Build log

The build generated 64,508 lines of output. The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.

28-Nov-2025 07:57:21	2025-11-28 12:57:21 WARN MS2ASDM::writeSBSummaryAndExecBlockStubs() Observation time range is zero length for obs ID 20 in MS Observation table.
28-Nov-2025 07:57:21	2025-11-28 12:57:21 WARN MS2ASDM::writeSBSummaryAndExecBlockStubs()+ Will try to proceed ...
28-Nov-2025 07:57:22	2025-11-28 12:57:22 WARN MS2ASDM::writePointing() No ENCODER column in MS Pointing table. Will use DIRECTION instead.
28-Nov-2025 07:57:22	xmllint: using libxml version 21305
28-Nov-2025 07:57:22	compiled with: Threads Tree Output Push Reader Patterns Writer SAXv1 FTP HTTP DTDValid HTML C14N Catalog XPath XPointer XInclude Iconv ICU ISO8859X Unicode Regexps Automata Schemas Schematron Modules Debug Zlib Lzma
28-Nov-2025 07:57:22	test_task_exportasdm.py::exportasdm_test::test7
28-Nov-2025 07:57:22	Test 7: simulated input MS, default output
28-Nov-2025 07:57:22	Verifying asdm test7exportasdm-output.asdm
28-Nov-2025 07:57:22	Note: xml validation not possible since ASDM DTDs (schemas) not yet online.
28-Nov-2025 07:57:22	PASSED
28-Nov-2025 07:57:22
28-Nov-2025 07:57:22	2025-11-28 12:57:22 WARN MS2ASDM::writeProcessor() MS Processor table is empty. Will try to proceed assuming a standard ALMA Correlator.
28-Nov-2025 07:57:22	2025-11-28 12:57:22 WARN MS2ASDM::writeCorrelatorMode() Unknown telescope name: BIMA. Assuming ALMA_BASELINE.
28-Nov-2025 07:57:22	2025-11-28 12:57:22 WARN MS2ASDM::writeFeed() Setting receiver ID to zero (ALMA convention).
28-Nov-2025 07:57:22	2025-11-28 12:57:22 WARN MS2ASDM::writeFeed() Assuming single-feed receivers. Setting FeedNum to 1 (as for ALMA).
28-Nov-2025 07:57:22	2025-11-28 12:57:22 WARN MS2ASDM::writeState() MS State table is empty. Creating ASDM State table with one on-source entry.
28-Nov-2025 07:57:22	2025-11-28 12:57:22 WARN MS2ASDM::writeSysCal() MS SysCal table doesn't exist or is empty. Creating ASDM SysCal table with default entries.
28-Nov-2025 07:57:22	2025-11-28 12:57:22 WARN MS2ASDM::writeConfigDesc() MS Processor table is empty. Will assume processor type is CORRELATOR.
28-Nov-2025 07:57:22	2025-11-28 12:57:22 WARN MS2ASDM::writeSBSummaryAndExecBlockStubs() Observation time range is zero length for obs ID 0 in MS Observation table.
28-Nov-2025 07:57:22	2025-11-28 12:57:22 WARN MS2ASDM::writeSBSummaryAndExecBlockStubs()+ Will try to proceed ...
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writePointing() MS Pointing table doesn't exist or is empty.
28-Nov-2025 07:57:22	xmllint: using libxml version 21305
28-Nov-2025 07:57:22	compiled with: Threads Tree Output Push Reader Patterns Writer SAXv1 FTP HTTP DTDValid HTML C14N Catalog XPath XPointer XInclude Iconv ICU ISO8859X Unicode Regexps Automata Schemas Schematron Modules Debug Zlib Lzma
28-Nov-2025 07:57:22	test_task_exportasdm.py::exportasdm_test::test8
28-Nov-2025 07:57:22	Test 8: real input MS, default output
28-Nov-2025 07:57:22	Verifying asdm test8exportasdm-output.asdm
28-Nov-2025 07:57:22	Note: xml validation not possible since ASDM DTDs (schemas) not yet online.
28-Nov-2025 07:57:22	PASSED
28-Nov-2025 07:57:22
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeProcessor() MS Processor table is empty. Will try to proceed assuming a standard ALMA Correlator.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeFeed() MS Feed table contains reference to a Beam table row 0 but a Beam table is not implemented in CASA. Ignoring.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeFeed() MS Feed table contains reference to a Beam table row 0 but a Beam table is not implemented in CASA. Ignoring.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeFeed() MS Feed table contains reference to a Beam table row 0 but a Beam table is not implemented in CASA. Ignoring.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeFeed() MS Feed table contains reference to a Beam table row 0 but a Beam table is not implemented in CASA. Ignoring.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeFeed() MS Feed table contains reference to a Beam table row 0 but a Beam table is not implemented in CASA. Ignoring.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeFeed() MS Feed table contains reference to a Beam table row 0 but a Beam table is not implemented in CASA. Ignoring.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeFeed() MS Feed table contains reference to a Beam table row 0 but a Beam table is not implemented in CASA. Ignoring.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeFeed() MS Feed table contains reference to a Beam table row 0 but a Beam table is not implemented in CASA. Ignoring.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeFeed() MS Feed table contains reference to a Beam table row 0 but a Beam table is not implemented in CASA. Ignoring.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeFeed() MS Feed table contains reference to a Beam table row 0 but a Beam table is not implemented in CASA. Ignoring.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeFeed() MS Feed table contains reference to a Beam table row 0 but a Beam table is not implemented in CASA. Ignoring.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeFeed() MS Feed table contains reference to a Beam table row 0 but a Beam table is not implemented in CASA. Ignoring.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeFeed() MS Feed table contains reference to a Beam table row 0 but a Beam table is not implemented in CASA. Ignoring.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeFeed() MS Feed table contains reference to a Beam table row 0 but a Beam table is not implemented in CASA. Ignoring.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeFeed() MS Feed table contains reference to a Beam table row 0 but a Beam table is not implemented in CASA. Ignoring.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeFeed() MS Feed table contains reference to a Beam table row 0 but a Beam table is not implemented in CASA. Ignoring.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeState() MS State table is empty. Creating ASDM State table with one on-source entry.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeSysCal() MS SysCal table doesn't exist or is empty. Creating ASDM SysCal table with default entries.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeConfigDesc() MS Processor table is empty. Will assume processor type is CORRELATOR.
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writeConfigDesc() Still, the MS Main table seems to refer to an existing processor id 0. Will try to proceed ...
28-Nov-2025 07:57:22	2025-11-28 12:57:23 WARN MS2ASDM::writePointing() No ENCODER column in MS Pointing table. Will use DIRECTION instead.
28-Nov-2025 07:57:22	xmllint: using libxml version 21305
28-Nov-2025 07:57:22	compiled with: Threads Tree Output Push Reader Patterns Writer SAXv1 FTP HTTP DTDValid HTML C14N Catalog XPath XPointer XInclude Iconv ICU ISO8859X Unicode Regexps Automata Schemas Schematron Modules Debug Zlib Lzma
28-Nov-2025 07:57:22	test_task_exportasdm.py::exportasdm_test::test9
28-Nov-2025 07:57:22	Test 9: simulated input MS with pointing table, default output
28-Nov-2025 07:57:22	Verifying asdm test9exportasdm-output.asdm
28-Nov-2025 07:57:22	Note: xml validation not possible since ASDM DTDs (schemas) not yet online.
28-Nov-2025 07:57:22	PASSED
28-Nov-2025 07:57:22
28-Nov-2025 07:57:23	test_task_exportasdm.py::exportasdm_test2::test1a
28-Nov-2025 07:57:23	Exportasdm: Cleanup
28-Nov-2025 07:57:23	PASSED
28-Nov-2025 07:57:23
28-Nov-2025 07:57:23	- generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_exportasdm/nose.xml -
28-Nov-2025 07:57:23	=========================== short test summary info ============================
28-Nov-2025 07:57:23	SKIPPED [1] test_task_exportasdm.py:281: test disabled
28-Nov-2025 07:57:23	================== 14 passed, 1 skipped, 1 warning in 16.97s ===================
28-Nov-2025 07:57:23	============================= test session starts ==============================
28-Nov-2025 07:57:23	platform darwin -- Python 3.12.8, pytest-9.0.1, pluggy-1.6.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6testenv/bin/python3.12
28-Nov-2025 07:57:23	cachedir: .pytest_cache
28-Nov-2025 07:57:23	rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_getantposalma
28-Nov-2025 07:57:23	configfile: pytest.ini
28-Nov-2025 07:57:26	collecting ... collected 2 items
28-Nov-2025 07:57:26
28-Nov-2025 07:57:26
28-Nov-2025 07:57:26	2025-11-28 12:57:26 SEVERE getantposalma::::casa Task getantposalma raised an exception of class ValueError with the following message: Parameter outfile must be specified
28-Nov-2025 07:57:26	2025-11-28 12:57:26 SEVERE getantposalma::::casa Task getantposalma raised an exception of class ValueError with the following message: Parameter outfile must be specified
28-Nov-2025 07:57:26	2025-11-28 12:57:26 SEVERE getantposalma::::casa Task getantposalma raised an exception of class RuntimeError with the following message: A file or directory named kyfjak.blah already exists and overwrite is False, so exiting. Either rename the existing file or directory, change the value of overwrite to True, or both.
28-Nov-2025 07:57:26	2025-11-28 12:57:26 SEVERE getantposalma::::casa Task getantposalma raised an exception of class ValueError with the following message: Parameter hosts must be specified
28-Nov-2025 07:57:26	2025-11-28 12:57:26 SEVERE getantposalma::::casa Task getantposalma raised an exception of class ValueError with the following message: Parameter tw should contain exactly one comma that separates two times
28-Nov-2025 07:57:26	2025-11-28 12:57:26 SEVERE getantposalma::::casa Task getantposalma raised an exception of class ValueError with the following message: Begin time 1 does not appear to have a valid format. The correct format is of the form YYYY-MM-DDThh:mm:ss.
28-Nov-2025 07:57:26	2025-11-28 12:57:26 SEVERE getantposalma::::casa Task getantposalma raised an exception of class ValueError with the following message: End time 3 does not appear to have a valid format. The correct format is of the form YYYY-MM-DDThh:mm:ss.
28-Nov-2025 07:57:26	2025-11-28 12:57:26 SEVERE getantposalma::::casa Task getantposalma raised an exception of class ValueError with the following message: Parameter tw, start time (2023-04-15T17:15:22) must be less than end time (2023-03-02T14:41:00).
28-Nov-2025 07:57:26	2025-11-28 12:57:26 SEVERE getantposalma::::casa Task getantposalma raised an exception of class ValueError with the following message: Parameter tw, start time (2023-04-15T17:15:22) must be less than end time (2023-04-15T17:15:22).
28-Nov-2025 07:57:26	2025-11-28 12:57:26 SEVERE getantposalma::::casa Task getantposalma raised an exception of class ValueError with the following message: If a number, parameter snr (-1) must be non-negative.
28-Nov-2025 07:57:26	2025-11-28 12:57:26 SEVERE getantposalma::::casa Task getantposalma raised an exception of class ValueError with the following message: Parameter hosts: bogus./12?.example.com is not a valid host expressed as a URL.
28-Nov-2025 07:57:26	2025-11-28 12:57:26 WARN getantposalma::::casa Caught URLError: <urlopen error [Errno 8] nodename nor servname provided, or not known>
28-Nov-2025 07:57:26	2025-11-28 12:57:26 SEVERE getantposalma::::casa Task getantposalma raised an exception of class RuntimeError with the following message: All URLs failed to return an antenna position list.
28-Nov-2025 07:57:26	test_task_getantposalma.py::getantposalma_test::test_inputs
28-Nov-2025 07:57:26	Test inputs meet various constraints. All the exceptions are thrown
28-Nov-2025 07:57:26	without having queried the server
28-Nov-2025 07:57:26	PASSED
28-Nov-2025 07:57:26
28-Nov-2025 07:57:26	2025-11-28 12:57:26 WARN getantposalma::::casa server path /?asdm=uid%3A%2F%2FA002%2FX10ac6bc%2FX896d&search=both_latest
28-Nov-2025 07:57:27	2025-11-28 12:57:27 WARN getantposalma::::casa server path /?asdm=uid%3A%2F%2FA002%2FX10ac6bc%2FX896d&snr=5&search=both_latest
28-Nov-2025 07:57:27	test_task_getantposalma.py::getantposalma_test::test_json_file_writing
28-Nov-2025 07:57:27	Test successful writing of json file of antenna positions
28-Nov-2025 07:57:27	PASSED
28-Nov-2025 07:57:27
28-Nov-2025 07:57:27	- generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_getantposalma/nose.xml -
28-Nov-2025 07:57:27	========================= 2 passed, 1 warning in 4.12s =========================
28-Nov-2025 07:57:27	============================= test session starts ==============================
28-Nov-2025 07:57:27	platform darwin -- Python 3.12.8, pytest-9.0.1, pluggy-1.6.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6testenv/bin/python3.12
28-Nov-2025 07:57:27	cachedir: .pytest_cache
28-Nov-2025 07:57:27	rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_vishead
28-Nov-2025 07:57:27	configfile: pytest.ini
28-Nov-2025 07:57:30	collecting ... vishead tests will use data from /opt/casa/data/casatestdata/unittest/vishead/
28-Nov-2025 07:57:30	collected 9 items
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	test_task_vishead.py::vishead_test::test_accessors
28-Nov-2025 07:57:30	Vishead: Test put/get modes
28-Nov-2025 07:57:30	List value of cal_grp: (array([0, 0, 0, 0, 0]), {})
28-Nov-2025 07:57:30	Read value: (array([0, 0, 0, 0, 0]), {})
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 1 (get cal_grp[0]) start ***********
28-Nov-2025 07:57:30	*********** Test get cal_grp[0] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 2 (get cal_grp[1]) start ***********
28-Nov-2025 07:57:30	*********** Test get cal_grp[1] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 3 (put/get cal_grp[0]) start ***********
28-Nov-2025 07:57:30	New value: 42.0
28-Nov-2025 07:57:30	Read new value: 42
28-Nov-2025 07:57:30	*********** Test put/get cal_grp[0] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 4 (put/get cal_grp[1]) start ***********
28-Nov-2025 07:57:30	New value: 42.0
28-Nov-2025 07:57:30	Read new value: 42
28-Nov-2025 07:57:30	*********** Test put/get cal_grp[1] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 5 (put/get cal_grp[2]) start ***********
28-Nov-2025 07:57:30	New value: 42.0
28-Nov-2025 07:57:30	Read new value: 42
28-Nov-2025 07:57:30	*********** Test put/get cal_grp[2] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 6 (put/get cal_grp[3]) start ***********
28-Nov-2025 07:57:30	New value: 42.0
28-Nov-2025 07:57:30	Read new value: 42
28-Nov-2025 07:57:30	*********** Test put/get cal_grp[3] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 7 (put/get cal_grp[4]) start ***********
28-Nov-2025 07:57:30	New value: 42.0
28-Nov-2025 07:57:30	Read new value: 42
28-Nov-2025 07:57:30	*********** Test put/get cal_grp[4] OK ***********
28-Nov-2025 07:57:30	List value of field: (array(['3C273-F0', '1310+323-F0', 'NGC4826-F0', 'NGC4826-F1',
28-Nov-2025 07:57:30	'NGC4826-F2', 'NGC4826-F3', 'NGC4826-F4', 'NGC4826-F5',
28-Nov-2025 07:57:30	'NGC4826-F6'], dtype='<U11'), {})
28-Nov-2025 07:57:30	Read value: (array(['3C273-F0', '1310+323-F0', 'NGC4826-F0', 'NGC4826-F1',
28-Nov-2025 07:57:30	'NGC4826-F2', 'NGC4826-F3', 'NGC4826-F4', 'NGC4826-F5',
28-Nov-2025 07:57:30	'NGC4826-F6'], dtype='<U11'), {})
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 8 (get field[0]) start ***********
28-Nov-2025 07:57:30	*********** Test get field[0] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 9 (get field[1]) start ***********
28-Nov-2025 07:57:30	*********** Test get field[1] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 10 (put/get field[0]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_3C273-F0
28-Nov-2025 07:57:30	Read new value: the_coolest_3C273-F0
28-Nov-2025 07:57:30	*********** Test put/get field[0] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 11 (put/get field[1]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_1310+323-F0
28-Nov-2025 07:57:30	Read new value: the_coolest_1310+323-F0
28-Nov-2025 07:57:30	*********** Test put/get field[1] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 12 (put/get field[2]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_NGC4826-F0
28-Nov-2025 07:57:30	Read new value: the_coolest_NGC4826-F0
28-Nov-2025 07:57:30	*********** Test put/get field[2] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 13 (put/get field[3]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_NGC4826-F1
28-Nov-2025 07:57:30	Read new value: the_coolest_NGC4826-F1
28-Nov-2025 07:57:30	*********** Test put/get field[3] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 14 (put/get field[4]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_NGC4826-F2
28-Nov-2025 07:57:30	Read new value: the_coolest_NGC4826-F2
28-Nov-2025 07:57:30	*********** Test put/get field[4] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 15 (put/get field[5]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_NGC4826-F3
28-Nov-2025 07:57:30	Read new value: the_coolest_NGC4826-F3
28-Nov-2025 07:57:30	*********** Test put/get field[5] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 16 (put/get field[6]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_NGC4826-F4
28-Nov-2025 07:57:30	Read new value: the_coolest_NGC4826-F4
28-Nov-2025 07:57:30	*********** Test put/get field[6] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 17 (put/get field[7]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_NGC4826-F5
28-Nov-2025 07:57:30	Read new value: the_coolest_NGC4826-F5
28-Nov-2025 07:57:30	*********** Test put/get field[7] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 18 (put/get field[8]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_NGC4826-F6
28-Nov-2025 07:57:30	Read new value: the_coolest_NGC4826-F6
28-Nov-2025 07:57:30	*********** Test put/get field[8] OK ***********
28-Nov-2025 07:57:30	List value of fld_code: (array(['', '', '', '', '', '', '', '', ''], dtype='<U5'), {})
28-Nov-2025 07:57:30	Read value: (array(['', '', '', '', '', '', '', '', ''], dtype='<U5'), {})
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 19 (get fld_code[0]) start ***********
28-Nov-2025 07:57:30	*********** Test get fld_code[0] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 20 (get fld_code[1]) start ***********
28-Nov-2025 07:57:30	*********** Test get fld_code[1] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 21 (put/get fld_code[0]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_
28-Nov-2025 07:57:30	Read new value: the_coolest_
28-Nov-2025 07:57:30	*********** Test put/get fld_code[0] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 22 (put/get fld_code[1]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_
28-Nov-2025 07:57:30	Read new value: the_coolest_
28-Nov-2025 07:57:30	*********** Test put/get fld_code[1] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 23 (put/get fld_code[2]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_
28-Nov-2025 07:57:30	Read new value: the_coolest_
28-Nov-2025 07:57:30	*********** Test put/get fld_code[2] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 24 (put/get fld_code[3]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_
28-Nov-2025 07:57:30	Read new value: the_coolest_
28-Nov-2025 07:57:30	*********** Test put/get fld_code[3] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 25 (put/get fld_code[4]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_
28-Nov-2025 07:57:30	Read new value: the_coolest_
28-Nov-2025 07:57:30	*********** Test put/get fld_code[4] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 26 (put/get fld_code[5]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_
28-Nov-2025 07:57:30	Read new value: the_coolest_
28-Nov-2025 07:57:30	*********** Test put/get fld_code[5] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 27 (put/get fld_code[6]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_
28-Nov-2025 07:57:30	Read new value: the_coolest_
28-Nov-2025 07:57:30	*********** Test put/get fld_code[6] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 28 (put/get fld_code[7]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_
28-Nov-2025 07:57:30	Read new value: the_coolest_
28-Nov-2025 07:57:30	*********** Test put/get fld_code[7] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 29 (put/get fld_code[8]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_
28-Nov-2025 07:57:30	Read new value: the_coolest_
28-Nov-2025 07:57:30	*********** Test put/get fld_code[8] OK ***********
28-Nov-2025 07:57:30	List value of freq_group_name: (array(['SIDEBAND-AVG', 'SIDEBAND-AVG', 'MULTI-CHANNEL-DATA',
28-Nov-2025 07:57:30	'MULTI-CHANNEL-DATA', 'MULTI-CHANNEL-DATA', 'MULTI-CHANNEL-DATA'],
28-Nov-2025 07:57:30	dtype='<U18'), {})
28-Nov-2025 07:57:30	Read value: (array(['SIDEBAND-AVG', 'SIDEBAND-AVG', 'MULTI-CHANNEL-DATA',
28-Nov-2025 07:57:30	'MULTI-CHANNEL-DATA', 'MULTI-CHANNEL-DATA', 'MULTI-CHANNEL-DATA'],
28-Nov-2025 07:57:30	dtype='<U18'), {})
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 30 (get freq_group_name[0]) start ***********
28-Nov-2025 07:57:30	*********** Test get freq_group_name[0] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 31 (get freq_group_name[1]) start ***********
28-Nov-2025 07:57:30	*********** Test get freq_group_name[1] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 32 (put/get freq_group_name[0]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_SIDEBAND-AVG
28-Nov-2025 07:57:30	Read new value: the_coolest_SIDEBAND-AVG
28-Nov-2025 07:57:30	*********** Test put/get freq_group_name[0] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 33 (put/get freq_group_name[1]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_SIDEBAND-AVG
28-Nov-2025 07:57:30	Read new value: the_coolest_SIDEBAND-AVG
28-Nov-2025 07:57:30	*********** Test put/get freq_group_name[1] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 34 (put/get freq_group_name[2]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_MULTI-CHANNEL-DATA
28-Nov-2025 07:57:30	Read new value: the_coolest_MULTI-CHANNEL-DATA
28-Nov-2025 07:57:30	*********** Test put/get freq_group_name[2] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 35 (put/get freq_group_name[3]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_MULTI-CHANNEL-DATA
28-Nov-2025 07:57:30	Read new value: the_coolest_MULTI-CHANNEL-DATA
28-Nov-2025 07:57:30	*********** Test put/get freq_group_name[3] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 36 (put/get freq_group_name[4]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_MULTI-CHANNEL-DATA
28-Nov-2025 07:57:30	Read new value: the_coolest_MULTI-CHANNEL-DATA
28-Nov-2025 07:57:30	*********** Test put/get freq_group_name[4] OK ***********
28-Nov-2025 07:57:30
28-Nov-2025 07:57:30	*********** Test 37 (put/get freq_group_name[5]) start ***********
28-Nov-2025 07:57:30	New value: the_coolest_MULTI-CHANNEL-DATA
28-Nov-2025 07:57:30	Read new value: the_coolest_MULTI-CHANNEL-DATA
28-Nov-2025 07:57:30	*********** Test put/get freq_group_name[5] OK ***********
28-Nov-2025 07:57:30	List value of log: ({'r1': array([['See HISTORY for BIMA observing log']], dtype='<U34'), 'r2': array([['See HISTORY for BIMA observing log']], dtype='<U34'), 'r3': array([['See HISTORY for BIMA observing log']], dtype='<U34'), 'r4': array([['See HISTORY for BIMA observing log']], dtype='<U34'), 'r5': array([['See HISTORY for BIMA observing log']], dtype='<U34')}, {})
28-Nov-2025 07:57:31	Read value: ({'r1': array([['See HISTORY for BIMA observing log']], dtype='<U34'), 'r2': array([['See HISTORY for BIMA observing log']], dtype='<U34'), 'r3': array([['See HISTORY for BIMA observing log']], dtype='<U34'), 'r4': array([['See HISTORY for BIMA observing log']], dtype='<U34'), 'r5': array([['See HISTORY for BIMA observing log']], dtype='<U34')}, {})
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 38 (get log[0]) start ***********
28-Nov-2025 07:57:31	*********** Test get log[0] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 39 (get log[1]) start ***********
28-Nov-2025 07:57:31	*********** Test get log[1] OK ***********
28-Nov-2025 07:57:31	log is probably a column with variable length arrays, don't try to write that
28-Nov-2025 07:57:31	List value of observer: (array(['', '', '', '', ''], dtype='<U5'), {})
28-Nov-2025 07:57:31	Read value: (array(['', '', '', '', ''], dtype='<U5'), {})
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 40 (get observer[0]) start ***********
28-Nov-2025 07:57:31	*********** Test get observer[0] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 41 (get observer[1]) start ***********
28-Nov-2025 07:57:31	*********** Test get observer[1] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 42 (put/get observer[0]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_
28-Nov-2025 07:57:31	Read new value: the_coolest_
28-Nov-2025 07:57:31	*********** Test put/get observer[0] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 43 (put/get observer[1]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_
28-Nov-2025 07:57:31	Read new value: the_coolest_
28-Nov-2025 07:57:31	*********** Test put/get observer[1] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 44 (put/get observer[2]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_
28-Nov-2025 07:57:31	Read new value: the_coolest_
28-Nov-2025 07:57:31	*********** Test put/get observer[2] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 45 (put/get observer[3]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_
28-Nov-2025 07:57:31	Read new value: the_coolest_
28-Nov-2025 07:57:31	*********** Test put/get observer[3] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 46 (put/get observer[4]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_
28-Nov-2025 07:57:31	Read new value: the_coolest_
28-Nov-2025 07:57:31	*********** Test put/get observer[4] OK ***********
28-Nov-2025 07:57:31	List value of project: (array(['t108c115.n48', 't108c115.n48', 't108c115.n48', 't108c115.n48',
28-Nov-2025 07:57:31	't108c115.n48'], dtype='<U12'), {})
28-Nov-2025 07:57:31	Read value: (array(['t108c115.n48', 't108c115.n48', 't108c115.n48', 't108c115.n48',
28-Nov-2025 07:57:31	't108c115.n48'], dtype='<U12'), {})
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 47 (get project[0]) start ***********
28-Nov-2025 07:57:31	*********** Test get project[0] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 48 (get project[1]) start ***********
28-Nov-2025 07:57:31	*********** Test get project[1] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 49 (put/get project[0]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_t108c115.n48
28-Nov-2025 07:57:31	Read new value: the_coolest_t108c115.n48
28-Nov-2025 07:57:31	*********** Test put/get project[0] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 50 (put/get project[1]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_t108c115.n48
28-Nov-2025 07:57:31	Read new value: the_coolest_t108c115.n48
28-Nov-2025 07:57:31	*********** Test put/get project[1] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 51 (put/get project[2]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_t108c115.n48
28-Nov-2025 07:57:31	Read new value: the_coolest_t108c115.n48
28-Nov-2025 07:57:31	*********** Test put/get project[2] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 52 (put/get project[3]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_t108c115.n48
28-Nov-2025 07:57:31	Read new value: the_coolest_t108c115.n48
28-Nov-2025 07:57:31	*********** Test put/get project[3] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 53 (put/get project[4]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_t108c115.n48
28-Nov-2025 07:57:31	Read new value: the_coolest_t108c115.n48
28-Nov-2025 07:57:31	*********** Test put/get project[4] OK ***********
28-Nov-2025 07:57:31	List value of ptcs: ({'r1': array([[[-3.01456907]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.03582093]]]), 'r2': array([[[-2.83407554]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.56453539]]]), 'r3': array([[[-2.89402933]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.37847028]]]), 'r4': array([[[-2.89425879]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.37847028]]]), 'r5': array([[[-2.89414422]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.378655 ]]]), 'r6': array([[[-2.89391445]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.378655 ]]]), 'r7': array([[[-2.89379988]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.37847028]]]), 'r8': array([[[-2.89391445]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.37828557]]]), 'r9': array([[[-2.89414422]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.37828557]]])}, {'MEASINFO': {'Ref': 'J2000', 'type': 'direction'}, 'QuantumUnits': array(['rad', 'rad'], dtype='<U3')})
28-Nov-2025 07:57:31	Read value: ({'r1': array([[[-3.01456907]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.03582093]]]), 'r2': array([[[-2.83407554]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.56453539]]]), 'r3': array([[[-2.89402933]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.37847028]]]), 'r4': array([[[-2.89425879]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.37847028]]]), 'r5': array([[[-2.89414422]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.378655 ]]]), 'r6': array([[[-2.89391445]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.378655 ]]]), 'r7': array([[[-2.89379988]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.37847028]]]), 'r8': array([[[-2.89391445]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.37828557]]]), 'r9': array([[[-2.89414422]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.37828557]]])}, {'MEASINFO': {'Ref': 'J2000', 'type': 'direction'}, 'QuantumUnits': array(['rad', 'rad'], dtype='<U3')})
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 54 (get ptcs[0]) start ***********
28-Nov-2025 07:57:31	*********** Test get ptcs[0] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 55 (get ptcs[1]) start ***********
28-Nov-2025 07:57:31	*********** Test get ptcs[1] OK ***********
28-Nov-2025 07:57:31	ptcs is probably a column with variable length arrays, don't try to write that
28-Nov-2025 07:57:31	List value of release_date: (array([4.44762648e+09, 4.44765409e+09, 4.44765349e+09, 4.44765409e+09,
28-Nov-2025 07:57:31	4.44765349e+09]), {'MEASINFO': {'Ref': 'UTC', 'type': 'epoch'}, 'QuantumUnits': array(['s'], dtype='<U1')})
28-Nov-2025 07:57:31	Read value: (array([4.44762648e+09, 4.44765409e+09, 4.44765349e+09, 4.44765409e+09,
28-Nov-2025 07:57:31	4.44765349e+09]), {'MEASINFO': {'Ref': 'UTC', 'type': 'epoch'}, 'QuantumUnits': array(['s'], dtype='<U1')})
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 56 (get release_date[0]) start ***********
28-Nov-2025 07:57:31	*********** Test get release_date[0] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 57 (get release_date[1]) start ***********
28-Nov-2025 07:57:31	*********** Test get release_date[1] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 58 (put/get release_date[0]) start ***********
28-Nov-2025 07:57:31	New value: 4447626518.249618
28-Nov-2025 07:57:31	Read new value: 4447626518.249618
28-Nov-2025 07:57:31	*********** Test put/get release_date[0] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 59 (put/get release_date[1]) start ***********
28-Nov-2025 07:57:31	New value: 4447654133.299631
28-Nov-2025 07:57:31	Read new value: 4447654133.299631
28-Nov-2025 07:57:31	*********** Test put/get release_date[1] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 60 (put/get release_date[2]) start ***********
28-Nov-2025 07:57:31	New value: 4447653535.139608
28-Nov-2025 07:57:31	Read new value: 4447653535.139608
28-Nov-2025 07:57:31	*********** Test put/get release_date[2] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 61 (put/get release_date[3]) start ***********
28-Nov-2025 07:57:31	New value: 4447654133.299631
28-Nov-2025 07:57:31	Read new value: 4447654133.299631
28-Nov-2025 07:57:31	*********** Test put/get release_date[3] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 62 (put/get release_date[4]) start ***********
28-Nov-2025 07:57:31	New value: 4447653535.139608
28-Nov-2025 07:57:31	Read new value: 4447653535.139608
28-Nov-2025 07:57:31	*********** Test put/get release_date[4] OK ***********
28-Nov-2025 07:57:31	List value of schedule: ({'r1': False, 'r2': array([], shape=(0, 1), dtype='<U5'), 'r3': array([], shape=(0, 1), dtype='<U5'), 'r4': array([], shape=(0, 1), dtype='<U5'), 'r5': array([], shape=(0, 1), dtype='<U5')}, {})
28-Nov-2025 07:57:31	Read value: ({'r1': False, 'r2': array([], shape=(0, 1), dtype='<U5'), 'r3': array([], shape=(0, 1), dtype='<U5'), 'r4': array([], shape=(0, 1), dtype='<U5'), 'r5': array([], shape=(0, 1), dtype='<U5')}, {})
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 63 (get schedule[0]) start ***********
28-Nov-2025 07:57:31	*********** Test get schedule[0] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 64 (get schedule[1]) start ***********
28-Nov-2025 07:57:31	*********** Test get schedule[1] OK ***********
28-Nov-2025 07:57:31	schedule is probably a column with variable length arrays, don't try to write that
28-Nov-2025 07:57:31	List value of schedule_type: (array(['', '', '', '', ''], dtype='<U5'), {})
28-Nov-2025 07:57:31	Read value: (array(['', '', '', '', ''], dtype='<U5'), {})
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 65 (get schedule_type[0]) start ***********
28-Nov-2025 07:57:31	*********** Test get schedule_type[0] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 66 (get schedule_type[1]) start ***********
28-Nov-2025 07:57:31	*********** Test get schedule_type[1] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 67 (put/get schedule_type[0]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_
28-Nov-2025 07:57:31	Read new value: the_coolest_
28-Nov-2025 07:57:31	*********** Test put/get schedule_type[0] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 68 (put/get schedule_type[1]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_
28-Nov-2025 07:57:31	Read new value: the_coolest_
28-Nov-2025 07:57:31	*********** Test put/get schedule_type[1] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 69 (put/get schedule_type[2]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_
28-Nov-2025 07:57:31	Read new value: the_coolest_
28-Nov-2025 07:57:31	*********** Test put/get schedule_type[2] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 70 (put/get schedule_type[3]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_
28-Nov-2025 07:57:31	Read new value: the_coolest_
28-Nov-2025 07:57:31	*********** Test put/get schedule_type[3] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 71 (put/get schedule_type[4]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_
28-Nov-2025 07:57:31	Read new value: the_coolest_
28-Nov-2025 07:57:31	*********** Test put/get schedule_type[4] OK ***********
28-Nov-2025 07:57:31	List value of source_name: (array(['3C273', '1310+323', 'NGC4826', '1310+323', 'NGC4826'], dtype='<U8'), {})
28-Nov-2025 07:57:31	Read value: (array(['3C273', '1310+323', 'NGC4826', '1310+323', 'NGC4826'], dtype='<U8'), {})
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 72 (get source_name[0]) start ***********
28-Nov-2025 07:57:31	*********** Test get source_name[0] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 73 (get source_name[1]) start ***********
28-Nov-2025 07:57:31	*********** Test get source_name[1] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 74 (put/get source_name[0]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_3C273
28-Nov-2025 07:57:31	Read new value: the_coolest_3C273
28-Nov-2025 07:57:31	*********** Test put/get source_name[0] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 75 (put/get source_name[1]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_1310+323
28-Nov-2025 07:57:31	Read new value: the_coolest_1310+323
28-Nov-2025 07:57:31	*********** Test put/get source_name[1] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 76 (put/get source_name[2]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_NGC4826
28-Nov-2025 07:57:31	Read new value: the_coolest_NGC4826
28-Nov-2025 07:57:31	*********** Test put/get source_name[2] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 77 (put/get source_name[3]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_1310+323
28-Nov-2025 07:57:31	Read new value: the_coolest_1310+323
28-Nov-2025 07:57:31	*********** Test put/get source_name[3] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 78 (put/get source_name[4]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_NGC4826
28-Nov-2025 07:57:31	Read new value: the_coolest_NGC4826
28-Nov-2025 07:57:31	*********** Test put/get source_name[4] OK ***********
28-Nov-2025 07:57:31	List value of spw_name: (array(['', '', '', '', '', ''], dtype='<U5'), {})
28-Nov-2025 07:57:31	Read value: (array(['', '', '', '', '', ''], dtype='<U5'), {})
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 79 (get spw_name[0]) start ***********
28-Nov-2025 07:57:31	*********** Test get spw_name[0] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 80 (get spw_name[1]) start ***********
28-Nov-2025 07:57:31	*********** Test get spw_name[1] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 81 (put/get spw_name[0]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_
28-Nov-2025 07:57:31	Read new value: the_coolest_
28-Nov-2025 07:57:31	*********** Test put/get spw_name[0] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 82 (put/get spw_name[1]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_
28-Nov-2025 07:57:31	Read new value: the_coolest_
28-Nov-2025 07:57:31	*********** Test put/get spw_name[1] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 83 (put/get spw_name[2]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_
28-Nov-2025 07:57:31	Read new value: the_coolest_
28-Nov-2025 07:57:31	*********** Test put/get spw_name[2] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 84 (put/get spw_name[3]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_
28-Nov-2025 07:57:31	Read new value: the_coolest_
28-Nov-2025 07:57:31	*********** Test put/get spw_name[3] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 85 (put/get spw_name[4]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_
28-Nov-2025 07:57:31	Read new value: the_coolest_
28-Nov-2025 07:57:31	*********** Test put/get spw_name[4] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 86 (put/get spw_name[5]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_
28-Nov-2025 07:57:31	Read new value: the_coolest_
28-Nov-2025 07:57:31	*********** Test put/get spw_name[5] OK ***********
28-Nov-2025 07:57:31	List value of telescope: (array(['BIMA', 'BIMA', 'BIMA', 'BIMA', 'BIMA'], dtype='<U4'), {})
28-Nov-2025 07:57:31	Read value: (array(['BIMA', 'BIMA', 'BIMA', 'BIMA', 'BIMA'], dtype='<U4'), {})
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 87 (get telescope[0]) start ***********
28-Nov-2025 07:57:31	*********** Test get telescope[0] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 88 (get telescope[1]) start ***********
28-Nov-2025 07:57:31	*********** Test get telescope[1] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 89 (put/get telescope[0]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_BIMA
28-Nov-2025 07:57:31	Read new value: the_coolest_BIMA
28-Nov-2025 07:57:31	*********** Test put/get telescope[0] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 90 (put/get telescope[1]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_BIMA
28-Nov-2025 07:57:31	Read new value: the_coolest_BIMA
28-Nov-2025 07:57:31	*********** Test put/get telescope[1] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 91 (put/get telescope[2]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_BIMA
28-Nov-2025 07:57:31	Read new value: the_coolest_BIMA
28-Nov-2025 07:57:31	*********** Test put/get telescope[2] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 92 (put/get telescope[3]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_BIMA
28-Nov-2025 07:57:31	Read new value: the_coolest_BIMA
28-Nov-2025 07:57:31	*********** Test put/get telescope[3] OK ***********
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 93 (put/get telescope[4]) start ***********
28-Nov-2025 07:57:31	New value: the_coolest_BIMA
28-Nov-2025 07:57:31	Read new value: the_coolest_BIMA
28-Nov-2025 07:57:31	*********** Test put/get telescope[4] OK ***********
28-Nov-2025 07:57:31	93/93 tests passed
28-Nov-2025 07:57:31	All tests passed, congratulations!
28-Nov-2025 07:57:31	PASSED
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	test_task_vishead.py::vishead_test::test_getModeDefaultIndex
28-Nov-2025 07:57:31	4. test_getModeDefaultIndex: Check that vishead in get mode returns the entire array of values for a keyword if no hdindex is specified
28-Nov-2025 07:57:31	PASSED
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	test_task_vishead.py::vishead_test::test_getModeSpecifiedIndex
28-Nov-2025 07:57:31	5. test_getModeSpecifiedIndex: Check that vishead in get mode returns a single value for a keyword if an hdindex is specified
28-Nov-2025 07:57:31	PASSED
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	test_task_vishead.py::vishead_test::test_list
28-Nov-2025 07:57:31	Vishead: List mode
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 1 (vishead( 'n4826_16apr98.ms', 'list', [])) start ***********
28-Nov-2025 07:57:31	Original header =
28-Nov-2025 07:57:31	{'cal_grp': (array([0, 0, 0, 0, 0]), {}), 'field': (array(['3C273-F0', '1310+323-F0', 'NGC4826-F0', 'NGC4826-F1',
28-Nov-2025 07:57:31	'NGC4826-F2', 'NGC4826-F3', 'NGC4826-F4', 'NGC4826-F5',
28-Nov-2025 07:57:31	'NGC4826-F6'], dtype='<U11'), {}), 'fld_code': (array(['', '', '', '', '', '', '', '', ''], dtype='<U5'), {}), 'freq_group_name': (array(['SIDEBAND-AVG', 'SIDEBAND-AVG', 'MULTI-CHANNEL-DATA',
28-Nov-2025 07:57:31	'MULTI-CHANNEL-DATA', 'MULTI-CHANNEL-DATA', 'MULTI-CHANNEL-DATA'],
28-Nov-2025 07:57:31	dtype='<U18'), {}), 'log': ({'r1': array([['See HISTORY for BIMA observing log']], dtype='<U34'), 'r2': array([['See HISTORY for BIMA observing log']], dtype='<U34'), 'r3': array([['See HISTORY for BIMA observing log']], dtype='<U34'), 'r4': array([['See HISTORY for BIMA observing log']], dtype='<U34'), 'r5': array([['See HISTORY for BIMA observing log']], dtype='<U34')}, {}), 'observer': (array(['', '', '', '', ''], dtype='<U5'), {}), 'project': (array(['t108c115.n48', 't108c115.n48', 't108c115.n48', 't108c115.n48',
28-Nov-2025 07:57:31	't108c115.n48'], dtype='<U12'), {}), 'ptcs': ({'r1': array([[[-3.01456907]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.03582093]]]), 'r2': array([[[-2.83407554]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.56453539]]]), 'r3': array([[[-2.89402933]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.37847028]]]), 'r4': array([[[-2.89425879]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.37847028]]]), 'r5': array([[[-2.89414422]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.378655 ]]]), 'r6': array([[[-2.89391445]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.378655 ]]]), 'r7': array([[[-2.89379988]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.37847028]]]), 'r8': array([[[-2.89391445]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.37828557]]]), 'r9': array([[[-2.89414422]],
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	[[ 0.37828557]]])}, {'MEASINFO': {'Ref': 'J2000', 'type': 'direction'}, 'QuantumUnits': array(['rad', 'rad'], dtype='<U3')}), 'release_date': (array([4.44762648e+09, 4.44765409e+09, 4.44765349e+09, 4.44765409e+09,
28-Nov-2025 07:57:31	4.44765349e+09]), {'MEASINFO': {'Ref': 'UTC', 'type': 'epoch'}, 'QuantumUnits': array(['s'], dtype='<U1')}), 'schedule': ({'r1': False, 'r2': array([], shape=(0, 1), dtype='<U5'), 'r3': array([], shape=(0, 1), dtype='<U5'), 'r4': array([], shape=(0, 1), dtype='<U5'), 'r5': array([], shape=(0, 1), dtype='<U5')}, {}), 'schedule_type': (array(['', '', '', '', ''], dtype='<U5'), {}), 'source_name': (array(['3C273', '1310+323', 'NGC4826', '1310+323', 'NGC4826'], dtype='<U8'), {}), 'spw_name': (array(['', '', '', '', '', ''], dtype='<U5'), {}), 'telescope': (array(['BIMA', 'BIMA', 'BIMA', 'BIMA', 'BIMA'], dtype='<U4'), {})}
28-Nov-2025 07:57:31	*********** Test vishead( 'n4826_16apr98.ms', 'list', []) OK ***********
28-Nov-2025 07:57:31	PASSED
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	test_task_vishead.py::vishead_test::test_listMode
28-Nov-2025 07:57:31	2. test_listMode: Check that vishead in list mode produces a list in the logger with origin=vishead and as output as a Python array
28-Nov-2025 07:57:31	PASSED
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	test_task_vishead.py::vishead_test::test_putMode
28-Nov-2025 07:57:31	6. test_putMode: Check that vishead in put mode changes the value of a keyword
28-Nov-2025 07:57:31	PASSED
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	test_task_vishead.py::vishead_test::test_summary
28-Nov-2025 07:57:31	Vishead: Summary mode
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	*********** Test 1 (summary) start ***********
28-Nov-2025 07:57:31	*********** Test summary OK ***********
28-Nov-2025 07:57:31	PASSED
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	test_task_vishead.py::vishead_test::test_summaryMode
28-Nov-2025 07:57:31	3. test_summaryMode: Check that vishead in summary mode produces output in the logger with origin=summary
28-Nov-2025 07:57:31	PASSED
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	test_task_vishead.py::vishead_test::test_takesMeasurementSet
28-Nov-2025 07:57:31	1. test_takesMeasurementSet: Check that vishead takes a MeasurementSet (*.ms)
28-Nov-2025 07:57:31	PASSED
28-Nov-2025 07:57:31
28-Nov-2025 07:57:31	- generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_vishead/nose.xml -
28-Nov-2025 07:57:31	========================= 9 passed, 1 warning in 3.97s =========================
28-Nov-2025 07:57:32	============================= test session starts ==============================
28-Nov-2025 07:57:32	platform darwin -- Python 3.12.8, pytest-9.0.1, pluggy-1.6.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6testenv/bin/python3.12
28-Nov-2025 07:57:32	cachedir: .pytest_cache
28-Nov-2025 07:57:32	rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_initweights
28-Nov-2025 07:57:32	configfile: pytest.ini
28-Nov-2025 07:57:35	collecting ... initweights tests will use data from /opt/casa/data/casatestdata/unittest/initweights/
28-Nov-2025 07:57:35	collected 35 items
28-Nov-2025 07:57:35
28-Nov-2025 07:57:35
28-Nov-2025 07:57:35	test_task_initweights.py::initweights_tsys_base::testTinttsysLC The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 9 10 11 12 13 14 15 16
28-Nov-2025 07:57:35	2025-11-28 12:57:35 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth, integration time, and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:35
28-Nov-2025 07:57:35	Test wtmode='tinttsys', interp='linear,cspline'
28-Nov-2025 07:57:35	PASSED
28-Nov-2025 07:57:35
28-Nov-2025 07:57:35	test_task_initweights.py::initweights_tsys_base::testTinttsysLCSp The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 9 10 11 12 13 14 15 16
28-Nov-2025 07:57:35	2025-11-28 12:57:35 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth, integration time, and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:35
28-Nov-2025 07:57:35	Test wtmode='tinttsys', interp='linear,cspline', dowtsp=True
28-Nov-2025 07:57:35	PASSED
28-Nov-2025 07:57:35
28-Nov-2025 07:57:35	test_task_initweights.py::initweights_tsys_base::testTinttsysLL The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 9 10 11 12 13 14 15 16
28-Nov-2025 07:57:35	2025-11-28 12:57:36 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth, integration time, and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:35
28-Nov-2025 07:57:35	Test wtmode='tinttsys', interp='linear,linear'
28-Nov-2025 07:57:35	PASSED
28-Nov-2025 07:57:35
28-Nov-2025 07:57:35	test_task_initweights.py::initweights_tsys_base::testTinttsysLLSp The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 9 10 11 12 13 14 15 16
28-Nov-2025 07:57:35	2025-11-28 12:57:36 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth, integration time, and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:35
28-Nov-2025 07:57:35	Test wtmode='tinttsys', interp='linear,linear', dowtsp=True
28-Nov-2025 07:57:35	PASSED
28-Nov-2025 07:57:35
28-Nov-2025 07:57:35	test_task_initweights.py::initweights_tsys_base::testTinttsysNN The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 9 10 11 12 13 14 15 16
28-Nov-2025 07:57:35	2025-11-28 12:57:36 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth, integration time, and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:35
28-Nov-2025 07:57:35	Test wtmode='tinttsys', interp='nearest,nearest'
28-Nov-2025 07:57:35	PASSED
28-Nov-2025 07:57:35
28-Nov-2025 07:57:35	test_task_initweights.py::initweights_tsys_base::testTinttsysNNSp The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 9 10 11 12 13 14 15 16
28-Nov-2025 07:57:35	2025-11-28 12:57:36 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth, integration time, and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:36
28-Nov-2025 07:57:36	Test wtmode='tinttsys', interp='nearest,nearest', dowtsp=True
28-Nov-2025 07:57:36	PASSED
28-Nov-2025 07:57:36
28-Nov-2025 07:57:36	test_task_initweights.py::initweights_tsys_base::testTsysLC The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 9 10 11 12 13 14 15 16
28-Nov-2025 07:57:36	2025-11-28 12:57:36 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:36
28-Nov-2025 07:57:36	Test wtmode='tsys', interp='linear,cspline'
28-Nov-2025 07:57:36	PASSED
28-Nov-2025 07:57:36
28-Nov-2025 07:57:36	test_task_initweights.py::initweights_tsys_base::testTsysLCSp The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 9 10 11 12 13 14 15 16
28-Nov-2025 07:57:36	2025-11-28 12:57:36 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:36
28-Nov-2025 07:57:36	Test wtmode='tsys', interp='linear,cspline', dowtsp=True
28-Nov-2025 07:57:36	PASSED
28-Nov-2025 07:57:36
28-Nov-2025 07:57:36	test_task_initweights.py::initweights_tsys_base::testTsysLL The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 9 10 11 12 13 14 15 16
28-Nov-2025 07:57:36	2025-11-28 12:57:36 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:36
28-Nov-2025 07:57:36	Test wtmode='tsys', interp='linear,linear'
28-Nov-2025 07:57:36	PASSED
28-Nov-2025 07:57:36
28-Nov-2025 07:57:36	test_task_initweights.py::initweights_tsys_base::testTsysLLSp The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 9 10 11 12 13 14 15 16
28-Nov-2025 07:57:36	2025-11-28 12:57:37 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:36
28-Nov-2025 07:57:36	Test wtmode='tsys', interp='linear,linear', dowtsp=True
28-Nov-2025 07:57:36	PASSED
28-Nov-2025 07:57:36
28-Nov-2025 07:57:36	test_task_initweights.py::initweights_tsys_base::testTsysNN The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 9 10 11 12 13 14 15 16
28-Nov-2025 07:57:36	2025-11-28 12:57:37 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:36
28-Nov-2025 07:57:36	Test wtmode='tsys', interp='nearest,nearest'
28-Nov-2025 07:57:36	PASSED
28-Nov-2025 07:57:36
28-Nov-2025 07:57:36	test_task_initweights.py::initweights_tsys_base::testTsysNNSp The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 9 10 11 12 13 14 15 16
28-Nov-2025 07:57:36	2025-11-28 12:57:37 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:37
28-Nov-2025 07:57:37	Test wtmode='tsys', interp='nearest,nearest', dowtsp=True
28-Nov-2025 07:57:37	PASSED
28-Nov-2025 07:57:37
28-Nov-2025 07:57:37	test_task_initweights.py::initweights_tsys_map::testTinttsysMapLC The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 10 12 14 16
28-Nov-2025 07:57:37	2025-11-28 12:57:37 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth, integration time, and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:37
28-Nov-2025 07:57:37	Test spwmap wtmode='tinttsys', interp='linear,cspline'
28-Nov-2025 07:57:37	PASSED
28-Nov-2025 07:57:37
28-Nov-2025 07:57:37	test_task_initweights.py::initweights_tsys_map::testTinttsysMapLCSp The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 10 12 14 16
28-Nov-2025 07:57:37	2025-11-28 12:57:37 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth, integration time, and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:37
28-Nov-2025 07:57:37	Test spwmap wtmode='tinttsys', interp='linear,cspline', dowtsp=True
28-Nov-2025 07:57:37	PASSED
28-Nov-2025 07:57:37
28-Nov-2025 07:57:37	test_task_initweights.py::initweights_tsys_map::testTinttsysMapLL The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 10 12 14 16
28-Nov-2025 07:57:37	2025-11-28 12:57:37 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth, integration time, and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:37
28-Nov-2025 07:57:37	Test spwmap wtmode='tinttsys', interp='linear,linear'
28-Nov-2025 07:57:37	PASSED
28-Nov-2025 07:57:37
28-Nov-2025 07:57:37	test_task_initweights.py::initweights_tsys_map::testTinttsysMapLLSp The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 10 12 14 16
28-Nov-2025 07:57:37	2025-11-28 12:57:38 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth, integration time, and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:37
28-Nov-2025 07:57:37	Test spwmap wtmode='tinttsys', interp='linear,linear', dowtsp=True
28-Nov-2025 07:57:37	PASSED
28-Nov-2025 07:57:37
28-Nov-2025 07:57:37	test_task_initweights.py::initweights_tsys_map::testTinttsysMapNN The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 10 12 14 16
28-Nov-2025 07:57:37	2025-11-28 12:57:38 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth, integration time, and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:37
28-Nov-2025 07:57:37	Test spwmap wtmode='tinttsys', interp='nearest,nearest'
28-Nov-2025 07:57:37	PASSED
28-Nov-2025 07:57:37
28-Nov-2025 07:57:37	test_task_initweights.py::initweights_tsys_map::testTinttsysMapNNSp The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 10 12 14 16
28-Nov-2025 07:57:37	2025-11-28 12:57:38 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth, integration time, and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:38
28-Nov-2025 07:57:38	Test spwmap wtmode='tinttsys', interp='nearest,nearest', dowtsp=True
28-Nov-2025 07:57:38	PASSED
28-Nov-2025 07:57:38
28-Nov-2025 07:57:38	test_task_initweights.py::initweights_tsys_map::testTsysMapLC The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 10 12 14 16
28-Nov-2025 07:57:38	2025-11-28 12:57:38 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:38
28-Nov-2025 07:57:38	Test spwmap wtmode='tsys', interp='linear,cspline'
28-Nov-2025 07:57:38	PASSED
28-Nov-2025 07:57:38
28-Nov-2025 07:57:38	test_task_initweights.py::initweights_tsys_map::testTsysMapLCSp The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 10 12 14 16
28-Nov-2025 07:57:38	2025-11-28 12:57:38 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:38
28-Nov-2025 07:57:38	Test spwmap wtmode='tsys', interp='linear,cspline', dowtsp=True
28-Nov-2025 07:57:38	PASSED
28-Nov-2025 07:57:38
28-Nov-2025 07:57:38	test_task_initweights.py::initweights_tsys_map::testTsysMapLL The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 10 12 14 16
28-Nov-2025 07:57:38	2025-11-28 12:57:38 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:38
28-Nov-2025 07:57:38	Test spwmap wtmode='tsys', interp='linear,linear'
28-Nov-2025 07:57:38	PASSED
28-Nov-2025 07:57:38
28-Nov-2025 07:57:38	test_task_initweights.py::initweights_tsys_map::testTsysMapLLSp The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 10 12 14 16
28-Nov-2025 07:57:38	2025-11-28 12:57:39 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:38
28-Nov-2025 07:57:38	Test spwmap wtmode='tsys', interp='linear,linear', dowtsp=True
28-Nov-2025 07:57:38	PASSED
28-Nov-2025 07:57:38
28-Nov-2025 07:57:38	test_task_initweights.py::initweights_tsys_map::testTsysMapNN The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 10 12 14 16
28-Nov-2025 07:57:38	2025-11-28 12:57:39 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:38
28-Nov-2025 07:57:38	Test spwmap wtmode='tsys', interp='nearest,nearest'
28-Nov-2025 07:57:38	PASSED
28-Nov-2025 07:57:38
28-Nov-2025 07:57:38	test_task_initweights.py::initweights_tsys_map::testTsysMapNNSp The following MS spws have no corresponding cal spws in tsysweight_ave.tsys.cal: 0 2 4 6 8 10 12 14 16
28-Nov-2025 07:57:38	2025-11-28 12:57:39 WARN initweights::Calibrater::selectvis Initializing SIGMA and WEIGHT according to channel bandwidth and Tsys. NOTE this is an expert mode.
28-Nov-2025 07:57:39
28-Nov-2025 07:57:39	Test spwmap wtmode='tsys', interp='nearest,nearest', dowtsp=True
28-Nov-2025 07:57:39	PASSED
28-Nov-2025 07:57:39
28-Nov-2025 07:57:39	test_task_initweights.py::initweights_base::testNyq
28-Nov-2025 07:57:39	Test wtmode='nyq', dowtsp=F
28-Nov-2025 07:57:39	PASSED
28-Nov-2025 07:57:39
28-Nov-2025 07:57:39	test_task_initweights.py::initweights_base::testNyqSp
28-Nov-2025 07:57:39	Test wtmode='nyq', dowtsp=T
28-Nov-2025 07:57:39	PASSED
28-Nov-2025 07:57:39
28-Nov-2025 07:57:39	test_task_initweights.py::initweights_base::testOnes
28-Nov-2025 07:57:39	Test wtmode='ones', dowtsp=F
28-Nov-2025 07:57:39	PASSED
28-Nov-2025 07:57:39
28-Nov-2025 07:57:39	test_task_initweights.py::initweights_base::testOnesSp
28-Nov-2025 07:57:39	Test wtmode='ones', dowtsp=T
28-Nov-2025 07:57:39	PASSED
28-Nov-2025 07:57:39
28-Nov-2025 07:57:39	test_task_initweights.py::initweights_base::testSigma
28-Nov-2025 07:57:39	Test wtmode='sigma', dowtsp=F
28-Nov-2025 07:57:39	PASSED
28-Nov-2025 07:57:39
28-Nov-2025 07:57:40	test_task_initweights.py::initweights_base::testSigmaSp
28-Nov-2025 07:57:40	Test wtmode='sigma', dowtsp=T
28-Nov-2025 07:57:40	PASSED
28-Nov-2025 07:57:40
28-Nov-2025 07:57:40	test_task_initweights.py::initweights_base::testWeightSp
28-Nov-2025 07:57:40	Test wtmode='weight', dowtsp=T
28-Nov-2025 07:57:40	PASSED
28-Nov-2025 07:57:40
28-Nov-2025 07:57:40	test_task_initweights.py::initweights_delspcol::testDelsigsp
28-Nov-2025 07:57:40	Test wtmode='delsigsp', dowtsp=F
28-Nov-2025 07:57:40	PASSED
28-Nov-2025 07:57:40
28-Nov-2025 07:57:40	test_task_initweights.py::initweights_delspcol::testDelsigspSp
28-Nov-2025 07:57:40	Test wtmode='delsigsp', dowtsp=T
28-Nov-2025 07:57:40	PASSED
28-Nov-2025 07:57:40
28-Nov-2025 07:57:40	test_task_initweights.py::initweights_delspcol::testDelwtsp
28-Nov-2025 07:57:40	Test wtmode='delwtsp', dowtsp=F
28-Nov-2025 07:57:40	PASSED
28-Nov-2025 07:57:40
28-Nov-2025 07:57:40	test_task_initweights.py::initweights_delspcol::testDelwtspSp
28-Nov-2025 07:57:40	Test wtmode='delwtsp', dowtsp=T
28-Nov-2025 07:57:41	PASSED
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	- generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_initweights/nose.xml -
28-Nov-2025 07:57:41	======================== 35 passed, 1 warning in 8.90s =========================
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_fringefit/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_fringefit
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_fringefit/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_fringefit/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_listobs/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_listobs
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_listobs/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_listobs/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_concat/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_concat
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_concat/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_concat/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_sdtimeaverage/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_sdtimeaverage
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_sdtimeaverage/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_sdtimeaverage/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_listfits/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_listfits
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_listfits/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_listfits/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_rmfit/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_rmfit
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_rmfit/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_rmfit/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_immoments/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_immoments
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_immoments/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_immoments/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_polfromgain/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_polfromgain
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_polfromgain/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_polfromgain/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_importfitsidi/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_importfitsidi
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_importfitsidi/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_importfitsidi/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_split/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_split
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_split/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_split/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_imcollapse/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_imcollapse
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_imcollapse/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_imcollapse/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_imsubimage/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_imsubimage
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_imsubimage/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_imsubimage/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_plotbandpass/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_plotbandpass
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_plotbandpass/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_plotbandpass/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_delmod/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_delmod
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_delmod/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_delmod/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_imrebin/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_imrebin
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_imrebin/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_imrebin/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_immath/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_immath
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_immath/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_immath/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_smoothcal/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_smoothcal
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_smoothcal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_smoothcal/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_exportasdm/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_exportasdm
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_exportasdm/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_exportasdm/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_getantposalma/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_getantposalma
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_getantposalma/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_getantposalma/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_vishead/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_vishead
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_vishead/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_vishead/
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_initweights/
28-Nov-2025 07:57:41	Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_initweights
28-Nov-2025 07:57:41
28-Nov-2025 07:57:41	Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/xml/test_task_initweights/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14/casa6/casatestutils/nosedir/test_task_initweights/
28-Nov-2025 07:57:41	Finished task 'Test wheel' with result: Success
28-Nov-2025 07:57:41	Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit'
28-Nov-2025 07:57:41	Parsing test results under /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-PR131-TTA14...
28-Nov-2025 07:57:41	Finished task 'Parse tests' with result: Success
28-Nov-2025 07:57:41	Running post build plugin 'Docker Container Cleanup'
28-Nov-2025 07:57:41	Running post build plugin 'NCover Results Collector'
28-Nov-2025 07:57:41	Running post build plugin 'Build Results Label Collector'
28-Nov-2025 07:57:41	Running post build plugin 'Clover Results Collector'
28-Nov-2025 07:57:41	Running post build plugin 'npm Cache Cleanup'
28-Nov-2025 07:57:41	Running post build plugin 'Artifact Copier'
28-Nov-2025 07:57:41	Publishing an artifact: OSX10.14 casatasks wheel
28-Nov-2025 07:57:41	Finished publishing of artifact Non required job artifact Http Compression On : [OSX10.14 casatasks wheel], patterns: [casatasks*.whl] anchored at: [wheeldirectory/] in 192.9 ms
28-Nov-2025 07:57:41	Finalising the build...
28-Nov-2025 07:57:41	Stopping timer.
28-Nov-2025 07:57:41	Build CASASPECS-PR131-TTA14-11 completed.
28-Nov-2025 07:57:41	Running on server: post build plugin 'Build Hanging Detection Configuration'
28-Nov-2025 07:57:41	Running on server: post build plugin 'NCover Results Collector'
28-Nov-2025 07:57:41	Running on server: post build plugin 'Build Labeller'
28-Nov-2025 07:57:41	Running on server: post build plugin 'Clover Delta Calculator'
28-Nov-2025 07:57:41	Running on server: post build plugin 'Maven Dependencies Postprocessor'
28-Nov-2025 07:57:41	All post build plugins have finished
28-Nov-2025 07:57:41	Generating build results summary...
28-Nov-2025 07:57:42	Saving build results to disk...
28-Nov-2025 07:57:43	Store variable context...
28-Nov-2025 07:57:43	Finished building CASASPECS-PR131-TTA14-11.

Build: #11 was successful

Job: Test Tasks macOS15 was successful

Stages & jobs

Create Casalith

Test PR

Build log

Build #11

Build: #11 was successful

Job: Test Tasks macOS15 was successful

Stages & jobs

Create Casalith

Test PR

Build log