Build: #2 failed
Job: Test Tools macOS 15 Py3.12 was successful
Build log
The build generated 53,184 lines of output. The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 SEVERE getcellslice::map Exception Reported: Exception: All elements of blc must be greater than or equal to 0. |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const vector<long> &, const String &, const IPosition &, const pair<vector<long>, vector<long>> *const &) at File: /private/var/folders/60/83wxljbx2vlfbx_hy0yfv8rc0000gn/T/build-via-sdist-myh3v6fy/casatools-6.7.2.39a14607.dev5/src/tools/table/table_cmpt.cc, line: 1393 |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 SEVERE getcellslice::map Exception Reported: Exception: Element 1 of blc must be less than 4. |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const vector<long> &, const String &, const IPosition &, const pair<vector<long>, vector<long>> *const &) at File: /private/var/folders/60/83wxljbx2vlfbx_hy0yfv8rc0000gn/T/build-via-sdist-myh3v6fy/casatools-6.7.2.39a14607.dev5/src/tools/table/table_cmpt.cc, line: 1399 |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 SEVERE getcellslice::map Exception Reported: Exception: trc must have length of 2. |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const vector<long> &, const String &, const IPosition &, const pair<vector<long>, vector<long>> *const &) at File: /private/var/folders/60/83wxljbx2vlfbx_hy0yfv8rc0000gn/T/build-via-sdist-myh3v6fy/casatools-6.7.2.39a14607.dev5/src/tools/table/table_cmpt.cc, line: 1389 |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 SEVERE getcellslice::map Exception Reported: Exception: All elements of trc must be greater than or equal to 0. |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const vector<long> &, const String &, const IPosition &, const pair<vector<long>, vector<long>> *const &) at File: /private/var/folders/60/83wxljbx2vlfbx_hy0yfv8rc0000gn/T/build-via-sdist-myh3v6fy/casatools-6.7.2.39a14607.dev5/src/tools/table/table_cmpt.cc, line: 1393 |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 SEVERE getcellslice::map Exception Reported: Exception: Element 0 of trc must be less than 3. |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const vector<long> &, const String &, const IPosition &, const pair<vector<long>, vector<long>> *const &) at File: /private/var/folders/60/83wxljbx2vlfbx_hy0yfv8rc0000gn/T/build-via-sdist-myh3v6fy/casatools-6.7.2.39a14607.dev5/src/tools/table/table_cmpt.cc, line: 1399 |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 SEVERE getcellslice::map Exception Reported: Exception: All elements of trc must be greater than or equal to their corresponding blc elements. |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const vector<long> &, const String &, const IPosition &, const pair<vector<long>, vector<long>> *const &) at File: /private/var/folders/60/83wxljbx2vlfbx_hy0yfv8rc0000gn/T/build-via-sdist-myh3v6fy/casatools-6.7.2.39a14607.dev5/src/tools/table/table_cmpt.cc, line: 1409 |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 SEVERE getcellslice::map Exception Reported: Exception: incr must have length of 2. |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 SEVERE getcellslice::map+ ... thrown by casac::variant *casac::table::getcellslice(const std::string &, const long, const std::vector<long> &, const std::vector<long> &, const std::vector<long> &) at File: /private/var/folders/60/83wxljbx2vlfbx_hy0yfv8rc0000gn/T/build-via-sdist-myh3v6fy/casatools-6.7.2.39a14607.dev5/src/tools/table/table_cmpt.cc, line: 1469 |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 SEVERE getcellslice::map Exception Reported: Exception: All elements of incr must be greater than 0. |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 SEVERE getcellslice::map+ ... thrown by casac::variant *casac::table::getcellslice(const std::string &, const long, const std::vector<long> &, const std::vector<long> &, const std::vector<long> &) at File: /private/var/folders/60/83wxljbx2vlfbx_hy0yfv8rc0000gn/T/build-via-sdist-myh3v6fy/casatools-6.7.2.39a14607.dev5/src/tools/table/table_cmpt.cc, line: 1476 |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 INFO name:: No table opened. |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 INFO name:: No table opened. |
| 24-Sep-2025 10:25:37 | test_tool_table.py::table_getcellslice_test::test_exceptions |
| 24-Sep-2025 10:25:37 | Test various exception cases |
| 24-Sep-2025 10:25:37 | PASSED |
| 24-Sep-2025 10:25:37 | |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 INFO ImageFactory::createImage Created Paged image 'tmp.im' of shape [3, 4] with float valued pixels. |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 INFO name:: No table opened. |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 INFO name:: No table opened. |
| 24-Sep-2025 10:25:37 | 2025-09-24 14:25:37 INFO name:: No table opened. |
| 24-Sep-2025 10:25:37 | test_tool_table.py::table_getcellslice_test::test_getcellslice |
| 24-Sep-2025 10:25:37 | tests for valid inputs |
| 24-Sep-2025 10:25:37 | PASSED |
| 24-Sep-2025 10:25:37 | |
| 24-Sep-2025 10:25:37 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_table/nose.xml - |
| 24-Sep-2025 10:25:37 | ======================== 13 passed, 1 warning in 2.60s ========================= |
| 24-Sep-2025 10:25:37 | ============================= test session starts ============================== |
| 24-Sep-2025 10:25:37 | platform darwin -- Python 3.12.8, pytest-8.4.2, pluggy-1.6.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6testenv/bin/python |
| 24-Sep-2025 10:25:37 | cachedir: .pytest_cache |
| 24-Sep-2025 10:25:37 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater |
| 24-Sep-2025 10:25:37 | configfile: pytest.ini |
| 24-Sep-2025 10:25:39 | collecting ... collected 24 items |
| 24-Sep-2025 10:25:39 | |
| 24-Sep-2025 10:25:39 | |
| 24-Sep-2025 10:25:40 | 2025-09-24 14:25:40 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:25:40 | 2025-09-24 14:25:40 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:25:40 | 2025-09-24 14:25:40 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:25:40 | 2025-09-24 14:25:40 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:25:40 | 2025-09-24 14:25:41 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:25:40 | 2025-09-24 14:25:41 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:25:40 | 2025-09-24 14:25:41 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:25:40 | 2025-09-24 14:25:41 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Sep-2025 10:25:40 | 2025-09-24 14:25:41 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Sep-2025 10:25:40 | 2025-09-24 14:25:41 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:40 | 2025-09-24 14:25:41 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 24-Sep-2025 10:25:40 | 2025-09-24 14:25:41 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:25:40 | 2025-09-24 14:25:41 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:41 | 2025-09-24 14:25:42 INFO calibrater::corrupt Finished corrupting. |
| 24-Sep-2025 10:25:41 | 2025-09-24 14:25:42 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:25:41 | test_tool_calibrater.py::calibrater_test::test_activityRecord |
| 24-Sep-2025 10:25:41 | Check that using the calibrater to modify the vis shows in the activity record |
| 24-Sep-2025 10:25:41 | PASSED |
| 24-Sep-2025 10:25:41 | |
| 24-Sep-2025 10:25:41 | 2025-09-24 14:25:42 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:25:41 | 2025-09-24 14:25:42 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:25:41 | 2025-09-24 14:25:42 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:25:41 | 2025-09-24 14:25:42 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:25:42 | 2025-09-24 14:25:42 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:25:42 | 2025-09-24 14:25:42 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:25:42 | 2025-09-24 14:25:42 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:25:42 | 2025-09-24 14:25:42 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Sep-2025 10:25:42 | 2025-09-24 14:25:42 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Sep-2025 10:25:42 | 2025-09-24 14:25:42 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:42 | 2025-09-24 14:25:42 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 24-Sep-2025 10:25:42 | 2025-09-24 14:25:42 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:25:42 | 2025-09-24 14:25:42 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:43 | 2025-09-24 14:25:43 INFO calibrater::corrupt Finished corrupting. |
| 24-Sep-2025 10:25:43 | 2025-09-24 14:25:44 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:25:43 | test_tool_calibrater.py::calibrater_test::test_corruptCal |
| 24-Sep-2025 10:25:43 | Check that the MS is corrupted using the cal table |
| 24-Sep-2025 10:25:43 | PASSED |
| 24-Sep-2025 10:25:43 | |
| 24-Sep-2025 10:25:43 | 2025-09-24 14:25:44 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:25:43 | 2025-09-24 14:25:44 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:25:43 | 2025-09-24 14:25:44 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:25:43 | 2025-09-24 14:25:44 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:25:44 | 2025-09-24 14:25:44 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:25:44 | 2025-09-24 14:25:44 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:25:44 | 2025-09-24 14:25:44 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:25:44 | 2025-09-24 14:25:44 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:25:44 | test_tool_calibrater.py::calibrater_test::test_createEmpty |
| 24-Sep-2025 10:25:44 | Check that an empty cal table can be created |
| 24-Sep-2025 10:25:44 | PASSED |
| 24-Sep-2025 10:25:44 | |
| 24-Sep-2025 10:25:44 | 2025-09-24 14:25:45 INFO name:: No table opened. |
| 24-Sep-2025 10:25:44 | 2025-09-24 14:25:45 INFO showcache:: The Table Cache is empty. |
| 24-Sep-2025 10:25:44 | 2025-09-24 14:25:45 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:25:44 | 2025-09-24 14:25:45 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:25:44 | 2025-09-24 14:25:45 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:25:44 | 2025-09-24 14:25:45 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO name:: No table opened. |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO showcache:: The Table Cache has the following 16 entries: |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO showcache:: 0: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO showcache:: 1: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO showcache:: 2: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO showcache:: 3: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO showcache:: 4: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO showcache:: 5: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO showcache:: 6: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO showcache:: 7: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO showcache:: 8: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO showcache:: 9: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO showcache:: 10: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO showcache:: 11: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO showcache:: 12: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO showcache:: 13: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO showcache:: 14: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO showcache:: 15: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:25:45 | test_tool_calibrater.py::calibrater_test::test_done |
| 24-Sep-2025 10:25:45 | Check that done closes the active calibrator tool |
| 24-Sep-2025 10:25:45 | PASSED |
| 24-Sep-2025 10:25:45 | |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:45 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:46 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:46 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:46 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:46 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Sep-2025 10:25:45 | 2025-09-24 14:25:46 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Sep-2025 10:25:46 | 2025-09-24 14:25:46 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:46 | 2025-09-24 14:25:46 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Sep-2025 10:25:46 | 2025-09-24 14:25:46 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:25:46 | 2025-09-24 14:25:46 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:46 | 2025-09-24 14:25:47 INFO calibrater::correct Finished correcting. |
| 24-Sep-2025 10:25:47 | 2025-09-24 14:25:47 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 24-Sep-2025 10:25:47 | 2025-09-24 14:25:47 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:25:47 | 2025-09-24 14:25:47 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:25:47 | 2025-09-24 14:25:47 INFO calibrater::initcalset Beginning initcalset------------------------ |
| 24-Sep-2025 10:25:47 | 2025-09-24 14:25:47 INFO VisSet::VisSet Initializing MODEL_DATA (to unity) and CORRECTED_DATA (to DATA) |
| 24-Sep-2025 10:25:47 | 2025-09-24 14:25:47 INFO VisSet::VisSet Initialized 328860 rows. |
| 24-Sep-2025 10:25:47 | 2025-09-24 14:25:47 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 24-Sep-2025 10:25:47 | test_tool_calibrater.py::calibrater_test::test_reinitModel |
| 24-Sep-2025 10:25:47 | Check that initcalset will reset the CORRECTED_DATA to unity |
| 24-Sep-2025 10:25:47 | PASSED |
| 24-Sep-2025 10:25:47 | |
| 24-Sep-2025 10:25:47 | 2025-09-24 14:25:48 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:25:47 | 2025-09-24 14:25:48 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:25:47 | 2025-09-24 14:25:48 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:25:47 | 2025-09-24 14:25:48 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO Calibrater::setsolve Arranging to SOLVE: |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO Calibrater::setsolve . Mf Mueller: table=gaincaltest2.ms.G0 append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO calibrater::reset Reseting solve/apply state |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO calibrater::solve Beginning solve----------------------------- |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 SEVERE Calibrater::solve Caught exception: Please run setsolve before attempting to solve. |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO Calibrater::solve Reseting entire solve/apply state. |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 SEVERE Exception Reported: Error in Calibrater::solve. |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO Calibrater::correct2 (VI2/VB2) . (None) |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 SEVERE Calibrater::correct2 (VI2/VB2) Caught exception: Nothing to Apply |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO Calibrater::correct2 (VI2/VB2) Resetting all calibration application settings. |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 SEVERE Exception Reported: Error in Calibrater::correct. |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:25:48 | test_tool_calibrater.py::calibrater_test::test_resetSolveApply |
| 24-Sep-2025 10:25:48 | Check that the reset function can clear set apply and solves |
| 24-Sep-2025 10:25:48 | PASSED |
| 24-Sep-2025 10:25:48 | |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:48 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:25:48 | 2025-09-24 14:25:49 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:25:49 | 2025-09-24 14:25:49 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:25:49 | 2025-09-24 14:25:49 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:25:49 | 2025-09-24 14:25:49 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Sep-2025 10:25:49 | 2025-09-24 14:25:49 INFO calibrater::reset Reseting solve/apply state |
| 24-Sep-2025 10:25:49 | 2025-09-24 14:25:49 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Sep-2025 10:25:49 | 2025-09-24 14:25:49 INFO Calibrater::selectvis+ Selecting on spw: '1' |
| 24-Sep-2025 10:25:49 | 2025-09-24 14:25:49 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
| 24-Sep-2025 10:25:49 | 2025-09-24 14:25:49 INFO Calibrater::selectvis Frequency selection: |
| 24-Sep-2025 10:25:49 | 2025-09-24 14:25:49 INFO Calibrater::selectvis . Spw 1:0~7 (8 channels, step by 1) |
| 24-Sep-2025 10:25:49 | 2025-09-24 14:25:49 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Sep-2025 10:25:49 | 2025-09-24 14:25:49 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:25:49 | test_tool_calibrater.py::calibrater_test::test_returnDict |
| 24-Sep-2025 10:25:49 | Check that the returndict function gives a dictonary with the expected keys |
| 24-Sep-2025 10:25:49 | PASSED |
| 24-Sep-2025 10:25:49 | |
| 24-Sep-2025 10:25:49 | 2025-09-24 14:25:50 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:25:49 | 2025-09-24 14:25:50 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:25:49 | 2025-09-24 14:25:50 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:25:49 | 2025-09-24 14:25:50 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:50 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:50 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:50 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:50 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:50 INFO calibrater::reset Reseting solve/apply state |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:50 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:50 INFO Calibrater::selectvis+ Selecting on antenna/baseline: '0' |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:50 INFO Calibrater::selectvis By selection 328860 rows are reduced to 65772 |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:50 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:50 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:50 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:50 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:50 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:50 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:50 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:50 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:51 INFO calibrater::correct Finished correcting. |
| 24-Sep-2025 10:25:50 | 2025-09-24 14:25:51 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:25:50 | test_tool_calibrater.py::calibrater_test::test_selectVisBaseline |
| 24-Sep-2025 10:25:50 | Check that selectvis properly selects baseline/antenna |
| 24-Sep-2025 10:25:50 | 65772 65772 |
| 24-Sep-2025 10:25:50 | 263088 263088 |
| 24-Sep-2025 10:25:50 | PASSED |
| 24-Sep-2025 10:25:50 | |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:51 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:51 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:51 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:51 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:52 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:52 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:52 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:52 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:52 INFO calibrater::reset Reseting solve/apply state |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:52 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:52 INFO Calibrater::selectvis+ Selecting on field: '0' |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:52 INFO Calibrater::selectvis By selection 328860 rows are reduced to 172260 |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:52 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:52 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:52 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:52 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:52 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:52 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:52 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:25:51 | 2025-09-24 14:25:52 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:52 | 2025-09-24 14:25:52 INFO calibrater::correct Finished correcting. |
| 24-Sep-2025 10:25:52 | 2025-09-24 14:25:52 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:25:52 | test_tool_calibrater.py::calibrater_test::test_selectVisField |
| 24-Sep-2025 10:25:52 | Check that the field is properly selected by selectvis |
| 24-Sep-2025 10:25:52 | PASSED |
| 24-Sep-2025 10:25:52 | |
| 24-Sep-2025 10:25:52 | 2025-09-24 14:25:53 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:25:52 | 2025-09-24 14:25:53 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:25:52 | 2025-09-24 14:25:53 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:25:52 | 2025-09-24 14:25:53 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:25:53 | 2025-09-24 14:25:53 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:25:53 | 2025-09-24 14:25:53 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:25:53 | 2025-09-24 14:25:53 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:25:53 | 2025-09-24 14:25:53 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Sep-2025 10:25:53 | 2025-09-24 14:25:53 INFO calibrater::reset Reseting solve/apply state |
| 24-Sep-2025 10:25:53 | 2025-09-24 14:25:53 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Sep-2025 10:25:53 | 2025-09-24 14:25:53 INFO Calibrater::selectvis+ Selecting on intent: '*AMPLI*' |
| 24-Sep-2025 10:25:53 | 2025-09-24 14:25:53 INFO Calibrater::selectvis Selection did not drop any rows |
| 24-Sep-2025 10:25:53 | 2025-09-24 14:25:53 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 24-Sep-2025 10:25:53 | 2025-09-24 14:25:53 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Sep-2025 10:25:53 | 2025-09-24 14:25:53 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Sep-2025 10:25:53 | 2025-09-24 14:25:53 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Sep-2025 10:25:53 | 2025-09-24 14:25:53 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:53 | 2025-09-24 14:25:53 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Sep-2025 10:25:53 | 2025-09-24 14:25:53 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:25:53 | 2025-09-24 14:25:53 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:54 | 2025-09-24 14:25:54 INFO calibrater::correct Finished correcting. |
| 24-Sep-2025 10:25:54 | 2025-09-24 14:25:54 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:25:54 | test_tool_calibrater.py::calibrater_test::test_selectVisIntent |
| 24-Sep-2025 10:25:54 | Check that the intent is properly selected by selectvis |
| 24-Sep-2025 10:25:54 | PASSED |
| 24-Sep-2025 10:25:54 | |
| 24-Sep-2025 10:25:54 | 2025-09-24 14:25:54 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:25:54 | 2025-09-24 14:25:54 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:25:54 | 2025-09-24 14:25:54 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:25:54 | 2025-09-24 14:25:54 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:25:54 | 2025-09-24 14:25:55 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:25:55 | 2025-09-24 14:25:55 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:25:55 | 2025-09-24 14:25:55 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:25:55 | 2025-09-24 14:25:55 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Sep-2025 10:25:55 | 2025-09-24 14:25:55 INFO calibrater::reset Reseting solve/apply state |
| 24-Sep-2025 10:25:55 | 2025-09-24 14:25:55 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Sep-2025 10:25:55 | 2025-09-24 14:25:55 INFO Calibrater::selectvis+ Selecting by observation IDs: '0' |
| 24-Sep-2025 10:25:55 | 2025-09-24 14:25:55 INFO Calibrater::selectvis By selection 328860 rows are reduced to 318870 |
| 24-Sep-2025 10:25:55 | 2025-09-24 14:25:55 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 24-Sep-2025 10:25:55 | 2025-09-24 14:25:55 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Sep-2025 10:25:55 | 2025-09-24 14:25:55 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Sep-2025 10:25:55 | 2025-09-24 14:25:55 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Sep-2025 10:25:55 | 2025-09-24 14:25:55 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:55 | 2025-09-24 14:25:55 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Sep-2025 10:25:55 | 2025-09-24 14:25:55 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:25:55 | 2025-09-24 14:25:55 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:56 INFO calibrater::correct Finished correcting. |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:56 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:25:56 | test_tool_calibrater.py::calibrater_test::test_selectVisObs |
| 24-Sep-2025 10:25:56 | PASSED |
| 24-Sep-2025 10:25:56 | |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:56 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:56 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:56 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:56 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:57 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:57 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:57 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:57 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:57 INFO calibrater::reset Reseting solve/apply state |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:57 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:57 INFO Calibrater::selectvis+ Selecting on scan: '2' |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:57 INFO Calibrater::selectvis By selection 328860 rows are reduced to 15660 |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:57 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:57 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:57 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:57 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:57 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:57 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:57 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:57 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:56 | 2025-09-24 14:25:57 INFO calibrater::correct Finished correcting. |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:57 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:25:57 | test_tool_calibrater.py::calibrater_test::test_selectVisScan |
| 24-Sep-2025 10:25:57 | Check tht the scan is properly selected by selectvis |
| 24-Sep-2025 10:25:57 | PASSED |
| 24-Sep-2025 10:25:57 | |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:57 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:57 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:57 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:57 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:58 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:58 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:58 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:58 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:58 INFO calibrater::reset Reseting solve/apply state |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:58 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:58 INFO Calibrater::selectvis+ Selecting on spw: '0' |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:58 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:58 INFO Calibrater::selectvis Frequency selection: |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:58 INFO Calibrater::selectvis . Spw 0:0~7 (8 channels, step by 1) |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:58 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:58 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:58 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:58 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:58 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:58 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:25:57 | 2025-09-24 14:25:58 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:58 | 2025-09-24 14:25:58 INFO calibrater::correct Finished correcting. |
| 24-Sep-2025 10:25:58 | 2025-09-24 14:25:58 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:25:58 | test_tool_calibrater.py::calibrater_test::test_selectVisSpw |
| 24-Sep-2025 10:25:58 | Check that spw is properly selected by selectvis |
| 24-Sep-2025 10:25:58 | PASSED |
| 24-Sep-2025 10:25:58 | |
| 24-Sep-2025 10:25:58 | 2025-09-24 14:25:59 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:25:58 | 2025-09-24 14:25:59 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:25:58 | 2025-09-24 14:25:59 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:25:58 | 2025-09-24 14:25:59 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:25:59 | 2025-09-24 14:25:59 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:25:59 | 2025-09-24 14:25:59 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:25:59 | 2025-09-24 14:25:59 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:25:59 | 2025-09-24 14:25:59 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Sep-2025 10:25:59 | 2025-09-24 14:25:59 INFO calibrater::reset Reseting solve/apply state |
| 24-Sep-2025 10:25:59 | 2025-09-24 14:25:59 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Sep-2025 10:25:59 | 2025-09-24 14:25:59 INFO Calibrater::selectvis+ Selecting on time: '>04:38:23' |
| 24-Sep-2025 10:25:59 | 2025-09-24 14:25:59 INFO Calibrater::selectvis By selection 328860 rows are reduced to 313200 |
| 24-Sep-2025 10:25:59 | 2025-09-24 14:25:59 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 24-Sep-2025 10:25:59 | 2025-09-24 14:25:59 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Sep-2025 10:25:59 | 2025-09-24 14:25:59 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Sep-2025 10:25:59 | 2025-09-24 14:25:59 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Sep-2025 10:25:59 | 2025-09-24 14:25:59 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:25:59 | 2025-09-24 14:25:59 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Sep-2025 10:25:59 | 2025-09-24 14:25:59 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:25:59 | 2025-09-24 14:25:59 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:26:00 | 2025-09-24 14:26:00 INFO calibrater::correct Finished correcting. |
| 24-Sep-2025 10:26:00 | 2025-09-24 14:26:00 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:26:00 | test_tool_calibrater.py::calibrater_test::test_selectVisTime |
| 24-Sep-2025 10:26:00 | Check that time is properly selected by selectvis |
| 24-Sep-2025 10:26:00 | PASSED |
| 24-Sep-2025 10:26:00 | |
| 24-Sep-2025 10:26:00 | 2025-09-24 14:26:00 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:26:00 | 2025-09-24 14:26:00 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:26:00 | 2025-09-24 14:26:00 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:26:00 | 2025-09-24 14:26:00 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:26:00 | 2025-09-24 14:26:01 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:26:00 | 2025-09-24 14:26:01 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:26:00 | 2025-09-24 14:26:01 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:26:00 | 2025-09-24 14:26:01 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Sep-2025 10:26:00 | 2025-09-24 14:26:01 INFO calibrater::reset Reseting solve/apply state |
| 24-Sep-2025 10:26:00 | 2025-09-24 14:26:01 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Sep-2025 10:26:00 | 2025-09-24 14:26:01 INFO Calibrater::selectvis+ Selecting on uvrange: '> 500000lambda' |
| 24-Sep-2025 10:26:01 | 2025-09-24 14:26:01 INFO Calibrater::selectvis By selection 328860 rows are reduced to 103321 |
| 24-Sep-2025 10:26:01 | 2025-09-24 14:26:01 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 24-Sep-2025 10:26:01 | 2025-09-24 14:26:01 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Sep-2025 10:26:01 | 2025-09-24 14:26:01 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Sep-2025 10:26:01 | 2025-09-24 14:26:01 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Sep-2025 10:26:01 | 2025-09-24 14:26:01 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:26:01 | 2025-09-24 14:26:01 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Sep-2025 10:26:01 | 2025-09-24 14:26:01 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:26:01 | 2025-09-24 14:26:01 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:26:01 | 2025-09-24 14:26:02 INFO calibrater::correct Finished correcting. |
| 24-Sep-2025 10:26:01 | 2025-09-24 14:26:02 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:26:01 | test_tool_calibrater.py::calibrater_test::test_selectVisUVrange |
| 24-Sep-2025 10:26:01 | Check that selectvis properly selects for uvrange |
| 24-Sep-2025 10:26:01 | PASSED |
| 24-Sep-2025 10:26:01 | |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:02 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:02 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:02 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:02 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:03 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:03 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:03 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:03 INFO calibrater::parsecallibfile Beginning parsecallibfile-)------- |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:03 INFO calibrater::setcallib Beginning setcallib--------- |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:03 INFO Calibrater::setcallib2(callib) Arranging to APPLY: |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:03 INFO . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:03 INFO . 0: |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:03 INFO + MS: obs= scan= fld= intent= spw= |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:03 INFO + CT: tinterp=linear finterp= |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:03 INFO + obsmap=[] scanmap=[] fldmap=[] |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:03 INFO + spwmap=[] antmap=[] |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:03 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:03 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:26:02 | 2025-09-24 14:26:03 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 24-Sep-2025 10:26:03 | 2025-09-24 14:26:03 INFO calibrater::corrupt Finished corrupting. |
| 24-Sep-2025 10:26:03 | 2025-09-24 14:26:04 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:26:03 | test_tool_calibrater.py::calibrater_test::test_setCalLib |
| 24-Sep-2025 10:26:03 | Check that a provided cal table can be used to corrupt the MODEL_DATA |
| 24-Sep-2025 10:26:03 | PASSED |
| 24-Sep-2025 10:26:03 | |
| 24-Sep-2025 10:26:03 | 2025-09-24 14:26:04 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:26:03 | 2025-09-24 14:26:04 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:26:03 | 2025-09-24 14:26:04 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:26:03 | 2025-09-24 14:26:04 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:04 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:04 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:04 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:04 INFO Calibrater::setCorrDepFlags Setting correlation dependent flags = True |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:04 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:26:04 | test_tool_calibrater.py::calibrater_test::test_setCorrDepFlags |
| 24-Sep-2025 10:26:04 | Check that corrdepflags will be checked |
| 24-Sep-2025 10:26:04 | PASSED |
| 24-Sep-2025 10:26:04 | |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:04 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:04 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:04 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:04 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:04 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO calibrater::smooth Beginning smooth--(MSSelection version)------- |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO Calibrater::smooth Beginning smoothing/interpolating method. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 WARN Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/ngc5921.gcal); attempting to update... |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO Calibrater::smooth Storing result in testcalout.cal |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO Writing solutions to table: testcalout.cal |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:26:04 | test_tool_calibrater.py::calibrater_test::test_smoothedCalTables |
| 24-Sep-2025 10:26:04 | Check that the smooth command creates a smoothed cal table |
| 24-Sep-2025 10:26:04 | PASSED |
| 24-Sep-2025 10:26:04 | |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO calibrater::setsolvebandpoly Beginning setsolvebandpoly--(MSSelection version)------- |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO Calibrater::setsolvebandpoly Arranging to SOLVE: |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO Calibrater::setsolvebandpoly . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO calibrater::solve Beginning solve----------------------------- |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO Calibrater::solve . (None) |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO Calibrater::solve . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO Calibrater::solve Solving for BPOLY |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO For solint = inf, found 7 solution intervals. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.059507/0.0681762/0.0765806 |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.33653/0.750193/1.6779 |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0630839/0.0689061/0.0756384 |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.279482/0.74979/1.59355 |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0672607/0.089081/0.111106 |
| 24-Sep-2025 10:26:04 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.31075/3.32219/4.29305 |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0652822/0.0889198/0.116912 |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.44269/3.26616/4.3519 |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350681/0.587724/0.894558 |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:05 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:06 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.296/59.0077/111.454 |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:06 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:06 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.354236/0.581733/0.988903 |
| 24-Sep-2025 10:26:05 | 2025-09-24 14:26:06 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 17.2419/56.3249/117.264 |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0850169/0.113968/0.15276 |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.67561/5.33243/8.17296 |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0784237/0.114345/0.159908 |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.46392/5.27232/7.20673 |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0703936/0.102501/0.131676 |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.98728/4.47977/5.84264 |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0751114/0.102994/0.138529 |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.18629/4.47068/5.89411 |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350626/0.604424/0.974388 |
| 24-Sep-2025 10:26:06 | 2025-09-24 14:26:07 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Sep-2025 10:26:07 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.2542/59.3511/120.719 |
| 24-Sep-2025 10:26:07 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Sep-2025 10:26:07 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.382806/0.598119/0.941571 |
| 24-Sep-2025 10:26:07 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 20.0637/57.2112/118.101 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0750931/0.0978998/0.125897 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.72933/3.98787/5.33715 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0658572/0.0972125/0.140794 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:08 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.97943/3.97841/5.72903 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO Calibrater::solve Found good BPOLY solutions in 7 slots. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO calibrater::solve Finished solving. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 24-Sep-2025 10:26:08 | test_tool_calibrater.py::calibrater_test::test_solveBandpass |
| 24-Sep-2025 10:26:08 | Check that solve band poly creates the output table |
| 24-Sep-2025 10:26:08 | PASSED |
| 24-Sep-2025 10:26:08 | |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO calibrater::setsolvegainspline Beginning setsolvegainspline--(MSSelection version)------- |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO Calibrater::setsolvegainspline Arranging to SOLVE: |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO Calibrater::setsolvegainspline . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO calibrater::solve Beginning solve----------------------------- |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO Calibrater::solve . (None) |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO Calibrater::solve . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO GJonesSpline::solve() Fitting time-dependent cubic splines. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO GJonesSpline::solve() Solving for phase splines with splinetime= 10800 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO GJonesSpline::solve() Solving for amplitude splines with splinetime= 10800 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO GJonesSpline::solve() Accumulating data for: field= 1331+30500002_0, spw= 0, nchan= 63 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO GJonesSpline::solve() Number of timestamps in data = 60 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO GJonesSpline::solve() Number of cubic spline control points = 4 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO GJonesSpline::solve() Number of cubic spline knots = 8 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO GJonesSpline::solve() Number of cubic spline segments = 1 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO GJonesSpline::solve() Fitting amplitude spline. |
| 24-Sep-2025 10:26:08 | test_tool_calibrater.py::calibrater_test::test_solveGainspline DPBTRF ;problem leading minor 23 |
| 24-Sep-2025 10:26:08 | DPBTRF ;problem leading minor 23 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO GJonesSpline::solve() Fitting phase spline. |
| 24-Sep-2025 10:26:08 | DPBTRF ;problem leading minor 22 |
| 24-Sep-2025 10:26:08 | DPBTRF ;problem leading minor 22 |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 INFO calibrater::solve Finished solving. |
| 24-Sep-2025 10:26:08 | 2025-09-24 14:26:09 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 24-Sep-2025 10:26:08 | |
| 24-Sep-2025 10:26:08 | Check that solve gain spline creates the output table |
| 24-Sep-2025 10:26:08 | PASSED |
| 24-Sep-2025 10:26:08 | |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:09 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:09 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:09 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:09 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:10 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:10 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:10 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:10 INFO calibrater::specifycal Beginning specifycal----------------------- |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:10 INFO Creating G Jones table from specified parameters. |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:10 INFO Generating 'G' corrections. |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:10 INFO Specified parameter(s) (per spw and pol) repeated on all antennas. |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:10 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations. |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:10 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9]) |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:10 INFO Writing solutions to table: testcalout.cal |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:10 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:26:09 | test_tool_calibrater.py::calibrater_test::test_specifyCal |
| 24-Sep-2025 10:26:09 | Check that specifycal can set values for specific spws and antennas |
| 24-Sep-2025 10:26:09 | PASSED |
| 24-Sep-2025 10:26:09 | |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:10 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:10 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:10 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:10 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:26:09 | 2025-09-24 14:26:10 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:10 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:10 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:10 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:10 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:10 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:11 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:11 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:11 INFO Calibrater::setsolve Arranging to SOLVE: |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:11 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:11 INFO Calibrater::state The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:11 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:11 INFO Calibrater::state The following calibration term is arranged for solve: |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:11 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:11 INFO calibrater::solve Beginning solve----------------------------- |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:11 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:11 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:11 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:11 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:11 INFO Solving for Mf Mueller |
| 24-Sep-2025 10:26:10 | 2025-09-24 14:26:11 INFO For solint = inf, found 84 solution intervals. |
| 24-Sep-2025 10:26:11 | 2025-09-24 14:26:11 INFO Found good Mf Mueller solutions in 84 intervals. |
| 24-Sep-2025 10:26:11 | 2025-09-24 14:26:11 INFO Writing solutions to table: output.ms |
| 24-Sep-2025 10:26:11 | 2025-09-24 14:26:11 INFO calibrater::solve Finished solving. |
| 24-Sep-2025 10:26:11 | 2025-09-24 14:26:11 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 24-Sep-2025 10:26:11 | test_tool_calibrater.py::calibrater_test::test_standardPath |
| 24-Sep-2025 10:26:11 | open setapply setsolve state solve close |
| 24-Sep-2025 10:26:11 | PASSED |
| 24-Sep-2025 10:26:11 | |
| 24-Sep-2025 10:26:11 | 2025-09-24 14:26:11 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:26:11 | 2025-09-24 14:26:11 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:26:11 | 2025-09-24 14:26:11 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:26:11 | 2025-09-24 14:26:11 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:26:11 | 2025-09-24 14:26:12 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO name:: No table opened. |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: The Table Cache has the following 16 entries: |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: 0: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: 1: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: 2: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: 3: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: 4: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: 5: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: 6: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: 7: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: 8: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: 9: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: 10: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: 11: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: 12: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: 13: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: 14: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: 15: "/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO name:: No table opened. |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO showcache:: The Table Cache is empty. |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:26:12 | test_tool_calibrater.py::calibrater_test::test_takesMs |
| 24-Sep-2025 10:26:12 | Check that the calibrater tool can open and close an MS |
| 24-Sep-2025 10:26:12 | PASSED |
| 24-Sep-2025 10:26:12 | |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO Clearing all model records in MS header. |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:12 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:13 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:13 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:13 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:13 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:13 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:13 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:13 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:13 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Sep-2025 10:26:12 | 2025-09-24 14:26:13 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Sep-2025 10:26:13 | 2025-09-24 14:26:14 INFO calibrater::correct Finished correcting. |
| 24-Sep-2025 10:26:13 | 2025-09-24 14:26:14 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Sep-2025 10:26:13 | test_tool_calibrater.py::calibrater_test::test_writeToCorrected |
| 24-Sep-2025 10:26:13 | Check that the tool writes to the CORRECTED_DATA column |
| 24-Sep-2025 10:26:13 | PASSED |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml - |
| 24-Sep-2025 10:26:13 | ======================== 24 passed, 1 warning in 36.36s ======================== |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calanalysis/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calanalysis |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_calanalysis/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calanalysis/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_quanta/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_quanta |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_quanta/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_quanta/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_synthesisutils/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_synthesisutils |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_synthesisutils/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_synthesisutils/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_simulator/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_simulator |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_simulator/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_simulator/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_ms_statwt |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_ms_statwt/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_ms/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_ms |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_ms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_ms/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_rebin |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_image_rebin/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_transpose |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_image_transpose/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_subimage/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_subimage |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_image_subimage/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_subimage/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_msmetadata |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_msmetadata/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_image/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_deviation |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_image_deviation/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_regrid |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_image_regrid/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_imagepol |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_vpmanager |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_vpmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_measures/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_measures |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_measures/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_measures/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_componentlist |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_componentlist/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_ms_createmultims |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_ms_createmultims/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_pv |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_image_pv/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_fitprofile |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_image_fitprofile/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_sdm |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_sdm/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_regionmanager/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_regionmanager |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_regionmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_regionmanager/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_table/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_table |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_table/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_table/ |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 24-Sep-2025 10:26:13 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater |
| 24-Sep-2025 10:26:13 | |
| 24-Sep-2025 10:26:13 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 24-Sep-2025 10:26:13 | Finished task 'Test wheel' with result: Success |
| 24-Sep-2025 10:26:13 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
| 24-Sep-2025 10:26:13 | Parsing test results under /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312... |
| 24-Sep-2025 10:26:14 | Finished task 'Parse tests' with result: Success |
| 24-Sep-2025 10:26:14 | Starting task 'Upload wheels' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
| 24-Sep-2025 10:26:14 | Beginning to execute external process for build 'CASASPECS - Dev Test 3.12 - CAS-14607 - Test Tools macOS 15 Py3.12 #2 (CASASPECS-DEVTESTPY31231-TTOARM15P312-2)' ... running command line: /Users/casaci/bamboohome/temp/CASASPECS-DEVTESTPY31231-TTOARM15P312-2-ScriptBuildTask-13410791183280286441.sh ... in: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312 |
| 24-Sep-2025 10:26:14 | Cloning into 'casa-build-utils'... |
| 24-Sep-2025 10:26:42 | /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312 |
| 24-Sep-2025 10:26:44 | Collecting twine |
| 24-Sep-2025 10:26:44 | Using cached twine-6.2.0-py3-none-any.whl (42 kB) |
| 24-Sep-2025 10:26:44 | Collecting keyring>=21.2.0 |
| 24-Sep-2025 10:26:44 | Using cached keyring-25.6.0-py3-none-any.whl (39 kB) |
| 24-Sep-2025 10:26:44 | Collecting requests-toolbelt!=0.9.0,>=0.8.0 |
| 24-Sep-2025 10:26:44 | Using cached requests_toolbelt-1.0.0-py2.py3-none-any.whl (54 kB) |
| 24-Sep-2025 10:26:44 | Collecting requests>=2.20 |
| 24-Sep-2025 10:26:44 | Using cached requests-2.32.5-py3-none-any.whl (64 kB) |
| 24-Sep-2025 10:26:44 | Collecting urllib3>=1.26.0 |
| 24-Sep-2025 10:26:44 | Using cached urllib3-2.5.0-py3-none-any.whl (129 kB) |
| 24-Sep-2025 10:26:45 | Collecting importlib-metadata>=3.6 |
| 24-Sep-2025 10:26:45 | Using cached importlib_metadata-8.7.0-py3-none-any.whl (27 kB) |
| 24-Sep-2025 10:26:45 | Collecting packaging>=24.0 |
| 24-Sep-2025 10:26:45 | Using cached packaging-25.0-py3-none-any.whl (66 kB) |
| 24-Sep-2025 10:26:45 | Collecting readme-renderer>=35.0 |
| 24-Sep-2025 10:26:45 | Using cached readme_renderer-44.0-py3-none-any.whl (13 kB) |
| 24-Sep-2025 10:26:45 | Collecting id |
| 24-Sep-2025 10:26:45 | Using cached id-1.5.0-py3-none-any.whl (13 kB) |
| 24-Sep-2025 10:26:45 | Collecting rich>=12.0.0 |
| 24-Sep-2025 10:26:45 | Using cached rich-14.1.0-py3-none-any.whl (243 kB) |
| 24-Sep-2025 10:26:45 | Collecting rfc3986>=1.4.0 |
| 24-Sep-2025 10:26:45 | Using cached rfc3986-2.0.0-py2.py3-none-any.whl (31 kB) |
| 24-Sep-2025 10:26:45 | Collecting zipp>=3.20 |
| 24-Sep-2025 10:26:45 | Using cached zipp-3.23.0-py3-none-any.whl (10 kB) |
| 24-Sep-2025 10:26:45 | Collecting jaraco.functools |
| 24-Sep-2025 10:26:45 | Using cached jaraco_functools-4.3.0-py3-none-any.whl (10 kB) |
| 24-Sep-2025 10:26:45 | Collecting jaraco.context |
| 24-Sep-2025 10:26:45 | Using cached jaraco.context-6.0.1-py3-none-any.whl (6.8 kB) |
| 24-Sep-2025 10:26:45 | Collecting jaraco.classes |
| 24-Sep-2025 10:26:45 | Using cached jaraco.classes-3.4.0-py3-none-any.whl (6.8 kB) |
| 24-Sep-2025 10:26:45 | Collecting Pygments>=2.5.1 |
| 24-Sep-2025 10:26:45 | Using cached pygments-2.19.2-py3-none-any.whl (1.2 MB) |
| 24-Sep-2025 10:26:45 | Collecting docutils>=0.21.2 |
| 24-Sep-2025 10:26:45 | Using cached docutils-0.22.2-py3-none-any.whl (632 kB) |
| 24-Sep-2025 10:26:45 | Collecting nh3>=0.2.14 |
| 24-Sep-2025 10:26:45 | Using cached nh3-0.3.0-cp38-abi3-macosx_10_12_x86_64.macosx_11_0_arm64.macosx_10_12_universal2.whl (1.4 MB) |
| 24-Sep-2025 10:26:45 | Collecting charset_normalizer<4,>=2 |
| 24-Sep-2025 10:26:45 | Using cached charset_normalizer-3.4.3-cp39-cp39-macosx_10_9_universal2.whl (207 kB) |
| 24-Sep-2025 10:26:45 | Collecting idna<4,>=2.5 |
| 24-Sep-2025 10:26:45 | Using cached idna-3.10-py3-none-any.whl (70 kB) |
| 24-Sep-2025 10:26:45 | Collecting certifi>=2017.4.17 |
| 24-Sep-2025 10:26:45 | Using cached certifi-2025.8.3-py3-none-any.whl (161 kB) |
| 24-Sep-2025 10:26:45 | Collecting markdown-it-py>=2.2.0 |
| 24-Sep-2025 10:26:45 | Using cached markdown_it_py-3.0.0-py3-none-any.whl (87 kB) |
| 24-Sep-2025 10:26:45 | Collecting mdurl~=0.1 |
| 24-Sep-2025 10:26:45 | Using cached mdurl-0.1.2-py3-none-any.whl (10.0 kB) |
| 24-Sep-2025 10:26:45 | Collecting more-itertools |
| 24-Sep-2025 10:26:45 | Using cached more_itertools-10.8.0-py3-none-any.whl (69 kB) |
| 24-Sep-2025 10:26:45 | Collecting backports.tarfile |
| 24-Sep-2025 10:26:45 | Using cached backports.tarfile-1.2.0-py3-none-any.whl (30 kB) |
| 24-Sep-2025 10:26:46 | Installing collected packages: zipp, urllib3, more-itertools, mdurl, idna, charset-normalizer, certifi, backports.tarfile, requests, Pygments, nh3, markdown-it-py, jaraco.functools, jaraco.context, jaraco.classes, importlib-metadata, docutils, rich, rfc3986, requests-toolbelt, readme-renderer, packaging, keyring, id, twine |
| 24-Sep-2025 10:26:47 | Successfully installed Pygments-2.19.2 backports.tarfile-1.2.0 certifi-2025.8.3 charset-normalizer-3.4.3 docutils-0.22.2 id-1.5.0 idna-3.10 importlib-metadata-8.7.0 jaraco.classes-3.4.0 jaraco.context-6.0.1 jaraco.functools-4.3.0 keyring-25.6.0 markdown-it-py-3.0.0 mdurl-0.1.2 more-itertools-10.8.0 nh3-0.3.0 packaging-25.0 readme-renderer-44.0 requests-2.32.5 requests-toolbelt-1.0.0 rfc3986-2.0.0 rich-14.1.0 twine-6.2.0 urllib3-2.5.0 zipp-3.23.0 |
| 24-Sep-2025 10:26:47 | WARNING: You are using pip version 21.2.4; however, version 25.2 is available. |
| 24-Sep-2025 10:26:47 | You should consider upgrading via the '/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/wheeldirectory/casa6testenv/bin/python3 -m pip install --upgrade pip' command. |
| 24-Sep-2025 10:26:47 | /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312/wheeldirectory/casa6testenv/lib/python3.9/site-packages/urllib3/__init__.py:35: NotOpenSSLWarning: urllib3 v2 only supports OpenSSL 1.1.1+, currently the 'ssl' module is compiled with 'LibreSSL 2.8.3'. See: https://github.com/urllib3/urllib3/issues/3020 |
| 24-Sep-2025 10:26:47 | warnings.warn( |
| 24-Sep-2025 10:26:47 | Uploading distributions to |
| 24-Sep-2025 10:26:47 | https://casa-pip.nrao.edu:443/repository/casa-dev-wheel/ |
| 24-Sep-2025 10:26:47 | Uploading casatools-6.7.2.39a14607.dev5-cp312-cp312-macosx_15_0_arm64.whl |
| 24-Sep-2025 10:26:47 | |
| 24-Sep-2025 10:26:47 | 0% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 0.0/72.0 MB • --:-- • ? |
| 24-Sep-2025 10:26:47 | 10% ━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 7.2/72.0 MB • 00:01 • 87.1 MB/s |
| 24-Sep-2025 10:26:48 | 20% ━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 14.5/72.0 MB • 00:01 • 85.7 MB/s |
| 24-Sep-2025 10:26:48 | 26% ━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 18.4/72.0 MB • 00:01 • 63.9 MB/s |
| 24-Sep-2025 10:26:48 | 31% ━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━ 22.1/72.0 MB • 00:02 • 49.4 MB/s |
| 24-Sep-2025 10:26:48 | 35% ━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━ 25.3/72.0 MB • 00:02 • 39.2 MB/s |
| 24-Sep-2025 10:26:48 | 39% ━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━ 28.4/72.0 MB • 00:02 • 35.5 MB/s |
| 24-Sep-2025 10:26:48 | 43% ━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━ 30.6/72.0 MB • 00:02 • 30.5 MB/s |
| 24-Sep-2025 10:26:48 | 45% ━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━ 32.3/72.0 MB • 00:02 • 27.7 MB/s |
| 24-Sep-2025 10:26:48 | 50% ━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━ 35.9/72.0 MB • 00:02 • 25.9 MB/s |
| 24-Sep-2025 10:26:48 | 54% ━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━ 38.6/72.0 MB • 00:02 • 25.6 MB/s |
| 24-Sep-2025 10:26:49 | 57% ━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━ 40.9/72.0 MB • 00:02 • 25.4 MB/s |
| 24-Sep-2025 10:26:49 | 61% ━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━ 43.7/72.0 MB • 00:02 • 23.5 MB/s |
| 24-Sep-2025 10:26:49 | 68% ━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━ 49.3/72.0 MB • 00:01 • 30.2 MB/s |
| 24-Sep-2025 10:26:49 | 73% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━ 52.9/72.0 MB • 00:01 • 33.5 MB/s |
| 24-Sep-2025 10:26:49 | 78% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━ 55.9/72.0 MB • 00:01 • 33.4 MB/s |
| 24-Sep-2025 10:26:49 | 84% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━ 60.6/72.0 MB • 00:01 • 37.5 MB/s |
| 24-Sep-2025 10:26:49 | 88% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━ 63.1/72.0 MB • 00:01 • 36.0 MB/s |
| 24-Sep-2025 10:26:49 | 89% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━ 63.8/72.0 MB • 00:01 • 29.3 MB/s |
| 24-Sep-2025 10:26:50 | 91% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━ 65.5/72.0 MB • 00:01 • 24.2 MB/s |
| 24-Sep-2025 10:26:50 | 95% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━ 68.2/72.0 MB • 00:01 • 23.1 MB/s |
| 24-Sep-2025 10:26:50 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸ 71.8/72.0 MB • 00:01 • 22.1 MB/s |
| 24-Sep-2025 10:26:50 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 72.0/72.0 MB • 00:02 • 22.9 MB/s |
| 24-Sep-2025 10:26:50 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 72.0/72.0 MB • 00:02 • 22.9 MB/s |
| 24-Sep-2025 10:26:50 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 72.0/72.0 MB • 00:02 • 22.9 MB/s |
| 24-Sep-2025 10:26:50 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 72.0/72.0 MB • 00:02 • 22.9 MB/s |
| 24-Sep-2025 10:26:50 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 72.0/72.0 MB • 00:02 • 22.9 MB/s |
| 24-Sep-2025 10:26:50 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 72.0/72.0 MB • 00:02 • 22.9 MB/s |
| 24-Sep-2025 10:26:50 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 72.0/72.0 MB • 00:02 • 22.9 MB/s |
| 24-Sep-2025 10:26:50 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 72.0/72.0 MB • 00:02 • 22.9 MB/s |
| 24-Sep-2025 10:26:50 | /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY31231-TTOARM15P312 |
| 24-Sep-2025 10:26:50 | Finished task 'Upload wheels' with result: Success |
| 24-Sep-2025 10:26:50 | Running post build plugin 'Docker Container Cleanup' |
| 24-Sep-2025 10:26:51 | Running post build plugin 'NCover Results Collector' |
| 24-Sep-2025 10:26:51 | Running post build plugin 'Build Results Label Collector' |
| 24-Sep-2025 10:26:51 | Running post build plugin 'Clover Results Collector' |
| 24-Sep-2025 10:26:51 | Running post build plugin 'npm Cache Cleanup' |
| 24-Sep-2025 10:26:51 | Running post build plugin 'Artifact Copier' |
| 24-Sep-2025 10:26:51 | Finalising the build... |
| 24-Sep-2025 10:26:51 | Stopping timer. |
| 24-Sep-2025 10:26:51 | Build CASASPECS-DEVTESTPY31231-TTOARM15P312-2 completed. |
| 24-Sep-2025 10:26:51 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
| 24-Sep-2025 10:26:51 | Running on server: post build plugin 'NCover Results Collector' |
| 24-Sep-2025 10:26:51 | Running on server: post build plugin 'Build Labeller' |
| 24-Sep-2025 10:26:51 | Running on server: post build plugin 'Clover Delta Calculator' |
| 24-Sep-2025 10:26:51 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
| 24-Sep-2025 10:26:51 | All post build plugins have finished |
| 24-Sep-2025 10:26:51 | Generating build results summary... |
| 24-Sep-2025 10:26:51 | Saving build results to disk... |
| 24-Sep-2025 10:26:51 | Store variable context... |
| 24-Sep-2025 10:26:51 | Finished building CASASPECS-DEVTESTPY31231-TTOARM15P312-2. |