From https://open-bitbucket.nrao.edu/scm/casa/casa-data
   c0180eb..9057d8c  master     -> origin/master
Downloading geodetic/IERSpredict/table.dat (3.3 KB)
Downloading geodetic/IERSpredict/table.f0 (263 KB)
Downloading geodetic/IERSpredict/table.lock (325 B)
fatal: could not read Username for 'https://open-bitbucket.nrao.edu': No such device or address
Error response from daemon: No such container: wheel-container-test
Error response from daemon: No such container: wheel-container-test
2026-04-06 19:32:54        INFO        ImageRegion::fromRecord        Selected bounding box :
2026-04-06 19:32:54        INFO        ImageRegion::fromRecord+            [0, 0, 0, 0] to [8, 8, 99, 0]  (17:42:36.087, -29.00.47.589, 1.41335e+09Hz, I to 17:42:35.477, -29.00.39.591, 1.4153e+09Hz, I)
2026-04-06 19:32:54        WARN        ImageProfileFitter::_setFitterElements        Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary        Number of profiles       = 1
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary        Number of fits attempted = 1
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary        Number succeeded         = 1
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary        Number converged         = 1
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary        Number valid             = 1
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary        ****** Fit performed at Mon Apr 6 19:32:54 2026******
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+        
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+        Input parameters ---
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+               --- imagename:           /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile/specfit_multipix_2gauss.fits
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+               --- region:             
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+               --- box:                 
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+               --- channels:           
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+               --- stokes:              I
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+               --- mask:                maskim>-100
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+               --- number of Gaussian singlets: 2
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+               --- number of Gaussian multiplets: 0
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+               --- no polynomial fit
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+               --- One profile fit, averaged over several pixels if necessary
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary        Fit   :
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+            RA           :   17:42:35.782
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+            Dec          :  -29.00.43.590
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+            Stokes       : I
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+            Pixel        : [4.000, 4.000,  *, 0.000]
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+            Attempted    : YES
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+            Converged    : YES
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+            Iterations   : 7
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+            Valid        : YES
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+                Type     : GAUSSIAN
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+                Peak     : 49.7 +/- 4.0 Jy
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+                Center   : -237.7 +/- 1.7 km/s
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+                           89.96 +/- 0.40 pixel
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+                FWHM     : 42.4 +/- 4.0 km/s
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+                           10.17 +/- 0.97 pixel
2026-04-06 19:32:54        INFO        ImageProfileFitterResults::logSummary+                Integral : 2.25 +/- 0.28 kJy.km/s
2026-04-06 19:32:55        INFO        SubImageFactory::createImage        Creating image 'blahxx.im' of shape [1536, 1536, 1, 2]
2026-04-06 19:32:55        INFO        name::        No table opened.
2026-04-06 19:32:55        INFO        showcache::        The Table Cache is empty.
2026-04-06 19:32:55        INFO        name::        No table opened.
2026-04-06 19:32:55        INFO        showcache::        The Table Cache is empty.
2026-04-06 19:32:55        SEVERE        image::open (file src/tools/image/image_cmpt.cc, line 4208)        Exception Reported: Exception: File name is empty.
2026-04-06 19:32:55        SEVERE        image::open (file src/tools/image/image_cmpt.cc, line 4208)+        ... thrown by static void casa::ImageFactory::_checkInfile(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 371
2026-04-06 19:32:55        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2026-04-06 19:32:55        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-04-06 19:32:55        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2026-04-06 19:32:55        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2026-04-06 19:32:55        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-04-06 19:32:55        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2026-04-06 19:32:55        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2026-04-06 19:32:55        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-04-06 19:32:55        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2026-04-06 19:32:55        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-04-06 19:32:55        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-04-06 19:32:55        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-04-06 19:32:55        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2026-04-06 19:32:55        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-04-06 19:32:55        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2026-04-06 19:32:55        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2026-04-06 19:32:55        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-04-06 19:32:55        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2026-04-06 19:32:55        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-04-06 19:32:55        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-04-06 19:32:55        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-04-06 19:32:55        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2026-04-06 19:32:55        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-04-06 19:32:55        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2026-04-06 19:32:55        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Ambiguous axis specification. Both r and r match image axis name right ascension
2026-04-06 19:32:55        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-04-06 19:32:55        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Ambiguous axis specification. Both r and r match image axis name right ascension
2026-04-06 19:32:55        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-04-06 19:32:55        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-04-06 19:32:55        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-04-06 19:32:55        INFO        name::        No table opened.
2026-04-06 19:32:55        INFO        showcache::        The Table Cache is empty.
2026-04-06 19:32:55        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2026-04-06 19:32:55        INFO        ::::ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2026-04-06 19:32:55        INFO        ::::image::fromshape        Ran ia.fromshape
2026-04-06 19:32:55        INFO        ::::image::fromshape        ia.fromshape(outfile="", shape=[10,10,4,10], csys={...}, linear=false, overwrite=false, log=true, type="f")
2026-04-06 19:32:55        INFO        ::::image::transpose        Ran ia.transpose
2026-04-06 19:32:55        INFO        ::::image::transpose        ia.transpose(outfile="", order="3210")
2026-04-06 19:32:55        INFO        name::        No table opened.
2026-04-06 19:32:55        INFO        showcache::        The Table Cache is empty.
2026-04-06 19:32:55        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 20, 30] with float valued pixels.
2026-04-06 19:32:55        INFO        image::_casaQuantityFromVar         Will use values specified in major, minor, pa to set beam
2026-04-06 19:32:55        INFO        BeamManipulator::set        Setting (global) restoring beam.
2026-04-06 19:32:55        INFO        BeamManipulator::set        Beam parameters:  Major          : 4 arcmin
2026-04-06 19:32:55        INFO        BeamManipulator::set+          Minor          : 3 arcmin
2026-04-06 19:32:55        INFO        BeamManipulator::set+          Position Angle : 0 deg
2026-04-06 19:32:55        INFO        name::        No table opened.
2026-04-06 19:32:55        INFO        showcache::        The Table Cache is empty.
2026-04-06 19:32:55        INFO        SubImageFactory::createImage        Creating image 'straight_copy_0' of shape [5, 6, 7]
2026-04-06 19:32:56        INFO        SubImageFactory::createImage        Creating image 'straight_copy_1' of shape [5, 6, 7]
2026-04-06 19:32:56        INFO        SubImageFactory::createImage        Creating image 'straight_copy_2' of shape [5, 6, 7]
2026-04-06 19:32:56        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2026-04-06 19:32:57        INFO        SubImageFactory::createImage        Creating image 'straight_copy_3' of shape [5, 6, 7]
2026-04-06 19:32:57        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2026-04-06 19:32:57        INFO        name::        No table opened.
2026-04-06 19:32:57        INFO        showcache::        The Table Cache is empty.
2026-04-06 19:32:57        INFO        SubImageFactory::createImage        Creating image 'transpose_0' of shape [6, 7, 5]
2026-04-06 19:32:57        INFO        SubImageFactory::createImage        Creating image 'transpose_1' of shape [6, 7, 5]
2026-04-06 19:32:58        INFO        SubImageFactory::createImage        Creating image 'transpose_2' of shape [6, 7, 5]
2026-04-06 19:32:58        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2026-04-06 19:32:58        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2026-04-06 19:32:59        INFO        SubImageFactory::createImage        Creating image 'transpose_3' of shape [6, 7, 5]
2026-04-06 19:32:59        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2026-04-06 19:32:59        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2026-04-06 19:32:59        INFO        name::        No table opened.
2026-04-06 19:32:59        INFO        showcache::        The Table Cache is empty.
tar: work: Cannot stat: No such file or directory
tar: Exiting with failure status due to previous errors