fatal: could not read Username for 'https://open-bitbucket.nrao.edu': No such device or address
Error response from daemon: No such container: wheel-container-test
Error response from daemon: No such container: wheel-container-test
2025-07-16 22:41:34        INFO        ImageMaskAttacher::makeMask        Created and initialized mask `mask0'
2025-07-16 22:41:34        INFO        ImageMaskAttacher::makeMask        Created mask `mask0'
2025-07-16 22:41:34        INFO        ImageFactory::createImage        Created Temp image  of shape [100, 100, 20] with float valued pixels.
2025-07-16 22:41:34        INFO        image::_casaQuantityFromVar         Will use values specified in major, minor, pa to set beam
2025-07-16 22:41:34        INFO        BeamManipulator::set        This image currently has no beams of any kind. Since channel and/or polarization were specified, a set of per plane beams, each equal to the specified beam, will be created.
2025-07-16 22:41:34        INFO        BeamManipulator::set        Beam parameters:  Major          : 20 arcsec
2025-07-16 22:41:34        INFO        BeamManipulator::set+          Minor          : 20 arcsec
2025-07-16 22:41:34        INFO        BeamManipulator::set+          Position Angle : 0 deg
2025-07-16 22:41:34        INFO        image::_casaQuantityFromVar         Will use values specified in major, minor, pa to set beam
2025-07-16 22:41:34        INFO        BeamManipulator::set        Beam parameters:  Major          : 30 arcsec
2025-07-16 22:41:34        INFO        BeamManipulator::set+          Minor          : 30 arcsec
2025-07-16 22:41:34        INFO        BeamManipulator::set+          Position Angle : 0 deg
2025-07-16 22:41:34        SEVERE        image::regrid        Exception Reported: Exception: An image with multiple beams cannot be regridded along the spectral axis. You may wish to convolve all channels to a common resolution and retry.
2025-07-16 22:41:34        SEVERE        image::regrid+        ... thrown by std::shared_ptr<casacore::ImageInterface<T> > casa::ImageRegridder<T>::regrid() const [with T = float] at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRegridder.tcc, line: 83
2025-07-16 22:41:35        SEVERE        image::regrid        Exception Reported: Exception: An image with multiple beams cannot be regridded along the spectral axis. You may wish to convolve all channels to a common resolution and retry.
2025-07-16 22:41:35        SEVERE        image::regrid+        ... thrown by std::shared_ptr<casacore::ImageInterface<T> > casa::ImageRegridder<T>::regrid() const [with T = float] at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRegridder.tcc, line: 97
2025-07-16 22:41:35        INFO        ImageMaskAttacher::makeMask        Created and initialized mask `mask0'
2025-07-16 22:41:35        WARN        ImageRegridder::_doImagesOverlap        At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
2025-07-16 22:41:35        WARN        ImageRegrid::regrid        You are regridding an image whose beam is not well sampled by the pixel size.  Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
2025-07-16 22:41:35        INFO        ImageFactory::createImage        Created Temp image  of shape [20, 20, 20, 4] with float valued pixels.
2025-07-16 22:41:35        INFO        ImageMaskAttacher::makeMask        Created and initialized mask `mask0'
2025-07-16 22:41:35        INFO        ImageRegrid::_checkAxes         The Stokes axis cannot be regridded - removing from list
2025-07-16 22:41:35        INFO        SubImageFactory::createImage        Creating image 'first' of shape [20, 20, 20, 4]
2025-07-16 22:41:35        INFO        ImageMaskAttacher::makeMask        Created and initialized mask `mask0'
2025-07-16 22:41:35        SEVERE        image::regrid        Exception Reported: Exception: There is no overlap between the (region chosen in) the input image and the output image with respect to the axes being regridded..
2025-07-16 22:41:35        SEVERE        image::regrid+        ... thrown by std::shared_ptr<casacore::ImageInterface<T> > casa::ImageRegridder<T>::_regrid() const [with T = float] at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRegridder.tcc, line: 151
2025-07-16 22:41:35        INFO        ImageMaskAttacher::makeMask        Created and initialized mask `mask0'
2025-07-16 22:41:35        INFO        SubImageFactory::createImage        Creating image 'fourth' of shape [20, 20, 20, 4]
2025-07-16 22:41:36        INFO        ImageFactory::createImage        Created Temp image  of shape [200, 200, 20, 4] with float valued pixels.
2025-07-16 22:41:36        INFO        ImageMaskAttacher::makeMask        Created and initialized mask `mask0'
2025-07-16 22:41:36        WARN        ImageRegridder::_doImagesOverlap        At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
2025-07-16 22:41:36        INFO        ImageRegrid::_checkAxes         The Stokes axis cannot be regridded - removing from list
2025-07-16 22:41:37        INFO        SubImageFactory::createImage        Creating image 'third' of shape [200, 200, 20, 4]
2025-07-16 22:41:37        INFO        ImageMaskAttacher::makeMask        Created mask `mask0'
2025-07-16 22:41:38        INFO        ImageMaskAttacher::makeMask        Created and initialized mask `mask0'
2025-07-16 22:41:38        WARN        ImageRegridder::_doImagesOverlap        At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
2025-07-16 22:41:38        SEVERE        image::regrid        Exception Reported: Exception: There is no overlap between the (region chosen in) the input image and the output image with respect to the axes being regridded..
2025-07-16 22:41:38        SEVERE        image::regrid+        ... thrown by std::shared_ptr<casacore::ImageInterface<T> > casa::ImageRegridder<T>::_regrid() const [with T = float] at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRegridder.tcc, line: 151
2025-07-16 22:41:38        INFO        ImageFactory::createImage        Created Temp image  of shape [20, 20, 1001, 4] with float valued pixels.
2025-07-16 22:41:38        INFO        ImageMaskAttacher::makeMask        Created and initialized mask `mask0'
2025-07-16 22:41:38        INFO        SubImageFactory::createImage        Creating image 'sixth' of shape [20, 20, 1001, 4]
2025-07-16 22:41:38        INFO        ImageMaskAttacher::makeMask        Created mask `mask0'
2025-07-16 22:41:39        INFO        ImageMaskAttacher::makeMask        Created and initialized mask `mask0'
2025-07-16 22:41:39        SEVERE        image::regrid        Exception Reported: Exception: There is no overlap between the (region chosen in) the input image and the output image with respect to the axes being regridded..
2025-07-16 22:41:39        SEVERE        image::regrid+        ... thrown by std::shared_ptr<casacore::ImageInterface<T> > casa::ImageRegridder<T>::_regrid() const [with T = float] at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRegridder.tcc, line: 151
2025-07-16 22:41:39        INFO        ImageMaskAttacher::makeMask        Created and initialized mask `mask0'
2025-07-16 22:41:39        WARN        ImageRegridder::_doImagesOverlap        At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
2025-07-16 22:41:39        INFO        ImageRegrid::_checkAxes         The Stokes axis cannot be regridded - removing from list
2025-07-16 22:41:39        WARN        ImageRegrid::regrid        You are regridding an image whose beam is not well sampled by the pixel size.  Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
2025-07-16 22:41:39        INFO        SubImageFactory::createImage        Creating image 'gal_regrid_out.image' of shape [300, 300, 1, 46]
2025-07-16 22:41:40        INFO        ImageMaskAttacher::makeMask        Created mask `mask0'
2025-07-16 22:41:40        WARN        image::open (file src/tools/image/image_cmpt.cc, line 4208)        Another image is already open, closing first
2025-07-16 22:41:41        INFO        ImageFactory::createImage        Created Paged image 'maskim' of shape [200, 200, 1, 1] with float valued pixels.
2025-07-16 22:41:41        INFO        ImageFactory::createImage        Created Temp image  of shape [200, 200, 1, 20] with float valued pixels.
2025-07-16 22:41:41        SEVERE        image::regrid        Exception Reported: The input image shape ([200, 200, 1, 20]) and mask shape ([200, 200, 1, 1]) are different, and it was specified that the mask should not be extended, so the mask cannot be applied to the (sub)image. Specifying that the mask should be extended may resolve the issue at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 306
2025-07-16 22:41:41        INFO        CasacRegionManager::fromBCS        No directional region specified. Using full positional plane.
2025-07-16 22:41:41        INFO        CasacRegionManager::fromBCS        Using polarizations ALL
2025-07-16 22:41:41        INFO        ImageMaskAttacher::makeMask        Created and initialized mask `mask0'
2025-07-16 22:41:41        WARN        ImageRegridder::_doImagesOverlap        At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
2025-07-16 22:41:41        INFO        ImageRegrid::_checkAxes         The Stokes axis cannot be regridded - removing from list
2025-07-16 22:41:42        INFO        ImageMaskAttacher::makeMask        Created mask `mask0'
2025-07-16 22:41:42        SEVERE        image::regrid        Exception Reported: The input image shape ([200, 200, 1, 20]) and mask shape ([200, 200, 1, 1]) are different, and it was specified that the mask should not be extended, so the mask cannot be applied to the (sub)image. Specifying that the mask should be extended may resolve the issue at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 306
2025-07-16 22:41:42        INFO        ImageMaskAttacher::makeMask        Created and initialized mask `mask0'
2025-07-16 22:41:42        WARN        ImageRegridder::_doImagesOverlap        At least one of the images exceeds one degree on at one side, not checking for direction plane overlap.
2025-07-16 22:41:42        INFO        ImageRegrid::_checkAxes         The Stokes axis cannot be regridded - removing from list
2025-07-16 22:41:42        INFO        ImageMaskAttacher::makeMask        Created mask `mask0'
2025-07-16 22:41:42        INFO        name::        No table opened.
2025-07-16 22:41:42        INFO        showcache::        The Table Cache is empty.
2025-07-16 22:41:42        INFO        name::        No table opened.
2025-07-16 22:41:42        INFO        showcache::        The Table Cache is empty.
2025-07-16 22:41:45        INFO        NewMSSimulator::initAnt()         Using global coordinates for the antennas
2025-07-16 22:41:45        INFO        NewMSSimulator::initAnt()         Added rows to ANTENNA table
2025-07-16 22:41:45        INFO        MSsimulator::initFeeds()         Added rows to FEED table
2025-07-16 22:41:45        INFO        MSsimulator::initSpWindows()         Creating new spectral window LBand, ID 1
2025-07-16 22:41:45        INFO        simulator::settimes()        Times
2025-07-16 22:41:45        INFO        simulator::settimes()+             Integration time 2000s
2025-07-16 22:41:45        INFO        simulator::settimes()             Times will be interpreted as hour angles for first source
2025-07-16 22:41:45        INFO        NewMSSimulator::observe()        First source: fake @ 19:53:50.00   +40.06.00.00       J2000
2025-07-16 22:41:45        INFO        NewMSSimulator::observe()+        Full time range: 03-Oct-2019/21:16:01.8 -- 04-Oct-2019/07:16:01.8 TAI with int = 2000
2025-07-16 22:41:45        INFO        NewMSSimulator::observe()        Calculating a total of 18 integrations
2025-07-16 22:41:47        INFO        Simulator::reset()         Resetting all visibility corruption components
2025-07-16 22:41:47        INFO        Simulator::reset()         Reset all image-plane corruption components
2025-07-16 22:41:48        INFO        AgentFlagger::open        Table type is Measurement Set
2025-07-16 22:41:48        INFO        AgentFlagger::initAgents        There are initially 1 agents in the list. Agents: unflag
2025-07-16 22:41:48        INFO        AgentFlagger::initAgents        There are 1 valid agents in the list. Agents: unflag
2025-07-16 22:41:48        INFO        FlagMSHandler::        Chunk = 1 [progress: 100%], Observation = 0, Array = 0, Scan = 1, Field = 0 (fake), Spw = 0, Channels = 5, Corrs = [ RR LL ], Total Rows = 6318
2025-07-16 22:41:48        INFO        Unflag::chunkSummary        => Data unflagged so far 100% (63180/63180)
2025-07-16 22:41:48        INFO        FlagMSHandler::nextChunk         ====================================================================================
2025-07-16 22:41:48        INFO        Unflag::tableSummary        => Percentage of data un-flagged in table selection: 100%
2025-07-16 22:41:48        INFO        AgentFlagger::run        => Writing flags to the MS
2025-07-16 22:41:49        INFO        NewMSSimulator::NewMSSimulator(MeasurementSet& theMS)         Opening MeasurementSet /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/myms.ms with 6318 rows
2025-07-16 22:41:49        INFO        NewMSSimulator::NewMSSimulator(MeasurementSet& theMS)            last spectral window ID = 1
2025-07-16 22:41:49        INFO        Simulator::predict()         Predicting visibilities using model: [] and componentList: mycomplist.cl
2025-07-16 22:41:49        INFO        Simulator::predict()         The data column will be replaced
2025-07-16 22:41:49        INFO        Simulator::getVPRecord         Using default Voltage Patterns from the VPManager
2025-07-16 22:41:49        INFO        Simulator::getVPRecord         Temporary alert : The state of the vpmanager tool has been modified by loading these primary beam models. If any of your scripts rely on the vpmanager state being preserved throughout your CASA session, please use vp.saveastable() and vp.loadfromtable() as needed.
2025-07-16 22:41:49        INFO        Simulator::createSkyEquation()         Synthesis gridding
2025-07-16 22:41:49        INFO        Simulator::createSkyEquation()         Fourier transforms will use image centers as tangent points
2025-07-16 22:41:49        INFO        Simulator::reset()         Resetting all visibility corruption components
2025-07-16 22:41:49        INFO        Simulator::reset()         Reset all image-plane corruption components