-2026 13:48:44 | 2026-04-17 17:48:44 INFO + obsmap=[] scanmap=[] fldmap=[] |
| 17-Apr-2026 13:48:44 | 2026-04-17 17:48:44 INFO + spwmap=[] antmap=[] |
| 17-Apr-2026 13:48:44 | 2026-04-17 17:48:44 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 17-Apr-2026 13:48:44 | 2026-04-17 17:48:44 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Apr-2026 13:48:44 | 2026-04-17 17:48:44 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 17-Apr-2026 13:48:45 | 2026-04-17 17:48:45 INFO calibrater::corrupt Finished corrupting. |
| 17-Apr-2026 13:48:45 | 2026-04-17 17:48:45 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Apr-2026 13:48:45 | test_tool_calibrater.py::calibrater_test::test_setCalLib |
| 17-Apr-2026 13:48:45 | Check that a provided cal table can be used to corrupt the MODEL_DATA |
| 17-Apr-2026 13:48:45 | PASSED |
| 17-Apr-2026 13:48:45 | |
| 17-Apr-2026 13:48:45 | 2026-04-17 17:48:45 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Apr-2026 13:48:45 | 2026-04-17 17:48:45 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Apr-2026 13:48:45 | 2026-04-17 17:48:45 INFO Clearing all model records in MS header. |
| 17-Apr-2026 13:48:45 | 2026-04-17 17:48:45 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Apr-2026 13:48:45 | 2026-04-17 17:48:46 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Apr-2026 13:48:45 | 2026-04-17 17:48:46 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Apr-2026 13:48:45 | 2026-04-17 17:48:46 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Apr-2026 13:48:45 | 2026-04-17 17:48:46 INFO Calibrater::setCorrDepFlags Setting correlation dependent flags = True |
| 17-Apr-2026 13:48:45 | 2026-04-17 17:48:46 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Apr-2026 13:48:46 | test_tool_calibrater.py::calibrater_test::test_setCorrDepFlags |
| 17-Apr-2026 13:48:46 | Check that corrdepflags will be checked |
| 17-Apr-2026 13:48:46 | PASSED |
| 17-Apr-2026 13:48:46 | |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO Clearing all model records in MS header. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO calibrater::smooth Beginning smooth--(MSSelection version)------- |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO Calibrater::smooth Beginning smoothing/interpolating method. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 WARN Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/ngc5921.gcal); attempting to update... |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO Calibrater::smooth Storing result in testcalout.cal |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO Writing solutions to table: testcalout.cal |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Apr-2026 13:48:46 | test_tool_calibrater.py::calibrater_test::test_smoothedCalTables |
| 17-Apr-2026 13:48:46 | Check that the smooth command creates a smoothed cal table |
| 17-Apr-2026 13:48:46 | PASSED |
| 17-Apr-2026 13:48:46 | |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO Clearing all model records in MS header. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO calibrater::setsolvebandpoly Beginning setsolvebandpoly--(MSSelection version)------- |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:46 INFO Calibrater::setsolvebandpoly Arranging to SOLVE: |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO Calibrater::setsolvebandpoly . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO calibrater::solve Beginning solve----------------------------- |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO Calibrater::solve . (None) |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO Calibrater::solve . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO Calibrater::solve Solving for BPOLY |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO For solint = inf, found 7 solution intervals. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.059507/0.0681762/0.0765806 |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.33653/0.750193/1.6779 |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0630839/0.0689061/0.0756384 |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.279482/0.74979/1.59355 |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0672607/0.089081/0.111106 |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.31075/3.32219/4.29305 |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0652822/0.0889198/0.116912 |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.44269/3.26616/4.3519 |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350681/0.587724/0.894558 |
| 17-Apr-2026 13:48:46 | 2026-04-17 17:48:47 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Apr-2026 13:48:47 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.296/59.0077/111.454 |
| 17-Apr-2026 13:48:47 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Apr-2026 13:48:47 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.354236/0.581733/0.988903 |
| 17-Apr-2026 13:48:47 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 17.2419/56.3249/117.264 |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0850169/0.113968/0.15276 |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.67561/5.33243/8.17296 |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0784237/0.114345/0.159908 |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.46392/5.27232/7.20673 |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0703936/0.102501/0.131676 |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:48 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.98728/4.47977/5.84264 |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0751114/0.102994/0.138529 |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.18629/4.47068/5.89411 |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350626/0.604424/0.974388 |
| 17-Apr-2026 13:48:48 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Apr-2026 13:48:49 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.2542/59.3511/120.719 |
| 17-Apr-2026 13:48:49 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Apr-2026 13:48:49 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.382806/0.598119/0.941571 |
| 17-Apr-2026 13:48:49 | 2026-04-17 17:48:49 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 20.0637/57.2112/118.101 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0750931/0.0978998/0.125897 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.72933/3.98787/5.33715 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0658572/0.0972125/0.140794 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.97943/3.97841/5.72903 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO Calibrater::solve Found good BPOLY solutions in 7 slots. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO calibrater::solve Finished solving. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 17-Apr-2026 13:48:50 | test_tool_calibrater.py::calibrater_test::test_solveBandpass |
| 17-Apr-2026 13:48:50 | Check that solve band poly creates the output table |
| 17-Apr-2026 13:48:50 | PASSED |
| 17-Apr-2026 13:48:50 | |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO Clearing all model records in MS header. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO calibrater::setsolvegainspline Beginning setsolvegainspline--(MSSelection version)------- |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO Calibrater::setsolvegainspline Arranging to SOLVE: |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO Calibrater::setsolvegainspline . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO calibrater::solve Beginning solve----------------------------- |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO Calibrater::solve . (None) |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO Calibrater::solve . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO GJonesSpline::solve() Fitting time-dependent cubic splines. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO GJonesSpline::solve() Solving for phase splines with splinetime= 10800 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO GJonesSpline::solve() Solving for amplitude splines with splinetime= 10800 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO GJonesSpline::solve() Accumulating data for: field= 1331+30500002_0, spw= 0, nchan= 63 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:50 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:51 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:51 INFO GJonesSpline::solve() Number of timestamps in data = 60 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:51 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:51 INFO GJonesSpline::solve() Number of cubic spline control points = 4 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:51 INFO GJonesSpline::solve() Number of cubic spline knots = 8 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:51 INFO GJonesSpline::solve() Number of cubic spline segments = 1 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:51 INFO GJonesSpline::solve() Fitting amplitude spline. |
| 17-Apr-2026 13:48:50 | test_tool_calibrater.py::calibrater_test::test_solveGainspline DPBTRF ;problem leading minor 23 |
| 17-Apr-2026 13:48:50 | DPBTRF ;problem leading minor 23 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:51 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:51 INFO GJonesSpline::solve() Fitting phase spline. |
| 17-Apr-2026 13:48:50 | DPBTRF ;problem leading minor 22 |
| 17-Apr-2026 13:48:50 | DPBTRF ;problem leading minor 22 |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:51 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:51 INFO calibrater::solve Finished solving. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:51 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 17-Apr-2026 13:48:50 | |
| 17-Apr-2026 13:48:50 | Check that solve gain spline creates the output table |
| 17-Apr-2026 13:48:50 | PASSED |
| 17-Apr-2026 13:48:50 | |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:51 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:51 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:51 INFO Clearing all model records in MS header. |
| 17-Apr-2026 13:48:50 | 2026-04-17 17:48:51 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Apr-2026 13:48:51 | 2026-04-17 17:48:51 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Apr-2026 13:48:51 | 2026-04-17 17:48:51 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Apr-2026 13:48:51 | 2026-04-17 17:48:51 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Apr-2026 13:48:51 | 2026-04-17 17:48:51 INFO calibrater::specifycal Beginning specifycal----------------------- |
| 17-Apr-2026 13:48:51 | 2026-04-17 17:48:51 INFO Creating G Jones table from specified parameters. |
| 17-Apr-2026 13:48:51 | 2026-04-17 17:48:51 INFO Generating 'G' corrections. |
| 17-Apr-2026 13:48:51 | 2026-04-17 17:48:51 INFO Specified parameter(s) (per spw and pol) repeated on all antennas. |
| 17-Apr-2026 13:48:51 | 2026-04-17 17:48:51 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations. |
| 17-Apr-2026 13:48:51 | 2026-04-17 17:48:51 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9]) |
| 17-Apr-2026 13:48:51 | 2026-04-17 17:48:51 INFO Writing solutions to table: testcalout.cal |
| 17-Apr-2026 13:48:51 | 2026-04-17 17:48:51 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Apr-2026 13:48:51 | test_tool_calibrater.py::calibrater_test::test_specifyCal |
| 17-Apr-2026 13:48:51 | Check that specifycal can set values for specific spws and antennas |
| 17-Apr-2026 13:48:51 | PASSED |
| 17-Apr-2026 13:48:51 | |
| 17-Apr-2026 13:48:51 | 2026-04-17 17:48:52 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 17-Apr-2026 13:48:51 | 2026-04-17 17:48:52 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 17-Apr-2026 13:48:51 | 2026-04-17 17:48:52 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Apr-2026 13:48:51 | 2026-04-17 17:48:52 INFO Clearing all model records in MS header. |
| 17-Apr-2026 13:48:51 | 2026-04-17 17:48:52 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO Calibrater::setsolve Arranging to SOLVE: |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO Calibrater::state The following calibration terms are arranged for apply: |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO Calibrater::state The following calibration term is arranged for solve: |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO calibrater::solve Beginning solve----------------------------- |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO Solving for Mf Mueller |
| 17-Apr-2026 13:48:52 | 2026-04-17 17:48:52 INFO For solint = inf, found 84 solution intervals. |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:53 INFO Found good Mf Mueller solutions in 84 intervals. |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:53 INFO Writing solutions to table: output.ms |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:53 INFO calibrater::solve Finished solving. |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:53 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 17-Apr-2026 13:48:53 | test_tool_calibrater.py::calibrater_test::test_standardPath |
| 17-Apr-2026 13:48:53 | open setapply setsolve state solve close |
| 17-Apr-2026 13:48:53 | PASSED |
| 17-Apr-2026 13:48:53 | |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:53 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:53 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:53 INFO Clearing all model records in MS header. |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:53 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO name:: No table opened. |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: The Table Cache has the following 16 entries: |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: 0: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: 1: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: 2: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: 3: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: 4: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: 5: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: 6: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: 7: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: 8: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: 9: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: 10: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: 11: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: 12: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: 13: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: 14: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: 15: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO name:: No table opened. |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO showcache:: The Table Cache is empty. |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Apr-2026 13:48:53 | test_tool_calibrater.py::calibrater_test::test_takesMs |
| 17-Apr-2026 13:48:53 | Check that the calibrater tool can open and close an MS |
| 17-Apr-2026 13:48:53 | PASSED |
| 17-Apr-2026 13:48:53 | |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Apr-2026 13:48:53 | 2026-04-17 17:48:54 INFO Clearing all model records in MS header. |
| 17-Apr-2026 13:48:54 | 2026-04-17 17:48:54 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Apr-2026 13:48:54 | 2026-04-17 17:48:55 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Apr-2026 13:48:54 | 2026-04-17 17:48:55 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Apr-2026 13:48:54 | 2026-04-17 17:48:55 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Apr-2026 13:48:54 | 2026-04-17 17:48:55 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Apr-2026 13:48:54 | 2026-04-17 17:48:55 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Apr-2026 13:48:54 | 2026-04-17 17:48:55 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Apr-2026 13:48:54 | 2026-04-17 17:48:55 INFO calibrater::correct Beginning correct--------------------------- |
| 17-Apr-2026 13:48:54 | 2026-04-17 17:48:55 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Apr-2026 13:48:54 | 2026-04-17 17:48:55 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Apr-2026 13:48:55 | 2026-04-17 17:48:56 INFO calibrater::correct Finished correcting. |
| 17-Apr-2026 13:48:55 | 2026-04-17 17:48:56 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Apr-2026 13:48:55 | test_tool_calibrater.py::calibrater_test::test_writeToCorrected |
| 17-Apr-2026 13:48:55 | Check that the tool writes to the CORRECTED_DATA column |
| 17-Apr-2026 13:48:55 | PASSED |
| 17-Apr-2026 13:48:55 | |
| 17-Apr-2026 13:48:55 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml - |
| 17-Apr-2026 13:48:55 | ======================== 24 passed, 1 warning in 37.69s ======================== |
| 17-Apr-2026 13:48:55 | ============================= test session starts ============================== |
| 17-Apr-2026 13:48:55 | platform darwin -- Python 3.12.8, pytest-9.0.3, pluggy-1.6.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6testenv/bin/python3.12 |
| 17-Apr-2026 13:48:55 | cachedir: .pytest_cache |
| 17-Apr-2026 13:48:55 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_linearmosaic |
| 17-Apr-2026 13:48:55 | configfile: pytest.ini |
| 17-Apr-2026 13:48:58 | collecting ... collected 5 items |
| 17-Apr-2026 13:48:58 | |
| 17-Apr-2026 13:48:58 | |
| 17-Apr-2026 13:48:58 | 2026-04-17 17:48:58 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 17-Apr-2026 13:48:58 | 2026-04-17 17:48:59 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 17-Apr-2026 13:48:59 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_noise |
| 17-Apr-2026 13:48:59 | test_flat_noise (flat noise type with flat noise input) |
| 17-Apr-2026 13:48:59 | PASSED |
| 17-Apr-2026 13:48:59 | |
| 17-Apr-2026 13:48:59 | 2026-04-17 17:48:59 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 17-Apr-2026 13:48:59 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_noise_existing_image |
| 17-Apr-2026 13:48:59 | test_flat_noise_existing image (flat noise type onto an existing image) |
| 17-Apr-2026 13:48:59 | PASSED |
| 17-Apr-2026 13:48:59 | |
| 17-Apr-2026 13:49:00 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_noise_flat_sky_input |
| 17-Apr-2026 13:49:00 | test_flat_noise_flat_sky_input (flat noise type with flat sky input) |
| 17-Apr-2026 13:49:00 | PASSED |
| 17-Apr-2026 13:49:00 | |
| 17-Apr-2026 13:49:01 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_sky |
| 17-Apr-2026 13:49:01 | test_flat_sky (flat sky type with flat noise input |
| 17-Apr-2026 13:49:01 | PASSED |
| 17-Apr-2026 13:49:01 | |
| 17-Apr-2026 13:49:02 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_sky_flat_sky_input |
| 17-Apr-2026 13:49:02 | test_flat_sky_flat_sky_input (flat sky type with flat sky inputs) |
| 17-Apr-2026 13:49:02 | PASSED |
| 17-Apr-2026 13:49:02 | |
| 17-Apr-2026 13:49:02 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_linearmosaic/nose.xml - |
| 17-Apr-2026 13:49:02 | ========================= 5 passed, 1 warning in 6.63s ========================= |
| 17-Apr-2026 13:49:02 | ============================= test session starts ============================== |
| 17-Apr-2026 13:49:02 | platform darwin -- Python 3.12.8, pytest-9.0.3, pluggy-1.6.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6testenv/bin/python3.12 |
| 17-Apr-2026 13:49:02 | cachedir: .pytest_cache |
| 17-Apr-2026 13:49:02 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_imagepol |
| 17-Apr-2026 13:49:02 | configfile: pytest.ini |
| 17-Apr-2026 13:49:04 | collecting ... collected 17 items |
| 17-Apr-2026 13:49:04 | |
| 17-Apr-2026 13:49:04 | |
| 17-Apr-2026 13:49:04 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:04 | 2026-04-17 17:49:05 INFO imagepol::complexFractionalLinearPolarization(...) Creating image 'g' of shape [10, 10, 10, 1] |
| 17-Apr-2026 13:49:04 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:04 | 2026-04-17 17:49:05 INFO imagepol::complexFractionalLinearPolarization(...) Creating image 'hh' of shape [10, 10, 10, 1] |
| 17-Apr-2026 13:49:04 | 2026-04-17 17:49:05 SEVERE imagepol::complexfraclinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 17-Apr-2026 13:49:04 | 2026-04-17 17:49:05 SEVERE imagepol::complexfraclinpol+ ... thrown by Bool casa::ImagePolarimetry::_checkBeams(const vector<StokesTypes> &, Bool, Bool) const at File: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1631 |
| 17-Apr-2026 13:49:04 | test_tool_imagepol.py::po_complexfraclinpol_test::test_multibeam |
| 17-Apr-2026 13:49:04 | Test multibeam images for correct behavior |
| 17-Apr-2026 13:49:04 | pol_eq_beams.fits |
| 17-Apr-2026 13:49:04 | PASSED |
| 17-Apr-2026 13:49:04 | |
| 17-Apr-2026 13:49:04 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:04 | 2026-04-17 17:49:05 INFO ImagePolProxy::complexlinpol Creating image 'g' of shape [10, 10, 10, 1] |
| 17-Apr-2026 13:49:04 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:04 | 2026-04-17 17:49:05 INFO ImagePolProxy::complexlinpol Creating image 'hh' of shape [10, 10, 10, 1] |
| 17-Apr-2026 13:49:04 | 2026-04-17 17:49:05 SEVERE imagepol::complexlinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 17-Apr-2026 13:49:04 | 2026-04-17 17:49:05 SEVERE imagepol::complexlinpol+ ... thrown by Bool casa::ImagePolarimetry::_checkBeams(const vector<StokesTypes> &, Bool, Bool) const at File: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1631 |
| 17-Apr-2026 13:49:04 | 2026-04-17 17:49:05 INFO name:: No table opened. |
| 17-Apr-2026 13:49:04 | 2026-04-17 17:49:05 INFO showcache:: The Table Cache is empty. |
| 17-Apr-2026 13:49:04 | test_tool_imagepol.py::po_complexlinpol_test::test_multibeam |
| 17-Apr-2026 13:49:04 | Test multibeam images for correct behavior |
| 17-Apr-2026 13:49:04 | PASSED |
| 17-Apr-2026 13:49:04 | |
| 17-Apr-2026 13:49:04 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::depolratio Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::depolratio+ ... thrown by Bool casa::ImagePolarimetry::_checkBeams(const vector<StokesTypes> &, Bool, Bool) const at File: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1631 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::depolratio Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::depolratio+ ... thrown by Bool casa::ImagePolarimetry::_checkBeams(const vector<StokesTypes> &, Bool, Bool) const at File: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1631 |
| 17-Apr-2026 13:49:05 | test_tool_imagepol.py::po_depolratio_test::test_multibeam |
| 17-Apr-2026 13:49:05 | Test multibeam images for correct behavior |
| 17-Apr-2026 13:49:05 | pol_eq_beams.fits |
| 17-Apr-2026 13:49:05 | PASSED |
| 17-Apr-2026 13:49:05 | |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::fourierRotationMeasure (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::fourierrotationmeasure Exception Reported: 2026-04-17 17:49:05 SEVERE imagepol::fourierRotationMeasure (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::fourierRotationMeasure (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::fourierrotationmeasure Exception Reported: 2026-04-17 17:49:05 SEVERE imagepol::fourierRotationMeasure (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
| 17-Apr-2026 13:49:05 | test_tool_imagepol.py::po_fourierrotationmeasure_test::test_multibeam |
| 17-Apr-2026 13:49:05 | Test multibeam images for correct behavior |
| 17-Apr-2026 13:49:05 | pol_eq_beams.fits |
| 17-Apr-2026 13:49:05 | PASSED |
| 17-Apr-2026 13:49:05 | |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePolarimetry::fracLinPol Debiasing with sigma = 1.0119 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | test_tool_imagepol.py::po_fraclinpol_test::test_multibeam |
| 17-Apr-2026 13:49:05 | Test multibeam images for correct behavior |
| 17-Apr-2026 13:49:05 | pol_eq_beams.fits |
| 17-Apr-2026 13:49:05 | PASSED |
| 17-Apr-2026 13:49:05 | |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePolarimetry::fracTotPol Debiasing with sigma = 1.0119 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | test_tool_imagepol.py::po_fractotpol_test::test_multibeam |
| 17-Apr-2026 13:49:05 | Test multibeam images for correct behavior |
| 17-Apr-2026 13:49:05 | pol_eq_beams.fits |
| 17-Apr-2026 13:49:05 | PASSED |
| 17-Apr-2026 13:49:05 | |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePolTask::_sigma Determined noise from V image to be 1.0119 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePolTask::_sigma Debiasing with sigma = 1.0119 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | test_tool_imagepol.py::po_linpolint_test::test_multibeam |
| 17-Apr-2026 13:49:05 | Test multibeam images for correct behavior |
| 17-Apr-2026 13:49:05 | pol_eq_beams.fits |
| 17-Apr-2026 13:49:05 | PASSED |
| 17-Apr-2026 13:49:05 | |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 WARN LinearPolarizationAngleCalculator::compute (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/LinearPolarizationAngleCalculator.cc, line 40) The input image has multiple beams. Because these beams can vary with stokes/polarization, they will not be copied to the output image |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO SubImageFactory::createImage Creating image 'g' of shape [10, 10, 10, 1] |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::linpolposang Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::linpolposang+ ... thrown by Bool casa::ImagePolTask::_checkBeams(const std::vector<StokesTypes> &, Bool, Bool) const at File: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolTask.cc, line: 84 |
| 17-Apr-2026 13:49:05 | test_tool_imagepol.py::po_linpolposang_test::test_multibeam |
| 17-Apr-2026 13:49:05 | Test multibeam images for correct behavior |
| 17-Apr-2026 13:49:05 | pol_eq_beams.fits |
| 17-Apr-2026 13:49:05 | PASSED |
| 17-Apr-2026 13:49:05 | |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFactory::createImage Created Paged image 'rm_input.im' of shape [20, 20, 4, 20] with float valued pixels. |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePol::rotationMeasure Creating image 'rm.im' of shape [20, 20] |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePol::rotationMeasure Creating image 'pa0.im' of shape [20, 20, 1] |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO image::statistics Determining stats for image rm.im |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageRegion::fromRecord Selected bounding box : |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageRegion::fromRecord+ [0, 0] to [19, 19] (00:00:40.000, -00.10.00.001 to 23:59:24.000, +00.09.00.001) |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::_logStartup Statistics calculated using Classic algorithm |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::_logStartup Regions --- |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (pixel) [blc]: [0, 0] |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::_logStartup -- top-right corner (pixel) [trc]: [19, 19] |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (world) [blcf]: 00:00:40.000, -00.10.00.001 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::_logStartup -- top-right corner (world) [trcf]: 23:59:24.000, +00.09.00.001 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO Values --- |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- number of points [npts]: 400 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- maximum value [max]: 9.60001 rad/m/m |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- minimum value [min]: 9.60001 rad/m/m |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- position of max value (pixel) [maxpos]: [1, 0] |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- position of min value (pixel) [minpos]: [0, 0] |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- position of max value (world) [maxposf]: 00:00:36.000, -00.10.00.001 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- position of min value (world) [minposf]: 00:00:40.000, -00.10.00.001 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- Sum of pixel values [sum]: 3840 rad/m/m |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- Sum of squared pixel values [sumsq]: 36864.1 rad/m/m.rad/m/m |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO Statistics --- |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- Mean of the pixel values [mean]: 9.60001 rad/m/m |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- Variance of the pixel values : 9.11774e-13 rad/m/m |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- Standard deviation of the Mean [sigma]: 9.54869e-07 rad/m/m |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- Root mean square [rms]: 9.60001 rad/m/m |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::statistics Sum column unit = rad/m/m |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::statistics+ Mean column unit = rad/m/m |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::statistics+ Std_dev column unit = rad/m/m |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::statistics+ Minimum column unit = rad/m/m |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::statistics+ Maximum column unit = rad/m/m |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::statistics Npts Sum Mean Rms Std_dev Minimum Maximum |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::statistics 4.000000e+02 3.840004e+03 9.600010e+00 9.600010e+00 9.548686e-07 9.600009e+00 9.600011e+00 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO deleted table /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_imagepol/rm.im |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO image::statistics Determining stats for image pa0.im |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO CasacRegionManager::fromBCS Using polarizations ALL |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageRegion::fromRecord Selected bounding box : |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageRegion::fromRecord+ [0, 0, 0] to [19, 19, 0] (00:00:40.000, -00.10.00.001, Pangle to 23:59:24.000, +00.09.00.001, Pangle) |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::_logStartup Statistics calculated using Classic algorithm |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::_logStartup Regions --- |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (pixel) [blc]: [0, 0, 0] |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::_logStartup -- top-right corner (pixel) [trc]: [19, 19, 0] |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (world) [blcf]: 00:00:40.000, -00.10.00.001, Pangle |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::_logStartup -- top-right corner (world) [trcf]: 23:59:24.000, +00.09.00.001, Pangle |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO Values --- |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- number of points [npts]: 400 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- maximum value [max]: 22.5 deg |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- minimum value [min]: 22.5 deg |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- position of max value (pixel) [maxpos]: [0, 0, 0] |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- position of min value (pixel) [minpos]: [1, 0, 0] |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- position of max value (world) [maxposf]: 00:00:40.000, -00.10.00.001, Pangle |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- position of min value (world) [minposf]: 00:00:36.000, -00.10.00.001, Pangle |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- Sum of pixel values [sum]: 8999.99 deg |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- Sum of squared pixel values [sumsq]: 202500 deg.deg |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO Statistics --- |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- Mean of the pixel values [mean]: 22.5 deg |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- Variance of the pixel values : 3.6471e-12 deg |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- Standard deviation of the Mean [sigma]: 1.90974e-06 deg |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO -- Root mean square [rms]: 22.5 deg |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::statistics Sum column unit = deg |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::statistics+ Mean column unit = deg |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::statistics+ Std_dev column unit = deg |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::statistics+ Minimum column unit = deg |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::statistics+ Maximum column unit = deg |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::statistics Npts Sum Mean Rms Std_dev Minimum Maximum |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageStatsCalculator::statistics 4.000000e+02 8.999989e+03 2.249997e+01 2.249997e+01 1.909737e-06 2.249997e+01 2.249998e+01 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO deleted table /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_imagepol/pa0.im |
| 17-Apr-2026 13:49:05 | test_tool_imagepol.py::po_rotationmeasure_test::test_algorithm |
| 17-Apr-2026 13:49:05 | Test rotation measure computation algorithm |
| 17-Apr-2026 13:49:05 | PASSED |
| 17-Apr-2026 13:49:05 | |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePol::rotationMeasure Creating image 'g' of shape [10, 10] |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePol::rotationMeasure Creating image 'hh' of shape [10, 10] |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::rotationmeasure Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::rotationmeasure+ ... thrown by Bool casa::ImagePolarimetry::_checkBeams(const vector<StokesTypes> &, Bool, Bool) const at File: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1631 |
| 17-Apr-2026 13:49:05 | test_tool_imagepol.py::po_rotationmeasure_test::test_multibeam |
| 17-Apr-2026 13:49:05 | Test multibeam images for correct behavior |
| 17-Apr-2026 13:49:05 | PASSED |
| 17-Apr-2026 13:49:05 | |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 17-Apr-2026 13:49:05 | test_tool_imagepol.py::po_sigma_test::test_multibeam |
| 17-Apr-2026 13:49:05 | Test multibeam images for correct behavior |
| 17-Apr-2026 13:49:05 | pol_eq_beams.fits |
| 17-Apr-2026 13:49:05 | PASSED |
| 17-Apr-2026 13:49:05 | |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::sigmadepolratio Exception Reported: Exception: Beams or beamsets are not equal between the two images, caonnot perform calculation. |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::sigmadepolratio+ ... thrown by static void casa::ImagePolarimetry::_checkBeams(const ImagePolarimetry &, const ImagePolarimetry &, const Vector<ImagePolarimetry::StokesTypes> &) at File: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1691 |
| 17-Apr-2026 13:49:05 | test_tool_imagepol.py::po_sigmadepolratio_test::test_multibeam |
| 17-Apr-2026 13:49:05 | Test multibeam images for correct behavior |
| 17-Apr-2026 13:49:05 | PASSED |
| 17-Apr-2026 13:49:05 | |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO imagepol::sigmaFracLinPol Creating image 'g' of shape [10, 10, 10, 1] |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::sigmafraclinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::sigmafraclinpol+ ... thrown by Bool casa::ImagePolarimetry::_checkBeams(const vector<StokesTypes> &, Bool, Bool) const at File: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1631 |
| 17-Apr-2026 13:49:05 | test_tool_imagepol.py::po_sigmafraclinpol_test::test_multibeam |
| 17-Apr-2026 13:49:05 | Test multibeam images for correct behavior |
| 17-Apr-2026 13:49:05 | PASSED |
| 17-Apr-2026 13:49:05 | |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO imagepol::sigmaFracTotPol Creating image 'g' of shape [10, 10, 10, 1] |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 WARN ImagePolarimetry::_setDoLinDoCirc (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line 272) I, Q, and U beams are not the same, cannot do linear portion |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 WARN ImagePolarimetry::_setDoLinDoCirc (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line 272) I and V beams are not the same, cannot do circular portion |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::sigmafractotpol Exception Reported: Exception: Can do neither linear nor circular portions. |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::sigmafractotpol+ ... thrown by void casa::ImagePolarimetry::_setDoLinDoCirc(Bool &, Bool &) const at File: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 294 |
| 17-Apr-2026 13:49:05 | test_tool_imagepol.py::po_sigmafractotpol_test::test_multibeam |
| 17-Apr-2026 13:49:05 | Test multibeam images for correct behavior |
| 17-Apr-2026 13:49:05 | PASSED |
| 17-Apr-2026 13:49:05 | |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::sigmalinpolint Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::sigmalinpolint+ ... thrown by Bool casa::ImagePolarimetry::_checkBeams(const vector<StokesTypes> &, Bool, Bool) const at File: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1631 |
| 17-Apr-2026 13:49:05 | test_tool_imagepol.py::po_sigmalinpolint_test::test_multibeam |
| 17-Apr-2026 13:49:05 | Test multibeam images for correct behavior |
| 17-Apr-2026 13:49:05 | PASSED |
| 17-Apr-2026 13:49:05 | |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO imagepol::sigmaLinPolPosAng Creating image 'g' of shape [10, 10, 10, 1] |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::sigmalinpolposang Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 SEVERE imagepol::sigmalinpolposang+ ... thrown by Bool casa::ImagePolarimetry::_checkBeams(const vector<StokesTypes> &, Bool, Bool) const at File: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-BPMACOS15PY312/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1631 |
| 17-Apr-2026 13:49:05 | test_tool_imagepol.py::po_sigmalinpolposang_test::test_multibeam |
| 17-Apr-2026 13:49:05 | Test multibeam images for correct behavior |
| 17-Apr-2026 13:49:05 | PASSED |
| 17-Apr-2026 13:49:05 | |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePolTask::_sigma Determined noise from V image to be 1.0119 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImagePolTask::_sigma Debiasing with sigma = 1.0119 |
| 17-Apr-2026 13:49:05 | 2026-04-17 17:49:05 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 17-Apr-2026 13:49:05 | test_tool_imagepol.py::po_totpolint_test::test_multibeam |
| 17-Apr-2026 13:49:05 | Test multibeam images for correct behavior |
| 17-Apr-2026 13:49:05 | PASSED |
| 17-Apr-2026 13:49:05 | |
| 17-Apr-2026 13:49:05 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml - |
| 17-Apr-2026 13:49:05 | ======================== 17 passed, 1 warning in 2.49s ========================= |
| 17-Apr-2026 13:49:05 | ============================= test session starts ============================== |
| 17-Apr-2026 13:49:05 | platform darwin -- Python 3.12.8, pytest-9.0.3, pluggy-1.6.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6testenv/bin/python3.12 |
| 17-Apr-2026 13:49:05 | cachedir: .pytest_cache |
| 17-Apr-2026 13:49:05 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_table |
| 17-Apr-2026 13:49:05 | configfile: pytest.ini |
| 17-Apr-2026 13:49:07 | collecting ... table tool tests will use /opt/casa/data/casatestdata/unittest/table/n08c1_swap1.ms |
| 17-Apr-2026 13:49:07 | collected 13 items |
| 17-Apr-2026 13:49:07 | |
| 17-Apr-2026 13:49:07 | |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | test_tool_table.py::TableGetcoliterTest::test_consistency |
| 17-Apr-2026 13:49:07 | PASSED |
| 17-Apr-2026 13:49:07 | |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | test_tool_table.py::TableGetcoliterTest::test_element_match |
| 17-Apr-2026 13:49:07 | Test element match using direct comparison and StopIteration assertion. |
| 17-Apr-2026 13:49:07 | [4.71188568e+09 4.71188569e+09 4.71188570e+09 4.71188571e+09 |
| 17-Apr-2026 13:49:07 | 4.71188571e+09 4.71188572e+09 4.71188573e+09 4.71188574e+09] |
| 17-Apr-2026 13:49:07 | [4.71188568e+09 4.71188569e+09 4.71188570e+09 4.71188571e+09 |
| 17-Apr-2026 13:49:07 | 4.71188571e+09 4.71188572e+09 4.71188573e+09 4.71188574e+09] |
| 17-Apr-2026 13:49:07 | PASSED |
| 17-Apr-2026 13:49:07 | |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | test_tool_table.py::TableGetcoliterTest::test_errors |
| 17-Apr-2026 13:49:07 | PASSED |
| 17-Apr-2026 13:49:07 | |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | test_tool_table.py::TableGetcoliterTest::test_values |
| 17-Apr-2026 13:49:07 | PASSED |
| 17-Apr-2026 13:49:07 | |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | test_tool_table.py::TableRowTest::test_all_rows |
| 17-Apr-2026 13:49:07 | PASSED |
| 17-Apr-2026 13:49:07 | |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | test_tool_table.py::TableRowTest::test_columnnames_exclude |
| 17-Apr-2026 13:49:07 | PASSED |
| 17-Apr-2026 13:49:07 | |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | test_tool_table.py::TableRowTest::test_columnnames_include |
| 17-Apr-2026 13:49:07 | PASSED |
| 17-Apr-2026 13:49:07 | |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | test_tool_table.py::TableRowTest::test_get |
| 17-Apr-2026 13:49:07 | Test get function |
| 17-Apr-2026 13:49:07 | PASSED |
| 17-Apr-2026 13:49:07 | |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | test_tool_table.py::TableRowTest::test_put |
| 17-Apr-2026 13:49:07 | Test put function |
| 17-Apr-2026 13:49:07 | PASSED |
| 17-Apr-2026 13:49:07 | |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | test_tool_table.py::TableRowTest::test_shape |
| 17-Apr-2026 13:49:07 | Test for valid data shape |
| 17-Apr-2026 13:49:07 | PASSED |
| 17-Apr-2026 13:49:07 | |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | test_tool_table.py::TableRowTest::test_some_rows |
| 17-Apr-2026 13:49:07 | PASSED |
| 17-Apr-2026 13:49:07 | |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO ImageFactory::createImage Created Paged image 'tmp.im' of shape [3, 4] with float valued pixels. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::bogus Exception Reported: Table column bogus is unknown |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map Exception Reported: TableColumn: row number 1 exceeds #rows 1 in table /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_table/tmp.im |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map Exception Reported: Exception: blc must have length of 2. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const vector<long> &, const String &, const IPosition &, const pair<vector<long>, vector<long>> *const &) at File: /private/var/folders/60/83wxljbx2vlfbx_hy0yfv8rc0000gn/T/build-via-sdist-aibou7sq/casatools-6.7.6.0+dirty/src/tools/table/table_cmpt.cc, line: 1389 |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map Exception Reported: Exception: All elements of blc must be greater than or equal to 0. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const vector<long> &, const String &, const IPosition &, const pair<vector<long>, vector<long>> *const &) at File: /private/var/folders/60/83wxljbx2vlfbx_hy0yfv8rc0000gn/T/build-via-sdist-aibou7sq/casatools-6.7.6.0+dirty/src/tools/table/table_cmpt.cc, line: 1393 |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map Exception Reported: Exception: Element 1 of blc must be less than 4. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const vector<long> &, const String &, const IPosition &, const pair<vector<long>, vector<long>> *const &) at File: /private/var/folders/60/83wxljbx2vlfbx_hy0yfv8rc0000gn/T/build-via-sdist-aibou7sq/casatools-6.7.6.0+dirty/src/tools/table/table_cmpt.cc, line: 1399 |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map Exception Reported: Exception: trc must have length of 2. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const vector<long> &, const String &, const IPosition &, const pair<vector<long>, vector<long>> *const &) at File: /private/var/folders/60/83wxljbx2vlfbx_hy0yfv8rc0000gn/T/build-via-sdist-aibou7sq/casatools-6.7.6.0+dirty/src/tools/table/table_cmpt.cc, line: 1389 |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map Exception Reported: Exception: All elements of trc must be greater than or equal to 0. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const vector<long> &, const String &, const IPosition &, const pair<vector<long>, vector<long>> *const &) at File: /private/var/folders/60/83wxljbx2vlfbx_hy0yfv8rc0000gn/T/build-via-sdist-aibou7sq/casatools-6.7.6.0+dirty/src/tools/table/table_cmpt.cc, line: 1393 |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map Exception Reported: Exception: Element 0 of trc must be less than 3. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const vector<long> &, const String &, const IPosition &, const pair<vector<long>, vector<long>> *const &) at File: /private/var/folders/60/83wxljbx2vlfbx_hy0yfv8rc0000gn/T/build-via-sdist-aibou7sq/casatools-6.7.6.0+dirty/src/tools/table/table_cmpt.cc, line: 1399 |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map Exception Reported: Exception: All elements of trc must be greater than or equal to their corresponding blc elements. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const vector<long> &, const String &, const IPosition &, const pair<vector<long>, vector<long>> *const &) at File: /private/var/folders/60/83wxljbx2vlfbx_hy0yfv8rc0000gn/T/build-via-sdist-aibou7sq/casatools-6.7.6.0+dirty/src/tools/table/table_cmpt.cc, line: 1409 |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map Exception Reported: Exception: incr must have length of 2. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map+ ... thrown by casac::variant *casac::table::getcellslice(const std::string &, const long, const std::vector<long> &, const std::vector<long> &, const std::vector<long> &) at File: /private/var/folders/60/83wxljbx2vlfbx_hy0yfv8rc0000gn/T/build-via-sdist-aibou7sq/casatools-6.7.6.0+dirty/src/tools/table/table_cmpt.cc, line: 1469 |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map Exception Reported: Exception: All elements of incr must be greater than 0. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 SEVERE getcellslice::map+ ... thrown by casac::variant *casac::table::getcellslice(const std::string &, const long, const std::vector<long> &, const std::vector<long> &, const std::vector<long> &) at File: /private/var/folders/60/83wxljbx2vlfbx_hy0yfv8rc0000gn/T/build-via-sdist-aibou7sq/casatools-6.7.6.0+dirty/src/tools/table/table_cmpt.cc, line: 1476 |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:07 | test_tool_table.py::table_getcellslice_test::test_exceptions |
| 17-Apr-2026 13:49:07 | Test various exception cases |
| 17-Apr-2026 13:49:07 | PASSED |
| 17-Apr-2026 13:49:07 | |
| 17-Apr-2026 13:49:07 | 2026-04-17 17:49:08 INFO ImageFactory::createImage Created Paged image 'tmp.im' of shape [3, 4] with float valued pixels. |
| 17-Apr-2026 13:49:08 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:08 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:08 | 2026-04-17 17:49:08 INFO name:: No table opened. |
| 17-Apr-2026 13:49:08 | test_tool_table.py::table_getcellslice_test::test_getcellslice |
| 17-Apr-2026 13:49:08 | tests for valid inputs |
| 17-Apr-2026 13:49:08 | PASSED |
| 17-Apr-2026 13:49:08 | |
| 17-Apr-2026 13:49:08 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_table/nose.xml - |
| 17-Apr-2026 13:49:08 | ======================== 13 passed, 1 warning in 2.68s ========================= |
| 17-Apr-2026 13:49:08 | ============================= test session starts ============================== |
| 17-Apr-2026 13:49:08 | platform darwin -- Python 3.12.8, pytest-9.0.3, pluggy-1.6.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6testenv/bin/python3.12 |
| 17-Apr-2026 13:49:08 | cachedir: .pytest_cache |
| 17-Apr-2026 13:49:08 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_quanta |
| 17-Apr-2026 13:49:08 | configfile: pytest.ini |
| 17-Apr-2026 13:49:10 | collecting ... collected 9 items |
| 17-Apr-2026 13:49:10 | |
| 17-Apr-2026 13:49:10 | |
| 17-Apr-2026 13:49:10 | 2026-04-17 17:49:10 SEVERE Exception Reported: Error in QuantumHolder::fromString with input string "bogus": Illegal input units or format |
| 17-Apr-2026 13:49:10 | 2026-04-17 17:49:10 SEVERE + in converting quantity |
| 17-Apr-2026 13:49:10 | test_tool_quanta.py::quanta_convert_test::test_exceptions |
| 17-Apr-2026 13:49:10 | Test various exception cases |
| 17-Apr-2026 13:49:10 | PASSED |
| 17-Apr-2026 13:49:10 | |
| 17-Apr-2026 13:49:11 | test_tool_quanta.py::quanta_convert_test::test_valid |
| 17-Apr-2026 13:49:11 | Test specifying the quantity as a scalar |
| 17-Apr-2026 13:49:11 | PASSED |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | test_tool_quanta.py::quanta_convert_test::test_value_as_string |
| 17-Apr-2026 13:49:11 | Test specifying value as a string |
| 17-Apr-2026 13:49:11 | PASSED |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | 2026-04-17 17:49:12 SEVERE Error in QuantumHolder::fromString with input string "blah": Illegal input units or format |
| 17-Apr-2026 13:49:11 | 2026-04-17 17:49:12 SEVERE + in converting quantity |
| 17-Apr-2026 13:49:11 | 2026-04-17 17:49:12 SEVERE Exception Reported: Error in QuantumHolder::fromString with input string "blah": Illegal input units or format |
| 17-Apr-2026 13:49:11 | 2026-04-17 17:49:12 SEVERE + in converting quantity |
| 17-Apr-2026 13:49:11 | 2026-04-17 17:49:12 SEVERE Error in QuantumHolder::fromString with input string "blah": Illegal input units or format |
| 17-Apr-2026 13:49:11 | 2026-04-17 17:49:12 SEVERE + in converting quantity |
| 17-Apr-2026 13:49:11 | 2026-04-17 17:49:12 SEVERE Exception Reported: Error in QuantumHolder::fromString with input string "blah": Illegal input units or format |
| 17-Apr-2026 13:49:11 | 2026-04-17 17:49:12 SEVERE + in converting quantity |
| 17-Apr-2026 13:49:11 | 2026-04-17 17:49:12 SEVERE Exception Reported: Unit::check Illegal unit string 'zz' |
| 17-Apr-2026 13:49:11 | 2026-04-17 17:49:12 SEVERE Exception Reported: Unit::check Illegal unit string 'zz' |
| 17-Apr-2026 13:49:11 | test_tool_quanta.py::quanta_quantity_test::test_exceptions |
| 17-Apr-2026 13:49:11 | Test various exception cases |
| 17-Apr-2026 13:49:11 | PASSED |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | test_tool_quanta.py::quanta_quantity_test::test_multidimensional_arra_value |
| 17-Apr-2026 13:49:11 | Test specifying the quantity as a multidimensional array |
| 17-Apr-2026 13:49:11 | PASSED |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | test_tool_quanta.py::quanta_quantity_test::test_scalar_value |
| 17-Apr-2026 13:49:11 | Test specifying the quantity as a scalar |
| 17-Apr-2026 13:49:11 | PASSED |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | test_tool_quanta.py::quanta_quantity_test::test_value_as_record |
| 17-Apr-2026 13:49:11 | Test value as record (eg already a quantity). |
| 17-Apr-2026 13:49:11 | This is essentially a reflection operator. |
| 17-Apr-2026 13:49:11 | PASSED |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | test_tool_quanta.py::quanta_quantity_test::test_value_as_string |
| 17-Apr-2026 13:49:11 | Test specifying value as a string |
| 17-Apr-2026 13:49:11 | PASSED |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | test_tool_quanta.py::quanta_quantity_test::test_vector_value |
| 17-Apr-2026 13:49:11 | Test specifying the quantity as a vector |
| 17-Apr-2026 13:49:11 | PASSED |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_quanta/nose.xml - |
| 17-Apr-2026 13:49:11 | ========================= 9 passed, 1 warning in 3.44s ========================= |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_ms_statwt |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_ms_statwt/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_msmetadata |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_msmetadata/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_rebin |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_image_rebin/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_subimage/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_subimage |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_image_subimage/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_subimage/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_statistics/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_statistics |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_image_statistics/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_statistics/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_collapse/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_collapse |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_image_collapse/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_collapse/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_transpose |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_image_transpose/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_regrid |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_image_regrid/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_coordsys/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_coordsys |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_coordsys/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_coordsys/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_simulator/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_simulator |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_simulator/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_simulator/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_msuvbinner |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_msuvbinner/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_ms/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_ms |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_ms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_ms/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_logsink/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_logsink |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_logsink/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_logsink/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_agentflagger |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_agentflagger/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_pv |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_image_pv/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_componentlist |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_componentlist/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_fitprofile |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_image_fitprofile/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_regionmanager/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_regionmanager |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_regionmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_regionmanager/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_image/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_image/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_linearmosaic |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_linearmosaic/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_imagepol |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_table/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_table |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_table/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_table/ |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_quanta/ |
| 17-Apr-2026 13:49:11 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_quanta |
| 17-Apr-2026 13:49:11 | |
| 17-Apr-2026 13:49:11 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/xml/test_tool_quanta/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14/casa6/casatestutils/nosedir/test_tool_quanta/ |
| 17-Apr-2026 13:49:11 | Finished task 'Test wheel' with result: Success |
| 17-Apr-2026 13:49:11 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
| 17-Apr-2026 13:49:11 | Parsing test results under /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR184-TTO14... |
| 17-Apr-2026 13:49:12 | Finished task 'Parse tests' with result: Success |
| 17-Apr-2026 13:49:12 | Running post build plugin 'Docker Container Cleanup' |
| 17-Apr-2026 13:49:12 | Running post build plugin 'NCover Results Collector' |
| 17-Apr-2026 13:49:12 | Running post build plugin 'Build Results Label Collector' |
| 17-Apr-2026 13:49:12 | Running post build plugin 'Clover Results Collector' |
| 17-Apr-2026 13:49:12 | Running post build plugin 'npm Cache Cleanup' |
| 17-Apr-2026 13:49:12 | Running post build plugin 'Artifact Copier' |
| 17-Apr-2026 13:49:12 | Publishing an artifact: macOS15 casatools wheel |
| 17-Apr-2026 13:49:15 | Finished publishing of artifact Non required job artifact Http Compression On : [macOS15 casatools wheel], patterns: [casatools*.whl] anchored at: [wheeldirectory/] in 3.626 s |
| 17-Apr-2026 13:49:15 | Finalising the build... |
| 17-Apr-2026 13:49:15 | Stopping timer. |
| 17-Apr-2026 13:49:15 | Build CASASPECS-PR184-TTO14-1 completed. |
| 17-Apr-2026 13:49:16 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
| 17-Apr-2026 13:49:16 | Running on server: post build plugin 'NCover Results Collector' |
| 17-Apr-2026 13:49:16 | Running on server: post build plugin 'Build Labeller' |
| 17-Apr-2026 13:49:16 | Running on server: post build plugin 'Clover Delta Calculator' |
| 17-Apr-2026 13:49:16 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
| 17-Apr-2026 13:49:16 | All post build plugins have finished |
| 17-Apr-2026 13:49:16 | Generating build results summary... |
| 17-Apr-2026 13:49:16 | Saving build results to disk... |
| 17-Apr-2026 13:49:16 | Store variable context... |
| 17-Apr-2026 13:49:16 | Finished building CASASPECS-PR184-TTO14-1. |