Build log

The build generated 6,885 lines of output. The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.

10-Sep-2026 23:16:43	SKIPPED (because test 90 fails)
10-Sep-2026 23:16:43
10-Sep-2026 23:16:44	test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_startmodel_basic_copy
10-Sep-2026 23:16:44	[mtmfsimgval] test_mtmfsimgval_startmodel_basic_copy
10-Sep-2026 23:16:44	PASSED
10-Sep-2026 23:16:44
10-Sep-2026 23:16:44	test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_startmodel_csysmismatch
10-Sep-2026 23:16:44	[mtmfsimgval] test_mtmfsimgval_startmodel_csysmismatch
10-Sep-2026 23:16:44	PASSED
10-Sep-2026 23:16:44
10-Sep-2026 23:16:44	test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_startmodel_dne 2026-09-11 03:16:44 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Internal Error: parameter startmodel set to "doesnotexists.model" but that file does not exist
10-Sep-2026 23:16:44	2026-09-11 03:16:44 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Internal Error: parameter startmodel set to "doesnotexists.model" but that file does not exist
10-Sep-2026 23:16:44
10-Sep-2026 23:16:44	[mtmfsimgval] test_mtmfsimgval_startmodel_dne
10-Sep-2026 23:16:44	PASSED
10-Sep-2026 23:16:44
10-Sep-2026 23:16:44	test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_startmodel_empty
10-Sep-2026 23:16:44	[mtmfsimgval] test_mtmfsimgval_startmodel_empty
10-Sep-2026 23:16:44	PASSED
10-Sep-2026 23:16:44
10-Sep-2026 23:16:44	test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_startmodel_model_exists 2026-09-11 03:16:45 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Internal Error: imagename.model already exists! Either parameter startmodel must not be set ('') or imagename.model (tst.model.tt1) must not exist.
10-Sep-2026 23:16:44	2026-09-11 03:16:45 SEVERE deconvolve::deconvolve::casa+ Either unset startmodel or remove tst.model.tt1 to continue
10-Sep-2026 23:16:44	2026-09-11 03:16:45 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Internal Error: imagename.model already exists! Either parameter startmodel must not be set ('') or imagename.model (tst.model.tt1) must not exist.
10-Sep-2026 23:16:44	2026-09-11 03:16:45 SEVERE deconvolve::::casa+ Either unset startmodel or remove tst.model.tt1 to continue
10-Sep-2026 23:16:44
10-Sep-2026 23:16:44	[mtmfsimgval] test_mtmfsimgval_startmodel_model_exists
10-Sep-2026 23:16:44	PASSED
10-Sep-2026 23:16:44
10-Sep-2026 23:16:45	test_task_deconvolve.py::test_mtmfsimgval::test_mtmfsimgval_startmodel_shapemismatch
10-Sep-2026 23:16:45	[mtmfsimgval] test_mtmfsimgval_startmodel_shapemismatch
10-Sep-2026 23:16:45	PASSED
10-Sep-2026 23:16:45
10-Sep-2026 23:16:46	test_task_deconvolve.py::test_residual_update::test_residual_update_clark
10-Sep-2026 23:16:46	[residual_update] test_residual_update_clark
10-Sep-2026 23:16:46	/opt/casa/data/casatestdata/unittest/deconvolve/
10-Sep-2026 23:16:46	refim_eptwochan
10-Sep-2026 23:16:46	PASSED
10-Sep-2026 23:16:46
10-Sep-2026 23:16:47	test_task_deconvolve.py::test_residual_update::test_residual_update_clarkstokes
10-Sep-2026 23:16:47	[residual_update] test_residual_update_clarkstokes
10-Sep-2026 23:16:47	/opt/casa/data/casatestdata/unittest/deconvolve/
10-Sep-2026 23:16:47	refim_point_linRL
10-Sep-2026 23:16:47	PASSED
10-Sep-2026 23:16:47
10-Sep-2026 23:16:48	test_task_deconvolve.py::test_residual_update::test_residual_update_hogbom
10-Sep-2026 23:16:48	[residual_update] test_residual_update_hogbom
10-Sep-2026 23:16:48	/opt/casa/data/casatestdata/unittest/deconvolve/
10-Sep-2026 23:16:48	refim_eptwochan
10-Sep-2026 23:16:48	PASSED
10-Sep-2026 23:16:48
10-Sep-2026 23:16:48	test_task_deconvolve.py::test_residual_update::test_residual_update_mtmfs 2026-09-11 03:16:49 WARN tclean::task_tclean::casa For specmode='mfs' and deconvolver='mtmfs', the option of pbcor=True divides each restored Taylor coefficient image by the pb.tt0 image. This correction ignores the frequency-dependence of the primary beam and does not correct for PB spectral index. It is scientifically valid only for small fractional bandwidths. For more accurate wideband primary beam correction (if needed), please use one of the following options : (1) specmode='mvc' with gridder='standard' or 'mosaic' with pbcor=True, (2) conjbeams=True and wbawp=True with gridder='awproject' and pbcor=True.
10-Sep-2026 23:16:51
10-Sep-2026 23:16:51	[residual_update] test_residual_update_mtmfs
10-Sep-2026 23:16:51	/opt/casa/data/casatestdata/unittest/deconvolve/
10-Sep-2026 23:16:51	refim_eptwochan
10-Sep-2026 23:16:51	PASSED
10-Sep-2026 23:16:51
10-Sep-2026 23:16:53	test_task_deconvolve.py::test_residual_update::test_residual_update_multiscale
10-Sep-2026 23:16:53	[residual_update] test_residual_update_multiscale
10-Sep-2026 23:16:53	/opt/casa/data/casatestdata/unittest/deconvolve/
10-Sep-2026 23:16:53	refim_eptwochan
10-Sep-2026 23:16:53	PASSED
10-Sep-2026 23:16:53
10-Sep-2026 23:16:56	test_task_deconvolve.py::test_restoration::test_restoration_basic
10-Sep-2026 23:16:56	[restoration] test_restoration_basic
10-Sep-2026 23:16:56	PASSED
10-Sep-2026 23:16:56
10-Sep-2026 23:16:56	test_task_deconvolve.py::test_restoration::test_restoration_bigbeam
10-Sep-2026 23:16:56	[restoration] test_restoration_bigbeam
10-Sep-2026 23:16:56	PASSED
10-Sep-2026 23:16:56
10-Sep-2026 23:16:56	test_task_deconvolve.py::test_restoration::test_restoration_none
10-Sep-2026 23:16:56	[restoration] test_restoration_none
10-Sep-2026 23:16:56	PASSED
10-Sep-2026 23:16:56
10-Sep-2026 23:16:56	test_task_deconvolve.py::test_restoration::test_restoration_onlyrestore
10-Sep-2026 23:16:56	[restoration] test_restoration_onlyrestore
10-Sep-2026 23:16:56	PASSED
10-Sep-2026 23:16:56
10-Sep-2026 23:16:58	test_task_deconvolve.py::test_niterparms::test_niterparms_gain_1
10-Sep-2026 23:16:58	[niterparms] test_niterparms_gain_1
10-Sep-2026 23:16:58	PASSED
10-Sep-2026 23:16:58
10-Sep-2026 23:16:58	test_task_deconvolve.py::test_niterparms::test_niterparms_gain_2
10-Sep-2026 23:16:58	[niterparms] test_niterparms_gain_2
10-Sep-2026 23:16:58	PASSED
10-Sep-2026 23:16:58
10-Sep-2026 23:16:58	test_task_deconvolve.py::test_niterparms::test_niterparms_nsigma_1
10-Sep-2026 23:16:58	[niterparms] test_niterparms_nsigma_1
10-Sep-2026 23:16:58	PASSED
10-Sep-2026 23:16:58
10-Sep-2026 23:16:58	test_task_deconvolve.py::test_niterparms::test_niterparms_nsigma_2
10-Sep-2026 23:16:58	[niterparms] test_niterparms_nsigma_2
10-Sep-2026 23:16:58	PASSED
10-Sep-2026 23:16:58
10-Sep-2026 23:16:59	test_task_deconvolve.py::test_niterparms::test_niterparms_threshold_1
10-Sep-2026 23:16:59	[niterparms] test_niterparms_threshold_1
10-Sep-2026 23:16:59	PASSED
10-Sep-2026 23:16:59
10-Sep-2026 23:16:59	test_task_deconvolve.py::test_niterparms::test_niterparms_threshold_2
10-Sep-2026 23:16:59	[niterparms] test_niterparms_threshold_2
10-Sep-2026 23:16:59	PASSED
10-Sep-2026 23:16:59
10-Sep-2026 23:16:59	test_task_deconvolve.py::test_niterparms::test_niterparms_threshold_3
10-Sep-2026 23:16:59	[niterparms] test_niterparms_threshold_3
10-Sep-2026 23:16:59	PASSED
10-Sep-2026 23:16:59
10-Sep-2026 23:16:59	test_task_deconvolve.py::test_niterparms::test_niterparms_unset
10-Sep-2026 23:16:59	[niterparms] test_niterparms_unset
10-Sep-2026 23:16:59	PASSED
10-Sep-2026 23:16:59
10-Sep-2026 23:17:02	test_task_deconvolve.py::test_minimages::test_minimages_cutthreshold 2026-09-11 03:17:03 WARN SDMaskHandler::autoMaskByMultiThreshold (file /source/casa6/casatools/src/code/synthesis/ImagerObjects/SDMaskHandler.cc, line 2247) Faint regions may not be included in the final mask. Consider decreasing cutthreshold.
10-Sep-2026 23:17:02
10-Sep-2026 23:17:02	[minimages] test_minimages_cutthreshold
10-Sep-2026 23:17:02	PASSED
10-Sep-2026 23:17:02
10-Sep-2026 23:17:03	test_task_deconvolve.py::test_minimages::test_minimages_deconvolver_clark
10-Sep-2026 23:17:03	[minimages] test_minimages_deconvolver_clark
10-Sep-2026 23:17:03	PASSED
10-Sep-2026 23:17:03
10-Sep-2026 23:17:03	test_task_deconvolve.py::test_minimages::test_minimages_deconvolver_mtmfs 2026-09-11 03:17:03 WARN tclean::task_tclean::casa For specmode='mfs' and deconvolver='mtmfs', the option of pbcor=True divides each restored Taylor coefficient image by the pb.tt0 image. This correction ignores the frequency-dependence of the primary beam and does not correct for PB spectral index. It is scientifically valid only for small fractional bandwidths. For more accurate wideband primary beam correction (if needed), please use one of the following options : (1) specmode='mvc' with gridder='standard' or 'mosaic' with pbcor=True, (2) conjbeams=True and wbawp=True with gridder='awproject' and pbcor=True.
10-Sep-2026 23:17:09
10-Sep-2026 23:17:09	[minimages] test_minimages_deconvolver_mtmfs
10-Sep-2026 23:17:09	/opt/casa/data/casatestdata/unittest/deconvolve/
10-Sep-2026 23:17:09	refim_point
10-Sep-2026 23:17:09	PASSED
10-Sep-2026 23:17:09
10-Sep-2026 23:17:09	test_task_deconvolve.py::test_minimages::test_minimages_deconvolver_multiscale
10-Sep-2026 23:17:09	[minimages] test_minimages_deconvolver_multiscale
10-Sep-2026 23:17:09	PASSED
10-Sep-2026 23:17:09
10-Sep-2026 23:17:09	test_task_deconvolve.py::test_minimages::test_minimages_dogrowprune
10-Sep-2026 23:17:09	[minimages] test_minimages_dogrowprune
10-Sep-2026 23:17:09	PASSED
10-Sep-2026 23:17:09
10-Sep-2026 23:17:09	test_task_deconvolve.py::test_minimages::test_minimages_fastnoise
10-Sep-2026 23:17:09	[minimages] test_minimages_fastnoise
10-Sep-2026 23:17:09	PASSED
10-Sep-2026 23:17:09
10-Sep-2026 23:17:09	test_task_deconvolve.py::test_minimages::test_minimages_fullsummary
10-Sep-2026 23:17:09	[minimages] test_minimages_fullsummary
10-Sep-2026 23:17:09	PASSED
10-Sep-2026 23:17:09
10-Sep-2026 23:17:09	test_task_deconvolve.py::test_minimages::test_minimages_gain
10-Sep-2026 23:17:09	[minimages] test_minimages_gain
10-Sep-2026 23:17:09	PASSED
10-Sep-2026 23:17:09
10-Sep-2026 23:17:09	test_task_deconvolve.py::test_minimages::test_minimages_growiterations
10-Sep-2026 23:17:09	[minimages] test_minimages_growiterations
10-Sep-2026 23:17:09	PASSED
10-Sep-2026 23:17:09
10-Sep-2026 23:17:09	test_task_deconvolve.py::test_minimages::test_minimages_lownoisethreshold
10-Sep-2026 23:17:09	[minimages] test_minimages_lownoisethreshold
10-Sep-2026 23:17:09	PASSED
10-Sep-2026 23:17:09
10-Sep-2026 23:17:09	test_task_deconvolve.py::test_minimages::test_minimages_mask
10-Sep-2026 23:17:09	[minimages] test_minimages_mask
10-Sep-2026 23:17:09	PASSED
10-Sep-2026 23:17:09
10-Sep-2026 23:17:09	test_task_deconvolve.py::test_minimages::test_minimages_minbeamfrac
10-Sep-2026 23:17:09	[minimages] test_minimages_minbeamfrac
10-Sep-2026 23:17:09	PASSED
10-Sep-2026 23:17:09
10-Sep-2026 23:17:09	test_task_deconvolve.py::test_minimages::test_minimages_negativethreshold
10-Sep-2026 23:17:09	[minimages] test_minimages_negativethreshold
10-Sep-2026 23:17:09	PASSED
10-Sep-2026 23:17:09
10-Sep-2026 23:17:09	test_task_deconvolve.py::test_minimages::test_minimages_niter
10-Sep-2026 23:17:09	[minimages] test_minimages_niter
10-Sep-2026 23:17:09	PASSED
10-Sep-2026 23:17:09
10-Sep-2026 23:17:10	test_task_deconvolve.py::test_minimages::test_minimages_noisethreshold
10-Sep-2026 23:17:10	[minimages] test_minimages_noisethreshold
10-Sep-2026 23:17:10	PASSED
10-Sep-2026 23:17:10
10-Sep-2026 23:17:10	test_task_deconvolve.py::test_minimages::test_minimages_nsigma
10-Sep-2026 23:17:10	[minimages] test_minimages_nsigma
10-Sep-2026 23:17:10	PASSED
10-Sep-2026 23:17:10
10-Sep-2026 23:17:10	test_task_deconvolve.py::test_minimages::test_minimages_nsigma_mtmfs 2026-09-11 03:17:10 WARN tclean::task_tclean::casa For specmode='mfs' and deconvolver='mtmfs', the option of pbcor=True divides each restored Taylor coefficient image by the pb.tt0 image. This correction ignores the frequency-dependence of the primary beam and does not correct for PB spectral index. It is scientifically valid only for small fractional bandwidths. For more accurate wideband primary beam correction (if needed), please use one of the following options : (1) specmode='mvc' with gridder='standard' or 'mosaic' with pbcor=True, (2) conjbeams=True and wbawp=True with gridder='awproject' and pbcor=True.
10-Sep-2026 23:17:16
10-Sep-2026 23:17:16	[minimages] test_minimages_nsigma
10-Sep-2026 23:17:16	/opt/casa/data/casatestdata/unittest/deconvolve/
10-Sep-2026 23:17:16	refim_point
10-Sep-2026 23:17:16	PASSED
10-Sep-2026 23:17:16
10-Sep-2026 23:17:16	test_task_deconvolve.py::test_minimages::test_minimages_nsigma_nopb 2026-09-11 03:17:16 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : The parameter nsigma>0 (1.5) requires a .pb image to be available.
10-Sep-2026 23:17:16	2026-09-11 03:17:16 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : The parameter nsigma>0 (1.5) requires a .pb image to be available.
10-Sep-2026 23:17:16
10-Sep-2026 23:17:16	[minimages] test_minimages_nsigma
10-Sep-2026 23:17:16	PASSED
10-Sep-2026 23:17:16
10-Sep-2026 23:17:16	test_task_deconvolve.py::test_minimages::test_minimages_nsigma_nopb_mtmfs 2026-09-11 03:17:16 WARN tclean::task_tclean::casa For specmode='mfs' and deconvolver='mtmfs', the option of pbcor=True divides each restored Taylor coefficient image by the pb.tt0 image. This correction ignores the frequency-dependence of the primary beam and does not correct for PB spectral index. It is scientifically valid only for small fractional bandwidths. For more accurate wideband primary beam correction (if needed), please use one of the following options : (1) specmode='mvc' with gridder='standard' or 'mosaic' with pbcor=True, (2) conjbeams=True and wbawp=True with gridder='awproject' and pbcor=True.
10-Sep-2026 23:17:21	2026-09-11 03:17:22 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : The parameter nsigma>0 (1.5) requires a .pb.tt0 image to be available.
10-Sep-2026 23:17:21	2026-09-11 03:17:22 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : The parameter nsigma>0 (1.5) requires a .pb.tt0 image to be available.
10-Sep-2026 23:17:21
10-Sep-2026 23:17:21	[minimages] test_minimages_nsigma
10-Sep-2026 23:17:21	/opt/casa/data/casatestdata/unittest/deconvolve/
10-Sep-2026 23:17:21	refim_point
10-Sep-2026 23:17:21	PASSED
10-Sep-2026 23:17:21
10-Sep-2026 23:17:21	test_task_deconvolve.py::test_minimages::test_minimages_restoration
10-Sep-2026 23:17:21	[minimages] test_minimages_restoration
10-Sep-2026 23:17:21	PASSED
10-Sep-2026 23:17:21
10-Sep-2026 23:17:22	test_task_deconvolve.py::test_minimages::test_minimages_restoringbeam 2026-09-11 03:17:22 WARN SIImageStore::rescaleResolution (file /source/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 1663) Cannot convolve to new beam for Channel : 0 : Source may be only (slightly) resolved in one direction
10-Sep-2026 23:17:22
10-Sep-2026 23:17:22	[minimages] test_minimages_restoringbeam
10-Sep-2026 23:17:22	PASSED
10-Sep-2026 23:17:22
10-Sep-2026 23:17:22	test_task_deconvolve.py::test_minimages::test_minimages_sidelobethreshold 2026-09-11 03:17:22 WARN SDMaskHandler::autoMaskByMultiThreshold (file /source/casa6/casatools/src/code/synthesis/ImagerObjects/SDMaskHandler.cc, line 3087) No regions found by automasking
10-Sep-2026 23:17:22	2026-09-11 03:17:22 WARN SDMaskHandler::autoMaskByMultiThreshold (file /source/casa6/casatools/src/code/synthesis/ImagerObjects/SDMaskHandler.cc, line 3087) Used sidelobe threshold to mask, but no emission was found.Try decreasing your sidelobethreshold parameter if you want to capture emission in these channels.
10-Sep-2026 23:17:22	2026-09-11 03:17:22 WARN SIImageStore::restore (file /source/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2353) Restoring with an empty model image. Only residuals will be processed to form the output restored image.
10-Sep-2026 23:17:22
10-Sep-2026 23:17:22	[minimages] test_minimages_sidelobethreshold
10-Sep-2026 23:17:22	PASSED
10-Sep-2026 23:17:22
10-Sep-2026 23:17:22	test_task_deconvolve.py::test_minimages::test_minimages_smallscalebias
10-Sep-2026 23:17:22	[minimages] test_minimages_smallscalebias
10-Sep-2026 23:17:22	PASSED
10-Sep-2026 23:17:22
10-Sep-2026 23:17:22	test_task_deconvolve.py::test_minimages::test_minimages_smoothfactor
10-Sep-2026 23:17:22	[minimages] test_minimages_smoothfactor
10-Sep-2026 23:17:22	PASSED
10-Sep-2026 23:17:22
10-Sep-2026 23:17:22	test_task_deconvolve.py::test_minimages::test_minimages_threshold
10-Sep-2026 23:17:22	[minimages] test_minimages_threshold
10-Sep-2026 23:17:22	PASSED
10-Sep-2026 23:17:22
10-Sep-2026 23:17:22	test_task_deconvolve.py::test_minimages::test_minimages_usemask 2026-09-11 03:17:22 SEVERE deconvolve::deconvolve::casa Exception from deconvolve : Need PB/Sensitivity/Weight image before a PB-based mask can be made for tst
10-Sep-2026 23:17:22	2026-09-11 03:17:22 SEVERE deconvolve::::casa Task deconvolve raised an exception of class RuntimeError with the following message: Exception from deconvolve : Need PB/Sensitivity/Weight image before a PB-based mask can be made for tst
10-Sep-2026 23:17:22
10-Sep-2026 23:17:22	[minimages] test_minimages_usemask
10-Sep-2026 23:17:22	PASSED
10-Sep-2026 23:17:22
10-Sep-2026 23:17:22	test_task_deconvolve.py::test_minimages::test_minimages_verbose
10-Sep-2026 23:17:22	[minimages] test_minimages_verbose
10-Sep-2026 23:17:22	PASSED
10-Sep-2026 23:17:22
10-Sep-2026 23:17:22	- generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_task_deconvolve/nose.xml -
10-Sep-2026 23:17:22	=========================== short test summary info ============================
10-Sep-2026 23:17:22	SKIPPED [1] test_task_deconvolve.py:2501: It makes other tests fail
10-Sep-2026 23:17:22	SKIPPED [1] test_task_deconvolve.py:2840: because test 90 fails
10-Sep-2026 23:17:22	============ 141 passed, 2 skipped, 2 warnings in 405.21s (0:06:45) ============
10-Sep-2026 23:17:22	============================= test session starts ==============================
10-Sep-2026 23:17:22	platform linux -- Python 3.12.9, pytest-9.1.1, pluggy-1.6.0 -- /home/casatest/venv/bin/python3.12
10-Sep-2026 23:17:22	cachedir: .pytest_cache
10-Sep-2026 23:17:22	rootdir: /home/casatest/casa6/casatestutils/nosedir/test_task_sdintimaging
10-Sep-2026 23:17:22	configfile: pytest.ini
10-Sep-2026 23:17:23	collecting ... 2026-09-11 03:17:24 WARN ::casa casampi not available - not testing MPIEnvironment stuff
10-Sep-2026 23:17:23	collected 21 items
10-Sep-2026 23:17:23
10-Sep-2026 23:17:23
10-Sep-2026 23:17:25	test_task_sdintimaging.py::test_singlepointing::test_singlepointing_cube_intonly 2026-09-11 03:17:26 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:27	2026-09-11 03:17:27 SEVERE MatrixCleaner::clean() (file /source/casa6/casatools/src/code/synthesis/MeasurementEquations/MatrixCleaner.cc, line 332) As Peak of PSF is negative, you should setscales again with a smaller scale size
10-Sep-2026 23:17:27	2026-09-11 03:17:27 WARN SDAlgorithmMSClean::takeOneStep (file /source/casa6/casatools/src/code/synthesis/ImagerObjects/SDAlgorithmMSClean.cc, line 185) MSClean minor cycle stopped on cleaning consecutive smallest scale
10-Sep-2026 23:17:28
10-Sep-2026 23:17:28	[singlePointing] Test_singlepointing_cube_intonly
10-Sep-2026 23:17:28	PASSED
10-Sep-2026 23:17:28
10-Sep-2026 23:17:29	test_task_sdintimaging.py::test_singlepointing::test_singlepointing_cube_nmajor 2026-09-11 03:17:30 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:29	2026-09-11 03:17:30 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:29	2026-09-11 03:17:30 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:29	2026-09-11 03:17:30 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:29	2026-09-11 03:17:30 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:29	2026-09-11 03:17:30 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:29	2026-09-11 03:17:30 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:29	2026-09-11 03:17:30 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:30	2026-09-11 03:17:30 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:30	2026-09-11 03:17:30 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:30	2026-09-11 03:17:30 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:30	2026-09-11 03:17:30 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:30	2026-09-11 03:17:31 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:31	2026-09-11 03:17:32 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:31	2026-09-11 03:17:32 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:31	2026-09-11 03:17:32 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:33	2026-09-11 03:17:33 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:33	2026-09-11 03:17:33 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:33	2026-09-11 03:17:33 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:33
10-Sep-2026 23:17:33	[singlePointing] Test_singlepointing_cube_nmajor
10-Sep-2026 23:17:33	PASSED
10-Sep-2026 23:17:33
10-Sep-2026 23:17:35	test_task_sdintimaging.py::test_singlepointing::test_singlepointing_cube_sdint 2026-09-11 03:17:35 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:35	2026-09-11 03:17:35 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:35	2026-09-11 03:17:35 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:35	2026-09-11 03:17:35 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:35	2026-09-11 03:17:35 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:35	2026-09-11 03:17:35 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:35	2026-09-11 03:17:35 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:35	2026-09-11 03:17:35 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:35	2026-09-11 03:17:36 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:35	2026-09-11 03:17:36 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:35	2026-09-11 03:17:36 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:35	2026-09-11 03:17:36 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:36	2026-09-11 03:17:36 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:39	2026-09-11 03:17:39 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:39	2026-09-11 03:17:39 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:39	2026-09-11 03:17:39 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:39
10-Sep-2026 23:17:39	[singlePointing] Test_singlepointing_cube_sdint
10-Sep-2026 23:17:39	PASSED
10-Sep-2026 23:17:39
10-Sep-2026 23:17:40	test_task_sdintimaging.py::test_singlepointing::test_singlepointing_cube_sdint_flagged 2026-09-11 03:17:40 WARN SIImageStore::getPSFGaussian (file /source/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2144) PSF is blank for[C2:P0]
10-Sep-2026 23:17:40	2026-09-11 03:17:41 WARN SIImageStore::getPSFGaussian (file /source/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2144) PSF is blank for[C2:P0]
10-Sep-2026 23:17:41	2026-09-11 03:17:41 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:41	2026-09-11 03:17:41 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:41	2026-09-11 03:17:41 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:41	2026-09-11 03:17:41 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:41	2026-09-11 03:17:41 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:41	2026-09-11 03:17:41 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:41	2026-09-11 03:17:41 WARN sdintimaging::::casa There are channels that are filled with zeros either in the INT cube or the SD cube or both, and they will be ignored from the joint reconstruction. Please search the log file for the string "channel weights/flags" to find a listing of channels that are being used
10-Sep-2026 23:17:41	2026-09-11 03:17:41 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:41	2026-09-11 03:17:41 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:41	2026-09-11 03:17:41 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:41	2026-09-11 03:17:42 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:41	2026-09-11 03:17:42 WARN SIImageStore::getPSFGaussian (file /source/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2144) PSF is blank for[C2:P0]
10-Sep-2026 23:17:41	2026-09-11 03:17:42 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:44	2026-09-11 03:17:44 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:44	2026-09-11 03:17:44 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:44
10-Sep-2026 23:17:44	[singlePointing] Test_singlepointing_cube_sdint_flagged
10-Sep-2026 23:17:44	PASSED
10-Sep-2026 23:17:44
10-Sep-2026 23:17:44	test_task_sdintimaging.py::test_singlepointing::test_singlepointing_cube_sdonly 2026-09-11 03:17:45 WARN sdintimaging::task_sdintimaging::casa The Single-Dish-Only mode of sdintimaging is better supported via the deconvolve task which supports spectral cube, mfs and multi-term mfs deconvolution in the image domain alone. The deconvolve task is the more appropriate version to use for stand-alone image-domain deconvolution, and will not have the bookkeeping overheads currently present in the sdintimaging task's sd-only mode. Please note that the 'sd' option of the sdintimaging task will be removed in a subsequent release. Please refer to the task deconvolve documentation for instructions on how to prepare image and psf cubes for the deconvolve task for all these modes.
10-Sep-2026 23:17:45	2026-09-11 03:17:46 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:45	2026-09-11 03:17:46 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:46	2026-09-11 03:17:46 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:46	2026-09-11 03:17:46 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:46	2026-09-11 03:17:46 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:46	2026-09-11 03:17:46 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:46	2026-09-11 03:17:46 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:48
10-Sep-2026 23:17:48	[singlePointing] Test_singlepointing_cube_sdonly
10-Sep-2026 23:17:48	PASSED
10-Sep-2026 23:17:48
10-Sep-2026 23:17:50	test_task_sdintimaging.py::test_singlepointing::test_singlepointing_mfs_intonly 2026-09-11 03:17:50 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:57
10-Sep-2026 23:17:57	[singlePointing] Test_singlepointing_mfs_intonly
10-Sep-2026 23:17:57	PASSED
10-Sep-2026 23:17:57
10-Sep-2026 23:17:58	test_task_sdintimaging.py::test_singlepointing::test_singlepointing_mfs_sdint 2026-09-11 03:17:59 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:58	2026-09-11 03:17:59 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:58	2026-09-11 03:17:59 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:58	2026-09-11 03:17:59 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:58	2026-09-11 03:17:59 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:17:58	2026-09-11 03:17:59 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:58	2026-09-11 03:17:59 WARN sdintimaging::task_sdintimaging::casa The cube for the major cycle has only 3 channels. A minimum of nterms = 2 channels is required for an accurate polynomial fit, but where possible at least 5 to 10 channels that span the frequency range are prefered in order to properly encode frequency dependent intensity and weights.
10-Sep-2026 23:17:58	2026-09-11 03:17:59 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:58	2026-09-11 03:17:59 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:59	2026-09-11 03:17:59 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:59	2026-09-11 03:17:59 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:59	2026-09-11 03:17:59 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:59	2026-09-11 03:17:59 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:17:59	2026-09-11 03:18:00 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:18:02	2026-09-11 03:18:03 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:02	2026-09-11 03:18:03 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:02	2026-09-11 03:18:03 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:04	2026-09-11 03:18:05 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:05	2026-09-11 03:18:05 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:05	2026-09-11 03:18:05 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:07	2026-09-11 03:18:07 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:07	2026-09-11 03:18:07 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:07	2026-09-11 03:18:08 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:09	2026-09-11 03:18:10 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:09	2026-09-11 03:18:10 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:10	2026-09-11 03:18:10 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:12	2026-09-11 03:18:12 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:12	2026-09-11 03:18:12 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:12	2026-09-11 03:18:12 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:12
10-Sep-2026 23:18:12	[singlePointing] Test_singlepointing_mfs_sdint
10-Sep-2026 23:18:12	PASSED
10-Sep-2026 23:18:12
10-Sep-2026 23:18:14	test_task_sdintimaging.py::test_singlepointing::test_singlepointing_mfs_sdint_autopsf 2026-09-11 03:18:14 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:18:14	2026-09-11 03:18:14 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:14	2026-09-11 03:18:14 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:18:14	2026-09-11 03:18:14 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:14	2026-09-11 03:18:14 WARN componentlist::close componentlist closed
10-Sep-2026 23:18:14	2026-09-11 03:18:14 WARN componentlist::close componentlist closed
10-Sep-2026 23:18:14	2026-09-11 03:18:15 WARN componentlist::close componentlist closed
10-Sep-2026 23:18:15	2026-09-11 03:18:15 WARN sdintimaging::task_sdintimaging::casa The cube for the major cycle has only 3 channels. A minimum of nterms = 2 channels is required for an accurate polynomial fit, but where possible at least 5 to 10 channels that span the frequency range are prefered in order to properly encode frequency dependent intensity and weights.
10-Sep-2026 23:18:15	2026-09-11 03:18:15 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:15	2026-09-11 03:18:15 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:15	2026-09-11 03:18:15 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:15	2026-09-11 03:18:16 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:15	2026-09-11 03:18:16 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:15	2026-09-11 03:18:16 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:16	2026-09-11 03:18:16 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:18:20	2026-09-11 03:18:20 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:20	2026-09-11 03:18:20 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:20	2026-09-11 03:18:20 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:23	2026-09-11 03:18:24 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:23	2026-09-11 03:18:24 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:23	2026-09-11 03:18:24 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:24
10-Sep-2026 23:18:24	[singlePointing] Test_singlepointing_mfs_sdint_autopsf
10-Sep-2026 23:18:24	PASSED
10-Sep-2026 23:18:24
10-Sep-2026 23:18:24	test_task_sdintimaging.py::test_singlepointing::test_singlepointing_mfs_sdint_flagged 2026-09-11 03:18:25 WARN SIImageStore::getPSFGaussian (file /source/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2144) PSF is blank for[C2:P0]
10-Sep-2026 23:18:25	2026-09-11 03:18:26 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:18:25	2026-09-11 03:18:26 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:25	2026-09-11 03:18:26 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:18:25	2026-09-11 03:18:26 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:25	2026-09-11 03:18:26 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:18:25	2026-09-11 03:18:26 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:25	2026-09-11 03:18:26 WARN sdintimaging::task_sdintimaging::casa The cube for the major cycle has only 3 channels. A minimum of nterms = 2 channels is required for an accurate polynomial fit, but where possible at least 5 to 10 channels that span the frequency range are prefered in order to properly encode frequency dependent intensity and weights.
10-Sep-2026 23:18:25	2026-09-11 03:18:26 WARN sdintimaging::::casa There are channels that are filled with zeros either in the INT cube or the SD cube or both, and they will be ignored from the joint reconstruction. Please search the log file for the string "channel weights/flags" to find a listing of channels that are being used
10-Sep-2026 23:18:25	2026-09-11 03:18:26 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:25	2026-09-11 03:18:26 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:26	2026-09-11 03:18:26 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:26	2026-09-11 03:18:26 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:26	2026-09-11 03:18:26 WARN SIImageStore::getPSFGaussian (file /source/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2144) PSF is blank for[C2:P0]
10-Sep-2026 23:18:26	2026-09-11 03:18:27 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:18:30	2026-09-11 03:18:30 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:30	2026-09-11 03:18:31 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:33	2026-09-11 03:18:34 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:34	2026-09-11 03:18:34 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:34
10-Sep-2026 23:18:34	[singlePointing] Test_singlepointing_mfs_sdint_flagged
10-Sep-2026 23:18:34	PASSED
10-Sep-2026 23:18:34
10-Sep-2026 23:18:34	test_task_sdintimaging.py::test_singlepointing::test_singlepointing_mfs_sdonly 2026-09-11 03:18:35 WARN sdintimaging::task_sdintimaging::casa The Single-Dish-Only mode of sdintimaging is better supported via the deconvolve task which supports spectral cube, mfs and multi-term mfs deconvolution in the image domain alone. The deconvolve task is the more appropriate version to use for stand-alone image-domain deconvolution, and will not have the bookkeeping overheads currently present in the sdintimaging task's sd-only mode. Please note that the 'sd' option of the sdintimaging task will be removed in a subsequent release. Please refer to the task deconvolve documentation for instructions on how to prepare image and psf cubes for the deconvolve task for all these modes.
10-Sep-2026 23:18:35	2026-09-11 03:18:36 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:18:35	2026-09-11 03:18:36 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:35	2026-09-11 03:18:36 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:18:35	2026-09-11 03:18:36 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:35	2026-09-11 03:18:36 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:18:35	2026-09-11 03:18:36 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:35	2026-09-11 03:18:36 WARN sdintimaging::task_sdintimaging::casa The cube for the major cycle has only 3 channels. A minimum of nterms = 2 channels is required for an accurate polynomial fit, but where possible at least 5 to 10 channels that span the frequency range are prefered in order to properly encode frequency dependent intensity and weights.
10-Sep-2026 23:18:36	2026-09-11 03:18:36 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:18:42
10-Sep-2026 23:18:42	[singlePointing] Test_singlepointing_mfs_sdonly
10-Sep-2026 23:18:42	PASSED
10-Sep-2026 23:18:42
10-Sep-2026 23:18:44	test_task_sdintimaging.py::test_singlepointing::test_singlepointing_mtmfs_nmajor 2026-09-11 03:18:44 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:18:44	2026-09-11 03:18:44 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:44	2026-09-11 03:18:44 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:18:44	2026-09-11 03:18:44 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:44	2026-09-11 03:18:44 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:18:44	2026-09-11 03:18:44 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:44	2026-09-11 03:18:44 WARN sdintimaging::task_sdintimaging::casa The cube for the major cycle has only 3 channels. A minimum of nterms = 2 channels is required for an accurate polynomial fit, but where possible at least 5 to 10 channels that span the frequency range are prefered in order to properly encode frequency dependent intensity and weights.
10-Sep-2026 23:18:44	2026-09-11 03:18:44 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:44	2026-09-11 03:18:44 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:44	2026-09-11 03:18:45 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:44	2026-09-11 03:18:45 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:44	2026-09-11 03:18:45 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:44	2026-09-11 03:18:45 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:45	2026-09-11 03:18:45 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:18:47	2026-09-11 03:18:48 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:48	2026-09-11 03:18:48 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:48	2026-09-11 03:18:48 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:50	2026-09-11 03:18:50 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:50	2026-09-11 03:18:50 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:50	2026-09-11 03:18:51 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:18:51
10-Sep-2026 23:18:51	[singlePointing] Test_singlepointing_mtmfs_nmajor
10-Sep-2026 23:18:51	PASSED
10-Sep-2026 23:18:51
10-Sep-2026 23:19:00	test_task_sdintimaging.py::test_mosaic::test_mosaic_cube_intonly
10-Sep-2026 23:19:06	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:19:16
10-Sep-2026 23:19:23	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:19:33
10-Sep-2026 23:19:39	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:19:49
10-Sep-2026 23:19:56	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:19:57	2026-09-11 03:19:57 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:20:04	2026-09-11 03:20:04 SEVERE MatrixCleaner::clean() (file /source/casa6/casatools/src/code/synthesis/MeasurementEquations/MatrixCleaner.cc, line 332) As Peak of PSF is negative, you should setscales again with a smaller scale size
10-Sep-2026 23:20:04	2026-09-11 03:20:04 WARN SDAlgorithmMSClean::takeOneStep (file /source/casa6/casatools/src/code/synthesis/ImagerObjects/SDAlgorithmMSClean.cc, line 185) MSClean minor cycle stopped on cleaning consecutive smallest scale
10-Sep-2026 23:20:14
10-Sep-2026 23:20:32	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:20:33
10-Sep-2026 23:20:33	[Mosaic] Test_mosaic_cube_intonly
10-Sep-2026 23:20:33	PASSED
10-Sep-2026 23:20:33
10-Sep-2026 23:20:43	test_task_sdintimaging.py::test_mosaic::test_mosaic_cube_sdint
10-Sep-2026 23:20:49	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:20:59
10-Sep-2026 23:21:06	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:21:16
10-Sep-2026 23:21:22	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:21:32
10-Sep-2026 23:21:38	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:21:39	2026-09-11 03:21:39 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:21:39	2026-09-11 03:21:39 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:21:39	2026-09-11 03:21:40 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:21:39	2026-09-11 03:21:40 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:21:39	2026-09-11 03:21:40 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:21:39	2026-09-11 03:21:40 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:21:40	2026-09-11 03:21:40 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:21:40	2026-09-11 03:21:41 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:21:41	2026-09-11 03:21:41 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:21:41	2026-09-11 03:21:42 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:21:42	2026-09-11 03:21:42 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:21:42	2026-09-11 03:21:43 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:21:43	2026-09-11 03:21:43 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:22:00
10-Sep-2026 23:22:19	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:22:21	2026-09-11 03:22:21 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:22:21	2026-09-11 03:22:22 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:22:22	2026-09-11 03:22:22 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:22:23
10-Sep-2026 23:22:23	[Mosaic] Test_mosaic_cube_sdint
10-Sep-2026 23:22:23	PASSED
10-Sep-2026 23:22:23
10-Sep-2026 23:22:23	test_task_sdintimaging.py::test_mosaic::test_mosaic_cube_sdonly 2026-09-11 03:22:24 WARN sdintimaging::task_sdintimaging::casa The Single-Dish-Only mode of sdintimaging is better supported via the deconvolve task which supports spectral cube, mfs and multi-term mfs deconvolution in the image domain alone. The deconvolve task is the more appropriate version to use for stand-alone image-domain deconvolution, and will not have the bookkeeping overheads currently present in the sdintimaging task's sd-only mode. Please note that the 'sd' option of the sdintimaging task will be removed in a subsequent release. Please refer to the task deconvolve documentation for instructions on how to prepare image and psf cubes for the deconvolve task for all these modes.
10-Sep-2026 23:22:32
10-Sep-2026 23:22:39	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:22:49
10-Sep-2026 23:22:55	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:23:05
10-Sep-2026 23:23:12	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:23:21
10-Sep-2026 23:23:28	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:23:28	2026-09-11 03:23:29 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:23:28	2026-09-11 03:23:29 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:23:28	2026-09-11 03:23:29 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:23:28	2026-09-11 03:23:29 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:23:29	2026-09-11 03:23:29 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:23:29	2026-09-11 03:23:29 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:23:29	2026-09-11 03:23:30 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:23:40
10-Sep-2026 23:23:40	[Mosaic] Test_mosaic_cube_sdonly
10-Sep-2026 23:23:40	PASSED
10-Sep-2026 23:23:40
10-Sep-2026 23:23:49	test_task_sdintimaging.py::test_mosaic::test_mosaic_mfs_intonly
10-Sep-2026 23:23:56	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:24:05
10-Sep-2026 23:24:12	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:24:22
10-Sep-2026 23:24:55	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:25:02
10-Sep-2026 23:25:19	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:25:20	2026-09-11 03:25:21 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:25:42
10-Sep-2026 23:26:01	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:26:21
10-Sep-2026 23:26:39	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:26:41
10-Sep-2026 23:26:41	[Mosaic] Test_mosaic_mfs_intonly
10-Sep-2026 23:26:41	PASSED
10-Sep-2026 23:26:41
10-Sep-2026 23:26:50	test_task_sdintimaging.py::test_mosaic::test_mosaic_mfs_sdint
10-Sep-2026 23:26:57	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:27:06
10-Sep-2026 23:27:13	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:27:23
10-Sep-2026 23:27:55	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:28:03
10-Sep-2026 23:28:20	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:28:21	2026-09-11 03:28:21 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:28:21	2026-09-11 03:28:21 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:28:21	2026-09-11 03:28:21 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:28:21	2026-09-11 03:28:21 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:28:21	2026-09-11 03:28:21 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:28:21	2026-09-11 03:28:21 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:28:21	2026-09-11 03:28:22 WARN sdintimaging::task_sdintimaging::casa The cube for the major cycle has only 3 channels. A minimum of nterms = 2 channels is required for an accurate polynomial fit, but where possible at least 5 to 10 channels that span the frequency range are prefered in order to properly encode frequency dependent intensity and weights.
10-Sep-2026 23:28:21	2026-09-11 03:28:22 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:28:22	2026-09-11 03:28:22 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:28:22	2026-09-11 03:28:23 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:28:23	2026-09-11 03:28:23 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:28:24	2026-09-11 03:28:24 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:28:24	2026-09-11 03:28:25 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:28:25	2026-09-11 03:28:25 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:28:47
10-Sep-2026 23:29:05	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:29:07	2026-09-11 03:29:08 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:29:08	2026-09-11 03:29:08 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:29:08	2026-09-11 03:29:09 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:29:28
10-Sep-2026 23:29:47	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:29:49	2026-09-11 03:29:49 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:29:49	2026-09-11 03:29:50 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:29:50	2026-09-11 03:29:50 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:29:51
10-Sep-2026 23:29:51	[Mosaic] Test_mosaic_mfs_sdint
10-Sep-2026 23:29:51	PASSED
10-Sep-2026 23:29:51
10-Sep-2026 23:29:51	test_task_sdintimaging.py::test_mosaic::test_mosaic_mfs_sdonly 2026-09-11 03:29:52 WARN sdintimaging::task_sdintimaging::casa The Single-Dish-Only mode of sdintimaging is better supported via the deconvolve task which supports spectral cube, mfs and multi-term mfs deconvolution in the image domain alone. The deconvolve task is the more appropriate version to use for stand-alone image-domain deconvolution, and will not have the bookkeeping overheads currently present in the sdintimaging task's sd-only mode. Please note that the 'sd' option of the sdintimaging task will be removed in a subsequent release. Please refer to the task deconvolve documentation for instructions on how to prepare image and psf cubes for the deconvolve task for all these modes.
10-Sep-2026 23:30:01
10-Sep-2026 23:30:07	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:30:17
10-Sep-2026 23:30:23	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:30:33
10-Sep-2026 23:31:06	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:31:13
10-Sep-2026 23:31:30	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:31:31	2026-09-11 03:31:31 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:31:31	2026-09-11 03:31:31 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:31:31	2026-09-11 03:31:31 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:31:31	2026-09-11 03:31:31 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:31:31	2026-09-11 03:31:31 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:31:31	2026-09-11 03:31:31 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:31:31	2026-09-11 03:31:32 WARN sdintimaging::task_sdintimaging::casa The cube for the major cycle has only 3 channels. A minimum of nterms = 2 channels is required for an accurate polynomial fit, but where possible at least 5 to 10 channels that span the frequency range are prefered in order to properly encode frequency dependent intensity and weights.
10-Sep-2026 23:31:32	2026-09-11 03:31:33 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:31:58
10-Sep-2026 23:31:58	[Mosaic] Test_mosaic_mfs_sdonly
10-Sep-2026 23:31:58	PASSED
10-Sep-2026 23:31:58
10-Sep-2026 23:31:58	test_task_sdintimaging.py::test_mosaic::test_sdint_full_pol 2026-09-11 03:31:58 WARN sdintimaging::task_sdintimaging::casa You have specified parameter stokes="IQUV" but presently only stokes="I" is supported when usedata="sdint".
10-Sep-2026 23:31:59	2026-09-11 03:31:59 WARN sdintimaging::::casa Image JCMTsubre.image and template image tst.mos_mfs_sdint_singleplane.int.cube.residual have different shape in axis 2 (Stokes): 4 and 1 .
10-Sep-2026 23:31:59	2026-09-11 03:31:59 WARN sdintimaging::::casa Will try to continue by extracting Stokes I from JCMTsubre.image ...
10-Sep-2026 23:31:59	2026-09-11 03:31:59 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:31:59	2026-09-11 03:31:59 WARN sdintimaging::::casa Image JCMTsubre.image and template image tst.mos_mfs_sdint_singleplane.int.cube.residual have different shape in axis 2 (Stokes): 4 and 1 .
10-Sep-2026 23:31:59	2026-09-11 03:31:59 WARN sdintimaging::::casa Will try to continue by extracting Stokes I from JCMTsubre.image ...
10-Sep-2026 23:31:59	2026-09-11 03:31:59 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:31:59	2026-09-11 03:31:59 WARN sdintimaging::::casa The input SD image does not have per-plane-restoring beams. Working around that ...
10-Sep-2026 23:31:59	2026-09-11 03:31:59 WARN componentlist::close componentlist closed
10-Sep-2026 23:31:59	2026-09-11 03:32:00 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:31:59	2026-09-11 03:32:00 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:32:00	2026-09-11 03:32:00 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:32:00	2026-09-11 03:32:01 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:32:01	2026-09-11 03:32:02 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:32:02	2026-09-11 03:32:02 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:32:02	2026-09-11 03:32:03 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:32:03	2026-09-11 03:32:03 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:32:04	2026-09-11 03:32:04 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:32:04	2026-09-11 03:32:05 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:32:04
10-Sep-2026 23:32:04	[singleplane] test_sdint_full_pol
10-Sep-2026 23:32:04	PASSED
10-Sep-2026 23:32:04
10-Sep-2026 23:32:14	test_task_sdintimaging.py::test_mosaic::test_singleplane_sdint_autopsf_multiterm
10-Sep-2026 23:32:18	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:32:27
10-Sep-2026 23:32:31	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:32:41
10-Sep-2026 23:32:47	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:32:54
10-Sep-2026 23:32:59	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:32:59	2026-09-11 03:33:00 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:32:59	2026-09-11 03:33:00 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:32:59	2026-09-11 03:33:00 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:32:59	2026-09-11 03:33:00 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:32:59	2026-09-11 03:33:00 WARN sdintimaging::::casa The input SD image does not have per-plane-restoring beams. Working around that ...
10-Sep-2026 23:32:59	2026-09-11 03:33:00 WARN componentlist::close componentlist closed
10-Sep-2026 23:33:00	2026-09-11 03:33:01 WARN sdintimaging::::casa The specified reffreq for MFS imaging (1500000000.0 Hz) is not exactly the same as the frequency of the selected interferometric data for the major cycle (999889033.7197254 Hz).
10-Sep-2026 23:33:00	2026-09-11 03:33:01 WARN sdintimaging::::casa+ We will ignore this for now.
10-Sep-2026 23:33:01	2026-09-11 03:33:01 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:33:01	2026-09-11 03:33:02 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
10-Sep-2026 23:33:02	2026-09-11 03:33:02 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
10-Sep-2026 23:33:02	2026-09-11 03:33:02 WARN SIImageStore::restore (file /source/casa6/casatools/src/code/synthesis/ImagerObjects/SIImageStore.cc, line 2353) Restoring with an empty model image. Only residuals will be processed to form the output restored image.
10-Sep-2026 23:33:02
10-Sep-2026 23:33:02	[singleplane] test_singleplane_sdint_autopsf_multiterm
10-Sep-2026 23:33:02	PASSED
10-Sep-2026 23:33:02
10-Sep-2026 23:33:02	test_task_sdintimaging.py::test_compare_sdint_tclean::test_intonly_cube_compare_with_tclean 2026-09-11 03:33:03 WARN SynthesisParamsImage::buildCoordinateSystem (file /source/casa6/casatools/src/code/synthesis/ImagerObjects/SynthesisUtilMethods.cc, line 2861) No rest frequency info, using the center of the selected spw(s):1.05e+09 Hz. Velocity labelling may not be correct.
10-Sep-2026 23:33:15
10-Sep-2026 23:33:23	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:33:36
10-Sep-2026 23:33:43	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:33:43	2026-09-11 03:33:44 WARN SynthesisParamsImage::buildCoordinateSystem (file /source/casa6/casatools/src/code/synthesis/ImagerObjects/SynthesisUtilMethods.cc, line 2861) No rest frequency info, using the center of the selected spw(s):1.05e+09 Hz. Velocity labelling may not be correct.
10-Sep-2026 23:33:56
10-Sep-2026 23:34:03	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:34:16
10-Sep-2026 23:34:23	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:34:37
10-Sep-2026 23:34:56	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:34:56	2026-09-11 03:34:57 WARN SynthesisParamsImage::buildCoordinateSystem (file /source/casa6/casatools/src/code/synthesis/ImagerObjects/SynthesisUtilMethods.cc, line 2861) No rest frequency info, using the center of the selected spw(s):1.05e+09 Hz. Velocity labelling may not be correct.
10-Sep-2026 23:35:09
10-Sep-2026 23:35:16	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:35:16	2026-09-11 03:35:17 WARN tclean::::casa Warning! Non-zero values at the edge of the .pb image can cause unexpected aliasing effects! (found value 0.9179047346115112 at index [np.int64(196), np.int64(100), np.int64(0), np.int64(0)])
10-Sep-2026 23:35:29
10-Sep-2026 23:35:37	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:35:50
10-Sep-2026 23:36:09	0%....10....20....30....40....50....60....70....80....90....100%
10-Sep-2026 23:36:09
10-Sep-2026 23:36:09	[Compare] Test_intonly_cube_compare_with_tclean
10-Sep-2026 23:36:09	PASSED
10-Sep-2026 23:36:09
10-Sep-2026 23:36:09	test_task_sdintimaging.py::test_compare_sdint_tclean::test_intonly_mfs_compare_with_tclean 2026-09-11 03:36:10 WARN SynthesisParamsImage::buildCoordinateSystem (file /source/casa6/casatools/src/code/synthesis/ImagerObjects/SynthesisUtilMethods.cc, line 2861) No rest frequency info, using the center of the selected spw(s):1.475e+09 Hz. Velocity labelling may not be correct.
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	[Compare] Test_intonly_mfs_compare_with_tclean
10-Sep-2026 23:36:36	PASSED
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	- generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_task_sdintimaging/nose.xml -
10-Sep-2026 23:36:36	================== 21 passed, 1 warning in 1153.52s (0:19:13) ==================
10-Sep-2026 23:36:36	Namespace(list=False, verbose=False, dry_run=False, classes=None, file=None, mapfile=<_io.TextIOWrapper name='/home/casatest/casa6/casatestutils/casatestutils/component_to_test_map.json' mode='r' encoding='utf-8'>, branch=None, merge_target=None, pkg=None, work_dir=None, ncores=2, test_paths='/home/casatest/casa6/casatasks/tests/tasks,/home/casatest/casa6/casatasks/tests/scripts', test_list=None, test_config=None, test_group='Imaging,tclean', pmode=None, bamboo=False, cachedir=None, ignore_list='test_casampi,test_task_msview,test_task_imview,test_task_plotms', run_skipped=False, only_skipped=False)
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Operating system: Linux
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Testing Components['Imaging', 'tclean']
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Arguments Sent Direct To Pytest : []
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Tests to Ignore: ['test_casampi', 'test_task_msview', 'test_task_imview', 'test_task_plotms']
10-Sep-2026 23:36:36	Running 9 Test(s)
10-Sep-2026 23:36:36	Cleaning: /home/casatest/casa6/casatestutils/nosedir/
10-Sep-2026 23:36:36	Tests: ['/home/casatest/casa6/casatasks/tests/scripts/test_imagerhelpers_gclean.py', '/home/casatest/casa6/casatasks/tests/tasks/test_task_deconvolve.py', '/home/casatest/casa6/casatasks/tests/tasks/test_task_feather.py', '/home/casatest/casa6/casatasks/tests/tasks/test_task_ft.py', '/home/casatest/casa6/casatasks/tests/tasks/test_task_makemask.py', '/home/casatest/casa6/casatasks/tests/tasks/test_task_sdintimaging.py', '/home/casatest/casa6/casatasks/tests/tasks/test_task_setjy.py', '/home/casatest/casa6/casatasks/tests/tasks/test_task_tclean.py', '/home/casatest/casa6/casatasks/tests/tasks/test_task_tsdimaging.py']
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_task_feather/
10-Sep-2026 23:36:36	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_task_feather
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_task_feather/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_task_feather/
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_task_makemask/
10-Sep-2026 23:36:36	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_task_makemask
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_task_makemask/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_task_makemask/
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_task_setjy/
10-Sep-2026 23:36:36	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_task_setjy
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_task_setjy/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_task_setjy/
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_imagerhelpers_gclean/
10-Sep-2026 23:36:36	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_imagerhelpers_gclean
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_imagerhelpers_gclean/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_imagerhelpers_gclean/
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_task_tclean/
10-Sep-2026 23:36:36	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_task_tclean
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_task_tclean/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_task_tclean/
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_task_ft/
10-Sep-2026 23:36:36	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_task_ft
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_task_ft/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_task_ft/
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_task_tsdimaging/
10-Sep-2026 23:36:36	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_task_tsdimaging
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_task_tsdimaging/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_task_tsdimaging/
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_task_deconvolve/
10-Sep-2026 23:36:36	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_task_deconvolve
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_task_deconvolve/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_task_deconvolve/
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_task_sdintimaging/
10-Sep-2026 23:36:36	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_task_sdintimaging
10-Sep-2026 23:36:36
10-Sep-2026 23:36:36	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_task_sdintimaging/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_task_sdintimaging/
10-Sep-2026 23:36:37	total 80184
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci 15001 1934135 Sep 11 01:34 casatasks-6.7.7.7a14858.dev2-py3-none-any.whl
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 543016 Sep 11 03:36 casatasks_test.log
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci 15001 161131 Sep 11 01:33 casatestutils-6.7.7.7a14858.dev2-py3-none-any.whl
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci 15001 79346757 Sep 11 01:34 casatools-6.7.7.7a14858.dev2-cp312-cp312-manylinux_2_28_x86_64.whl
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 906 Sep 11 03:36 requirements.txt
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 1879 Sep 11 03:36 test_imagerhelpers_gclean.xml
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 15735 Sep 11 03:36 test_task_deconvolve.xml
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 1087 Sep 11 03:36 test_task_feather.xml
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 2372 Sep 11 03:36 test_task_ft.xml
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 2663 Sep 11 03:36 test_task_makemask.xml
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 2710 Sep 11 03:36 test_task_sdintimaging.xml
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 3446 Sep 11 03:36 test_task_setjy.xml
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 39307 Sep 11 03:36 test_task_tclean.xml
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 24764 Sep 11 03:36 test_task_tsdimaging.xml
10-Sep-2026 23:36:37	Finished task 'Test wheel' with result: Success
10-Sep-2026 23:36:37	Starting task 'Inject is_641' of type 'com.atlassian.bamboo.plugins.bamboo-variable-inject-plugin:inject'
10-Sep-2026 23:36:37	Injected variable bamboo.inject.is_641=False in LOCAL scope
10-Sep-2026 23:36:37	Finished task 'Inject is_641' with result: Success
10-Sep-2026 23:36:37	Substituting variable: ${bamboo.agentId} with 153550855
10-Sep-2026 23:36:37	Substituting variable: ${bamboo.agentId} with 153550855
10-Sep-2026 23:36:37	Substituting variable: ${bamboo.agentId} with 153550855
10-Sep-2026 23:36:37	Substituting variable: ${bamboo.agentId} with 153550855
10-Sep-2026 23:36:37	Starting task 'Tar work directory' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script'
10-Sep-2026 23:36:37	Beginning to execute external process for build 'CASASPECS - Dev Test 3.12 - CAS-14858 - Test Tasks Many Linux 2.28 Py3.12 #2 (CASASPECS-DEVTESTPY312140-TTM228PY312-2)' ... running command line: /opt/ci_workspace/casa/bamboo/agent7/temp/CASASPECS-DEVTESTPY312140-TTM228PY312-2-ScriptBuildTask-14564832986088616206.sh ... in: /opt/ci_workspace/casa/bamboo/agent7/xml-data/build-dir/CASASPECS-DEVTESTPY312140-TTM228PY312
10-Sep-2026 23:36:37	Package working directory
10-Sep-2026 23:36:37	nosedir/
10-Sep-2026 23:36:37	nosedir/test_task_feather/
10-Sep-2026 23:36:37	nosedir/test_task_feather/test_task_feather.py
10-Sep-2026 23:36:37	nosedir/test_task_feather/conftest.py
10-Sep-2026 23:36:37	nosedir/test_task_feather/casa-20260911-013617.log
10-Sep-2026 23:36:37	nosedir/test_task_feather/short_summary.log
10-Sep-2026 23:36:37	nosedir/xml/
10-Sep-2026 23:36:37	nosedir/xml/test_task_feather/
10-Sep-2026 23:36:37	nosedir/xml/test_task_feather/nose.xml
10-Sep-2026 23:36:37	nosedir/xml/test_task_makemask/
10-Sep-2026 23:36:37	nosedir/xml/test_task_makemask/nose.xml
10-Sep-2026 23:36:37	nosedir/xml/test_task_setjy/
10-Sep-2026 23:36:37	nosedir/xml/test_task_setjy/nose.xml
10-Sep-2026 23:36:37	nosedir/xml/test_imagerhelpers_gclean/
10-Sep-2026 23:36:37	nosedir/xml/test_imagerhelpers_gclean/nose.xml
10-Sep-2026 23:36:37	nosedir/xml/test_task_tclean/
10-Sep-2026 23:36:37	nosedir/xml/test_task_tclean/nose.xml
10-Sep-2026 23:36:37	nosedir/xml/test_task_ft/
10-Sep-2026 23:36:37	nosedir/xml/test_task_ft/nose.xml
10-Sep-2026 23:36:37	nosedir/xml/test_task_tsdimaging/
10-Sep-2026 23:36:37	nosedir/xml/test_task_tsdimaging/nose.xml
10-Sep-2026 23:36:37	nosedir/xml/test_task_deconvolve/
10-Sep-2026 23:36:37	nosedir/xml/test_task_deconvolve/nose.xml
10-Sep-2026 23:36:37	nosedir/xml/test_task_sdintimaging/
10-Sep-2026 23:36:37	nosedir/xml/test_task_sdintimaging/nose.xml
10-Sep-2026 23:36:37	nosedir/test_task_makemask/
10-Sep-2026 23:36:37	nosedir/test_task_makemask/test_task_makemask.py
10-Sep-2026 23:36:37	nosedir/test_task_makemask/conftest.py
10-Sep-2026 23:36:37	nosedir/test_task_makemask/casa-20260911-013620.log
10-Sep-2026 23:36:37	nosedir/test_task_makemask/short_summary.log
10-Sep-2026 23:36:37	nosedir/test_task_makemask/elliptical_annulus_crtf.txt
10-Sep-2026 23:36:37	nosedir/test_task_setjy/
10-Sep-2026 23:36:37	nosedir/test_task_setjy/test_task_setjy.py
10-Sep-2026 23:36:37	nosedir/test_task_setjy/conftest.py
10-Sep-2026 23:36:37	nosedir/test_task_setjy/casa-20260911-013641.log
10-Sep-2026 23:36:37	nosedir/test_task_setjy/short_summary.log
10-Sep-2026 23:36:37	nosedir/test_imagerhelpers_gclean/
10-Sep-2026 23:36:37	nosedir/test_imagerhelpers_gclean/test_imagerhelpers_gclean.py
10-Sep-2026 23:36:37	nosedir/test_imagerhelpers_gclean/conftest.py
10-Sep-2026 23:36:37	nosedir/test_imagerhelpers_gclean/casa-20260911-013735.log
10-Sep-2026 23:36:37	nosedir/test_imagerhelpers_gclean/short_summary.log
10-Sep-2026 23:36:37	nosedir/test_task_tclean/
10-Sep-2026 23:36:37	nosedir/test_task_tclean/test_task_tclean.py
10-Sep-2026 23:36:37	nosedir/test_task_tclean/conftest.py
10-Sep-2026 23:36:37	nosedir/test_task_tclean/casa-20260911-013910.log
10-Sep-2026 23:36:37	nosedir/test_task_tclean/short_summary.log
10-Sep-2026 23:36:37	nosedir/summary_of_failed.log
10-Sep-2026 23:36:37	nosedir/test_task_ft/
10-Sep-2026 23:36:37	nosedir/test_task_ft/test_task_ft.py
10-Sep-2026 23:36:37	nosedir/test_task_ft/conftest.py
10-Sep-2026 23:36:37	nosedir/test_task_ft/casa-20260911-030809.log
10-Sep-2026 23:36:37	nosedir/test_task_ft/short_summary.log
10-Sep-2026 23:36:37	nosedir/test_task_tsdimaging/
10-Sep-2026 23:36:37	nosedir/test_task_tsdimaging/test_task_tsdimaging.py
10-Sep-2026 23:36:37	nosedir/test_task_tsdimaging/conftest.py
10-Sep-2026 23:36:37	nosedir/test_task_tsdimaging/casa-20260911-030816.log
10-Sep-2026 23:36:37	nosedir/test_task_tsdimaging/short_summary.log
10-Sep-2026 23:36:37	nosedir/test_task_deconvolve/
10-Sep-2026 23:36:37	nosedir/test_task_deconvolve/test_task_deconvolve.py
10-Sep-2026 23:36:37	nosedir/test_task_deconvolve/conftest.py
10-Sep-2026 23:36:37	nosedir/test_task_deconvolve/casa-20260911-031037.log
10-Sep-2026 23:36:37	nosedir/test_task_deconvolve/testlog.log
10-Sep-2026 23:36:37	nosedir/test_task_deconvolve/short_summary.log
10-Sep-2026 23:36:37	nosedir/test_task_sdintimaging/
10-Sep-2026 23:36:37	nosedir/test_task_sdintimaging/test_task_sdintimaging.py
10-Sep-2026 23:36:37	nosedir/test_task_sdintimaging/conftest.py
10-Sep-2026 23:36:37	nosedir/test_task_sdintimaging/casa-20260911-031723.log
10-Sep-2026 23:36:37	nosedir/test_task_sdintimaging/short_summary.log
10-Sep-2026 23:36:37	nosedir/requirements.txt
10-Sep-2026 23:36:37	total 81232
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci 15001 1934135 Sep 11 01:34 casatasks-6.7.7.7a14858.dev2-py3-none-any.whl
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 543016 Sep 11 03:36 casatasks_test.log
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci 15001 161131 Sep 11 01:33 casatestutils-6.7.7.7a14858.dev2-py3-none-any.whl
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci 15001 79346757 Sep 11 01:34 casatools-6.7.7.7a14858.dev2-cp312-cp312-manylinux_2_28_x86_64.whl
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 906 Sep 11 03:36 requirements.txt
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 1879 Sep 11 03:36 test_imagerhelpers_gclean.xml
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 15735 Sep 11 03:36 test_task_deconvolve.xml
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 1087 Sep 11 03:36 test_task_feather.xml
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 2372 Sep 11 03:36 test_task_ft.xml
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 2663 Sep 11 03:36 test_task_makemask.xml
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 2710 Sep 11 03:36 test_task_sdintimaging.xml
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 3446 Sep 11 03:36 test_task_setjy.xml
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 39307 Sep 11 03:36 test_task_tclean.xml
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 24764 Sep 11 03:36 test_task_tsdimaging.xml
10-Sep-2026 23:36:37	-rw-r--r-- 1 casaci root 1069081 Sep 11 03:36 work-manylinux_228_casatasks-3.12.tar.gz
10-Sep-2026 23:36:37	Done packaging working directory
10-Sep-2026 23:36:37	Finished task 'Tar work directory' with result: Success
10-Sep-2026 23:36:37	Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit'
10-Sep-2026 23:36:37	Parsing test results under /opt/ci_workspace/casa/bamboo/agent7/xml-data/build-dir/CASASPECS-DEVTESTPY312140-TTM228PY312...
10-Sep-2026 23:36:37	Finished task 'Parse tests' with result: Success
10-Sep-2026 23:36:37	Substituting variable: ${bamboo.agentId} with 153550855
10-Sep-2026 23:36:37	Substituting variable: ${bamboo.repository.branch.name} with CAS-14858
10-Sep-2026 23:36:37	Substituting variable: ${bamboo.planRepository.branchName} with CAS-14858
10-Sep-2026 23:36:37	Substituting variable: ${bamboo.agentId} with 153550855
10-Sep-2026 23:36:37	Substituting variable: ${bamboo.agentId} with 153550855
10-Sep-2026 23:36:37	Substituting variable: ${bamboo.agentId} with 153550855
10-Sep-2026 23:36:37	Substituting variable: ${bamboo.agentId} with 153550855
10-Sep-2026 23:36:37	Substituting variable: ${bamboo.agentId} with 153550855
10-Sep-2026 23:36:37	Starting task 'Upload wheel' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script'
10-Sep-2026 23:36:37	Beginning to execute external process for build 'CASASPECS - Dev Test 3.12 - CAS-14858 - Test Tasks Many Linux 2.28 Py3.12 #2 (CASASPECS-DEVTESTPY312140-TTM228PY312-2)' ... running command line: /opt/ci_workspace/casa/bamboo/agent7/temp/CASASPECS-DEVTESTPY312140-TTM228PY312-2-ScriptBuildTask-4662663183642983592.sh ... in: /opt/ci_workspace/casa/bamboo/agent7/xml-data/build-dir/CASASPECS-DEVTESTPY312140-TTM228PY312
10-Sep-2026 23:36:38	Ticket fix version: CASA 6.ACTIVE
10-Sep-2026 23:36:38	No matching version found
10-Sep-2026 23:36:38	Collecting twine
10-Sep-2026 23:36:38	Downloading twine-7.0.0-py3-none-any.whl (43 kB)
10-Sep-2026 23:36:38	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 43.2/43.2 kB 8.1 MB/s eta 0:00:00
10-Sep-2026 23:36:38	Collecting readme-renderer>=35.0
10-Sep-2026 23:36:38	Downloading readme_renderer-46.0-py3-none-any.whl (14 kB)
10-Sep-2026 23:36:38	Collecting keyring>=21.2.0
10-Sep-2026 23:36:38	Downloading keyring-25.7.0-py3-none-any.whl (39 kB)
10-Sep-2026 23:36:38	Collecting rfc3986>=1.4.0
10-Sep-2026 23:36:38	Downloading rfc3986-2.0.0-py2.py3-none-any.whl (31 kB)
10-Sep-2026 23:36:38	Collecting packaging>=26.1
10-Sep-2026 23:36:38	Downloading packaging-26.3-py3-none-any.whl (129 kB)
10-Sep-2026 23:36:38	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 130.0/130.0 kB 29.8 MB/s eta 0:00:00
10-Sep-2026 23:36:38	Collecting id
10-Sep-2026 23:36:38	Downloading id-1.6.1-py3-none-any.whl (14 kB)
10-Sep-2026 23:36:38	Collecting requests>=2.20
10-Sep-2026 23:36:38	Downloading requests-2.34.2-py3-none-any.whl (73 kB)
10-Sep-2026 23:36:38	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 73.1/73.1 kB 32.9 MB/s eta 0:00:00
10-Sep-2026 23:36:38	Collecting rich>=14.3.3
10-Sep-2026 23:36:38	Downloading rich-15.0.0-py3-none-any.whl (310 kB)
10-Sep-2026 23:36:38	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 310.7/310.7 kB 61.0 MB/s eta 0:00:00
10-Sep-2026 23:36:38	Collecting requests-toolbelt!=0.9.0,>=0.8.0
10-Sep-2026 23:36:38	Downloading requests_toolbelt-1.0.0-py2.py3-none-any.whl (54 kB)
10-Sep-2026 23:36:38	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.5/54.5 kB 28.0 MB/s eta 0:00:00
10-Sep-2026 23:36:38	Collecting urllib3>=1.26.0
10-Sep-2026 23:36:38	Downloading urllib3-2.7.0-py3-none-any.whl (131 kB)
10-Sep-2026 23:36:38	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 131.1/131.1 kB 55.6 MB/s eta 0:00:00
10-Sep-2026 23:36:38	Collecting jaraco.context
10-Sep-2026 23:36:38	Downloading jaraco_context-6.1.2-py3-none-any.whl (7.9 kB)
10-Sep-2026 23:36:38	Collecting importlib_metadata>=4.11.4
10-Sep-2026 23:36:38	Downloading importlib_metadata-9.0.1-py3-none-any.whl (27 kB)
10-Sep-2026 23:36:38	Collecting jeepney>=0.4.2
10-Sep-2026 23:36:38	Downloading jeepney-0.9.0-py3-none-any.whl (49 kB)
10-Sep-2026 23:36:38	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 49.0/49.0 kB 26.9 MB/s eta 0:00:00
10-Sep-2026 23:36:38	Collecting SecretStorage>=3.2
10-Sep-2026 23:36:38	Downloading secretstorage-3.5.0-py3-none-any.whl (15 kB)
10-Sep-2026 23:36:38	Collecting jaraco.classes
10-Sep-2026 23:36:38	Downloading jaraco.classes-3.4.0-py3-none-any.whl (6.8 kB)
10-Sep-2026 23:36:38	Collecting jaraco.functools
10-Sep-2026 23:36:38	Downloading jaraco_functools-4.6.0-py3-none-any.whl (11 kB)
10-Sep-2026 23:36:39	Collecting nh3>=0.2.14
10-Sep-2026 23:36:39	Downloading nh3-0.3.7-cp38-abi3-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (832 kB)
10-Sep-2026 23:36:39	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 832.2/832.2 kB 40.3 MB/s eta 0:00:00
10-Sep-2026 23:36:39	Collecting Pygments>=2.5.1
10-Sep-2026 23:36:39	Downloading pygments-2.21.0-py3-none-any.whl (1.3 MB)
10-Sep-2026 23:36:39	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.3/1.3 MB 116.0 MB/s eta 0:00:00
10-Sep-2026 23:36:39	Collecting docutils>=0.21.2
10-Sep-2026 23:36:39	Downloading docutils-0.23-py3-none-any.whl (634 kB)
10-Sep-2026 23:36:39	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 634.7/634.7 kB 135.5 MB/s eta 0:00:00
10-Sep-2026 23:36:39	Collecting idna<4,>=2.5
10-Sep-2026 23:36:39	Downloading idna-3.19-py3-none-any.whl (68 kB)
10-Sep-2026 23:36:39	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 68.5/68.5 kB 34.9 MB/s eta 0:00:00
10-Sep-2026 23:36:39	Collecting certifi>=2023.5.7
10-Sep-2026 23:36:39	Downloading certifi-2026.7.22-py3-none-any.whl (136 kB)
10-Sep-2026 23:36:39	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 137.0/137.0 kB 59.4 MB/s eta 0:00:00
10-Sep-2026 23:36:39	Collecting charset_normalizer<4,>=2
10-Sep-2026 23:36:39	Downloading charset_normalizer-3.5.1-cp310-cp310-manylinux2014_x86_64.manylinux_2_17_x86_64.manylinux_2_28_x86_64.whl (261 kB)
10-Sep-2026 23:36:39	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 261.6/261.6 kB 59.9 MB/s eta 0:00:00
10-Sep-2026 23:36:39	Collecting markdown-it-py>=2.2.0
10-Sep-2026 23:36:39	Downloading markdown_it_py-4.2.0-py3-none-any.whl (91 kB)
10-Sep-2026 23:36:39	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 91.7/91.7 kB 48.2 MB/s eta 0:00:00
10-Sep-2026 23:36:39	Collecting zipp>=3.20
10-Sep-2026 23:36:39	Downloading zipp-4.1.0-py3-none-any.whl (10 kB)
10-Sep-2026 23:36:39	Collecting mdurl~=0.1
10-Sep-2026 23:36:39	Downloading mdurl-0.1.2-py3-none-any.whl (10.0 kB)
10-Sep-2026 23:36:39	Collecting cryptography>=2.0
10-Sep-2026 23:36:39	Downloading cryptography-50.0.1-cp39-abi3-manylinux_2_28_x86_64.whl (4.8 MB)
10-Sep-2026 23:36:39	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.8/4.8 MB 99.1 MB/s eta 0:00:00
10-Sep-2026 23:36:39	Collecting more-itertools
10-Sep-2026 23:36:40	Downloading more_itertools-11.1.0-py3-none-any.whl (72 kB)
10-Sep-2026 23:36:40	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 72.2/72.2 kB 36.3 MB/s eta 0:00:00
10-Sep-2026 23:36:40	Collecting backports.tarfile
10-Sep-2026 23:36:40	Downloading backports.tarfile-1.2.0-py3-none-any.whl (30 kB)
10-Sep-2026 23:36:40	Collecting typing-extensions>=4.13.2
10-Sep-2026 23:36:40	Downloading typing_extensions-4.16.0-py3-none-any.whl (45 kB)
10-Sep-2026 23:36:40	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 45.6/45.6 kB 24.4 MB/s eta 0:00:00
10-Sep-2026 23:36:40	Collecting cffi>=2.0.0
10-Sep-2026 23:36:40	Downloading cffi-2.1.1-cp310-cp310-manylinux2014_x86_64.manylinux_2_17_x86_64.whl (218 kB)
10-Sep-2026 23:36:40	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 218.7/218.7 kB 81.1 MB/s eta 0:00:00
10-Sep-2026 23:36:40	Collecting pycparser
10-Sep-2026 23:36:40	Downloading pycparser-3.0-py3-none-any.whl (48 kB)
10-Sep-2026 23:36:40	━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 48.2/48.2 kB 23.6 MB/s eta 0:00:00
10-Sep-2026 23:36:40	Installing collected packages: zipp, urllib3, typing-extensions, rfc3986, Pygments, pycparser, packaging, nh3, more-itertools, mdurl, jeepney, idna, docutils, charset_normalizer, certifi, backports.tarfile, requests, readme-renderer, markdown-it-py, jaraco.functools, jaraco.context, jaraco.classes, importlib_metadata, id, cffi, rich, requests-toolbelt, cryptography, SecretStorage, keyring, twine
10-Sep-2026 23:36:42	WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
10-Sep-2026 23:36:42	Successfully installed Pygments-2.21.0 SecretStorage-3.5.0 backports.tarfile-1.2.0 certifi-2026.7.22 cffi-2.1.1 charset_normalizer-3.5.1 cryptography-50.0.1 docutils-0.23 id-1.6.1 idna-3.19 importlib_metadata-9.0.1 jaraco.classes-3.4.0 jaraco.context-6.1.2 jaraco.functools-4.6.0 jeepney-0.9.0 keyring-25.7.0 markdown-it-py-4.2.0 mdurl-0.1.2 more-itertools-11.1.0 nh3-0.3.7 packaging-26.3 pycparser-3.0 readme-renderer-46.0 requests-2.34.2 requests-toolbelt-1.0.0 rfc3986-2.0.0 rich-15.0.0 twine-7.0.0 typing-extensions-4.16.0 urllib3-2.7.0 zipp-4.1.0
10-Sep-2026 23:36:42
10-Sep-2026 23:36:42	[notice] A new release of pip is available: 23.0.1 -> 26.2.1
10-Sep-2026 23:36:42	[notice] To update, run: pip3 install --upgrade pip
10-Sep-2026 23:36:42	Cloning into 'casa-build-utils'...
10-Sep-2026 23:36:59	Uploading distributions to
10-Sep-2026 23:36:59	https://casa-pip.nrao.edu:443/repository/casa-dev-wheel/
10-Sep-2026 23:36:59	Uploading casatasks-6.7.7.7a14858.dev2-py3-none-any.whl
10-Sep-2026 23:36:59
10-Sep-2026 23:36:59	0% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 0.0/1.9 MB • --:-- • ?
10-Sep-2026 23:36:59	100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.9/1.9 MB • 00:00 • 359.4 MB/s
10-Sep-2026 23:36:59	100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.9/1.9 MB • 00:00 • 359.4 MB/s
10-Sep-2026 23:36:59	100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.9/1.9 MB • 00:00 • 359.4 MB/s
10-Sep-2026 23:36:59	100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.9/1.9 MB • 00:00 • 359.4 MB/s
10-Sep-2026 23:36:59	100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.9/1.9 MB • 00:00 • 359.4 MB/s
10-Sep-2026 23:36:59
10-Sep-2026 23:36:59	Finished task 'Upload wheel' with result: Success
10-Sep-2026 23:36:59	Substituting variable: ${bamboo.agentId} with 153550855
10-Sep-2026 23:36:59	Substituting variable: ${bamboo.agentId} with 153550855
10-Sep-2026 23:36:59	Starting task 'Cleanup' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script'
10-Sep-2026 23:36:59	Beginning to execute external process for build 'CASASPECS - Dev Test 3.12 - CAS-14858 - Test Tasks Many Linux 2.28 Py3.12 #2 (CASASPECS-DEVTESTPY312140-TTM228PY312-2)' ... running command line: /opt/ci_workspace/casa/bamboo/agent7/temp/CASASPECS-DEVTESTPY312140-TTM228PY312-2-ScriptBuildTask-13778699472461215290.sh ... in: /opt/ci_workspace/casa/bamboo/agent7/xml-data/build-dir/CASASPECS-DEVTESTPY312140-TTM228PY312
10-Sep-2026 23:36:59	Starting cleanup
10-Sep-2026 23:37:10	wheel-container-test_153550855
10-Sep-2026 23:37:11	wheel-container-test_153550855
10-Sep-2026 23:37:11	Cleanup complete
10-Sep-2026 23:37:11	Finished task 'Cleanup' with result: Success
10-Sep-2026 23:37:11	Running post build plugin 'Docker Container Cleanup'
10-Sep-2026 23:37:11	Beginning to execute external process for build 'CASASPECS - Dev Test 3.12 - CAS-14858 - Test Tasks Many Linux 2.28 Py3.12 #2 (CASASPECS-DEVTESTPY312140-TTM228PY312-2)' ... running command line: /usr/bin/docker rm -f wheel-container-test_153550855 ... in: /opt/ci_workspace/casa/bamboo/agent7/xml-data/build-dir/CASASPECS-DEVTESTPY312140-TTM228PY312
10-Sep-2026 23:37:11	Running post build plugin 'NCover Results Collector'
10-Sep-2026 23:37:11	Running post build plugin 'Build Results Label Collector'
10-Sep-2026 23:37:11	Running post build plugin 'Clover Results Collector'
10-Sep-2026 23:37:11	Running post build plugin 'npm Cache Cleanup'
10-Sep-2026 23:37:11	Running post build plugin 'Artifact Copier'
10-Sep-2026 23:37:11	Publishing an artifact: Workdir
10-Sep-2026 23:37:24	Finished publishing of artifact Non required job artifact Http Compression On : [Workdir], patterns: [work*.tar.gz] anchored at: [wheeldirectory/] in 13.02 s
10-Sep-2026 23:37:24	Publishing an artifact: XML Directories
10-Sep-2026 23:37:30	Finished publishing of artifact Non required job artifact Http Compression On : [XML Directories], patterns: [*/.xml] anchored at: [wheeldirectory/] in 6.019 s
10-Sep-2026 23:37:30	Publishing an artifact: casatasks_test.log
10-Sep-2026 23:37:34	Finished publishing of artifact Non required job artifact Http Compression On : [casatasks_test.log], patterns: [casatasks_test.log] anchored at: [wheeldirectory/] in 4.034 s
10-Sep-2026 23:37:34	Publishing an artifact: requirements.txt
10-Sep-2026 23:37:39	Finished publishing of artifact Non required job artifact Http Compression On : [requirements.txt], patterns: [requirements.txt] anchored at: [wheeldirectory/] in 4.690 s
10-Sep-2026 23:37:39	Finalising the build...
10-Sep-2026 23:37:39	Stopping timer.
10-Sep-2026 23:37:39	Build CASASPECS-DEVTESTPY312140-TTM228PY312-2 completed.
10-Sep-2026 23:37:45	Running on server: post build plugin 'Build Hanging Detection Configuration'
10-Sep-2026 23:37:45	Running on server: post build plugin 'NCover Results Collector'
10-Sep-2026 23:37:45	Running on server: post build plugin 'Build Labeller'
10-Sep-2026 23:37:45	Running on server: post build plugin 'Clover Delta Calculator'
10-Sep-2026 23:37:45	Running on server: post build plugin 'Maven Dependencies Postprocessor'
10-Sep-2026 23:37:45	All post build plugins have finished
10-Sep-2026 23:37:45	Generating build results summary...
10-Sep-2026 23:37:48	Saving build results to disk...
10-Sep-2026 23:37:49	Store variable context...
10-Sep-2026 23:37:49	Finished building CASASPECS-DEVTESTPY312140-TTM228PY312-2.

Build: #2 was successful

Job: Test Tasks Many Linux 2.28 Py3.12 was successful

Stages & jobs

Default Stage

Publish

Create Upload Plan Branch

Build log

Build #2

Build: #2 was successful

Job: Test Tasks Many Linux 2.28 Py3.12 was successful

Stages & jobs

Default Stage

Publish

Create Upload Plan Branch

Build log