Build: #2 failed
Job: Test Tasks macOS 15 Py3.12 failed
Build log
The build generated 20,679 lines of output. The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
| 05-Dec-2025 11:48:47 | ----------------- |
| 05-Dec-2025 11:48:47 | |
| 05-Dec-2025 11:48:47 | Check that pre applying the T table results in the regular G table calibration |
| 05-Dec-2025 11:48:47 | PASSED |
| 05-Dec-2025 11:48:47 | |
| 05-Dec-2025 11:48:52 | test_task_gaincal.py::gaincal_test::test_preboth |
| 05-Dec-2025 11:48:52 | test_preboth |
| 05-Dec-2025 11:48:52 | -------------- |
| 05-Dec-2025 11:48:52 | |
| 05-Dec-2025 11:48:52 | Check that when preapplying both then gaintype T increases the SNR |
| 05-Dec-2025 11:48:52 | PASSED |
| 05-Dec-2025 11:48:52 | |
| 05-Dec-2025 11:48:54 | test_task_gaincal.py::gaincal_test::test_refantDiff |
| 05-Dec-2025 11:48:54 | test_refantDiff |
| 05-Dec-2025 11:48:54 | ----------------- |
| 05-Dec-2025 11:48:54 | |
| 05-Dec-2025 11:48:54 | Check that selecting refant will cause that refant to be set at 0 |
| 05-Dec-2025 11:48:54 | PASSED |
| 05-Dec-2025 11:48:54 | |
| 05-Dec-2025 11:48:55 | test_task_gaincal.py::gaincal_test::test_refantSelect |
| 05-Dec-2025 11:48:55 | test_refantSelect |
| 05-Dec-2025 11:48:55 | ------------------- |
| 05-Dec-2025 11:48:55 | |
| 05-Dec-2025 11:48:55 | Check that the refant selection functions properly |
| 05-Dec-2025 11:48:55 | PASSED |
| 05-Dec-2025 11:48:55 | |
| 05-Dec-2025 11:48:55 | test_task_gaincal.py::gaincal_test::test_scanSelect |
| 05-Dec-2025 11:48:55 | test_scanSelect |
| 05-Dec-2025 11:48:55 | ----------------- |
| 05-Dec-2025 11:48:55 | |
| 05-Dec-2025 11:48:55 | Check that the scan selection functions properly |
| 05-Dec-2025 11:48:55 | PASSED |
| 05-Dec-2025 11:48:55 | |
| 05-Dec-2025 11:48:57 | 2025-12-05 16:48:57 SEVERE getcol::WEIGHT Exception Reported: Table DataManager error: Invalid operation: SSMIndColumn::getShape: no array in row 0 in column WEIGHT of table /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_gaincal/temp.cal |
| 05-Dec-2025 11:48:57 | 2025-12-05 16:48:57 SEVERE getcol::WEIGHT Exception Reported: Table DataManager error: Invalid operation: SSMIndColumn::getShape: no array in row 0 in column WEIGHT of table /opt/casa/data/casatestdata/unittest/gaincal/spwMap.G0 |
| 05-Dec-2025 11:48:58 | test_task_gaincal.py::gaincal_test::test_spwMap The following MS spws have no corresponding cal spws in testspwmap.G2: 2 3 |
| 05-Dec-2025 11:48:58 | |
| 05-Dec-2025 11:48:58 | test_spwMap |
| 05-Dec-2025 11:48:58 | ------------- |
| 05-Dec-2025 11:48:58 | |
| 05-Dec-2025 11:48:58 | Check that the output with spwMap matches to a reference calibration table |
| 05-Dec-2025 11:48:58 | PASSED |
| 05-Dec-2025 11:48:58 | |
| 05-Dec-2025 11:48:58 | test_task_gaincal.py::gaincal_test::test_spwSelect |
| 05-Dec-2025 11:48:58 | test_spwSelect |
| 05-Dec-2025 11:48:58 | ---------------- |
| 05-Dec-2025 11:48:58 | |
| 05-Dec-2025 11:48:58 | Check that the spw selection parameter functions properly |
| 05-Dec-2025 11:48:58 | PASSED |
| 05-Dec-2025 11:48:58 | |
| 05-Dec-2025 11:48:59 | test_task_gaincal.py::gaincal_test::test_uvrangeSelect |
| 05-Dec-2025 11:48:59 | Check that using the uv range parameter you can cut off specific antennas |
| 05-Dec-2025 11:48:59 | PASSED |
| 05-Dec-2025 11:48:59 | |
| 05-Dec-2025 11:48:59 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_gaincal/nose.xml - |
| 05-Dec-2025 11:48:59 | =================== 34 passed, 1 warning in 92.63s (0:01:32) =================== |
| 05-Dec-2025 11:48:59 | ============================= test session starts ============================== |
| 05-Dec-2025 11:48:59 | platform darwin -- Python 3.12.8, pytest-9.0.1, pluggy-1.6.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6testenv/bin/python |
| 05-Dec-2025 11:48:59 | cachedir: .pytest_cache |
| 05-Dec-2025 11:48:59 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_polcal |
| 05-Dec-2025 11:48:59 | configfile: pytest.ini |
| 05-Dec-2025 11:49:02 | collecting ... collected 29 items |
| 05-Dec-2025 11:49:02 | |
| 05-Dec-2025 11:49:02 | |
| 05-Dec-2025 11:49:03 | 2025-12-05 16:49:03 SEVERE MeasTable::dUTC(Double) (file ../../measures/Measures/MeasTable.cc, line 4290) Leap second table TAI_UTC seems out-of-date. |
| 05-Dec-2025 11:49:03 | 2025-12-05 16:49:03 SEVERE MeasTable::dUTC(Double) (file ../../measures/Measures/MeasTable.cc, line 4290)+ Until the table is updated (see the CASA documentation or your system admin), |
| 05-Dec-2025 11:49:03 | 2025-12-05 16:49:03 SEVERE MeasTable::dUTC(Double) (file ../../measures/Measures/MeasTable.cc, line 4290)+ times and coordinates derived from UTC could be wrong by 1s or more. |
| 05-Dec-2025 11:49:03 | test_task_polcal.py::polcal_test::test_PosAngAlternateQUCirc |
| 05-Dec-2025 11:49:03 | Test poltype PosAng and assume alternate Q, U values |
| 05-Dec-2025 11:49:03 | PASSED |
| 05-Dec-2025 11:49:03 | |
| 05-Dec-2025 11:49:04 | test_task_polcal.py::polcal_test::test_PosAngCorrectQUCirc |
| 05-Dec-2025 11:49:04 | Test poltype PosAng and assume the correct Q, U |
| 05-Dec-2025 11:49:04 | PASSED |
| 05-Dec-2025 11:49:04 | |
| 05-Dec-2025 11:49:05 | test_task_polcal.py::polcal_test::test_PosAngNegatedQUApplyCirc |
| 05-Dec-2025 11:49:05 | Test applying the negated table to a new polcal call |
| 05-Dec-2025 11:49:05 | PASSED |
| 05-Dec-2025 11:49:05 | |
| 05-Dec-2025 11:49:05 | test_task_polcal.py::polcal_test::test_PosAngNegatedQUCirc |
| 05-Dec-2025 11:49:05 | Test poltype PosAng and assume Q, U with flipped signs |
| 05-Dec-2025 11:49:05 | PASSED |
| 05-Dec-2025 11:49:05 | |
| 05-Dec-2025 11:49:06 | test_task_polcal.py::polcal_test::test_XfAlternateQUCirc |
| 05-Dec-2025 11:49:06 | Test poltype Xf and assume alternate Q, U values |
| 05-Dec-2025 11:49:06 | PASSED |
| 05-Dec-2025 11:49:06 | |
| 05-Dec-2025 11:49:07 | test_task_polcal.py::polcal_test::test_XfCorrectQUCirc |
| 05-Dec-2025 11:49:07 | Test poltype Xf and assume the correct Q, U |
| 05-Dec-2025 11:49:07 | PASSED |
| 05-Dec-2025 11:49:07 | |
| 05-Dec-2025 11:49:07 | test_task_polcal.py::polcal_test::test_XfNegatedQUCirc |
| 05-Dec-2025 11:49:07 | Test poltype Xf and assume Q, U with flipped signs |
| 05-Dec-2025 11:49:07 | PASSED |
| 05-Dec-2025 11:49:07 | |
| 05-Dec-2025 11:49:08 | test_task_polcal.py::polcal_test::test_XfParangQUAlternateQUCirc |
| 05-Dec-2025 11:49:08 | Test poltype XfParang+QU and assume the correct Q, U |
| 05-Dec-2025 11:49:08 | PASSED |
| 05-Dec-2025 11:49:08 | |
| 05-Dec-2025 11:49:08 | test_task_polcal.py::polcal_test::test_XfParangQUCorrectQUCirc |
| 05-Dec-2025 11:49:08 | Test poltype XfParang+QU and assume the correct Q, U |
| 05-Dec-2025 11:49:08 | PASSED |
| 05-Dec-2025 11:49:08 | |
| 05-Dec-2025 11:49:09 | test_task_polcal.py::polcal_test::test_XfParangQUNegatedQUApplyCirc |
| 05-Dec-2025 11:49:09 | Test applying the negated table to a new polcal call |
| 05-Dec-2025 11:49:09 | PASSED |
| 05-Dec-2025 11:49:09 | |
| 05-Dec-2025 11:49:10 | test_task_polcal.py::polcal_test::test_XfParangQUNegatedQUCirc |
| 05-Dec-2025 11:49:10 | Test poltype XfParang+QU and assume Q, U with flipped signs |
| 05-Dec-2025 11:49:10 | PASSED |
| 05-Dec-2025 11:49:10 | |
| 05-Dec-2025 11:49:11 | test_task_polcal.py::polcal_test::test_combineSpwLin |
| 05-Dec-2025 11:49:11 | Test that combine spws increases the SNR/ decreases the noise |
| 05-Dec-2025 11:49:11 | (2, 1, 20) |
| 05-Dec-2025 11:49:11 | PASSED |
| 05-Dec-2025 11:49:11 | |
| 05-Dec-2025 11:49:12 | test_task_polcal.py::polcal_test::test_knownPolDfllsCirc |
| 05-Dec-2025 11:49:12 | Test polarized calibration with known polarization for Dflls mode |
| 05-Dec-2025 11:49:12 | PASSED |
| 05-Dec-2025 11:49:12 | |
| 05-Dec-2025 11:49:12 | test_task_polcal.py::polcal_test::test_noPolDfllsLin |
| 05-Dec-2025 11:49:12 | Test on field 0 and spw 0. Use channelized solutions |
| 05-Dec-2025 11:49:12 | PASSED |
| 05-Dec-2025 11:49:12 | |
| 05-Dec-2025 11:49:12 | test_task_polcal.py::polcal_test::test_noPolDllsLin |
| 05-Dec-2025 11:49:12 | Test on Field 0 and spw 0 there should be no source or instrumental pol. This is probably not a useful case |
| 05-Dec-2025 11:49:12 | PASSED |
| 05-Dec-2025 11:49:12 | |
| 05-Dec-2025 11:49:12 | test_task_polcal.py::polcal_test::test_noSourceInstPolNoiseLin |
| 05-Dec-2025 11:49:12 | Test on Field 0 and spw 2 or 3. Should just see noise |
| 05-Dec-2025 11:49:12 | PASSED |
| 05-Dec-2025 11:49:12 | |
| 05-Dec-2025 11:49:13 | test_task_polcal.py::polcal_test::test_onlyInstPolDfllsLin |
| 05-Dec-2025 11:49:13 | Test on Field 0 and spw 1. Use channelized solutions |
| 05-Dec-2025 11:49:13 | PASSED |
| 05-Dec-2025 11:49:13 | |
| 05-Dec-2025 11:49:13 | test_task_polcal.py::polcal_test::test_onlyInstPolDllsLin |
| 05-Dec-2025 11:49:13 | Test on Field 0 and spw 1. Should clear inst pol and see no source pol. needs refant |
| 05-Dec-2025 11:49:13 | PASSED |
| 05-Dec-2025 11:49:13 | |
| 05-Dec-2025 11:49:13 | test_task_polcal.py::polcal_test::test_poltypeXfLin |
| 05-Dec-2025 11:49:13 | Test poltype Xf and assume correct and negated QU |
| 05-Dec-2025 11:49:13 | PASSED |
| 05-Dec-2025 11:49:13 | |
| 05-Dec-2025 11:49:13 | test_task_polcal.py::polcal_test::test_poltypeXfParangQULin |
| 05-Dec-2025 11:49:13 | Test poltypeXfParang+QU and assume the correct QU |
| 05-Dec-2025 11:49:13 | PASSED |
| 05-Dec-2025 11:49:13 | |
| 05-Dec-2025 11:49:14 | test_task_polcal.py::polcal_test::test_posAngLin |
| 05-Dec-2025 11:49:14 | Test poltype PosAng and assume the correct QU |
| 05-Dec-2025 11:49:14 | PASSED |
| 05-Dec-2025 11:49:14 | |
| 05-Dec-2025 11:49:14 | test_task_polcal.py::polcal_test::test_sourceInstPolDfllsLin |
| 05-Dec-2025 11:49:14 | Test on Field 1 and spw 1. Use channelized solutions |
| 05-Dec-2025 11:49:14 | PASSED |
| 05-Dec-2025 11:49:14 | |
| 05-Dec-2025 11:49:14 | test_task_polcal.py::polcal_test::test_sourceInstPolDllsLin |
| 05-Dec-2025 11:49:14 | Test on Field 1 and spw 1. Should see source pol |
| 05-Dec-2025 11:49:14 | PASSED |
| 05-Dec-2025 11:49:14 | |
| 05-Dec-2025 11:49:15 | test_task_polcal.py::polcal_test::test_sourceInstPolNoiseLin |
| 05-Dec-2025 11:49:15 | Test on Field 1 and spw 2 or 3. Should see source pol with noise |
| 05-Dec-2025 11:49:15 | PASSED |
| 05-Dec-2025 11:49:15 | |
| 05-Dec-2025 11:49:15 | test_task_polcal.py::polcal_test::test_sourcePolDfllsLin |
| 05-Dec-2025 11:49:15 | Test one Field 1 and spw 0. Channelized solution |
| 05-Dec-2025 11:49:15 | PASSED |
| 05-Dec-2025 11:49:15 | |
| 05-Dec-2025 11:49:15 | test_task_polcal.py::polcal_test::test_sourcePolDllsLin |
| 05-Dec-2025 11:49:15 | Test on Field 1 and spw 0. Should return the source pol |
| 05-Dec-2025 11:49:15 | PASSED |
| 05-Dec-2025 11:49:15 | |
| 05-Dec-2025 11:49:16 | test_task_polcal.py::polcal_test::test_unknownPolDfQUCirc |
| 05-Dec-2025 11:49:16 | Test polarized calibration with unknown polarization for Df+QU mode |
| 05-Dec-2025 11:49:16 | PASSED |
| 05-Dec-2025 11:49:16 | |
| 05-Dec-2025 11:49:17 | test_task_polcal.py::polcal_test::test_unpolarizedDfCirc |
| 05-Dec-2025 11:49:17 | Test unpolarized calibration Q=U=0 for Df mode |
| 05-Dec-2025 11:49:17 | PASSED |
| 05-Dec-2025 11:49:17 | |
| 05-Dec-2025 11:49:18 | test_task_polcal.py::polcal_test::test_unpolarizedDfQUCirc |
| 05-Dec-2025 11:49:18 | Test unpolarized calibraion Q=U=0 for Df+QU mode |
| 05-Dec-2025 11:49:18 | PASSED |
| 05-Dec-2025 11:49:18 | |
| 05-Dec-2025 11:49:18 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_polcal/nose.xml - |
| 05-Dec-2025 11:49:18 | ======================== 29 passed, 1 warning in 18.46s ======================== |
| 05-Dec-2025 11:49:18 | ============================= test session starts ============================== |
| 05-Dec-2025 11:49:18 | platform darwin -- Python 3.12.8, pytest-9.0.1, pluggy-1.6.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6testenv/bin/python |
| 05-Dec-2025 11:49:18 | cachedir: .pytest_cache |
| 05-Dec-2025 11:49:18 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit |
| 05-Dec-2025 11:49:18 | configfile: pytest.ini |
| 05-Dec-2025 11:49:21 | collecting ... collected 13 items |
| 05-Dec-2025 11:49:21 | |
| 05-Dec-2025 11:49:21 | |
| 05-Dec-2025 11:49:21 | 2025-12-05 16:49:22 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:21 | test_task_uvmodelfit.py::uvmodelfit_test::test_antennaSelect There are 980 - 3 = 977 degrees of freedom. |
| 05-Dec-2025 11:49:21 | iter=0: reduced chi2=0.501236: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:21 | iter=1: reduced chi2=1.77453e-05: I=0.0013145, dir=[8.95583e-05, 7.85388e-06] arcsec |
| 05-Dec-2025 11:49:21 | iter=2: reduced chi2=1.72377e-05: I=0.000316343, dir=[0.0682531, 0.00598739] arcsec |
| 05-Dec-2025 11:49:21 | iter=3: reduced chi2=1.7211e-05: I=0.000338998, dir=[0.342586, 0.0353777] arcsec |
| 05-Dec-2025 11:49:21 | iter=4: reduced chi2=1.71964e-05: I=0.000416799, dir=[0.501573, 0.0803145] arcsec |
| 05-Dec-2025 11:49:21 | iter=5: reduced chi2=1.71922e-05: I=0.000444463, dir=[0.56108, 0.124786] arcsec |
| 05-Dec-2025 11:49:21 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:21 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:21 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:21 | I = 0.000444463 +/- 0.0451754 |
| 05-Dec-2025 11:49:21 | x = 0.56108 +/- 52.0831 arcsec |
| 05-Dec-2025 11:49:21 | y = 0.124786 +/- 45.3544 arcsec |
| 05-Dec-2025 11:49:21 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 05-Dec-2025 11:49:21 | 2025-12-05 16:49:22 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:21 | There are 980 - 3 = 977 degrees of freedom. |
| 05-Dec-2025 11:49:21 | iter=0: reduced chi2=0.501362: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:21 | iter=1: reduced chi2=3.658e-06: I=0.00117479, dir=[-9.53752e-05, -2.13624e-05] arcsec |
| 05-Dec-2025 11:49:21 | iter=2: reduced chi2=3.15144e-06: I=0.000176508, dir=[-0.0813117, -0.0182157] arcsec |
| 05-Dec-2025 11:49:21 | iter=3: reduced chi2=3.12506e-06: I=0.000211294, dir=[-0.564185, -0.143054] arcsec |
| 05-Dec-2025 11:49:21 | iter=4: reduced chi2=3.1118e-06: I=0.000332861, dir=[-0.627584, -0.268863] arcsec |
| 05-Dec-2025 11:49:21 | iter=5: reduced chi2=3.11016e-06: I=0.000350381, dir=[-0.647598, -0.32336] arcsec |
| 05-Dec-2025 11:49:21 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:21 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:21 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:21 | I = 0.000350381 +/- 0.0451754 |
| 05-Dec-2025 11:49:21 | x = -0.647598 +/- 60.3425 arcsec |
| 05-Dec-2025 11:49:21 | y = -0.32336 +/- 58.0239 arcsec |
| 05-Dec-2025 11:49:21 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 05-Dec-2025 11:49:21 | |
| 05-Dec-2025 11:49:21 | test_antennaSelect |
| 05-Dec-2025 11:49:21 | -------------------- |
| 05-Dec-2025 11:49:21 | |
| 05-Dec-2025 11:49:21 | Check that this parameter allows for selection based on the antenna name or id |
| 05-Dec-2025 11:49:21 | NOTE: Using just the antenna selection will raise an error saying that multiple fields are being used |
| 05-Dec-2025 11:49:21 | PASSED |
| 05-Dec-2025 11:49:21 | |
| 05-Dec-2025 11:49:21 | 2025-12-05 16:49:22 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:21 | test_task_uvmodelfit.py::uvmodelfit_test::test_comptype There are 24500 - 6 = 24494 degrees of freedom. |
| 05-Dec-2025 11:49:21 | iter=0: reduced chi2=0.223315: I=1, dir=[1, 1] arcsec, shape=[1, 1, 1] |
| 05-Dec-2025 11:49:21 | iter=1: reduced chi2=9.05439e-06: I=0.00306779, dir=[0.999972, 1.00001] arcsec, shape=[1.0055, 1, 1] |
| 05-Dec-2025 11:49:21 | iter=2: reduced chi2=6.97053e-06: I=1.60849e-05, dir=[0.99084, 1.00466] arcsec, shape=[1.00218, 1, 1] |
| 05-Dec-2025 11:49:21 | iter=3: reduced chi2=6.9699e-06: I=1.33396e-05, dir=[-0.745309, 1.87644] arcsec, shape=[0.156091, 1, 1] |
| 05-Dec-2025 11:49:21 | iter=4: reduced chi2=6.96891e-06: I=3.35394e-05, dir=[-0.823118, 2.03554] arcsec, shape=[1.53467, 1, 1] |
| 05-Dec-2025 11:49:21 | iter=5: reduced chi2=6.96758e-06: I=5.89415e-05, dir=[-0.837836, 2.22716] arcsec, shape=[1.85014, 1, 1] |
| 05-Dec-2025 11:49:21 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:21 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:21 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:21 | I = 5.89415e-05 +/- 0.0399385 |
| 05-Dec-2025 11:49:21 | x = -0.837836 +/- 279.197 arcsec |
| 05-Dec-2025 11:49:21 | y = 2.22716 +/- 263.672 arcsec |
| 05-Dec-2025 11:49:21 | a = 1.85014 +/- 2920.53 arcsec |
| 05-Dec-2025 11:49:21 | r = 1 +/- 1927.24 |
| 05-Dec-2025 11:49:21 | p = 1 +/- 57.2958 deg |
| 05-Dec-2025 11:49:21 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 05-Dec-2025 11:49:21 | 2025-12-05 16:49:22 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:21 | There are 24500 - 6 = 24494 degrees of freedom. |
| 05-Dec-2025 11:49:21 | iter=0: reduced chi2=0.115118: I=1, dir=[1, 1] arcsec, shape=[1, 1, 1] |
| 05-Dec-2025 11:49:21 | iter=1: reduced chi2=7.48282e-06: I=0.00211933, dir=[0.999935, 1.00006] arcsec, shape=[1.00134, 1, 1] |
| 05-Dec-2025 11:49:21 | iter=2: reduced chi2=6.97053e-06: I=3.76991e-05, dir=[0.969151, 1.02795] arcsec, shape=[1.01162, 1, 1] |
| 05-Dec-2025 11:49:21 | iter=3: reduced chi2=6.96848e-06: I=4.99042e-05, dir=[-0.814741, 2.65048] arcsec, shape=[1.93255, 1, 1] |
| 05-Dec-2025 11:49:22 | iter=4: reduced chi2=6.96635e-06: I=9.04344e-05, dir=[-0.521044, 2.2073] arcsec, shape=[1.30367, 0.871477, 1] |
| 05-Dec-2025 11:49:22 | iter=5: reduced chi2=6.96483e-06: I=0.000124177, dir=[-0.518584, 2.29109] arcsec, shape=[1.35875, 1, 18.5073] |
| 05-Dec-2025 11:49:22 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:22 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:22 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:22 | I = 0.000124177 +/- 0.0356416 |
| 05-Dec-2025 11:49:22 | x = -0.518584 +/- 171.745 arcsec |
| 05-Dec-2025 11:49:22 | y = 2.29109 +/- 165.21 arcsec |
| 05-Dec-2025 11:49:22 | a = 1.35875 +/- 425.283 arcsec |
| 05-Dec-2025 11:49:22 | r = 1 +/- 444.81 |
| 05-Dec-2025 11:49:22 | p = 18.5073 +/- 57.2958 deg |
| 05-Dec-2025 11:49:22 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 05-Dec-2025 11:49:22 | |
| 05-Dec-2025 11:49:22 | test_comptype |
| 05-Dec-2025 11:49:22 | --------------- |
| 05-Dec-2025 11:49:22 | |
| 05-Dec-2025 11:49:22 | Check that the comptype parameter changes the component model type |
| 05-Dec-2025 11:49:22 | PASSED |
| 05-Dec-2025 11:49:22 | |
| 05-Dec-2025 11:49:22 | 2025-12-05 16:49:22 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:22 | test_task_uvmodelfit.py::uvmodelfit_test::test_fieldSelect There are 24500 - 3 = 24497 degrees of freedom. |
| 05-Dec-2025 11:49:22 | iter=0: reduced chi2=0.500026: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:22 | iter=1: reduced chi2=1.30279e-06: I=0.00103511, dir=[-2.3514e-06, -6.82833e-07] arcsec |
| 05-Dec-2025 11:49:22 | iter=2: reduced chi2=8.03765e-07: I=3.66475e-05, dir=[-0.00227513, -0.000660685] arcsec |
| 05-Dec-2025 11:49:22 | iter=3: reduced chi2=8.03717e-07: I=3.61935e-05, dir=[-0.066776, -0.0192953] arcsec |
| 05-Dec-2025 11:49:22 | iter=4: reduced chi2=8.03657e-07: I=3.75341e-05, dir=[-0.138375, -0.0379022] arcsec |
| 05-Dec-2025 11:49:22 | iter=5: reduced chi2=8.03594e-07: I=3.9096e-05, dir=[-0.209874, -0.056095] arcsec |
| 05-Dec-2025 11:49:22 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:22 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:22 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:22 | I = 3.9096e-05 +/- 0.00903508 |
| 05-Dec-2025 11:49:22 | x = -0.209874 +/- 83.8907 arcsec |
| 05-Dec-2025 11:49:22 | y = -0.056095 +/- 73.5601 arcsec |
| 05-Dec-2025 11:49:22 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 05-Dec-2025 11:49:22 | 2025-12-05 16:49:22 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:22 | There are 24500 - 3 = 24497 degrees of freedom. |
| 05-Dec-2025 11:49:22 | iter=0: reduced chi2=0.50007: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:22 | iter=1: reduced chi2=7.46871e-06: I=0.000996844, dir=[-1.76161e-06, -2.03276e-06] arcsec |
| 05-Dec-2025 11:49:22 | iter=2: reduced chi2=6.96965e-06: I=-1.66014e-06, dir=[-0.00176984, -0.00204231] arcsec |
| 05-Dec-2025 11:49:22 | iter=3: reduced chi2=6.96965e-06: I=-1.67684e-06, dir=[0.0389955, 0.046368] arcsec |
| 05-Dec-2025 11:49:22 | iter=4: reduced chi2=6.96964e-06: I=-1.79695e-06, dir=[0.11497, 0.0783099] arcsec |
| 05-Dec-2025 11:49:22 | iter=5: reduced chi2=6.96964e-06: I=-2.16021e-06, dir=[0.264308, 0.0633136] arcsec |
| 05-Dec-2025 11:49:22 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:22 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:22 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:22 | I = -2.16021e-06 +/- 0.00903508 |
| 05-Dec-2025 11:49:22 | x = 0.264308 +/- 1518.11 arcsec |
| 05-Dec-2025 11:49:22 | y = 0.0633136 +/- 1331.3 arcsec |
| 05-Dec-2025 11:49:22 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 05-Dec-2025 11:49:22 | |
| 05-Dec-2025 11:49:22 | test_fieldSelect |
| 05-Dec-2025 11:49:22 | ------------------- |
| 05-Dec-2025 11:49:22 | |
| 05-Dec-2025 11:49:22 | Check that the field parameter properly selects fields by name or by id |
| 05-Dec-2025 11:49:22 | TODO find out what is wrong with selecting multiple fields |
| 05-Dec-2025 11:49:22 | PASSED |
| 05-Dec-2025 11:49:22 | |
| 05-Dec-2025 11:49:22 | 2025-12-05 16:49:22 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:22 | test_task_uvmodelfit.py::uvmodelfit_test::test_niter There are 24500 - 3 = 24497 degrees of freedom. |
| 05-Dec-2025 11:49:22 | iter=0: reduced chi2=0.50007: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:22 | iter=1: reduced chi2=7.46871e-06: I=0.000996844, dir=[-1.76161e-06, -2.03276e-06] arcsec |
| 05-Dec-2025 11:49:22 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:22 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:22 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:22 | I = 0.000996844 +/- 0.00903508 |
| 05-Dec-2025 11:49:22 | x = -1.76161e-06 +/- 3.28982 arcsec |
| 05-Dec-2025 11:49:22 | y = -2.03276e-06 +/- 2.88499 arcsec |
| 05-Dec-2025 11:49:22 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 05-Dec-2025 11:49:22 | 2025-12-05 16:49:22 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:22 | There are 24500 - 3 = 24497 degrees of freedom. |
| 05-Dec-2025 11:49:22 | iter=0: reduced chi2=0.50007: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:22 | iter=1: reduced chi2=7.46871e-06: I=0.000996844, dir=[-1.76161e-06, -2.03276e-06] arcsec |
| 05-Dec-2025 11:49:22 | iter=2: reduced chi2=6.96965e-06: I=-1.66014e-06, dir=[-0.00176984, -0.00204231] arcsec |
| 05-Dec-2025 11:49:22 | iter=3: reduced chi2=6.96965e-06: I=-1.67684e-06, dir=[0.0389955, 0.046368] arcsec |
| 05-Dec-2025 11:49:22 | iter=4: reduced chi2=6.96964e-06: I=-1.79695e-06, dir=[0.11497, 0.0783099] arcsec |
| 05-Dec-2025 11:49:22 | iter=5: reduced chi2=6.96964e-06: I=-2.16021e-06, dir=[0.264308, 0.0633136] arcsec |
| 05-Dec-2025 11:49:22 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:22 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:22 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:22 | I = -2.16021e-06 +/- 0.00903508 |
| 05-Dec-2025 11:49:22 | x = 0.264308 +/- 1518.11 arcsec |
| 05-Dec-2025 11:49:22 | y = 0.0633136 +/- 1331.3 arcsec |
| 05-Dec-2025 11:49:22 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 05-Dec-2025 11:49:22 | |
| 05-Dec-2025 11:49:22 | test_niter |
| 05-Dec-2025 11:49:22 | ----------- |
| 05-Dec-2025 11:49:22 | |
| 05-Dec-2025 11:49:22 | Check that the number of niter parameter selects the number of iterations uvmodelfit runs |
| 05-Dec-2025 11:49:22 | PASSED |
| 05-Dec-2025 11:49:22 | |
| 05-Dec-2025 11:49:22 | 2025-12-05 16:49:23 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:22 | test_task_uvmodelfit.py::uvmodelfit_test::test_outfile There are 24500 - 3 = 24497 degrees of freedom. |
| 05-Dec-2025 11:49:22 | iter=0: reduced chi2=0.50007: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:22 | iter=1: reduced chi2=7.46871e-06: I=0.000996844, dir=[-1.76161e-06, -2.03276e-06] arcsec |
| 05-Dec-2025 11:49:22 | iter=2: reduced chi2=6.96965e-06: I=-1.66014e-06, dir=[-0.00176984, -0.00204231] arcsec |
| 05-Dec-2025 11:49:22 | iter=3: reduced chi2=6.96965e-06: I=-1.67684e-06, dir=[0.0389955, 0.046368] arcsec |
| 05-Dec-2025 11:49:22 | iter=4: reduced chi2=6.96964e-06: I=-1.79695e-06, dir=[0.11497, 0.0783099] arcsec |
| 05-Dec-2025 11:49:22 | iter=5: reduced chi2=6.96964e-06: I=-2.16021e-06, dir=[0.264308, 0.0633136] arcsec |
| 05-Dec-2025 11:49:22 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:22 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:22 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:22 | I = -2.16021e-06 +/- 0.00903508 |
| 05-Dec-2025 11:49:22 | x = 0.264308 +/- 1518.11 arcsec |
| 05-Dec-2025 11:49:22 | y = 0.0633136 +/- 1331.3 arcsec |
| 05-Dec-2025 11:49:22 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 05-Dec-2025 11:49:22 | |
| 05-Dec-2025 11:49:22 | test_outfile |
| 05-Dec-2025 11:49:22 | -------------- |
| 05-Dec-2025 11:49:22 | |
| 05-Dec-2025 11:49:22 | Check that the task creates an output file when specified with the output parameter |
| 05-Dec-2025 11:49:22 | PASSED |
| 05-Dec-2025 11:49:22 | |
| 05-Dec-2025 11:49:22 | 2025-12-05 16:49:23 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:22 | test_task_uvmodelfit.py::uvmodelfit_test::test_scanSelect There are 24500 - 3 = 24497 degrees of freedom. |
| 05-Dec-2025 11:49:22 | iter=0: reduced chi2=0.50007: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:22 | iter=1: reduced chi2=7.46871e-06: I=0.000996844, dir=[-1.76161e-06, -2.03276e-06] arcsec |
| 05-Dec-2025 11:49:22 | iter=2: reduced chi2=6.96965e-06: I=-1.66014e-06, dir=[-0.00176984, -0.00204231] arcsec |
| 05-Dec-2025 11:49:22 | iter=3: reduced chi2=6.96965e-06: I=-1.67684e-06, dir=[0.0389955, 0.046368] arcsec |
| 05-Dec-2025 11:49:22 | iter=4: reduced chi2=6.96964e-06: I=-1.79695e-06, dir=[0.11497, 0.0783099] arcsec |
| 05-Dec-2025 11:49:22 | iter=5: reduced chi2=6.96964e-06: I=-2.16021e-06, dir=[0.264308, 0.0633136] arcsec |
| 05-Dec-2025 11:49:22 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:22 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:22 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:22 | I = -2.16021e-06 +/- 0.00903508 |
| 05-Dec-2025 11:49:22 | x = 0.264308 +/- 1518.11 arcsec |
| 05-Dec-2025 11:49:22 | y = 0.0633136 +/- 1331.3 arcsec |
| 05-Dec-2025 11:49:22 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 05-Dec-2025 11:49:22 | 2025-12-05 16:49:23 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:22 | There are 24500 - 3 = 24497 degrees of freedom. |
| 05-Dec-2025 11:49:22 | iter=0: reduced chi2=0.499978: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:22 | iter=1: reduced chi2=1.63087e-05: I=0.00109826, dir=[8.44869e-08, -1.13222e-05] arcsec |
| 05-Dec-2025 11:49:22 | iter=2: reduced chi2=1.58096e-05: I=9.98546e-05, dir=[7.69394e-05, -0.0103262] arcsec |
| 05-Dec-2025 11:49:22 | iter=3: reduced chi2=1.58079e-05: I=0.000100536, dir=[-1.17067e-05, -0.12901] arcsec |
| 05-Dec-2025 11:49:23 | iter=4: reduced chi2=1.58045e-05: I=0.000117457, dir=[-0.0105881, -0.29339] arcsec |
| 05-Dec-2025 11:49:23 | iter=5: reduced chi2=1.58015e-05: I=0.00014519, dir=[-0.0319589, -0.428824] arcsec |
| 05-Dec-2025 11:49:23 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:23 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:23 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:23 | I = 0.00014519 +/- 0.00903508 |
| 05-Dec-2025 11:49:23 | x = -0.0319589 +/- 22.5851 arcsec |
| 05-Dec-2025 11:49:23 | y = -0.428824 +/- 19.8077 arcsec |
| 05-Dec-2025 11:49:23 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 05-Dec-2025 11:49:23 | |
| 05-Dec-2025 11:49:23 | test_scanSelect |
| 05-Dec-2025 11:49:23 | ----------------- |
| 05-Dec-2025 11:49:23 | |
| 05-Dec-2025 11:49:23 | Check that this parameter allows for seletion based on the scan id |
| 05-Dec-2025 11:49:23 | PASSED |
| 05-Dec-2025 11:49:23 | |
| 05-Dec-2025 11:49:23 | 2025-12-05 16:49:23 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:23 | test_task_uvmodelfit.py::uvmodelfit_test::test_selectData There are 24500 - 3 = 24497 degrees of freedom. |
| 05-Dec-2025 11:49:23 | iter=0: reduced chi2=0.50007: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:23 | iter=1: reduced chi2=7.46871e-06: I=0.000996844, dir=[-1.76161e-06, -2.03276e-06] arcsec |
| 05-Dec-2025 11:49:23 | iter=2: reduced chi2=6.96965e-06: I=-1.66014e-06, dir=[-0.00176984, -0.00204231] arcsec |
| 05-Dec-2025 11:49:23 | iter=3: reduced chi2=6.96965e-06: I=-1.67684e-06, dir=[0.0389955, 0.046368] arcsec |
| 05-Dec-2025 11:49:23 | iter=4: reduced chi2=6.96964e-06: I=-1.79695e-06, dir=[0.11497, 0.0783099] arcsec |
| 05-Dec-2025 11:49:23 | iter=5: reduced chi2=6.96964e-06: I=-2.16021e-06, dir=[0.264308, 0.0633136] arcsec |
| 05-Dec-2025 11:49:23 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:23 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:23 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:23 | I = -2.16021e-06 +/- 0.00903508 |
| 05-Dec-2025 11:49:23 | x = 0.264308 +/- 1518.11 arcsec |
| 05-Dec-2025 11:49:23 | y = 0.0633136 +/- 1331.3 arcsec |
| 05-Dec-2025 11:49:23 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 05-Dec-2025 11:49:23 | 2025-12-05 16:49:23 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:23 | There are 120 - 3 = 117 degrees of freedom. |
| 05-Dec-2025 11:49:23 | iter=0: reduced chi2=0.513046: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:23 | iter=1: reduced chi2=9.40374e-06: I=0.0007885, dir=[-0.0037039, -0.00478739] arcsec |
| 05-Dec-2025 11:49:23 | iter=2: reduced chi2=8.94083e-06: I=-0.000202281, dir=[-4.71361, -6.09448] arcsec |
| 05-Dec-2025 11:49:23 | iter=3: reduced chi2=8.91896e-06: I=-5.21638e-06, dir=[7.26954, 7.59266] arcsec |
| 05-Dec-2025 11:49:23 | iter=4: reduced chi2=8.83123e-06: I=-0.000368954, dir=[-281.448, -242.991] arcsec |
| 05-Dec-2025 11:49:23 | iter=5: reduced chi2=8.74547e-06: I=-0.000418384, dir=[-287.719, -251.083] arcsec |
| 05-Dec-2025 11:49:23 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:23 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:23 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:23 | I = -0.000418384 +/- 0.129099 |
| 05-Dec-2025 11:49:23 | x = -287.719 +/- 436.244 arcsec |
| 05-Dec-2025 11:49:23 | y = -251.083 +/- 539.275 arcsec |
| 05-Dec-2025 11:49:23 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 05-Dec-2025 11:49:23 | |
| 05-Dec-2025 11:49:23 | test_selectData |
| 05-Dec-2025 11:49:23 | ----------------- |
| 05-Dec-2025 11:49:23 | |
| 05-Dec-2025 11:49:23 | Allows for the use of the data selection parameters timerang, uvrange, antenna, scan, and msselect when True |
| 05-Dec-2025 11:49:23 | PASSED |
| 05-Dec-2025 11:49:23 | |
| 05-Dec-2025 11:49:23 | 2025-12-05 16:49:23 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:23 | test_task_uvmodelfit.py::uvmodelfit_test::test_sourcepar There are 24500 - 3 = 24497 degrees of freedom. |
| 05-Dec-2025 11:49:23 | iter=0: reduced chi2=0.50007: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:23 | iter=1: reduced chi2=7.46871e-06: I=0.000996844, dir=[-1.76161e-06, -2.03276e-06] arcsec |
| 05-Dec-2025 11:49:23 | iter=2: reduced chi2=6.96965e-06: I=-1.66014e-06, dir=[-0.00176984, -0.00204231] arcsec |
| 05-Dec-2025 11:49:23 | iter=3: reduced chi2=6.96965e-06: I=-1.67684e-06, dir=[0.0389955, 0.046368] arcsec |
| 05-Dec-2025 11:49:23 | iter=4: reduced chi2=6.96964e-06: I=-1.79695e-06, dir=[0.11497, 0.0783099] arcsec |
| 05-Dec-2025 11:49:23 | iter=5: reduced chi2=6.96964e-06: I=-2.16021e-06, dir=[0.264308, 0.0633136] arcsec |
| 05-Dec-2025 11:49:23 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:23 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:23 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:23 | I = -2.16021e-06 +/- 0.00903508 |
| 05-Dec-2025 11:49:23 | x = 0.264308 +/- 1518.11 arcsec |
| 05-Dec-2025 11:49:23 | y = 0.0633136 +/- 1331.3 arcsec |
| 05-Dec-2025 11:49:23 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 05-Dec-2025 11:49:23 | 2025-12-05 16:49:23 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:23 | There are 24500 - 3 = 24497 degrees of freedom. |
| 05-Dec-2025 11:49:23 | iter=0: reduced chi2=0.500062: I=1, dir=[1, 1] arcsec |
| 05-Dec-2025 11:49:23 | iter=1: reduced chi2=7.46868e-06: I=0.00100539, dir=[0.999992, 1] arcsec |
| 05-Dec-2025 11:49:23 | iter=2: reduced chi2=6.96963e-06: I=6.89253e-06, dir=[0.991957, 1.00281] arcsec |
| 05-Dec-2025 11:49:23 | iter=3: reduced chi2=6.96949e-06: I=6.96351e-06, dir=[-0.174069, 1.40248] arcsec |
| 05-Dec-2025 11:49:23 | iter=4: reduced chi2=6.96921e-06: I=2.56854e-05, dir=[0.214229, 1.38695] arcsec |
| 05-Dec-2025 11:49:23 | iter=5: reduced chi2=6.96919e-06: I=2.994e-05, dir=[0.173962, 1.38327] arcsec |
| 05-Dec-2025 11:49:23 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:23 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:23 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:23 | I = 2.994e-05 +/- 0.00903508 |
| 05-Dec-2025 11:49:23 | x = 0.173962 +/- 109.533 arcsec |
| 05-Dec-2025 11:49:23 | y = 1.38327 +/- 96.0549 arcsec |
| 05-Dec-2025 11:49:23 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 05-Dec-2025 11:49:23 | |
| 05-Dec-2025 11:49:23 | test_sourcepar |
| 05-Dec-2025 11:49:23 | ---------------- |
| 05-Dec-2025 11:49:23 | |
| 05-Dec-2025 11:49:23 | Check that sourcepar selects starting guess for component parameters |
| 05-Dec-2025 11:49:23 | PASSED |
| 05-Dec-2025 11:49:23 | |
| 05-Dec-2025 11:49:23 | 2025-12-05 16:49:24 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:23 | test_task_uvmodelfit.py::uvmodelfit_test::test_spwSelect There are 120250 - 3 = 120247 degrees of freedom. |
| 05-Dec-2025 11:49:23 | iter=0: reduced chi2=7.53424: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:23 | iter=1: reduced chi2=5.60908: I=0.00491201, dir=[0.00397324, 0.000426711] arcsec |
| 05-Dec-2025 11:49:23 | iter=2: reduced chi2=5.60904: I=0.00392362, dir=[0.822108, 0.081166] arcsec |
| 05-Dec-2025 11:49:24 | iter=3: reduced chi2=5.60903: I=0.00607976, dir=[3.01616, -1.14771] arcsec |
| 05-Dec-2025 11:49:24 | iter=4: reduced chi2=5.609: I=0.00620436, dir=[2.34701, 1.20117] arcsec |
| 05-Dec-2025 11:49:24 | iter=5: reduced chi2=5.60892: I=0.00758467, dir=[2.57163, 0.636844] arcsec |
| 05-Dec-2025 11:49:24 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:24 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:24 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:24 | I = 0.00758467 +/- 0.00207026 |
| 05-Dec-2025 11:49:24 | x = 2.57163 +/- 0.441119 arcsec |
| 05-Dec-2025 11:49:24 | y = 0.636844 +/- 0.400796 arcsec |
| 05-Dec-2025 11:49:24 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 05-Dec-2025 11:49:24 | 2025-12-05 16:49:24 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:24 | There are 120250 - 3 = 120247 degrees of freedom. |
| 05-Dec-2025 11:49:24 | iter=0: reduced chi2=7.51732: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:24 | iter=1: reduced chi2=5.74274: I=0.000542439, dir=[-0.00820008, -0.00879566] arcsec |
| 05-Dec-2025 11:49:24 | iter=2: reduced chi2=5.74274: I=-0.000361932, dir=[-14.2715, -15.2826] arcsec |
| 05-Dec-2025 11:49:24 | iter=3: reduced chi2=5.74274: I=-0.000196652, dir=[-0.856895, -18.97] arcsec |
| 05-Dec-2025 11:49:24 | iter=4: reduced chi2=5.74274: I=-0.000207681, dir=[2.06202, -19.1228] arcsec |
| 05-Dec-2025 11:49:24 | iter=5: reduced chi2=5.74273: I=-0.000254358, dir=[0.975174, -18.2686] arcsec |
| 05-Dec-2025 11:49:24 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:24 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:24 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:24 | I = -0.000254358 +/- 0.00216578 |
| 05-Dec-2025 11:49:24 | x = 0.975174 +/- 14.3472 arcsec |
| 05-Dec-2025 11:49:24 | y = -18.2686 +/- 12.2369 arcsec |
| 05-Dec-2025 11:49:24 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 05-Dec-2025 11:49:24 | |
| 05-Dec-2025 11:49:24 | test_spwSelect |
| 05-Dec-2025 11:49:24 | ---------------- |
| 05-Dec-2025 11:49:24 | |
| 05-Dec-2025 11:49:24 | Check that the spw parameter properly selects spectral windows |
| 05-Dec-2025 11:49:24 | PASSED |
| 05-Dec-2025 11:49:24 | |
| 05-Dec-2025 11:49:24 | 2025-12-05 16:49:25 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:24 | test_task_uvmodelfit.py::uvmodelfit_test::test_takesvis There are 24500 - 3 = 24497 degrees of freedom. |
| 05-Dec-2025 11:49:24 | iter=0: reduced chi2=0.500026: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:24 | iter=1: reduced chi2=1.30279e-06: I=0.00103511, dir=[-2.3514e-06, -6.82833e-07] arcsec |
| 05-Dec-2025 11:49:25 | iter=2: reduced chi2=8.03765e-07: I=3.66475e-05, dir=[-0.00227513, -0.000660685] arcsec |
| 05-Dec-2025 11:49:25 | iter=3: reduced chi2=8.03717e-07: I=3.61935e-05, dir=[-0.066776, -0.0192953] arcsec |
| 05-Dec-2025 11:49:25 | iter=4: reduced chi2=8.03657e-07: I=3.75341e-05, dir=[-0.138375, -0.0379022] arcsec |
| 05-Dec-2025 11:49:25 | iter=5: reduced chi2=8.03594e-07: I=3.9096e-05, dir=[-0.209874, -0.056095] arcsec |
| 05-Dec-2025 11:49:25 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:25 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:25 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:25 | I = 3.9096e-05 +/- 0.00903508 |
| 05-Dec-2025 11:49:25 | x = -0.209874 +/- 83.8907 arcsec |
| 05-Dec-2025 11:49:25 | y = -0.056095 +/- 73.5601 arcsec |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | test_takesvis |
| 05-Dec-2025 11:49:25 | ----------------- |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Check that the task takes a valid visibility file |
| 05-Dec-2025 11:49:25 | PASSED |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | 2025-12-05 16:49:25 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:25 | test_task_uvmodelfit.py::uvmodelfit_test::test_timerangeSelect There are 24500 - 3 = 24497 degrees of freedom. |
| 05-Dec-2025 11:49:25 | iter=0: reduced chi2=0.504128: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:25 | iter=1: reduced chi2=0.00132736: I=-0.00173421, dir=[-0.000110601, 4.91035e-05] arcsec |
| 05-Dec-2025 11:49:25 | iter=2: reduced chi2=0.00132666: I=-0.00273533, dir=[0.0636726, -0.028279] arcsec |
| 05-Dec-2025 11:49:25 | iter=3: reduced chi2=0.00132647: I=-0.00280967, dir=[0.11429, -0.0464787] arcsec |
| 05-Dec-2025 11:49:25 | iter=4: reduced chi2=0.00132621: I=-0.00287665, dir=[0.172625, -0.0644859] arcsec |
| 05-Dec-2025 11:49:25 | iter=5: reduced chi2=0.00132586: I=-0.00296507, dir=[0.240406, -0.0824503] arcsec |
| 05-Dec-2025 11:49:25 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:25 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:25 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:25 | I = -0.00296507 +/- 0.00903508 |
| 05-Dec-2025 11:49:25 | x = 0.240406 +/- 1.10742 arcsec |
| 05-Dec-2025 11:49:25 | y = -0.0824503 +/- 0.969818 arcsec |
| 05-Dec-2025 11:49:25 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 05-Dec-2025 11:49:25 | 2025-12-05 16:49:25 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:25 | There are 24500 - 3 = 24497 degrees of freedom. |
| 05-Dec-2025 11:49:25 | iter=0: reduced chi2=0.501728: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:25 | iter=1: reduced chi2=0.00217666: I=0.00150831, dir=[1.40788e-05, 9.95773e-06] arcsec |
| 05-Dec-2025 11:49:25 | iter=2: reduced chi2=0.00217616: I=0.000510322, dir=[0.00935402, 0.00661427] arcsec |
| 05-Dec-2025 11:49:25 | iter=3: reduced chi2=0.00217616: I=0.000511476, dir=[0.0392212, 0.0243698] arcsec |
| 05-Dec-2025 11:49:25 | iter=4: reduced chi2=0.00217615: I=0.000516714, dir=[0.0766723, 0.037258] arcsec |
| 05-Dec-2025 11:49:25 | iter=5: reduced chi2=0.00217615: I=0.000523594, dir=[0.124002, 0.0466822] arcsec |
| 05-Dec-2025 11:49:25 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:25 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:25 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:25 | I = 0.000523594 +/- 0.00903508 |
| 05-Dec-2025 11:49:25 | x = 0.124002 +/- 6.27964 arcsec |
| 05-Dec-2025 11:49:25 | y = 0.0466822 +/- 5.49192 arcsec |
| 05-Dec-2025 11:49:25 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | test_timerangeSelect |
| 05-Dec-2025 11:49:25 | ----------------------- |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Check that the timerange parameter properly selects the desired timerange |
| 05-Dec-2025 11:49:25 | PASSED |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | 2025-12-05 16:49:25 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:25 | test_task_uvmodelfit.py::uvmodelfit_test::test_uvrangeSelect There are 3440 - 3 = 3437 degrees of freedom. |
| 05-Dec-2025 11:49:25 | iter=0: reduced chi2=0.500333: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:25 | iter=1: reduced chi2=4.73559e-05: I=0.00114933, dir=[-0.000549538, 1.07287e-05] arcsec |
| 05-Dec-2025 11:49:25 | iter=2: reduced chi2=4.68293e-05: I=0.000151181, dir=[-0.47899, 0.00933264] arcsec |
| 05-Dec-2025 11:49:25 | iter=3: reduced chi2=4.67821e-05: I=0.000332335, dir=[-4.03323, -0.0859994] arcsec |
| 05-Dec-2025 11:49:25 | iter=4: reduced chi2=4.65965e-05: I=0.000425135, dir=[-4.4663, -1.56114] arcsec |
| 05-Dec-2025 11:49:25 | iter=5: reduced chi2=4.64256e-05: I=0.00085118, dir=[-5.06439, -1.72933] arcsec |
| 05-Dec-2025 11:49:25 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:25 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:25 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:25 | I = 0.00085118 +/- 0.0241121 |
| 05-Dec-2025 11:49:25 | x = -5.06439 +/- 34.2969 arcsec |
| 05-Dec-2025 11:49:25 | y = -1.72933 +/- 31.3727 arcsec |
| 05-Dec-2025 11:49:25 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 05-Dec-2025 11:49:25 | 2025-12-05 16:49:25 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:25 | There are 8440 - 3 = 8437 degrees of freedom. |
| 05-Dec-2025 11:49:25 | iter=0: reduced chi2=0.500218: I=1, dir=[0, 0] arcsec |
| 05-Dec-2025 11:49:25 | iter=1: reduced chi2=1.47216e-06: I=0.000960188, dir=[2.69551e-05, 1.00754e-06] arcsec |
| 05-Dec-2025 11:49:25 | iter=2: reduced chi2=9.73043e-07: I=-3.835e-05, dir=[0.028114, 0.00105097] arcsec |
| 05-Dec-2025 11:49:25 | iter=3: reduced chi2=9.71377e-07: I=-3.62331e-05, dir=[-0.683209, -0.0300068] arcsec |
| 05-Dec-2025 11:49:25 | iter=4: reduced chi2=9.69616e-07: I=-8.21256e-05, dir=[-0.919942, 0.215778] arcsec |
| 05-Dec-2025 11:49:25 | iter=5: reduced chi2=9.69552e-07: I=-9.07441e-05, dir=[-0.957306, 0.215738] arcsec |
| 05-Dec-2025 11:49:25 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:25 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:25 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:25 | I = -9.07441e-05 +/- 0.0153937 |
| 05-Dec-2025 11:49:25 | x = -0.957306 +/- 91.656 arcsec |
| 05-Dec-2025 11:49:25 | y = 0.215738 +/- 89.4617 arcsec |
| 05-Dec-2025 11:49:25 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | test_uvrangeSelect |
| 05-Dec-2025 11:49:25 | -------------------- |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Check that the uvrange parameter properly select the uvranges |
| 05-Dec-2025 11:49:25 | PASSED |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | 2025-12-05 16:49:26 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:25 | test_task_uvmodelfit.py::uvmodelfit_test::test_varypar There are 24500 - 3 = 24497 degrees of freedom. |
| 05-Dec-2025 11:49:25 | iter=0: reduced chi2=0.500062: I=1, dir=[1, 1] arcsec |
| 05-Dec-2025 11:49:25 | iter=1: reduced chi2=7.46868e-06: I=0.00100539, dir=[0.999992, 1] arcsec |
| 05-Dec-2025 11:49:25 | iter=2: reduced chi2=6.96963e-06: I=6.89253e-06, dir=[0.991957, 1.00281] arcsec |
| 05-Dec-2025 11:49:25 | iter=3: reduced chi2=6.96949e-06: I=6.96351e-06, dir=[-0.174069, 1.40248] arcsec |
| 05-Dec-2025 11:49:25 | iter=4: reduced chi2=6.96921e-06: I=2.56854e-05, dir=[0.214229, 1.38695] arcsec |
| 05-Dec-2025 11:49:25 | iter=5: reduced chi2=6.96919e-06: I=2.994e-05, dir=[0.173962, 1.38327] arcsec |
| 05-Dec-2025 11:49:25 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:25 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:25 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:25 | I = 2.994e-05 +/- 0.00903508 |
| 05-Dec-2025 11:49:25 | x = 0.173962 +/- 109.533 arcsec |
| 05-Dec-2025 11:49:25 | y = 1.38327 +/- 96.0549 arcsec |
| 05-Dec-2025 11:49:25 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test1.cl |
| 05-Dec-2025 11:49:25 | 2025-12-05 16:49:26 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 05-Dec-2025 11:49:25 | There are 24500 - 1 = 24499 degrees of freedom. |
| 05-Dec-2025 11:49:25 | iter=0: reduced chi2=0.500021: I=1, dir=[1, 1] arcsec |
| 05-Dec-2025 11:49:25 | iter=1: reduced chi2=7.46808e-06: I=0.00100539, dir=[1, 1] arcsec |
| 05-Dec-2025 11:49:25 | iter=2: reduced chi2=6.96906e-06: I=6.89195e-06, dir=[1, 1] arcsec |
| 05-Dec-2025 11:49:25 | iter=3: reduced chi2=6.96906e-06: I=6.39283e-06, dir=[1, 1] arcsec |
| 05-Dec-2025 11:49:25 | iter=4: reduced chi2=6.96906e-06: I=6.3927e-06, dir=[1, 1] arcsec |
| 05-Dec-2025 11:49:25 | iter=5: reduced chi2=6.96906e-06: I=6.3927e-06, dir=[1, 1] arcsec |
| 05-Dec-2025 11:49:25 | If data weights are arbitrarily scaled, the following formal errors |
| 05-Dec-2025 11:49:25 | will be underestimated by at least a factor sqrt(reduced chi2). If |
| 05-Dec-2025 11:49:25 | the fit is systematically poor, the errors are much worse. |
| 05-Dec-2025 11:49:25 | I = 6.3927e-06 +/- 0.00903508 |
| 05-Dec-2025 11:49:25 | x = 1 +/- 0 arcsec |
| 05-Dec-2025 11:49:25 | y = 1 +/- 0 arcsec |
| 05-Dec-2025 11:49:25 | Writing componentlist to file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/test2.cl |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | test_varypar |
| 05-Dec-2025 11:49:25 | -------------- |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Check that varypar selects which parameters to let vary the fit |
| 05-Dec-2025 11:49:25 | PASSED |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_uvmodelfit/nose.xml - |
| 05-Dec-2025 11:49:25 | ======================== 13 passed, 1 warning in 7.30s ========================= |
| 05-Dec-2025 11:49:25 | HAVE_PYTEST: True |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Namespace(list=False, verbose=False, dry_run=False, classes=None, file=None, mapfile=<_io.TextIOWrapper name='./casatestutils/component_to_test_map.json' mode='r' encoding='UTF-8'>, branch='CAS-14642', merge_target=None, pkg=None, work_dir=None, ncores=2, test_paths=None, test_list=None, test_config=None, test_group='Calibration,pccor', pmode=None, bamboo=False, cachedir=None, ignore_list='test_casampi,test_task_msview,test_task_imview,test_task_plotms') |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Operating system: Darwin |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Testing Components['Calibration', 'pccor'] |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Arguments Sent Direct To Pytest : [] |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Tests to Ignore: ['test_casampi', 'test_task_msview', 'test_task_imview', 'test_task_plotms'] |
| 05-Dec-2025 11:49:25 | Running 21 Test(s) |
| 05-Dec-2025 11:49:25 | Cleaning: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/ |
| 05-Dec-2025 11:49:25 | Tests: ['test_task_appendantab', 'test_task_applycal', 'test_task_bandpass', 'test_task_blcal', 'test_task_defintent', 'test_task_delmod', 'test_task_fluxscale', 'test_task_fringefit', 'test_task_gaincal', 'test_task_gencal', 'test_task_getantposalma', 'test_task_getcalmodvla', 'test_task_getephemtable', 'test_task_initweights', 'test_task_listcal', 'test_task_pccor', 'test_task_polcal', 'test_task_polfromgain', 'test_task_rerefant', 'test_task_smoothcal', 'test_task_uvmodelfit'] |
| 05-Dec-2025 11:49:25 | Fetching Repository: casa6 |
| 05-Dec-2025 11:49:25 | Running: git clone https://open-bitbucket.nrao.edu/scm/casa/casa6 |
| 05-Dec-2025 11:49:25 | Running: git checkout origin/CAS-14642 |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Fetching Repository: casampi |
| 05-Dec-2025 11:49:25 | Running: git clone https://open-bitbucket.nrao.edu/scm/casa/casampi |
| 05-Dec-2025 11:49:25 | Tag: tags/0.5.9 |
| 05-Dec-2025 11:49:25 | Running: git checkout tags/0.5.9 |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Fetching Repository: casaplotms |
| 05-Dec-2025 11:49:25 | Running: git clone https://open-bitbucket.nrao.edu/scm/casa/casaplotms |
| 05-Dec-2025 11:49:25 | Tag: tags/2.8.1 |
| 05-Dec-2025 11:49:25 | Running: git checkout tags/2.8.1 |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Fetching Repository: casaviewer |
| 05-Dec-2025 11:49:25 | Running: git clone https://open-bitbucket.nrao.edu/scm/casa/casaviewer |
| 05-Dec-2025 11:49:25 | Tag: tags/2.4.4 |
| 05-Dec-2025 11:49:25 | Running: git checkout tags/2.4.4 |
| 05-Dec-2025 11:49:25 | Directory Of Tests: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/tests/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_listcal/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_listcal |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_listcal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_listcal/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_getephemtable/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_getephemtable |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_getephemtable/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_getephemtable/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_initweights/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_initweights |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_initweights/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_initweights/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_smoothcal/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_smoothcal |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_smoothcal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_smoothcal/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_fluxscale/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_fluxscale |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_fluxscale/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_fluxscale/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_rerefant/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_rerefant |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_rerefant/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_rerefant/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_fringefit/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_fringefit |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_fringefit/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_fringefit/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_applycal/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_applycal |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_applycal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_applycal/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_appendantab/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_appendantab |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_appendantab/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_appendantab/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_getcalmodvla/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_getcalmodvla |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_getcalmodvla/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_getcalmodvla/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_bandpass/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_bandpass |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_bandpass/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_bandpass/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_polfromgain/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_polfromgain |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_polfromgain/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_polfromgain/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_defintent/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_defintent |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_defintent/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_defintent/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_getantposalma/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_getantposalma |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_getantposalma/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_getantposalma/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_gencal/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_gencal |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_gencal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_gencal/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_pccor/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_pccor |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_pccor/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_pccor/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_delmod/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_delmod |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_delmod/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_delmod/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_blcal/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_blcal |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_blcal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_blcal/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_gaincal/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_gaincal |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_gaincal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_gaincal/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_polcal/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_polcal |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_polcal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_polcal/ |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/ |
| 05-Dec-2025 11:49:25 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit |
| 05-Dec-2025 11:49:25 | |
| 05-Dec-2025 11:49:25 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_uvmodelfit/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312/casa6/casatestutils/nosedir/test_task_uvmodelfit/ |
| 05-Dec-2025 11:49:25 | a nosedir |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_polcal |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_getephemtable |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_smoothcal |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_uvmodelfit |
| 05-Dec-2025 11:49:25 | a nosedir/summary_of_failed.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_blcal |
| 05-Dec-2025 11:49:25 | a nosedir/xml |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gaincal |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fringefit |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_getantposalma |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_appendantab |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_delmod |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_listcal |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_getcalmodvla |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_rerefant |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_bandpass |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gencal |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_pccor |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fluxscale |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_defintent |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_applycal |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_polfromgain |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_initweights |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_initweights/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_initweights/test_task_initweights.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_initweights/casa-20251205-163930.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_initweights/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_polfromgain/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_polfromgain/test_task_polfromgain.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_polfromgain/casa-20251205-164457.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_polfromgain/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_applycal/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_applycal/test_task_applycal.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_applycal/casa-20251205-164301.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_applycal/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_defintent/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_defintent/casa-20251205-164501.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_defintent/test_task_defintent.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_defintent/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fluxscale/twhya.fittest2.out.txt |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fluxscale/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fluxscale/twhya.fittest1.out.txt |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fluxscale/test_task_fluxscale.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fluxscale/casa-20251205-163947.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fluxscale/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_pccor/test_task_pccor.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_pccor/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_pccor/pccor_test.pccor |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_pccor/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_pccor/casa-20251205-164546.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_pccor/pccor_test.pccor/SPECTRAL_WINDOW |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_pccor/pccor_test.pccor/FIELD |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_pccor/pccor_test.pccor/HISTORY |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_pccor/pccor_test.pccor/ANTENNA |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_pccor/pccor_test.pccor/OBSERVATION |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gencal/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gencal/casa-20251205-164512.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gencal/test_task_gencal.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gencal/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_bandpass/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_bandpass/ngc5921.ms.flagversions |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_bandpass/test_task_bandpass.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_bandpass/casa-20251205-164450.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_bandpass/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_bandpass/ngc5921.ms.flagversions/flags.flagdata_1 |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_bandpass/ngc5921.ms.flagversions/FLAG_VERSION_LIST |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_bandpass/ngc5921.ms.flagversions/flags.flagdata_2 |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_bandpass/ngc5921.ms.flagversions/flags.flagdata_3 |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_rerefant/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_rerefant/casa-20251205-163958.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_rerefant/test_task_rerefant.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_rerefant/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_rerefant/copycal.gcal.flagversions |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_rerefant/copycal.gcal.flagversions/flags.flagdata_1 |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_rerefant/copycal.gcal.flagversions/FLAG_VERSION_LIST |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_rerefant/copycal.gcal.flagversions/flags.flagdata_2 |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_rerefant/copycal.gcal.flagversions/flags.flagdata_4 |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_rerefant/copycal.gcal.flagversions/flags.flagdata_3 |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_getcalmodvla/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_getcalmodvla/test_task_getcalmodvla.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_getcalmodvla/casa-20251205-164444.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_getcalmodvla/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_listcal/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_listcal/test_task_listcal.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_listcal/casa-20251205-163905.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_listcal/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_delmod/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_delmod/test_task_delmod.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_delmod/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_delmod/casa-20251205-164630.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_appendantab/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_appendantab/casa-20251205-164410.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_appendantab/test_task_appendantab.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_appendantab/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_getantposalma/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_getantposalma/casa-20251205-164507.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_getantposalma/test_task_getantposalma.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_getantposalma/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fringefit/casa-20251205-164005.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fringefit/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fringefit/test_task_fringefit.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fringefit/n08c1-zerorates.sbdcal |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fringefit/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fringefit/n08c1-zerorates.sbdcal/SPECTRAL_WINDOW |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fringefit/n08c1-zerorates.sbdcal/FIELD |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fringefit/n08c1-zerorates.sbdcal/HISTORY |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fringefit/n08c1-zerorates.sbdcal/ANTENNA |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_fringefit/n08c1-zerorates.sbdcal/OBSERVATION |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gaincal/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gaincal/flagged.ms.flagversions |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gaincal/casa-20251205-164729.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gaincal/temp.cal.AMP.pol1.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gaincal/temp.cal.AMP.pol0.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gaincal/temp.cal.PHASE.pol0.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gaincal/temp.cal.PHASE.pol1.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gaincal/test_task_gaincal.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gaincal/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gaincal/flagged.ms.flagversions/flags.flagdata_1 |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gaincal/flagged.ms.flagversions/FLAG_VERSION_LIST |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gaincal/flagged.ms.flagversions/flags.flagdata_2 |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_gaincal/flagged.ms.flagversions/flags.flagdata_3 |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_polcal |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_getephemtable |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_smoothcal |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_uvmodelfit |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_blcal |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_gaincal |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_fringefit |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_getantposalma |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_appendantab |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_delmod |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_listcal |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_getcalmodvla |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_rerefant |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_bandpass |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_gencal |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_pccor |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_fluxscale |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_defintent |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_applycal |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_polfromgain |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_initweights |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_initweights/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_polfromgain/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_applycal/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_defintent/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_fluxscale/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_pccor/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_gencal/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_bandpass/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_rerefant/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_getcalmodvla/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_listcal/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_delmod/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_appendantab/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_getantposalma/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_fringefit/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_gaincal/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_blcal/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_uvmodelfit/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_smoothcal/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_getephemtable/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/xml/test_task_polcal/nose.xml |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_blcal/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_blcal/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_blcal/test_task_blcal.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_blcal/casa-20251205-164634.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_uvmodelfit/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_uvmodelfit/casa-20251205-164920.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_uvmodelfit/test_task_uvmodelfit.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_uvmodelfit/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_smoothcal/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_smoothcal/test_task_smoothcal.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_smoothcal/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_smoothcal/casa-20251205-163940.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_getephemtable/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_getephemtable/casa-20251205-163923.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_getephemtable/test_task_getephemtable.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_getephemtable/short_summary.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_polcal/conftest.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_polcal/casa-20251205-164902.log |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_polcal/test_task_polcal.py |
| 05-Dec-2025 11:49:25 | a nosedir/test_task_polcal/short_summary.log |
| 05-Dec-2025 11:49:26 | Finished task 'Test wheel' with result: Success |
| 05-Dec-2025 11:49:26 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
| 05-Dec-2025 11:49:26 | Parsing test results under /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31258-TTARM15PY312... |
| 05-Dec-2025 11:49:26 | Failing task since 1 failing test cases were found. |
| 05-Dec-2025 11:49:26 | Finished task 'Parse tests' with result: Failed |
| 05-Dec-2025 11:49:26 | Running post build plugin 'Docker Container Cleanup' |
| 05-Dec-2025 11:49:26 | Running post build plugin 'NCover Results Collector' |
| 05-Dec-2025 11:49:26 | Running post build plugin 'Build Results Label Collector' |
| 05-Dec-2025 11:49:26 | Running post build plugin 'Clover Results Collector' |
| 05-Dec-2025 11:49:26 | Running post build plugin 'npm Cache Cleanup' |
| 05-Dec-2025 11:49:26 | Running post build plugin 'Artifact Copier' |
| 05-Dec-2025 11:49:26 | Publishing an artifact: requirements.txt |
| 05-Dec-2025 11:49:26 | Finished publishing of artifact Non required job artifact Http Compression On : [requirements.txt], patterns: [requirements.txt] anchored at: [wheeldirectory/] in 67.43 ms |
| 05-Dec-2025 11:49:26 | Publishing an artifact: Workdir |
| 05-Dec-2025 11:49:26 | Finished publishing of artifact Non required job artifact Http Compression On : [Workdir], patterns: [work*.tar.gz] anchored at: [wheeldirectory/] in 25.43 ms |
| 05-Dec-2025 11:49:26 | Finalising the build... |
| 05-Dec-2025 11:49:26 | Stopping timer. |
| 05-Dec-2025 11:49:26 | Build CASASPECS-DEVTESTPY31258-TTARM15PY312-2 completed. |
| 05-Dec-2025 11:49:26 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
| 05-Dec-2025 11:49:26 | Running on server: post build plugin 'NCover Results Collector' |
| 05-Dec-2025 11:49:26 | Running on server: post build plugin 'Build Labeller' |
| 05-Dec-2025 11:49:26 | Running on server: post build plugin 'Clover Delta Calculator' |
| 05-Dec-2025 11:49:26 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
| 05-Dec-2025 11:49:26 | All post build plugins have finished |
| 05-Dec-2025 11:49:26 | Generating build results summary... |
| 05-Dec-2025 11:49:26 | Saving build results to disk... |
| 05-Dec-2025 11:49:26 | Store variable context... |
| 05-Dec-2025 11:49:26 | Finished building CASASPECS-DEVTESTPY31258-TTARM15PY312-2. |