Error response from daemon: No such container: wheel_container_test_153550850
Error response from daemon: No such container: wheel_container_test_153550850
2026-10-15 19:16:32        INFO        MS2ASDM::writeConfigDesc()        Filled ConfigDescription table uid://S002/X1/X10 with 1 rows ...
2026-10-15 19:16:32        INFO        MS2ASDM::writeSBSummaryAndExecBlockStubs()        Using tabulated observatory position for ALMA:
2026-10-15 19:16:32        INFO        MS2ASDM::writeSBSummaryAndExecBlockStubs()           Position: [1761.87, -4307.63, -1977.71] (WGS84)
2026-10-15 19:16:32        INFO        MS2ASDM::writeSBSummaryAndExecBlockStubs()        Filled SBSummary table uid://S002/X1/X35 with 36 rows ...
2026-10-15 19:16:32        INFO        MS2ASDM::writeSBSummaryAndExecBlockStubs()        Filled ExecBlock table uid://S002/X1/X36 with 36 rows ...
2026-10-15 19:16:32        INFO        MS2ASDM::writeMainAndScanAndSubScan()        Using column DATA.
2026-10-15 19:16:32        INFO        MS2ASDM::writeMainAndScanAndSubScan()        Filled Main table uid://S002/X1/X5b with 36 rows ...
2026-10-15 19:16:32        INFO        MS2ASDM::writeMainAndScanAndSubScan()        Filled Scan table uid://S002/X1/X5c with 36 rows ...
2026-10-15 19:16:32        INFO        MS2ASDM::writeMainAndScanAndSubScan()        Filled SubScan table uid://S002/X1/X5d with 36 rows ...
2026-10-15 19:16:32        INFO        MS2ASDM::writePointingModel()        Filled PointingModel table uid://S002/X1/X5e with 32 rows ...
2026-10-15 19:16:32        WARN        MS2ASDM::writePointing()        No ENCODER column in MS Pointing table. Will use DIRECTION instead.
2026-10-15 19:16:32        INFO        MS2ASDM::writePointing()        Filled Pointing table uid://S002/X1/X5f with 16 rows ...
2026-10-15 19:16:37        INFO        calibrater::open        ****Using NEW VI2-driven calibrater tool****
2026-10-15 19:16:37        INFO        calibrater::open        Opening MS: uid___A002_X72bc38_X000.ms for calibration.
2026-10-15 19:16:37        INFO                Clearing all model records in MS header.
2026-10-15 19:16:37        INFO        VisSetUtil::addScrCols        Adding MODEL_DATA and CORRECTED_DATA column(s).
2026-10-15 19:16:37        INFO        VisSetUtil::initScrCols        Initializing MODEL_DATA to (unity) and CORRECTED_DATA (to DATA).
2026-10-15 19:16:37        INFO        VisSetUtil::initScrCols        Initialized 101520 rows.
2026-10-15 19:16:37        INFO        Calibrater::        Initializing nominal selection to the whole MS.
2026-10-15 19:17:17        INFO        ms::asdmref        Present ASDM reference path:
2026-10-15 19:17:17        INFO        ms::asdmref+        /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms/uid___A002_X71e4ae_X317_short
2026-10-15 19:17:17        WARN        ms::asdmref        "./moved_uid___A002_X71e4ae_X317_short/" is presently not a valid path ...
2026-10-15 19:17:17        INFO        ms::asdmref        New ASDM reference path:
2026-10-15 19:17:17        INFO        ms::asdmref+        ./moved_uid___A002_X71e4ae_X317_short
2026-10-15 19:18:21        INFO        ms::asdmref        Present ASDM reference path:
2026-10-15 19:18:21        INFO        ms::asdmref+        /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms/uid___A002_X71e4ae_X317_short
2026-10-15 19:18:21        WARN        ms::asdmref        "./moved_uid___A002_X71e4ae_X317_short/" is presently not a valid path ...
2026-10-15 19:18:21        INFO        ms::asdmref        New ASDM reference path:
2026-10-15 19:18:21        INFO        ms::asdmref+        ./moved_uid___A002_X71e4ae_X317_short
2026-10-15 19:18:25        INFO        ms::asdmref        Present ASDM reference path:
2026-10-15 19:18:25        INFO        ms::asdmref+        /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms/uid___A002_X6218fb_X264
2026-10-15 19:18:25        WARN        ms::asdmref        "./moved_uid___A002_X6218fb_X264/" is presently not a valid path ...
2026-10-15 19:18:25        INFO        ms::asdmref        New ASDM reference path:
2026-10-15 19:18:25        INFO        ms::asdmref+        ./moved_uid___A002_X6218fb_X264
2026-10-15 19:18:44        WARN        ImageRegrid::regrid        You are regridding an image whose beam is not well sampled by the pixel size.  Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
2026-10-15 19:18:44        WARN        ImageRegrid::regrid        You are regridding an image whose beam is not well sampled by the pixel size.  Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
2026-10-15 19:18:45        WARN        ImageRegrid::regrid        You are regridding an image whose beam is not well sampled by the pixel size.  Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
2026-10-15 19:18:50        INFO        SubImageFactory::createImage        Creating image 'blahxx.im' of shape [1536, 1536, 1, 2]
2026-10-15 19:18:50        INFO        name::        No table opened.
2026-10-15 19:18:50        INFO        showcache::        The Table Cache is empty.
2026-10-15 19:18:50        INFO        name::        No table opened.
2026-10-15 19:18:50        INFO        showcache::        The Table Cache is empty.
2026-10-15 19:18:50        SEVERE        image::open (file src/tools/image/image_cmpt.cc, line 4208)        Exception Reported: Exception: File name is empty.
2026-10-15 19:18:50        SEVERE        image::open (file src/tools/image/image_cmpt.cc, line 4208)+        ... thrown by static void casa::ImageFactory::_checkInfile(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 371
2026-10-15 19:18:50        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2026-10-15 19:18:50        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-10-15 19:18:50        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2026-10-15 19:18:50        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2026-10-15 19:18:50        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-10-15 19:18:50        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2026-10-15 19:18:50        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2026-10-15 19:18:50        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-10-15 19:18:50        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2026-10-15 19:18:50        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-10-15 19:18:50        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-10-15 19:18:50        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-10-15 19:18:50        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2026-10-15 19:18:50        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-10-15 19:18:50        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2026-10-15 19:18:50        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2026-10-15 19:18:50        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-10-15 19:18:50        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2026-10-15 19:18:50        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-10-15 19:18:50        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-10-15 19:18:50        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-10-15 19:18:50        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2026-10-15 19:18:50        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-10-15 19:18:50        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2026-10-15 19:18:50        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Ambiguous axis specification. Both r and r match image axis name right ascension
2026-10-15 19:18:50        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-10-15 19:18:50        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Ambiguous axis specification. Both r and r match image axis name right ascension
2026-10-15 19:18:50        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-10-15 19:18:50        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-10-15 19:18:50        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-10-15 19:18:50        INFO        name::        No table opened.
2026-10-15 19:18:50        INFO        showcache::        The Table Cache is empty.
2026-10-15 19:18:50        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2026-10-15 19:18:50        INFO        ::::ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2026-10-15 19:18:50        INFO        ::::image::fromshape        Ran ia.fromshape
2026-10-15 19:18:50        INFO        ::::image::fromshape        ia.fromshape(outfile="", shape=[10,10,4,10], csys={...}, linear=false, overwrite=false, log=true, type="f")
2026-10-15 19:18:50        INFO        ::::image::transpose        Ran ia.transpose
2026-10-15 19:18:50        INFO        ::::image::transpose        ia.transpose(outfile="", order="3210")
2026-10-15 19:18:50        INFO        name::        No table opened.
2026-10-15 19:18:50        INFO        showcache::        The Table Cache is empty.
2026-10-15 19:18:50        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 20, 30] with float valued pixels.
2026-10-15 19:18:50        INFO        image::_casaQuantityFromVar         Will use values specified in major, minor, pa to set beam
2026-10-15 19:18:50        INFO        BeamManipulator::set        Setting (global) restoring beam.
2026-10-15 19:18:50        INFO        BeamManipulator::set        Beam parameters:  Major          : 4 arcmin
2026-10-15 19:18:50        INFO        BeamManipulator::set+          Minor          : 3 arcmin
2026-10-15 19:18:50        INFO        BeamManipulator::set+          Position Angle : 0 deg
2026-10-15 19:18:50        INFO        name::        No table opened.
2026-10-15 19:18:50        INFO        showcache::        The Table Cache is empty.
2026-10-15 19:18:50        INFO        SubImageFactory::createImage        Creating image 'straight_copy_0' of shape [5, 6, 7]
2026-10-15 19:18:50        INFO        SubImageFactory::createImage        Creating image 'straight_copy_1' of shape [5, 6, 7]
2026-10-15 19:18:50        INFO        SubImageFactory::createImage        Creating image 'straight_copy_2' of shape [5, 6, 7]
2026-10-15 19:18:50        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2026-10-15 19:18:50        INFO        SubImageFactory::createImage        Creating image 'straight_copy_3' of shape [5, 6, 7]
2026-10-15 19:18:50        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2026-10-15 19:18:50        INFO        name::        No table opened.
2026-10-15 19:18:50        INFO        showcache::        The Table Cache is empty.
2026-10-15 19:18:50        INFO        SubImageFactory::createImage        Creating image 'transpose_0' of shape [6, 7, 5]
2026-10-15 19:18:50        INFO        SubImageFactory::createImage        Creating image 'transpose_1' of shape [6, 7, 5]
2026-10-15 19:18:50        INFO        SubImageFactory::createImage        Creating image 'transpose_2' of shape [6, 7, 5]
2026-10-15 19:18:50        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2026-10-15 19:18:50        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2026-10-15 19:18:50        INFO        SubImageFactory::createImage        Creating image 'transpose_3' of shape [6, 7, 5]
2026-10-15 19:18:50        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2026-10-15 19:18:50        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2026-10-15 19:18:50        INFO        name::        No table opened.
2026-10-15 19:18:50        INFO        showcache::        The Table Cache is empty.
chown: cannot access '/wheeldirectory/work-manylinux_228_casatools-py3.12.tar.gz': No such file or directory