Build: #3 was successful
Job: Test Tools Many Linux 2.28 was successful
Build log
The build generated 53,147 lines of output. The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
| 17-Oct-2025 13:40:51 | Test 16: define Airy beam for ALMA, save it, load it, then use it |
| 17-Oct-2025 13:40:51 | PASSED |
| 17-Oct-2025 13:40:51 | |
| 17-Oct-2025 13:40:51 | test_tool_vpmanager.py::vpmanager_test::test2 |
| 17-Oct-2025 13:40:51 | Test 2: getvp for VLA |
| 17-Oct-2025 13:40:51 | PASSED |
| 17-Oct-2025 13:40:51 | |
| 17-Oct-2025 13:40:51 | test_tool_vpmanager.py::vpmanager_test::test3 |
| 17-Oct-2025 13:40:51 | Test 3: getvp and getvps for ALMA |
| 17-Oct-2025 13:40:51 | PASSED |
| 17-Oct-2025 13:40:51 | |
| 17-Oct-2025 13:40:51 | test_tool_vpmanager.py::vpmanager_test::test4 |
| 17-Oct-2025 13:40:51 | Test 4: numvps for VLA |
| 17-Oct-2025 13:40:51 | PASSED |
| 17-Oct-2025 13:40:51 | |
| 17-Oct-2025 13:40:51 | test_tool_vpmanager.py::vpmanager_test::test5 |
| 17-Oct-2025 13:40:51 | Test 5: numvps for ALMA |
| 17-Oct-2025 13:40:51 | PASSED |
| 17-Oct-2025 13:40:51 | |
| 17-Oct-2025 13:40:51 | test_tool_vpmanager.py::vpmanager_test::test6 |
| 17-Oct-2025 13:40:51 | Test 6: numvps for ALMA with too high freq |
| 17-Oct-2025 13:40:51 | PASSED |
| 17-Oct-2025 13:40:51 | |
| 17-Oct-2025 13:40:51 | test_tool_vpmanager.py::vpmanager_test::test7 |
| 17-Oct-2025 13:40:51 | Test 7: setuserdefault for ALMA |
| 17-Oct-2025 13:40:51 | PASSED |
| 17-Oct-2025 13:40:51 | |
| 17-Oct-2025 13:40:51 | test_tool_vpmanager.py::vpmanager_test::test8 |
| 17-Oct-2025 13:40:51 | Test 8: define Airy beam for ALMA, then use it |
| 17-Oct-2025 13:40:51 | PASSED |
| 17-Oct-2025 13:40:51 | |
| 17-Oct-2025 13:40:51 | test_tool_vpmanager.py::vpmanager_test::test9 Processing request for geometries from observatory ALMA, antenna type DV |
| 17-Oct-2025 13:40:51 | 2025-10-17 17:40:52 INFO BeamCalc::setBeamCalcGeometries() Initialisation of geometries for observatory ALMA, antenna type DV |
| 17-Oct-2025 13:40:51 | 2025-10-17 17:40:52 INFO BeamCalc::setBeamCalcGeometries() from file /opt/casa/data/master/alma/responses/ALMA_0_DV__0_0_360_0_45_90_31_506_950_GHz_beamcalc_INTERNAL.txt |
| 17-Oct-2025 13:40:51 | 2025-10-17 17:40:52 INFO BeamCalc::setBeamCalcGeometries()+ ... successful. |
| 17-Oct-2025 13:40:51 | **Writing ALMA Apertures for Pol 9 to disk |
| 17-Oct-2025 13:40:51 | Done writing apertures to disk |
| 17-Oct-2025 13:40:52 | 2025-10-17 17:40:52 INFO BeamCalc::setBeamCalcGeometries() Initialisation of geometries for observatory ALMA, antenna type DA |
| 17-Oct-2025 13:40:52 | Processing request for geometries from observatory ALMA, antenna type DA |
| 17-Oct-2025 13:40:52 | 2025-10-17 17:40:52 INFO BeamCalc::setBeamCalcGeometries() from file /opt/casa/data/master/alma/responses/ALMA_0_DA__0_0_360_0_45_90_31_506_950_GHz_beamcalc_INTERNAL.txt |
| 17-Oct-2025 13:40:52 | 2025-10-17 17:40:52 INFO BeamCalc::setBeamCalcGeometries()+ ... successful. |
| 17-Oct-2025 13:40:52 | **Writing ALMA Apertures for Pol 9 to disk |
| 17-Oct-2025 13:40:52 | Done writing apertures to disk |
| 17-Oct-2025 13:40:53 | 2025-10-17 17:40:53 INFO BeamCalc::setBeamCalcGeometries() Initialisation of geometries for observatory ALMA, antenna type PM |
| 17-Oct-2025 13:40:53 | Processing request for geometries from observatory ALMA, antenna type PM |
| 17-Oct-2025 13:40:53 | 2025-10-17 17:40:53 INFO BeamCalc::setBeamCalcGeometries() from file /opt/casa/data/master/alma/responses/ALMA_0_PM__0_0_360_0_45_90_31_506_950_GHz_beamcalc_INTERNAL.txt |
| 17-Oct-2025 13:40:53 | 2025-10-17 17:40:53 INFO BeamCalc::setBeamCalcGeometries()+ ... successful. |
| 17-Oct-2025 13:40:53 | **Writing ALMA Apertures for Pol 9 to disk |
| 17-Oct-2025 13:40:53 | Done writing apertures to disk |
| 17-Oct-2025 13:40:53 | Processing request for geometries from observatory ALMA, antenna type CM |
| 17-Oct-2025 13:40:53 | 2025-10-17 17:40:54 INFO BeamCalc::setBeamCalcGeometries() Initialisation of geometries for observatory ALMA, antenna type CM |
| 17-Oct-2025 13:40:53 | 2025-10-17 17:40:54 INFO BeamCalc::setBeamCalcGeometries() from file /opt/casa/data/master/alma/responses/ALMA_0_CM__0_0_360_0_45_90_31_506_950_GHz_beamcalc_INTERNAL.txt |
| 17-Oct-2025 13:40:53 | 2025-10-17 17:40:54 INFO BeamCalc::setBeamCalcGeometries()+ ... successful. |
| 17-Oct-2025 13:40:53 | **Writing ALMA Apertures for Pol 9 to disk |
| 17-Oct-2025 13:40:53 | Done writing apertures to disk |
| 17-Oct-2025 13:40:54 | |
| 17-Oct-2025 13:40:54 | Test 9: define reference to antresp table for ALMA, then use it |
| 17-Oct-2025 13:40:54 | PASSED |
| 17-Oct-2025 13:40:54 | |
| 17-Oct-2025 13:40:54 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_vpmanager/nose.xml - |
| 17-Oct-2025 13:40:54 | ======================== 17 passed, 1 warning in 4.06s ========================= |
| 17-Oct-2025 13:40:54 | ============================= test session starts ============================== |
| 17-Oct-2025 13:40:54 | platform linux -- Python 3.12.9, pytest-8.4.2, pluggy-1.6.0 -- /home/casatest/venv/bin/python3.12 |
| 17-Oct-2025 13:40:54 | cachedir: .pytest_cache |
| 17-Oct-2025 13:40:54 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater |
| 17-Oct-2025 13:40:54 | configfile: pytest.ini |
| 17-Oct-2025 13:40:55 | collecting ... collected 24 items |
| 17-Oct-2025 13:40:55 | |
| 17-Oct-2025 13:40:55 | |
| 17-Oct-2025 13:40:56 | 2025-10-17 17:40:56 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:40:56 | 2025-10-17 17:40:56 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:40:56 | 2025-10-17 17:40:56 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:40:56 | 2025-10-17 17:40:56 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:40:57 | 2025-10-17 17:40:58 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:40:58 | 2025-10-17 17:40:58 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:40:58 | 2025-10-17 17:40:58 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:40:58 | 2025-10-17 17:40:58 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Oct-2025 13:40:58 | 2025-10-17 17:40:58 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Oct-2025 13:40:58 | 2025-10-17 17:40:58 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:40:58 | 2025-10-17 17:40:58 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 17-Oct-2025 13:40:58 | 2025-10-17 17:40:58 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:40:58 | 2025-10-17 17:40:58 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:00 | 2025-10-17 17:41:01 INFO calibrater::corrupt Finished corrupting. |
| 17-Oct-2025 13:41:00 | 2025-10-17 17:41:01 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:41:00 | test_tool_calibrater.py::calibrater_test::test_activityRecord |
| 17-Oct-2025 13:41:00 | Check that using the calibrater to modify the vis shows in the activity record |
| 17-Oct-2025 13:41:00 | PASSED |
| 17-Oct-2025 13:41:00 | |
| 17-Oct-2025 13:41:01 | 2025-10-17 17:41:01 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:41:01 | 2025-10-17 17:41:01 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:41:01 | 2025-10-17 17:41:01 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:41:01 | 2025-10-17 17:41:01 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:41:02 | 2025-10-17 17:41:03 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:41:02 | 2025-10-17 17:41:03 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:41:02 | 2025-10-17 17:41:03 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:41:02 | 2025-10-17 17:41:03 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Oct-2025 13:41:02 | 2025-10-17 17:41:03 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Oct-2025 13:41:03 | 2025-10-17 17:41:03 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:03 | 2025-10-17 17:41:03 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 17-Oct-2025 13:41:03 | 2025-10-17 17:41:03 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:41:03 | 2025-10-17 17:41:03 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:05 | 2025-10-17 17:41:06 INFO calibrater::corrupt Finished corrupting. |
| 17-Oct-2025 13:41:07 | 2025-10-17 17:41:08 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:41:07 | test_tool_calibrater.py::calibrater_test::test_corruptCal |
| 17-Oct-2025 13:41:07 | Check that the MS is corrupted using the cal table |
| 17-Oct-2025 13:41:07 | PASSED |
| 17-Oct-2025 13:41:07 | |
| 17-Oct-2025 13:41:08 | 2025-10-17 17:41:08 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:41:08 | 2025-10-17 17:41:08 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:41:08 | 2025-10-17 17:41:08 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:41:08 | 2025-10-17 17:41:08 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:41:09 | 2025-10-17 17:41:10 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:41:09 | 2025-10-17 17:41:10 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:41:09 | 2025-10-17 17:41:10 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:41:09 | 2025-10-17 17:41:10 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:41:10 | test_tool_calibrater.py::calibrater_test::test_createEmpty |
| 17-Oct-2025 13:41:10 | Check that an empty cal table can be created |
| 17-Oct-2025 13:41:10 | PASSED |
| 17-Oct-2025 13:41:10 | |
| 17-Oct-2025 13:41:10 | 2025-10-17 17:41:10 INFO name:: No table opened. |
| 17-Oct-2025 13:41:10 | 2025-10-17 17:41:10 INFO showcache:: The Table Cache is empty. |
| 17-Oct-2025 13:41:10 | 2025-10-17 17:41:10 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:41:10 | 2025-10-17 17:41:10 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:41:10 | 2025-10-17 17:41:10 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:41:10 | 2025-10-17 17:41:10 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO name:: No table opened. |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO showcache:: The Table Cache has the following 16 entries: |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 17-Oct-2025 13:41:11 | 2025-10-17 17:41:12 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:41:12 | test_tool_calibrater.py::calibrater_test::test_done |
| 17-Oct-2025 13:41:12 | Check that done closes the active calibrator tool |
| 17-Oct-2025 13:41:12 | PASSED |
| 17-Oct-2025 13:41:12 | |
| 17-Oct-2025 13:41:12 | 2025-10-17 17:41:12 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 17-Oct-2025 13:41:12 | 2025-10-17 17:41:12 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 17-Oct-2025 13:41:12 | 2025-10-17 17:41:12 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:41:12 | 2025-10-17 17:41:12 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:41:12 | 2025-10-17 17:41:12 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:41:13 | 2025-10-17 17:41:14 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:41:13 | 2025-10-17 17:41:14 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:41:13 | 2025-10-17 17:41:14 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:41:13 | 2025-10-17 17:41:14 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Oct-2025 13:41:13 | 2025-10-17 17:41:14 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Oct-2025 13:41:14 | 2025-10-17 17:41:14 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:14 | 2025-10-17 17:41:14 INFO calibrater::correct Beginning correct--------------------------- |
| 17-Oct-2025 13:41:14 | 2025-10-17 17:41:14 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:41:14 | 2025-10-17 17:41:14 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:17 | 2025-10-17 17:41:17 INFO calibrater::correct Finished correcting. |
| 17-Oct-2025 13:41:17 | 2025-10-17 17:41:18 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 17-Oct-2025 13:41:17 | 2025-10-17 17:41:18 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:41:17 | 2025-10-17 17:41:18 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:41:17 | 2025-10-17 17:41:18 INFO calibrater::initcalset Beginning initcalset------------------------ |
| 17-Oct-2025 13:41:17 | 2025-10-17 17:41:18 INFO VisSet::VisSet Initializing MODEL_DATA (to unity) and CORRECTED_DATA (to DATA) |
| 17-Oct-2025 13:41:18 | 2025-10-17 17:41:18 INFO VisSet::VisSet Initialized 328860 rows. |
| 17-Oct-2025 13:41:19 | 2025-10-17 17:41:19 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 17-Oct-2025 13:41:19 | test_tool_calibrater.py::calibrater_test::test_reinitModel |
| 17-Oct-2025 13:41:19 | Check that initcalset will reset the CORRECTED_DATA to unity |
| 17-Oct-2025 13:41:19 | PASSED |
| 17-Oct-2025 13:41:19 | |
| 17-Oct-2025 13:41:19 | 2025-10-17 17:41:20 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:41:19 | 2025-10-17 17:41:20 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:41:19 | 2025-10-17 17:41:20 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:41:19 | 2025-10-17 17:41:20 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:41:20 | 2025-10-17 17:41:21 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 INFO Calibrater::setsolve Arranging to SOLVE: |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 INFO Calibrater::setsolve . Mf Mueller: table=gaincaltest2.ms.G0 append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 INFO calibrater::reset Reseting solve/apply state |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 INFO calibrater::solve Beginning solve----------------------------- |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 SEVERE Calibrater::solve Caught exception: Please run setsolve before attempting to solve. |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 INFO Calibrater::solve Reseting entire solve/apply state. |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 SEVERE Exception Reported: Error in Calibrater::solve. |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 INFO calibrater::correct Beginning correct--------------------------- |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 INFO Calibrater::correct2 (VI2/VB2) . (None) |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 SEVERE Calibrater::correct2 (VI2/VB2) Caught exception: Nothing to Apply |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 INFO Calibrater::correct2 (VI2/VB2) Resetting all calibration application settings. |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 SEVERE Exception Reported: Error in Calibrater::correct. |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:21 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:41:21 | test_tool_calibrater.py::calibrater_test::test_resetSolveApply |
| 17-Oct-2025 13:41:21 | Check that the reset function can clear set apply and solves |
| 17-Oct-2025 13:41:21 | PASSED |
| 17-Oct-2025 13:41:21 | |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:22 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:22 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:22 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:41:21 | 2025-10-17 17:41:22 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:41:22 | 2025-10-17 17:41:23 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:41:23 | 2025-10-17 17:41:23 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:41:23 | 2025-10-17 17:41:23 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:41:23 | 2025-10-17 17:41:24 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 17-Oct-2025 13:41:23 | 2025-10-17 17:41:24 INFO calibrater::reset Reseting solve/apply state |
| 17-Oct-2025 13:41:23 | 2025-10-17 17:41:24 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 17-Oct-2025 13:41:23 | 2025-10-17 17:41:24 INFO Calibrater::selectvis+ Selecting on spw: '1' |
| 17-Oct-2025 13:41:23 | 2025-10-17 17:41:24 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
| 17-Oct-2025 13:41:23 | 2025-10-17 17:41:24 INFO Calibrater::selectvis Frequency selection: |
| 17-Oct-2025 13:41:23 | 2025-10-17 17:41:24 INFO Calibrater::selectvis . Spw 1:0~7 (8 channels, step by 1) |
| 17-Oct-2025 13:41:23 | 2025-10-17 17:41:24 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 17-Oct-2025 13:41:24 | 2025-10-17 17:41:24 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:41:24 | test_tool_calibrater.py::calibrater_test::test_returnDict |
| 17-Oct-2025 13:41:24 | Check that the returndict function gives a dictonary with the expected keys |
| 17-Oct-2025 13:41:24 | PASSED |
| 17-Oct-2025 13:41:24 | |
| 17-Oct-2025 13:41:24 | 2025-10-17 17:41:25 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:41:24 | 2025-10-17 17:41:25 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:41:24 | 2025-10-17 17:41:25 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:41:25 | 2025-10-17 17:41:25 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:41:26 | 2025-10-17 17:41:26 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:41:26 | 2025-10-17 17:41:27 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:41:26 | 2025-10-17 17:41:27 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:41:26 | 2025-10-17 17:41:27 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 17-Oct-2025 13:41:26 | 2025-10-17 17:41:27 INFO calibrater::reset Reseting solve/apply state |
| 17-Oct-2025 13:41:26 | 2025-10-17 17:41:27 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 17-Oct-2025 13:41:26 | 2025-10-17 17:41:27 INFO Calibrater::selectvis+ Selecting on antenna/baseline: '0' |
| 17-Oct-2025 13:41:26 | 2025-10-17 17:41:27 INFO Calibrater::selectvis By selection 328860 rows are reduced to 65772 |
| 17-Oct-2025 13:41:26 | 2025-10-17 17:41:27 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 17-Oct-2025 13:41:26 | 2025-10-17 17:41:27 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 17-Oct-2025 13:41:26 | 2025-10-17 17:41:27 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Oct-2025 13:41:26 | 2025-10-17 17:41:27 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Oct-2025 13:41:26 | 2025-10-17 17:41:27 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:26 | 2025-10-17 17:41:27 INFO calibrater::correct Beginning correct--------------------------- |
| 17-Oct-2025 13:41:26 | 2025-10-17 17:41:27 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:41:26 | 2025-10-17 17:41:27 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:28 | 2025-10-17 17:41:29 INFO calibrater::correct Finished correcting. |
| 17-Oct-2025 13:41:29 | 2025-10-17 17:41:29 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:41:29 | test_tool_calibrater.py::calibrater_test::test_selectVisBaseline |
| 17-Oct-2025 13:41:29 | Check that selectvis properly selects baseline/antenna |
| 17-Oct-2025 13:41:29 | 65772 65772 |
| 17-Oct-2025 13:41:29 | 263088 263088 |
| 17-Oct-2025 13:41:29 | PASSED |
| 17-Oct-2025 13:41:29 | |
| 17-Oct-2025 13:41:30 | 2025-10-17 17:41:30 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:41:30 | 2025-10-17 17:41:30 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:41:30 | 2025-10-17 17:41:30 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:41:30 | 2025-10-17 17:41:30 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:41:31 | 2025-10-17 17:41:31 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:41:31 | 2025-10-17 17:41:32 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:41:31 | 2025-10-17 17:41:32 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:41:31 | 2025-10-17 17:41:32 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 17-Oct-2025 13:41:31 | 2025-10-17 17:41:32 INFO calibrater::reset Reseting solve/apply state |
| 17-Oct-2025 13:41:31 | 2025-10-17 17:41:32 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 17-Oct-2025 13:41:31 | 2025-10-17 17:41:32 INFO Calibrater::selectvis+ Selecting on field: '0' |
| 17-Oct-2025 13:41:31 | 2025-10-17 17:41:32 INFO Calibrater::selectvis By selection 328860 rows are reduced to 172260 |
| 17-Oct-2025 13:41:31 | 2025-10-17 17:41:32 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 17-Oct-2025 13:41:31 | 2025-10-17 17:41:32 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 17-Oct-2025 13:41:31 | 2025-10-17 17:41:32 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Oct-2025 13:41:31 | 2025-10-17 17:41:32 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Oct-2025 13:41:31 | 2025-10-17 17:41:32 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:31 | 2025-10-17 17:41:32 INFO calibrater::correct Beginning correct--------------------------- |
| 17-Oct-2025 13:41:31 | 2025-10-17 17:41:32 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:41:31 | 2025-10-17 17:41:32 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:33 | 2025-10-17 17:41:33 INFO calibrater::correct Finished correcting. |
| 17-Oct-2025 13:41:34 | 2025-10-17 17:41:34 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:41:34 | test_tool_calibrater.py::calibrater_test::test_selectVisField |
| 17-Oct-2025 13:41:34 | Check that the field is properly selected by selectvis |
| 17-Oct-2025 13:41:34 | PASSED |
| 17-Oct-2025 13:41:34 | |
| 17-Oct-2025 13:41:34 | 2025-10-17 17:41:35 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:41:34 | 2025-10-17 17:41:35 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:41:34 | 2025-10-17 17:41:35 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:41:34 | 2025-10-17 17:41:35 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:41:36 | 2025-10-17 17:41:36 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:41:36 | 2025-10-17 17:41:36 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:41:36 | 2025-10-17 17:41:36 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:41:36 | 2025-10-17 17:41:36 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 17-Oct-2025 13:41:36 | 2025-10-17 17:41:36 INFO calibrater::reset Reseting solve/apply state |
| 17-Oct-2025 13:41:36 | 2025-10-17 17:41:36 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 17-Oct-2025 13:41:36 | 2025-10-17 17:41:36 INFO Calibrater::selectvis+ Selecting on intent: '*AMPLI*' |
| 17-Oct-2025 13:41:36 | 2025-10-17 17:41:36 INFO Calibrater::selectvis Selection did not drop any rows |
| 17-Oct-2025 13:41:36 | 2025-10-17 17:41:36 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 17-Oct-2025 13:41:36 | 2025-10-17 17:41:36 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 17-Oct-2025 13:41:36 | 2025-10-17 17:41:36 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Oct-2025 13:41:36 | 2025-10-17 17:41:36 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Oct-2025 13:41:36 | 2025-10-17 17:41:37 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:36 | 2025-10-17 17:41:37 INFO calibrater::correct Beginning correct--------------------------- |
| 17-Oct-2025 13:41:36 | 2025-10-17 17:41:37 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:41:36 | 2025-10-17 17:41:37 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:39 | 2025-10-17 17:41:40 INFO calibrater::correct Finished correcting. |
| 17-Oct-2025 13:41:39 | 2025-10-17 17:41:40 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:41:39 | test_tool_calibrater.py::calibrater_test::test_selectVisIntent |
| 17-Oct-2025 13:41:39 | Check that the intent is properly selected by selectvis |
| 17-Oct-2025 13:41:39 | PASSED |
| 17-Oct-2025 13:41:39 | |
| 17-Oct-2025 13:41:40 | 2025-10-17 17:41:41 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:41:40 | 2025-10-17 17:41:41 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:41:40 | 2025-10-17 17:41:41 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:41:40 | 2025-10-17 17:41:41 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:41:42 | 2025-10-17 17:41:42 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:41:42 | 2025-10-17 17:41:42 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:41:42 | 2025-10-17 17:41:42 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:41:42 | 2025-10-17 17:41:42 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 17-Oct-2025 13:41:42 | 2025-10-17 17:41:42 INFO calibrater::reset Reseting solve/apply state |
| 17-Oct-2025 13:41:42 | 2025-10-17 17:41:42 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 17-Oct-2025 13:41:42 | 2025-10-17 17:41:42 INFO Calibrater::selectvis+ Selecting by observation IDs: '0' |
| 17-Oct-2025 13:41:42 | 2025-10-17 17:41:42 INFO Calibrater::selectvis By selection 328860 rows are reduced to 318870 |
| 17-Oct-2025 13:41:42 | 2025-10-17 17:41:42 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 17-Oct-2025 13:41:42 | 2025-10-17 17:41:42 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 17-Oct-2025 13:41:42 | 2025-10-17 17:41:42 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Oct-2025 13:41:42 | 2025-10-17 17:41:42 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Oct-2025 13:41:42 | 2025-10-17 17:41:42 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:42 | 2025-10-17 17:41:42 INFO calibrater::correct Beginning correct--------------------------- |
| 17-Oct-2025 13:41:42 | 2025-10-17 17:41:42 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:41:42 | 2025-10-17 17:41:42 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:45 | 2025-10-17 17:41:45 INFO calibrater::correct Finished correcting. |
| 17-Oct-2025 13:41:45 | 2025-10-17 17:41:45 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:41:45 | test_tool_calibrater.py::calibrater_test::test_selectVisObs |
| 17-Oct-2025 13:41:45 | PASSED |
| 17-Oct-2025 13:41:45 | |
| 17-Oct-2025 13:41:46 | 2025-10-17 17:41:46 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:41:46 | 2025-10-17 17:41:46 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:41:46 | 2025-10-17 17:41:46 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:41:46 | 2025-10-17 17:41:46 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:41:47 | 2025-10-17 17:41:48 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:41:47 | 2025-10-17 17:41:48 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:41:47 | 2025-10-17 17:41:48 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:41:47 | 2025-10-17 17:41:48 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 17-Oct-2025 13:41:47 | 2025-10-17 17:41:48 INFO calibrater::reset Reseting solve/apply state |
| 17-Oct-2025 13:41:47 | 2025-10-17 17:41:48 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 17-Oct-2025 13:41:47 | 2025-10-17 17:41:48 INFO Calibrater::selectvis+ Selecting on scan: '2' |
| 17-Oct-2025 13:41:47 | 2025-10-17 17:41:48 INFO Calibrater::selectvis By selection 328860 rows are reduced to 15660 |
| 17-Oct-2025 13:41:47 | 2025-10-17 17:41:48 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 17-Oct-2025 13:41:47 | 2025-10-17 17:41:48 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 17-Oct-2025 13:41:47 | 2025-10-17 17:41:48 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Oct-2025 13:41:47 | 2025-10-17 17:41:48 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Oct-2025 13:41:47 | 2025-10-17 17:41:48 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:47 | 2025-10-17 17:41:48 INFO calibrater::correct Beginning correct--------------------------- |
| 17-Oct-2025 13:41:47 | 2025-10-17 17:41:48 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:41:47 | 2025-10-17 17:41:48 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:48 | 2025-10-17 17:41:48 INFO calibrater::correct Finished correcting. |
| 17-Oct-2025 13:41:48 | 2025-10-17 17:41:49 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:41:48 | test_tool_calibrater.py::calibrater_test::test_selectVisScan |
| 17-Oct-2025 13:41:48 | Check tht the scan is properly selected by selectvis |
| 17-Oct-2025 13:41:48 | PASSED |
| 17-Oct-2025 13:41:48 | |
| 17-Oct-2025 13:41:49 | 2025-10-17 17:41:49 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:41:49 | 2025-10-17 17:41:49 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:41:49 | 2025-10-17 17:41:49 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:41:49 | 2025-10-17 17:41:49 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:41:50 | 2025-10-17 17:41:51 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:41:50 | 2025-10-17 17:41:51 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:41:50 | 2025-10-17 17:41:51 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:41:50 | 2025-10-17 17:41:51 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 17-Oct-2025 13:41:50 | 2025-10-17 17:41:51 INFO calibrater::reset Reseting solve/apply state |
| 17-Oct-2025 13:41:50 | 2025-10-17 17:41:51 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 17-Oct-2025 13:41:50 | 2025-10-17 17:41:51 INFO Calibrater::selectvis+ Selecting on spw: '0' |
| 17-Oct-2025 13:41:50 | 2025-10-17 17:41:51 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
| 17-Oct-2025 13:41:50 | 2025-10-17 17:41:51 INFO Calibrater::selectvis Frequency selection: |
| 17-Oct-2025 13:41:50 | 2025-10-17 17:41:51 INFO Calibrater::selectvis . Spw 0:0~7 (8 channels, step by 1) |
| 17-Oct-2025 13:41:50 | 2025-10-17 17:41:51 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 17-Oct-2025 13:41:50 | 2025-10-17 17:41:51 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Oct-2025 13:41:50 | 2025-10-17 17:41:51 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Oct-2025 13:41:51 | 2025-10-17 17:41:51 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:51 | 2025-10-17 17:41:51 INFO calibrater::correct Beginning correct--------------------------- |
| 17-Oct-2025 13:41:51 | 2025-10-17 17:41:51 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:41:51 | 2025-10-17 17:41:51 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:51 | 2025-10-17 17:41:52 INFO calibrater::correct Finished correcting. |
| 17-Oct-2025 13:41:52 | 2025-10-17 17:41:52 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:41:52 | test_tool_calibrater.py::calibrater_test::test_selectVisSpw |
| 17-Oct-2025 13:41:52 | Check that spw is properly selected by selectvis |
| 17-Oct-2025 13:41:52 | PASSED |
| 17-Oct-2025 13:41:52 | |
| 17-Oct-2025 13:41:53 | 2025-10-17 17:41:53 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:41:53 | 2025-10-17 17:41:53 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:41:53 | 2025-10-17 17:41:53 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:41:53 | 2025-10-17 17:41:53 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:41:54 | 2025-10-17 17:41:54 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:41:54 | 2025-10-17 17:41:55 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:41:54 | 2025-10-17 17:41:55 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:41:54 | 2025-10-17 17:41:55 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 17-Oct-2025 13:41:54 | 2025-10-17 17:41:55 INFO calibrater::reset Reseting solve/apply state |
| 17-Oct-2025 13:41:54 | 2025-10-17 17:41:55 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 17-Oct-2025 13:41:54 | 2025-10-17 17:41:55 INFO Calibrater::selectvis+ Selecting on time: '>04:38:23' |
| 17-Oct-2025 13:41:54 | 2025-10-17 17:41:55 INFO Calibrater::selectvis By selection 328860 rows are reduced to 313200 |
| 17-Oct-2025 13:41:54 | 2025-10-17 17:41:55 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 17-Oct-2025 13:41:54 | 2025-10-17 17:41:55 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 17-Oct-2025 13:41:54 | 2025-10-17 17:41:55 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Oct-2025 13:41:54 | 2025-10-17 17:41:55 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Oct-2025 13:41:54 | 2025-10-17 17:41:55 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:54 | 2025-10-17 17:41:55 INFO calibrater::correct Beginning correct--------------------------- |
| 17-Oct-2025 13:41:54 | 2025-10-17 17:41:55 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:41:54 | 2025-10-17 17:41:55 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:41:57 | 2025-10-17 17:41:58 INFO calibrater::correct Finished correcting. |
| 17-Oct-2025 13:41:58 | 2025-10-17 17:41:59 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:41:58 | test_tool_calibrater.py::calibrater_test::test_selectVisTime |
| 17-Oct-2025 13:41:58 | Check that time is properly selected by selectvis |
| 17-Oct-2025 13:41:58 | PASSED |
| 17-Oct-2025 13:41:58 | |
| 17-Oct-2025 13:41:58 | 2025-10-17 17:41:59 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:41:58 | 2025-10-17 17:41:59 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:41:58 | 2025-10-17 17:41:59 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:41:58 | 2025-10-17 17:41:59 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:42:00 | 2025-10-17 17:42:00 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:42:00 | 2025-10-17 17:42:00 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:42:00 | 2025-10-17 17:42:00 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:42:00 | 2025-10-17 17:42:00 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 17-Oct-2025 13:42:00 | 2025-10-17 17:42:00 INFO calibrater::reset Reseting solve/apply state |
| 17-Oct-2025 13:42:00 | 2025-10-17 17:42:00 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 17-Oct-2025 13:42:00 | 2025-10-17 17:42:00 INFO Calibrater::selectvis+ Selecting on uvrange: '> 500000lambda' |
| 17-Oct-2025 13:42:01 | 2025-10-17 17:42:01 INFO Calibrater::selectvis By selection 328860 rows are reduced to 103321 |
| 17-Oct-2025 13:42:01 | 2025-10-17 17:42:01 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 17-Oct-2025 13:42:01 | 2025-10-17 17:42:01 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 17-Oct-2025 13:42:01 | 2025-10-17 17:42:01 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Oct-2025 13:42:01 | 2025-10-17 17:42:01 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Oct-2025 13:42:01 | 2025-10-17 17:42:01 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:42:01 | 2025-10-17 17:42:01 INFO calibrater::correct Beginning correct--------------------------- |
| 17-Oct-2025 13:42:01 | 2025-10-17 17:42:01 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:42:01 | 2025-10-17 17:42:01 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:42:03 | 2025-10-17 17:42:03 INFO calibrater::correct Finished correcting. |
| 17-Oct-2025 13:42:03 | 2025-10-17 17:42:04 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:42:03 | test_tool_calibrater.py::calibrater_test::test_selectVisUVrange |
| 17-Oct-2025 13:42:03 | Check that selectvis properly selects for uvrange |
| 17-Oct-2025 13:42:03 | PASSED |
| 17-Oct-2025 13:42:03 | |
| 17-Oct-2025 13:42:04 | 2025-10-17 17:42:04 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:42:04 | 2025-10-17 17:42:04 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:42:04 | 2025-10-17 17:42:04 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:42:04 | 2025-10-17 17:42:04 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:42:05 | 2025-10-17 17:42:05 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:42:05 | 2025-10-17 17:42:06 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:42:05 | 2025-10-17 17:42:06 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:42:05 | 2025-10-17 17:42:06 INFO calibrater::parsecallibfile Beginning parsecallibfile-)------- |
| 17-Oct-2025 13:42:05 | 2025-10-17 17:42:06 INFO calibrater::setcallib Beginning setcallib--------- |
| 17-Oct-2025 13:42:05 | 2025-10-17 17:42:06 INFO Calibrater::setcallib2(callib) Arranging to APPLY: |
| 17-Oct-2025 13:42:05 | 2025-10-17 17:42:06 INFO . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 17-Oct-2025 13:42:05 | 2025-10-17 17:42:06 INFO . 0: |
| 17-Oct-2025 13:42:05 | 2025-10-17 17:42:06 INFO + MS: obs= scan= fld= intent= spw= |
| 17-Oct-2025 13:42:05 | 2025-10-17 17:42:06 INFO + CT: tinterp=linear finterp= |
| 17-Oct-2025 13:42:05 | 2025-10-17 17:42:06 INFO + obsmap=[] scanmap=[] fldmap=[] |
| 17-Oct-2025 13:42:05 | 2025-10-17 17:42:06 INFO + spwmap=[] antmap=[] |
| 17-Oct-2025 13:42:05 | 2025-10-17 17:42:06 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 17-Oct-2025 13:42:05 | 2025-10-17 17:42:06 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:42:05 | 2025-10-17 17:42:06 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 17-Oct-2025 13:42:08 | 2025-10-17 17:42:08 INFO calibrater::corrupt Finished corrupting. |
| 17-Oct-2025 13:42:08 | 2025-10-17 17:42:09 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:42:08 | test_tool_calibrater.py::calibrater_test::test_setCalLib |
| 17-Oct-2025 13:42:08 | Check that a provided cal table can be used to corrupt the MODEL_DATA |
| 17-Oct-2025 13:42:08 | PASSED |
| 17-Oct-2025 13:42:08 | |
| 17-Oct-2025 13:42:09 | 2025-10-17 17:42:09 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:42:09 | 2025-10-17 17:42:09 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:42:09 | 2025-10-17 17:42:09 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:42:09 | 2025-10-17 17:42:09 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:42:10 | 2025-10-17 17:42:11 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:42:10 | 2025-10-17 17:42:11 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:42:10 | 2025-10-17 17:42:11 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:42:10 | 2025-10-17 17:42:11 INFO Calibrater::setCorrDepFlags Setting correlation dependent flags = True |
| 17-Oct-2025 13:42:10 | 2025-10-17 17:42:11 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:42:10 | test_tool_calibrater.py::calibrater_test::test_setCorrDepFlags |
| 17-Oct-2025 13:42:10 | Check that corrdepflags will be checked |
| 17-Oct-2025 13:42:10 | PASSED |
| 17-Oct-2025 13:42:10 | |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:11 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:11 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:11 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:11 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:11 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:11 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:11 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:11 INFO calibrater::smooth Beginning smooth--(MSSelection version)------- |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:11 INFO Calibrater::smooth Beginning smoothing/interpolating method. |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:11 WARN Found pre-v4.1 caltable (/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ngc5921.gcal); attempting to update... |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:11 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:11 INFO Calibrater::smooth Storing result in testcalout.cal |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:11 INFO Writing solutions to table: testcalout.cal |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:11 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:42:11 | test_tool_calibrater.py::calibrater_test::test_smoothedCalTables |
| 17-Oct-2025 13:42:11 | Check that the smooth command creates a smoothed cal table |
| 17-Oct-2025 13:42:11 | PASSED |
| 17-Oct-2025 13:42:11 | |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:12 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:12 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:12 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:12 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:12 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:12 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:12 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:12 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:12 INFO calibrater::setsolvebandpoly Beginning setsolvebandpoly--(MSSelection version)------- |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:12 INFO Calibrater::setsolvebandpoly Arranging to SOLVE: |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:12 INFO Calibrater::setsolvebandpoly . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:12 INFO calibrater::solve Beginning solve----------------------------- |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:12 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:12 INFO Calibrater::solve . (None) |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:12 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:12 INFO Calibrater::solve . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 17-Oct-2025 13:42:11 | 2025-10-17 17:42:12 INFO Calibrater::solve Solving for BPOLY |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO For solint = inf, found 7 solution intervals. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.059507/0.0681762/0.0765806 |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.336529/0.750193/1.6779 |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0630839/0.0689061/0.0756384 |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.279482/0.74979/1.59355 |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0672607/0.089081/0.111106 |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:12 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.31075/3.32219/4.29305 |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0652822/0.0889198/0.116912 |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.44269/3.26616/4.3519 |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350681/0.587724/0.894558 |
| 17-Oct-2025 13:42:12 | 2025-10-17 17:42:13 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Oct-2025 13:42:14 | 2025-10-17 17:42:15 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.296/59.0077/111.454 |
| 17-Oct-2025 13:42:14 | 2025-10-17 17:42:15 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Oct-2025 13:42:14 | 2025-10-17 17:42:15 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.354236/0.581733/0.988903 |
| 17-Oct-2025 13:42:14 | 2025-10-17 17:42:15 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 17.2419/56.3249/117.264 |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0850169/0.113968/0.15276 |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.67561/5.33243/8.17296 |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0784236/0.114345/0.159908 |
| 17-Oct-2025 13:42:16 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.46392/5.27232/7.20673 |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0703936/0.102501/0.131676 |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.98728/4.47977/5.84264 |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0751114/0.102994/0.138529 |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:17 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:18 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.18629/4.47068/5.8941 |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:18 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:18 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:18 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:18 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:18 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:18 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:18 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:18 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:18 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:18 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:18 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:18 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350626/0.604424/0.974388 |
| 17-Oct-2025 13:42:17 | 2025-10-17 17:42:18 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Oct-2025 13:42:19 | 2025-10-17 17:42:19 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.2542/59.3511/120.719 |
| 17-Oct-2025 13:42:19 | 2025-10-17 17:42:19 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Oct-2025 13:42:19 | 2025-10-17 17:42:19 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.382806/0.598119/0.941571 |
| 17-Oct-2025 13:42:19 | 2025-10-17 17:42:19 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 20.0637/57.2112/118.101 |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0750931/0.0978998/0.125897 |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.72932/3.98787/5.33715 |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0658572/0.0972125/0.140794 |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:21 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:22 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.97943/3.97841/5.72903 |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:22 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:22 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:22 INFO Calibrater::solve Found good BPOLY solutions in 7 slots. |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:22 INFO calibrater::solve Finished solving. |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:22 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 17-Oct-2025 13:42:21 | test_tool_calibrater.py::calibrater_test::test_solveBandpass |
| 17-Oct-2025 13:42:21 | Check that solve band poly creates the output table |
| 17-Oct-2025 13:42:21 | PASSED |
| 17-Oct-2025 13:42:21 | |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:22 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:22 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 17-Oct-2025 13:42:21 | 2025-10-17 17:42:22 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO calibrater::setsolvegainspline Beginning setsolvegainspline--(MSSelection version)------- |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO Calibrater::setsolvegainspline Arranging to SOLVE: |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO Calibrater::setsolvegainspline . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO calibrater::solve Beginning solve----------------------------- |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO Calibrater::solve . (None) |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO Calibrater::solve . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO GJonesSpline::solve() Fitting time-dependent cubic splines. |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO GJonesSpline::solve() Solving for phase splines with splinetime= 10800 |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO GJonesSpline::solve() Solving for amplitude splines with splinetime= 10800 |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO GJonesSpline::solve() Accumulating data for: field= 1331+30500002_0, spw= 0, nchan= 63 |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63 |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63 |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO GJonesSpline::solve() Number of timestamps in data = 60 |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec. |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO GJonesSpline::solve() Number of cubic spline control points = 4 |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO GJonesSpline::solve() Number of cubic spline knots = 8 |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO GJonesSpline::solve() Number of cubic spline segments = 1 |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO GJonesSpline::solve() Fitting amplitude spline. |
| 17-Oct-2025 13:42:22 | test_tool_calibrater.py::calibrater_test::test_solveGainspline DPBTRF ;problem leading minor 23 |
| 17-Oct-2025 13:42:22 | DPBTRF ;problem leading minor 23 |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline. |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO GJonesSpline::solve() Fitting phase spline. |
| 17-Oct-2025 13:42:22 | DPBTRF ;problem leading minor 22 |
| 17-Oct-2025 13:42:22 | DPBTRF ;problem leading minor 22 |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:22 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:23 INFO calibrater::solve Finished solving. |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:23 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 17-Oct-2025 13:42:22 | |
| 17-Oct-2025 13:42:22 | Check that solve gain spline creates the output table |
| 17-Oct-2025 13:42:22 | PASSED |
| 17-Oct-2025 13:42:22 | |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:23 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:23 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:23 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:42:22 | 2025-10-17 17:42:23 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:42:24 | 2025-10-17 17:42:24 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:42:24 | 2025-10-17 17:42:24 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:42:24 | 2025-10-17 17:42:24 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:42:24 | 2025-10-17 17:42:24 INFO calibrater::specifycal Beginning specifycal----------------------- |
| 17-Oct-2025 13:42:24 | 2025-10-17 17:42:24 INFO Creating G Jones table from specified parameters. |
| 17-Oct-2025 13:42:24 | 2025-10-17 17:42:24 INFO Generating 'G' corrections. |
| 17-Oct-2025 13:42:24 | 2025-10-17 17:42:24 INFO Specified parameter(s) (per spw and pol) repeated on all antennas. |
| 17-Oct-2025 13:42:24 | 2025-10-17 17:42:24 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations. |
| 17-Oct-2025 13:42:24 | 2025-10-17 17:42:24 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9]) |
| 17-Oct-2025 13:42:24 | 2025-10-17 17:42:24 INFO Writing solutions to table: testcalout.cal |
| 17-Oct-2025 13:42:24 | 2025-10-17 17:42:25 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:42:24 | test_tool_calibrater.py::calibrater_test::test_specifyCal |
| 17-Oct-2025 13:42:24 | Check that specifycal can set values for specific spws and antennas |
| 17-Oct-2025 13:42:24 | PASSED |
| 17-Oct-2025 13:42:24 | |
| 17-Oct-2025 13:42:24 | 2025-10-17 17:42:25 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 17-Oct-2025 13:42:24 | 2025-10-17 17:42:25 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 17-Oct-2025 13:42:24 | 2025-10-17 17:42:25 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:42:24 | 2025-10-17 17:42:25 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:42:24 | 2025-10-17 17:42:25 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:26 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:26 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:26 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:26 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:26 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:27 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:27 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:27 INFO Calibrater::setsolve Arranging to SOLVE: |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:27 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:27 INFO Calibrater::state The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:27 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:27 INFO Calibrater::state The following calibration term is arranged for solve: |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:27 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:27 INFO calibrater::solve Beginning solve----------------------------- |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:27 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:27 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:27 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:27 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:27 INFO Solving for Mf Mueller |
| 17-Oct-2025 13:42:26 | 2025-10-17 17:42:27 INFO For solint = inf, found 84 solution intervals. |
| 17-Oct-2025 13:42:28 | 2025-10-17 17:42:28 INFO Found good Mf Mueller solutions in 84 intervals. |
| 17-Oct-2025 13:42:28 | 2025-10-17 17:42:28 INFO Writing solutions to table: output.ms |
| 17-Oct-2025 13:42:28 | 2025-10-17 17:42:29 INFO calibrater::solve Finished solving. |
| 17-Oct-2025 13:42:28 | 2025-10-17 17:42:29 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 17-Oct-2025 13:42:28 | test_tool_calibrater.py::calibrater_test::test_standardPath |
| 17-Oct-2025 13:42:28 | open setapply setsolve state solve close |
| 17-Oct-2025 13:42:28 | PASSED |
| 17-Oct-2025 13:42:28 | |
| 17-Oct-2025 13:42:28 | 2025-10-17 17:42:29 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:42:28 | 2025-10-17 17:42:29 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:42:28 | 2025-10-17 17:42:29 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:42:28 | 2025-10-17 17:42:29 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:30 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO name:: No table opened. |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: The Table Cache has the following 16 entries: |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO name:: No table opened. |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO showcache:: The Table Cache is empty. |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:42:30 | test_tool_calibrater.py::calibrater_test::test_takesMs |
| 17-Oct-2025 13:42:30 | Check that the calibrater tool can open and close an MS |
| 17-Oct-2025 13:42:30 | PASSED |
| 17-Oct-2025 13:42:30 | |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO Clearing all model records in MS header. |
| 17-Oct-2025 13:42:30 | 2025-10-17 17:42:31 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 17-Oct-2025 13:42:32 | 2025-10-17 17:42:32 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 17-Oct-2025 13:42:32 | 2025-10-17 17:42:32 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 17-Oct-2025 13:42:32 | 2025-10-17 17:42:32 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 17-Oct-2025 13:42:32 | 2025-10-17 17:42:32 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 17-Oct-2025 13:42:32 | 2025-10-17 17:42:32 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 17-Oct-2025 13:42:32 | 2025-10-17 17:42:33 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:42:32 | 2025-10-17 17:42:33 INFO calibrater::correct Beginning correct--------------------------- |
| 17-Oct-2025 13:42:32 | 2025-10-17 17:42:33 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 17-Oct-2025 13:42:32 | 2025-10-17 17:42:33 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 17-Oct-2025 13:42:35 | 2025-10-17 17:42:35 INFO calibrater::correct Finished correcting. |
| 17-Oct-2025 13:42:35 | 2025-10-17 17:42:35 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 17-Oct-2025 13:42:35 | test_tool_calibrater.py::calibrater_test::test_writeToCorrected |
| 17-Oct-2025 13:42:35 | Check that the tool writes to the CORRECTED_DATA column |
| 17-Oct-2025 13:42:35 | PASSED |
| 17-Oct-2025 13:42:35 | |
| 17-Oct-2025 13:42:35 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml - |
| 17-Oct-2025 13:42:35 | ================== 24 passed, 1 warning in 100.66s (0:01:40) =================== |
| 17-Oct-2025 13:42:36 | ============================= test session starts ============================== |
| 17-Oct-2025 13:42:36 | platform linux -- Python 3.12.9, pytest-8.4.2, pluggy-1.6.0 -- /home/casatest/venv/bin/python3.12 |
| 17-Oct-2025 13:42:36 | cachedir: .pytest_cache |
| 17-Oct-2025 13:42:36 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic |
| 17-Oct-2025 13:42:36 | configfile: pytest.ini |
| 17-Oct-2025 13:42:36 | collecting ... collected 5 items |
| 17-Oct-2025 13:42:36 | |
| 17-Oct-2025 13:42:36 | |
| 17-Oct-2025 13:42:37 | 2025-10-17 17:42:38 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 17-Oct-2025 13:42:39 | 2025-10-17 17:42:39 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 17-Oct-2025 13:42:40 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_noise |
| 17-Oct-2025 13:42:40 | test_flat_noise (flat noise type with flat noise input) |
| 17-Oct-2025 13:42:40 | PASSED |
| 17-Oct-2025 13:42:40 | |
| 17-Oct-2025 13:42:40 | 2025-10-17 17:42:41 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 17-Oct-2025 13:42:40 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_noise_existing_image |
| 17-Oct-2025 13:42:40 | test_flat_noise_existing image (flat noise type onto an existing image) |
| 17-Oct-2025 13:42:40 | PASSED |
| 17-Oct-2025 13:42:40 | |
| 17-Oct-2025 13:42:44 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_noise_flat_sky_input |
| 17-Oct-2025 13:42:44 | test_flat_noise_flat_sky_input (flat noise type with flat sky input) |
| 17-Oct-2025 13:42:44 | PASSED |
| 17-Oct-2025 13:42:44 | |
| 17-Oct-2025 13:42:48 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_sky |
| 17-Oct-2025 13:42:48 | test_flat_sky (flat sky type with flat noise input |
| 17-Oct-2025 13:42:48 | PASSED |
| 17-Oct-2025 13:42:48 | |
| 17-Oct-2025 13:42:51 | test_tool_linearmosaic.py::test_tool_linearmosaic::test_flat_sky_flat_sky_input |
| 17-Oct-2025 13:42:51 | test_flat_sky_flat_sky_input (flat sky type with flat sky inputs) |
| 17-Oct-2025 13:42:51 | PASSED |
| 17-Oct-2025 13:42:51 | |
| 17-Oct-2025 13:42:51 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_linearmosaic/nose.xml - |
| 17-Oct-2025 13:42:51 | ======================== 5 passed, 1 warning in 15.67s ========================= |
| 17-Oct-2025 13:42:52 | ============================= test session starts ============================== |
| 17-Oct-2025 13:42:52 | platform linux -- Python 3.12.9, pytest-8.4.2, pluggy-1.6.0 -- /home/casatest/venv/bin/python3.12 |
| 17-Oct-2025 13:42:52 | cachedir: .pytest_cache |
| 17-Oct-2025 13:42:52 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner |
| 17-Oct-2025 13:42:52 | configfile: pytest.ini |
| 17-Oct-2025 13:42:52 | collecting ... collected 1 item |
| 17-Oct-2025 13:42:52 | |
| 17-Oct-2025 13:42:52 | |
| 17-Oct-2025 13:42:53 | 2025-10-17 17:42:53 SEVERE MeasTable::dUTC(Double) (file /source/casa6/casatools/casacore/measures/Measures/MeasTable.cc, line 4290) Leap second table TAI_UTC seems out-of-date. |
| 17-Oct-2025 13:42:53 | 2025-10-17 17:42:53 SEVERE MeasTable::dUTC(Double) (file /source/casa6/casatools/casacore/measures/Measures/MeasTable.cc, line 4290)+ Until the table is updated (see the CASA documentation or your system admin), |
| 17-Oct-2025 13:42:53 | 2025-10-17 17:42:53 SEVERE MeasTable::dUTC(Double) (file /source/casa6/casatools/casacore/measures/Measures/MeasTable.cc, line 4290)+ times and coordinates derived from UTC could be wrong by 1s or more. |
| 17-Oct-2025 13:42:54 | test_tool_msuvbinner.py::msuvbinnerTest::test_fill_1ms |
| 17-Oct-2025 13:42:54 | test uvgridding 1 ms onto an output grid |
| 17-Oct-2025 13:42:54 | PASSED |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msuvbinner/nose.xml - |
| 17-Oct-2025 13:42:54 | ========================= 1 passed, 1 warning in 2.66s ========================= |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_simulator/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/ |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_deviation/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msmetadata/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_regrid/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta/ |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_quanta/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta/ |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_rebin/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_statwt/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms/ |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_sdm_toms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms/ |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils/ |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_synthesisutils/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils/ |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_transpose/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_subimage/ |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_subimage |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_subimage/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_subimage/ |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_agentflagger/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_componentlist/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_vpmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_linearmosaic/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
| 17-Oct-2025 13:42:54 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner |
| 17-Oct-2025 13:42:54 | |
| 17-Oct-2025 13:42:54 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msuvbinner/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
| 17-Oct-2025 13:42:55 | total 77344 |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci 15001 135351 Oct 17 17:27 casatestutils-6.7.3.1a14040.dev1+dirty-py3-none-any.whl |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci 15001 78889808 Oct 17 17:27 casatools-6.7.3.1a14040.dev1+dirty-cp312-cp312-manylinux_2_28_x86_64.whl |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 4340 Oct 17 17:42 test_tool_agentflagger.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 1006 Oct 17 17:42 test_tool_calanalysis.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 2658 Oct 17 17:42 test_tool_calibrater.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 687 Oct 17 17:42 test_tool_componentlist.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 7467 Oct 17 17:42 test_tool_coordsys.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 12935 Oct 17 17:42 test_tool_image.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 2220 Oct 17 17:42 test_tool_image_collapse.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 1048 Oct 17 17:42 test_tool_image_deviation.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 2575 Oct 17 17:42 test_tool_image_fitprofile.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 1178 Oct 17 17:42 test_tool_image_pbcor.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 883 Oct 17 17:42 test_tool_image_pv.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 1006 Oct 17 17:42 test_tool_image_rebin.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 1336 Oct 17 17:42 test_tool_image_regrid.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 1533 Oct 17 17:42 test_tool_image_statistics.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 765 Oct 17 17:42 test_tool_image_subimage.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 890 Oct 17 17:42 test_tool_image_transpose.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 1966 Oct 17 17:42 test_tool_imagepol.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 839 Oct 17 17:42 test_tool_linearmosaic.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 668 Oct 17 17:42 test_tool_logsink.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 549 Oct 17 17:42 test_tool_measures.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 5224 Oct 17 17:42 test_tool_ms.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 367 Oct 17 17:42 test_tool_ms_createmultims.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 2095 Oct 17 17:42 test_tool_ms_statwt.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 8633 Oct 17 17:42 test_tool_msmetadata.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 359 Oct 17 17:42 test_tool_msuvbinner.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 1171 Oct 17 17:42 test_tool_quanta.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 3977 Oct 17 17:42 test_tool_regionmanager.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 2072 Oct 17 17:42 test_tool_sdm.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 2097 Oct 17 17:42 test_tool_sdm_toms.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 670 Oct 17 17:42 test_tool_simulator.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 1717 Oct 17 17:42 test_tool_synthesisutils.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 1462 Oct 17 17:42 test_tool_table.xml |
| 17-Oct-2025 13:42:55 | -rw-r--r-- 1 casaci root 1717 Oct 17 17:42 test_tool_vpmanager.xml |
| 17-Oct-2025 13:42:55 | Finished task 'Test wheel' with result: Success |
| 17-Oct-2025 13:42:55 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
| 17-Oct-2025 13:42:55 | Parsing test results under /export/home/cbt-el7-1/bamboo-home/xml-data/build-dir/CASASPECS-CI176-TTOML228... |
| 17-Oct-2025 13:42:56 | Finished task 'Parse tests' with result: Success |
| 17-Oct-2025 13:42:56 | Starting task 'Cleanup' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
| 17-Oct-2025 13:42:56 | Beginning to execute external process for build 'CASASPECS - CI Build - CAS-14040 - Test Tools Many Linux 2.28 #3 (CASASPECS-CI176-TTOML228-3)' ... running command line: /export/home/cbt-el7-1/bamboo-home/temp/CASASPECS-CI176-TTOML228-3-ScriptBuildTask-11913618153716127918.sh ... in: /export/home/cbt-el7-1/bamboo-home/xml-data/build-dir/CASASPECS-CI176-TTOML228 |
| 17-Oct-2025 13:42:56 | Starting cleanup |
| 17-Oct-2025 13:43:07 | wheel-container-test |
| 17-Oct-2025 13:43:09 | wheel-container-test |
| 17-Oct-2025 13:43:09 | Cleanup complete |
| 17-Oct-2025 13:43:09 | Finished task 'Cleanup' with result: Success |
| 17-Oct-2025 13:43:09 | Running post build plugin 'Docker Container Cleanup' |
| 17-Oct-2025 13:43:09 | Beginning to execute external process for build 'CASASPECS - CI Build - CAS-14040 - Test Tools Many Linux 2.28 #3 (CASASPECS-CI176-TTOML228-3)' ... running command line: /usr/bin/docker rm -f wheel-container-test ... in: /export/home/cbt-el7-1/bamboo-home/xml-data/build-dir/CASASPECS-CI176-TTOML228 |
| 17-Oct-2025 13:43:09 | Error response from daemon: No such container: wheel-container-test |
| 17-Oct-2025 13:43:09 | Running post build plugin 'NCover Results Collector' |
| 17-Oct-2025 13:43:09 | Running post build plugin 'Build Results Label Collector' |
| 17-Oct-2025 13:43:09 | Running post build plugin 'Clover Results Collector' |
| 17-Oct-2025 13:43:09 | Running post build plugin 'npm Cache Cleanup' |
| 17-Oct-2025 13:43:09 | Running post build plugin 'Artifact Copier' |
| 17-Oct-2025 13:43:09 | Publishing an artifact: Tests |
| 17-Oct-2025 13:43:10 | Finished publishing of artifact Non required job artifact Http Compression On : [Tests], patterns: [*.xml] anchored at: [wheeldirectory/] in 576.7 ms |
| 17-Oct-2025 13:43:10 | Publishing an artifact: xml Directories |
| 17-Oct-2025 13:43:10 | Finished publishing of artifact Non required job artifact Http Compression On : [xml Directories], patterns: [**/*.xml] anchored at: [wheeldirectory/] in 207.2 ms |
| 17-Oct-2025 13:43:10 | Finalising the build... |
| 17-Oct-2025 13:43:10 | Stopping timer. |
| 17-Oct-2025 13:43:10 | Build CASASPECS-CI176-TTOML228-3 completed. |
| 17-Oct-2025 13:43:10 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
| 17-Oct-2025 13:43:10 | Running on server: post build plugin 'NCover Results Collector' |
| 17-Oct-2025 13:43:10 | Running on server: post build plugin 'Build Labeller' |
| 17-Oct-2025 13:43:10 | Running on server: post build plugin 'Clover Delta Calculator' |
| 17-Oct-2025 13:43:10 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
| 17-Oct-2025 13:43:10 | All post build plugins have finished |
| 17-Oct-2025 13:43:10 | Generating build results summary... |
| 17-Oct-2025 13:43:10 | Saving build results to disk... |
| 17-Oct-2025 13:43:10 | Store variable context... |
| 17-Oct-2025 13:43:10 | Finished building CASASPECS-CI176-TTOML228-3. |