Build: #5 was successful
Job: Test Tools Many Linux 2.28 was successful
Build log
The build generated 53,133 lines of output.The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
19-Dec-2024 15:55:19 | 2024-12-19 20:55:20 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
19-Dec-2024 15:55:19 | 2024-12-19 20:55:20 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.44269/3.26616/4.3519 |
19-Dec-2024 15:55:19 | 2024-12-19 20:55:20 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
19-Dec-2024 15:55:19 | 2024-12-19 20:55:20 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
19-Dec-2024 15:55:19 | 2024-12-19 20:55:20 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
19-Dec-2024 15:55:19 | 2024-12-19 20:55:20 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
19-Dec-2024 15:55:19 | 2024-12-19 20:55:20 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
19-Dec-2024 15:55:19 | 2024-12-19 20:55:20 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
19-Dec-2024 15:55:19 | 2024-12-19 20:55:20 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
19-Dec-2024 15:55:19 | 2024-12-19 20:55:20 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
19-Dec-2024 15:55:19 | 2024-12-19 20:55:20 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
19-Dec-2024 15:55:19 | 2024-12-19 20:55:20 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
19-Dec-2024 15:55:19 | 2024-12-19 20:55:20 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
19-Dec-2024 15:55:19 | 2024-12-19 20:55:20 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350681/0.587724/0.894558 |
19-Dec-2024 15:55:19 | 2024-12-19 20:55:20 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
19-Dec-2024 15:55:22 | 2024-12-19 20:55:22 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.296/59.0077/111.454 |
19-Dec-2024 15:55:22 | 2024-12-19 20:55:22 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
19-Dec-2024 15:55:22 | 2024-12-19 20:55:22 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.354236/0.581733/0.988903 |
19-Dec-2024 15:55:22 | 2024-12-19 20:55:22 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:24 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 17.2419/56.3249/117.264 |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:24 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:24 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:24 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:24 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:24 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:24 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:24 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:24 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:24 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:24 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:24 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:24 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0850169/0.113968/0.15276 |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:24 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.67561/5.33243/8.17296 |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0784236/0.114345/0.159908 |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.46392/5.27232/7.20673 |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
19-Dec-2024 15:55:24 | 2024-12-19 20:55:25 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0703936/0.102501/0.131676 |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.98728/4.47977/5.84264 |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0751114/0.102994/0.138529 |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:25 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:26 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.18629/4.47068/5.8941 |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:26 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:26 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:26 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:26 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:26 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:26 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:26 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:26 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:26 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:26 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:26 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:26 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350626/0.604424/0.974388 |
19-Dec-2024 15:55:25 | 2024-12-19 20:55:26 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
19-Dec-2024 15:55:27 | 2024-12-19 20:55:28 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.2542/59.3511/120.719 |
19-Dec-2024 15:55:27 | 2024-12-19 20:55:28 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
19-Dec-2024 15:55:27 | 2024-12-19 20:55:28 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.382806/0.598119/0.941571 |
19-Dec-2024 15:55:27 | 2024-12-19 20:55:28 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 20.0637/57.2112/118.101 |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0750931/0.0978998/0.125897 |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.72932/3.98787/5.33715 |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0658572/0.0972125/0.140794 |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:30 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:31 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.97943/3.97841/5.72903 |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:31 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:31 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:31 INFO Calibrater::solve Found good BPOLY solutions in 7 slots. |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:31 INFO calibrater::solve Finished solving. |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:31 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
19-Dec-2024 15:55:30 | test_tool_calibrater.py::calibrater_test::test_solveBandpass |
19-Dec-2024 15:55:30 | Check that solve band poly creates the output table |
19-Dec-2024 15:55:30 | PASSED |
19-Dec-2024 15:55:30 | |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:31 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:31 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:31 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
19-Dec-2024 15:55:30 | 2024-12-19 20:55:31 INFO Clearing all model records in MS header. |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO Calibrater:: Initializing nominal selection to the whole MS. |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO calibrater::setsolvegainspline Beginning setsolvegainspline--(MSSelection version)------- |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO Calibrater::setsolvegainspline Arranging to SOLVE: |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO Calibrater::setsolvegainspline . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO calibrater::solve Beginning solve----------------------------- |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO Calibrater::solve The following calibration terms are arranged for apply: |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO Calibrater::solve . (None) |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO Calibrater::solve The following calibration term is arranged for solve: |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO Calibrater::solve . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO GJonesSpline::solve() Fitting time-dependent cubic splines. |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO GJonesSpline::solve() Solving for phase splines with splinetime= 10800 |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO GJonesSpline::solve() Solving for amplitude splines with splinetime= 10800 |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO GJonesSpline::solve() Accumulating data for: field= 1331+30500002_0, spw= 0, nchan= 63 |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63 |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63 |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO GJonesSpline::solve() Number of timestamps in data = 60 |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec. |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO GJonesSpline::solve() Number of cubic spline control points = 4 |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO GJonesSpline::solve() Number of cubic spline knots = 8 |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO GJonesSpline::solve() Number of cubic spline segments = 1 |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO GJonesSpline::solve() Fitting amplitude spline. |
19-Dec-2024 15:55:31 | test_tool_calibrater.py::calibrater_test::test_solveGainspline DPBTRF ;problem leading minor 23 |
19-Dec-2024 15:55:31 | DPBTRF ;problem leading minor 23 |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:31 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline. |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:32 INFO GJonesSpline::solve() Fitting phase spline. |
19-Dec-2024 15:55:31 | DPBTRF ;problem leading minor 22 |
19-Dec-2024 15:55:31 | DPBTRF ;problem leading minor 22 |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:32 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:32 INFO calibrater::solve Finished solving. |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:32 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
19-Dec-2024 15:55:31 | |
19-Dec-2024 15:55:31 | Check that solve gain spline creates the output table |
19-Dec-2024 15:55:31 | PASSED |
19-Dec-2024 15:55:31 | |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:32 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:32 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:32 INFO Clearing all model records in MS header. |
19-Dec-2024 15:55:31 | 2024-12-19 20:55:32 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
19-Dec-2024 15:55:33 | 2024-12-19 20:55:33 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
19-Dec-2024 15:55:33 | 2024-12-19 20:55:33 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
19-Dec-2024 15:55:33 | 2024-12-19 20:55:33 INFO Calibrater:: Initializing nominal selection to the whole MS. |
19-Dec-2024 15:55:33 | 2024-12-19 20:55:33 INFO calibrater::specifycal Beginning specifycal----------------------- |
19-Dec-2024 15:55:33 | 2024-12-19 20:55:33 INFO Creating G Jones table from specified parameters. |
19-Dec-2024 15:55:33 | 2024-12-19 20:55:33 INFO Generating 'G' corrections. |
19-Dec-2024 15:55:33 | 2024-12-19 20:55:33 INFO Specified parameter(s) (per spw and pol) repeated on all antennas. |
19-Dec-2024 15:55:33 | 2024-12-19 20:55:33 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations. |
19-Dec-2024 15:55:33 | 2024-12-19 20:55:33 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9]) |
19-Dec-2024 15:55:33 | 2024-12-19 20:55:33 INFO Writing solutions to table: testcalout.cal |
19-Dec-2024 15:55:33 | 2024-12-19 20:55:34 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
19-Dec-2024 15:55:33 | test_tool_calibrater.py::calibrater_test::test_specifyCal |
19-Dec-2024 15:55:33 | Check that specifycal can set values for specific spws and antennas |
19-Dec-2024 15:55:33 | PASSED |
19-Dec-2024 15:55:33 | |
19-Dec-2024 15:55:33 | 2024-12-19 20:55:34 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
19-Dec-2024 15:55:33 | 2024-12-19 20:55:34 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
19-Dec-2024 15:55:33 | 2024-12-19 20:55:34 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
19-Dec-2024 15:55:33 | 2024-12-19 20:55:34 INFO Clearing all model records in MS header. |
19-Dec-2024 15:55:33 | 2024-12-19 20:55:34 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:35 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:35 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:35 INFO Calibrater:: Initializing nominal selection to the whole MS. |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:36 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:36 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:36 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:36 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:36 INFO Calibrater::setsolve Arranging to SOLVE: |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:36 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:36 INFO Calibrater::state The following calibration terms are arranged for apply: |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:36 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:36 INFO Calibrater::state The following calibration term is arranged for solve: |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:36 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:36 INFO calibrater::solve Beginning solve----------------------------- |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:36 INFO Calibrater::solve The following calibration terms are arranged for apply: |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:36 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:36 INFO Calibrater::solve The following calibration term is arranged for solve: |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:36 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:36 INFO Solving for Mf Mueller |
19-Dec-2024 15:55:35 | 2024-12-19 20:55:36 INFO For solint = inf, found 84 solution intervals. |
19-Dec-2024 15:55:37 | 2024-12-19 20:55:37 INFO Found good Mf Mueller solutions in 84 intervals. |
19-Dec-2024 15:55:37 | 2024-12-19 20:55:37 INFO Writing solutions to table: output.ms |
19-Dec-2024 15:55:37 | 2024-12-19 20:55:37 INFO calibrater::solve Finished solving. |
19-Dec-2024 15:55:37 | 2024-12-19 20:55:37 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
19-Dec-2024 15:55:37 | test_tool_calibrater.py::calibrater_test::test_standardPath |
19-Dec-2024 15:55:37 | open setapply setsolve state solve close |
19-Dec-2024 15:55:37 | PASSED |
19-Dec-2024 15:55:37 | |
19-Dec-2024 15:55:37 | 2024-12-19 20:55:38 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
19-Dec-2024 15:55:37 | 2024-12-19 20:55:38 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
19-Dec-2024 15:55:37 | 2024-12-19 20:55:38 INFO Clearing all model records in MS header. |
19-Dec-2024 15:55:37 | 2024-12-19 20:55:38 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
19-Dec-2024 15:55:38 | 2024-12-19 20:55:39 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO Calibrater:: Initializing nominal selection to the whole MS. |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO name:: No table opened. |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: The Table Cache has the following 16 entries: |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO name:: No table opened. |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:39 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
19-Dec-2024 15:55:39 | test_tool_calibrater.py::calibrater_test::test_takesMs |
19-Dec-2024 15:55:39 | Check that the calibrater tool can open and close an MS |
19-Dec-2024 15:55:39 | PASSED |
19-Dec-2024 15:55:39 | |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:40 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:40 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:40 INFO Clearing all model records in MS header. |
19-Dec-2024 15:55:39 | 2024-12-19 20:55:40 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
19-Dec-2024 15:55:40 | 2024-12-19 20:55:41 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
19-Dec-2024 15:55:41 | 2024-12-19 20:55:41 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
19-Dec-2024 15:55:41 | 2024-12-19 20:55:41 INFO Calibrater:: Initializing nominal selection to the whole MS. |
19-Dec-2024 15:55:41 | 2024-12-19 20:55:41 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
19-Dec-2024 15:55:41 | 2024-12-19 20:55:41 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
19-Dec-2024 15:55:41 | 2024-12-19 20:55:41 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
19-Dec-2024 15:55:41 | 2024-12-19 20:55:41 INFO calibrater::correct Beginning correct--------------------------- |
19-Dec-2024 15:55:41 | 2024-12-19 20:55:41 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
19-Dec-2024 15:55:41 | 2024-12-19 20:55:41 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
19-Dec-2024 15:55:43 | 2024-12-19 20:55:44 INFO calibrater::correct Finished correcting. |
19-Dec-2024 15:55:43 | 2024-12-19 20:55:44 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
19-Dec-2024 15:55:43 | test_tool_calibrater.py::calibrater_test::test_writeToCorrected |
19-Dec-2024 15:55:43 | Check that the tool writes to the CORRECTED_DATA column |
19-Dec-2024 15:55:43 | PASSED |
19-Dec-2024 15:55:43 | |
19-Dec-2024 15:55:43 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml - |
19-Dec-2024 15:55:43 | =================== 24 passed, 1 warning in 95.69s (0:01:35) =================== |
19-Dec-2024 15:55:44 | ============================= test session starts ============================== |
19-Dec-2024 15:55:44 | platform linux -- Python 3.8.7, pytest-8.3.4, pluggy-1.5.0 -- /home/casatest/venv/bin/python3.8 |
19-Dec-2024 15:55:44 | cachedir: .pytest_cache |
19-Dec-2024 15:55:44 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics |
19-Dec-2024 15:55:44 | configfile: pytest.ini |
19-Dec-2024 15:55:44 | collecting ... collected 11 items |
19-Dec-2024 15:55:44 | |
19-Dec-2024 15:55:44 | |
19-Dec-2024 15:55:44 | 2024-12-19 20:55:45 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:55:44 | 2024-12-19 20:55:45 INFO name:: No table opened. |
19-Dec-2024 15:55:44 | 2024-12-19 20:55:45 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:55:44 | test_tool_image_statistics.py::ia_statistics_test::test_CAS_2195_image_can_have_linear_rather_than_direction_coordinate |
19-Dec-2024 15:55:44 | verify fix for CAS-2195, image has linear, not direction, coordinate |
19-Dec-2024 15:55:44 | PASSED |
19-Dec-2024 15:55:44 | |
19-Dec-2024 15:55:59 | 2024-12-19 20:55:59 INFO name:: No table opened. |
19-Dec-2024 15:55:59 | 2024-12-19 20:55:59 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:55:59 | test_tool_image_statistics.py::ia_statistics_test::test_biweight |
19-Dec-2024 15:55:59 | Test biweight algorithm CAS-11100 |
19-Dec-2024 15:55:59 | PASSED |
19-Dec-2024 15:55:59 | |
19-Dec-2024 15:55:59 | 2024-12-19 20:55:59 INFO ImageFactory::createImage Created Paged image 'chauvtest.im' of shape [107] with float valued pixels. |
19-Dec-2024 15:55:59 | 2024-12-19 20:55:59 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
19-Dec-2024 15:55:59 | 2024-12-19 20:55:59 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
19-Dec-2024 15:55:59 | 2024-12-19 20:55:59 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
19-Dec-2024 15:55:59 | 2024-12-19 20:55:59 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
19-Dec-2024 15:55:59 | 2024-12-19 20:55:59 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
19-Dec-2024 15:55:59 | 2024-12-19 20:55:59 INFO name:: No table opened. |
19-Dec-2024 15:55:59 | 2024-12-19 20:55:59 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:55:59 | test_tool_image_statistics.py::ia_statistics_test::test_chauvenet |
19-Dec-2024 15:55:59 | Test Chauvenet's criterion algorithm |
19-Dec-2024 15:55:59 | PASSED |
19-Dec-2024 15:55:59 | |
19-Dec-2024 15:55:59 | 2024-12-19 20:55:59 INFO ImageFactory::createImage Created Paged image 'fhtest.im' of shape [100] with float valued pixels. |
19-Dec-2024 15:55:59 | 2024-12-19 20:55:59 INFO name:: No table opened. |
19-Dec-2024 15:55:59 | 2024-12-19 20:55:59 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:55:59 | test_tool_image_statistics.py::ia_statistics_test::test_fithalf |
19-Dec-2024 15:55:59 | Test fit to half algorithm |
19-Dec-2024 15:55:59 | PASSED |
19-Dec-2024 15:55:59 | |
19-Dec-2024 15:55:59 | 2024-12-19 20:55:59 INFO ImageFactory::createImage Created Paged image 'hftest.im' of shape [100] with float valued pixels. |
19-Dec-2024 15:55:59 | 2024-12-19 20:55:59 INFO name:: No table opened. |
19-Dec-2024 15:55:59 | 2024-12-19 20:55:59 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:55:59 | test_tool_image_statistics.py::ia_statistics_test::test_hingesfences |
19-Dec-2024 15:55:59 | Test hinges-fences algorithm |
19-Dec-2024 15:55:59 | PASSED |
19-Dec-2024 15:55:59 | |
19-Dec-2024 15:55:59 | 2024-12-19 20:55:59 INFO ImageFactory::createImage Created Paged image 'internally_excluded_region.im' of shape [100, 200, 110, 4] with float valued pixels. |
19-Dec-2024 15:55:59 | 2024-12-19 20:56:00 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
19-Dec-2024 15:55:59 | 2024-12-19 20:56:00 INFO CasacRegionManager::fromBCS Using channel range(s) |
19-Dec-2024 15:55:59 | 2024-12-19 20:56:00 INFO CasacRegionManager::fromBCS Using polarizations IV |
19-Dec-2024 15:55:59 | 2024-12-19 20:56:00 WARN Stokes cannot be determined because this region type is not handled yet. But chances are very good this is no need to be alarmed. |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO name:: No table opened. |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:56:00 | test_tool_image_statistics.py::ia_statistics_test::test_internal_region_exclusion |
19-Dec-2024 15:56:00 | Verify data not returned for internally excluded regions |
19-Dec-2024 15:56:00 | PASSED |
19-Dec-2024 15:56:00 | |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO name:: No table opened. |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:56:00 | test_tool_image_statistics.py::ia_statistics_test::test_logfile_param |
19-Dec-2024 15:56:00 | test logfile |
19-Dec-2024 15:56:00 | i 1 |
19-Dec-2024 15:56:00 | i 2 |
19-Dec-2024 15:56:00 | PASSED |
19-Dec-2024 15:56:00 | |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Image name : moment_map.im |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Object name : G11.92 |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Image type : PagedImage |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Image quantity : Intensity |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Pixel mask(s) : mask0 |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Region(s) : None |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Image units : Jy/beam.km/s |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Restoring Beam : 3.15627 arcsec, 1.80243 arcsec, 58.3141 deg |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Direction reference : J2000 |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Spectral reference : LSRK |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Velocity type : RADIO |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Rest frequency : 2.30538e+11 Hz |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Pointing center : 18:13:58.097081 -18.54.16.695951 |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Telescope : SMA |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Observer : SMA |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Date observation : 2008/06/23/00:00:00.000000 |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Axis Coord Type Name Proj Shape Tile Coord value at pixel Coord incr Units |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ -------------------------------------------------------------------------------------------------- |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ 0 0 Direction Right Ascension SIN 256 256 18:13:58.097 128.00 -4.000000e-01 arcsec |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ 1 0 Direction Declination SIN 256 256 -18.54.16.696 128.00 4.000000e-01 arcsec |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ 2 1 Stokes Stokes 1 1 I |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ 3 2 Spectral Frequency 1 1 2.30392e+11 -37.00 2.536257562e+06 Hz |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageMetaData::summary+ Velocity 189.963 -37.00 -3.298159e+00 km/s |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO name:: No table opened. |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:56:00 | test_tool_image_statistics.py::ia_statistics_test::test_moment_map_flux |
19-Dec-2024 15:56:00 | Test 1: verify moment maps can have flux densities computed in statistics |
19-Dec-2024 15:56:00 | PASSED |
19-Dec-2024 15:56:00 | |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageFactory::createImage Created Paged image 'test011.im' of shape [10, 10, 10] with float valued pixels. |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO CasacRegionManager::fromBCS Using specified box(es) 0, 0, 2, 2, 4, 4, 6, 6 |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO name:: No table opened. |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:56:00 | test_tool_image_statistics.py::ia_statistics_test::test_multiple_region_support |
19-Dec-2024 15:56:00 | test multiple region support |
19-Dec-2024 15:56:00 | PASSED |
19-Dec-2024 15:56:00 | |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO name:: No table opened. |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:56:00 | test_tool_image_statistics.py::ia_statistics_test::test_specifying_axes_param |
19-Dec-2024 15:56:00 | choose axes works |
19-Dec-2024 15:56:00 | PASSED |
19-Dec-2024 15:56:00 | |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageFactory::createImage Created Paged image 'maskim' of shape [200, 200, 1, 1] with float valued pixels. |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO ImageFactory::createImage Created Paged image 'tmp.im' of shape [200, 200, 1, 20] with float valued pixels. |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 SEVERE image::statistics (file src/tools/image/image_cmpt.cc, line 5995) Exception Reported: The input image shape ([200, 200, 1, 20]) and mask shape ([200, 200, 1, 1]) are different, and it was specified that the mask should not be extended, so the mask cannot be applied to the (sub)image. Specifying that the mask should be extended may resolve the issue at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 306 |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO name:: No table opened. |
19-Dec-2024 15:56:00 | 2024-12-19 20:56:00 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:56:00 | test_tool_image_statistics.py::ia_statistics_test::test_stretch |
19-Dec-2024 15:56:00 | Test stretch parameter |
19-Dec-2024 15:56:00 | PASSED |
19-Dec-2024 15:56:00 | |
19-Dec-2024 15:56:00 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_statistics/nose.xml - |
19-Dec-2024 15:56:00 | ======================== 11 passed, 1 warning in 16.37s ======================== |
19-Dec-2024 15:56:00 | ============================= test session starts ============================== |
19-Dec-2024 15:56:00 | platform linux -- Python 3.8.7, pytest-8.3.4, pluggy-1.5.0 -- /home/casatest/venv/bin/python3.8 |
19-Dec-2024 15:56:00 | cachedir: .pytest_cache |
19-Dec-2024 15:56:00 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims |
19-Dec-2024 15:56:00 | configfile: pytest.ini |
19-Dec-2024 15:56:01 | collecting ... collected 1 item |
19-Dec-2024 15:56:01 | |
19-Dec-2024 15:56:01 | |
19-Dec-2024 15:56:01 | 2024-12-19 20:56:02 INFO ms::createmultims Copying subtables from part1.ms to the other MMS members. |
19-Dec-2024 15:56:07 | 2024-12-19 20:56:08 INFO name:: No table opened. |
19-Dec-2024 15:56:07 | 2024-12-19 20:56:08 INFO name:: No table opened. |
19-Dec-2024 15:56:07 | test_tool_ms_createmultims.py::test_createmultims::test1 |
19-Dec-2024 15:56:07 | Test_createmultims 1: 4 parts, same sources but different spws |
19-Dec-2024 15:56:07 | Copying part1.ms |
19-Dec-2024 15:56:07 | Copying part2-mod.ms |
19-Dec-2024 15:56:07 | Copying part2-mod2.ms |
19-Dec-2024 15:56:07 | Copying part2.ms |
19-Dec-2024 15:56:07 | Copying part3.ms |
19-Dec-2024 15:56:07 | Copying part4.ms |
19-Dec-2024 15:56:07 | PASSED |
19-Dec-2024 15:56:07 | |
19-Dec-2024 15:56:07 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_createmultims/nose.xml - |
19-Dec-2024 15:56:07 | ========================= 1 passed, 1 warning in 6.98s ========================= |
19-Dec-2024 15:56:08 | ============================= test session starts ============================== |
19-Dec-2024 15:56:08 | platform linux -- Python 3.8.7, pytest-8.3.4, pluggy-1.5.0 -- /home/casatest/venv/bin/python3.8 |
19-Dec-2024 15:56:08 | cachedir: .pytest_cache |
19-Dec-2024 15:56:08 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol |
19-Dec-2024 15:56:08 | configfile: pytest.ini |
19-Dec-2024 15:56:08 | collecting ... collected 17 items |
19-Dec-2024 15:56:08 | |
19-Dec-2024 15:56:08 | |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO imagepol::complexFractionalLinearPolarization(...) Creating image 'g' of shape [10, 10, 10, 1] |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO imagepol::complexFractionalLinearPolarization(...) Creating image 'hh' of shape [10, 10, 10, 1] |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 SEVERE imagepol::complexfraclinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 SEVERE imagepol::complexfraclinpol+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
19-Dec-2024 15:56:08 | test_tool_imagepol.py::po_complexfraclinpol_test::test_multibeam |
19-Dec-2024 15:56:08 | Test multibeam images for correct behavior |
19-Dec-2024 15:56:08 | pol_eq_beams.fits |
19-Dec-2024 15:56:08 | PASSED |
19-Dec-2024 15:56:08 | |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImagePolProxy::complexlinpol Creating image 'g' of shape [10, 10, 10, 1] |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImagePolProxy::complexlinpol Creating image 'hh' of shape [10, 10, 10, 1] |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 SEVERE imagepol::complexlinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 SEVERE imagepol::complexlinpol+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO name:: No table opened. |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:56:08 | test_tool_imagepol.py::po_complexlinpol_test::test_multibeam |
19-Dec-2024 15:56:08 | Test multibeam images for correct behavior |
19-Dec-2024 15:56:08 | PASSED |
19-Dec-2024 15:56:08 | |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 SEVERE imagepol::depolratio Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 SEVERE imagepol::depolratio+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 SEVERE imagepol::depolratio Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 SEVERE imagepol::depolratio+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
19-Dec-2024 15:56:08 | test_tool_imagepol.py::po_depolratio_test::test_multibeam |
19-Dec-2024 15:56:08 | Test multibeam images for correct behavior |
19-Dec-2024 15:56:08 | pol_eq_beams.fits |
19-Dec-2024 15:56:08 | PASSED |
19-Dec-2024 15:56:08 | |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 SEVERE imagepol::fourierrotationmeasure Exception Reported: 2024-12-19 20:56:09 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 SEVERE imagepol::fourierrotationmeasure Exception Reported: 2024-12-19 20:56:09 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
19-Dec-2024 15:56:08 | test_tool_imagepol.py::po_fourierrotationmeasure_test::test_multibeam |
19-Dec-2024 15:56:08 | Test multibeam images for correct behavior |
19-Dec-2024 15:56:08 | pol_eq_beams.fits |
19-Dec-2024 15:56:08 | PASSED |
19-Dec-2024 15:56:08 | |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImagePolarimetry::fracLinPol Debiasing with sigma = 1.0119 |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | test_tool_imagepol.py::po_fraclinpol_test::test_multibeam |
19-Dec-2024 15:56:08 | Test multibeam images for correct behavior |
19-Dec-2024 15:56:08 | pol_eq_beams.fits |
19-Dec-2024 15:56:08 | PASSED |
19-Dec-2024 15:56:08 | |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImagePolarimetry::fracTotPol Debiasing with sigma = 1.0119 |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | test_tool_imagepol.py::po_fractotpol_test::test_multibeam |
19-Dec-2024 15:56:08 | Test multibeam images for correct behavior |
19-Dec-2024 15:56:08 | pol_eq_beams.fits |
19-Dec-2024 15:56:08 | PASSED |
19-Dec-2024 15:56:08 | |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImagePolTask::_sigma Determined noise from V image to be 1.0119 |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImagePolTask::_sigma Debiasing with sigma = 1.0119 |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | test_tool_imagepol.py::po_linpolint_test::test_multibeam |
19-Dec-2024 15:56:08 | Test multibeam images for correct behavior |
19-Dec-2024 15:56:08 | pol_eq_beams.fits |
19-Dec-2024 15:56:08 | PASSED |
19-Dec-2024 15:56:08 | |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 WARN LinearPolarizationAngleCalculator::compute (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/LinearPolarizationAngleCalculator.cc, line 40) The input image has multiple beams. Because these beams can vary with stokes/polarization, they will not be copied to the output image |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO SubImageFactory::createImage Creating image 'g' of shape [10, 10, 10, 1] |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 SEVERE imagepol::linpolposang Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 SEVERE imagepol::linpolposang+ ... thrown by casacore::Bool casa::ImagePolTask::_checkBeams(const std::vector<casa::ImagePolTask::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolTask.cc, line: 79 |
19-Dec-2024 15:56:08 | test_tool_imagepol.py::po_linpolposang_test::test_multibeam |
19-Dec-2024 15:56:08 | Test multibeam images for correct behavior |
19-Dec-2024 15:56:08 | pol_eq_beams.fits |
19-Dec-2024 15:56:08 | PASSED |
19-Dec-2024 15:56:08 | |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageFactory::createImage Created Paged image 'rm_input.im' of shape [20, 20, 4, 20] with float valued pixels. |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImagePol::rotationMeasure Creating image 'rm.im' of shape [20, 20] |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImagePol::rotationMeasure Creating image 'pa0.im' of shape [20, 20, 1] |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO image::statistics Determining stats for image rm.im |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageRegion::fromRecord+ [0, 0] to [19, 19] (00:00:40.000, -00.10.00.001 to 23:59:24.000, +00.09.00.001) |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::_logStartup Statistics calculated using Classic algorithm |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::_logStartup Regions --- |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (pixel) [blc]: [0, 0] |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::_logStartup -- top-right corner (pixel) [trc]: [19, 19] |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (world) [blcf]: 00:00:40.000, -00.10.00.001 |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::_logStartup -- top-right corner (world) [trcf]: 23:59:24.000, +00.09.00.001 |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO Values --- |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO -- number of points [npts]: 400 |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO -- maximum value [max]: 9.60001 rad/m/m |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO -- minimum value [min]: 9.59997 rad/m/m |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO -- position of max value (pixel) [maxpos]: [3, 0] |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO -- position of min value (pixel) [minpos]: [1, 0] |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO -- position of max value (world) [maxposf]: 00:00:28.000, -00.10.00.001 |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO -- position of min value (world) [minposf]: 00:00:36.000, -00.10.00.001 |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO -- Sum of pixel values [sum]: 3839.99 rad/m/m |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO -- Sum of squared pixel values [sumsq]: 36863.9 rad/m/m.rad/m/m |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO Statistics --- |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO -- Mean of the pixel values [mean]: 9.59998 rad/m/m |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO -- Variance of the pixel values : 9.48741e-11 rad/m/m |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO -- Standard deviation of the Mean [sigma]: 9.74033e-06 rad/m/m |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO -- Root mean square [rms]: 9.59998 rad/m/m |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::statistics Sum column unit = rad/m/m |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::statistics+ Mean column unit = rad/m/m |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::statistics+ Std_dev column unit = rad/m/m |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::statistics+ Minimum column unit = rad/m/m |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::statistics+ Maximum column unit = rad/m/m |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::statistics Npts Sum Mean Rms Std_dev Minimum Maximum |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::statistics 4.000000e+02 3.839993e+03 9.599982e+00 9.599982e+00 9.740334e-06 9.599969e+00 9.600007e+00 |
19-Dec-2024 15:56:08 | 2024-12-19 20:56:09 INFO deleted table /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/rm.im |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO image::statistics Determining stats for image pa0.im |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO CasacRegionManager::fromBCS Using polarizations ALL |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageRegion::fromRecord+ [0, 0, 0] to [19, 19, 0] (00:00:40.000, -00.10.00.001, Pangle to 23:59:24.000, +00.09.00.001, Pangle) |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::_logStartup Statistics calculated using Classic algorithm |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::_logStartup Regions --- |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (pixel) [blc]: [0, 0, 0] |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::_logStartup -- top-right corner (pixel) [trc]: [19, 19, 0] |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (world) [blcf]: 00:00:40.000, -00.10.00.001, Pangle |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::_logStartup -- top-right corner (world) [trcf]: 23:59:24.000, +00.09.00.001, Pangle |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO Values --- |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO -- number of points [npts]: 400 |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO -- maximum value [max]: 22.5001 deg |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO -- minimum value [min]: 22.5 deg |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO -- position of max value (pixel) [maxpos]: [1, 0, 0] |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO -- position of min value (pixel) [minpos]: [3, 0, 0] |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO -- position of max value (world) [maxposf]: 00:00:36.000, -00.10.00.001, Pangle |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO -- position of min value (world) [minposf]: 00:00:28.000, -00.10.00.001, Pangle |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO -- Sum of pixel values [sum]: 9000.02 deg |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO -- Sum of squared pixel values [sumsq]: 202501 deg.deg |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO Statistics --- |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO -- Mean of the pixel values [mean]: 22.5 deg |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO -- Variance of the pixel values : 6.26899e-10 deg |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO -- Standard deviation of the Mean [sigma]: 2.5038e-05 deg |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO -- Root mean square [rms]: 22.5 deg |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::statistics Sum column unit = deg |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::statistics+ Mean column unit = deg |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::statistics+ Std_dev column unit = deg |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::statistics+ Minimum column unit = deg |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::statistics+ Maximum column unit = deg |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::statistics Npts Sum Mean Rms Std_dev Minimum Maximum |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageStatsCalculator::statistics 4.000000e+02 9.000018e+03 2.250005e+01 2.250005e+01 2.503796e-05 2.249998e+01 2.250008e+01 |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO deleted table /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/pa0.im |
19-Dec-2024 15:56:09 | test_tool_imagepol.py::po_rotationmeasure_test::test_algorithm |
19-Dec-2024 15:56:09 | Test rotation measure computation algorithm |
19-Dec-2024 15:56:09 | PASSED |
19-Dec-2024 15:56:09 | |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImagePol::rotationMeasure Creating image 'g' of shape [10, 10] |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImagePol::rotationMeasure Creating image 'hh' of shape [10, 10] |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 SEVERE imagepol::rotationmeasure Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 SEVERE imagepol::rotationmeasure+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
19-Dec-2024 15:56:09 | test_tool_imagepol.py::po_rotationmeasure_test::test_multibeam |
19-Dec-2024 15:56:09 | Test multibeam images for correct behavior |
19-Dec-2024 15:56:09 | PASSED |
19-Dec-2024 15:56:09 | |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
19-Dec-2024 15:56:09 | test_tool_imagepol.py::po_sigma_test::test_multibeam |
19-Dec-2024 15:56:09 | Test multibeam images for correct behavior |
19-Dec-2024 15:56:09 | pol_eq_beams.fits |
19-Dec-2024 15:56:09 | PASSED |
19-Dec-2024 15:56:09 | |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 SEVERE imagepol::sigmadepolratio Exception Reported: Exception: Beams or beamsets are not equal between the two images, caonnot perform calculation. |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 SEVERE imagepol::sigmadepolratio+ ... thrown by static void casa::ImagePolarimetry::_checkBeams(const casa::ImagePolarimetry&, const casa::ImagePolarimetry&, const casacore::Vector<casa::ImagePolarimetry::StokesTypes>&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1686 |
19-Dec-2024 15:56:09 | test_tool_imagepol.py::po_sigmadepolratio_test::test_multibeam |
19-Dec-2024 15:56:09 | Test multibeam images for correct behavior |
19-Dec-2024 15:56:09 | PASSED |
19-Dec-2024 15:56:09 | |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO imagepol::sigmaFracLinPol Creating image 'g' of shape [10, 10, 10, 1] |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 SEVERE imagepol::sigmafraclinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 SEVERE imagepol::sigmafraclinpol+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
19-Dec-2024 15:56:09 | test_tool_imagepol.py::po_sigmafraclinpol_test::test_multibeam |
19-Dec-2024 15:56:09 | Test multibeam images for correct behavior |
19-Dec-2024 15:56:09 | PASSED |
19-Dec-2024 15:56:09 | |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO imagepol::sigmaFracTotPol Creating image 'g' of shape [10, 10, 10, 1] |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 WARN ImagePolarimetry::_setDoLinDoCirc (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line 272) I, Q, and U beams are not the same, cannot do linear portion |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 WARN ImagePolarimetry::_setDoLinDoCirc (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line 272) I and V beams are not the same, cannot do circular portion |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 SEVERE imagepol::sigmafractotpol Exception Reported: Exception: Can do neither linear nor circular portions. |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 SEVERE imagepol::sigmafractotpol+ ... thrown by void casa::ImagePolarimetry::_setDoLinDoCirc(casacore::Bool&, casacore::Bool&) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 292 |
19-Dec-2024 15:56:09 | test_tool_imagepol.py::po_sigmafractotpol_test::test_multibeam |
19-Dec-2024 15:56:09 | Test multibeam images for correct behavior |
19-Dec-2024 15:56:09 | PASSED |
19-Dec-2024 15:56:09 | |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 SEVERE imagepol::sigmalinpolint Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 SEVERE imagepol::sigmalinpolint+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
19-Dec-2024 15:56:09 | test_tool_imagepol.py::po_sigmalinpolint_test::test_multibeam |
19-Dec-2024 15:56:09 | Test multibeam images for correct behavior |
19-Dec-2024 15:56:09 | PASSED |
19-Dec-2024 15:56:09 | |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO imagepol::sigmaLinPolPosAng Creating image 'g' of shape [10, 10, 10, 1] |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 SEVERE imagepol::sigmalinpolposang Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 SEVERE imagepol::sigmalinpolposang+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
19-Dec-2024 15:56:09 | test_tool_imagepol.py::po_sigmalinpolposang_test::test_multibeam |
19-Dec-2024 15:56:09 | Test multibeam images for correct behavior |
19-Dec-2024 15:56:09 | PASSED |
19-Dec-2024 15:56:09 | |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImagePolTask::_sigma Determined noise from V image to be 1.0119 |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImagePolTask::_sigma Debiasing with sigma = 1.0119 |
19-Dec-2024 15:56:09 | 2024-12-19 20:56:09 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
19-Dec-2024 15:56:09 | test_tool_imagepol.py::po_totpolint_test::test_multibeam |
19-Dec-2024 15:56:09 | Test multibeam images for correct behavior |
19-Dec-2024 15:56:09 | PASSED |
19-Dec-2024 15:56:09 | |
19-Dec-2024 15:56:09 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml - |
19-Dec-2024 15:56:09 | ======================== 17 passed, 1 warning in 1.38s ========================= |
19-Dec-2024 15:56:09 | ============================= test session starts ============================== |
19-Dec-2024 15:56:09 | platform linux -- Python 3.8.7, pytest-8.3.4, pluggy-1.5.0 -- /home/casatest/venv/bin/python3.8 |
19-Dec-2024 15:56:09 | cachedir: .pytest_cache |
19-Dec-2024 15:56:09 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor |
19-Dec-2024 15:56:09 | configfile: pytest.ini |
19-Dec-2024 15:56:10 | collecting ... collected 9 items |
19-Dec-2024 15:56:10 | |
19-Dec-2024 15:56:10 | |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO CasacRegionManager::fromBCS Using all spectral channels. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO CasacRegionManager::fromBCS Using polarizations ALL |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 4, 1] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, Q) |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 4, 1] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, Q) |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [113, 76, 5, 2] |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 0, 0] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, I) |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO CasacRegionManager::fromBCS Using all spectral channels. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO CasacRegionManager::fromBCS Using polarizations ALL |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 4, 1] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, Q) |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 4, 1] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, Q) |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [113, 76, 5, 2] |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO name:: No table opened. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:56:10 | test_tool_image_pbcor.py::ia_pbcor_test::test_4d_image_with_2d_pb |
19-Dec-2024 15:56:10 | ia.pbcor: Test full image divide with cutoff. Primary beam is 2 D, image is 4 D |
19-Dec-2024 15:56:10 | PASSED |
19-Dec-2024 15:56:10 | |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:10 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [5, 5, 1, 1] |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO name:: No table opened. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:56:10 | test_tool_image_pbcor.py::ia_pbcor_test::test_diff_spectral_coordinate |
19-Dec-2024 15:56:10 | Verify fix that a different spectral coordinates in target and template don't matter, CAS-5096 |
19-Dec-2024 15:56:10 | PASSED |
19-Dec-2024 15:56:10 | |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageFactory::createImage Created Paged image 't_in.im' of shape [20, 20, 4, 20] with float valued pixels. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageFactory::createImage Created Paged image 't_pb_in.im' of shape [20, 20, 4, 20] with float valued pixels. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO CasacRegionManager::fromBCS Using all spectral channels. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO CasacRegionManager::fromBCS Using polarizations I |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [19, 19, 0, 19] (00:00:40.000, -00.10.00.001, I, 1.41499e+09Hz to 23:59:24.000, +00.09.00.001, I, 1.41501e+09Hz) |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [19, 19, 0, 19] (00:00:40.000, -00.10.00.001, I, 1.41499e+09Hz to 23:59:24.000, +00.09.00.001, I, 1.41501e+09Hz) |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO SubImageFactory::createImage Creating image 't_out.im' of shape [20, 20, 1, 20] |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO name:: No table opened. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:56:10 | test_tool_image_pbcor.py::ia_pbcor_test::test_empty_region_and_stokes |
19-Dec-2024 15:56:10 | Test specifying stokes with empty region works (CAS-11708) |
19-Dec-2024 15:56:10 | PASSED |
19-Dec-2024 15:56:10 | |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 SEVERE image::open (file src/tools/image/image_cmpt.cc, line 4208) Exception Reported: Exception: File name is empty. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 SEVERE image::open (file src/tools/image/image_cmpt.cc, line 4208)+ ... thrown by static void casa::ImageFactory::_checkInfile(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 371 |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 SEVERE image::open (file src/tools/image/image_cmpt.cc, line 4208) Exception Reported: Exception: File totally_bogus does not exist.. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 SEVERE image::open (file src/tools/image/image_cmpt.cc, line 4208)+ ... thrown by static void casa::ImageFactory::_checkInfile(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 375 |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289) Exception Reported: Exception: The image filename is empty. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289)+ ... thrown by static void casacore::ImageUtilities::openImage(casacore::ImageInterface<T>*&, const casacore::String&) [with T = float] at File: /source/casainstall/include/casacore/images/Images/ImageUtilities2.tcc, line: 255 |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289) Exception Reported: Exception: File 'totally_bogus2' does not exist. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289)+ ... thrown by static void casacore::ImageUtilities::openImage(casacore::ImageInterface<T>*&, const casacore::String&) [with T = float] at File: /source/casainstall/include/casacore/images/Images/ImageUtilities2.tcc, line: 260 |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 SEVERE ImageInputProcessor::_process Requested output image /bogusplace/bogusimage cannot be created so will not be written |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289) Exception Reported: 2024-12-19 20:56:11 SEVERE ImageInputProcessor::_process Requested output image /bogusplace/bogusimage cannot be created so will not be written |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 WARN /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/pbtest1_im.fits is not a valid or readable table |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 SEVERE Cannot read image /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/pbtest1_im.fits to get region bogus_region |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289) Exception Reported: Unable to open region file or region table description bogus_region in image /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/pbtest1_im.fits at File: /source/casa6/casatools/src/code/imageanalysis/Regions/CasacRegionManager.cc, line: 486 |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289) Exception Reported: Unknown mode zz |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289) Exception Reported: Coordinate systems of image and template are different: The DirectionCoordinates have differing LinearXform components at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePrimaryBeamCorrector.cc, line: 141 |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO name:: No table opened. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:56:10 | test_tool_image_pbcor.py::ia_pbcor_test::test_exceptions |
19-Dec-2024 15:56:10 | ia.pbcor: Test various exception cases |
19-Dec-2024 15:56:10 | PASSED |
19-Dec-2024 15:56:10 | |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord+ [0, 0] to [112, 75] (00:00:29.333, -00.07.24.000 to 23:59:29.600, +00.07.36.000) |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord+ [0, 0] to [112, 75] (00:00:29.333, -00.07.24.000 to 23:59:29.600, +00.07.36.000) |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [113, 76] |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord+ [0, 0] to [112, 75] (00:00:29.333, -00.07.24.000 to 23:59:29.600, +00.07.36.000) |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord+ [0, 0] to [112, 75] (00:00:29.333, -00.07.24.000 to 23:59:29.600, +00.07.36.000) |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [113, 76] |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO name:: No table opened. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:56:10 | test_tool_image_pbcor.py::ia_pbcor_test::test_full_image_divide |
19-Dec-2024 15:56:10 | ia.pbcor: Test full image divide |
19-Dec-2024 15:56:10 | PASSED |
19-Dec-2024 15:56:10 | |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord+ [0, 0] to [112, 75] (00:00:29.333, -00.07.24.000 to 23:59:29.600, +00.07.36.000) |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord+ [0, 0] to [112, 75] (00:00:29.333, -00.07.24.000 to 23:59:29.600, +00.07.36.000) |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [113, 76] |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord+ [0, 0] to [112, 75] (00:00:29.333, -00.07.24.000 to 23:59:29.600, +00.07.36.000) |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:10 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord+ [0, 0] to [112, 75] (00:00:29.333, -00.07.24.000 to 23:59:29.600, +00.07.36.000) |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [113, 76] |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO name:: No table opened. |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:56:11 | test_tool_image_pbcor.py::ia_pbcor_test::test_full_image_using_cutoff |
19-Dec-2024 15:56:11 | ia.pbcor: Test full image divide with cutoff |
19-Dec-2024 15:56:11 | PASSED |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ImageFactory::createImage Created Paged image 'zz.im' of shape [20, 20] with float valued pixels. |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO SubImageFactory::createImage Creating image 'pb_out.im' of shape [20, 20] |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ::::ImageFactory::createImage Created Paged image 'zz.im' of shape [20, 20] with float valued pixels. |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ::::image::fromshape Ran ia.fromshape |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ::::image::fromshape ia.fromshape(outfile="zz.im", shape=[20,20], csys={...}, linear=false, overwrite=false, log=true, type="f") |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ::::image::pbcor Ran ia.pbcor |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ::::image::pbcor ia.pbcor(pbimage="(...)", outfile="pb_out.im", overwrite=false, box="", region={...}, chans="", stokes="", mask="", mode="divide", cutoff=-1.000000, stretch=false) |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO name:: No table opened. |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:56:11 | test_tool_image_pbcor.py::ia_pbcor_test::test_history |
19-Dec-2024 15:56:11 | Test history records are written |
19-Dec-2024 15:56:11 | PASSED |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ImageFactory::createImage Created Paged image 'mult_pb.im' of shape [113, 76] with float valued pixels. |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO CasacRegionManager::fromBCS Using all spectral channels. |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO CasacRegionManager::fromBCS Using polarizations ALL |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 4, 1] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, Q) |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 4, 1] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, Q) |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [113, 76, 5, 2] |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 0, 0] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, I) |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO CasacRegionManager::fromBCS Using all spectral channels. |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO CasacRegionManager::fromBCS Using polarizations ALL |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 4, 1] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, Q) |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord Selected bounding box : |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 4, 1] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, Q) |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [113, 76, 5, 2] |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO name:: No table opened. |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:11 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:56:11 | test_tool_image_pbcor.py::ia_pbcor_test::test_multiply |
19-Dec-2024 15:56:11 | ia.pbcor: Test full image multiply with cutoff. Primary beam is 2 D, image is 4 D |
19-Dec-2024 15:56:11 | PASSED |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:12 INFO ImageFactory::createImage Created Temp image of shape [113, 76, 1, 1] with float valued pixels. |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:12 INFO SubImageFactory::createImage Creating image 'maskim' of shape [113, 76, 1, 1] |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:12 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:12 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289) Exception Reported: The input image shape ([113, 76, 5, 2]) and mask shape ([113, 76, 1, 1]) are different, and it was specified that the mask should not be extended, so the mask cannot be applied to the (sub)image. Specifying that the mask should be extended may resolve the issue at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 306 |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:12 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:12 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:12 INFO SubImageFactory::createImage Creating image 'blahblah' of shape [113, 76, 5, 2] |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:12 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:12 INFO name:: No table opened. |
19-Dec-2024 15:56:11 | 2024-12-19 20:56:12 INFO showcache:: The Table Cache is empty. |
19-Dec-2024 15:56:11 | test_tool_image_pbcor.py::ia_pbcor_test::test_stretch |
19-Dec-2024 15:56:11 | ia.pbcor(): Test stretch parameter |
19-Dec-2024 15:56:11 | PASSED |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pbcor/nose.xml - |
19-Dec-2024 15:56:11 | ========================= 9 passed, 1 warning in 1.92s ========================= |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msuvbinner/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msmetadata/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_fitprofile/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_sdm/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_deviation/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_measures/ |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_measures |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_measures/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_measures/ |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_transpose/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils/ |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_synthesisutils/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils/ |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_vpmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys/ |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_coordsys/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys/ |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_table/ |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_table |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_table/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_table/ |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_linearmosaic/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms/ |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms/ |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics/ |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_statistics/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics/ |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_createmultims/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/ |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/ |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
19-Dec-2024 15:56:11 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor |
19-Dec-2024 15:56:11 | |
19-Dec-2024 15:56:11 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pbcor/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
19-Dec-2024 15:56:12 | total 177372 |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci 15001 135247 Dec 19 20:42 casatestutils-6.7.0.18a13581.dev8+dirty-py3-none-any.whl |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci 15001 181320832 Dec 19 20:42 casatools-6.7.0.18a13581.dev8+dirty-cp38-cp38-manylinux_2_28_x86_64.whl |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 4320 Dec 19 20:56 test_tool_agentflagger.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 986 Dec 19 20:56 test_tool_calanalysis.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 2637 Dec 19 20:56 test_tool_calibrater.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 667 Dec 19 20:56 test_tool_componentlist.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 7447 Dec 19 20:56 test_tool_coordsys.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 12915 Dec 19 20:56 test_tool_image.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 2200 Dec 19 20:56 test_tool_image_collapse.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 1028 Dec 19 20:56 test_tool_image_deviation.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 2555 Dec 19 20:56 test_tool_image_fitprofile.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 1158 Dec 19 20:56 test_tool_image_pbcor.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 863 Dec 19 20:56 test_tool_image_pv.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 986 Dec 19 20:56 test_tool_image_rebin.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 1316 Dec 19 20:56 test_tool_image_regrid.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 1513 Dec 19 20:56 test_tool_image_statistics.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 745 Dec 19 20:56 test_tool_image_subimage.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 870 Dec 19 20:56 test_tool_image_transpose.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 1946 Dec 19 20:56 test_tool_imagepol.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 819 Dec 19 20:56 test_tool_linearmosaic.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 648 Dec 19 20:56 test_tool_logsink.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 529 Dec 19 20:56 test_tool_measures.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 5204 Dec 19 20:56 test_tool_ms.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 347 Dec 19 20:56 test_tool_ms_createmultims.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 2075 Dec 19 20:56 test_tool_ms_statwt.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 8613 Dec 19 20:56 test_tool_msmetadata.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 339 Dec 19 20:56 test_tool_msuvbinner.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 1151 Dec 19 20:56 test_tool_quanta.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 3957 Dec 19 20:56 test_tool_regionmanager.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 2052 Dec 19 20:56 test_tool_sdm.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 2076 Dec 19 20:56 test_tool_sdm_toms.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 428 Dec 19 20:56 test_tool_simulator.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 1696 Dec 19 20:56 test_tool_synthesisutils.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 1442 Dec 19 20:56 test_tool_table.xml |
19-Dec-2024 15:56:12 | -rw-r--r-- 1 casaci root 1697 Dec 19 20:56 test_tool_vpmanager.xml |
19-Dec-2024 15:56:12 | Finished task 'Test wheel' with result: Success |
19-Dec-2024 15:56:12 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
19-Dec-2024 15:56:12 | Parsing test results under /export/home/cbt-el7-6/bamboohome/xml-data/build-dir/CASASPECS-CI22-TTOML228... |
19-Dec-2024 15:56:12 | Finished task 'Parse tests' with result: Success |
19-Dec-2024 15:56:12 | Starting task 'Cleanup' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
19-Dec-2024 15:56:12 | Beginning to execute external process for build 'CASASPECS - CI Build - CAS-13581 - Test Tools Many Linux 2.28 #5 (CASASPECS-CI22-TTOML228-5)' ... running command line: /export/home/cbt-el7-6/bamboohome/temp/CASASPECS-CI22-TTOML228-5-ScriptBuildTask-3731392585405034425.sh ... in: /export/home/cbt-el7-6/bamboohome/xml-data/build-dir/CASASPECS-CI22-TTOML228 |
19-Dec-2024 15:56:12 | Starting cleanup |
19-Dec-2024 15:56:23 | wheel-container-test |
19-Dec-2024 15:56:25 | wheel-container-test |
19-Dec-2024 15:56:25 | Cleanup complete |
19-Dec-2024 15:56:25 | Finished task 'Cleanup' with result: Success |
19-Dec-2024 15:56:25 | Running post build plugin 'Docker Container Cleanup' |
19-Dec-2024 15:56:25 | Beginning to execute external process for build 'CASASPECS - CI Build - CAS-13581 - Test Tools Many Linux 2.28 #5 (CASASPECS-CI22-TTOML228-5)' ... running command line: /bin/docker rm -f wheel-container-test ... in: /export/home/cbt-el7-6/bamboohome/xml-data/build-dir/CASASPECS-CI22-TTOML228 |
19-Dec-2024 15:56:25 | Error response from daemon: No such container: wheel-container-test |
19-Dec-2024 15:56:25 | Running post build plugin 'NCover Results Collector' |
19-Dec-2024 15:56:25 | Running post build plugin 'Build Results Label Collector' |
19-Dec-2024 15:56:25 | Running post build plugin 'Clover Results Collector' |
19-Dec-2024 15:56:25 | Running post build plugin 'npm Cache Cleanup' |
19-Dec-2024 15:56:25 | Running post build plugin 'Artifact Copier' |
19-Dec-2024 15:56:25 | Publishing an artifact: Tests |
19-Dec-2024 15:56:25 | Finished publishing of artifact Non required job artifact Http Compression On : [Tests], patterns: [*.xml] anchored at: [wheeldirectory/] in 267.8 ms |
19-Dec-2024 15:56:25 | Publishing an artifact: xml Directories |
19-Dec-2024 15:56:25 | Finished publishing of artifact Non required job artifact Http Compression On : [xml Directories], patterns: [**/*.xml] anchored at: [wheeldirectory/] in 214.6 ms |
19-Dec-2024 15:56:25 | Finalising the build... |
19-Dec-2024 15:56:25 | Stopping timer. |
19-Dec-2024 15:56:25 | Build CASASPECS-CI22-TTOML228-5 completed. |
19-Dec-2024 15:56:25 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
19-Dec-2024 15:56:25 | Running on server: post build plugin 'NCover Results Collector' |
19-Dec-2024 15:56:25 | Running on server: post build plugin 'Build Labeller' |
19-Dec-2024 15:56:25 | Running on server: post build plugin 'Clover Delta Calculator' |
19-Dec-2024 15:56:25 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
19-Dec-2024 15:56:25 | All post build plugins have finished |
19-Dec-2024 15:56:25 | Generating build results summary... |
19-Dec-2024 15:56:26 | Saving build results to disk... |
19-Dec-2024 15:56:26 | Store variable context... |
19-Dec-2024 15:56:26 | Finished building CASASPECS-CI22-TTOML228-5. |