Build: #34 was successful
Job: Test Tools Many Linux 2.28 was successful
Build log
The build generated 53,231 lines of output. The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
| 14-Jul-2026 14:33:06 | PASSED |
| 14-Jul-2026 14:33:06 | |
| 14-Jul-2026 14:33:07 | 2026-07-14 18:33:07 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 14-Jul-2026 14:33:07 | 2026-07-14 18:33:07 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 14-Jul-2026 14:33:07 | 2026-07-14 18:33:07 INFO Clearing all model records in MS header. |
| 14-Jul-2026 14:33:07 | 2026-07-14 18:33:07 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 14-Jul-2026 14:33:08 | 2026-07-14 18:33:08 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 14-Jul-2026 14:33:08 | 2026-07-14 18:33:09 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 14-Jul-2026 14:33:08 | 2026-07-14 18:33:09 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 14-Jul-2026 14:33:08 | 2026-07-14 18:33:09 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 14-Jul-2026 14:33:08 | 2026-07-14 18:33:09 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 14-Jul-2026 14:33:08 | 2026-07-14 18:33:09 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jul-2026 14:33:08 | 2026-07-14 18:33:09 INFO calibrater::correct Beginning correct--------------------------- |
| 14-Jul-2026 14:33:08 | 2026-07-14 18:33:09 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 14-Jul-2026 14:33:08 | 2026-07-14 18:33:09 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 14-Jul-2026 14:33:11 | 2026-07-14 18:33:12 INFO calibrater::correct Finished correcting. |
| 14-Jul-2026 14:33:11 | 2026-07-14 18:33:12 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 14-Jul-2026 14:33:11 | test_tool_calibrater.py::calibrater_test::test_writeToCorrected |
| 14-Jul-2026 14:33:11 | Check that the tool writes to the CORRECTED_DATA column |
| 14-Jul-2026 14:33:11 | PASSED |
| 14-Jul-2026 14:33:11 | |
| 14-Jul-2026 14:33:11 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml - |
| 14-Jul-2026 14:33:11 | ================== 24 passed, 1 warning in 100.10s (0:01:40) =================== |
| 14-Jul-2026 14:33:11 | ============================= test session starts ============================== |
| 14-Jul-2026 14:33:11 | platform linux -- Python 3.12.9, pytest-9.1.1, pluggy-1.6.0 -- /home/casatest/venv/bin/python3.12 |
| 14-Jul-2026 14:33:11 | cachedir: .pytest_cache |
| 14-Jul-2026 14:33:11 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_subimage |
| 14-Jul-2026 14:33:11 | configfile: pytest.ini |
| 14-Jul-2026 14:33:12 | collecting ... collected 5 items |
| 14-Jul-2026 14:33:12 | |
| 14-Jul-2026 14:33:12 | |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO ImageFactory::createImage Created Temp image of shape [10, 10, 10, 4] with float valued pixels. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set This image currently has no beams of any kind. Since channel and/or polarization were specified, a set of per plane beams, each equal to the specified beam, will be created. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 4 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 2 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 2 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 1 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 3 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 2 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 4 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 3 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 5 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 4 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 3 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 2 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 4 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 3 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 5 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 4 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 6 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 5 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 4 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 3 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 5 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 4 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 6 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 5 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 7 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 6 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 5 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 4 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 6 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 5 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 7 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 6 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 8 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 7 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 6 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 5 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 7 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 6 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 8 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 7 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 9 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 8 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 7 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 6 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 8 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 7 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 9 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 8 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 10 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 9 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 8 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 7 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 9 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 8 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 10 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 9 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 11 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 10 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 9 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 8 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 10 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 9 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 11 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 10 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 12 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 11 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 10 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 9 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 11 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 10 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 12 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 11 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 13 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 12 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 11 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 10 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 12 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 11 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 13 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 12 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set Beam parameters: Major : 14 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Minor : 13 arcsec |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO BeamManipulator::set+ Position Angle : 5 deg |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO ImageRegion::fromRecord Selected bounding box : |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO ImageRegion::fromRecord+ [2, 2, 2, 2] to [5, 5, 5, 3] (00:00:12.000, -00.03.00.000, 1.415e+09Hz, U to 00:00:00.000, +00.00.00.000, 1.415e+09Hz, V) |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO ImageRegion::fromRecord Selected bounding box : |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO ImageRegion::fromRecord+ [2, 2, 2, 2] to [5, 5, 5, 2] (00:00:12.000, -00.03.00.000, 1.415e+09Hz, U to 00:00:00.000, +00.00.00.000, 1.415e+09Hz, U) |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO ImageRegion::fromRecord Selected bounding box : |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO ImageRegion::fromRecord+ [2, 2, 6, 1] to [5, 5, 6, 3] (00:00:12.000, -00.03.00.000, 1.415e+09Hz, Q to 00:00:00.000, +00.00.00.000, 1.415e+09Hz, V) |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO name:: No table opened. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:12 | test_tool_image_subimage.py::ia_subimage_test::test_beams |
| 14-Jul-2026 14:33:12 | Test per plane beams |
| 14-Jul-2026 14:33:12 | PASSED |
| 14-Jul-2026 14:33:12 | |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO ImageFactory::createImage Created Paged image 'zz.im' of shape [20, 20] with float valued pixels. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO ::::ImageFactory::createImage Created Paged image 'zz.im' of shape [20, 20] with float valued pixels. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO ::::image::fromshape Ran ia.fromshape |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO ::::image::fromshape ia.fromshape(outfile="zz.im", shape=[20,20], csys={...}, linear=false, overwrite=false, log=true, type="f") |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO ::::image::subimage Ran ia.subimage |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO ::::image::subimage ia.subimage(outfile="", region="", mask="", dropdeg=false, overwrite=false, list=true, stretch=false, wantreturn=true, keepaxes=[]) |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO ImageFactory::createImage Created Paged image 'gg' of shape [20, 20] with float valued pixels. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:12 INFO ::::ImageFactory::createImage Created Paged image 'gg' of shape [20, 20] with float valued pixels. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO name:: No table opened. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:12 | test_tool_image_subimage.py::ia_subimage_test::test_history |
| 14-Jul-2026 14:33:12 | verify history writing |
| 14-Jul-2026 14:33:12 | PASSED |
| 14-Jul-2026 14:33:12 | |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageFactory::createImage Created Temp image of shape [10, 20, 30] with float valued pixels. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageRegion::fromRecord Selected bounding box : |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageRegion::fromRecord+ [0, 0, 0] to [9, 19, 29] (00:00:20.000, -00.10.00.001, 1.41498e+09Hz to 23:59:44.000, +00.09.00.001, 1.41501e+09Hz) |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageRegion::fromRecord Selected bounding box : |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageRegion::fromRecord+ [0, 0, 0] to [9, 19, 29] (00:00:20.000, -00.10.00.001, 1.41498e+09Hz to 23:59:44.000, +00.09.00.001, 1.41501e+09Hz) |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageFactory::createImage Created Paged image 'keep.im' of shape [10, 20, 1, 1] with float valued pixels. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageRegion::fromRecord Selected bounding box : |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [9, 19, 0, 0] (00:00:20.000, -00.10.00.001, I, 1.415e+09Hz to 23:59:44.000, +00.09.00.001, I, 1.415e+09Hz) |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageRegion::fromRecord Selected bounding box : |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [9, 19, 0, 0] (00:00:20.000, -00.10.00.001, I, 1.415e+09Hz to 23:59:44.000, +00.09.00.001, I, 1.415e+09Hz) |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageRegion::fromRecord Selected bounding box : |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [9, 19, 0, 0] (00:00:20.000, -00.10.00.001, I, 1.415e+09Hz to 23:59:44.000, +00.09.00.001, I, 1.415e+09Hz) |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO name:: No table opened. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:12 | test_tool_image_subimage.py::ia_subimage_test::test_keepaxes |
| 14-Jul-2026 14:33:12 | Test the keepaxes parameter |
| 14-Jul-2026 14:33:12 | PASSED |
| 14-Jul-2026 14:33:12 | |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageFactory::createImage Created Temp image of shape [2, 2] with float valued pixels. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageFactory::createImage Created Temp image of shape [2, 2] with Complex valued pixels. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageFactory::createImage Created Temp image of shape [2, 2] with double valued pixels. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageFactory::createImage Created Temp image of shape [2, 2] with DComplex valued pixels. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO name:: No table opened. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:12 | test_tool_image_subimage.py::ia_subimage_test::test_precision |
| 14-Jul-2026 14:33:12 | Test various precision valued image support |
| 14-Jul-2026 14:33:12 | PASSED |
| 14-Jul-2026 14:33:12 | |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageFactory::createImage Created Paged image 'mask1.im' of shape [20, 30, 4, 10] with float valued pixels. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageFactory::createImage Created Paged image 'mask2.im' of shape [20, 30, 4, 1] with float valued pixels. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageFactory::createImage Created Paged image 'mask3.im' of shape [20, 30, 4, 2] with float valued pixels. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageFactory::createImage Created Paged image 'xx.im' of shape [20, 30, 4, 10] with float valued pixels. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO name:: No table opened. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 SEVERE image::_detached (file src/tools/image/image_cmpt.cc, line 1653) Image is detached - cannot perform operation. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 SEVERE image::_detached (file src/tools/image/image_cmpt.cc, line 1653)+ Call image.open('filename') to reattach. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 SEVERE image::_detached (file src/tools/image/image_cmpt.cc, line 1653) Exception Reported: Exception: Unable to create image. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 SEVERE image::_detached (file src/tools/image/image_cmpt.cc, line 1653)+ ... thrown by casac::image* casac::image::subimage(const string&, const casac::variant&, const casac::variant&, bool, bool, bool, bool, bool, const std::vector<long int>&) at File: src/tools/image/image_cmpt.cc, line: 6163 |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO name:: No table opened. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 SEVERE image::subimage (file src/tools/image/image_cmpt.cc, line 6162) Exception Reported: Unable to extend mask: ExtendSpecifier - new nor stretch axes given at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 313 |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO name:: No table opened. |
| 14-Jul-2026 14:33:12 | 2026-07-14 18:33:13 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:12 | test_tool_image_subimage.py::ia_subimage_test::test_stretch |
| 14-Jul-2026 14:33:12 | Test the stretch parameter |
| 14-Jul-2026 14:33:12 | PASSED |
| 14-Jul-2026 14:33:12 | |
| 14-Jul-2026 14:33:12 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_subimage/nose.xml - |
| 14-Jul-2026 14:33:12 | ========================= 5 passed, 1 warning in 0.75s ========================= |
| 14-Jul-2026 14:33:13 | ============================= test session starts ============================== |
| 14-Jul-2026 14:33:13 | platform linux -- Python 3.12.9, pytest-9.1.1, pluggy-1.6.0 -- /home/casatest/venv/bin/python3.12 |
| 14-Jul-2026 14:33:13 | cachedir: .pytest_cache |
| 14-Jul-2026 14:33:13 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose |
| 14-Jul-2026 14:33:13 | configfile: pytest.ini |
| 14-Jul-2026 14:33:13 | collecting ... collected 6 items |
| 14-Jul-2026 14:33:13 | |
| 14-Jul-2026 14:33:13 | |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO SubImageFactory::createImage Creating image 'blahxx.im' of shape [1536, 1536, 1, 2] |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO name:: No table opened. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO name:: No table opened. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:13 | test_tool_image_transpose.py::ia_transpose_test::test_cas_2364 |
| 14-Jul-2026 14:33:13 | test CAS-2364 fix |
| 14-Jul-2026 14:33:13 | PASSED |
| 14-Jul-2026 14:33:13 | |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE image::open (file src/tools/image/image_cmpt.cc, line 4208) Exception Reported: Exception: File name is empty. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE image::open (file src/tools/image/image_cmpt.cc, line 4208)+ ... thrown by static void casa::ImageFactory::_checkInfile(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 371 |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE ImageTransposer::_getOrder Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2026-07-14 18:33:14 SEVERE ImageTransposer::_getOrder Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE ImageTransposer::_getOrder Axis number 0 specified multiple times in order parameter 10 . It can only be specified once. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2026-07-14 18:33:14 SEVERE ImageTransposer::_getOrder Axis number 0 specified multiple times in order parameter 10 . It can only be specified once. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663) Image has 3 axes but 2 were given. Number of given axes must match the number of image axes |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2026-07-14 18:33:14 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663) Image has 3 axes but 2 were given. Number of given axes must match the number of image axes |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2026-07-14 18:33:14 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE ImageTransposer::_getOrder Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2026-07-14 18:33:14 SEVERE ImageTransposer::_getOrder Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663) Image has 3 axes but 4 were given. Number of given axes must match the number of image axes |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2026-07-14 18:33:14 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663) Image has 3 axes but 4 were given. Number of given axes must match the number of image axes |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2026-07-14 18:33:14 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663) No axis matches requested axis s. Image axis names are [right ascension, declination, frequency] |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2026-07-14 18:33:14 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663) No axis matches requested axis s. Image axis names are [right ascension, declination, frequency] |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663) Ambiguous axis specification. Both r and r match image axis name right ascension |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2026-07-14 18:33:14 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663) Ambiguous axis specification. Both r and r match image axis name right ascension |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2026-07-14 18:33:14 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO name:: No table opened. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:13 | test_tool_image_transpose.py::ia_transpose_test::test_exceptions |
| 14-Jul-2026 14:33:13 | imtrans: Test various exception cases |
| 14-Jul-2026 14:33:13 | PASSED |
| 14-Jul-2026 14:33:13 | |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO ImageFactory::createImage Created Temp image of shape [10, 10, 4, 10] with float valued pixels. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO ::::ImageFactory::createImage Created Temp image of shape [10, 10, 4, 10] with float valued pixels. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO ::::image::fromshape Ran ia.fromshape |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO ::::image::fromshape ia.fromshape(outfile="", shape=[10,10,4,10], csys={...}, linear=false, overwrite=false, log=true, type="f") |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO ::::image::transpose Ran ia.transpose |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO ::::image::transpose ia.transpose(outfile="", order="3210") |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO name:: No table opened. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:13 | test_tool_image_transpose.py::ia_transpose_test::test_history |
| 14-Jul-2026 14:33:13 | Test history records are written |
| 14-Jul-2026 14:33:13 | PASSED |
| 14-Jul-2026 14:33:13 | |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO ImageFactory::createImage Created Temp image of shape [10, 20, 30] with float valued pixels. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO BeamManipulator::set Setting (global) restoring beam. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO BeamManipulator::set Beam parameters: Major : 4 arcmin |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO BeamManipulator::set+ Minor : 3 arcmin |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO BeamManipulator::set+ Position Angle : 0 deg |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO name:: No table opened. |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:13 | test_tool_image_transpose.py::ia_transpose_test::test_imageinfo |
| 14-Jul-2026 14:33:13 | Verify image info is copied |
| 14-Jul-2026 14:33:13 | PASSED |
| 14-Jul-2026 14:33:13 | |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO SubImageFactory::createImage Creating image 'straight_copy_0' of shape [5, 6, 7] |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO SubImageFactory::createImage Creating image 'straight_copy_1' of shape [5, 6, 7] |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO SubImageFactory::createImage Creating image 'straight_copy_2' of shape [5, 6, 7] |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO ImageTransposer::transpose Old to new axis mapping is [0, 1, 2] |
| 14-Jul-2026 14:33:13 | 2026-07-14 18:33:14 INFO SubImageFactory::createImage Creating image 'straight_copy_3' of shape [5, 6, 7] |
| 14-Jul-2026 14:33:14 | 2026-07-14 18:33:14 INFO ImageTransposer::transpose Old to new axis mapping is [0, 1, 2] |
| 14-Jul-2026 14:33:14 | 2026-07-14 18:33:14 INFO name:: No table opened. |
| 14-Jul-2026 14:33:14 | 2026-07-14 18:33:14 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:14 | test_tool_image_transpose.py::ia_transpose_test::test_straight_copy |
| 14-Jul-2026 14:33:14 | No actual transposing |
| 14-Jul-2026 14:33:14 | PASSED |
| 14-Jul-2026 14:33:14 | |
| 14-Jul-2026 14:33:14 | 2026-07-14 18:33:14 INFO SubImageFactory::createImage Creating image 'transpose_0' of shape [6, 7, 5] |
| 14-Jul-2026 14:33:14 | 2026-07-14 18:33:14 INFO SubImageFactory::createImage Creating image 'transpose_1' of shape [6, 7, 5] |
| 14-Jul-2026 14:33:14 | 2026-07-14 18:33:14 INFO SubImageFactory::createImage Creating image 'transpose_2' of shape [6, 7, 5] |
| 14-Jul-2026 14:33:14 | 2026-07-14 18:33:14 INFO ImageTransposer::transpose Old to new axis mapping is [1, 2, 0] |
| 14-Jul-2026 14:33:14 | 2026-07-14 18:33:14 INFO ImageTransposer::transpose Old to new axis mapping is [1, 2, 0] |
| 14-Jul-2026 14:33:14 | 2026-07-14 18:33:14 INFO SubImageFactory::createImage Creating image 'transpose_3' of shape [6, 7, 5] |
| 14-Jul-2026 14:33:14 | 2026-07-14 18:33:14 INFO ImageTransposer::transpose Old to new axis mapping is [1, 2, 0] |
| 14-Jul-2026 14:33:14 | 2026-07-14 18:33:14 INFO ImageTransposer::transpose Old to new axis mapping is [1, 2, 0] |
| 14-Jul-2026 14:33:14 | 2026-07-14 18:33:14 INFO name:: No table opened. |
| 14-Jul-2026 14:33:14 | 2026-07-14 18:33:14 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:14 | test_tool_image_transpose.py::ia_transpose_test::test_transpose |
| 14-Jul-2026 14:33:14 | Test transposing |
| 14-Jul-2026 14:33:14 | PASSED |
| 14-Jul-2026 14:33:14 | |
| 14-Jul-2026 14:33:14 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_transpose/nose.xml - |
| 14-Jul-2026 14:33:14 | ========================= 6 passed, 1 warning in 1.22s ========================= |
| 14-Jul-2026 14:33:14 | ============================= test session starts ============================== |
| 14-Jul-2026 14:33:14 | platform linux -- Python 3.12.9, pytest-9.1.1, pluggy-1.6.0 -- /home/casatest/venv/bin/python3.12 |
| 14-Jul-2026 14:33:14 | cachedir: .pytest_cache |
| 14-Jul-2026 14:33:14 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic |
| 14-Jul-2026 14:33:14 | configfile: pytest.ini |
| 14-Jul-2026 14:33:15 | collecting ... collected 5 items |
| 14-Jul-2026 14:33:15 | |
| 14-Jul-2026 14:33:15 | |
| 14-Jul-2026 14:33:15 | 2026-07-14 18:33:16 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 14-Jul-2026 14:33:17 | 2026-07-14 18:33:17 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 14-Jul-2026 14:33:18 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_noise |
| 14-Jul-2026 14:33:18 | test_flat_noise (flat noise type with flat noise input) |
| 14-Jul-2026 14:33:18 | PASSED |
| 14-Jul-2026 14:33:18 | |
| 14-Jul-2026 14:33:18 | 2026-07-14 18:33:18 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 14-Jul-2026 14:33:18 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_noise_existing_image |
| 14-Jul-2026 14:33:18 | test_flat_noise_existing image (flat noise type onto an existing image) |
| 14-Jul-2026 14:33:18 | PASSED |
| 14-Jul-2026 14:33:18 | |
| 14-Jul-2026 14:33:21 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_noise_flat_sky_input |
| 14-Jul-2026 14:33:21 | test_flat_noise_flat_sky_input (flat noise type with flat sky input) |
| 14-Jul-2026 14:33:21 | PASSED |
| 14-Jul-2026 14:33:21 | |
| 14-Jul-2026 14:33:24 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_sky |
| 14-Jul-2026 14:33:24 | test_flat_sky (flat sky type with flat noise input |
| 14-Jul-2026 14:33:24 | PASSED |
| 14-Jul-2026 14:33:24 | |
| 14-Jul-2026 14:33:27 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_sky_flat_sky_input |
| 14-Jul-2026 14:33:27 | test_flat_sky_flat_sky_input (flat sky type with flat sky inputs) |
| 14-Jul-2026 14:33:27 | PASSED |
| 14-Jul-2026 14:33:27 | |
| 14-Jul-2026 14:33:27 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_linearmosaic/nose.xml - |
| 14-Jul-2026 14:33:27 | ======================== 5 passed, 1 warning in 13.31s ========================= |
| 14-Jul-2026 14:33:28 | ============================= test session starts ============================== |
| 14-Jul-2026 14:33:28 | platform linux -- Python 3.12.9, pytest-9.1.1, pluggy-1.6.0 -- /home/casatest/venv/bin/python3.12 |
| 14-Jul-2026 14:33:28 | cachedir: .pytest_cache |
| 14-Jul-2026 14:33:28 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid |
| 14-Jul-2026 14:33:28 | configfile: pytest.ini |
| 14-Jul-2026 14:33:28 | collecting ... collected 11 items |
| 14-Jul-2026 14:33:28 | |
| 14-Jul-2026 14:33:28 | |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO ImageFactory::createImage Created Temp image of shape [10, 10, 1, 1] with float valued pixels. |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO ImageRegrid::_checkAxes The Stokes axis cannot be regridded - removing from list |
| 14-Jul-2026 14:33:28 | test_tool_image_regrid.py::ia_regrid_test::test_CAS_4262 |
| 14-Jul-2026 14:33:28 | Test degenerate axes are not relabeled to template |
| 14-Jul-2026 14:33:28 | PASSED |
| 14-Jul-2026 14:33:28 | |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO ImageFactory::createImage Created Temp image of shape [100, 100, 1, 1] with float valued pixels. |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap. |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO SubImageFactory::createImage Creating image 'moulou1' of shape [100, 100, 1, 1] |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO name:: No table opened. |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:28 | test_tool_image_regrid.py::ia_regrid_test::test_CAS_4315 |
| 14-Jul-2026 14:33:28 | test ia.regrid does not leave image open after tool is closed |
| 14-Jul-2026 14:33:28 | PASSED |
| 14-Jul-2026 14:33:28 | |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO SubImageFactory::createImage Creating image 'junk' of shape [20, 20, 100] |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO name:: No table opened. |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:28 | test_tool_image_regrid.py::ia_regrid_test::test_asvelocity |
| 14-Jul-2026 14:33:28 | Test regrid by velocity |
| 14-Jul-2026 14:33:28 | PASSED |
| 14-Jul-2026 14:33:28 | |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap. |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap. |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO ImageFactory::createImage Created Temp image of shape [100, 100] with Complex valued pixels. |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap. |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO ImageFactory::createImage Created Temp image of shape [100, 100] with double valued pixels. |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap. |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 14-Jul-2026 14:33:28 | 2026-07-14 18:33:29 INFO ImageFactory::createImage Created Temp image of shape [100, 100] with double valued pixels. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageFactory::createImage Created Temp image of shape [100, 100] with DComplex valued pixels. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap. |
| 14-Jul-2026 14:33:29 | test_tool_image_regrid.py::ia_regrid_test::test_complex |
| 14-Jul-2026 14:33:29 | Test regridding a complex image, CAS-1390 |
| 14-Jul-2026 14:33:29 | PASSED |
| 14-Jul-2026 14:33:29 | |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageFactory::createImage Created Temp image of shape [10, 10, 10] with float valued pixels. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 SEVERE image::regrid Exception Reported: Exception: The output image has only 10 pixels along axis 0, so the maximum value of decimate should be 3. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 SEVERE image::regrid+ ... thrown by void casa::ImageRegridderBase<T>::setDecimate(casacore::Int) [with T = float; casacore::Int = int] at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRegridderBase.tcc, line: 75 |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:29 | test_tool_image_regrid.py::ia_regrid_test::test_decimate |
| 14-Jul-2026 14:33:29 | ia.regrid, test too high a value for decimate throws exception - CAS-5313 |
| 14-Jul-2026 14:33:29 | PASSED |
| 14-Jul-2026 14:33:29 | |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageFactory::createImage Created Paged image 'ia.fromshape.image1' of shape [32, 32, 32] with float valued pixels. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 SEVERE image::regrid Exception Reported: (/source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc : 925) Failed AlwaysAssert axisInCoordinateSystem < nPixelAxes() |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 WARN ImageRegrid<T>::makeCoordinateSystem (file /source/casa6/casatools/casacore/casacore/images/Images/ImageRegrid.tcc, line 631) Direction coordinate is not present in the output coordinate system, so it cannot be regridded |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 WARN ImageRegrid<T>::makeCoordinateSystem (file /source/casa6/casatools/casacore/casacore/images/Images/ImageRegrid.tcc, line 631) Spectral coordinate is not present in the output coordinate system, so it cannot be regridded |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 SEVERE image::regrid Exception Reported: Exception: The number of pixel axes in the output shape and Coordinate System must be the same. Shape has size 4. Output coordinate system has 3 axes. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 SEVERE image::regrid+ ... thrown by std::shared_ptr<casacore::ImageInterface<T> > casa::ImageRegridder<T>::_regrid() const [with T = float] at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRegridder.tcc, line: 136 |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 SEVERE image::regrid Exception Reported: Unknown interpolation method doggies |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 WARN ImageRegrid<T>::makeCoordinateSystem (file /source/casa6/casatools/casacore/casacore/images/Images/ImageRegrid.tcc, line 631) Direction coordinate is not present in the output coordinate system, so it cannot be regridded |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 WARN ImageRegrid<T>::makeCoordinateSystem (file /source/casa6/casatools/casacore/casacore/images/Images/ImageRegrid.tcc, line 631) Spectral coordinate is not present in the output coordinate system, so it cannot be regridded |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 WARN ImageRegrid<T>::makeCoordinateSystem (file /source/casa6/casatools/casacore/casacore/images/Images/ImageRegrid.tcc, line 631) Direction coordinate is not present in the output coordinate system, so it cannot be regridded |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 WARN ImageRegrid<T>::makeCoordinateSystem (file /source/casa6/casatools/casacore/casacore/images/Images/ImageRegrid.tcc, line 631) Spectral coordinate is not present in the output coordinate system, so it cannot be regridded |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO name:: No table opened. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:29 | test_tool_image_regrid.py::ia_regrid_test::test_general |
| 14-Jul-2026 14:33:29 | ia.regrid general tests |
| 14-Jul-2026 14:33:29 | PASSED |
| 14-Jul-2026 14:33:29 | |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 14-Jul-2026 14:33:29 | test_tool_image_regrid.py::ia_regrid_test::test_linear_overlap |
| 14-Jul-2026 14:33:29 | Test that overlapping linear coordinates works, CAS-5767 |
| 14-Jul-2026 14:33:29 | PASSED |
| 14-Jul-2026 14:33:29 | |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageFactory::createImage Created Temp image of shape [100, 100, 20] with float valued pixels. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO BeamManipulator::set This image currently has no beams of any kind. Since channel and/or polarization were specified, a set of per plane beams, each equal to the specified beam, will be created. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO BeamManipulator::set Beam parameters: Major : 20 arcsec |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO BeamManipulator::set+ Minor : 20 arcsec |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO BeamManipulator::set+ Position Angle : 0 deg |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO BeamManipulator::set Beam parameters: Major : 30 arcsec |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO BeamManipulator::set+ Minor : 30 arcsec |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO BeamManipulator::set+ Position Angle : 0 deg |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 SEVERE image::regrid Exception Reported: Exception: An image with multiple beams cannot be regridded along the spectral axis. You may wish to convolve all channels to a common resolution and retry. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 SEVERE image::regrid+ ... thrown by std::shared_ptr<casacore::ImageInterface<T> > casa::ImageRegridder<T>::regrid() const [with T = float] at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRegridder.tcc, line: 83 |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 SEVERE image::regrid Exception Reported: Exception: An image with multiple beams cannot be regridded along the spectral axis. You may wish to convolve all channels to a common resolution and retry. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 SEVERE image::regrid+ ... thrown by std::shared_ptr<casacore::ImageInterface<T> > casa::ImageRegridder<T>::regrid() const [with T = float] at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRegridder.tcc, line: 97 |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 14-Jul-2026 14:33:29 | test_tool_image_regrid.py::ia_regrid_test::test_multibeam |
| 14-Jul-2026 14:33:29 | test multibeams cannot be regridded |
| 14-Jul-2026 14:33:29 | PASSED |
| 14-Jul-2026 14:33:29 | |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageFactory::createImage Created Temp image of shape [20, 20, 20, 4] with float valued pixels. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO ImageRegrid::_checkAxes The Stokes axis cannot be regridded - removing from list |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:29 INFO SubImageFactory::createImage Creating image 'first' of shape [20, 20, 20, 4] |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 SEVERE image::regrid Exception Reported: Exception: There is no overlap between the (region chosen in) the input image and the output image with respect to the axes being regridded.. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 SEVERE image::regrid+ ... thrown by std::shared_ptr<casacore::ImageInterface<T> > casa::ImageRegridder<T>::_regrid() const [with T = float] at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRegridder.tcc, line: 151 |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 INFO SubImageFactory::createImage Creating image 'fourth' of shape [20, 20, 20, 4] |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 INFO ImageFactory::createImage Created Temp image of shape [200, 200, 20, 4] with float valued pixels. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 INFO ImageRegrid::_checkAxes The Stokes axis cannot be regridded - removing from list |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 INFO SubImageFactory::createImage Creating image 'third' of shape [200, 200, 20, 4] |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 SEVERE image::regrid Exception Reported: Exception: There is no overlap between the (region chosen in) the input image and the output image with respect to the axes being regridded.. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 SEVERE image::regrid+ ... thrown by std::shared_ptr<casacore::ImageInterface<T> > casa::ImageRegridder<T>::_regrid() const [with T = float] at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRegridder.tcc, line: 151 |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 INFO ImageFactory::createImage Created Temp image of shape [20, 20, 1001, 4] with float valued pixels. |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 INFO SubImageFactory::createImage Creating image 'sixth' of shape [20, 20, 1001, 4] |
| 14-Jul-2026 14:33:29 | 2026-07-14 18:33:30 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:30 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:30 SEVERE image::regrid Exception Reported: Exception: There is no overlap between the (region chosen in) the input image and the output image with respect to the axes being regridded.. |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:30 SEVERE image::regrid+ ... thrown by std::shared_ptr<casacore::ImageInterface<T> > casa::ImageRegridder<T>::_regrid() const [with T = float] at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRegridder.tcc, line: 151 |
| 14-Jul-2026 14:33:30 | test_tool_image_regrid.py::ia_regrid_test::test_overlap |
| 14-Jul-2026 14:33:30 | Test for notification if no overlap between input and output images |
| 14-Jul-2026 14:33:30 | PASSED |
| 14-Jul-2026 14:33:30 | |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:30 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:30 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap. |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:30 INFO ImageRegrid::_checkAxes The Stokes axis cannot be regridded - removing from list |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:30 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:30 INFO SubImageFactory::createImage Creating image 'gal_regrid_out.image' of shape [300, 300, 1, 46] |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:30 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:30 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 14-Jul-2026 14:33:30 | test_tool_image_regrid.py::ia_regrid_test::test_regrid_galactic |
| 14-Jul-2026 14:33:30 | Verify fix for CAS-5534 |
| 14-Jul-2026 14:33:30 | PASSED |
| 14-Jul-2026 14:33:30 | |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:31 INFO ImageFactory::createImage Created Paged image 'maskim' of shape [200, 200, 1, 1] with float valued pixels. |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:31 INFO ImageFactory::createImage Created Temp image of shape [200, 200, 1, 20] with float valued pixels. |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:31 SEVERE image::regrid Exception Reported: The input image shape ([200, 200, 1, 20]) and mask shape ([200, 200, 1, 1]) are different, and it was specified that the mask should not be extended, so the mask cannot be applied to the (sub)image. Specifying that the mask should be extended may resolve the issue at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 306 |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:31 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:31 INFO CasacRegionManager::fromBCS Using polarizations ALL |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:31 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:31 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap. |
| 14-Jul-2026 14:33:30 | 2026-07-14 18:33:31 INFO ImageRegrid::_checkAxes The Stokes axis cannot be regridded - removing from list |
| 14-Jul-2026 14:33:31 | 2026-07-14 18:33:31 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 14-Jul-2026 14:33:31 | 2026-07-14 18:33:31 SEVERE image::regrid Exception Reported: The input image shape ([200, 200, 1, 20]) and mask shape ([200, 200, 1, 1]) are different, and it was specified that the mask should not be extended, so the mask cannot be applied to the (sub)image. Specifying that the mask should be extended may resolve the issue at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 306 |
| 14-Jul-2026 14:33:31 | 2026-07-14 18:33:31 INFO ImageMaskAttacher::makeMask Created and initialized mask `mask0' |
| 14-Jul-2026 14:33:31 | 2026-07-14 18:33:31 WARN ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap. |
| 14-Jul-2026 14:33:31 | 2026-07-14 18:33:31 INFO ImageRegrid::_checkAxes The Stokes axis cannot be regridded - removing from list |
| 14-Jul-2026 14:33:31 | 2026-07-14 18:33:31 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 14-Jul-2026 14:33:31 | 2026-07-14 18:33:31 INFO name:: No table opened. |
| 14-Jul-2026 14:33:31 | 2026-07-14 18:33:31 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:31 | 2026-07-14 18:33:31 INFO name:: No table opened. |
| 14-Jul-2026 14:33:31 | test_tool_image_regrid.py::ia_regrid_test::test_stretch |
| 14-Jul-2026 14:33:31 | 2026-07-14 18:33:31 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:31 | ia.regrid(): Test stretch parameter |
| 14-Jul-2026 14:33:31 | PASSED |
| 14-Jul-2026 14:33:31 | |
| 14-Jul-2026 14:33:31 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_regrid/nose.xml - |
| 14-Jul-2026 14:33:31 | ======================== 11 passed, 1 warning in 3.23s ========================= |
| 14-Jul-2026 14:33:31 | ============================= test session starts ============================== |
| 14-Jul-2026 14:33:31 | platform linux -- Python 3.12.9, pytest-9.1.1, pluggy-1.6.0 -- /home/casatest/venv/bin/python3.12 |
| 14-Jul-2026 14:33:31 | cachedir: .pytest_cache |
| 14-Jul-2026 14:33:31 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol |
| 14-Jul-2026 14:33:31 | configfile: pytest.ini |
| 14-Jul-2026 14:33:32 | collecting ... collected 17 items |
| 14-Jul-2026 14:33:32 | |
| 14-Jul-2026 14:33:32 | |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 INFO imagepol::complexFractionalLinearPolarization(...) Creating image 'g' of shape [10, 10, 10, 1] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 INFO imagepol::complexFractionalLinearPolarization(...) Creating image 'hh' of shape [10, 10, 10, 1] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 SEVERE imagepol::complexfraclinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 SEVERE imagepol::complexfraclinpol+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
| 14-Jul-2026 14:33:32 | test_tool_imagepol.py::po_complexfraclinpol_test::test_multibeam |
| 14-Jul-2026 14:33:32 | Test multibeam images for correct behavior |
| 14-Jul-2026 14:33:32 | pol_eq_beams.fits |
| 14-Jul-2026 14:33:32 | PASSED |
| 14-Jul-2026 14:33:32 | |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 INFO ImagePolProxy::complexlinpol Creating image 'g' of shape [10, 10, 10, 1] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 INFO ImagePolProxy::complexlinpol Creating image 'hh' of shape [10, 10, 10, 1] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 SEVERE imagepol::complexlinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 SEVERE imagepol::complexlinpol+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 INFO name:: No table opened. |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 INFO showcache:: The Table Cache is empty. |
| 14-Jul-2026 14:33:32 | test_tool_imagepol.py::po_complexlinpol_test::test_multibeam |
| 14-Jul-2026 14:33:32 | Test multibeam images for correct behavior |
| 14-Jul-2026 14:33:32 | PASSED |
| 14-Jul-2026 14:33:32 | |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 SEVERE imagepol::depolratio Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 SEVERE imagepol::depolratio+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 SEVERE imagepol::depolratio Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 SEVERE imagepol::depolratio+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
| 14-Jul-2026 14:33:32 | test_tool_imagepol.py::po_depolratio_test::test_multibeam |
| 14-Jul-2026 14:33:32 | Test multibeam images for correct behavior |
| 14-Jul-2026 14:33:32 | pol_eq_beams.fits |
| 14-Jul-2026 14:33:32 | PASSED |
| 14-Jul-2026 14:33:32 | |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:32 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 SEVERE imagepol::fourierrotationmeasure Exception Reported: 2026-07-14 18:33:33 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 SEVERE imagepol::fourierrotationmeasure Exception Reported: 2026-07-14 18:33:33 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
| 14-Jul-2026 14:33:32 | test_tool_imagepol.py::po_fourierrotationmeasure_test::test_multibeam |
| 14-Jul-2026 14:33:32 | Test multibeam images for correct behavior |
| 14-Jul-2026 14:33:32 | pol_eq_beams.fits |
| 14-Jul-2026 14:33:32 | PASSED |
| 14-Jul-2026 14:33:32 | |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImagePolarimetry::fracLinPol Debiasing with sigma = 1.0119 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | test_tool_imagepol.py::po_fraclinpol_test::test_multibeam |
| 14-Jul-2026 14:33:32 | Test multibeam images for correct behavior |
| 14-Jul-2026 14:33:32 | pol_eq_beams.fits |
| 14-Jul-2026 14:33:32 | PASSED |
| 14-Jul-2026 14:33:32 | |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImagePolarimetry::fracTotPol Debiasing with sigma = 1.0119 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | test_tool_imagepol.py::po_fractotpol_test::test_multibeam |
| 14-Jul-2026 14:33:32 | Test multibeam images for correct behavior |
| 14-Jul-2026 14:33:32 | pol_eq_beams.fits |
| 14-Jul-2026 14:33:32 | PASSED |
| 14-Jul-2026 14:33:32 | |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImagePolTask::_sigma Determined noise from V image to be 1.0119 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImagePolTask::_sigma Debiasing with sigma = 1.0119 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | test_tool_imagepol.py::po_linpolint_test::test_multibeam |
| 14-Jul-2026 14:33:32 | Test multibeam images for correct behavior |
| 14-Jul-2026 14:33:32 | pol_eq_beams.fits |
| 14-Jul-2026 14:33:32 | PASSED |
| 14-Jul-2026 14:33:32 | |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 WARN LinearPolarizationAngleCalculator::compute (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/LinearPolarizationAngleCalculator.cc, line 40) The input image has multiple beams. Because these beams can vary with stokes/polarization, they will not be copied to the output image |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO SubImageFactory::createImage Creating image 'g' of shape [10, 10, 10, 1] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 SEVERE imagepol::linpolposang Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 SEVERE imagepol::linpolposang+ ... thrown by casacore::Bool casa::ImagePolTask::_checkBeams(const std::vector<casa::ImagePolTask::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolTask.cc, line: 79 |
| 14-Jul-2026 14:33:32 | test_tool_imagepol.py::po_linpolposang_test::test_multibeam |
| 14-Jul-2026 14:33:32 | Test multibeam images for correct behavior |
| 14-Jul-2026 14:33:32 | pol_eq_beams.fits |
| 14-Jul-2026 14:33:32 | PASSED |
| 14-Jul-2026 14:33:32 | |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFactory::createImage Created Paged image 'rm_input.im' of shape [20, 20, 4, 20] with float valued pixels. |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImagePol::rotationMeasure Creating image 'rm.im' of shape [20, 20] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImagePol::rotationMeasure Creating image 'pa0.im' of shape [20, 20, 1] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO image::statistics Determining stats for image rm.im |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageRegion::fromRecord Selected bounding box : |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageRegion::fromRecord+ [0, 0] to [19, 19] (00:00:40.000, -00.10.00.001 to 23:59:24.000, +00.09.00.001) |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::_logStartup Statistics calculated using Classic algorithm |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::_logStartup Regions --- |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (pixel) [blc]: [0, 0] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::_logStartup -- top-right corner (pixel) [trc]: [19, 19] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (world) [blcf]: 00:00:40.000, -00.10.00.001 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::_logStartup -- top-right corner (world) [trcf]: 23:59:24.000, +00.09.00.001 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO Values --- |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- number of points [npts]: 400 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- maximum value [max]: 9.60001 rad/m/m |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- minimum value [min]: 9.59997 rad/m/m |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- position of max value (pixel) [maxpos]: [3, 0] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- position of min value (pixel) [minpos]: [1, 0] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- position of max value (world) [maxposf]: 00:00:28.000, -00.10.00.001 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- position of min value (world) [minposf]: 00:00:36.000, -00.10.00.001 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- Sum of pixel values [sum]: 3839.99 rad/m/m |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- Sum of squared pixel values [sumsq]: 36863.9 rad/m/m.rad/m/m |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO Statistics --- |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- Mean of the pixel values [mean]: 9.59998 rad/m/m |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- Variance of the pixel values : 9.48741e-11 rad/m/m |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- Standard deviation of the Mean [sigma]: 9.74033e-06 rad/m/m |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- Root mean square [rms]: 9.59998 rad/m/m |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::statistics Sum column unit = rad/m/m |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::statistics+ Mean column unit = rad/m/m |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::statistics+ Std_dev column unit = rad/m/m |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::statistics+ Minimum column unit = rad/m/m |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::statistics+ Maximum column unit = rad/m/m |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::statistics Npts Sum Mean Rms Std_dev Minimum Maximum |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::statistics 4.000000e+02 3.839993e+03 9.599982e+00 9.599982e+00 9.740334e-06 9.599969e+00 9.600007e+00 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO deleted table /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/rm.im |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO image::statistics Determining stats for image pa0.im |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO CasacRegionManager::fromBCS Using polarizations ALL |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageRegion::fromRecord Selected bounding box : |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageRegion::fromRecord+ [0, 0, 0] to [19, 19, 0] (00:00:40.000, -00.10.00.001, Pangle to 23:59:24.000, +00.09.00.001, Pangle) |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::_logStartup Statistics calculated using Classic algorithm |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::_logStartup Regions --- |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (pixel) [blc]: [0, 0, 0] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::_logStartup -- top-right corner (pixel) [trc]: [19, 19, 0] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (world) [blcf]: 00:00:40.000, -00.10.00.001, Pangle |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::_logStartup -- top-right corner (world) [trcf]: 23:59:24.000, +00.09.00.001, Pangle |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO Values --- |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- number of points [npts]: 400 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- maximum value [max]: 22.5001 deg |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- minimum value [min]: 22.5 deg |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- position of max value (pixel) [maxpos]: [1, 0, 0] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- position of min value (pixel) [minpos]: [3, 0, 0] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- position of max value (world) [maxposf]: 00:00:36.000, -00.10.00.001, Pangle |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- position of min value (world) [minposf]: 00:00:28.000, -00.10.00.001, Pangle |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- Sum of pixel values [sum]: 9000.02 deg |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- Sum of squared pixel values [sumsq]: 202501 deg.deg |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO Statistics --- |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- Mean of the pixel values [mean]: 22.5 deg |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- Variance of the pixel values : 6.26899e-10 deg |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- Standard deviation of the Mean [sigma]: 2.5038e-05 deg |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO -- Root mean square [rms]: 22.5 deg |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::statistics Sum column unit = deg |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::statistics+ Mean column unit = deg |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::statistics+ Std_dev column unit = deg |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::statistics+ Minimum column unit = deg |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::statistics+ Maximum column unit = deg |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::statistics Npts Sum Mean Rms Std_dev Minimum Maximum |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageStatsCalculator::statistics 4.000000e+02 9.000018e+03 2.250005e+01 2.250005e+01 2.503796e-05 2.249998e+01 2.250008e+01 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO deleted table /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/pa0.im |
| 14-Jul-2026 14:33:32 | test_tool_imagepol.py::po_rotationmeasure_test::test_algorithm |
| 14-Jul-2026 14:33:32 | Test rotation measure computation algorithm |
| 14-Jul-2026 14:33:32 | PASSED |
| 14-Jul-2026 14:33:32 | |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImagePol::rotationMeasure Creating image 'g' of shape [10, 10] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImagePol::rotationMeasure Creating image 'hh' of shape [10, 10] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 SEVERE imagepol::rotationmeasure Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 SEVERE imagepol::rotationmeasure+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
| 14-Jul-2026 14:33:32 | test_tool_imagepol.py::po_rotationmeasure_test::test_multibeam |
| 14-Jul-2026 14:33:32 | Test multibeam images for correct behavior |
| 14-Jul-2026 14:33:32 | PASSED |
| 14-Jul-2026 14:33:32 | |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 14-Jul-2026 14:33:32 | test_tool_imagepol.py::po_sigma_test::test_multibeam |
| 14-Jul-2026 14:33:32 | Test multibeam images for correct behavior |
| 14-Jul-2026 14:33:32 | pol_eq_beams.fits |
| 14-Jul-2026 14:33:32 | PASSED |
| 14-Jul-2026 14:33:32 | |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 SEVERE imagepol::sigmadepolratio Exception Reported: Exception: Beams or beamsets are not equal between the two images, caonnot perform calculation. |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 SEVERE imagepol::sigmadepolratio+ ... thrown by static void casa::ImagePolarimetry::_checkBeams(const casa::ImagePolarimetry&, const casa::ImagePolarimetry&, const casacore::Vector<casa::ImagePolarimetry::StokesTypes>&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1686 |
| 14-Jul-2026 14:33:32 | test_tool_imagepol.py::po_sigmadepolratio_test::test_multibeam |
| 14-Jul-2026 14:33:32 | Test multibeam images for correct behavior |
| 14-Jul-2026 14:33:32 | PASSED |
| 14-Jul-2026 14:33:32 | |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO imagepol::sigmaFracLinPol Creating image 'g' of shape [10, 10, 10, 1] |
| 14-Jul-2026 14:33:32 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 SEVERE imagepol::sigmafraclinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 SEVERE imagepol::sigmafraclinpol+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
| 14-Jul-2026 14:33:33 | test_tool_imagepol.py::po_sigmafraclinpol_test::test_multibeam |
| 14-Jul-2026 14:33:33 | Test multibeam images for correct behavior |
| 14-Jul-2026 14:33:33 | PASSED |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 INFO imagepol::sigmaFracTotPol Creating image 'g' of shape [10, 10, 10, 1] |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 WARN ImagePolarimetry::_setDoLinDoCirc (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line 272) I, Q, and U beams are not the same, cannot do linear portion |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 WARN ImagePolarimetry::_setDoLinDoCirc (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line 272) I and V beams are not the same, cannot do circular portion |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 SEVERE imagepol::sigmafractotpol Exception Reported: Exception: Can do neither linear nor circular portions. |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 SEVERE imagepol::sigmafractotpol+ ... thrown by void casa::ImagePolarimetry::_setDoLinDoCirc(casacore::Bool&, casacore::Bool&) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 292 |
| 14-Jul-2026 14:33:33 | test_tool_imagepol.py::po_sigmafractotpol_test::test_multibeam |
| 14-Jul-2026 14:33:33 | Test multibeam images for correct behavior |
| 14-Jul-2026 14:33:33 | PASSED |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 SEVERE imagepol::sigmalinpolint Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 SEVERE imagepol::sigmalinpolint+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
| 14-Jul-2026 14:33:33 | test_tool_imagepol.py::po_sigmalinpolint_test::test_multibeam |
| 14-Jul-2026 14:33:33 | Test multibeam images for correct behavior |
| 14-Jul-2026 14:33:33 | PASSED |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 INFO imagepol::sigmaLinPolPosAng Creating image 'g' of shape [10, 10, 10, 1] |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 SEVERE imagepol::sigmalinpolposang Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 SEVERE imagepol::sigmalinpolposang+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
| 14-Jul-2026 14:33:33 | test_tool_imagepol.py::po_sigmalinpolposang_test::test_multibeam |
| 14-Jul-2026 14:33:33 | Test multibeam images for correct behavior |
| 14-Jul-2026 14:33:33 | PASSED |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 INFO ImagePolTask::_sigma Determined noise from V image to be 1.0119 |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 INFO ImagePolTask::_sigma Debiasing with sigma = 1.0119 |
| 14-Jul-2026 14:33:33 | 2026-07-14 18:33:33 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 14-Jul-2026 14:33:33 | test_tool_imagepol.py::po_totpolint_test::test_multibeam |
| 14-Jul-2026 14:33:33 | Test multibeam images for correct behavior |
| 14-Jul-2026 14:33:33 | PASSED |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml - |
| 14-Jul-2026 14:33:33 | ======================== 17 passed, 1 warning in 1.36s ========================= |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_vpmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_sdm/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_quanta/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta/ |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_coordsys/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys/ |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_rebin/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msuvbinner/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_table/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_table |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_table/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_table/ |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_measures/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_measures |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_measures/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_measures/ |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_statwt/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msmetadata/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pbcor/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image/ |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_subimage/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_subimage |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_subimage/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_subimage/ |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_transpose/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_linearmosaic/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_regrid/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 14-Jul-2026 14:33:33 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol |
| 14-Jul-2026 14:33:33 | |
| 14-Jul-2026 14:33:33 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 14-Jul-2026 14:33:34 | total 77812 |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci 15001 160890 Jul 14 18:14 casatestutils-6.7.6.8a100.dev0+dirty-py3-none-any.whl |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci 15001 79347504 Jul 14 18:14 casatools-6.7.6.8a100.dev0+dirty-cp312-cp312-manylinux_2_28_x86_64.whl |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 4340 Jul 14 18:33 test_tool_agentflagger.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 1006 Jul 14 18:33 test_tool_calanalysis.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 2658 Jul 14 18:33 test_tool_calibrater.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 687 Jul 14 18:33 test_tool_componentlist.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 7467 Jul 14 18:33 test_tool_coordsys.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 12935 Jul 14 18:33 test_tool_image.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 2220 Jul 14 18:33 test_tool_image_collapse.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 1048 Jul 14 18:33 test_tool_image_deviation.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 2575 Jul 14 18:33 test_tool_image_fitprofile.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 1178 Jul 14 18:33 test_tool_image_pbcor.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 883 Jul 14 18:33 test_tool_image_pv.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 1006 Jul 14 18:33 test_tool_image_rebin.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 1336 Jul 14 18:33 test_tool_image_regrid.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 1641 Jul 14 18:33 test_tool_image_statistics.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 765 Jul 14 18:33 test_tool_image_subimage.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 890 Jul 14 18:33 test_tool_image_transpose.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 1966 Jul 14 18:33 test_tool_imagepol.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 839 Jul 14 18:33 test_tool_linearmosaic.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 669 Jul 14 18:33 test_tool_logsink.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 549 Jul 14 18:33 test_tool_measures.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 5224 Jul 14 18:33 test_tool_ms.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 367 Jul 14 18:33 test_tool_ms_createmultims.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 2095 Jul 14 18:33 test_tool_ms_statwt.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 8633 Jul 14 18:33 test_tool_msmetadata.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 359 Jul 14 18:33 test_tool_msuvbinner.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 1171 Jul 14 18:33 test_tool_quanta.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 3977 Jul 14 18:33 test_tool_regionmanager.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 2072 Jul 14 18:33 test_tool_sdm.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 2096 Jul 14 18:33 test_tool_sdm_toms.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 670 Jul 14 18:33 test_tool_simulator.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 1716 Jul 14 18:33 test_tool_synthesisutils.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 1462 Jul 14 18:33 test_tool_table.xml |
| 14-Jul-2026 14:33:34 | -rw-r--r-- 1 casaci root 1717 Jul 14 18:33 test_tool_vpmanager.xml |
| 14-Jul-2026 14:33:34 | Finished task 'Test wheel' with result: Success |
| 14-Jul-2026 14:33:34 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
| 14-Jul-2026 14:33:34 | Parsing test results under /export/home/cbt-el7-6/bamboohome/xml-data/build-dir/CASASPECS-CI249-TTOML228... |
| 14-Jul-2026 14:33:34 | Finished task 'Parse tests' with result: Success |
| 14-Jul-2026 14:33:34 | Starting task 'Cleanup' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
| 14-Jul-2026 14:33:34 | Beginning to execute external process for build 'CASASPECS - CI Build - CAS-14763 - Test Tools Many Linux 2.28 #34 (CASASPECS-CI249-TTOML228-34)' ... running command line: /export/home/cbt-el7-6/bamboohome/temp/CASASPECS-CI249-TTOML228-34-ScriptBuildTask-8021083056713130194.sh ... in: /export/home/cbt-el7-6/bamboohome/xml-data/build-dir/CASASPECS-CI249-TTOML228 |
| 14-Jul-2026 14:33:34 | Starting cleanup |
| 14-Jul-2026 14:33:45 | wheel-container-test |
| 14-Jul-2026 14:33:46 | wheel-container-test |
| 14-Jul-2026 14:33:46 | Cleanup complete |
| 14-Jul-2026 14:33:46 | Finished task 'Cleanup' with result: Success |
| 14-Jul-2026 14:33:46 | Running post build plugin 'Docker Container Cleanup' |
| 14-Jul-2026 14:33:46 | Beginning to execute external process for build 'CASASPECS - CI Build - CAS-14763 - Test Tools Many Linux 2.28 #34 (CASASPECS-CI249-TTOML228-34)' ... running command line: /usr/bin/docker rm -f wheel-container-test ... in: /export/home/cbt-el7-6/bamboohome/xml-data/build-dir/CASASPECS-CI249-TTOML228 |
| 14-Jul-2026 14:33:46 | Error response from daemon: No such container: wheel-container-test |
| 14-Jul-2026 14:33:46 | Running post build plugin 'NCover Results Collector' |
| 14-Jul-2026 14:33:46 | Running post build plugin 'Build Results Label Collector' |
| 14-Jul-2026 14:33:46 | Running post build plugin 'Clover Results Collector' |
| 14-Jul-2026 14:33:46 | Running post build plugin 'npm Cache Cleanup' |
| 14-Jul-2026 14:33:46 | Running post build plugin 'Artifact Copier' |
| 14-Jul-2026 14:33:46 | Publishing an artifact: Tests |
| 14-Jul-2026 14:33:47 | Finished publishing of artifact Non required job artifact Http Compression On : [Tests], patterns: [*.xml] anchored at: [wheeldirectory/] in 343.1 ms |
| 14-Jul-2026 14:33:47 | Publishing an artifact: xml Directories |
| 14-Jul-2026 14:33:47 | Finished publishing of artifact Non required job artifact Http Compression On : [xml Directories], patterns: [**/*.xml] anchored at: [wheeldirectory/] in 139.2 ms |
| 14-Jul-2026 14:33:47 | Finalising the build... |
| 14-Jul-2026 14:33:47 | Stopping timer. |
| 14-Jul-2026 14:33:47 | Build CASASPECS-CI249-TTOML228-34 completed. |
| 14-Jul-2026 14:33:47 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
| 14-Jul-2026 14:33:47 | Running on server: post build plugin 'NCover Results Collector' |
| 14-Jul-2026 14:33:47 | Running on server: post build plugin 'Build Labeller' |
| 14-Jul-2026 14:33:47 | Running on server: post build plugin 'Clover Delta Calculator' |
| 14-Jul-2026 14:33:47 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
| 14-Jul-2026 14:33:47 | All post build plugins have finished |
| 14-Jul-2026 14:33:47 | Generating build results summary... |
| 14-Jul-2026 14:33:47 | Saving build results to disk... |
| 14-Jul-2026 14:33:47 | Store variable context... |
| 14-Jul-2026 14:33:47 | Finished building CASASPECS-CI249-TTOML228-34. |