Build: #2 was successful
Job: Test Tools Many Linux 2.28 was successful
Build log
The build generated 53,125 lines of output. The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
| 14-Jan-2025 03:45:47 | 2025-01-14 08:45:48 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 14-Jan-2025 03:45:47 | 2025-01-14 08:45:48 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 14-Jan-2025 03:45:47 | 2025-01-14 08:45:48 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:45:47 | 2025-01-14 08:45:48 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 14-Jan-2025 03:45:47 | 2025-01-14 08:45:48 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:45:47 | 2025-01-14 08:45:48 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:45:50 | 2025-01-14 08:45:50 INFO calibrater::corrupt Finished corrupting. |
| 14-Jan-2025 03:45:50 | 2025-01-14 08:45:50 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:45:50 | test_tool_calibrater.py::calibrater_test::test_activityRecord |
| 14-Jan-2025 03:45:50 | Check that using the calibrater to modify the vis shows in the activity record |
| 14-Jan-2025 03:45:50 | PASSED |
| 14-Jan-2025 03:45:50 | |
| 14-Jan-2025 03:45:50 | 2025-01-14 08:45:50 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:45:50 | 2025-01-14 08:45:50 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:45:50 | 2025-01-14 08:45:51 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:45:50 | 2025-01-14 08:45:51 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:45:51 | 2025-01-14 08:45:52 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:45:52 | 2025-01-14 08:45:52 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:45:52 | 2025-01-14 08:45:52 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:45:52 | 2025-01-14 08:45:52 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 14-Jan-2025 03:45:52 | 2025-01-14 08:45:52 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 14-Jan-2025 03:45:52 | 2025-01-14 08:45:52 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:45:52 | 2025-01-14 08:45:52 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 14-Jan-2025 03:45:52 | 2025-01-14 08:45:52 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:45:52 | 2025-01-14 08:45:52 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:45:54 | 2025-01-14 08:45:55 INFO calibrater::corrupt Finished corrupting. |
| 14-Jan-2025 03:45:56 | 2025-01-14 08:45:57 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:45:56 | test_tool_calibrater.py::calibrater_test::test_corruptCal |
| 14-Jan-2025 03:45:56 | Check that the MS is corrupted using the cal table |
| 14-Jan-2025 03:45:56 | PASSED |
| 14-Jan-2025 03:45:56 | |
| 14-Jan-2025 03:45:56 | 2025-01-14 08:45:57 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:45:56 | 2025-01-14 08:45:57 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:45:56 | 2025-01-14 08:45:57 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:45:56 | 2025-01-14 08:45:57 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:45:58 | 2025-01-14 08:45:58 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:45:58 | 2025-01-14 08:45:59 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:45:58 | 2025-01-14 08:45:59 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:45:58 | 2025-01-14 08:45:59 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:45:58 | test_tool_calibrater.py::calibrater_test::test_createEmpty |
| 14-Jan-2025 03:45:58 | Check that an empty cal table can be created |
| 14-Jan-2025 03:45:58 | PASSED |
| 14-Jan-2025 03:45:58 | |
| 14-Jan-2025 03:45:59 | 2025-01-14 08:45:59 INFO name:: No table opened. |
| 14-Jan-2025 03:45:59 | 2025-01-14 08:45:59 INFO showcache:: The Table Cache is empty. |
| 14-Jan-2025 03:45:59 | 2025-01-14 08:45:59 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:45:59 | 2025-01-14 08:45:59 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:45:59 | 2025-01-14 08:45:59 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:45:59 | 2025-01-14 08:45:59 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:00 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO name:: No table opened. |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO showcache:: The Table Cache has the following 16 entries: |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 14-Jan-2025 03:46:00 | 2025-01-14 08:46:01 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:46:00 | test_tool_calibrater.py::calibrater_test::test_done |
| 14-Jan-2025 03:46:00 | Check that done closes the active calibrator tool |
| 14-Jan-2025 03:46:00 | PASSED |
| 14-Jan-2025 03:46:00 | |
| 14-Jan-2025 03:46:01 | 2025-01-14 08:46:01 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 14-Jan-2025 03:46:01 | 2025-01-14 08:46:01 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 14-Jan-2025 03:46:01 | 2025-01-14 08:46:01 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:46:01 | 2025-01-14 08:46:01 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:46:01 | 2025-01-14 08:46:01 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:46:02 | 2025-01-14 08:46:02 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:46:02 | 2025-01-14 08:46:03 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:46:02 | 2025-01-14 08:46:03 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:46:02 | 2025-01-14 08:46:03 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 14-Jan-2025 03:46:02 | 2025-01-14 08:46:03 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 14-Jan-2025 03:46:03 | 2025-01-14 08:46:03 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:03 | 2025-01-14 08:46:03 INFO calibrater::correct Beginning correct--------------------------- |
| 14-Jan-2025 03:46:03 | 2025-01-14 08:46:03 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:46:03 | 2025-01-14 08:46:03 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:05 | 2025-01-14 08:46:06 INFO calibrater::correct Finished correcting. |
| 14-Jan-2025 03:46:06 | 2025-01-14 08:46:06 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 14-Jan-2025 03:46:06 | 2025-01-14 08:46:06 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:46:06 | 2025-01-14 08:46:06 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:46:06 | 2025-01-14 08:46:06 INFO calibrater::initcalset Beginning initcalset------------------------ |
| 14-Jan-2025 03:46:06 | 2025-01-14 08:46:07 INFO VisSet::VisSet Initializing MODEL_DATA (to unity) and CORRECTED_DATA (to DATA) |
| 14-Jan-2025 03:46:06 | 2025-01-14 08:46:07 INFO VisSet::VisSet Initialized 328860 rows. |
| 14-Jan-2025 03:46:08 | 2025-01-14 08:46:08 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 14-Jan-2025 03:46:08 | test_tool_calibrater.py::calibrater_test::test_reinitModel |
| 14-Jan-2025 03:46:08 | Check that initcalset will reset the CORRECTED_DATA to unity |
| 14-Jan-2025 03:46:08 | PASSED |
| 14-Jan-2025 03:46:08 | |
| 14-Jan-2025 03:46:08 | 2025-01-14 08:46:08 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:46:08 | 2025-01-14 08:46:08 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:46:08 | 2025-01-14 08:46:08 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:46:08 | 2025-01-14 08:46:08 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:46:09 | 2025-01-14 08:46:10 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 INFO Calibrater::setsolve Arranging to SOLVE: |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 INFO Calibrater::setsolve . Mf Mueller: table=gaincaltest2.ms.G0 append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 INFO calibrater::reset Reseting solve/apply state |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 INFO calibrater::solve Beginning solve----------------------------- |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 SEVERE Calibrater::solve Caught exception: Please run setsolve before attempting to solve. |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 INFO Calibrater::solve Reseting entire solve/apply state. |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 SEVERE Exception Reported: Error in Calibrater::solve. |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 INFO calibrater::correct Beginning correct--------------------------- |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 INFO Calibrater::correct2 (VI2/VB2) . (None) |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 SEVERE Calibrater::correct2 (VI2/VB2) Caught exception: Nothing to Apply |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 INFO Calibrater::correct2 (VI2/VB2) Resetting all calibration application settings. |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 SEVERE Exception Reported: Error in Calibrater::correct. |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:10 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:46:10 | test_tool_calibrater.py::calibrater_test::test_resetSolveApply |
| 14-Jan-2025 03:46:10 | Check that the reset function can clear set apply and solves |
| 14-Jan-2025 03:46:10 | PASSED |
| 14-Jan-2025 03:46:10 | |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:11 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:11 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:11 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:46:10 | 2025-01-14 08:46:11 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:46:11 | 2025-01-14 08:46:12 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:46:12 | 2025-01-14 08:46:12 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:46:12 | 2025-01-14 08:46:12 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:46:13 | 2025-01-14 08:46:13 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 14-Jan-2025 03:46:13 | 2025-01-14 08:46:13 INFO calibrater::reset Reseting solve/apply state |
| 14-Jan-2025 03:46:13 | 2025-01-14 08:46:13 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 14-Jan-2025 03:46:13 | 2025-01-14 08:46:13 INFO Calibrater::selectvis+ Selecting on spw: '1' |
| 14-Jan-2025 03:46:13 | 2025-01-14 08:46:13 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
| 14-Jan-2025 03:46:13 | 2025-01-14 08:46:13 INFO Calibrater::selectvis Frequency selection: |
| 14-Jan-2025 03:46:13 | 2025-01-14 08:46:13 INFO Calibrater::selectvis . Spw 1:0~7 (8 channels, step by 1) |
| 14-Jan-2025 03:46:13 | 2025-01-14 08:46:13 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 14-Jan-2025 03:46:13 | 2025-01-14 08:46:13 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:46:13 | test_tool_calibrater.py::calibrater_test::test_returnDict |
| 14-Jan-2025 03:46:13 | Check that the returndict function gives a dictonary with the expected keys |
| 14-Jan-2025 03:46:13 | PASSED |
| 14-Jan-2025 03:46:13 | |
| 14-Jan-2025 03:46:14 | 2025-01-14 08:46:14 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:46:14 | 2025-01-14 08:46:14 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:46:14 | 2025-01-14 08:46:14 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:46:14 | 2025-01-14 08:46:14 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:46:15 | 2025-01-14 08:46:16 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:46:15 | 2025-01-14 08:46:16 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:46:15 | 2025-01-14 08:46:16 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:46:15 | 2025-01-14 08:46:16 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 14-Jan-2025 03:46:15 | 2025-01-14 08:46:16 INFO calibrater::reset Reseting solve/apply state |
| 14-Jan-2025 03:46:15 | 2025-01-14 08:46:16 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 14-Jan-2025 03:46:15 | 2025-01-14 08:46:16 INFO Calibrater::selectvis+ Selecting on antenna/baseline: '0' |
| 14-Jan-2025 03:46:15 | 2025-01-14 08:46:16 INFO Calibrater::selectvis By selection 328860 rows are reduced to 65772 |
| 14-Jan-2025 03:46:15 | 2025-01-14 08:46:16 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 14-Jan-2025 03:46:15 | 2025-01-14 08:46:16 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 14-Jan-2025 03:46:15 | 2025-01-14 08:46:16 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 14-Jan-2025 03:46:15 | 2025-01-14 08:46:16 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 14-Jan-2025 03:46:15 | 2025-01-14 08:46:16 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:15 | 2025-01-14 08:46:16 INFO calibrater::correct Beginning correct--------------------------- |
| 14-Jan-2025 03:46:15 | 2025-01-14 08:46:16 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:46:15 | 2025-01-14 08:46:16 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:17 | 2025-01-14 08:46:18 INFO calibrater::correct Finished correcting. |
| 14-Jan-2025 03:46:18 | 2025-01-14 08:46:18 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:46:18 | test_tool_calibrater.py::calibrater_test::test_selectVisBaseline |
| 14-Jan-2025 03:46:18 | Check that selectvis properly selects baseline/antenna |
| 14-Jan-2025 03:46:18 | 65772 65772 |
| 14-Jan-2025 03:46:18 | 263088 263088 |
| 14-Jan-2025 03:46:18 | PASSED |
| 14-Jan-2025 03:46:18 | |
| 14-Jan-2025 03:46:19 | 2025-01-14 08:46:19 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:46:19 | 2025-01-14 08:46:19 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:46:19 | 2025-01-14 08:46:19 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:46:19 | 2025-01-14 08:46:19 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:46:20 | 2025-01-14 08:46:21 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:46:20 | 2025-01-14 08:46:21 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:46:20 | 2025-01-14 08:46:21 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:46:20 | 2025-01-14 08:46:21 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 14-Jan-2025 03:46:20 | 2025-01-14 08:46:21 INFO calibrater::reset Reseting solve/apply state |
| 14-Jan-2025 03:46:20 | 2025-01-14 08:46:21 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 14-Jan-2025 03:46:20 | 2025-01-14 08:46:21 INFO Calibrater::selectvis+ Selecting on field: '0' |
| 14-Jan-2025 03:46:20 | 2025-01-14 08:46:21 INFO Calibrater::selectvis By selection 328860 rows are reduced to 172260 |
| 14-Jan-2025 03:46:20 | 2025-01-14 08:46:21 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 14-Jan-2025 03:46:20 | 2025-01-14 08:46:21 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 14-Jan-2025 03:46:20 | 2025-01-14 08:46:21 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 14-Jan-2025 03:46:20 | 2025-01-14 08:46:21 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 14-Jan-2025 03:46:21 | 2025-01-14 08:46:21 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:21 | 2025-01-14 08:46:21 INFO calibrater::correct Beginning correct--------------------------- |
| 14-Jan-2025 03:46:21 | 2025-01-14 08:46:21 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:46:21 | 2025-01-14 08:46:21 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:22 | 2025-01-14 08:46:23 INFO calibrater::correct Finished correcting. |
| 14-Jan-2025 03:46:23 | 2025-01-14 08:46:23 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:46:23 | test_tool_calibrater.py::calibrater_test::test_selectVisField |
| 14-Jan-2025 03:46:23 | Check that the field is properly selected by selectvis |
| 14-Jan-2025 03:46:23 | PASSED |
| 14-Jan-2025 03:46:23 | |
| 14-Jan-2025 03:46:24 | 2025-01-14 08:46:24 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:46:24 | 2025-01-14 08:46:24 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:46:24 | 2025-01-14 08:46:24 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:46:24 | 2025-01-14 08:46:24 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:46:25 | 2025-01-14 08:46:26 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:46:25 | 2025-01-14 08:46:26 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:46:25 | 2025-01-14 08:46:26 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:46:25 | 2025-01-14 08:46:26 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 14-Jan-2025 03:46:25 | 2025-01-14 08:46:26 INFO calibrater::reset Reseting solve/apply state |
| 14-Jan-2025 03:46:25 | 2025-01-14 08:46:26 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 14-Jan-2025 03:46:25 | 2025-01-14 08:46:26 INFO Calibrater::selectvis+ Selecting on intent: '*AMPLI*' |
| 14-Jan-2025 03:46:25 | 2025-01-14 08:46:26 INFO Calibrater::selectvis Selection did not drop any rows |
| 14-Jan-2025 03:46:25 | 2025-01-14 08:46:26 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 14-Jan-2025 03:46:25 | 2025-01-14 08:46:26 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 14-Jan-2025 03:46:25 | 2025-01-14 08:46:26 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 14-Jan-2025 03:46:25 | 2025-01-14 08:46:26 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 14-Jan-2025 03:46:26 | 2025-01-14 08:46:26 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:26 | 2025-01-14 08:46:26 INFO calibrater::correct Beginning correct--------------------------- |
| 14-Jan-2025 03:46:26 | 2025-01-14 08:46:26 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:46:26 | 2025-01-14 08:46:26 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:28 | 2025-01-14 08:46:29 INFO calibrater::correct Finished correcting. |
| 14-Jan-2025 03:46:28 | 2025-01-14 08:46:29 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:46:28 | test_tool_calibrater.py::calibrater_test::test_selectVisIntent |
| 14-Jan-2025 03:46:28 | Check that the intent is properly selected by selectvis |
| 14-Jan-2025 03:46:28 | PASSED |
| 14-Jan-2025 03:46:28 | |
| 14-Jan-2025 03:46:29 | 2025-01-14 08:46:30 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:46:29 | 2025-01-14 08:46:30 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:46:29 | 2025-01-14 08:46:30 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:46:29 | 2025-01-14 08:46:30 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:46:30 | 2025-01-14 08:46:31 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:46:31 | 2025-01-14 08:46:31 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:46:31 | 2025-01-14 08:46:31 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:46:31 | 2025-01-14 08:46:31 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 14-Jan-2025 03:46:31 | 2025-01-14 08:46:31 INFO calibrater::reset Reseting solve/apply state |
| 14-Jan-2025 03:46:31 | 2025-01-14 08:46:31 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 14-Jan-2025 03:46:31 | 2025-01-14 08:46:31 INFO Calibrater::selectvis+ Selecting by observation IDs: '0' |
| 14-Jan-2025 03:46:31 | 2025-01-14 08:46:31 INFO Calibrater::selectvis By selection 328860 rows are reduced to 318870 |
| 14-Jan-2025 03:46:31 | 2025-01-14 08:46:31 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 14-Jan-2025 03:46:31 | 2025-01-14 08:46:31 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 14-Jan-2025 03:46:31 | 2025-01-14 08:46:31 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 14-Jan-2025 03:46:31 | 2025-01-14 08:46:31 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 14-Jan-2025 03:46:31 | 2025-01-14 08:46:31 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:31 | 2025-01-14 08:46:31 INFO calibrater::correct Beginning correct--------------------------- |
| 14-Jan-2025 03:46:31 | 2025-01-14 08:46:31 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:46:31 | 2025-01-14 08:46:31 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:34 | 2025-01-14 08:46:34 INFO calibrater::correct Finished correcting. |
| 14-Jan-2025 03:46:34 | 2025-01-14 08:46:34 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:46:34 | test_tool_calibrater.py::calibrater_test::test_selectVisObs |
| 14-Jan-2025 03:46:34 | PASSED |
| 14-Jan-2025 03:46:34 | |
| 14-Jan-2025 03:46:35 | 2025-01-14 08:46:35 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:46:35 | 2025-01-14 08:46:35 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:46:35 | 2025-01-14 08:46:35 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:46:35 | 2025-01-14 08:46:35 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:46:36 | 2025-01-14 08:46:37 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:46:36 | 2025-01-14 08:46:37 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:46:36 | 2025-01-14 08:46:37 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:46:36 | 2025-01-14 08:46:37 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 14-Jan-2025 03:46:36 | 2025-01-14 08:46:37 INFO calibrater::reset Reseting solve/apply state |
| 14-Jan-2025 03:46:36 | 2025-01-14 08:46:37 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 14-Jan-2025 03:46:36 | 2025-01-14 08:46:37 INFO Calibrater::selectvis+ Selecting on scan: '2' |
| 14-Jan-2025 03:46:36 | 2025-01-14 08:46:37 INFO Calibrater::selectvis By selection 328860 rows are reduced to 15660 |
| 14-Jan-2025 03:46:36 | 2025-01-14 08:46:37 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 14-Jan-2025 03:46:36 | 2025-01-14 08:46:37 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 14-Jan-2025 03:46:36 | 2025-01-14 08:46:37 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 14-Jan-2025 03:46:36 | 2025-01-14 08:46:37 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 14-Jan-2025 03:46:36 | 2025-01-14 08:46:37 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:36 | 2025-01-14 08:46:37 INFO calibrater::correct Beginning correct--------------------------- |
| 14-Jan-2025 03:46:36 | 2025-01-14 08:46:37 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:46:36 | 2025-01-14 08:46:37 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:37 | 2025-01-14 08:46:37 INFO calibrater::correct Finished correcting. |
| 14-Jan-2025 03:46:37 | 2025-01-14 08:46:38 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:46:37 | test_tool_calibrater.py::calibrater_test::test_selectVisScan |
| 14-Jan-2025 03:46:37 | Check tht the scan is properly selected by selectvis |
| 14-Jan-2025 03:46:37 | PASSED |
| 14-Jan-2025 03:46:37 | |
| 14-Jan-2025 03:46:38 | 2025-01-14 08:46:39 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:46:38 | 2025-01-14 08:46:39 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:46:38 | 2025-01-14 08:46:39 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:46:38 | 2025-01-14 08:46:39 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:46:40 | 2025-01-14 08:46:40 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:46:40 | 2025-01-14 08:46:40 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:46:40 | 2025-01-14 08:46:40 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:46:40 | 2025-01-14 08:46:40 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 14-Jan-2025 03:46:40 | 2025-01-14 08:46:40 INFO calibrater::reset Reseting solve/apply state |
| 14-Jan-2025 03:46:40 | 2025-01-14 08:46:40 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 14-Jan-2025 03:46:40 | 2025-01-14 08:46:40 INFO Calibrater::selectvis+ Selecting on spw: '0' |
| 14-Jan-2025 03:46:40 | 2025-01-14 08:46:40 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
| 14-Jan-2025 03:46:40 | 2025-01-14 08:46:40 INFO Calibrater::selectvis Frequency selection: |
| 14-Jan-2025 03:46:40 | 2025-01-14 08:46:40 INFO Calibrater::selectvis . Spw 0:0~7 (8 channels, step by 1) |
| 14-Jan-2025 03:46:40 | 2025-01-14 08:46:40 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 14-Jan-2025 03:46:40 | 2025-01-14 08:46:40 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 14-Jan-2025 03:46:40 | 2025-01-14 08:46:40 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 14-Jan-2025 03:46:40 | 2025-01-14 08:46:40 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:40 | 2025-01-14 08:46:40 INFO calibrater::correct Beginning correct--------------------------- |
| 14-Jan-2025 03:46:40 | 2025-01-14 08:46:40 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:46:40 | 2025-01-14 08:46:40 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:41 | 2025-01-14 08:46:41 INFO calibrater::correct Finished correcting. |
| 14-Jan-2025 03:46:41 | 2025-01-14 08:46:42 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:46:41 | test_tool_calibrater.py::calibrater_test::test_selectVisSpw |
| 14-Jan-2025 03:46:41 | Check that spw is properly selected by selectvis |
| 14-Jan-2025 03:46:41 | PASSED |
| 14-Jan-2025 03:46:41 | |
| 14-Jan-2025 03:46:42 | 2025-01-14 08:46:43 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:46:42 | 2025-01-14 08:46:43 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:46:42 | 2025-01-14 08:46:43 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:46:42 | 2025-01-14 08:46:43 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:46:43 | 2025-01-14 08:46:44 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:46:44 | 2025-01-14 08:46:44 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:46:44 | 2025-01-14 08:46:44 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:46:44 | 2025-01-14 08:46:44 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 14-Jan-2025 03:46:44 | 2025-01-14 08:46:44 INFO calibrater::reset Reseting solve/apply state |
| 14-Jan-2025 03:46:44 | 2025-01-14 08:46:44 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 14-Jan-2025 03:46:44 | 2025-01-14 08:46:44 INFO Calibrater::selectvis+ Selecting on time: '>04:38:23' |
| 14-Jan-2025 03:46:44 | 2025-01-14 08:46:44 INFO Calibrater::selectvis By selection 328860 rows are reduced to 313200 |
| 14-Jan-2025 03:46:44 | 2025-01-14 08:46:44 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 14-Jan-2025 03:46:44 | 2025-01-14 08:46:44 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 14-Jan-2025 03:46:44 | 2025-01-14 08:46:44 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 14-Jan-2025 03:46:44 | 2025-01-14 08:46:44 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 14-Jan-2025 03:46:44 | 2025-01-14 08:46:44 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:44 | 2025-01-14 08:46:44 INFO calibrater::correct Beginning correct--------------------------- |
| 14-Jan-2025 03:46:44 | 2025-01-14 08:46:44 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:46:44 | 2025-01-14 08:46:44 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:47 | 2025-01-14 08:46:47 INFO calibrater::correct Finished correcting. |
| 14-Jan-2025 03:46:47 | 2025-01-14 08:46:48 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:46:47 | test_tool_calibrater.py::calibrater_test::test_selectVisTime |
| 14-Jan-2025 03:46:47 | Check that time is properly selected by selectvis |
| 14-Jan-2025 03:46:47 | PASSED |
| 14-Jan-2025 03:46:47 | |
| 14-Jan-2025 03:46:48 | 2025-01-14 08:46:48 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:46:48 | 2025-01-14 08:46:48 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:46:48 | 2025-01-14 08:46:48 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:46:48 | 2025-01-14 08:46:48 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:46:49 | 2025-01-14 08:46:49 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:46:49 | 2025-01-14 08:46:50 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:46:49 | 2025-01-14 08:46:50 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:46:49 | 2025-01-14 08:46:50 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 14-Jan-2025 03:46:49 | 2025-01-14 08:46:50 INFO calibrater::reset Reseting solve/apply state |
| 14-Jan-2025 03:46:49 | 2025-01-14 08:46:50 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 14-Jan-2025 03:46:49 | 2025-01-14 08:46:50 INFO Calibrater::selectvis+ Selecting on uvrange: '> 500000lambda' |
| 14-Jan-2025 03:46:50 | 2025-01-14 08:46:50 INFO Calibrater::selectvis By selection 328860 rows are reduced to 103321 |
| 14-Jan-2025 03:46:50 | 2025-01-14 08:46:50 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 14-Jan-2025 03:46:50 | 2025-01-14 08:46:50 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 14-Jan-2025 03:46:50 | 2025-01-14 08:46:50 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 14-Jan-2025 03:46:50 | 2025-01-14 08:46:50 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 14-Jan-2025 03:46:50 | 2025-01-14 08:46:50 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:50 | 2025-01-14 08:46:50 INFO calibrater::correct Beginning correct--------------------------- |
| 14-Jan-2025 03:46:50 | 2025-01-14 08:46:50 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:46:50 | 2025-01-14 08:46:50 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:46:52 | 2025-01-14 08:46:52 INFO calibrater::correct Finished correcting. |
| 14-Jan-2025 03:46:52 | 2025-01-14 08:46:53 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:46:52 | test_tool_calibrater.py::calibrater_test::test_selectVisUVrange |
| 14-Jan-2025 03:46:52 | Check that selectvis properly selects for uvrange |
| 14-Jan-2025 03:46:52 | PASSED |
| 14-Jan-2025 03:46:52 | |
| 14-Jan-2025 03:46:52 | 2025-01-14 08:46:53 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:46:52 | 2025-01-14 08:46:53 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:46:52 | 2025-01-14 08:46:53 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:46:52 | 2025-01-14 08:46:53 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:46:54 | 2025-01-14 08:46:54 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:46:54 | 2025-01-14 08:46:55 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:46:54 | 2025-01-14 08:46:55 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:46:54 | 2025-01-14 08:46:55 INFO calibrater::parsecallibfile Beginning parsecallibfile-)------- |
| 14-Jan-2025 03:46:54 | 2025-01-14 08:46:55 INFO calibrater::setcallib Beginning setcallib--------- |
| 14-Jan-2025 03:46:54 | 2025-01-14 08:46:55 INFO Calibrater::setcallib2(callib) Arranging to APPLY: |
| 14-Jan-2025 03:46:54 | 2025-01-14 08:46:55 INFO . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 14-Jan-2025 03:46:54 | 2025-01-14 08:46:55 INFO . 0: |
| 14-Jan-2025 03:46:54 | 2025-01-14 08:46:55 INFO + MS: obs= scan= fld= intent= spw= |
| 14-Jan-2025 03:46:54 | 2025-01-14 08:46:55 INFO + CT: tinterp=linear finterp= |
| 14-Jan-2025 03:46:54 | 2025-01-14 08:46:55 INFO + obsmap=[] scanmap=[] fldmap=[] |
| 14-Jan-2025 03:46:54 | 2025-01-14 08:46:55 INFO + spwmap=[] antmap=[] |
| 14-Jan-2025 03:46:54 | 2025-01-14 08:46:55 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 14-Jan-2025 03:46:54 | 2025-01-14 08:46:55 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:46:54 | 2025-01-14 08:46:55 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 14-Jan-2025 03:46:56 | 2025-01-14 08:46:57 INFO calibrater::corrupt Finished corrupting. |
| 14-Jan-2025 03:46:57 | 2025-01-14 08:46:58 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:46:57 | test_tool_calibrater.py::calibrater_test::test_setCalLib |
| 14-Jan-2025 03:46:57 | Check that a provided cal table can be used to corrupt the MODEL_DATA |
| 14-Jan-2025 03:46:57 | PASSED |
| 14-Jan-2025 03:46:57 | |
| 14-Jan-2025 03:46:57 | 2025-01-14 08:46:58 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:46:57 | 2025-01-14 08:46:58 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:46:57 | 2025-01-14 08:46:58 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:46:57 | 2025-01-14 08:46:58 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:46:59 | 2025-01-14 08:46:59 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:46:59 | 2025-01-14 08:46:59 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:46:59 | 2025-01-14 08:46:59 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:46:59 | 2025-01-14 08:46:59 INFO Calibrater::setCorrDepFlags Setting correlation dependent flags = True |
| 14-Jan-2025 03:46:59 | 2025-01-14 08:46:59 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:46:59 | test_tool_calibrater.py::calibrater_test::test_setCorrDepFlags |
| 14-Jan-2025 03:46:59 | Check that corrdepflags will be checked |
| 14-Jan-2025 03:46:59 | PASSED |
| 14-Jan-2025 03:46:59 | |
| 14-Jan-2025 03:46:59 | 2025-01-14 08:47:00 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:46:59 | 2025-01-14 08:47:00 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 14-Jan-2025 03:46:59 | 2025-01-14 08:47:00 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:46:59 | 2025-01-14 08:47:00 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:46:59 | 2025-01-14 08:47:00 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:46:59 | 2025-01-14 08:47:00 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 14-Jan-2025 03:46:59 | 2025-01-14 08:47:00 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:46:59 | 2025-01-14 08:47:00 INFO calibrater::smooth Beginning smooth--(MSSelection version)------- |
| 14-Jan-2025 03:46:59 | 2025-01-14 08:47:00 INFO Calibrater::smooth Beginning smoothing/interpolating method. |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:00 WARN Found pre-v4.1 caltable (/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ngc5921.gcal); attempting to update... |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:00 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:00 INFO Calibrater::smooth Storing result in testcalout.cal |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:00 INFO Writing solutions to table: testcalout.cal |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:00 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:47:00 | test_tool_calibrater.py::calibrater_test::test_smoothedCalTables |
| 14-Jan-2025 03:47:00 | Check that the smooth command creates a smoothed cal table |
| 14-Jan-2025 03:47:00 | PASSED |
| 14-Jan-2025 03:47:00 | |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO calibrater::setsolvebandpoly Beginning setsolvebandpoly--(MSSelection version)------- |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO Calibrater::setsolvebandpoly Arranging to SOLVE: |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO Calibrater::setsolvebandpoly . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO calibrater::solve Beginning solve----------------------------- |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO Calibrater::solve . (None) |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO Calibrater::solve . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO Calibrater::solve Solving for BPOLY |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO For solint = inf, found 7 solution intervals. |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.059507/0.0681762/0.0765806 |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.336529/0.750193/1.6779 |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0630839/0.0689061/0.0756384 |
| 14-Jan-2025 03:47:00 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.279482/0.74979/1.59355 |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0672607/0.089081/0.111106 |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.31075/3.32219/4.29305 |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0652822/0.0889198/0.116912 |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:01 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:02 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.44269/3.26616/4.3519 |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:02 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:02 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:02 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:02 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:02 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:02 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:02 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:02 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:02 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:02 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:02 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:02 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350681/0.587724/0.894558 |
| 14-Jan-2025 03:47:01 | 2025-01-14 08:47:02 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 14-Jan-2025 03:47:03 | 2025-01-14 08:47:03 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.296/59.0077/111.454 |
| 14-Jan-2025 03:47:03 | 2025-01-14 08:47:03 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 14-Jan-2025 03:47:03 | 2025-01-14 08:47:03 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.354236/0.581733/0.988903 |
| 14-Jan-2025 03:47:03 | 2025-01-14 08:47:03 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 17.2419/56.3249/117.264 |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0850169/0.113968/0.15276 |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.67561/5.33243/8.17296 |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0784236/0.114345/0.159908 |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:05 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.46392/5.27232/7.20673 |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0703936/0.102501/0.131676 |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.98728/4.47977/5.84264 |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0751114/0.102994/0.138529 |
| 14-Jan-2025 03:47:05 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 14-Jan-2025 03:47:06 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.18629/4.47068/5.8941 |
| 14-Jan-2025 03:47:06 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 14-Jan-2025 03:47:06 | 2025-01-14 08:47:06 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 14-Jan-2025 03:47:06 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 14-Jan-2025 03:47:06 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 14-Jan-2025 03:47:06 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 14-Jan-2025 03:47:06 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 14-Jan-2025 03:47:06 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 14-Jan-2025 03:47:06 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 14-Jan-2025 03:47:06 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 14-Jan-2025 03:47:06 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 14-Jan-2025 03:47:06 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 14-Jan-2025 03:47:06 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350626/0.604424/0.974388 |
| 14-Jan-2025 03:47:06 | 2025-01-14 08:47:06 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 14-Jan-2025 03:47:07 | 2025-01-14 08:47:08 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.2542/59.3511/120.719 |
| 14-Jan-2025 03:47:07 | 2025-01-14 08:47:08 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 14-Jan-2025 03:47:07 | 2025-01-14 08:47:08 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.382806/0.598119/0.941571 |
| 14-Jan-2025 03:47:07 | 2025-01-14 08:47:08 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:09 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 20.0637/57.2112/118.101 |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:09 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:09 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:09 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:09 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:09 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:09 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:09 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:09 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:09 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:09 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:09 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:09 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0750931/0.0978998/0.125897 |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:09 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:10 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.72932/3.98787/5.33715 |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:10 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:10 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0658572/0.0972125/0.140794 |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:10 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:10 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.97943/3.97841/5.72903 |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:10 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:10 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:10 INFO Calibrater::solve Found good BPOLY solutions in 7 slots. |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:10 INFO calibrater::solve Finished solving. |
| 14-Jan-2025 03:47:09 | 2025-01-14 08:47:10 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 14-Jan-2025 03:47:09 | test_tool_calibrater.py::calibrater_test::test_solveBandpass |
| 14-Jan-2025 03:47:09 | Check that solve band poly creates the output table |
| 14-Jan-2025 03:47:09 | PASSED |
| 14-Jan-2025 03:47:09 | |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO calibrater::setsolvegainspline Beginning setsolvegainspline--(MSSelection version)------- |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO Calibrater::setsolvegainspline Arranging to SOLVE: |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO Calibrater::setsolvegainspline . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO calibrater::solve Beginning solve----------------------------- |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO Calibrater::solve . (None) |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO Calibrater::solve . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO GJonesSpline::solve() Fitting time-dependent cubic splines. |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO GJonesSpline::solve() Solving for phase splines with splinetime= 10800 |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO GJonesSpline::solve() Solving for amplitude splines with splinetime= 10800 |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO GJonesSpline::solve() Accumulating data for: field= 1331+30500002_0, spw= 0, nchan= 63 |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63 |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:10 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63 |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:11 INFO GJonesSpline::solve() Number of timestamps in data = 60 |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:11 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec. |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:11 INFO GJonesSpline::solve() Number of cubic spline control points = 4 |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:11 INFO GJonesSpline::solve() Number of cubic spline knots = 8 |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:11 INFO GJonesSpline::solve() Number of cubic spline segments = 1 |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:11 INFO GJonesSpline::solve() Fitting amplitude spline. |
| 14-Jan-2025 03:47:10 | test_tool_calibrater.py::calibrater_test::test_solveGainspline DPBTRF ;problem leading minor 23 |
| 14-Jan-2025 03:47:10 | DPBTRF ;problem leading minor 23 |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:11 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline. |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:11 INFO GJonesSpline::solve() Fitting phase spline. |
| 14-Jan-2025 03:47:10 | DPBTRF ;problem leading minor 22 |
| 14-Jan-2025 03:47:10 | DPBTRF ;problem leading minor 22 |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:11 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:11 INFO calibrater::solve Finished solving. |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:11 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 14-Jan-2025 03:47:10 | |
| 14-Jan-2025 03:47:10 | Check that solve gain spline creates the output table |
| 14-Jan-2025 03:47:10 | PASSED |
| 14-Jan-2025 03:47:10 | |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:11 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:11 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:11 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:47:10 | 2025-01-14 08:47:11 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:47:12 | 2025-01-14 08:47:12 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:47:12 | 2025-01-14 08:47:13 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:47:12 | 2025-01-14 08:47:13 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:47:12 | 2025-01-14 08:47:13 INFO calibrater::specifycal Beginning specifycal----------------------- |
| 14-Jan-2025 03:47:12 | 2025-01-14 08:47:13 INFO Creating G Jones table from specified parameters. |
| 14-Jan-2025 03:47:12 | 2025-01-14 08:47:13 INFO Generating 'G' corrections. |
| 14-Jan-2025 03:47:12 | 2025-01-14 08:47:13 INFO Specified parameter(s) (per spw and pol) repeated on all antennas. |
| 14-Jan-2025 03:47:12 | 2025-01-14 08:47:13 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations. |
| 14-Jan-2025 03:47:12 | 2025-01-14 08:47:13 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9]) |
| 14-Jan-2025 03:47:12 | 2025-01-14 08:47:13 INFO Writing solutions to table: testcalout.cal |
| 14-Jan-2025 03:47:12 | 2025-01-14 08:47:13 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:47:12 | test_tool_calibrater.py::calibrater_test::test_specifyCal |
| 14-Jan-2025 03:47:12 | Check that specifycal can set values for specific spws and antennas |
| 14-Jan-2025 03:47:12 | PASSED |
| 14-Jan-2025 03:47:12 | |
| 14-Jan-2025 03:47:12 | 2025-01-14 08:47:13 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 14-Jan-2025 03:47:12 | 2025-01-14 08:47:13 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 14-Jan-2025 03:47:12 | 2025-01-14 08:47:13 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:47:12 | 2025-01-14 08:47:13 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:47:12 | 2025-01-14 08:47:13 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:14 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO Calibrater::setsolve Arranging to SOLVE: |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO Calibrater::state The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO Calibrater::state The following calibration term is arranged for solve: |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO calibrater::solve Beginning solve----------------------------- |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 14-Jan-2025 03:47:14 | 2025-01-14 08:47:15 INFO Solving for Mf Mueller |
| 14-Jan-2025 03:47:15 | 2025-01-14 08:47:15 INFO For solint = inf, found 84 solution intervals. |
| 14-Jan-2025 03:47:16 | 2025-01-14 08:47:16 INFO Found good Mf Mueller solutions in 84 intervals. |
| 14-Jan-2025 03:47:16 | 2025-01-14 08:47:16 INFO Writing solutions to table: output.ms |
| 14-Jan-2025 03:47:16 | 2025-01-14 08:47:17 INFO calibrater::solve Finished solving. |
| 14-Jan-2025 03:47:16 | 2025-01-14 08:47:17 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 14-Jan-2025 03:47:16 | test_tool_calibrater.py::calibrater_test::test_standardPath |
| 14-Jan-2025 03:47:16 | open setapply setsolve state solve close |
| 14-Jan-2025 03:47:16 | PASSED |
| 14-Jan-2025 03:47:16 | |
| 14-Jan-2025 03:47:16 | 2025-01-14 08:47:17 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:47:16 | 2025-01-14 08:47:17 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:47:16 | 2025-01-14 08:47:17 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:47:16 | 2025-01-14 08:47:17 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO name:: No table opened. |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: The Table Cache has the following 16 entries: |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO name:: No table opened. |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 INFO showcache:: The Table Cache is empty. |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:18 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:47:18 | test_tool_calibrater.py::calibrater_test::test_takesMs |
| 14-Jan-2025 03:47:18 | Check that the calibrater tool can open and close an MS |
| 14-Jan-2025 03:47:18 | PASSED |
| 14-Jan-2025 03:47:18 | |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:19 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:19 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:19 INFO Clearing all model records in MS header. |
| 14-Jan-2025 03:47:18 | 2025-01-14 08:47:19 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jan-2025 03:47:20 | 2025-01-14 08:47:20 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jan-2025 03:47:20 | 2025-01-14 08:47:20 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jan-2025 03:47:20 | 2025-01-14 08:47:20 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jan-2025 03:47:20 | 2025-01-14 08:47:20 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 14-Jan-2025 03:47:20 | 2025-01-14 08:47:20 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 14-Jan-2025 03:47:20 | 2025-01-14 08:47:21 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:47:20 | 2025-01-14 08:47:21 INFO calibrater::correct Beginning correct--------------------------- |
| 14-Jan-2025 03:47:20 | 2025-01-14 08:47:21 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 14-Jan-2025 03:47:20 | 2025-01-14 08:47:21 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jan-2025 03:47:23 | 2025-01-14 08:47:23 INFO calibrater::correct Finished correcting. |
| 14-Jan-2025 03:47:23 | 2025-01-14 08:47:23 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jan-2025 03:47:23 | test_tool_calibrater.py::calibrater_test::test_writeToCorrected |
| 14-Jan-2025 03:47:23 | Check that the tool writes to the CORRECTED_DATA column |
| 14-Jan-2025 03:47:23 | PASSED |
| 14-Jan-2025 03:47:23 | |
| 14-Jan-2025 03:47:23 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml - |
| 14-Jan-2025 03:47:23 | =================== 24 passed, 1 warning in 99.45s (0:01:39) =================== |
| 14-Jan-2025 03:47:23 | ============================= test session starts ============================== |
| 14-Jan-2025 03:47:23 | platform linux -- Python 3.8.7, pytest-8.3.4, pluggy-1.5.0 -- /home/casatest/venv/bin/python3.8 |
| 14-Jan-2025 03:47:23 | cachedir: .pytest_cache |
| 14-Jan-2025 03:47:23 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics |
| 14-Jan-2025 03:47:23 | configfile: pytest.ini |
| 14-Jan-2025 03:47:24 | collecting ... collected 11 items |
| 14-Jan-2025 03:47:24 | |
| 14-Jan-2025 03:47:24 | |
| 14-Jan-2025 03:47:24 | 2025-01-14 08:47:24 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 14-Jan-2025 03:47:24 | 2025-01-14 08:47:24 INFO name:: No table opened. |
| 14-Jan-2025 03:47:24 | 2025-01-14 08:47:24 INFO showcache:: The Table Cache is empty. |
| 14-Jan-2025 03:47:24 | test_tool_image_statistics.py::ia_statistics_test::test_CAS_2195_image_can_have_linear_rather_than_direction_coordinate |
| 14-Jan-2025 03:47:24 | verify fix for CAS-2195, image has linear, not direction, coordinate |
| 14-Jan-2025 03:47:24 | PASSED |
| 14-Jan-2025 03:47:24 | |
| 14-Jan-2025 03:47:31 | ....10....20....30....40....50....60....70....80....90....100% |
| 14-Jan-2025 03:47:39 | 2025-01-14 08:47:40 INFO name:: No table opened. |
| 14-Jan-2025 03:47:39 | 2025-01-14 08:47:40 INFO showcache:: The Table Cache is empty. |
| 14-Jan-2025 03:47:39 | test_tool_image_statistics.py::ia_statistics_test::test_biweight |
| 14-Jan-2025 03:47:39 | Test biweight algorithm CAS-11100 |
| 14-Jan-2025 03:47:39 | PASSED |
| 14-Jan-2025 03:47:39 | |
| 14-Jan-2025 03:47:39 | 2025-01-14 08:47:40 INFO ImageFactory::createImage Created Paged image 'chauvtest.im' of shape [107] with float valued pixels. |
| 14-Jan-2025 03:47:39 | 2025-01-14 08:47:40 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 14-Jan-2025 03:47:39 | 2025-01-14 08:47:40 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 14-Jan-2025 03:47:39 | 2025-01-14 08:47:40 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 14-Jan-2025 03:47:39 | 2025-01-14 08:47:40 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 14-Jan-2025 03:47:39 | 2025-01-14 08:47:40 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 14-Jan-2025 03:47:39 | 2025-01-14 08:47:40 INFO name:: No table opened. |
| 14-Jan-2025 03:47:39 | 2025-01-14 08:47:40 INFO showcache:: The Table Cache is empty. |
| 14-Jan-2025 03:47:39 | test_tool_image_statistics.py::ia_statistics_test::test_chauvenet |
| 14-Jan-2025 03:47:39 | Test Chauvenet's criterion algorithm |
| 14-Jan-2025 03:47:39 | PASSED |
| 14-Jan-2025 03:47:39 | |
| 14-Jan-2025 03:47:39 | 2025-01-14 08:47:40 INFO ImageFactory::createImage Created Paged image 'fhtest.im' of shape [100] with float valued pixels. |
| 14-Jan-2025 03:47:39 | 2025-01-14 08:47:40 INFO name:: No table opened. |
| 14-Jan-2025 03:47:39 | 2025-01-14 08:47:40 INFO showcache:: The Table Cache is empty. |
| 14-Jan-2025 03:47:39 | test_tool_image_statistics.py::ia_statistics_test::test_fithalf |
| 14-Jan-2025 03:47:39 | Test fit to half algorithm |
| 14-Jan-2025 03:47:39 | PASSED |
| 14-Jan-2025 03:47:39 | |
| 14-Jan-2025 03:47:39 | 2025-01-14 08:47:40 INFO ImageFactory::createImage Created Paged image 'hftest.im' of shape [100] with float valued pixels. |
| 14-Jan-2025 03:47:39 | 2025-01-14 08:47:40 INFO name:: No table opened. |
| 14-Jan-2025 03:47:39 | 2025-01-14 08:47:40 INFO showcache:: The Table Cache is empty. |
| 14-Jan-2025 03:47:39 | test_tool_image_statistics.py::ia_statistics_test::test_hingesfences |
| 14-Jan-2025 03:47:39 | Test hinges-fences algorithm |
| 14-Jan-2025 03:47:39 | PASSED |
| 14-Jan-2025 03:47:39 | |
| 14-Jan-2025 03:47:39 | 2025-01-14 08:47:40 INFO ImageFactory::createImage Created Paged image 'internally_excluded_region.im' of shape [100, 200, 110, 4] with float valued pixels. |
| 14-Jan-2025 03:47:40 | 2025-01-14 08:47:41 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 14-Jan-2025 03:47:40 | 2025-01-14 08:47:41 INFO CasacRegionManager::fromBCS Using channel range(s) |
| 14-Jan-2025 03:47:40 | 2025-01-14 08:47:41 INFO CasacRegionManager::fromBCS Using polarizations IV |
| 14-Jan-2025 03:47:40 | 2025-01-14 08:47:41 WARN Stokes cannot be determined because this region type is not handled yet. But chances are very good this is no need to be alarmed. |
| 14-Jan-2025 03:47:40 | 2025-01-14 08:47:41 INFO name:: No table opened. |
| 14-Jan-2025 03:47:40 | 2025-01-14 08:47:41 INFO showcache:: The Table Cache is empty. |
| 14-Jan-2025 03:47:40 | test_tool_image_statistics.py::ia_statistics_test::test_internal_region_exclusion |
| 14-Jan-2025 03:47:40 | Verify data not returned for internally excluded regions |
| 14-Jan-2025 03:47:40 | PASSED |
| 14-Jan-2025 03:47:40 | |
| 14-Jan-2025 03:47:40 | 2025-01-14 08:47:41 INFO name:: No table opened. |
| 14-Jan-2025 03:47:40 | 2025-01-14 08:47:41 INFO showcache:: The Table Cache is empty. |
| 14-Jan-2025 03:47:40 | test_tool_image_statistics.py::ia_statistics_test::test_logfile_param |
| 14-Jan-2025 03:47:40 | test logfile |
| 14-Jan-2025 03:47:40 | i 1 |
| 14-Jan-2025 03:47:40 | i 2 |
| 14-Jan-2025 03:47:40 | PASSED |
| 14-Jan-2025 03:47:40 | |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Image name : moment_map.im |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Object name : G11.92 |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Image type : PagedImage |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Image quantity : Intensity |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Pixel mask(s) : mask0 |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Region(s) : None |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Image units : Jy/beam.km/s |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Restoring Beam : 3.15627 arcsec, 1.80243 arcsec, 58.3141 deg |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Direction reference : J2000 |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Spectral reference : LSRK |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Velocity type : RADIO |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Rest frequency : 2.30538e+11 Hz |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Pointing center : 18:13:58.097081 -18.54.16.695951 |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Telescope : SMA |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Observer : SMA |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Date observation : 2008/06/23/00:00:00.000000 |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Axis Coord Type Name Proj Shape Tile Coord value at pixel Coord incr Units |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ -------------------------------------------------------------------------------------------------- |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ 0 0 Direction Right Ascension SIN 256 256 18:13:58.097 128.00 -4.000000e-01 arcsec |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ 1 0 Direction Declination SIN 256 256 -18.54.16.696 128.00 4.000000e-01 arcsec |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ 2 1 Stokes Stokes 1 1 I |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ 3 2 Spectral Frequency 1 1 2.30392e+11 -37.00 2.536257562e+06 Hz |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageMetaData::summary+ Velocity 189.963 -37.00 -3.298159e+00 km/s |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO name:: No table opened. |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO showcache:: The Table Cache is empty. |
| 14-Jan-2025 03:47:41 | test_tool_image_statistics.py::ia_statistics_test::test_moment_map_flux |
| 14-Jan-2025 03:47:41 | Test 1: verify moment maps can have flux densities computed in statistics |
| 14-Jan-2025 03:47:41 | PASSED |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageFactory::createImage Created Paged image 'test011.im' of shape [10, 10, 10] with float valued pixels. |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO CasacRegionManager::fromBCS Using specified box(es) 0, 0, 2, 2, 4, 4, 6, 6 |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO name:: No table opened. |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO showcache:: The Table Cache is empty. |
| 14-Jan-2025 03:47:41 | test_tool_image_statistics.py::ia_statistics_test::test_multiple_region_support |
| 14-Jan-2025 03:47:41 | test multiple region support |
| 14-Jan-2025 03:47:41 | PASSED |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO name:: No table opened. |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO showcache:: The Table Cache is empty. |
| 14-Jan-2025 03:47:41 | test_tool_image_statistics.py::ia_statistics_test::test_specifying_axes_param |
| 14-Jan-2025 03:47:41 | choose axes works |
| 14-Jan-2025 03:47:41 | PASSED |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageFactory::createImage Created Paged image 'maskim' of shape [200, 200, 1, 1] with float valued pixels. |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO ImageFactory::createImage Created Paged image 'tmp.im' of shape [200, 200, 1, 20] with float valued pixels. |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 SEVERE image::statistics (file src/tools/image/image_cmpt.cc, line 5995) Exception Reported: The input image shape ([200, 200, 1, 20]) and mask shape ([200, 200, 1, 1]) are different, and it was specified that the mask should not be extended, so the mask cannot be applied to the (sub)image. Specifying that the mask should be extended may resolve the issue at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 306 |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO name:: No table opened. |
| 14-Jan-2025 03:47:41 | 2025-01-14 08:47:41 INFO showcache:: The Table Cache is empty. |
| 14-Jan-2025 03:47:41 | test_tool_image_statistics.py::ia_statistics_test::test_stretch |
| 14-Jan-2025 03:47:41 | Test stretch parameter |
| 14-Jan-2025 03:47:41 | PASSED |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_statistics/nose.xml - |
| 14-Jan-2025 03:47:41 | ======================== 11 passed, 1 warning in 17.61s ======================== |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_agentflagger/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_measures/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_measures |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_measures/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_measures/ |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pv/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msmetadata/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_regrid/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_regionmanager/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_regionmanager |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_regionmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_regionmanager/ |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_fitprofile/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image/ |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms/ |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_sdm/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_componentlist/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_synthesisutils/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils/ |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_statwt/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_coordsys/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys/ |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msuvbinner/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pbcor/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics/ |
| 14-Jan-2025 03:47:41 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics |
| 14-Jan-2025 03:47:41 | |
| 14-Jan-2025 03:47:41 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_statistics/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics/ |
| 14-Jan-2025 03:47:42 | total 177328 |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci 15001 135224 Jan 14 08:33 casatestutils-6.7.0.19a100.dev0+dirty-py3-none-any.whl |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci 15001 181274196 Jan 14 08:33 casatools-6.7.0.19a100.dev0+dirty-cp38-cp38-manylinux_2_28_x86_64.whl |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 4320 Jan 14 08:47 test_tool_agentflagger.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 986 Jan 14 08:47 test_tool_calanalysis.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 2636 Jan 14 08:47 test_tool_calibrater.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 667 Jan 14 08:47 test_tool_componentlist.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 7447 Jan 14 08:47 test_tool_coordsys.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 12915 Jan 14 08:47 test_tool_image.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 2200 Jan 14 08:47 test_tool_image_collapse.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 1028 Jan 14 08:47 test_tool_image_deviation.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 2555 Jan 14 08:47 test_tool_image_fitprofile.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 1158 Jan 14 08:47 test_tool_image_pbcor.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 863 Jan 14 08:47 test_tool_image_pv.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 986 Jan 14 08:47 test_tool_image_rebin.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 1316 Jan 14 08:47 test_tool_image_regrid.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 1513 Jan 14 08:47 test_tool_image_statistics.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 745 Jan 14 08:47 test_tool_image_subimage.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 870 Jan 14 08:47 test_tool_image_transpose.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 1946 Jan 14 08:47 test_tool_imagepol.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 819 Jan 14 08:47 test_tool_linearmosaic.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 648 Jan 14 08:47 test_tool_logsink.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 529 Jan 14 08:47 test_tool_measures.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 5204 Jan 14 08:47 test_tool_ms.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 347 Jan 14 08:47 test_tool_ms_createmultims.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 2075 Jan 14 08:47 test_tool_ms_statwt.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 8613 Jan 14 08:47 test_tool_msmetadata.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 339 Jan 14 08:47 test_tool_msuvbinner.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 1151 Jan 14 08:47 test_tool_quanta.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 3957 Jan 14 08:47 test_tool_regionmanager.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 2052 Jan 14 08:47 test_tool_sdm.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 2076 Jan 14 08:47 test_tool_sdm_toms.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 428 Jan 14 08:47 test_tool_simulator.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 1697 Jan 14 08:47 test_tool_synthesisutils.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 1442 Jan 14 08:47 test_tool_table.xml |
| 14-Jan-2025 03:47:42 | -rw-r--r-- 1 casaci root 1697 Jan 14 08:47 test_tool_vpmanager.xml |
| 14-Jan-2025 03:47:42 | Finished task 'Test wheel' with result: Success |
| 14-Jan-2025 03:47:42 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
| 14-Jan-2025 03:47:42 | Parsing test results under /export/home/cbt-el7-7/bamboohome/xml-data/build-dir/CASASPECS-CI44-TTOML228... |
| 14-Jan-2025 03:47:42 | Finished task 'Parse tests' with result: Success |
| 14-Jan-2025 03:47:42 | Starting task 'Cleanup' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
| 14-Jan-2025 03:47:42 | Beginning to execute external process for build 'CASASPECS - CI Build - CAS-14503 - Test Tools Many Linux 2.28 #2 (CASASPECS-CI44-TTOML228-2)' ... running command line: /export/home/cbt-el7-7/bamboohome/temp/CASASPECS-CI44-TTOML228-2-ScriptBuildTask-9171605409354262418.sh ... in: /export/home/cbt-el7-7/bamboohome/xml-data/build-dir/CASASPECS-CI44-TTOML228 |
| 14-Jan-2025 03:47:42 | Starting cleanup |
| 14-Jan-2025 03:47:53 | wheel-container-test |
| 14-Jan-2025 03:47:55 | wheel-container-test |
| 14-Jan-2025 03:47:55 | Cleanup complete |
| 14-Jan-2025 03:47:55 | Finished task 'Cleanup' with result: Success |
| 14-Jan-2025 03:47:55 | Running post build plugin 'Docker Container Cleanup' |
| 14-Jan-2025 03:47:55 | Beginning to execute external process for build 'CASASPECS - CI Build - CAS-14503 - Test Tools Many Linux 2.28 #2 (CASASPECS-CI44-TTOML228-2)' ... running command line: /bin/docker rm -f wheel-container-test ... in: /export/home/cbt-el7-7/bamboohome/xml-data/build-dir/CASASPECS-CI44-TTOML228 |
| 14-Jan-2025 03:47:55 | Error response from daemon: No such container: wheel-container-test |
| 14-Jan-2025 03:47:55 | Running post build plugin 'NCover Results Collector' |
| 14-Jan-2025 03:47:55 | Running post build plugin 'Build Results Label Collector' |
| 14-Jan-2025 03:47:55 | Running post build plugin 'Clover Results Collector' |
| 14-Jan-2025 03:47:55 | Running post build plugin 'npm Cache Cleanup' |
| 14-Jan-2025 03:47:55 | Running post build plugin 'Artifact Copier' |
| 14-Jan-2025 03:47:55 | Publishing an artifact: Tests |
| 14-Jan-2025 03:47:55 | Finished publishing of artifact Non required job artifact Http Compression On : [Tests], patterns: [*.xml] anchored at: [wheeldirectory/] in 286.7 ms |
| 14-Jan-2025 03:47:55 | Publishing an artifact: xml Directories |
| 14-Jan-2025 03:47:55 | Finished publishing of artifact Non required job artifact Http Compression On : [xml Directories], patterns: [**/*.xml] anchored at: [wheeldirectory/] in 259.4 ms |
| 14-Jan-2025 03:47:55 | Finalising the build... |
| 14-Jan-2025 03:47:55 | Stopping timer. |
| 14-Jan-2025 03:47:55 | Build CASASPECS-CI44-TTOML228-2 completed. |
| 14-Jan-2025 03:47:56 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
| 14-Jan-2025 03:47:56 | Running on server: post build plugin 'NCover Results Collector' |
| 14-Jan-2025 03:47:56 | Running on server: post build plugin 'Build Labeller' |
| 14-Jan-2025 03:47:56 | Running on server: post build plugin 'Clover Delta Calculator' |
| 14-Jan-2025 03:47:56 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
| 14-Jan-2025 03:47:56 | All post build plugins have finished |
| 14-Jan-2025 03:47:56 | Generating build results summary... |
| 14-Jan-2025 03:47:56 | Saving build results to disk... |
| 14-Jan-2025 03:47:56 | Store variable context... |
| 14-Jan-2025 03:47:56 | Finished building CASASPECS-CI44-TTOML228-2. |