Build: #2 was successful
Job: Test Tasks macOS 15 Py3.12 was successful
Build log
The build generated 6,405 lines of output. The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
| 07-Oct-2026 18:25:02 | refim_point_linRL |
| 07-Oct-2026 18:25:02 | PASSED |
| 07-Oct-2026 18:25:02 | |
| 07-Oct-2026 18:25:02 | 2026-10-07 22:25:03 WARN tclean::task_tclean::casa For specmode='mfs' and deconvolver='mtmfs', the option of pbcor=True divides each restored Taylor coefficient image by the pb.tt0 image. This correction ignores the frequency-dependence of the primary beam and does not correct for PB spectral index. It is scientifically valid only for small fractional bandwidths. For more accurate wideband primary beam correction (if needed), please use one of the following options : (1) specmode='mvc' with gridder='standard' or 'mosaic' with pbcor=True, (2) conjbeams=True and wbawp=True with gridder='awproject' and pbcor=True. |
| 07-Oct-2026 18:25:03 | test_task_deconvolve.py::test_stokes::test_stokes_mtmfs_IQUV |
| 07-Oct-2026 18:25:03 | [stokes] test_stokes_mtmfs_IQUV |
| 07-Oct-2026 18:25:03 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:03 | refim_point_linRL |
| 07-Oct-2026 18:25:03 | PASSED |
| 07-Oct-2026 18:25:03 | |
| 07-Oct-2026 18:25:05 | test_task_deconvolve.py::test_cube::test_cube_0 |
| 07-Oct-2026 18:25:05 | [cube] test_cube_0 |
| 07-Oct-2026 18:25:05 | : channel, default start and width, LSRK |
| 07-Oct-2026 18:25:05 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:05 | refim_point |
| 07-Oct-2026 18:25:05 | [check_spec_frame] tst.image: Spec frame is LSRK with crval 999988750.3872563 (Pass : should be LSRK with expected crval 999988750 ) |
| 07-Oct-2026 18:25:05 | PASSED |
| 07-Oct-2026 18:25:05 | |
| 07-Oct-2026 18:25:07 | test_task_deconvolve.py::test_cube::test_cube_1 |
| 07-Oct-2026 18:25:07 | [cube] test_cube_1 |
| 07-Oct-2026 18:25:07 | : channel, default start and width, TOPO |
| 07-Oct-2026 18:25:07 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:07 | refim_point |
| 07-Oct-2026 18:25:07 | PASSED |
| 07-Oct-2026 18:25:07 | |
| 07-Oct-2026 18:25:09 | test_task_deconvolve.py::test_cube::test_cube_10 |
| 07-Oct-2026 18:25:09 | [cube] test_cube_10 |
| 07-Oct-2026 18:25:09 | : velocity, default start, width='-23983.4m/s', TOPO |
| 07-Oct-2026 18:25:09 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:09 | refim_point |
| 07-Oct-2026 18:25:09 | PASSED |
| 07-Oct-2026 18:25:09 | |
| 07-Oct-2026 18:25:10 | 2026-10-07 22:25:10 WARN SIImageStore::getPSFGaussian (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2136) PSF is blank for[C5:P0] [C6:P0] [C7:P0] [C8:P0] [C9:P0] |
| 07-Oct-2026 18:25:11 | test_task_deconvolve.py::test_cube::test_cube_11 |
| 07-Oct-2026 18:25:11 | [cube] test_cube_11 |
| 07-Oct-2026 18:25:11 | : velocity, start='11991.7km/s', default width, TOPO |
| 07-Oct-2026 18:25:11 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:11 | refim_point |
| 07-Oct-2026 18:25:11 | PASSED |
| 07-Oct-2026 18:25:11 | |
| 07-Oct-2026 18:25:11 | 2026-10-07 22:25:12 WARN SIImageStore::getPSFGaussian (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2136) PSF is blank for[C5:P0] [C6:P0] [C7:P0] [C8:P0] [C9:P0] |
| 07-Oct-2026 18:25:12 | test_task_deconvolve.py::test_cube::test_cube_12 |
| 07-Oct-2026 18:25:12 | [cube] test_cube_12 |
| 07-Oct-2026 18:25:12 | : velocity, start='11977.6km/s', default width, BARY |
| 07-Oct-2026 18:25:12 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:12 | refim_point |
| 07-Oct-2026 18:25:12 | PASSED |
| 07-Oct-2026 18:25:12 | |
| 07-Oct-2026 18:25:13 | 2026-10-07 22:25:14 WARN SIImageStore::getPSFGaussian (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2136) PSF is blank for[C1:P0] [C4:P0] [C5:P0] [C6:P0] [C7:P0] |
| 07-Oct-2026 18:25:14 | test_task_deconvolve.py::test_cube::test_cube_13 |
| 07-Oct-2026 18:25:14 | [cube] test_cube_13 |
| 07-Oct-2026 18:25:14 | : velocity, start='-41347.5km/s', default width , veltype=optical LSRK |
| 07-Oct-2026 18:25:14 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:14 | refim_point |
| 07-Oct-2026 18:25:14 | PASSED |
| 07-Oct-2026 18:25:14 | |
| 07-Oct-2026 18:25:16 | test_task_deconvolve.py::test_cube::test_cube_14 |
| 07-Oct-2026 18:25:16 | [cube] test_cube_14 |
| 07-Oct-2026 18:25:16 | : frequency, start(quanity)={'unit': 'GHz', 'value': 1.2}, default width, veltype=radio LSRK |
| 07-Oct-2026 18:25:16 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:16 | refim_point |
| 07-Oct-2026 18:25:16 | PASSED |
| 07-Oct-2026 18:25:16 | |
| 07-Oct-2026 18:25:18 | test_task_deconvolve.py::test_cube::test_cube_15 |
| 07-Oct-2026 18:25:18 | [cube] test_cube_15 |
| 07-Oct-2026 18:25:18 | : frequency, start={'m0': {'unit': 'Hz', 'value': 1199989000.0}, 'refer': 'LSRK', 'type': 'frequency'}, default width, veltype=radio LSRK |
| 07-Oct-2026 18:25:18 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:18 | refim_point |
| 07-Oct-2026 18:25:18 | PASSED |
| 07-Oct-2026 18:25:18 | |
| 07-Oct-2026 18:25:18 | 2026-10-07 22:25:19 WARN SIImageStore::getPSFGaussian (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2136) PSF is blank for[C5:P0] [C6:P0] [C7:P0] [C8:P0] [C9:P0] |
| 07-Oct-2026 18:25:19 | test_task_deconvolve.py::test_cube::test_cube_16 |
| 07-Oct-2026 18:25:19 | [cube] test_cube_16 |
| 07-Oct-2026 18:25:19 | : velocity(quantity), start={'unit': 'km/s', 'value': 11991.7}, default width, TOPO |
| 07-Oct-2026 18:25:19 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:19 | refim_point |
| 07-Oct-2026 18:25:19 | PASSED |
| 07-Oct-2026 18:25:19 | |
| 07-Oct-2026 18:25:19 | The frame in start:BARY Override frame=TOPO |
| 07-Oct-2026 18:25:19 | The frame in start:BARY Override frame=TOPO |
| 07-Oct-2026 18:25:20 | 2026-10-07 22:25:21 WARN SIImageStore::getPSFGaussian (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2136) PSF is blank for[C5:P0] [C6:P0] [C7:P0] [C8:P0] [C9:P0] |
| 07-Oct-2026 18:25:20 | The frame in start:BARY Override frame=TOPO |
| 07-Oct-2026 18:25:21 | test_task_deconvolve.py::test_cube::test_cube_17 |
| 07-Oct-2026 18:25:21 | [cube] test_cube_17 |
| 07-Oct-2026 18:25:21 | : velocity(measure), start={'m0': {'unit': 'm/s', 'value': 11977600.0}, 'refer': 'BARY', 'type': 'radialvelocity'}, default width(outframe=TOPO will be overridden) |
| 07-Oct-2026 18:25:21 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:21 | refim_point |
| 07-Oct-2026 18:25:21 | PASSED |
| 07-Oct-2026 18:25:21 | |
| 07-Oct-2026 18:25:23 | test_task_deconvolve.py::test_cube::test_cube_18 |
| 07-Oct-2026 18:25:23 | [cube] test_cube_18 |
| 07-Oct-2026 18:25:23 | : velocity, default start, width(quantity)={'unit': 'km/s', 'value': 11991.7} |
| 07-Oct-2026 18:25:23 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:23 | refim_point |
| 07-Oct-2026 18:25:23 | PASSED |
| 07-Oct-2026 18:25:23 | |
| 07-Oct-2026 18:25:25 | test_task_deconvolve.py::test_cube::test_cube_19 |
| 07-Oct-2026 18:25:25 | [cube] test_cube_19 |
| 07-Oct-2026 18:25:25 | : velocity, default start, width(measure)={'m0': {'unit': 'm/s', 'value': 11991700.0}, 'refer': 'TOPO', 'type': 'radialvelocity'}, TOPO |
| 07-Oct-2026 18:25:25 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:25 | refim_point |
| 07-Oct-2026 18:25:25 | PASSED |
| 07-Oct-2026 18:25:25 | |
| 07-Oct-2026 18:25:27 | test_task_deconvolve.py::test_cube::test_cube_2 |
| 07-Oct-2026 18:25:27 | [cube] test_cube_2 |
| 07-Oct-2026 18:25:27 | : channel, default start, width=2, LSRK |
| 07-Oct-2026 18:25:27 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:27 | refim_point |
| 07-Oct-2026 18:25:27 | PASSED |
| 07-Oct-2026 18:25:27 | |
| 07-Oct-2026 18:25:27 | 2026-10-07 22:25:28 WARN SIImageStore::getPSFGaussian (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2136) PSF is blank for[C5:P0] [C6:P0] [C7:P0] [C8:P0] [C9:P0] |
| 07-Oct-2026 18:25:28 | test_task_deconvolve.py::test_cube::test_cube_20 |
| 07-Oct-2026 18:25:28 | [cube] test_cube_20 |
| 07-Oct-2026 18:25:28 | : doppler, start={'m0': {'unit': 'm/s', 'value': 11994336.49363042}, 'refer': 'RADIO', 'type': 'doppler'}, default width, LSRK |
| 07-Oct-2026 18:25:28 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:28 | refim_point |
| 07-Oct-2026 18:25:28 | PASSED |
| 07-Oct-2026 18:25:28 | |
| 07-Oct-2026 18:25:29 | 2026-10-07 22:25:30 WARN SIImageStore::getPSFGaussian (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2136) PSF is blank for[C6:P0] [C7:P0] |
| 07-Oct-2026 18:25:30 | test_task_deconvolve.py::test_cube::test_cube_21 |
| 07-Oct-2026 18:25:30 | [cube] test_cube_21 |
| 07-Oct-2026 18:25:30 | : channel, start=4, default width, channel gap (10-11) LSRK |
| 07-Oct-2026 18:25:30 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:30 | refim_point |
| 07-Oct-2026 18:25:30 | PASSED |
| 07-Oct-2026 18:25:30 | |
| 07-Oct-2026 18:25:32 | test_task_deconvolve.py::test_cube::test_cube_22 |
| 07-Oct-2026 18:25:32 | [cube] test_cube_22 |
| 07-Oct-2026 18:25:32 | : channel, start=0, default width, step=2 LSRK nearest |
| 07-Oct-2026 18:25:32 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:32 | refim_point |
| 07-Oct-2026 18:25:32 | PASSED |
| 07-Oct-2026 18:25:32 | |
| 07-Oct-2026 18:25:34 | test_task_deconvolve.py::test_cube::test_cube_23 |
| 07-Oct-2026 18:25:34 | [cube] test_cube_23 |
| 07-Oct-2026 18:25:34 | : spw with channel selection( 0:4~13 ), default start, LSRK nearest |
| 07-Oct-2026 18:25:34 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:34 | refim_point |
| 07-Oct-2026 18:25:34 | PASSED |
| 07-Oct-2026 18:25:34 | |
| 07-Oct-2026 18:25:36 | test_task_deconvolve.py::test_cube::test_cube_3 |
| 07-Oct-2026 18:25:36 | [cube] test_cube_3 |
| 07-Oct-2026 18:25:36 | : channel, start=5, default width, LSRK |
| 07-Oct-2026 18:25:36 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:36 | refim_point |
| 07-Oct-2026 18:25:36 | PASSED |
| 07-Oct-2026 18:25:36 | |
| 07-Oct-2026 18:25:37 | 2026-10-07 22:25:37 WARN SIImageStore::getPSFGaussian (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2136) PSF is blank for[C0:P0] [C1:P0] [C2:P0] [C3:P0] [C4:P0] [C5:P0] |
| 07-Oct-2026 18:25:37 | test_task_deconvolve.py::test_cube::test_cube_4 |
| 07-Oct-2026 18:25:37 | [cube] test_cube_4 |
| 07-Oct-2026 18:25:37 | : channel, spw=0:5~19, LSRK |
| 07-Oct-2026 18:25:37 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:37 | refim_point |
| 07-Oct-2026 18:25:37 | PASSED |
| 07-Oct-2026 18:25:37 | |
| 07-Oct-2026 18:25:39 | test_task_deconvolve.py::test_cube::test_cube_5 |
| 07-Oct-2026 18:25:39 | [cube] test_cube_5 |
| 07-Oct-2026 18:25:39 | : frequency, default start, width='100MHz'(2 x chanwidth), TOPO |
| 07-Oct-2026 18:25:39 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:39 | refim_point |
| 07-Oct-2026 18:25:39 | PASSED |
| 07-Oct-2026 18:25:39 | |
| 07-Oct-2026 18:25:41 | test_task_deconvolve.py::test_cube::test_cube_6 |
| 07-Oct-2026 18:25:41 | [cube] test_cube_6 |
| 07-Oct-2026 18:25:41 | : frequency, start='1.1GHz', default width, TOPO |
| 07-Oct-2026 18:25:41 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:41 | refim_point |
| 07-Oct-2026 18:25:41 | PASSED |
| 07-Oct-2026 18:25:41 | |
| 07-Oct-2026 18:25:42 | 2026-10-07 22:25:42 WARN SIImageStore::getPSFGaussian (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2136) PSF is blank for[C0:P0] [C1:P0] |
| 07-Oct-2026 18:25:43 | test_task_deconvolve.py::test_cube::test_cube_7 |
| 07-Oct-2026 18:25:43 | [cube] test_cube_7 |
| 07-Oct-2026 18:25:43 | : frequency, start='1.1GHz', default width, spw=0:4~19, TOPO |
| 07-Oct-2026 18:25:43 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:43 | refim_point |
| 07-Oct-2026 18:25:43 | PASSED |
| 07-Oct-2026 18:25:43 | |
| 07-Oct-2026 18:25:45 | test_task_deconvolve.py::test_cube::test_cube_8 |
| 07-Oct-2026 18:25:45 | [cube] test_cube_8 |
| 07-Oct-2026 18:25:45 | : frequency, start='1.5GHz', width='-50MHz', TOPO |
| 07-Oct-2026 18:25:45 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:45 | refim_point |
| 07-Oct-2026 18:25:45 | PASSED |
| 07-Oct-2026 18:25:45 | |
| 07-Oct-2026 18:25:46 | test_task_deconvolve.py::test_cube::test_cube_9 |
| 07-Oct-2026 18:25:46 | [cube] test_cube_9 |
| 07-Oct-2026 18:25:46 | : frequency, default start, width='23983.4km/s', TOPO |
| 07-Oct-2026 18:25:46 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:46 | refim_point |
| 07-Oct-2026 18:25:46 | PASSED |
| 07-Oct-2026 18:25:46 | |
| 07-Oct-2026 18:25:47 | 2026-10-07 22:25:47 WARN SynthesisParamsImage::buildCoordinateSystem (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SynthesisUtilMethods.cc, line 2854) No rest frequency info, using the center of the selected spw(s):1.475e+09 Hz. Velocity labelling may not be correct. |
| 07-Oct-2026 18:25:49 | test_task_deconvolve.py::test_cube::test_cube_chanchunks_auto |
| 07-Oct-2026 18:25:49 | [cube] test_cube_chanchunks_auto |
| 07-Oct-2026 18:25:49 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:49 | refim_point |
| 07-Oct-2026 18:25:49 | PASSED |
| 07-Oct-2026 18:25:49 | |
| 07-Oct-2026 18:25:51 | test_task_deconvolve.py::test_mask::test_mask_1 |
| 07-Oct-2026 18:25:51 | [mask] test_mask_1 |
| 07-Oct-2026 18:25:51 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:51 | refim_twochan |
| 07-Oct-2026 18:25:51 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:51 | refim_twochan |
| 07-Oct-2026 18:25:51 | PASSED |
| 07-Oct-2026 18:25:51 | |
| 07-Oct-2026 18:25:51 | 2026-10-07 22:25:51 WARN SynthesisParamsImage::buildCoordinateSystem (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SynthesisUtilMethods.cc, line 2854) No rest frequency info, using the center of the selected spw(s):1.475e+09 Hz. Velocity labelling may not be correct. |
| 07-Oct-2026 18:25:53 | 2026-10-07 22:25:54 WARN SynthesisParamsImage::buildCoordinateSystem (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SynthesisUtilMethods.cc, line 2854) No rest frequency info, using the center of the selected spw(s):1.475e+09 Hz. Velocity labelling may not be correct. |
| 07-Oct-2026 18:25:55 | test_task_deconvolve.py::test_mask::test_mask_2 |
| 07-Oct-2026 18:25:55 | [mask] test_mask_2 |
| 07-Oct-2026 18:25:55 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:55 | refim_point |
| 07-Oct-2026 18:25:55 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:55 | refim_point |
| 07-Oct-2026 18:25:55 | PASSED |
| 07-Oct-2026 18:25:55 | |
| 07-Oct-2026 18:25:56 | test_task_deconvolve.py::test_mask::test_mask_autobox_multithresh |
| 07-Oct-2026 18:25:56 | [mask] test_mask_autobox_multithresh |
| 07-Oct-2026 18:25:56 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:56 | refim_twochan |
| 07-Oct-2026 18:25:56 | PASSED |
| 07-Oct-2026 18:25:56 | |
| 07-Oct-2026 18:25:57 | test_task_deconvolve.py::test_mask::test_mask_autobox_multithresh_newnoise |
| 07-Oct-2026 18:25:57 | [mask] test_mask_autobox_multithresh_newnoise |
| 07-Oct-2026 18:25:57 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:57 | refim_twochan |
| 07-Oct-2026 18:25:57 | PASSED |
| 07-Oct-2026 18:25:57 | |
| 07-Oct-2026 18:25:58 | test_task_deconvolve.py::test_mask::test_mask_autobox_multithresh_with_nsigma |
| 07-Oct-2026 18:25:58 | [mask] test_mask_autobox_multithresh_with_nsigma |
| 07-Oct-2026 18:25:58 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:58 | refim_twochan |
| 07-Oct-2026 18:25:58 | PASSED |
| 07-Oct-2026 18:25:58 | |
| 07-Oct-2026 18:25:59 | test_task_deconvolve.py::test_mask::test_mask_autobox_multithresh_with_nsigma_newnoise |
| 07-Oct-2026 18:25:59 | [mask] test_mask_autobox_multithresh_with_nsigma_newnoise |
| 07-Oct-2026 18:25:59 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:25:59 | refim_twochan |
| 07-Oct-2026 18:25:59 | PASSED |
| 07-Oct-2026 18:25:59 | |
| 07-Oct-2026 18:26:01 | test_task_deconvolve.py::test_mask::test_mask_autobox_multithresh_with_prune |
| 07-Oct-2026 18:26:01 | [mask] test_mask_autobox_multithresh_with_prune |
| 07-Oct-2026 18:26:01 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:01 | refim_twochan |
| 07-Oct-2026 18:26:01 | PASSED |
| 07-Oct-2026 18:26:01 | |
| 07-Oct-2026 18:26:02 | 2026-10-07 22:26:02 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Internal Error: 'mask' parameter specified as a filename 'tst.mask.txt', but no such file exists |
| 07-Oct-2026 18:26:02 | 2026-10-07 22:26:02 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Internal Error: 'mask' parameter specified as a filename 'tst.mask.txt', but no such file exists |
| 07-Oct-2026 18:26:02 | test_task_deconvolve.py::test_mask::test_mask_missingfile |
| 07-Oct-2026 18:26:02 | [mask] test_mask_missingfile |
| 07-Oct-2026 18:26:02 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:02 | refim_twochan |
| 07-Oct-2026 18:26:02 | PASSED |
| 07-Oct-2026 18:26:02 | |
| 07-Oct-2026 18:26:04 | test_task_deconvolve.py::test_mask::test_mask_pbmask0 |
| 07-Oct-2026 18:26:04 | [mask] test_mask_pbmask0 |
| 07-Oct-2026 18:26:04 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:04 | refim_point |
| 07-Oct-2026 18:26:04 | PASSED |
| 07-Oct-2026 18:26:04 | |
| 07-Oct-2026 18:26:06 | test_task_deconvolve.py::test_mask::test_mask_pbmask995 |
| 07-Oct-2026 18:26:06 | [mask] test_mask_pbmask995 |
| 07-Oct-2026 18:26:06 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:06 | refim_point |
| 07-Oct-2026 18:26:06 | PASSED |
| 07-Oct-2026 18:26:06 | |
| 07-Oct-2026 18:26:07 | 2026-10-07 22:26:07 WARN SIImageStore::restore (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2345) Restoring with an empty model image. Only residuals will be processed to form the output restored image. |
| 07-Oct-2026 18:26:07 | 2026-10-07 22:26:07 WARN SIImageStore::restore (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2345) Restoring with an empty model image. Only residuals will be processed to form the output restored image. |
| 07-Oct-2026 18:26:07 | test_task_deconvolve.py::test_mask::test_mask_preserve_input_zero_mask |
| 07-Oct-2026 18:26:07 | Test the fix for CAS-14203; If a user explicitly provides a |
| 07-Oct-2026 18:26:07 | zero-filled input mask, it should be respected and not flipped. |
| 07-Oct-2026 18:26:07 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:07 | refim_twochan |
| 07-Oct-2026 18:26:07 | PASSED |
| 07-Oct-2026 18:26:07 | |
| 07-Oct-2026 18:26:07 | test_task_deconvolve.py::test_multirun::test_multirun_aspasp |
| 07-Oct-2026 18:26:07 | [multirun] test_multirun_aspasp |
| 07-Oct-2026 18:26:07 | SKIPPED (test_onefield_asp is disabled on macOS due to intermittent ...) |
| 07-Oct-2026 18:26:07 | |
| 07-Oct-2026 18:26:08 | test_task_deconvolve.py::test_multirun::test_multirun_clarkclark |
| 07-Oct-2026 18:26:08 | [multirun] test_multirun_clarkclark |
| 07-Oct-2026 18:26:08 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:08 | refim_twochan |
| 07-Oct-2026 18:26:08 | PASSED |
| 07-Oct-2026 18:26:08 | |
| 07-Oct-2026 18:26:09 | test_task_deconvolve.py::test_multirun::test_multirun_clarkstokesclarkstokes |
| 07-Oct-2026 18:26:09 | [multirun] test_multirun_clarkstokesclarkstokes |
| 07-Oct-2026 18:26:09 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:09 | refim_point_linRL |
| 07-Oct-2026 18:26:09 | PASSED |
| 07-Oct-2026 18:26:09 | |
| 07-Oct-2026 18:26:10 | test_task_deconvolve.py::test_multirun::test_multirun_hogbomhogbom |
| 07-Oct-2026 18:26:10 | [multirun] test_multirun_hogbomhogbom |
| 07-Oct-2026 18:26:10 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:10 | refim_twochan |
| 07-Oct-2026 18:26:10 | PASSED |
| 07-Oct-2026 18:26:10 | |
| 07-Oct-2026 18:26:10 | 2026-10-07 22:26:11 WARN tclean::task_tclean::casa For specmode='mfs' and deconvolver='mtmfs', the option of pbcor=True divides each restored Taylor coefficient image by the pb.tt0 image. This correction ignores the frequency-dependence of the primary beam and does not correct for PB spectral index. It is scientifically valid only for small fractional bandwidths. For more accurate wideband primary beam correction (if needed), please use one of the following options : (1) specmode='mvc' with gridder='standard' or 'mosaic' with pbcor=True, (2) conjbeams=True and wbawp=True with gridder='awproject' and pbcor=True. |
| 07-Oct-2026 18:26:19 | test_task_deconvolve.py::test_multirun::test_multirun_mtmfs3x |
| 07-Oct-2026 18:26:19 | " [multirun] test_multirun_mtmfs3 |
| 07-Oct-2026 18:26:19 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:19 | refim_eptwochan |
| 07-Oct-2026 18:26:19 | PASSED |
| 07-Oct-2026 18:26:19 | |
| 07-Oct-2026 18:26:19 | 2026-10-07 22:26:19 WARN tclean::task_tclean::casa For specmode='mfs' and deconvolver='mtmfs', the option of pbcor=True divides each restored Taylor coefficient image by the pb.tt0 image. This correction ignores the frequency-dependence of the primary beam and does not correct for PB spectral index. It is scientifically valid only for small fractional bandwidths. For more accurate wideband primary beam correction (if needed), please use one of the following options : (1) specmode='mvc' with gridder='standard' or 'mosaic' with pbcor=True, (2) conjbeams=True and wbawp=True with gridder='awproject' and pbcor=True. |
| 07-Oct-2026 18:26:21 | test_task_deconvolve.py::test_multirun::test_multirun_mtmfsmtmfs |
| 07-Oct-2026 18:26:21 | " [multirun] test_multirun_mtmfsmtmfs |
| 07-Oct-2026 18:26:21 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:21 | refim_eptwochan |
| 07-Oct-2026 18:26:21 | PASSED |
| 07-Oct-2026 18:26:21 | |
| 07-Oct-2026 18:26:23 | test_task_deconvolve.py::test_multirun::test_multirun_multiscalehog |
| 07-Oct-2026 18:26:23 | [multirun] test_multirun_multiscalehog |
| 07-Oct-2026 18:26:23 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:23 | refim_eptwochan |
| 07-Oct-2026 18:26:23 | PASSED |
| 07-Oct-2026 18:26:23 | |
| 07-Oct-2026 18:26:24 | test_task_deconvolve.py::test_multirun::test_multirun_multiscalemultiscale |
| 07-Oct-2026 18:26:24 | " [multirun] test_multirun_multiscalemultiscale |
| 07-Oct-2026 18:26:24 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:24 | refim_twochan |
| 07-Oct-2026 18:26:24 | PASSED |
| 07-Oct-2026 18:26:24 | |
| 07-Oct-2026 18:26:26 | test_task_deconvolve.py::test_multirun::test_multirun_norestore_restore |
| 07-Oct-2026 18:26:26 | [multirun] test_multirun_norestore_restore |
| 07-Oct-2026 18:26:26 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:26 | refim_point |
| 07-Oct-2026 18:26:26 | PASSED |
| 07-Oct-2026 18:26:26 | |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:28 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Error in running Minor Cycle : Cannot open existing image : tst.model : There is a shape mismatch between existing images ([1, 100, 100, 1]) and current parameters ([100, 100, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:28 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Error in running Minor Cycle : Cannot open existing image : tst.model : There is a shape mismatch between existing images ([1, 100, 100, 1]) and current parameters ([100, 100, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:28 | test_task_deconvolve.py::test_imgval::test_imgval_axesmismatch_model |
| 07-Oct-2026 18:26:28 | [imgval] test_imgval_axesmismatch_model |
| 07-Oct-2026 18:26:28 | PASSED |
| 07-Oct-2026 18:26:28 | |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:28 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Cannot open existing image : tst.pb : There is a shape mismatch between existing images ([1, 100, 100, 1]) and current parameters ([100, 100, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:28 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Cannot open existing image : tst.pb : There is a shape mismatch between existing images ([1, 100, 100, 1]) and current parameters ([100, 100, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:28 | test_task_deconvolve.py::test_imgval::test_imgval_axesmismatch_pb |
| 07-Oct-2026 18:26:28 | [imgval] test_imgval_axesmismatch_pb |
| 07-Oct-2026 18:26:28 | PASSED |
| 07-Oct-2026 18:26:28 | |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:28 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Error initializing the Minor Cycle for tst : Cannot open existing image : tst.mask : There is a shape mismatch between existing images ([100, 100, 1, 1]) and current parameters ([1, 100, 100, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:28 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Error initializing the Minor Cycle for tst : Cannot open existing image : tst.mask : There is a shape mismatch between existing images ([100, 100, 1, 1]) and current parameters ([1, 100, 100, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:28 | test_task_deconvolve.py::test_imgval::test_imgval_axesmismatch_psf |
| 07-Oct-2026 18:26:28 | [imgval] test_imgval_axesmismatch_psf |
| 07-Oct-2026 18:26:28 | PASSED |
| 07-Oct-2026 18:26:28 | |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:28 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Error initializing the Minor Cycle for tst : Cannot open existing image : tst.mask : There is a coordinate system mismatch between existing images on disk and current parameters (The pixel axes differ for coordinate number 0). If you are attempting to restart a run, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new coordinate system before continuing. |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:28 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Error initializing the Minor Cycle for tst : Cannot open existing image : tst.mask : There is a coordinate system mismatch between existing images on disk and current parameters (The pixel axes differ for coordinate number 0). If you are attempting to restart a run, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new coordinate system before continuing. |
| 07-Oct-2026 18:26:28 | test_task_deconvolve.py::test_imgval::test_imgval_axesmismatch_residual |
| 07-Oct-2026 18:26:28 | [imgval] test_imgval_axesmismatch_residual |
| 07-Oct-2026 18:26:28 | PASSED |
| 07-Oct-2026 18:26:28 | |
| 07-Oct-2026 18:26:28 | test_task_deconvolve.py::test_imgval::test_imgval_missingimgs_model |
| 07-Oct-2026 18:26:28 | [imgval] test_imgval_missingimgs_model |
| 07-Oct-2026 18:26:28 | PASSED |
| 07-Oct-2026 18:26:28 | |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:29 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Internal Error: missing one or more of the required images: ['tst.psf'] |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:29 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Internal Error: missing one or more of the required images: ['tst.psf'] |
| 07-Oct-2026 18:26:28 | test_task_deconvolve.py::test_imgval::test_imgval_missingimgs_psf |
| 07-Oct-2026 18:26:28 | [imgval] test_imgval_missingimgs_psf |
| 07-Oct-2026 18:26:28 | PASSED |
| 07-Oct-2026 18:26:28 | |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:29 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Internal Error: missing one or more of the required images: ['tst.residual'] |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:29 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Internal Error: missing one or more of the required images: ['tst.residual'] |
| 07-Oct-2026 18:26:28 | test_task_deconvolve.py::test_imgval::test_imgval_missingimgs_residual |
| 07-Oct-2026 18:26:28 | [imgval] test_imgval_missingimgs_residual |
| 07-Oct-2026 18:26:28 | PASSED |
| 07-Oct-2026 18:26:28 | |
| 07-Oct-2026 18:26:28 | test_task_deconvolve.py::test_imgval::test_imgval_missingimgs_sumwt |
| 07-Oct-2026 18:26:28 | [imgval] test_imgval_missingimgs_sumwt |
| 07-Oct-2026 18:26:28 | PASSED |
| 07-Oct-2026 18:26:28 | |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:29 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Error in running Minor Cycle : Cannot open existing image : tst.model : There is a shape mismatch between existing images ([2, 2, 1, 1]) and current parameters ([100, 100, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:29 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Error in running Minor Cycle : Cannot open existing image : tst.model : There is a shape mismatch between existing images ([2, 2, 1, 1]) and current parameters ([100, 100, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:28 | test_task_deconvolve.py::test_imgval::test_imgval_shapemismatch_model |
| 07-Oct-2026 18:26:28 | [imgval] test_imgval_shapemismatch_model |
| 07-Oct-2026 18:26:28 | PASSED |
| 07-Oct-2026 18:26:28 | |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:29 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Cannot open existing image : tst.pb : There is a shape mismatch between existing images ([2, 2, 1, 1]) and current parameters ([100, 100, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:29 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Cannot open existing image : tst.pb : There is a shape mismatch between existing images ([2, 2, 1, 1]) and current parameters ([100, 100, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:28 | test_task_deconvolve.py::test_imgval::test_imgval_shapemismatch_pb |
| 07-Oct-2026 18:26:28 | [imgval] test_imgval_shapemismatch_pb |
| 07-Oct-2026 18:26:28 | PASSED |
| 07-Oct-2026 18:26:28 | |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:29 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Error initializing the Minor Cycle for tst : Cannot open existing image : tst.mask : There is a shape mismatch between existing images ([100, 100, 1, 1]) and current parameters ([2, 2, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:29 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Error initializing the Minor Cycle for tst : Cannot open existing image : tst.mask : There is a shape mismatch between existing images ([100, 100, 1, 1]) and current parameters ([2, 2, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:28 | test_task_deconvolve.py::test_imgval::test_imgval_shapemismatch_psf |
| 07-Oct-2026 18:26:28 | [imgval] test_imgval_shapemismatch_psf |
| 07-Oct-2026 18:26:28 | PASSED |
| 07-Oct-2026 18:26:28 | |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:29 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Error initializing the Minor Cycle for tst : Cannot open existing image : tst.mask : There is a coordinate system mismatch between existing images on disk and current parameters (The DirectionCoordinates have differing LinearXform components). If you are attempting to restart a run, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new coordinate system before continuing. |
| 07-Oct-2026 18:26:28 | 2026-10-07 22:26:29 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Error initializing the Minor Cycle for tst : Cannot open existing image : tst.mask : There is a coordinate system mismatch between existing images on disk and current parameters (The DirectionCoordinates have differing LinearXform components). If you are attempting to restart a run, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new coordinate system before continuing. |
| 07-Oct-2026 18:26:28 | test_task_deconvolve.py::test_imgval::test_imgval_shapemismatch_residual |
| 07-Oct-2026 18:26:28 | [imgval] test_imgval_shapemismatch_residual |
| 07-Oct-2026 18:26:28 | PASSED |
| 07-Oct-2026 18:26:28 | |
| 07-Oct-2026 18:26:28 | test_task_deconvolve.py::test_imgval::test_imgval_startmodel_axesmismatch |
| 07-Oct-2026 18:26:28 | [imgval] test_imgval_startmodel_axesmismatch |
| 07-Oct-2026 18:26:28 | SKIPPED (It makes other tests fail) |
| 07-Oct-2026 18:26:28 | |
| 07-Oct-2026 18:26:29 | test_task_deconvolve.py::test_imgval::test_imgval_startmodel_basic_copy |
| 07-Oct-2026 18:26:29 | [imgval] test_imgval_startmodel_basic_copy |
| 07-Oct-2026 18:26:29 | PASSED |
| 07-Oct-2026 18:26:29 | |
| 07-Oct-2026 18:26:29 | test_task_deconvolve.py::test_imgval::test_imgval_startmodel_csysmismatch |
| 07-Oct-2026 18:26:29 | [imgval] test_imgval_startmodel_csysmismatch |
| 07-Oct-2026 18:26:29 | PASSED |
| 07-Oct-2026 18:26:29 | |
| 07-Oct-2026 18:26:29 | 2026-10-07 22:26:29 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Internal Error: parameter startmodel set to "doesnotexists.model" but that file does not exist |
| 07-Oct-2026 18:26:29 | 2026-10-07 22:26:29 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Internal Error: parameter startmodel set to "doesnotexists.model" but that file does not exist |
| 07-Oct-2026 18:26:29 | test_task_deconvolve.py::test_imgval::test_imgval_startmodel_dne |
| 07-Oct-2026 18:26:29 | [imgval] test_imgval_startmodel_dne |
| 07-Oct-2026 18:26:29 | PASSED |
| 07-Oct-2026 18:26:29 | |
| 07-Oct-2026 18:26:29 | test_task_deconvolve.py::test_imgval::test_imgval_startmodel_empty |
| 07-Oct-2026 18:26:29 | [imgval] test_imgval_startmodel_empty |
| 07-Oct-2026 18:26:29 | PASSED |
| 07-Oct-2026 18:26:29 | |
| 07-Oct-2026 18:26:29 | 2026-10-07 22:26:30 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Internal Error: imagename.model already exists! Either parameter startmodel must not be set ('') or imagename.model (tst.model) must not exist. |
| 07-Oct-2026 18:26:29 | 2026-10-07 22:26:30 SEVERE deconvolve::deconvolve::casa+ Either unset startmodel or remove tst.model to continue |
| 07-Oct-2026 18:26:29 | 2026-10-07 22:26:30 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Internal Error: imagename.model already exists! Either parameter startmodel must not be set ('') or imagename.model (tst.model) must not exist. |
| 07-Oct-2026 18:26:29 | 2026-10-07 22:26:30 SEVERE deconvolve::::casa+ Either unset startmodel or remove tst.model to continue |
| 07-Oct-2026 18:26:29 | test_task_deconvolve.py::test_imgval::test_imgval_startmodel_model_exists |
| 07-Oct-2026 18:26:29 | [imgval] test_imgval_startmodel_model_exists |
| 07-Oct-2026 18:26:29 | PASSED |
| 07-Oct-2026 18:26:29 | |
| 07-Oct-2026 18:26:29 | test_task_deconvolve.py::test_imgval::test_imgval_startmodel_shapemismatch |
| 07-Oct-2026 18:26:29 | [imgval] test_imgval_startmodel_shapemismatch |
| 07-Oct-2026 18:26:29 | PASSED |
| 07-Oct-2026 18:26:29 | |
| 07-Oct-2026 18:26:29 | 2026-10-07 22:26:30 WARN tclean::task_tclean::casa For specmode='mfs' and deconvolver='mtmfs', the option of pbcor=True divides each restored Taylor coefficient image by the pb.tt0 image. This correction ignores the frequency-dependence of the primary beam and does not correct for PB spectral index. It is scientifically valid only for small fractional bandwidths. For more accurate wideband primary beam correction (if needed), please use one of the following options : (1) specmode='mvc' with gridder='standard' or 'mosaic' with pbcor=True, (2) conjbeams=True and wbawp=True with gridder='awproject' and pbcor=True. |
| 07-Oct-2026 18:26:31 | 2026-10-07 22:26:31 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Error in running Minor Cycle : Cannot open existing image : tst.model.tt1 : There is a shape mismatch between existing images ([1, 10, 10, 1]) and current parameters ([10, 10, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:31 | 2026-10-07 22:26:31 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Error in running Minor Cycle : Cannot open existing image : tst.model.tt1 : There is a shape mismatch between existing images ([1, 10, 10, 1]) and current parameters ([10, 10, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:31 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_axesmismatch_model |
| 07-Oct-2026 18:26:31 | [mtmfsimgval] test_mtmfsimgval_axesmismatch_model |
| 07-Oct-2026 18:26:31 | PASSED |
| 07-Oct-2026 18:26:31 | |
| 07-Oct-2026 18:26:31 | 2026-10-07 22:26:31 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Cannot open existing image : tst.pb.tt0 : There is a shape mismatch between existing images ([1, 10, 10, 1]) and current parameters ([10, 10, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:31 | 2026-10-07 22:26:31 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Cannot open existing image : tst.pb.tt0 : There is a shape mismatch between existing images ([1, 10, 10, 1]) and current parameters ([10, 10, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:31 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_axesmismatch_pb |
| 07-Oct-2026 18:26:31 | [mtmfsimgval] test_mtmfsimgval_axesmismatch_pb |
| 07-Oct-2026 18:26:31 | PASSED |
| 07-Oct-2026 18:26:31 | |
| 07-Oct-2026 18:26:31 | 2026-10-07 22:26:31 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Error in running Minor Cycle : Cannot open existing image : tst.psf.tt1 : There is a shape mismatch between existing images ([1, 10, 10, 1]) and current parameters ([10, 10, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:31 | 2026-10-07 22:26:31 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Error in running Minor Cycle : Cannot open existing image : tst.psf.tt1 : There is a shape mismatch between existing images ([1, 10, 10, 1]) and current parameters ([10, 10, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:31 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_axesmismatch_psf |
| 07-Oct-2026 18:26:31 | [mtmfsimgval] test_mtmfsimgval_axesmismatch_psf |
| 07-Oct-2026 18:26:31 | PASSED |
| 07-Oct-2026 18:26:31 | |
| 07-Oct-2026 18:26:31 | 2026-10-07 22:26:32 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Error in running Minor Cycle : Cannot open existing image : tst.residual.tt1 : There is a shape mismatch between existing images ([1, 10, 10, 1]) and current parameters ([10, 10, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:31 | 2026-10-07 22:26:32 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Error in running Minor Cycle : Cannot open existing image : tst.residual.tt1 : There is a shape mismatch between existing images ([1, 10, 10, 1]) and current parameters ([10, 10, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:31 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_axesmismatch_residual |
| 07-Oct-2026 18:26:31 | [mtmfsimgval] test_mtmfsimgval_axesmismatch_residual |
| 07-Oct-2026 18:26:31 | PASSED |
| 07-Oct-2026 18:26:31 | |
| 07-Oct-2026 18:26:31 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_missingimgs_model |
| 07-Oct-2026 18:26:31 | [mtmfsimgval] test_mtmfsimgval_missingimgs_model |
| 07-Oct-2026 18:26:31 | PASSED |
| 07-Oct-2026 18:26:31 | |
| 07-Oct-2026 18:26:31 | 2026-10-07 22:26:32 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Internal Error: missing one or more of the required images: ['tst.psf.tt1'] |
| 07-Oct-2026 18:26:31 | 2026-10-07 22:26:32 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Internal Error: missing one or more of the required images: ['tst.psf.tt1'] |
| 07-Oct-2026 18:26:31 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_missingimgs_psf |
| 07-Oct-2026 18:26:31 | [mtmfsimgval] test_mtmfsimgval_missingimgs_psf |
| 07-Oct-2026 18:26:31 | PASSED |
| 07-Oct-2026 18:26:31 | |
| 07-Oct-2026 18:26:31 | 2026-10-07 22:26:32 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Internal Error: missing one or more of the required images: ['tst.residual.tt1'] |
| 07-Oct-2026 18:26:31 | 2026-10-07 22:26:32 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Internal Error: missing one or more of the required images: ['tst.residual.tt1'] |
| 07-Oct-2026 18:26:31 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_missingimgs_residual |
| 07-Oct-2026 18:26:31 | [mtmfsimgval] test_mtmfsimgval_missingimgs_residual |
| 07-Oct-2026 18:26:31 | PASSED |
| 07-Oct-2026 18:26:31 | |
| 07-Oct-2026 18:26:31 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_missingimgs_sumwt |
| 07-Oct-2026 18:26:31 | [mtmfsimgval] test_mtmfsimgval_missingimgs_sumwt |
| 07-Oct-2026 18:26:31 | PASSED |
| 07-Oct-2026 18:26:31 | |
| 07-Oct-2026 18:26:32 | 2026-10-07 22:26:32 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Error in running Minor Cycle : Cannot open existing image : tst.model.tt1 : There is a shape mismatch between existing images ([5, 5, 1, 1]) and current parameters ([10, 10, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:32 | 2026-10-07 22:26:32 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Error in running Minor Cycle : Cannot open existing image : tst.model.tt1 : There is a shape mismatch between existing images ([5, 5, 1, 1]) and current parameters ([10, 10, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:32 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_shapemismatch_model |
| 07-Oct-2026 18:26:32 | [mtmfsimgval] test_mtmfsimgval_shapemismatch_model |
| 07-Oct-2026 18:26:32 | PASSED |
| 07-Oct-2026 18:26:32 | |
| 07-Oct-2026 18:26:32 | 2026-10-07 22:26:32 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Cannot open existing image : tst.pb.tt0 : There is a shape mismatch between existing images ([5, 5, 1, 1]) and current parameters ([10, 10, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:32 | 2026-10-07 22:26:32 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Cannot open existing image : tst.pb.tt0 : There is a shape mismatch between existing images ([5, 5, 1, 1]) and current parameters ([10, 10, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:32 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_shapemismatch_pb |
| 07-Oct-2026 18:26:32 | [mtmfsimgval] test_mtmfsimgval_shapemismatch_pb |
| 07-Oct-2026 18:26:32 | PASSED |
| 07-Oct-2026 18:26:32 | |
| 07-Oct-2026 18:26:32 | 2026-10-07 22:26:32 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Error in running Minor Cycle : Cannot open existing image : tst.psf.tt1 : There is a shape mismatch between existing images ([5, 5, 1, 1]) and current parameters ([10, 10, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:32 | 2026-10-07 22:26:32 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Error in running Minor Cycle : Cannot open existing image : tst.psf.tt1 : There is a shape mismatch between existing images ([5, 5, 1, 1]) and current parameters ([10, 10, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:32 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_shapemismatch_psf |
| 07-Oct-2026 18:26:32 | [mtmfsimgval] test_mtmfsimgval_shapemismatch_psf |
| 07-Oct-2026 18:26:32 | PASSED |
| 07-Oct-2026 18:26:32 | |
| 07-Oct-2026 18:26:32 | 2026-10-07 22:26:32 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Error in running Minor Cycle : Cannot open existing image : tst.residual.tt1 : There is a shape mismatch between existing images ([5, 5, 1, 1]) and current parameters ([10, 10, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:32 | 2026-10-07 22:26:32 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Error in running Minor Cycle : Cannot open existing image : tst.residual.tt1 : There is a shape mismatch between existing images ([5, 5, 1, 1]) and current parameters ([10, 10, 1, 1]). If you are attempting to restart a run with a new image shape, please change imagename and supply the old model or mask as inputs (via the startmodel or mask parameters) so that they can be regridded to the new shape before continuing. |
| 07-Oct-2026 18:26:32 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_shapemismatch_residual |
| 07-Oct-2026 18:26:32 | [mtmfsimgval] test_mtmfsimgval_shapemismatch_residual |
| 07-Oct-2026 18:26:32 | PASSED |
| 07-Oct-2026 18:26:32 | |
| 07-Oct-2026 18:26:32 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_startmodel_axesmismatch |
| 07-Oct-2026 18:26:32 | [mtmfsimgval] test_mtmfsimgval_startmodel_axesmismatch |
| 07-Oct-2026 18:26:32 | SKIPPED (because test 90 fails) |
| 07-Oct-2026 18:26:32 | |
| 07-Oct-2026 18:26:32 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_startmodel_basic_copy |
| 07-Oct-2026 18:26:32 | [mtmfsimgval] test_mtmfsimgval_startmodel_basic_copy |
| 07-Oct-2026 18:26:32 | PASSED |
| 07-Oct-2026 18:26:32 | |
| 07-Oct-2026 18:26:32 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_startmodel_csysmismatch |
| 07-Oct-2026 18:26:32 | [mtmfsimgval] test_mtmfsimgval_startmodel_csysmismatch |
| 07-Oct-2026 18:26:32 | PASSED |
| 07-Oct-2026 18:26:32 | |
| 07-Oct-2026 18:26:32 | 2026-10-07 22:26:33 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Internal Error: parameter startmodel set to "doesnotexists.model" but that file does not exist |
| 07-Oct-2026 18:26:32 | 2026-10-07 22:26:33 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Internal Error: parameter startmodel set to "doesnotexists.model" but that file does not exist |
| 07-Oct-2026 18:26:32 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_startmodel_dne |
| 07-Oct-2026 18:26:32 | [mtmfsimgval] test_mtmfsimgval_startmodel_dne |
| 07-Oct-2026 18:26:32 | PASSED |
| 07-Oct-2026 18:26:32 | |
| 07-Oct-2026 18:26:33 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_startmodel_empty |
| 07-Oct-2026 18:26:33 | [mtmfsimgval] test_mtmfsimgval_startmodel_empty |
| 07-Oct-2026 18:26:33 | PASSED |
| 07-Oct-2026 18:26:33 | |
| 07-Oct-2026 18:26:33 | 2026-10-07 22:26:33 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Internal Error: imagename.model already exists! Either parameter startmodel must not be set ('') or imagename.model (tst.model.tt1) must not exist. |
| 07-Oct-2026 18:26:33 | 2026-10-07 22:26:33 SEVERE deconvolve::deconvolve::casa+ Either unset startmodel or remove tst.model.tt1 to continue |
| 07-Oct-2026 18:26:33 | 2026-10-07 22:26:33 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Internal Error: imagename.model already exists! Either parameter startmodel must not be set ('') or imagename.model (tst.model.tt1) must not exist. |
| 07-Oct-2026 18:26:33 | 2026-10-07 22:26:33 SEVERE deconvolve::::casa+ Either unset startmodel or remove tst.model.tt1 to continue |
| 07-Oct-2026 18:26:33 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_startmodel_model_exists |
| 07-Oct-2026 18:26:33 | [mtmfsimgval] test_mtmfsimgval_startmodel_model_exists |
| 07-Oct-2026 18:26:33 | PASSED |
| 07-Oct-2026 18:26:33 | |
| 07-Oct-2026 18:26:33 | test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_startmodel_shapemismatch |
| 07-Oct-2026 18:26:33 | [mtmfsimgval] test_mtmfsimgval_startmodel_shapemismatch |
| 07-Oct-2026 18:26:33 | PASSED |
| 07-Oct-2026 18:26:33 | |
| 07-Oct-2026 18:26:34 | test_task_deconvolve.py::test_residual_update::test_residual_update_clark |
| 07-Oct-2026 18:26:34 | [residual_update] test_residual_update_clark |
| 07-Oct-2026 18:26:34 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:34 | refim_eptwochan |
| 07-Oct-2026 18:26:34 | PASSED |
| 07-Oct-2026 18:26:34 | |
| 07-Oct-2026 18:26:35 | test_task_deconvolve.py::test_residual_update::test_residual_update_clarkstokes |
| 07-Oct-2026 18:26:35 | [residual_update] test_residual_update_clarkstokes |
| 07-Oct-2026 18:26:35 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:35 | refim_point_linRL |
| 07-Oct-2026 18:26:35 | PASSED |
| 07-Oct-2026 18:26:35 | |
| 07-Oct-2026 18:26:36 | test_task_deconvolve.py::test_residual_update::test_residual_update_hogbom |
| 07-Oct-2026 18:26:36 | [residual_update] test_residual_update_hogbom |
| 07-Oct-2026 18:26:36 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:36 | refim_eptwochan |
| 07-Oct-2026 18:26:36 | PASSED |
| 07-Oct-2026 18:26:36 | |
| 07-Oct-2026 18:26:36 | 2026-10-07 22:26:36 WARN tclean::task_tclean::casa For specmode='mfs' and deconvolver='mtmfs', the option of pbcor=True divides each restored Taylor coefficient image by the pb.tt0 image. This correction ignores the frequency-dependence of the primary beam and does not correct for PB spectral index. It is scientifically valid only for small fractional bandwidths. For more accurate wideband primary beam correction (if needed), please use one of the following options : (1) specmode='mvc' with gridder='standard' or 'mosaic' with pbcor=True, (2) conjbeams=True and wbawp=True with gridder='awproject' and pbcor=True. |
| 07-Oct-2026 18:26:37 | test_task_deconvolve.py::test_residual_update::test_residual_update_mtmfs |
| 07-Oct-2026 18:26:37 | [residual_update] test_residual_update_mtmfs |
| 07-Oct-2026 18:26:37 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:37 | refim_eptwochan |
| 07-Oct-2026 18:26:37 | PASSED |
| 07-Oct-2026 18:26:37 | |
| 07-Oct-2026 18:26:39 | test_task_deconvolve.py::test_residual_update::test_residual_update_multiscale |
| 07-Oct-2026 18:26:39 | [residual_update] test_residual_update_multiscale |
| 07-Oct-2026 18:26:39 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:39 | refim_eptwochan |
| 07-Oct-2026 18:26:39 | PASSED |
| 07-Oct-2026 18:26:39 | |
| 07-Oct-2026 18:26:40 | test_task_deconvolve.py::test_restoration::test_restoration_basic |
| 07-Oct-2026 18:26:40 | [restoration] test_restoration_basic |
| 07-Oct-2026 18:26:40 | PASSED |
| 07-Oct-2026 18:26:40 | |
| 07-Oct-2026 18:26:41 | test_task_deconvolve.py::test_restoration::test_restoration_bigbeam |
| 07-Oct-2026 18:26:41 | [restoration] test_restoration_bigbeam |
| 07-Oct-2026 18:26:41 | PASSED |
| 07-Oct-2026 18:26:41 | |
| 07-Oct-2026 18:26:41 | test_task_deconvolve.py::test_restoration::test_restoration_none |
| 07-Oct-2026 18:26:41 | [restoration] test_restoration_none |
| 07-Oct-2026 18:26:41 | PASSED |
| 07-Oct-2026 18:26:41 | |
| 07-Oct-2026 18:26:41 | test_task_deconvolve.py::test_restoration::test_restoration_onlyrestore |
| 07-Oct-2026 18:26:41 | [restoration] test_restoration_onlyrestore |
| 07-Oct-2026 18:26:41 | PASSED |
| 07-Oct-2026 18:26:41 | |
| 07-Oct-2026 18:26:42 | test_task_deconvolve.py::test_niterparms::test_niterparms_gain_1 |
| 07-Oct-2026 18:26:42 | [niterparms] test_niterparms_gain_1 |
| 07-Oct-2026 18:26:42 | PASSED |
| 07-Oct-2026 18:26:42 | |
| 07-Oct-2026 18:26:43 | test_task_deconvolve.py::test_niterparms::test_niterparms_gain_2 |
| 07-Oct-2026 18:26:43 | [niterparms] test_niterparms_gain_2 |
| 07-Oct-2026 18:26:43 | PASSED |
| 07-Oct-2026 18:26:43 | |
| 07-Oct-2026 18:26:43 | test_task_deconvolve.py::test_niterparms::test_niterparms_nsigma_1 |
| 07-Oct-2026 18:26:43 | [niterparms] test_niterparms_nsigma_1 |
| 07-Oct-2026 18:26:43 | PASSED |
| 07-Oct-2026 18:26:43 | |
| 07-Oct-2026 18:26:44 | test_task_deconvolve.py::test_niterparms::test_niterparms_nsigma_2 |
| 07-Oct-2026 18:26:44 | [niterparms] test_niterparms_nsigma_2 |
| 07-Oct-2026 18:26:44 | PASSED |
| 07-Oct-2026 18:26:44 | |
| 07-Oct-2026 18:26:45 | test_task_deconvolve.py::test_niterparms::test_niterparms_threshold_1 |
| 07-Oct-2026 18:26:45 | [niterparms] test_niterparms_threshold_1 |
| 07-Oct-2026 18:26:45 | PASSED |
| 07-Oct-2026 18:26:45 | |
| 07-Oct-2026 18:26:45 | test_task_deconvolve.py::test_niterparms::test_niterparms_threshold_2 |
| 07-Oct-2026 18:26:45 | [niterparms] test_niterparms_threshold_2 |
| 07-Oct-2026 18:26:45 | PASSED |
| 07-Oct-2026 18:26:45 | |
| 07-Oct-2026 18:26:46 | test_task_deconvolve.py::test_niterparms::test_niterparms_threshold_3 |
| 07-Oct-2026 18:26:46 | [niterparms] test_niterparms_threshold_3 |
| 07-Oct-2026 18:26:46 | PASSED |
| 07-Oct-2026 18:26:46 | |
| 07-Oct-2026 18:26:47 | test_task_deconvolve.py::test_niterparms::test_niterparms_unset |
| 07-Oct-2026 18:26:47 | [niterparms] test_niterparms_unset |
| 07-Oct-2026 18:26:47 | PASSED |
| 07-Oct-2026 18:26:47 | |
| 07-Oct-2026 18:26:49 | 2026-10-07 22:26:49 WARN SDMaskHandler::autoMaskByMultiThreshold (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SDMaskHandler.cc, line 2228) Faint regions may not be included in the final mask. Consider decreasing cutthreshold. |
| 07-Oct-2026 18:26:49 | test_task_deconvolve.py::test_minimages::test_minimages_cutthreshold |
| 07-Oct-2026 18:26:49 | [minimages] test_minimages_cutthreshold |
| 07-Oct-2026 18:26:49 | PASSED |
| 07-Oct-2026 18:26:49 | |
| 07-Oct-2026 18:26:49 | test_task_deconvolve.py::test_minimages::test_minimages_deconvolver_clark |
| 07-Oct-2026 18:26:49 | [minimages] test_minimages_deconvolver_clark |
| 07-Oct-2026 18:26:49 | PASSED |
| 07-Oct-2026 18:26:49 | |
| 07-Oct-2026 18:26:49 | 2026-10-07 22:26:49 WARN tclean::task_tclean::casa For specmode='mfs' and deconvolver='mtmfs', the option of pbcor=True divides each restored Taylor coefficient image by the pb.tt0 image. This correction ignores the frequency-dependence of the primary beam and does not correct for PB spectral index. It is scientifically valid only for small fractional bandwidths. For more accurate wideband primary beam correction (if needed), please use one of the following options : (1) specmode='mvc' with gridder='standard' or 'mosaic' with pbcor=True, (2) conjbeams=True and wbawp=True with gridder='awproject' and pbcor=True. |
| 07-Oct-2026 18:26:52 | test_task_deconvolve.py::test_minimages::test_minimages_deconvolver_mtmfs |
| 07-Oct-2026 18:26:52 | [minimages] test_minimages_deconvolver_mtmfs |
| 07-Oct-2026 18:26:52 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:52 | refim_point |
| 07-Oct-2026 18:26:52 | PASSED |
| 07-Oct-2026 18:26:52 | |
| 07-Oct-2026 18:26:52 | test_task_deconvolve.py::test_minimages::test_minimages_deconvolver_multiscale |
| 07-Oct-2026 18:26:52 | [minimages] test_minimages_deconvolver_multiscale |
| 07-Oct-2026 18:26:52 | PASSED |
| 07-Oct-2026 18:26:52 | |
| 07-Oct-2026 18:26:52 | test_task_deconvolve.py::test_minimages::test_minimages_dogrowprune |
| 07-Oct-2026 18:26:52 | [minimages] test_minimages_dogrowprune |
| 07-Oct-2026 18:26:52 | PASSED |
| 07-Oct-2026 18:26:52 | |
| 07-Oct-2026 18:26:53 | test_task_deconvolve.py::test_minimages::test_minimages_fastnoise |
| 07-Oct-2026 18:26:53 | [minimages] test_minimages_fastnoise |
| 07-Oct-2026 18:26:53 | PASSED |
| 07-Oct-2026 18:26:53 | |
| 07-Oct-2026 18:26:53 | test_task_deconvolve.py::test_minimages::test_minimages_fullsummary |
| 07-Oct-2026 18:26:53 | [minimages] test_minimages_fullsummary |
| 07-Oct-2026 18:26:53 | PASSED |
| 07-Oct-2026 18:26:53 | |
| 07-Oct-2026 18:26:53 | test_task_deconvolve.py::test_minimages::test_minimages_gain |
| 07-Oct-2026 18:26:53 | [minimages] test_minimages_gain |
| 07-Oct-2026 18:26:53 | PASSED |
| 07-Oct-2026 18:26:53 | |
| 07-Oct-2026 18:26:53 | test_task_deconvolve.py::test_minimages::test_minimages_growiterations |
| 07-Oct-2026 18:26:53 | [minimages] test_minimages_growiterations |
| 07-Oct-2026 18:26:53 | PASSED |
| 07-Oct-2026 18:26:53 | |
| 07-Oct-2026 18:26:53 | test_task_deconvolve.py::test_minimages::test_minimages_lownoisethreshold |
| 07-Oct-2026 18:26:53 | [minimages] test_minimages_lownoisethreshold |
| 07-Oct-2026 18:26:53 | PASSED |
| 07-Oct-2026 18:26:53 | |
| 07-Oct-2026 18:26:53 | test_task_deconvolve.py::test_minimages::test_minimages_mask |
| 07-Oct-2026 18:26:53 | [minimages] test_minimages_mask |
| 07-Oct-2026 18:26:53 | PASSED |
| 07-Oct-2026 18:26:53 | |
| 07-Oct-2026 18:26:53 | test_task_deconvolve.py::test_minimages::test_minimages_minbeamfrac |
| 07-Oct-2026 18:26:53 | [minimages] test_minimages_minbeamfrac |
| 07-Oct-2026 18:26:53 | PASSED |
| 07-Oct-2026 18:26:53 | |
| 07-Oct-2026 18:26:53 | test_task_deconvolve.py::test_minimages::test_minimages_negativethreshold |
| 07-Oct-2026 18:26:53 | [minimages] test_minimages_negativethreshold |
| 07-Oct-2026 18:26:53 | PASSED |
| 07-Oct-2026 18:26:53 | |
| 07-Oct-2026 18:26:53 | test_task_deconvolve.py::test_minimages::test_minimages_niter |
| 07-Oct-2026 18:26:53 | [minimages] test_minimages_niter |
| 07-Oct-2026 18:26:53 | PASSED |
| 07-Oct-2026 18:26:53 | |
| 07-Oct-2026 18:26:53 | test_task_deconvolve.py::test_minimages::test_minimages_noisethreshold |
| 07-Oct-2026 18:26:53 | [minimages] test_minimages_noisethreshold |
| 07-Oct-2026 18:26:53 | PASSED |
| 07-Oct-2026 18:26:53 | |
| 07-Oct-2026 18:26:53 | test_task_deconvolve.py::test_minimages::test_minimages_nsigma |
| 07-Oct-2026 18:26:53 | [minimages] test_minimages_nsigma |
| 07-Oct-2026 18:26:53 | PASSED |
| 07-Oct-2026 18:26:53 | |
| 07-Oct-2026 18:26:54 | 2026-10-07 22:26:54 WARN tclean::task_tclean::casa For specmode='mfs' and deconvolver='mtmfs', the option of pbcor=True divides each restored Taylor coefficient image by the pb.tt0 image. This correction ignores the frequency-dependence of the primary beam and does not correct for PB spectral index. It is scientifically valid only for small fractional bandwidths. For more accurate wideband primary beam correction (if needed), please use one of the following options : (1) specmode='mvc' with gridder='standard' or 'mosaic' with pbcor=True, (2) conjbeams=True and wbawp=True with gridder='awproject' and pbcor=True. |
| 07-Oct-2026 18:26:57 | test_task_deconvolve.py::test_minimages::test_minimages_nsigma_mtmfs |
| 07-Oct-2026 18:26:57 | [minimages] test_minimages_nsigma |
| 07-Oct-2026 18:26:57 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:26:57 | refim_point |
| 07-Oct-2026 18:26:57 | PASSED |
| 07-Oct-2026 18:26:57 | |
| 07-Oct-2026 18:26:57 | 2026-10-07 22:26:57 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : The parameter nsigma>0 (1.5) requires a .pb image to be available. |
| 07-Oct-2026 18:26:57 | 2026-10-07 22:26:57 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : The parameter nsigma>0 (1.5) requires a .pb image to be available. |
| 07-Oct-2026 18:26:57 | test_task_deconvolve.py::test_minimages::test_minimages_nsigma_nopb |
| 07-Oct-2026 18:26:57 | [minimages] test_minimages_nsigma |
| 07-Oct-2026 18:26:57 | PASSED |
| 07-Oct-2026 18:26:57 | |
| 07-Oct-2026 18:26:57 | 2026-10-07 22:26:58 WARN tclean::task_tclean::casa For specmode='mfs' and deconvolver='mtmfs', the option of pbcor=True divides each restored Taylor coefficient image by the pb.tt0 image. This correction ignores the frequency-dependence of the primary beam and does not correct for PB spectral index. It is scientifically valid only for small fractional bandwidths. For more accurate wideband primary beam correction (if needed), please use one of the following options : (1) specmode='mvc' with gridder='standard' or 'mosaic' with pbcor=True, (2) conjbeams=True and wbawp=True with gridder='awproject' and pbcor=True. |
| 07-Oct-2026 18:27:00 | 2026-10-07 22:27:01 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : The parameter nsigma>0 (1.5) requires a .pb.tt0 image to be available. |
| 07-Oct-2026 18:27:00 | 2026-10-07 22:27:01 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : The parameter nsigma>0 (1.5) requires a .pb.tt0 image to be available. |
| 07-Oct-2026 18:27:00 | test_task_deconvolve.py::test_minimages::test_minimages_nsigma_nopb_mtmfs |
| 07-Oct-2026 18:27:00 | [minimages] test_minimages_nsigma |
| 07-Oct-2026 18:27:00 | /opt/casa/data/casatestdata/unittest/deconvolve/ |
| 07-Oct-2026 18:27:00 | refim_point |
| 07-Oct-2026 18:27:00 | PASSED |
| 07-Oct-2026 18:27:00 | |
| 07-Oct-2026 18:27:00 | test_task_deconvolve.py::test_minimages::test_minimages_restoration |
| 07-Oct-2026 18:27:00 | [minimages] test_minimages_restoration |
| 07-Oct-2026 18:27:00 | PASSED |
| 07-Oct-2026 18:27:00 | |
| 07-Oct-2026 18:27:00 | 2026-10-07 22:27:01 WARN SIImageStore::rescaleResolution (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 1655) Cannot convolve to new beam for Channel : 0 : Source may be only (slightly) resolved in one direction |
| 07-Oct-2026 18:27:00 | test_task_deconvolve.py::test_minimages::test_minimages_restoringbeam |
| 07-Oct-2026 18:27:00 | [minimages] test_minimages_restoringbeam |
| 07-Oct-2026 18:27:00 | PASSED |
| 07-Oct-2026 18:27:00 | |
| 07-Oct-2026 18:27:00 | 2026-10-07 22:27:01 WARN SDMaskHandler::autoMaskByMultiThreshold (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SDMaskHandler.cc, line 3069) No regions found by automasking |
| 07-Oct-2026 18:27:00 | 2026-10-07 22:27:01 WARN SDMaskHandler::autoMaskByMultiThreshold (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SDMaskHandler.cc, line 3069) Used sidelobe threshold to mask, but no emission was found.Try decreasing your sidelobethreshold parameter if you want to capture emission in these channels. |
| 07-Oct-2026 18:27:00 | 2026-10-07 22:27:01 WARN SIImageStore::restore (file /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DBC270-BPO15AP312/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2345) Restoring with an empty model image. Only residuals will be processed to form the output restored image. |
| 07-Oct-2026 18:27:01 | test_task_deconvolve.py::test_minimages::test_minimages_sidelobethreshold |
| 07-Oct-2026 18:27:01 | [minimages] test_minimages_sidelobethreshold |
| 07-Oct-2026 18:27:01 | PASSED |
| 07-Oct-2026 18:27:01 | |
| 07-Oct-2026 18:27:01 | test_task_deconvolve.py::test_minimages::test_minimages_smallscalebias |
| 07-Oct-2026 18:27:01 | [minimages] test_minimages_smallscalebias |
| 07-Oct-2026 18:27:01 | PASSED |
| 07-Oct-2026 18:27:01 | |
| 07-Oct-2026 18:27:01 | test_task_deconvolve.py::test_minimages::test_minimages_smoothfactor |
| 07-Oct-2026 18:27:01 | [minimages] test_minimages_smoothfactor |
| 07-Oct-2026 18:27:01 | PASSED |
| 07-Oct-2026 18:27:01 | |
| 07-Oct-2026 18:27:01 | test_task_deconvolve.py::test_minimages::test_minimages_threshold |
| 07-Oct-2026 18:27:01 | [minimages] test_minimages_threshold |
| 07-Oct-2026 18:27:01 | PASSED |
| 07-Oct-2026 18:27:01 | |
| 07-Oct-2026 18:27:01 | 2026-10-07 22:27:01 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Need PB/Sensitivity/Weight image before a PB-based mask can be made for tst |
| 07-Oct-2026 18:27:01 | 2026-10-07 22:27:01 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Need PB/Sensitivity/Weight image before a PB-based mask can be made for tst |
| 07-Oct-2026 18:27:01 | test_task_deconvolve.py::test_minimages::test_minimages_usemask |
| 07-Oct-2026 18:27:01 | [minimages] test_minimages_usemask |
| 07-Oct-2026 18:27:01 | PASSED |
| 07-Oct-2026 18:27:01 | |
| 07-Oct-2026 18:27:01 | test_task_deconvolve.py::test_minimages::test_minimages_verbose |
| 07-Oct-2026 18:27:01 | [minimages] test_minimages_verbose |
| 07-Oct-2026 18:27:01 | PASSED |
| 07-Oct-2026 18:27:01 | |
| 07-Oct-2026 18:27:01 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_deconvolve/nose.xml - |
| 07-Oct-2026 18:27:01 | =========================== short test summary info ============================ |
| 07-Oct-2026 18:27:01 | SKIPPED [1] test_task_deconvolve.py:948: test_onefield_asp is disabled on macOS due to intermittent failures |
| 07-Oct-2026 18:27:01 | SKIPPED [1] test_task_deconvolve.py:2159: test_onefield_asp is disabled on macOS due to intermittent failures. |
| 07-Oct-2026 18:27:01 | SKIPPED [1] test_task_deconvolve.py:2500: It makes other tests fail |
| 07-Oct-2026 18:27:01 | SKIPPED [1] test_task_deconvolve.py:2838: because test 90 fails |
| 07-Oct-2026 18:27:01 | ============ 139 passed, 4 skipped, 2 warnings in 136.59s (0:02:16) ============ |
| 07-Oct-2026 18:27:01 | ============================= test session starts ============================== |
| 07-Oct-2026 18:27:01 | platform darwin -- Python 3.12.8, pytest-9.1.1, pluggy-1.6.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6testenv/bin/python |
| 07-Oct-2026 18:27:01 | cachedir: .pytest_cache |
| 07-Oct-2026 18:27:01 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_feather |
| 07-Oct-2026 18:27:01 | configfile: pytest.ini |
| 07-Oct-2026 18:27:04 | collecting ... collected 9 items |
| 07-Oct-2026 18:27:04 | |
| 07-Oct-2026 18:27:04 | |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:04 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 07-Oct-2026 18:27:04 | test_task_feather.py::feather_test::test_combine |
| 07-Oct-2026 18:27:04 | test_combine |
| 07-Oct-2026 18:27:04 | -------------- |
| 07-Oct-2026 18:27:04 | |
| 07-Oct-2026 18:27:04 | Check that interferometric and Single dish images can be combined |
| 07-Oct-2026 18:27:04 | PASSED |
| 07-Oct-2026 18:27:04 | |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:04 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:04 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:04 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:04 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 07-Oct-2026 18:27:04 | test_task_feather.py::feather_test::test_common_and_mixed_beam |
| 07-Oct-2026 18:27:04 | test_common_and_mixed_beams |
| 07-Oct-2026 18:27:04 | ---------------------- |
| 07-Oct-2026 18:27:04 | Check that feather works with cubes with a common restoring beam for all channels |
| 07-Oct-2026 18:27:04 | Also, if either one image has per-plane beams, it should default to per-plane feathering. |
| 07-Oct-2026 18:27:04 | PASSED |
| 07-Oct-2026 18:27:04 | |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:05 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:05 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:05 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:05 SEVERE feather::imager::feather() Caught exception: Beam due to new effective diameter may be smaller than the beam of original dish image |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:05 SEVERE feather::::casa Task feather raised an exception of class RuntimeError with the following message: 2026-10-07 22:27:05 SEVERE feather::imager::feather() Caught exception: Beam due to new effective diameter may be smaller than the beam of original dish image |
| 07-Oct-2026 18:27:04 | test_task_feather.py::feather_test::test_effdishdiam |
| 07-Oct-2026 18:27:04 | test_effdishdiam |
| 07-Oct-2026 18:27:04 | ------------------ |
| 07-Oct-2026 18:27:04 | |
| 07-Oct-2026 18:27:04 | Check that chaging the effective dish diameter results in differing image files |
| 07-Oct-2026 18:27:04 | PASSED |
| 07-Oct-2026 18:27:04 | |
| 07-Oct-2026 18:27:04 | test_task_feather.py::feather_test::test_highres |
| 07-Oct-2026 18:27:04 | test_highres |
| 07-Oct-2026 18:27:04 | -------------- |
| 07-Oct-2026 18:27:04 | |
| 07-Oct-2026 18:27:04 | Check that the interferometric image is provided with this parameter |
| 07-Oct-2026 18:27:04 | This parameter is nessisary to run the task |
| 07-Oct-2026 18:27:04 | PASSED |
| 07-Oct-2026 18:27:04 | |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:05 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:05 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 07-Oct-2026 18:27:04 | test_task_feather.py::feather_test::test_imagename |
| 07-Oct-2026 18:27:04 | test_imagename |
| 07-Oct-2026 18:27:04 | ---------------- |
| 07-Oct-2026 18:27:04 | |
| 07-Oct-2026 18:27:04 | Check that the imagename parameter gives the name of the output image file |
| 07-Oct-2026 18:27:04 | PASSED |
| 07-Oct-2026 18:27:04 | |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:05 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:05 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 07-Oct-2026 18:27:04 | test_task_feather.py::feather_test::test_lowpassfiltersd |
| 07-Oct-2026 18:27:04 | test_lowpassfiltersd |
| 07-Oct-2026 18:27:04 | ---------------------- |
| 07-Oct-2026 18:27:04 | |
| 07-Oct-2026 18:27:04 | Check that lowpassfiltersd = True results in a different image than the default |
| 07-Oct-2026 18:27:04 | PASSED |
| 07-Oct-2026 18:27:04 | |
| 07-Oct-2026 18:27:04 | test_task_feather.py::feather_test::test_lowres |
| 07-Oct-2026 18:27:04 | test_lowres |
| 07-Oct-2026 18:27:04 | ------------- |
| 07-Oct-2026 18:27:04 | |
| 07-Oct-2026 18:27:04 | Check that the single dish image is provided with this parameter |
| 07-Oct-2026 18:27:04 | This parameter is nessisary to run the task |
| 07-Oct-2026 18:27:04 | PASSED |
| 07-Oct-2026 18:27:04 | |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:05 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:05 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:05 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 07-Oct-2026 18:27:04 | test_task_feather.py::feather_test::test_perplanebeam |
| 07-Oct-2026 18:27:04 | test_perplanebeam |
| 07-Oct-2026 18:27:04 | ---------------------- |
| 07-Oct-2026 18:27:04 | Check that feather works with cubes with perplanebeams |
| 07-Oct-2026 18:27:04 | PASSED |
| 07-Oct-2026 18:27:04 | |
| 07-Oct-2026 18:27:04 | 2026-10-07 22:27:05 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 07-Oct-2026 18:27:05 | 2026-10-07 22:27:05 WARN feather::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 07-Oct-2026 18:27:05 | test_task_feather.py::feather_test::test_sdfactor |
| 07-Oct-2026 18:27:05 | test_sdfactor |
| 07-Oct-2026 18:27:05 | --------------- |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Check that differing sdfactors results in differing image files |
| 07-Oct-2026 18:27:05 | PASSED |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_feather/nose.xml - |
| 07-Oct-2026 18:27:05 | ========================= 9 passed, 1 warning in 3.29s ========================= |
| 07-Oct-2026 18:27:05 | Namespace(list=False, verbose=False, dry_run=False, classes=None, file=None, mapfile=<_io.TextIOWrapper name='./casatestutils/component_to_test_map.json' mode='r' encoding='UTF-8'>, branch='CAS-14900', merge_target=None, pkg=None, work_dir=None, ncores=2, test_paths=None, test_list=None, test_config=None, test_group='Imaging,tclean', pmode=None, bamboo=False, cachedir=None, ignore_list='test_casampi,test_task_msview,test_task_imview,test_task_plotms', run_skipped=False, only_skipped=False) |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Operating system: Darwin |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Testing Components['Imaging', 'tclean'] |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Arguments Sent Direct To Pytest : [] |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Tests to Ignore: ['test_casampi', 'test_task_msview', 'test_task_imview', 'test_task_plotms'] |
| 07-Oct-2026 18:27:05 | Running 8 Test(s) |
| 07-Oct-2026 18:27:05 | Cleaning: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/ |
| 07-Oct-2026 18:27:05 | Tests: ['test_imagerhelpers_gclean', 'test_task_deconvolve', 'test_task_feather', 'test_task_makemask', 'test_task_sdintimaging', 'test_task_setjy', 'test_task_tclean', 'test_task_tsdimaging'] |
| 07-Oct-2026 18:27:05 | Fetching Repository: casa6 |
| 07-Oct-2026 18:27:05 | Running: git clone https://open-bitbucket.nrao.edu/scm/casa/casa6 |
| 07-Oct-2026 18:27:05 | Running: git checkout origin/CAS-14900 |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Fetching Repository: casampi |
| 07-Oct-2026 18:27:05 | Running: git clone https://open-bitbucket.nrao.edu/scm/casa/casampi |
| 07-Oct-2026 18:27:05 | Tag: tags/0.5.9 |
| 07-Oct-2026 18:27:05 | Running: git checkout tags/0.5.9 |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Fetching Repository: casaplotms |
| 07-Oct-2026 18:27:05 | Running: git clone https://open-bitbucket.nrao.edu/scm/casa/casaplotms |
| 07-Oct-2026 18:27:05 | Tag: tags/2.8.2 |
| 07-Oct-2026 18:27:05 | Running: git checkout tags/2.8.2 |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Fetching Repository: casaviewer |
| 07-Oct-2026 18:27:05 | Running: git clone https://open-bitbucket.nrao.edu/scm/casa/casaviewer |
| 07-Oct-2026 18:27:05 | Tag: tags/2.4.4 |
| 07-Oct-2026 18:27:05 | Running: git checkout tags/2.4.4 |
| 07-Oct-2026 18:27:05 | Directory Of Tests: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/tests/ |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_makemask/ |
| 07-Oct-2026 18:27:05 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_makemask |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_makemask/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_makemask/ |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_imagerhelpers_gclean/ |
| 07-Oct-2026 18:27:05 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_imagerhelpers_gclean |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_imagerhelpers_gclean/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_imagerhelpers_gclean/ |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_tsdimaging/ |
| 07-Oct-2026 18:27:05 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_tsdimaging |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_tsdimaging/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_tsdimaging/ |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_tclean/ |
| 07-Oct-2026 18:27:05 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_tclean |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_tclean/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_tclean/ |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_sdintimaging/ |
| 07-Oct-2026 18:27:05 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_sdintimaging |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_sdintimaging/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_sdintimaging/ |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_setjy/ |
| 07-Oct-2026 18:27:05 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_setjy |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_setjy/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_setjy/ |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_deconvolve/ |
| 07-Oct-2026 18:27:05 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_deconvolve |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_deconvolve/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_deconvolve/ |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_feather/ |
| 07-Oct-2026 18:27:05 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_feather |
| 07-Oct-2026 18:27:05 | |
| 07-Oct-2026 18:27:05 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/xml/test_task_feather/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312/casa6/casatestutils/nosedir/test_task_feather/ |
| 07-Oct-2026 18:27:05 | a nosedir |
| 07-Oct-2026 18:27:05 | a nosedir/test_imagerhelpers_gclean |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_tsdimaging |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_makemask |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_deconvolve |
| 07-Oct-2026 18:27:05 | a nosedir/summary_of_failed.log |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_tclean |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_feather |
| 07-Oct-2026 18:27:05 | a nosedir/xml |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_sdintimaging |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_setjy |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_setjy/test_task_setjy.py |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_setjy/conftest.py |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_setjy/short_summary.log |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_setjy/casa-20261007-222403.log |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_sdintimaging/test_task_sdintimaging.py |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_sdintimaging/conftest.py |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_sdintimaging/short_summary.log |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_sdintimaging/casa-20261007-221440.log |
| 07-Oct-2026 18:27:05 | a nosedir/xml/test_imagerhelpers_gclean |
| 07-Oct-2026 18:27:05 | a nosedir/xml/test_task_tsdimaging |
| 07-Oct-2026 18:27:05 | a nosedir/xml/test_task_makemask |
| 07-Oct-2026 18:27:05 | a nosedir/xml/test_task_deconvolve |
| 07-Oct-2026 18:27:05 | a nosedir/xml/test_task_tclean |
| 07-Oct-2026 18:27:05 | a nosedir/xml/test_task_feather |
| 07-Oct-2026 18:27:05 | a nosedir/xml/test_task_sdintimaging |
| 07-Oct-2026 18:27:05 | a nosedir/xml/test_task_setjy |
| 07-Oct-2026 18:27:05 | a nosedir/xml/test_task_setjy/nose.xml |
| 07-Oct-2026 18:27:05 | a nosedir/xml/test_task_sdintimaging/nose.xml |
| 07-Oct-2026 18:27:05 | a nosedir/xml/test_task_feather/nose.xml |
| 07-Oct-2026 18:27:05 | a nosedir/xml/test_task_tclean/nose.xml |
| 07-Oct-2026 18:27:05 | a nosedir/xml/test_task_deconvolve/nose.xml |
| 07-Oct-2026 18:27:05 | a nosedir/xml/test_task_makemask/nose.xml |
| 07-Oct-2026 18:27:05 | a nosedir/xml/test_task_tsdimaging/nose.xml |
| 07-Oct-2026 18:27:05 | a nosedir/xml/test_imagerhelpers_gclean/nose.xml |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_feather/test_task_feather.py |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_feather/conftest.py |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_feather/casa-20261007-222703.log |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_feather/short_summary.log |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_tclean/conftest.py |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_tclean/casa-20261007-214625.log |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_tclean/short_summary.log |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_tclean/test_task_tclean.py |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_deconvolve/conftest.py |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_deconvolve/test_task_deconvolve.py |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_deconvolve/casa-20261007-222446.log |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_deconvolve/testlog.log |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_deconvolve/short_summary.log |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_makemask/conftest.py |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_makemask/elliptical_annulus_crtf.txt |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_makemask/casa-20261007-214326.log |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_makemask/test_task_makemask.py |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_makemask/short_summary.log |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_tsdimaging/conftest.py |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_tsdimaging/casa-20261007-214452.log |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_tsdimaging/test_task_tsdimaging.py |
| 07-Oct-2026 18:27:05 | a nosedir/test_task_tsdimaging/short_summary.log |
| 07-Oct-2026 18:27:05 | a nosedir/test_imagerhelpers_gclean/conftest.py |
| 07-Oct-2026 18:27:05 | a nosedir/test_imagerhelpers_gclean/casa-20261007-214355.log |
| 07-Oct-2026 18:27:05 | a nosedir/test_imagerhelpers_gclean/test_imagerhelpers_gclean.py |
| 07-Oct-2026 18:27:05 | a nosedir/test_imagerhelpers_gclean/short_summary.log |
| 07-Oct-2026 18:27:05 | Finished task 'Test wheel' with result: Success |
| 07-Oct-2026 18:27:05 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
| 07-Oct-2026 18:27:05 | Parsing test results under /Users/casaci/bamboohome/xml-data/build-dir/CASASPECS-DEVTESTPY312161-TTARM15PY312... |
| 07-Oct-2026 18:27:05 | Finished task 'Parse tests' with result: Success |
| 07-Oct-2026 18:27:05 | Running post build plugin 'Docker Container Cleanup' |
| 07-Oct-2026 18:27:05 | Running post build plugin 'NCover Results Collector' |
| 07-Oct-2026 18:27:05 | Running post build plugin 'Build Results Label Collector' |
| 07-Oct-2026 18:27:05 | Running post build plugin 'Clover Results Collector' |
| 07-Oct-2026 18:27:05 | Running post build plugin 'npm Cache Cleanup' |
| 07-Oct-2026 18:27:05 | Running post build plugin 'Artifact Copier' |
| 07-Oct-2026 18:27:05 | Publishing an artifact: requirements.txt |
| 07-Oct-2026 18:27:05 | Finished publishing of artifact Non required job artifact Http Compression On : [requirements.txt], patterns: [requirements.txt] anchored at: [wheeldirectory/] in 77.60 ms |
| 07-Oct-2026 18:27:05 | Publishing an artifact: Workdir |
| 07-Oct-2026 18:27:05 | Finished publishing of artifact Non required job artifact Http Compression On : [Workdir], patterns: [work*.tar.gz] anchored at: [wheeldirectory/] in 53.34 ms |
| 07-Oct-2026 18:27:05 | Finalising the build... |
| 07-Oct-2026 18:27:05 | Stopping timer. |
| 07-Oct-2026 18:27:05 | Build CASASPECS-DEVTESTPY312161-TTARM15PY312-2 completed. |
| 07-Oct-2026 18:27:05 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
| 07-Oct-2026 18:27:05 | Running on server: post build plugin 'NCover Results Collector' |
| 07-Oct-2026 18:27:05 | Running on server: post build plugin 'Build Labeller' |
| 07-Oct-2026 18:27:05 | Running on server: post build plugin 'Clover Delta Calculator' |
| 07-Oct-2026 18:27:05 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
| 07-Oct-2026 18:27:05 | All post build plugins have finished |
| 07-Oct-2026 18:27:05 | Generating build results summary... |
| 07-Oct-2026 18:27:05 | Saving build results to disk... |
| 07-Oct-2026 18:27:05 | Store variable context... |
| 07-Oct-2026 18:27:05 | Finished building CASASPECS-DEVTESTPY312161-TTARM15PY312-2. |