Build log

The build generated 53,116 lines of output. The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.

30-Oct-2025 13:04:55	Check that using the calibrater to modify the vis shows in the activity record
30-Oct-2025 13:04:55	PASSED
30-Oct-2025 13:04:55
30-Oct-2025 13:04:56	2025-10-30 17:04:56 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:04:56	2025-10-30 17:04:56 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:04:56	2025-10-30 17:04:56 INFO Clearing all model records in MS header.
30-Oct-2025 13:04:56	2025-10-30 17:04:56 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:04:57	2025-10-30 17:04:57 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:04:57	2025-10-30 17:04:58 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:04:57	2025-10-30 17:04:58 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:04:57	2025-10-30 17:04:58 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
30-Oct-2025 13:04:57	2025-10-30 17:04:58 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
30-Oct-2025 13:04:57	2025-10-30 17:04:58 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:04:57	2025-10-30 17:04:58 INFO calibrater::corrupt Beginning corrupt---------------------------
30-Oct-2025 13:04:57	2025-10-30 17:04:58 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply:
30-Oct-2025 13:04:57	2025-10-30 17:04:58 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:00	2025-10-30 17:05:00 INFO calibrater::corrupt Finished corrupting.
30-Oct-2025 13:05:02	2025-10-30 17:05:02 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:05:02	test_tool_calibrater.py::calibrater_test::test_corruptCal
30-Oct-2025 13:05:02	Check that the MS is corrupted using the cal table
30-Oct-2025 13:05:02	PASSED
30-Oct-2025 13:05:02
30-Oct-2025 13:05:02	2025-10-30 17:05:03 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:05:02	2025-10-30 17:05:03 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:05:02	2025-10-30 17:05:03 INFO Clearing all model records in MS header.
30-Oct-2025 13:05:02	2025-10-30 17:05:03 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:05:03	2025-10-30 17:05:04 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:05:04	2025-10-30 17:05:04 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:05:04	2025-10-30 17:05:04 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:05:04	2025-10-30 17:05:04 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:05:04	test_tool_calibrater.py::calibrater_test::test_createEmpty
30-Oct-2025 13:05:04	Check that an empty cal table can be created
30-Oct-2025 13:05:04	PASSED
30-Oct-2025 13:05:04
30-Oct-2025 13:05:04	2025-10-30 17:05:05 INFO name:: No table opened.
30-Oct-2025 13:05:04	2025-10-30 17:05:05 INFO showcache:: The Table Cache is empty.
30-Oct-2025 13:05:04	2025-10-30 17:05:05 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:05:04	2025-10-30 17:05:05 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:05:04	2025-10-30 17:05:05 INFO Clearing all model records in MS header.
30-Oct-2025 13:05:04	2025-10-30 17:05:05 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:05:05	2025-10-30 17:05:06 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO name:: No table opened.
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO showcache:: The Table Cache has the following 16 entries:
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms"
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA"
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION"
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED"
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD"
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD"
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY"
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION"
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING"
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION"
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR"
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE"
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW"
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE"
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL"
30-Oct-2025 13:05:06	2025-10-30 17:05:06 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER"
30-Oct-2025 13:05:06	2025-10-30 17:05:06 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:05:06	test_tool_calibrater.py::calibrater_test::test_done
30-Oct-2025 13:05:06	Check that done closes the active calibrator tool
30-Oct-2025 13:05:06	PASSED
30-Oct-2025 13:05:06
30-Oct-2025 13:05:06	2025-10-30 17:05:07 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
30-Oct-2025 13:05:06	2025-10-30 17:05:07 INFO calibrater::open **Using OLD VI-driven calibrater tool**
30-Oct-2025 13:05:06	2025-10-30 17:05:07 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:05:06	2025-10-30 17:05:07 INFO Clearing all model records in MS header.
30-Oct-2025 13:05:06	2025-10-30 17:05:07 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:05:07	2025-10-30 17:05:08 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:05:08	2025-10-30 17:05:08 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:05:08	2025-10-30 17:05:08 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:05:08	2025-10-30 17:05:08 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
30-Oct-2025 13:05:08	2025-10-30 17:05:08 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
30-Oct-2025 13:05:08	2025-10-30 17:05:08 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:08	2025-10-30 17:05:08 INFO calibrater::correct Beginning correct---------------------------
30-Oct-2025 13:05:08	2025-10-30 17:05:08 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
30-Oct-2025 13:05:08	2025-10-30 17:05:08 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:11	2025-10-30 17:05:11 INFO calibrater::correct Finished correcting.
30-Oct-2025 13:05:11	2025-10-30 17:05:12 INFO calibrater::open **Using OLD VI-driven calibrater tool**
30-Oct-2025 13:05:11	2025-10-30 17:05:12 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:05:11	2025-10-30 17:05:12 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:05:11	2025-10-30 17:05:12 INFO calibrater::initcalset Beginning initcalset------------------------
30-Oct-2025 13:05:11	2025-10-30 17:05:12 INFO VisSet::VisSet Initializing MODEL_DATA (to unity) and CORRECTED_DATA (to DATA)
30-Oct-2025 13:05:12	2025-10-30 17:05:12 INFO VisSet::VisSet Initialized 328860 rows.
30-Oct-2025 13:05:13	2025-10-30 17:05:13 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
30-Oct-2025 13:05:13	test_tool_calibrater.py::calibrater_test::test_reinitModel
30-Oct-2025 13:05:13	Check that initcalset will reset the CORRECTED_DATA to unity
30-Oct-2025 13:05:13	PASSED
30-Oct-2025 13:05:13
30-Oct-2025 13:05:13	2025-10-30 17:05:14 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:05:13	2025-10-30 17:05:14 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:05:13	2025-10-30 17:05:14 INFO Clearing all model records in MS header.
30-Oct-2025 13:05:13	2025-10-30 17:05:14 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:05:15	2025-10-30 17:05:15 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:05:15	2025-10-30 17:05:15 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:05:15	2025-10-30 17:05:15 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:05:15	2025-10-30 17:05:15 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
30-Oct-2025 13:05:15	2025-10-30 17:05:15 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
30-Oct-2025 13:05:15	2025-10-30 17:05:15 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:15	2025-10-30 17:05:15 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)-------
30-Oct-2025 13:05:15	2025-10-30 17:05:15 INFO Calibrater::setsolve Arranging to SOLVE:
30-Oct-2025 13:05:15	2025-10-30 17:05:15 INFO Calibrater::setsolve . Mf Mueller: table=gaincaltest2.ms.G0 append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
30-Oct-2025 13:05:15	2025-10-30 17:05:15 INFO calibrater::reset Reseting solve/apply state
30-Oct-2025 13:05:15	2025-10-30 17:05:15 INFO calibrater::solve Beginning solve-----------------------------
30-Oct-2025 13:05:15	2025-10-30 17:05:15 SEVERE Calibrater::solve Caught exception: Please run setsolve before attempting to solve.
30-Oct-2025 13:05:15	2025-10-30 17:05:15 INFO Calibrater::solve Reseting entire solve/apply state.
30-Oct-2025 13:05:15	2025-10-30 17:05:15 SEVERE Exception Reported: Error in Calibrater::solve.
30-Oct-2025 13:05:15	2025-10-30 17:05:15 INFO calibrater::correct Beginning correct---------------------------
30-Oct-2025 13:05:15	2025-10-30 17:05:15 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
30-Oct-2025 13:05:15	2025-10-30 17:05:15 INFO Calibrater::correct2 (VI2/VB2) . (None)
30-Oct-2025 13:05:15	2025-10-30 17:05:16 SEVERE Calibrater::correct2 (VI2/VB2) Caught exception: Nothing to Apply
30-Oct-2025 13:05:15	2025-10-30 17:05:16 INFO Calibrater::correct2 (VI2/VB2) Resetting all calibration application settings.
30-Oct-2025 13:05:15	2025-10-30 17:05:16 SEVERE Exception Reported: Error in Calibrater::correct.
30-Oct-2025 13:05:15	2025-10-30 17:05:16 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:05:15	test_tool_calibrater.py::calibrater_test::test_resetSolveApply
30-Oct-2025 13:05:15	Check that the reset function can clear set apply and solves
30-Oct-2025 13:05:15	PASSED
30-Oct-2025 13:05:15
30-Oct-2025 13:05:15	2025-10-30 17:05:16 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:05:15	2025-10-30 17:05:16 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:05:15	2025-10-30 17:05:16 INFO Clearing all model records in MS header.
30-Oct-2025 13:05:15	2025-10-30 17:05:16 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:05:17	2025-10-30 17:05:17 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:05:17	2025-10-30 17:05:17 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:05:17	2025-10-30 17:05:17 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:05:18	2025-10-30 17:05:18 INFO calibrater::setdata Beginning selectvis--(MSSelection version)-------
30-Oct-2025 13:05:18	2025-10-30 17:05:18 INFO calibrater::reset Reseting solve/apply state
30-Oct-2025 13:05:18	2025-10-30 17:05:18 INFO Calibrater::selectvis Performing selection on MeasurementSet
30-Oct-2025 13:05:18	2025-10-30 17:05:18 INFO Calibrater::selectvis+ Selecting on spw: '1'
30-Oct-2025 13:05:18	2025-10-30 17:05:18 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215
30-Oct-2025 13:05:18	2025-10-30 17:05:18 INFO Calibrater::selectvis Frequency selection:
30-Oct-2025 13:05:18	2025-10-30 17:05:18 INFO Calibrater::selectvis . Spw 1:0~7 (8 channels, step by 1)
30-Oct-2025 13:05:18	2025-10-30 17:05:18 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect=''
30-Oct-2025 13:05:18	2025-10-30 17:05:18 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:05:18	test_tool_calibrater.py::calibrater_test::test_returnDict
30-Oct-2025 13:05:18	Check that the returndict function gives a dictonary with the expected keys
30-Oct-2025 13:05:18	PASSED
30-Oct-2025 13:05:18
30-Oct-2025 13:05:19	2025-10-30 17:05:19 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:05:19	2025-10-30 17:05:19 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:05:19	2025-10-30 17:05:19 INFO Clearing all model records in MS header.
30-Oct-2025 13:05:19	2025-10-30 17:05:19 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:05:20	2025-10-30 17:05:21 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:05:20	2025-10-30 17:05:21 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:05:20	2025-10-30 17:05:21 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:05:20	2025-10-30 17:05:21 INFO calibrater::setdata Beginning selectvis--(MSSelection version)-------
30-Oct-2025 13:05:20	2025-10-30 17:05:21 INFO calibrater::reset Reseting solve/apply state
30-Oct-2025 13:05:20	2025-10-30 17:05:21 INFO Calibrater::selectvis Performing selection on MeasurementSet
30-Oct-2025 13:05:20	2025-10-30 17:05:21 INFO Calibrater::selectvis+ Selecting on antenna/baseline: '0'
30-Oct-2025 13:05:21	2025-10-30 17:05:21 INFO Calibrater::selectvis By selection 328860 rows are reduced to 65772
30-Oct-2025 13:05:21	2025-10-30 17:05:21 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws.
30-Oct-2025 13:05:21	2025-10-30 17:05:21 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect=''
30-Oct-2025 13:05:21	2025-10-30 17:05:21 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
30-Oct-2025 13:05:21	2025-10-30 17:05:21 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
30-Oct-2025 13:05:21	2025-10-30 17:05:21 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:21	2025-10-30 17:05:21 INFO calibrater::correct Beginning correct---------------------------
30-Oct-2025 13:05:21	2025-10-30 17:05:21 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
30-Oct-2025 13:05:21	2025-10-30 17:05:21 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:22	2025-10-30 17:05:23 INFO calibrater::correct Finished correcting.
30-Oct-2025 13:05:23	2025-10-30 17:05:23 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:05:23	test_tool_calibrater.py::calibrater_test::test_selectVisBaseline
30-Oct-2025 13:05:23	Check that selectvis properly selects baseline/antenna
30-Oct-2025 13:05:23	65772 65772
30-Oct-2025 13:05:23	263088 263088
30-Oct-2025 13:05:23	PASSED
30-Oct-2025 13:05:23
30-Oct-2025 13:05:24	2025-10-30 17:05:24 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:05:24	2025-10-30 17:05:24 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:05:24	2025-10-30 17:05:24 INFO Clearing all model records in MS header.
30-Oct-2025 13:05:24	2025-10-30 17:05:24 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:05:25	2025-10-30 17:05:25 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:05:25	2025-10-30 17:05:26 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:05:25	2025-10-30 17:05:26 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:05:25	2025-10-30 17:05:26 INFO calibrater::setdata Beginning selectvis--(MSSelection version)-------
30-Oct-2025 13:05:25	2025-10-30 17:05:26 INFO calibrater::reset Reseting solve/apply state
30-Oct-2025 13:05:25	2025-10-30 17:05:26 INFO Calibrater::selectvis Performing selection on MeasurementSet
30-Oct-2025 13:05:25	2025-10-30 17:05:26 INFO Calibrater::selectvis+ Selecting on field: '0'
30-Oct-2025 13:05:25	2025-10-30 17:05:26 INFO Calibrater::selectvis By selection 328860 rows are reduced to 172260
30-Oct-2025 13:05:25	2025-10-30 17:05:26 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws.
30-Oct-2025 13:05:25	2025-10-30 17:05:26 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect=''
30-Oct-2025 13:05:25	2025-10-30 17:05:26 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
30-Oct-2025 13:05:25	2025-10-30 17:05:26 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
30-Oct-2025 13:05:25	2025-10-30 17:05:26 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:25	2025-10-30 17:05:26 INFO calibrater::correct Beginning correct---------------------------
30-Oct-2025 13:05:25	2025-10-30 17:05:26 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
30-Oct-2025 13:05:25	2025-10-30 17:05:26 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:27	2025-10-30 17:05:27 INFO calibrater::correct Finished correcting.
30-Oct-2025 13:05:27	2025-10-30 17:05:28 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:05:27	test_tool_calibrater.py::calibrater_test::test_selectVisField
30-Oct-2025 13:05:27	Check that the field is properly selected by selectvis
30-Oct-2025 13:05:27	PASSED
30-Oct-2025 13:05:27
30-Oct-2025 13:05:28	2025-10-30 17:05:29 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:05:28	2025-10-30 17:05:29 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:05:28	2025-10-30 17:05:29 INFO Clearing all model records in MS header.
30-Oct-2025 13:05:28	2025-10-30 17:05:29 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:05:30	2025-10-30 17:05:30 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:05:30	2025-10-30 17:05:30 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:05:30	2025-10-30 17:05:30 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:05:30	2025-10-30 17:05:30 INFO calibrater::setdata Beginning selectvis--(MSSelection version)-------
30-Oct-2025 13:05:30	2025-10-30 17:05:30 INFO calibrater::reset Reseting solve/apply state
30-Oct-2025 13:05:30	2025-10-30 17:05:30 INFO Calibrater::selectvis Performing selection on MeasurementSet
30-Oct-2025 13:05:30	2025-10-30 17:05:30 INFO Calibrater::selectvis+ Selecting on intent: 'AMPLI'
30-Oct-2025 13:05:30	2025-10-30 17:05:30 INFO Calibrater::selectvis Selection did not drop any rows
30-Oct-2025 13:05:30	2025-10-30 17:05:30 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws.
30-Oct-2025 13:05:30	2025-10-30 17:05:30 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect=''
30-Oct-2025 13:05:30	2025-10-30 17:05:30 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
30-Oct-2025 13:05:30	2025-10-30 17:05:30 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
30-Oct-2025 13:05:30	2025-10-30 17:05:31 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:30	2025-10-30 17:05:31 INFO calibrater::correct Beginning correct---------------------------
30-Oct-2025 13:05:30	2025-10-30 17:05:31 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
30-Oct-2025 13:05:30	2025-10-30 17:05:31 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:33	2025-10-30 17:05:33 INFO calibrater::correct Finished correcting.
30-Oct-2025 13:05:33	2025-10-30 17:05:33 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:05:33	test_tool_calibrater.py::calibrater_test::test_selectVisIntent
30-Oct-2025 13:05:33	Check that the intent is properly selected by selectvis
30-Oct-2025 13:05:33	PASSED
30-Oct-2025 13:05:33
30-Oct-2025 13:05:34	2025-10-30 17:05:34 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:05:34	2025-10-30 17:05:34 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:05:34	2025-10-30 17:05:34 INFO Clearing all model records in MS header.
30-Oct-2025 13:05:34	2025-10-30 17:05:34 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:05:35	2025-10-30 17:05:36 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:05:36	2025-10-30 17:05:36 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:05:36	2025-10-30 17:05:36 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:05:36	2025-10-30 17:05:36 INFO calibrater::setdata Beginning selectvis--(MSSelection version)-------
30-Oct-2025 13:05:36	2025-10-30 17:05:36 INFO calibrater::reset Reseting solve/apply state
30-Oct-2025 13:05:36	2025-10-30 17:05:36 INFO Calibrater::selectvis Performing selection on MeasurementSet
30-Oct-2025 13:05:36	2025-10-30 17:05:36 INFO Calibrater::selectvis+ Selecting by observation IDs: '0'
30-Oct-2025 13:05:36	2025-10-30 17:05:36 INFO Calibrater::selectvis By selection 328860 rows are reduced to 318870
30-Oct-2025 13:05:36	2025-10-30 17:05:36 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws.
30-Oct-2025 13:05:36	2025-10-30 17:05:36 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect=''
30-Oct-2025 13:05:36	2025-10-30 17:05:36 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
30-Oct-2025 13:05:36	2025-10-30 17:05:36 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
30-Oct-2025 13:05:36	2025-10-30 17:05:36 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:36	2025-10-30 17:05:36 INFO calibrater::correct Beginning correct---------------------------
30-Oct-2025 13:05:36	2025-10-30 17:05:36 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
30-Oct-2025 13:05:36	2025-10-30 17:05:36 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:38	2025-10-30 17:05:39 INFO calibrater::correct Finished correcting.
30-Oct-2025 13:05:38	2025-10-30 17:05:39 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:05:38	test_tool_calibrater.py::calibrater_test::test_selectVisObs
30-Oct-2025 13:05:38	PASSED
30-Oct-2025 13:05:38
30-Oct-2025 13:05:39	2025-10-30 17:05:40 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:05:39	2025-10-30 17:05:40 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:05:39	2025-10-30 17:05:40 INFO Clearing all model records in MS header.
30-Oct-2025 13:05:39	2025-10-30 17:05:40 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:05:41	2025-10-30 17:05:41 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:05:41	2025-10-30 17:05:41 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:05:41	2025-10-30 17:05:41 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:05:41	2025-10-30 17:05:41 INFO calibrater::setdata Beginning selectvis--(MSSelection version)-------
30-Oct-2025 13:05:41	2025-10-30 17:05:41 INFO calibrater::reset Reseting solve/apply state
30-Oct-2025 13:05:41	2025-10-30 17:05:41 INFO Calibrater::selectvis Performing selection on MeasurementSet
30-Oct-2025 13:05:41	2025-10-30 17:05:41 INFO Calibrater::selectvis+ Selecting on scan: '2'
30-Oct-2025 13:05:41	2025-10-30 17:05:41 INFO Calibrater::selectvis By selection 328860 rows are reduced to 15660
30-Oct-2025 13:05:41	2025-10-30 17:05:41 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws.
30-Oct-2025 13:05:41	2025-10-30 17:05:41 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect=''
30-Oct-2025 13:05:41	2025-10-30 17:05:41 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
30-Oct-2025 13:05:41	2025-10-30 17:05:41 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
30-Oct-2025 13:05:41	2025-10-30 17:05:42 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:41	2025-10-30 17:05:42 INFO calibrater::correct Beginning correct---------------------------
30-Oct-2025 13:05:41	2025-10-30 17:05:42 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
30-Oct-2025 13:05:41	2025-10-30 17:05:42 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:41	2025-10-30 17:05:42 INFO calibrater::correct Finished correcting.
30-Oct-2025 13:05:42	2025-10-30 17:05:42 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:05:42	test_tool_calibrater.py::calibrater_test::test_selectVisScan
30-Oct-2025 13:05:42	Check tht the scan is properly selected by selectvis
30-Oct-2025 13:05:42	PASSED
30-Oct-2025 13:05:42
30-Oct-2025 13:05:43	2025-10-30 17:05:43 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:05:43	2025-10-30 17:05:43 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:05:43	2025-10-30 17:05:43 INFO Clearing all model records in MS header.
30-Oct-2025 13:05:43	2025-10-30 17:05:43 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:05:44	2025-10-30 17:05:45 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:05:44	2025-10-30 17:05:45 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:05:44	2025-10-30 17:05:45 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:05:44	2025-10-30 17:05:45 INFO calibrater::setdata Beginning selectvis--(MSSelection version)-------
30-Oct-2025 13:05:44	2025-10-30 17:05:45 INFO calibrater::reset Reseting solve/apply state
30-Oct-2025 13:05:44	2025-10-30 17:05:45 INFO Calibrater::selectvis Performing selection on MeasurementSet
30-Oct-2025 13:05:44	2025-10-30 17:05:45 INFO Calibrater::selectvis+ Selecting on spw: '0'
30-Oct-2025 13:05:45	2025-10-30 17:05:45 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215
30-Oct-2025 13:05:45	2025-10-30 17:05:45 INFO Calibrater::selectvis Frequency selection:
30-Oct-2025 13:05:45	2025-10-30 17:05:45 INFO Calibrater::selectvis . Spw 0:0~7 (8 channels, step by 1)
30-Oct-2025 13:05:45	2025-10-30 17:05:45 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect=''
30-Oct-2025 13:05:45	2025-10-30 17:05:45 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
30-Oct-2025 13:05:45	2025-10-30 17:05:45 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
30-Oct-2025 13:05:45	2025-10-30 17:05:45 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:45	2025-10-30 17:05:45 INFO calibrater::correct Beginning correct---------------------------
30-Oct-2025 13:05:45	2025-10-30 17:05:45 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
30-Oct-2025 13:05:45	2025-10-30 17:05:45 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:46	2025-10-30 17:05:46 INFO calibrater::correct Finished correcting.
30-Oct-2025 13:05:47	2025-10-30 17:05:47 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:05:47	test_tool_calibrater.py::calibrater_test::test_selectVisSpw
30-Oct-2025 13:05:47	Check that spw is properly selected by selectvis
30-Oct-2025 13:05:47	PASSED
30-Oct-2025 13:05:47
30-Oct-2025 13:05:47	2025-10-30 17:05:48 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:05:47	2025-10-30 17:05:48 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:05:47	2025-10-30 17:05:48 INFO Clearing all model records in MS header.
30-Oct-2025 13:05:47	2025-10-30 17:05:48 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:05:49	2025-10-30 17:05:49 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:05:49	2025-10-30 17:05:49 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:05:49	2025-10-30 17:05:49 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:05:49	2025-10-30 17:05:49 INFO calibrater::setdata Beginning selectvis--(MSSelection version)-------
30-Oct-2025 13:05:49	2025-10-30 17:05:49 INFO calibrater::reset Reseting solve/apply state
30-Oct-2025 13:05:49	2025-10-30 17:05:49 INFO Calibrater::selectvis Performing selection on MeasurementSet
30-Oct-2025 13:05:49	2025-10-30 17:05:49 INFO Calibrater::selectvis+ Selecting on time: '>04:38:23'
30-Oct-2025 13:05:49	2025-10-30 17:05:49 INFO Calibrater::selectvis By selection 328860 rows are reduced to 313200
30-Oct-2025 13:05:49	2025-10-30 17:05:49 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws.
30-Oct-2025 13:05:49	2025-10-30 17:05:49 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect=''
30-Oct-2025 13:05:49	2025-10-30 17:05:49 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
30-Oct-2025 13:05:49	2025-10-30 17:05:49 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
30-Oct-2025 13:05:49	2025-10-30 17:05:50 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:49	2025-10-30 17:05:50 INFO calibrater::correct Beginning correct---------------------------
30-Oct-2025 13:05:49	2025-10-30 17:05:50 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
30-Oct-2025 13:05:49	2025-10-30 17:05:50 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:52	2025-10-30 17:05:52 INFO calibrater::correct Finished correcting.
30-Oct-2025 13:05:52	2025-10-30 17:05:53 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:05:52	test_tool_calibrater.py::calibrater_test::test_selectVisTime
30-Oct-2025 13:05:52	Check that time is properly selected by selectvis
30-Oct-2025 13:05:52	PASSED
30-Oct-2025 13:05:52
30-Oct-2025 13:05:53	2025-10-30 17:05:53 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:05:53	2025-10-30 17:05:53 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:05:53	2025-10-30 17:05:53 INFO Clearing all model records in MS header.
30-Oct-2025 13:05:53	2025-10-30 17:05:53 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:05:54	2025-10-30 17:05:54 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:05:54	2025-10-30 17:05:55 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:05:54	2025-10-30 17:05:55 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:05:54	2025-10-30 17:05:55 INFO calibrater::setdata Beginning selectvis--(MSSelection version)-------
30-Oct-2025 13:05:54	2025-10-30 17:05:55 INFO calibrater::reset Reseting solve/apply state
30-Oct-2025 13:05:54	2025-10-30 17:05:55 INFO Calibrater::selectvis Performing selection on MeasurementSet
30-Oct-2025 13:05:54	2025-10-30 17:05:55 INFO Calibrater::selectvis+ Selecting on uvrange: '> 500000lambda'
30-Oct-2025 13:05:55	2025-10-30 17:05:55 INFO Calibrater::selectvis By selection 328860 rows are reduced to 103321
30-Oct-2025 13:05:55	2025-10-30 17:05:55 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws.
30-Oct-2025 13:05:55	2025-10-30 17:05:55 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect=''
30-Oct-2025 13:05:55	2025-10-30 17:05:55 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
30-Oct-2025 13:05:55	2025-10-30 17:05:55 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
30-Oct-2025 13:05:55	2025-10-30 17:05:55 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:55	2025-10-30 17:05:55 INFO calibrater::correct Beginning correct---------------------------
30-Oct-2025 13:05:55	2025-10-30 17:05:55 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
30-Oct-2025 13:05:55	2025-10-30 17:05:55 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:05:57	2025-10-30 17:05:57 INFO calibrater::correct Finished correcting.
30-Oct-2025 13:05:57	2025-10-30 17:05:58 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:05:57	test_tool_calibrater.py::calibrater_test::test_selectVisUVrange
30-Oct-2025 13:05:57	Check that selectvis properly selects for uvrange
30-Oct-2025 13:05:57	PASSED
30-Oct-2025 13:05:57
30-Oct-2025 13:05:57	2025-10-30 17:05:58 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:05:57	2025-10-30 17:05:58 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:05:57	2025-10-30 17:05:58 INFO Clearing all model records in MS header.
30-Oct-2025 13:05:57	2025-10-30 17:05:58 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:05:59	2025-10-30 17:05:59 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:05:59	2025-10-30 17:06:00 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:05:59	2025-10-30 17:06:00 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:05:59	2025-10-30 17:06:00 INFO calibrater::parsecallibfile Beginning parsecallibfile-)-------
30-Oct-2025 13:05:59	2025-10-30 17:06:00 INFO calibrater::setcallib Beginning setcallib---------
30-Oct-2025 13:05:59	2025-10-30 17:06:00 INFO Calibrater::setcallib2(callib) Arranging to APPLY:
30-Oct-2025 13:05:59	2025-10-30 17:06:00 INFO . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true
30-Oct-2025 13:05:59	2025-10-30 17:06:00 INFO . 0:
30-Oct-2025 13:05:59	2025-10-30 17:06:00 INFO + MS: obs= scan= fld= intent= spw=
30-Oct-2025 13:05:59	2025-10-30 17:06:00 INFO + CT: tinterp=linear finterp=
30-Oct-2025 13:05:59	2025-10-30 17:06:00 INFO + obsmap=[] scanmap=[] fldmap=[]
30-Oct-2025 13:05:59	2025-10-30 17:06:00 INFO + spwmap=[] antmap=[]
30-Oct-2025 13:05:59	2025-10-30 17:06:00 INFO calibrater::corrupt Beginning corrupt---------------------------
30-Oct-2025 13:05:59	2025-10-30 17:06:00 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply:
30-Oct-2025 13:05:59	2025-10-30 17:06:00 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true
30-Oct-2025 13:06:01	2025-10-30 17:06:02 INFO calibrater::corrupt Finished corrupting.
30-Oct-2025 13:06:02	2025-10-30 17:06:02 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:06:02	test_tool_calibrater.py::calibrater_test::test_setCalLib
30-Oct-2025 13:06:02	Check that a provided cal table can be used to corrupt the MODEL_DATA
30-Oct-2025 13:06:02	PASSED
30-Oct-2025 13:06:02
30-Oct-2025 13:06:02	2025-10-30 17:06:03 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:06:02	2025-10-30 17:06:03 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:06:02	2025-10-30 17:06:03 INFO Clearing all model records in MS header.
30-Oct-2025 13:06:02	2025-10-30 17:06:03 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:06:03	2025-10-30 17:06:04 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:06:04	2025-10-30 17:06:04 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:06:04	2025-10-30 17:06:04 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:06:04	2025-10-30 17:06:04 INFO Calibrater::setCorrDepFlags Setting correlation dependent flags = True
30-Oct-2025 13:06:04	2025-10-30 17:06:04 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:06:04	test_tool_calibrater.py::calibrater_test::test_setCorrDepFlags
30-Oct-2025 13:06:04	Check that corrdepflags will be checked
30-Oct-2025 13:06:04	PASSED
30-Oct-2025 13:06:04
30-Oct-2025 13:06:04	2025-10-30 17:06:05 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:06:04	2025-10-30 17:06:05 INFO calibrater::open Opening MS: ngc5921.ms for calibration.
30-Oct-2025 13:06:04	2025-10-30 17:06:05 INFO Clearing all model records in MS header.
30-Oct-2025 13:06:04	2025-10-30 17:06:05 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:06:04	2025-10-30 17:06:05 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:06:04	2025-10-30 17:06:05 INFO VisSetUtil::initScrCols Initialized 22653 rows.
30-Oct-2025 13:06:04	2025-10-30 17:06:05 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:06:04	2025-10-30 17:06:05 INFO calibrater::smooth Beginning smooth--(MSSelection version)-------
30-Oct-2025 13:06:04	2025-10-30 17:06:05 INFO Calibrater::smooth Beginning smoothing/interpolating method.
30-Oct-2025 13:06:04	2025-10-30 17:06:05 WARN Found pre-v4.1 caltable (/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ngc5921.gcal); attempting to update...
30-Oct-2025 13:06:04	2025-10-30 17:06:05 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added.
30-Oct-2025 13:06:04	2025-10-30 17:06:05 INFO Calibrater::smooth Storing result in testcalout.cal
30-Oct-2025 13:06:04	2025-10-30 17:06:05 INFO Writing solutions to table: testcalout.cal
30-Oct-2025 13:06:05	2025-10-30 17:06:05 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:06:05	test_tool_calibrater.py::calibrater_test::test_smoothedCalTables
30-Oct-2025 13:06:05	Check that the smooth command creates a smoothed cal table
30-Oct-2025 13:06:05	PASSED
30-Oct-2025 13:06:05
30-Oct-2025 13:06:05	2025-10-30 17:06:05 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
30-Oct-2025 13:06:05	2025-10-30 17:06:05 INFO calibrater::open **Using OLD VI-driven calibrater tool**
30-Oct-2025 13:06:05	2025-10-30 17:06:05 INFO calibrater::open Opening MS: ngc5921.ms for calibration.
30-Oct-2025 13:06:05	2025-10-30 17:06:05 INFO Clearing all model records in MS header.
30-Oct-2025 13:06:05	2025-10-30 17:06:05 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO VisSetUtil::initScrCols Initialized 22653 rows.
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO calibrater::setsolvebandpoly Beginning setsolvebandpoly--(MSSelection version)-------
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO Calibrater::setsolvebandpoly Arranging to SOLVE:
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO Calibrater::setsolvebandpoly . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO calibrater::solve Beginning solve-----------------------------
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO Calibrater::solve The following calibration terms are arranged for apply:
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO Calibrater::solve . (None)
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO Calibrater::solve The following calibration term is arranged for solve:
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO Calibrater::solve . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO Calibrater::solve Solving for BPOLY
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO For solint = inf, found 7 solution intervals.
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials.
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz.
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz.
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz.
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas.
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial.
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.059507/0.0681762/0.0765806
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial.
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.336529/0.750193/1.6779
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial.
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0630839/0.0689061/0.0756384
30-Oct-2025 13:06:05	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial.
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.279482/0.74979/1.59355
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions.
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials.
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz.
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz.
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz.
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas.
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial.
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0672607/0.089081/0.111106
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial.
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.31075/3.32219/4.29305
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial.
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0652822/0.0889198/0.116912
30-Oct-2025 13:06:06	2025-10-30 17:06:06 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial.
30-Oct-2025 13:06:06	2025-10-30 17:06:07 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.44269/3.26616/4.3519
30-Oct-2025 13:06:06	2025-10-30 17:06:07 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions.
30-Oct-2025 13:06:06	2025-10-30 17:06:07 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly
30-Oct-2025 13:06:06	2025-10-30 17:06:07 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION
30-Oct-2025 13:06:06	2025-10-30 17:06:07 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials.
30-Oct-2025 13:06:06	2025-10-30 17:06:07 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5
30-Oct-2025 13:06:06	2025-10-30 17:06:07 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7
30-Oct-2025 13:06:06	2025-10-30 17:06:07 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz.
30-Oct-2025 13:06:06	2025-10-30 17:06:07 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz.
30-Oct-2025 13:06:06	2025-10-30 17:06:07 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz.
30-Oct-2025 13:06:06	2025-10-30 17:06:07 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas.
30-Oct-2025 13:06:06	2025-10-30 17:06:07 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial.
30-Oct-2025 13:06:06	2025-10-30 17:06:07 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350681/0.587724/0.894558
30-Oct-2025 13:06:06	2025-10-30 17:06:07 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial.
30-Oct-2025 13:06:08	2025-10-30 17:06:09 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.296/59.0077/111.454
30-Oct-2025 13:06:08	2025-10-30 17:06:09 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial.
30-Oct-2025 13:06:08	2025-10-30 17:06:09 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.354236/0.581733/0.988903
30-Oct-2025 13:06:08	2025-10-30 17:06:09 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial.
30-Oct-2025 13:06:11	2025-10-30 17:06:11 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 17.2419/56.3249/117.264
30-Oct-2025 13:06:11	2025-10-30 17:06:11 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions.
30-Oct-2025 13:06:11	2025-10-30 17:06:11 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly
30-Oct-2025 13:06:11	2025-10-30 17:06:11 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION
30-Oct-2025 13:06:11	2025-10-30 17:06:11 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials.
30-Oct-2025 13:06:11	2025-10-30 17:06:11 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5
30-Oct-2025 13:06:11	2025-10-30 17:06:11 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7
30-Oct-2025 13:06:11	2025-10-30 17:06:11 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz.
30-Oct-2025 13:06:11	2025-10-30 17:06:11 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz.
30-Oct-2025 13:06:11	2025-10-30 17:06:11 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz.
30-Oct-2025 13:06:11	2025-10-30 17:06:11 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas.
30-Oct-2025 13:06:11	2025-10-30 17:06:11 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial.
30-Oct-2025 13:06:11	2025-10-30 17:06:11 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0850169/0.113968/0.15276
30-Oct-2025 13:06:11	2025-10-30 17:06:11 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial.
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.67561/5.33243/8.17296
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial.
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0784236/0.114345/0.159908
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial.
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.46392/5.27232/7.20673
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions.
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials.
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz.
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz.
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz.
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas.
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial.
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0703936/0.102501/0.131676
30-Oct-2025 13:06:11	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial.
30-Oct-2025 13:06:12	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.98728/4.47977/5.84264
30-Oct-2025 13:06:12	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial.
30-Oct-2025 13:06:12	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0751114/0.102994/0.138529
30-Oct-2025 13:06:12	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial.
30-Oct-2025 13:06:12	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.18629/4.47068/5.8941
30-Oct-2025 13:06:12	2025-10-30 17:06:12 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions.
30-Oct-2025 13:06:12	2025-10-30 17:06:12 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly
30-Oct-2025 13:06:12	2025-10-30 17:06:13 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION
30-Oct-2025 13:06:12	2025-10-30 17:06:13 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials.
30-Oct-2025 13:06:12	2025-10-30 17:06:13 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5
30-Oct-2025 13:06:12	2025-10-30 17:06:13 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7
30-Oct-2025 13:06:12	2025-10-30 17:06:13 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz.
30-Oct-2025 13:06:12	2025-10-30 17:06:13 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz.
30-Oct-2025 13:06:12	2025-10-30 17:06:13 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz.
30-Oct-2025 13:06:12	2025-10-30 17:06:13 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas.
30-Oct-2025 13:06:12	2025-10-30 17:06:13 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial.
30-Oct-2025 13:06:12	2025-10-30 17:06:13 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350626/0.604424/0.974388
30-Oct-2025 13:06:12	2025-10-30 17:06:13 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial.
30-Oct-2025 13:06:14	2025-10-30 17:06:15 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.2542/59.3511/120.719
30-Oct-2025 13:06:14	2025-10-30 17:06:15 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial.
30-Oct-2025 13:06:14	2025-10-30 17:06:15 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.382806/0.598119/0.941571
30-Oct-2025 13:06:14	2025-10-30 17:06:15 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial.
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 20.0637/57.2112/118.101
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions.
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials.
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz.
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz.
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz.
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas.
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial.
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0750931/0.0978998/0.125897
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial.
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.72932/3.98787/5.33715
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial.
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0658572/0.0972125/0.140794
30-Oct-2025 13:06:17	2025-10-30 17:06:17 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial.
30-Oct-2025 13:06:17	2025-10-30 17:06:18 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.97943/3.97841/5.72903
30-Oct-2025 13:06:17	2025-10-30 17:06:18 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions.
30-Oct-2025 13:06:17	2025-10-30 17:06:18 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly
30-Oct-2025 13:06:17	2025-10-30 17:06:18 INFO Calibrater::solve Found good BPOLY solutions in 7 slots.
30-Oct-2025 13:06:17	2025-10-30 17:06:18 INFO calibrater::solve Finished solving.
30-Oct-2025 13:06:17	2025-10-30 17:06:18 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
30-Oct-2025 13:06:17	test_tool_calibrater.py::calibrater_test::test_solveBandpass
30-Oct-2025 13:06:17	Check that solve band poly creates the output table
30-Oct-2025 13:06:17	PASSED
30-Oct-2025 13:06:17
30-Oct-2025 13:06:17	2025-10-30 17:06:18 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
30-Oct-2025 13:06:17	2025-10-30 17:06:18 INFO calibrater::open **Using OLD VI-driven calibrater tool**
30-Oct-2025 13:06:17	2025-10-30 17:06:18 INFO calibrater::open Opening MS: ngc5921.ms for calibration.
30-Oct-2025 13:06:17	2025-10-30 17:06:18 INFO Clearing all model records in MS header.
30-Oct-2025 13:06:17	2025-10-30 17:06:18 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO VisSetUtil::initScrCols Initialized 22653 rows.
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO calibrater::setsolvegainspline Beginning setsolvegainspline--(MSSelection version)-------
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO Calibrater::setsolvegainspline Arranging to SOLVE:
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO Calibrater::setsolvegainspline . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO calibrater::solve Beginning solve-----------------------------
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO Calibrater::solve The following calibration terms are arranged for apply:
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO Calibrater::solve . (None)
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO Calibrater::solve The following calibration term is arranged for solve:
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO Calibrater::solve . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO GJonesSpline::solve() Fitting time-dependent cubic splines.
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO GJonesSpline::solve() Solving for phase splines with splinetime= 10800
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO GJonesSpline::solve() Solving for amplitude splines with splinetime= 10800
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO GJonesSpline::solve() Accumulating data for: field= 1331+30500002_0, spw= 0, nchan= 63
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO GJonesSpline::solve() Number of timestamps in data = 60
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec.
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO GJonesSpline::solve() Number of cubic spline control points = 4
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO GJonesSpline::solve() Number of cubic spline knots = 8
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO GJonesSpline::solve() Number of cubic spline segments = 1
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO GJonesSpline::solve() Fitting amplitude spline.
30-Oct-2025 13:06:18	test_tool_calibrater.py::calibrater_test::test_solveGainspline DPBTRF ;problem leading minor 23
30-Oct-2025 13:06:18	DPBTRF ;problem leading minor 23
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline.
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO GJonesSpline::solve() Fitting phase spline.
30-Oct-2025 13:06:18	DPBTRF ;problem leading minor 22
30-Oct-2025 13:06:18	DPBTRF ;problem leading minor 22
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline
30-Oct-2025 13:06:18	2025-10-30 17:06:18 INFO calibrater::solve Finished solving.
30-Oct-2025 13:06:18	2025-10-30 17:06:18 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
30-Oct-2025 13:06:18
30-Oct-2025 13:06:18	Check that solve gain spline creates the output table
30-Oct-2025 13:06:18	PASSED
30-Oct-2025 13:06:18
30-Oct-2025 13:06:18	2025-10-30 17:06:19 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:06:18	2025-10-30 17:06:19 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:06:18	2025-10-30 17:06:19 INFO Clearing all model records in MS header.
30-Oct-2025 13:06:18	2025-10-30 17:06:19 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:06:19	2025-10-30 17:06:20 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:06:20	2025-10-30 17:06:20 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:06:20	2025-10-30 17:06:20 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:06:20	2025-10-30 17:06:20 INFO calibrater::specifycal Beginning specifycal-----------------------
30-Oct-2025 13:06:20	2025-10-30 17:06:20 INFO Creating G Jones table from specified parameters.
30-Oct-2025 13:06:20	2025-10-30 17:06:20 INFO Generating 'G' corrections.
30-Oct-2025 13:06:20	2025-10-30 17:06:20 INFO Specified parameter(s) (per spw and pol) repeated on all antennas.
30-Oct-2025 13:06:20	2025-10-30 17:06:20 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations.
30-Oct-2025 13:06:20	2025-10-30 17:06:20 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9])
30-Oct-2025 13:06:20	2025-10-30 17:06:20 INFO Writing solutions to table: testcalout.cal
30-Oct-2025 13:06:20	2025-10-30 17:06:20 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:06:20	test_tool_calibrater.py::calibrater_test::test_specifyCal
30-Oct-2025 13:06:20	Check that specifycal can set values for specific spws and antennas
30-Oct-2025 13:06:20	PASSED
30-Oct-2025 13:06:20
30-Oct-2025 13:06:20	2025-10-30 17:06:21 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
30-Oct-2025 13:06:20	2025-10-30 17:06:21 INFO calibrater::open **Using OLD VI-driven calibrater tool**
30-Oct-2025 13:06:20	2025-10-30 17:06:21 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:06:20	2025-10-30 17:06:21 INFO Clearing all model records in MS header.
30-Oct-2025 13:06:20	2025-10-30 17:06:21 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:06:22	2025-10-30 17:06:22 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:06:22	2025-10-30 17:06:22 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:06:22	2025-10-30 17:06:22 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:06:22	2025-10-30 17:06:22 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
30-Oct-2025 13:06:22	2025-10-30 17:06:22 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
30-Oct-2025 13:06:22	2025-10-30 17:06:23 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:06:22	2025-10-30 17:06:23 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)-------
30-Oct-2025 13:06:22	2025-10-30 17:06:23 INFO Calibrater::setsolve Arranging to SOLVE:
30-Oct-2025 13:06:22	2025-10-30 17:06:23 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
30-Oct-2025 13:06:22	2025-10-30 17:06:23 INFO Calibrater::state The following calibration terms are arranged for apply:
30-Oct-2025 13:06:22	2025-10-30 17:06:23 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:06:22	2025-10-30 17:06:23 INFO Calibrater::state The following calibration term is arranged for solve:
30-Oct-2025 13:06:22	2025-10-30 17:06:23 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
30-Oct-2025 13:06:22	2025-10-30 17:06:23 INFO calibrater::solve Beginning solve-----------------------------
30-Oct-2025 13:06:22	2025-10-30 17:06:23 INFO Calibrater::solve The following calibration terms are arranged for apply:
30-Oct-2025 13:06:22	2025-10-30 17:06:23 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:06:22	2025-10-30 17:06:23 INFO Calibrater::solve The following calibration term is arranged for solve:
30-Oct-2025 13:06:22	2025-10-30 17:06:23 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
30-Oct-2025 13:06:22	2025-10-30 17:06:23 INFO Solving for Mf Mueller
30-Oct-2025 13:06:22	2025-10-30 17:06:23 INFO For solint = inf, found 84 solution intervals.
30-Oct-2025 13:06:24	2025-10-30 17:06:24 INFO Found good Mf Mueller solutions in 84 intervals.
30-Oct-2025 13:06:24	2025-10-30 17:06:24 INFO Writing solutions to table: output.ms
30-Oct-2025 13:06:24	2025-10-30 17:06:24 INFO calibrater::solve Finished solving.
30-Oct-2025 13:06:24	2025-10-30 17:06:24 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
30-Oct-2025 13:06:24	test_tool_calibrater.py::calibrater_test::test_standardPath
30-Oct-2025 13:06:24	open setapply setsolve state solve close
30-Oct-2025 13:06:24	PASSED
30-Oct-2025 13:06:24
30-Oct-2025 13:06:24	2025-10-30 17:06:25 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:06:24	2025-10-30 17:06:25 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:06:24	2025-10-30 17:06:25 INFO Clearing all model records in MS header.
30-Oct-2025 13:06:24	2025-10-30 17:06:25 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:06:25	2025-10-30 17:06:26 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO name:: No table opened.
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: The Table Cache has the following 16 entries:
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms"
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA"
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION"
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED"
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD"
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD"
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY"
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION"
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING"
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION"
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR"
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE"
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW"
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE"
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL"
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER"
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO name:: No table opened.
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO showcache:: The Table Cache is empty.
30-Oct-2025 13:06:26	2025-10-30 17:06:26 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:06:26	test_tool_calibrater.py::calibrater_test::test_takesMs
30-Oct-2025 13:06:26	Check that the calibrater tool can open and close an MS
30-Oct-2025 13:06:26	PASSED
30-Oct-2025 13:06:26
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO calibrater::open **Using NEW VI2-driven calibrater tool**
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO Clearing all model records in MS header.
30-Oct-2025 13:06:26	2025-10-30 17:06:26 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
30-Oct-2025 13:06:27	2025-10-30 17:06:28 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
30-Oct-2025 13:06:27	2025-10-30 17:06:28 INFO VisSetUtil::initScrCols Initialized 328860 rows.
30-Oct-2025 13:06:27	2025-10-30 17:06:28 INFO Calibrater:: Initializing nominal selection to the whole MS.
30-Oct-2025 13:06:27	2025-10-30 17:06:28 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
30-Oct-2025 13:06:27	2025-10-30 17:06:28 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
30-Oct-2025 13:06:28	2025-10-30 17:06:28 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:06:28	2025-10-30 17:06:28 INFO calibrater::correct Beginning correct---------------------------
30-Oct-2025 13:06:28	2025-10-30 17:06:28 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
30-Oct-2025 13:06:28	2025-10-30 17:06:28 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
30-Oct-2025 13:06:30	2025-10-30 17:06:31 INFO calibrater::correct Finished correcting.
30-Oct-2025 13:06:30	2025-10-30 17:06:31 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
30-Oct-2025 13:06:30	test_tool_calibrater.py::calibrater_test::test_writeToCorrected
30-Oct-2025 13:06:30	Check that the tool writes to the CORRECTED_DATA column
30-Oct-2025 13:06:30	PASSED
30-Oct-2025 13:06:30
30-Oct-2025 13:06:30	- generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -
30-Oct-2025 13:06:30	=================== 24 passed, 1 warning in 99.59s (0:01:39) ===================
30-Oct-2025 13:06:31	============================= test session starts ==============================
30-Oct-2025 13:06:31	platform linux -- Python 3.12.9, pytest-8.4.2, pluggy-1.6.0 -- /home/casatest/venv/bin/python3.12
30-Oct-2025 13:06:31	cachedir: .pytest_cache
30-Oct-2025 13:06:31	rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation
30-Oct-2025 13:06:31	configfile: pytest.ini
30-Oct-2025 13:06:31	collecting ... collected 8 items
30-Oct-2025 13:06:31
30-Oct-2025 13:06:31
30-Oct-2025 13:06:31	2025-10-30 17:06:32 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing NPTS using the classical algorithm around each of 10000 grid points in 2 planes.
30-Oct-2025 13:06:31	2025-10-30 17:06:32 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first
30-Oct-2025 13:06:31	2025-10-30 17:06:32 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 10000 grid points in 2 planes.
30-Oct-2025 13:06:32	2025-10-30 17:06:32 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first
30-Oct-2025 13:06:32	2025-10-30 17:06:32 INFO name:: No table opened.
30-Oct-2025 13:06:32	2025-10-30 17:06:32 INFO showcache:: The Table Cache is empty.
30-Oct-2025 13:06:32	2025-10-30 17:06:32 INFO name:: No table opened.
30-Oct-2025 13:06:32	2025-10-30 17:06:32 INFO name:: No table opened.
30-Oct-2025 13:06:32	test_tool_image_deviation.py::ia_deviation_test::test001
30-Oct-2025 13:06:32	Every pixel is a grid point
30-Oct-2025 13:06:32	PASSED
30-Oct-2025 13:06:32
30-Oct-2025 13:06:32	2025-10-30 17:06:32 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing NPTS using the classical algorithm around each of 10000 grid points in 2 planes.
30-Oct-2025 13:06:32	2025-10-30 17:06:32 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first
30-Oct-2025 13:06:32	2025-10-30 17:06:32 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 10000 grid points in 2 planes.
30-Oct-2025 13:06:32	2025-10-30 17:06:33 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first
30-Oct-2025 13:06:32	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:32	2025-10-30 17:06:33 INFO showcache:: The Table Cache is empty.
30-Oct-2025 13:06:32	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:32	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:32	test_tool_image_deviation.py::ia_deviation_test::test002
30-Oct-2025 13:06:32	Every pixel is a grid point with an offset, so should be the same result
30-Oct-2025 13:06:32	as test001
30-Oct-2025 13:06:32	PASSED
30-Oct-2025 13:06:32
30-Oct-2025 13:06:32	2025-10-30 17:06:33 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing NPTS using the classical algorithm around each of 1156 grid points in 2 planes.
30-Oct-2025 13:06:32	2025-10-30 17:06:33 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm.
30-Oct-2025 13:06:32	2025-10-30 17:06:33 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first
30-Oct-2025 13:06:32	2025-10-30 17:06:33 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 1156 grid points in 2 planes.
30-Oct-2025 13:06:32	2025-10-30 17:06:33 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm.
30-Oct-2025 13:06:32	2025-10-30 17:06:33 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first
30-Oct-2025 13:06:32	2025-10-30 17:06:33 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first
30-Oct-2025 13:06:32	2025-10-30 17:06:33 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing NPTS using the classical algorithm around each of 1156 grid points in 2 planes.
30-Oct-2025 13:06:32	2025-10-30 17:06:33 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm.
30-Oct-2025 13:06:32	2025-10-30 17:06:33 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first
30-Oct-2025 13:06:32	2025-10-30 17:06:33 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 1156 grid points in 2 planes.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO showcache:: The Table Cache is empty.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	test_tool_image_deviation.py::ia_deviation_test::test003
30-Oct-2025 13:06:33	Every third pixel is a grid point
30-Oct-2025 13:06:33	PASSED
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing NPTS using the classical algorithm around each of 1089 grid points in 2 planes.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 1089 grid points in 2 planes.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing NPTS using the classical algorithm around each of 1089 grid points in 2 planes.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 1089 grid points in 2 planes.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO showcache:: The Table Cache is empty.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	test_tool_image_deviation.py::ia_deviation_test::test005
30-Oct-2025 13:06:33	Every third pixel is a grid point, using anchor [2,2]
30-Oct-2025 13:06:33	PASSED
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 10.001 pix x 10.001 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 11 pix x 11 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 64 grid points in 2 planes.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO ImageRegion::fromRecord Selected bounding box :
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO ImageRegion::fromRecord+ [5, 5, 0] to [85, 85, 1] (00:03:00.021, -00.45.00.077, I to 23:57:39.990, +00.35.00.036, Q)
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 10.001 pix x 10.001 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 11 pix x 11 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 36 grid points in 2 planes.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO ImageRegion::fromRecord Selected bounding box :
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO ImageRegion::fromRecord+ [27, 27, 0] to [66, 66, 0] (00:01:32.003, -00.23.00.010, I to 23:58:55.999, +00.16.00.003, I)
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO ImageRegion::fromRecord Selected bounding box :
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO ImageRegion::fromRecord+ [22, 22, 0] to [61, 61, 0] (00:01:32.003, -00.23.00.010, I to 23:58:55.999, +00.16.00.003, I)
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO showcache:: The Table Cache is empty.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	test_tool_image_deviation.py::ia_deviation_test::test006
30-Oct-2025 13:06:33	Test that regions work as expected
30-Oct-2025 13:06:33	PASSED
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO ImageFactory::createImage Created Paged image 'mycirc.im' of shape [100, 100] with float valued pixels.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::useReferencePixelAsAnchor Anchor being set at pixel [50,50], at/near image reference pixel.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_computeStat Using circular region of radius 20 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 41 pix x 41 pix and there are 1257 good pixels in the circle that are being used) to choose pixels for computing SUM using the classical algorithm around each of 25 grid points in 1 planes.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_doInterpolation Interpolate using CUBIC algorithm.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO showcache:: The Table Cache is empty.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	test_tool_image_deviation.py::ia_deviation_test::test_circle
30-Oct-2025 13:06:33	test circles work correctly CAS-10296
30-Oct-2025 13:06:33	PASSED
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO ImageFactory::createImage Created Temp image of shape [10, 10] with float valued pixels.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 9 grid points in 1 planes.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO ImageMaskAttacher::makeMask Created mask `mask0'
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO ImageFactory::createImage Created Temp image of shape [10, 10, 2] with float valued pixels.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 9 grid points in 2 planes.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO ImageMaskAttacher::makeMask Created mask `mask0'
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO showcache:: The Table Cache is empty.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	test_tool_image_deviation.py::ia_deviation_test::test_mask
30-Oct-2025 13:06:33	PASSED
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO ImageFactory::createImage Created Temp image of shape [20, 20] with float valued pixels.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 25 grid points in 1 planes.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_doInterpolation Interpolate using CUBIC algorithm.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::useReferencePixelAsAnchor Anchor being set at pixel [10,10], at/near image reference pixel.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 25 grid points in 1 planes.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO StatImageCreator::_doInterpolation Interpolate using CUBIC algorithm.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO showcache:: The Table Cache is empty.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	2025-10-30 17:06:33 INFO name:: No table opened.
30-Oct-2025 13:06:33	test_tool_image_deviation.py::ia_deviation_test::test_refpix
30-Oct-2025 13:06:33	Test using reference pixel
30-Oct-2025 13:06:33	PASSED
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	- generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_deviation/nose.xml -
30-Oct-2025 13:06:33	========================= 8 passed, 1 warning in 2.29s =========================
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calanalysis
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calanalysis/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calanalysis/
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_statwt/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics/
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_statistics/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics/
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_transpose/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse/
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_collapse/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse/
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic/
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_linearmosaic/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic/
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_regionmanager/
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_regionmanager
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_regionmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_regionmanager/
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_table/
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_table
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_table/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_table/
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image/
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image/
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner/
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msuvbinner/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner/
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys/
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_coordsys/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys/
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_rebin/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_componentlist/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger/
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_agentflagger/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger/
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid/
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_regrid/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid/
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta/
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_quanta/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta/
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation/
30-Oct-2025 13:06:33	Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation
30-Oct-2025 13:06:33
30-Oct-2025 13:06:33	Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_deviation/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation/
30-Oct-2025 13:06:34	total 77100
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci 15001 136778 Oct 30 16:52 casatestutils-6.7.3.2a100.dev0+dirty-py3-none-any.whl
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci 15001 78640378 Oct 30 16:52 casatools-6.7.3.2a100.dev0+dirty-cp312-cp312-manylinux_2_28_x86_64.whl
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 4340 Oct 30 17:06 test_tool_agentflagger.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 1006 Oct 30 17:06 test_tool_calanalysis.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 2657 Oct 30 17:06 test_tool_calibrater.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 687 Oct 30 17:06 test_tool_componentlist.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 7467 Oct 30 17:06 test_tool_coordsys.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 12935 Oct 30 17:06 test_tool_image.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 2220 Oct 30 17:06 test_tool_image_collapse.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 1048 Oct 30 17:06 test_tool_image_deviation.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 2575 Oct 30 17:06 test_tool_image_fitprofile.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 1178 Oct 30 17:06 test_tool_image_pbcor.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 883 Oct 30 17:06 test_tool_image_pv.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 1006 Oct 30 17:06 test_tool_image_rebin.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 1336 Oct 30 17:06 test_tool_image_regrid.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 1533 Oct 30 17:06 test_tool_image_statistics.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 765 Oct 30 17:06 test_tool_image_subimage.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 890 Oct 30 17:06 test_tool_image_transpose.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 1966 Oct 30 17:06 test_tool_imagepol.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 839 Oct 30 17:06 test_tool_linearmosaic.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 668 Oct 30 17:06 test_tool_logsink.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 549 Oct 30 17:06 test_tool_measures.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 5224 Oct 30 17:06 test_tool_ms.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 367 Oct 30 17:06 test_tool_ms_createmultims.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 2095 Oct 30 17:06 test_tool_ms_statwt.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 8633 Oct 30 17:06 test_tool_msmetadata.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 359 Oct 30 17:06 test_tool_msuvbinner.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 1171 Oct 30 17:06 test_tool_quanta.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 3977 Oct 30 17:06 test_tool_regionmanager.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 2072 Oct 30 17:06 test_tool_sdm.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 2096 Oct 30 17:06 test_tool_sdm_toms.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 670 Oct 30 17:06 test_tool_simulator.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 1716 Oct 30 17:06 test_tool_synthesisutils.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 1462 Oct 30 17:06 test_tool_table.xml
30-Oct-2025 13:06:34	-rw-r--r-- 1 casaci root 1717 Oct 30 17:06 test_tool_vpmanager.xml
30-Oct-2025 13:06:34	Finished task 'Test wheel' with result: Success
30-Oct-2025 13:06:34	Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit'
30-Oct-2025 13:06:34	Parsing test results under /export/home/cbt-el7-6/bamboohome/xml-data/build-dir/CASASPECS-CI190-TTOML228...
30-Oct-2025 13:06:34	Finished task 'Parse tests' with result: Success
30-Oct-2025 13:06:34	Starting task 'Cleanup' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script'
30-Oct-2025 13:06:34	Beginning to execute external process for build 'CASASPECS - CI Build - CAS-14695 - Test Tools Many Linux 2.28 #1 (CASASPECS-CI190-TTOML228-1)' ... running command line: /export/home/cbt-el7-6/bamboohome/temp/CASASPECS-CI190-TTOML228-1-ScriptBuildTask-6646030628682649493.sh ... in: /export/home/cbt-el7-6/bamboohome/xml-data/build-dir/CASASPECS-CI190-TTOML228
30-Oct-2025 13:06:34	Starting cleanup
30-Oct-2025 13:06:45	wheel-container-test
30-Oct-2025 13:06:46	wheel-container-test
30-Oct-2025 13:06:46	Cleanup complete
30-Oct-2025 13:06:46	Finished task 'Cleanup' with result: Success
30-Oct-2025 13:06:46	Running post build plugin 'Docker Container Cleanup'
30-Oct-2025 13:06:46	Beginning to execute external process for build 'CASASPECS - CI Build - CAS-14695 - Test Tools Many Linux 2.28 #1 (CASASPECS-CI190-TTOML228-1)' ... running command line: /usr/bin/docker rm -f wheel-container-test ... in: /export/home/cbt-el7-6/bamboohome/xml-data/build-dir/CASASPECS-CI190-TTOML228
30-Oct-2025 13:06:46	Error response from daemon: No such container: wheel-container-test
30-Oct-2025 13:06:46	Running post build plugin 'NCover Results Collector'
30-Oct-2025 13:06:46	Running post build plugin 'Build Results Label Collector'
30-Oct-2025 13:06:46	Running post build plugin 'Clover Results Collector'
30-Oct-2025 13:06:46	Running post build plugin 'npm Cache Cleanup'
30-Oct-2025 13:06:46	Running post build plugin 'Artifact Copier'
30-Oct-2025 13:06:46	Publishing an artifact: Tests
30-Oct-2025 13:06:47	Finished publishing of artifact Non required job artifact Http Compression On : [Tests], patterns: [*.xml] anchored at: [wheeldirectory/] in 390.7 ms
30-Oct-2025 13:06:47	Publishing an artifact: xml Directories
30-Oct-2025 13:06:47	Finished publishing of artifact Non required job artifact Http Compression On : [xml Directories], patterns: [*/.xml] anchored at: [wheeldirectory/] in 149.3 ms
30-Oct-2025 13:06:47	Finalising the build...
30-Oct-2025 13:06:47	Stopping timer.
30-Oct-2025 13:06:47	Build CASASPECS-CI190-TTOML228-1 completed.
30-Oct-2025 13:06:47	Running on server: post build plugin 'Build Hanging Detection Configuration'
30-Oct-2025 13:06:47	Running on server: post build plugin 'NCover Results Collector'
30-Oct-2025 13:06:47	Running on server: post build plugin 'Build Labeller'
30-Oct-2025 13:06:47	Running on server: post build plugin 'Clover Delta Calculator'
30-Oct-2025 13:06:47	Running on server: post build plugin 'Maven Dependencies Postprocessor'
30-Oct-2025 13:06:47	All post build plugins have finished
30-Oct-2025 13:06:47	Generating build results summary...
30-Oct-2025 13:06:48	Saving build results to disk...
30-Oct-2025 13:06:48	Store variable context...
30-Oct-2025 13:06:48	Finished building CASASPECS-CI190-TTOML228-1.

Build: #1 was successful

Job: Test Tools Many Linux 2.28 was successful

Stages & jobs

Default Stage

Test

Build log

Build #1

Build: #1 was successful

Job: Test Tools Many Linux 2.28 was successful

Stages & jobs

Default Stage

Test

Build log