Build: #2 was successful
Job: Test Tools Many Linux 2.28 was successful
Build log
The build generated 53,024 lines of output. The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
| 09-May-2025 20:25:22 | Check that the MS is corrupted using the cal table |
| 09-May-2025 20:25:22 | PASSED |
| 09-May-2025 20:25:22 | |
| 09-May-2025 20:25:22 | 2025-05-10 00:25:23 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:25:22 | 2025-05-10 00:25:23 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:25:22 | 2025-05-10 00:25:23 INFO Clearing all model records in MS header. |
| 09-May-2025 20:25:22 | 2025-05-10 00:25:23 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:25:24 | 2025-05-10 00:25:24 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:25:24 | 2025-05-10 00:25:25 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:25:24 | 2025-05-10 00:25:25 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:25:26 | 2025-05-10 00:25:27 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:25:26 | test_tool_calibrater.py::calibrater_test::test_createEmpty |
| 09-May-2025 20:25:26 | Check that an empty cal table can be created |
| 09-May-2025 20:25:26 | PASSED |
| 09-May-2025 20:25:26 | |
| 09-May-2025 20:25:26 | 2025-05-10 00:25:27 INFO name:: No table opened. |
| 09-May-2025 20:25:26 | 2025-05-10 00:25:27 INFO showcache:: The Table Cache is empty. |
| 09-May-2025 20:25:26 | 2025-05-10 00:25:27 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:25:26 | 2025-05-10 00:25:27 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:25:26 | 2025-05-10 00:25:27 INFO Clearing all model records in MS header. |
| 09-May-2025 20:25:27 | 2025-05-10 00:25:27 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:25:28 | 2025-05-10 00:25:29 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO name:: No table opened. |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO showcache:: The Table Cache has the following 16 entries: |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:29 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:25:29 | test_tool_calibrater.py::calibrater_test::test_done |
| 09-May-2025 20:25:29 | Check that done closes the active calibrator tool |
| 09-May-2025 20:25:29 | PASSED |
| 09-May-2025 20:25:29 | |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:30 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:30 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:30 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:30 INFO Clearing all model records in MS header. |
| 09-May-2025 20:25:29 | 2025-05-10 00:25:30 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:25:31 | 2025-05-10 00:25:31 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:25:31 | 2025-05-10 00:25:32 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:25:31 | 2025-05-10 00:25:32 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:25:31 | 2025-05-10 00:25:32 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 09-May-2025 20:25:31 | 2025-05-10 00:25:32 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 09-May-2025 20:25:32 | 2025-05-10 00:25:32 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:25:32 | 2025-05-10 00:25:32 INFO calibrater::correct Beginning correct--------------------------- |
| 09-May-2025 20:25:32 | 2025-05-10 00:25:32 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 09-May-2025 20:25:32 | 2025-05-10 00:25:32 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:25:34 | 2025-05-10 00:25:34 INFO calibrater::correct Finished correcting. |
| 09-May-2025 20:25:35 | 2025-05-10 00:25:35 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 09-May-2025 20:25:35 | 2025-05-10 00:25:35 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:25:35 | 2025-05-10 00:25:35 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:25:35 | 2025-05-10 00:25:36 INFO calibrater::initcalset Beginning initcalset------------------------ |
| 09-May-2025 20:25:35 | 2025-05-10 00:25:36 INFO VisSet::VisSet Initializing MODEL_DATA (to unity) and CORRECTED_DATA (to DATA) |
| 09-May-2025 20:25:36 | 2025-05-10 00:25:36 INFO VisSet::VisSet Initialized 328860 rows. |
| 09-May-2025 20:25:37 | 2025-05-10 00:25:38 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 09-May-2025 20:25:38 | test_tool_calibrater.py::calibrater_test::test_reinitModel |
| 09-May-2025 20:25:38 | Check that initcalset will reset the CORRECTED_DATA to unity |
| 09-May-2025 20:25:38 | PASSED |
| 09-May-2025 20:25:38 | |
| 09-May-2025 20:25:38 | 2025-05-10 00:25:38 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:25:38 | 2025-05-10 00:25:38 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:25:38 | 2025-05-10 00:25:38 INFO Clearing all model records in MS header. |
| 09-May-2025 20:25:38 | 2025-05-10 00:25:39 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:25:39 | 2025-05-10 00:25:40 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:40 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:40 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:40 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:40 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:40 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:40 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:40 INFO Calibrater::setsolve Arranging to SOLVE: |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:40 INFO Calibrater::setsolve . Mf Mueller: table=gaincaltest2.ms.G0 append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:40 INFO calibrater::reset Reseting solve/apply state |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:40 INFO calibrater::solve Beginning solve----------------------------- |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:40 SEVERE Calibrater::solve Caught exception: Please run setsolve before attempting to solve. |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:40 INFO Calibrater::solve Reseting entire solve/apply state. |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:40 SEVERE Exception Reported: Error in Calibrater::solve. |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:40 INFO calibrater::correct Beginning correct--------------------------- |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:40 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:40 INFO Calibrater::correct2 (VI2/VB2) . (None) |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:41 SEVERE Calibrater::correct2 (VI2/VB2) Caught exception: Nothing to Apply |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:41 INFO Calibrater::correct2 (VI2/VB2) Resetting all calibration application settings. |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:41 SEVERE Exception Reported: Error in Calibrater::correct. |
| 09-May-2025 20:25:40 | 2025-05-10 00:25:41 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:25:40 | test_tool_calibrater.py::calibrater_test::test_resetSolveApply |
| 09-May-2025 20:25:40 | Check that the reset function can clear set apply and solves |
| 09-May-2025 20:25:40 | PASSED |
| 09-May-2025 20:25:40 | |
| 09-May-2025 20:25:41 | 2025-05-10 00:25:41 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:25:41 | 2025-05-10 00:25:41 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:25:41 | 2025-05-10 00:25:41 INFO Clearing all model records in MS header. |
| 09-May-2025 20:25:41 | 2025-05-10 00:25:41 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:25:42 | 2025-05-10 00:25:43 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:25:42 | 2025-05-10 00:25:43 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:25:42 | 2025-05-10 00:25:43 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:25:43 | 2025-05-10 00:25:44 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 09-May-2025 20:25:43 | 2025-05-10 00:25:44 INFO calibrater::reset Reseting solve/apply state |
| 09-May-2025 20:25:43 | 2025-05-10 00:25:44 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 09-May-2025 20:25:43 | 2025-05-10 00:25:44 INFO Calibrater::selectvis+ Selecting on spw: '1' |
| 09-May-2025 20:25:44 | 2025-05-10 00:25:44 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
| 09-May-2025 20:25:44 | 2025-05-10 00:25:44 INFO Calibrater::selectvis Frequency selection: |
| 09-May-2025 20:25:44 | 2025-05-10 00:25:44 INFO Calibrater::selectvis . Spw 1:0~7 (8 channels, step by 1) |
| 09-May-2025 20:25:44 | 2025-05-10 00:25:44 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 09-May-2025 20:25:44 | 2025-05-10 00:25:44 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:25:44 | test_tool_calibrater.py::calibrater_test::test_returnDict |
| 09-May-2025 20:25:44 | Check that the returndict function gives a dictonary with the expected keys |
| 09-May-2025 20:25:44 | PASSED |
| 09-May-2025 20:25:44 | |
| 09-May-2025 20:25:45 | 2025-05-10 00:25:46 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:25:45 | 2025-05-10 00:25:46 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:25:45 | 2025-05-10 00:25:46 INFO Clearing all model records in MS header. |
| 09-May-2025 20:25:45 | 2025-05-10 00:25:46 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:25:47 | 2025-05-10 00:25:47 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:25:47 | 2025-05-10 00:25:47 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:25:47 | 2025-05-10 00:25:47 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:25:47 | 2025-05-10 00:25:47 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 09-May-2025 20:25:47 | 2025-05-10 00:25:47 INFO calibrater::reset Reseting solve/apply state |
| 09-May-2025 20:25:47 | 2025-05-10 00:25:47 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 09-May-2025 20:25:47 | 2025-05-10 00:25:47 INFO Calibrater::selectvis+ Selecting on antenna/baseline: '0' |
| 09-May-2025 20:25:47 | 2025-05-10 00:25:48 INFO Calibrater::selectvis By selection 328860 rows are reduced to 65772 |
| 09-May-2025 20:25:47 | 2025-05-10 00:25:48 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 09-May-2025 20:25:47 | 2025-05-10 00:25:48 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 09-May-2025 20:25:47 | 2025-05-10 00:25:48 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 09-May-2025 20:25:47 | 2025-05-10 00:25:48 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 09-May-2025 20:25:47 | 2025-05-10 00:25:48 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:25:47 | 2025-05-10 00:25:48 INFO calibrater::correct Beginning correct--------------------------- |
| 09-May-2025 20:25:47 | 2025-05-10 00:25:48 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 09-May-2025 20:25:47 | 2025-05-10 00:25:48 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:25:49 | 2025-05-10 00:25:49 INFO calibrater::correct Finished correcting. |
| 09-May-2025 20:25:50 | 2025-05-10 00:25:50 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:25:50 | test_tool_calibrater.py::calibrater_test::test_selectVisBaseline |
| 09-May-2025 20:25:50 | Check that selectvis properly selects baseline/antenna |
| 09-May-2025 20:25:50 | 65772 65772 |
| 09-May-2025 20:25:50 | 263088 263088 |
| 09-May-2025 20:25:50 | PASSED |
| 09-May-2025 20:25:50 | |
| 09-May-2025 20:25:51 | 2025-05-10 00:25:51 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:25:51 | 2025-05-10 00:25:51 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:25:51 | 2025-05-10 00:25:51 INFO Clearing all model records in MS header. |
| 09-May-2025 20:25:51 | 2025-05-10 00:25:51 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:25:52 | 2025-05-10 00:25:53 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:25:53 | 2025-05-10 00:25:53 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:25:53 | 2025-05-10 00:25:53 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:25:53 | 2025-05-10 00:25:53 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 09-May-2025 20:25:53 | 2025-05-10 00:25:53 INFO calibrater::reset Reseting solve/apply state |
| 09-May-2025 20:25:53 | 2025-05-10 00:25:53 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 09-May-2025 20:25:53 | 2025-05-10 00:25:53 INFO Calibrater::selectvis+ Selecting on field: '0' |
| 09-May-2025 20:25:53 | 2025-05-10 00:25:53 INFO Calibrater::selectvis By selection 328860 rows are reduced to 172260 |
| 09-May-2025 20:25:53 | 2025-05-10 00:25:53 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 09-May-2025 20:25:53 | 2025-05-10 00:25:53 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 09-May-2025 20:25:53 | 2025-05-10 00:25:53 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 09-May-2025 20:25:53 | 2025-05-10 00:25:53 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 09-May-2025 20:25:53 | 2025-05-10 00:25:53 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:25:53 | 2025-05-10 00:25:53 INFO calibrater::correct Beginning correct--------------------------- |
| 09-May-2025 20:25:53 | 2025-05-10 00:25:53 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 09-May-2025 20:25:53 | 2025-05-10 00:25:53 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:25:54 | 2025-05-10 00:25:55 INFO calibrater::correct Finished correcting. |
| 09-May-2025 20:25:55 | 2025-05-10 00:25:56 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:25:55 | test_tool_calibrater.py::calibrater_test::test_selectVisField |
| 09-May-2025 20:25:55 | Check that the field is properly selected by selectvis |
| 09-May-2025 20:25:55 | PASSED |
| 09-May-2025 20:25:55 | |
| 09-May-2025 20:25:57 | 2025-05-10 00:25:57 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:25:57 | 2025-05-10 00:25:57 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:25:57 | 2025-05-10 00:25:57 INFO Clearing all model records in MS header. |
| 09-May-2025 20:25:57 | 2025-05-10 00:25:57 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:25:58 | 2025-05-10 00:25:59 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:25:59 | 2025-05-10 00:25:59 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:25:59 | 2025-05-10 00:25:59 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:25:59 | 2025-05-10 00:25:59 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 09-May-2025 20:25:59 | 2025-05-10 00:25:59 INFO calibrater::reset Reseting solve/apply state |
| 09-May-2025 20:25:59 | 2025-05-10 00:25:59 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 09-May-2025 20:25:59 | 2025-05-10 00:25:59 INFO Calibrater::selectvis+ Selecting on intent: '*AMPLI*' |
| 09-May-2025 20:25:59 | 2025-05-10 00:25:59 INFO Calibrater::selectvis Selection did not drop any rows |
| 09-May-2025 20:25:59 | 2025-05-10 00:25:59 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 09-May-2025 20:25:59 | 2025-05-10 00:25:59 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 09-May-2025 20:25:59 | 2025-05-10 00:25:59 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 09-May-2025 20:25:59 | 2025-05-10 00:25:59 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 09-May-2025 20:25:59 | 2025-05-10 00:25:59 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:25:59 | 2025-05-10 00:25:59 INFO calibrater::correct Beginning correct--------------------------- |
| 09-May-2025 20:25:59 | 2025-05-10 00:25:59 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 09-May-2025 20:25:59 | 2025-05-10 00:25:59 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:26:02 | 2025-05-10 00:26:02 INFO calibrater::correct Finished correcting. |
| 09-May-2025 20:26:02 | 2025-05-10 00:26:02 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:26:02 | test_tool_calibrater.py::calibrater_test::test_selectVisIntent |
| 09-May-2025 20:26:02 | Check that the intent is properly selected by selectvis |
| 09-May-2025 20:26:02 | PASSED |
| 09-May-2025 20:26:02 | |
| 09-May-2025 20:26:03 | 2025-05-10 00:26:04 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:26:03 | 2025-05-10 00:26:04 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:26:03 | 2025-05-10 00:26:04 INFO Clearing all model records in MS header. |
| 09-May-2025 20:26:03 | 2025-05-10 00:26:04 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:26:05 | 2025-05-10 00:26:05 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:26:05 | 2025-05-10 00:26:06 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:26:05 | 2025-05-10 00:26:06 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:26:05 | 2025-05-10 00:26:06 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 09-May-2025 20:26:05 | 2025-05-10 00:26:06 INFO calibrater::reset Reseting solve/apply state |
| 09-May-2025 20:26:05 | 2025-05-10 00:26:06 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 09-May-2025 20:26:05 | 2025-05-10 00:26:06 INFO Calibrater::selectvis+ Selecting by observation IDs: '0' |
| 09-May-2025 20:26:05 | 2025-05-10 00:26:06 INFO Calibrater::selectvis By selection 328860 rows are reduced to 318870 |
| 09-May-2025 20:26:05 | 2025-05-10 00:26:06 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 09-May-2025 20:26:05 | 2025-05-10 00:26:06 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 09-May-2025 20:26:05 | 2025-05-10 00:26:06 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 09-May-2025 20:26:05 | 2025-05-10 00:26:06 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 09-May-2025 20:26:05 | 2025-05-10 00:26:06 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:26:05 | 2025-05-10 00:26:06 INFO calibrater::correct Beginning correct--------------------------- |
| 09-May-2025 20:26:05 | 2025-05-10 00:26:06 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 09-May-2025 20:26:05 | 2025-05-10 00:26:06 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:26:08 | 2025-05-10 00:26:08 INFO calibrater::correct Finished correcting. |
| 09-May-2025 20:26:08 | 2025-05-10 00:26:08 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:26:08 | test_tool_calibrater.py::calibrater_test::test_selectVisObs |
| 09-May-2025 20:26:08 | PASSED |
| 09-May-2025 20:26:08 | |
| 09-May-2025 20:26:09 | 2025-05-10 00:26:10 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:26:09 | 2025-05-10 00:26:10 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:26:09 | 2025-05-10 00:26:10 INFO Clearing all model records in MS header. |
| 09-May-2025 20:26:09 | 2025-05-10 00:26:10 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:26:11 | 2025-05-10 00:26:11 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:26:11 | 2025-05-10 00:26:12 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:26:11 | 2025-05-10 00:26:12 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:26:11 | 2025-05-10 00:26:12 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 09-May-2025 20:26:11 | 2025-05-10 00:26:12 INFO calibrater::reset Reseting solve/apply state |
| 09-May-2025 20:26:11 | 2025-05-10 00:26:12 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 09-May-2025 20:26:11 | 2025-05-10 00:26:12 INFO Calibrater::selectvis+ Selecting on scan: '2' |
| 09-May-2025 20:26:11 | 2025-05-10 00:26:12 INFO Calibrater::selectvis By selection 328860 rows are reduced to 15660 |
| 09-May-2025 20:26:11 | 2025-05-10 00:26:12 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 09-May-2025 20:26:11 | 2025-05-10 00:26:12 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 09-May-2025 20:26:11 | 2025-05-10 00:26:12 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 09-May-2025 20:26:11 | 2025-05-10 00:26:12 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 09-May-2025 20:26:11 | 2025-05-10 00:26:12 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:26:11 | 2025-05-10 00:26:12 INFO calibrater::correct Beginning correct--------------------------- |
| 09-May-2025 20:26:11 | 2025-05-10 00:26:12 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 09-May-2025 20:26:11 | 2025-05-10 00:26:12 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:26:11 | 2025-05-10 00:26:12 INFO calibrater::correct Finished correcting. |
| 09-May-2025 20:26:12 | 2025-05-10 00:26:13 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:26:12 | test_tool_calibrater.py::calibrater_test::test_selectVisScan |
| 09-May-2025 20:26:12 | Check tht the scan is properly selected by selectvis |
| 09-May-2025 20:26:12 | PASSED |
| 09-May-2025 20:26:12 | |
| 09-May-2025 20:26:13 | 2025-05-10 00:26:14 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:26:13 | 2025-05-10 00:26:14 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:26:13 | 2025-05-10 00:26:14 INFO Clearing all model records in MS header. |
| 09-May-2025 20:26:14 | 2025-05-10 00:26:14 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:26:15 | 2025-05-10 00:26:15 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:26:15 | 2025-05-10 00:26:16 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:26:15 | 2025-05-10 00:26:16 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:26:15 | 2025-05-10 00:26:16 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 09-May-2025 20:26:15 | 2025-05-10 00:26:16 INFO calibrater::reset Reseting solve/apply state |
| 09-May-2025 20:26:15 | 2025-05-10 00:26:16 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 09-May-2025 20:26:15 | 2025-05-10 00:26:16 INFO Calibrater::selectvis+ Selecting on spw: '0' |
| 09-May-2025 20:26:15 | 2025-05-10 00:26:16 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
| 09-May-2025 20:26:15 | 2025-05-10 00:26:16 INFO Calibrater::selectvis Frequency selection: |
| 09-May-2025 20:26:15 | 2025-05-10 00:26:16 INFO Calibrater::selectvis . Spw 0:0~7 (8 channels, step by 1) |
| 09-May-2025 20:26:15 | 2025-05-10 00:26:16 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 09-May-2025 20:26:15 | 2025-05-10 00:26:16 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 09-May-2025 20:26:15 | 2025-05-10 00:26:16 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 09-May-2025 20:26:16 | 2025-05-10 00:26:16 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:26:16 | 2025-05-10 00:26:16 INFO calibrater::correct Beginning correct--------------------------- |
| 09-May-2025 20:26:16 | 2025-05-10 00:26:16 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 09-May-2025 20:26:16 | 2025-05-10 00:26:16 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:26:16 | 2025-05-10 00:26:17 INFO calibrater::correct Finished correcting. |
| 09-May-2025 20:26:17 | 2025-05-10 00:26:18 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:26:17 | test_tool_calibrater.py::calibrater_test::test_selectVisSpw |
| 09-May-2025 20:26:17 | Check that spw is properly selected by selectvis |
| 09-May-2025 20:26:17 | PASSED |
| 09-May-2025 20:26:17 | |
| 09-May-2025 20:26:18 | 2025-05-10 00:26:19 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:26:18 | 2025-05-10 00:26:19 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:26:18 | 2025-05-10 00:26:19 INFO Clearing all model records in MS header. |
| 09-May-2025 20:26:19 | 2025-05-10 00:26:19 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:26:20 | 2025-05-10 00:26:20 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:26:20 | 2025-05-10 00:26:21 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:26:20 | 2025-05-10 00:26:21 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:26:20 | 2025-05-10 00:26:21 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 09-May-2025 20:26:20 | 2025-05-10 00:26:21 INFO calibrater::reset Reseting solve/apply state |
| 09-May-2025 20:26:20 | 2025-05-10 00:26:21 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 09-May-2025 20:26:20 | 2025-05-10 00:26:21 INFO Calibrater::selectvis+ Selecting on time: '>04:38:23' |
| 09-May-2025 20:26:20 | 2025-05-10 00:26:21 INFO Calibrater::selectvis By selection 328860 rows are reduced to 313200 |
| 09-May-2025 20:26:20 | 2025-05-10 00:26:21 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 09-May-2025 20:26:20 | 2025-05-10 00:26:21 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 09-May-2025 20:26:20 | 2025-05-10 00:26:21 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 09-May-2025 20:26:20 | 2025-05-10 00:26:21 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 09-May-2025 20:26:21 | 2025-05-10 00:26:21 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:26:21 | 2025-05-10 00:26:21 INFO calibrater::correct Beginning correct--------------------------- |
| 09-May-2025 20:26:21 | 2025-05-10 00:26:21 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 09-May-2025 20:26:21 | 2025-05-10 00:26:21 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:26:23 | 2025-05-10 00:26:23 INFO calibrater::correct Finished correcting. |
| 09-May-2025 20:26:24 | 2025-05-10 00:26:24 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:26:24 | test_tool_calibrater.py::calibrater_test::test_selectVisTime |
| 09-May-2025 20:26:24 | Check that time is properly selected by selectvis |
| 09-May-2025 20:26:24 | PASSED |
| 09-May-2025 20:26:24 | |
| 09-May-2025 20:26:24 | 2025-05-10 00:26:25 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:26:24 | 2025-05-10 00:26:25 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:26:24 | 2025-05-10 00:26:25 INFO Clearing all model records in MS header. |
| 09-May-2025 20:26:24 | 2025-05-10 00:26:25 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:26:26 | 2025-05-10 00:26:26 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:26:26 | 2025-05-10 00:26:27 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:26:26 | 2025-05-10 00:26:27 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:26:26 | 2025-05-10 00:26:27 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 09-May-2025 20:26:26 | 2025-05-10 00:26:27 INFO calibrater::reset Reseting solve/apply state |
| 09-May-2025 20:26:26 | 2025-05-10 00:26:27 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 09-May-2025 20:26:26 | 2025-05-10 00:26:27 INFO Calibrater::selectvis+ Selecting on uvrange: '> 500000lambda' |
| 09-May-2025 20:26:27 | 2025-05-10 00:26:27 INFO Calibrater::selectvis By selection 328860 rows are reduced to 103321 |
| 09-May-2025 20:26:27 | 2025-05-10 00:26:27 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 09-May-2025 20:26:27 | 2025-05-10 00:26:27 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 09-May-2025 20:26:27 | 2025-05-10 00:26:27 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 09-May-2025 20:26:27 | 2025-05-10 00:26:27 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 09-May-2025 20:26:27 | 2025-05-10 00:26:27 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:26:27 | 2025-05-10 00:26:27 INFO calibrater::correct Beginning correct--------------------------- |
| 09-May-2025 20:26:27 | 2025-05-10 00:26:27 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 09-May-2025 20:26:27 | 2025-05-10 00:26:27 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:26:29 | 2025-05-10 00:26:29 INFO calibrater::correct Finished correcting. |
| 09-May-2025 20:26:29 | 2025-05-10 00:26:30 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:26:30 | test_tool_calibrater.py::calibrater_test::test_selectVisUVrange |
| 09-May-2025 20:26:30 | Check that selectvis properly selects for uvrange |
| 09-May-2025 20:26:30 | PASSED |
| 09-May-2025 20:26:30 | |
| 09-May-2025 20:26:30 | 2025-05-10 00:26:30 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:26:30 | 2025-05-10 00:26:30 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:26:30 | 2025-05-10 00:26:30 INFO Clearing all model records in MS header. |
| 09-May-2025 20:26:30 | 2025-05-10 00:26:30 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:26:31 | 2025-05-10 00:26:32 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:26:32 | 2025-05-10 00:26:32 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:26:32 | 2025-05-10 00:26:32 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:26:32 | 2025-05-10 00:26:32 INFO calibrater::parsecallibfile Beginning parsecallibfile-)------- |
| 09-May-2025 20:26:32 | 2025-05-10 00:26:32 INFO calibrater::setcallib Beginning setcallib--------- |
| 09-May-2025 20:26:32 | 2025-05-10 00:26:32 INFO Calibrater::setcallib2(callib) Arranging to APPLY: |
| 09-May-2025 20:26:32 | 2025-05-10 00:26:32 INFO . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 09-May-2025 20:26:32 | 2025-05-10 00:26:32 INFO . 0: |
| 09-May-2025 20:26:32 | 2025-05-10 00:26:32 INFO + MS: obs= scan= fld= intent= spw= |
| 09-May-2025 20:26:32 | 2025-05-10 00:26:32 INFO + CT: tinterp=linear finterp= |
| 09-May-2025 20:26:32 | 2025-05-10 00:26:32 INFO + obsmap=[] scanmap=[] fldmap=[] |
| 09-May-2025 20:26:32 | 2025-05-10 00:26:32 INFO + spwmap=[] antmap=[] |
| 09-May-2025 20:26:32 | 2025-05-10 00:26:32 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 09-May-2025 20:26:32 | 2025-05-10 00:26:32 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 09-May-2025 20:26:32 | 2025-05-10 00:26:32 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 09-May-2025 20:26:34 | 2025-05-10 00:26:34 INFO calibrater::corrupt Finished corrupting. |
| 09-May-2025 20:26:35 | 2025-05-10 00:26:35 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:26:35 | test_tool_calibrater.py::calibrater_test::test_setCalLib |
| 09-May-2025 20:26:35 | Check that a provided cal table can be used to corrupt the MODEL_DATA |
| 09-May-2025 20:26:35 | PASSED |
| 09-May-2025 20:26:35 | |
| 09-May-2025 20:26:35 | 2025-05-10 00:26:36 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:26:35 | 2025-05-10 00:26:36 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:26:35 | 2025-05-10 00:26:36 INFO Clearing all model records in MS header. |
| 09-May-2025 20:26:35 | 2025-05-10 00:26:36 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:26:37 | 2025-05-10 00:26:37 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:26:37 | 2025-05-10 00:26:38 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:26:37 | 2025-05-10 00:26:38 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:26:37 | 2025-05-10 00:26:38 INFO Calibrater::setCorrDepFlags Setting correlation dependent flags = True |
| 09-May-2025 20:26:37 | 2025-05-10 00:26:38 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:26:37 | test_tool_calibrater.py::calibrater_test::test_setCorrDepFlags |
| 09-May-2025 20:26:37 | Check that corrdepflags will be checked |
| 09-May-2025 20:26:37 | PASSED |
| 09-May-2025 20:26:37 | |
| 09-May-2025 20:26:38 | 2025-05-10 00:26:38 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:26:38 | 2025-05-10 00:26:38 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 09-May-2025 20:26:38 | 2025-05-10 00:26:38 INFO Clearing all model records in MS header. |
| 09-May-2025 20:26:38 | 2025-05-10 00:26:38 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:26:38 | 2025-05-10 00:26:39 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:26:38 | 2025-05-10 00:26:39 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 09-May-2025 20:26:38 | 2025-05-10 00:26:39 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:26:38 | 2025-05-10 00:26:39 INFO calibrater::smooth Beginning smooth--(MSSelection version)------- |
| 09-May-2025 20:26:38 | 2025-05-10 00:26:39 INFO Calibrater::smooth Beginning smoothing/interpolating method. |
| 09-May-2025 20:26:38 | 2025-05-10 00:26:39 WARN Found pre-v4.1 caltable (/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ngc5921.gcal); attempting to update... |
| 09-May-2025 20:26:38 | 2025-05-10 00:26:39 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
| 09-May-2025 20:26:39 | 2025-05-10 00:26:39 INFO Calibrater::smooth Storing result in testcalout.cal |
| 09-May-2025 20:26:39 | 2025-05-10 00:26:39 INFO Writing solutions to table: testcalout.cal |
| 09-May-2025 20:26:40 | 2025-05-10 00:26:41 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:26:40 | test_tool_calibrater.py::calibrater_test::test_smoothedCalTables |
| 09-May-2025 20:26:40 | Check that the smooth command creates a smoothed cal table |
| 09-May-2025 20:26:40 | PASSED |
| 09-May-2025 20:26:40 | |
| 09-May-2025 20:26:40 | 2025-05-10 00:26:41 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 09-May-2025 20:26:40 | 2025-05-10 00:26:41 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 09-May-2025 20:26:40 | 2025-05-10 00:26:41 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 09-May-2025 20:26:40 | 2025-05-10 00:26:41 INFO Clearing all model records in MS header. |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO calibrater::setsolvebandpoly Beginning setsolvebandpoly--(MSSelection version)------- |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO Calibrater::setsolvebandpoly Arranging to SOLVE: |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO Calibrater::setsolvebandpoly . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO calibrater::solve Beginning solve----------------------------- |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO Calibrater::solve . (None) |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO Calibrater::solve . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO Calibrater::solve Solving for BPOLY |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO For solint = inf, found 7 solution intervals. |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.059507/0.0681762/0.0765806 |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:41 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.336529/0.750193/1.6779 |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0630839/0.0689061/0.0756384 |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.279482/0.74979/1.59355 |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 09-May-2025 20:26:41 | 2025-05-10 00:26:42 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0672607/0.089081/0.111106 |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.31075/3.32219/4.29305 |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0652822/0.0889198/0.116912 |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:42 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:43 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.44269/3.26616/4.3519 |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:43 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:43 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:43 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:43 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:43 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:43 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:43 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:43 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:43 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:43 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:43 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:43 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350681/0.587724/0.894558 |
| 09-May-2025 20:26:42 | 2025-05-10 00:26:43 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 09-May-2025 20:26:44 | 2025-05-10 00:26:44 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.296/59.0077/111.454 |
| 09-May-2025 20:26:44 | 2025-05-10 00:26:44 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 09-May-2025 20:26:44 | 2025-05-10 00:26:44 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.354236/0.581733/0.988903 |
| 09-May-2025 20:26:44 | 2025-05-10 00:26:44 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 17.2419/56.3249/117.264 |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0850169/0.113968/0.15276 |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.67561/5.33243/8.17296 |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0784236/0.114345/0.159908 |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:46 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.46392/5.27232/7.20673 |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0703936/0.102501/0.131676 |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.98728/4.47977/5.84264 |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0751114/0.102994/0.138529 |
| 09-May-2025 20:26:46 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 09-May-2025 20:26:47 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.18629/4.47068/5.8941 |
| 09-May-2025 20:26:47 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 09-May-2025 20:26:47 | 2025-05-10 00:26:47 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 09-May-2025 20:26:47 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 09-May-2025 20:26:47 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 09-May-2025 20:26:47 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 09-May-2025 20:26:47 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 09-May-2025 20:26:47 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 09-May-2025 20:26:47 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 09-May-2025 20:26:47 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 09-May-2025 20:26:47 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 09-May-2025 20:26:47 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 09-May-2025 20:26:47 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350626/0.604424/0.974388 |
| 09-May-2025 20:26:47 | 2025-05-10 00:26:47 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 09-May-2025 20:26:49 | 2025-05-10 00:26:49 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.2542/59.3511/120.719 |
| 09-May-2025 20:26:49 | 2025-05-10 00:26:49 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 09-May-2025 20:26:49 | 2025-05-10 00:26:49 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.382806/0.598119/0.941571 |
| 09-May-2025 20:26:49 | 2025-05-10 00:26:49 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 09-May-2025 20:26:50 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 20.0637/57.2112/118.101 |
| 09-May-2025 20:26:50 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 09-May-2025 20:26:50 | 2025-05-10 00:26:51 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 09-May-2025 20:26:50 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 09-May-2025 20:26:50 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 09-May-2025 20:26:50 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 09-May-2025 20:26:50 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 09-May-2025 20:26:50 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 09-May-2025 20:26:50 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 09-May-2025 20:26:50 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 09-May-2025 20:26:50 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 09-May-2025 20:26:50 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 09-May-2025 20:26:50 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0750931/0.0978998/0.125897 |
| 09-May-2025 20:26:50 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 09-May-2025 20:26:51 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.72932/3.98787/5.33715 |
| 09-May-2025 20:26:51 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 09-May-2025 20:26:51 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0658572/0.0972125/0.140794 |
| 09-May-2025 20:26:51 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 09-May-2025 20:26:51 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.97943/3.97841/5.72903 |
| 09-May-2025 20:26:51 | 2025-05-10 00:26:51 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 09-May-2025 20:26:51 | 2025-05-10 00:26:51 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 09-May-2025 20:26:51 | 2025-05-10 00:26:51 INFO Calibrater::solve Found good BPOLY solutions in 7 slots. |
| 09-May-2025 20:26:51 | 2025-05-10 00:26:51 INFO calibrater::solve Finished solving. |
| 09-May-2025 20:26:51 | 2025-05-10 00:26:52 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 09-May-2025 20:26:51 | test_tool_calibrater.py::calibrater_test::test_solveBandpass |
| 09-May-2025 20:26:51 | Check that solve band poly creates the output table |
| 09-May-2025 20:26:51 | PASSED |
| 09-May-2025 20:26:51 | |
| 09-May-2025 20:26:51 | 2025-05-10 00:26:52 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 09-May-2025 20:26:51 | 2025-05-10 00:26:52 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 09-May-2025 20:26:51 | 2025-05-10 00:26:52 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 09-May-2025 20:26:51 | 2025-05-10 00:26:52 INFO Clearing all model records in MS header. |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO calibrater::setsolvegainspline Beginning setsolvegainspline--(MSSelection version)------- |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO Calibrater::setsolvegainspline Arranging to SOLVE: |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO Calibrater::setsolvegainspline . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO calibrater::solve Beginning solve----------------------------- |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO Calibrater::solve . (None) |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO Calibrater::solve . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO GJonesSpline::solve() Fitting time-dependent cubic splines. |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO GJonesSpline::solve() Solving for phase splines with splinetime= 10800 |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO GJonesSpline::solve() Solving for amplitude splines with splinetime= 10800 |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO GJonesSpline::solve() Accumulating data for: field= 1331+30500002_0, spw= 0, nchan= 63 |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63 |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:52 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63 |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:53 INFO GJonesSpline::solve() Number of timestamps in data = 60 |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:53 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec. |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:53 INFO GJonesSpline::solve() Number of cubic spline control points = 4 |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:53 INFO GJonesSpline::solve() Number of cubic spline knots = 8 |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:53 INFO GJonesSpline::solve() Number of cubic spline segments = 1 |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:53 INFO GJonesSpline::solve() Fitting amplitude spline. |
| 09-May-2025 20:26:52 | test_tool_calibrater.py::calibrater_test::test_solveGainspline DPBTRF ;problem leading minor 23 |
| 09-May-2025 20:26:52 | DPBTRF ;problem leading minor 23 |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:53 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline. |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:53 INFO GJonesSpline::solve() Fitting phase spline. |
| 09-May-2025 20:26:52 | DPBTRF ;problem leading minor 22 |
| 09-May-2025 20:26:52 | DPBTRF ;problem leading minor 22 |
| 09-May-2025 20:26:52 | 2025-05-10 00:26:53 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline |
| 09-May-2025 20:26:53 | 2025-05-10 00:26:53 INFO calibrater::solve Finished solving. |
| 09-May-2025 20:26:53 | 2025-05-10 00:26:53 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 09-May-2025 20:26:53 | |
| 09-May-2025 20:26:53 | Check that solve gain spline creates the output table |
| 09-May-2025 20:26:53 | PASSED |
| 09-May-2025 20:26:53 | |
| 09-May-2025 20:26:53 | 2025-05-10 00:26:54 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:26:53 | 2025-05-10 00:26:54 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:26:53 | 2025-05-10 00:26:54 INFO Clearing all model records in MS header. |
| 09-May-2025 20:26:53 | 2025-05-10 00:26:54 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:26:55 | 2025-05-10 00:26:55 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:26:55 | 2025-05-10 00:26:56 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:26:55 | 2025-05-10 00:26:56 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:26:55 | 2025-05-10 00:26:56 INFO calibrater::specifycal Beginning specifycal----------------------- |
| 09-May-2025 20:26:55 | 2025-05-10 00:26:56 INFO Creating G Jones table from specified parameters. |
| 09-May-2025 20:26:55 | 2025-05-10 00:26:56 INFO Generating 'G' corrections. |
| 09-May-2025 20:26:55 | 2025-05-10 00:26:56 INFO Specified parameter(s) (per spw and pol) repeated on all antennas. |
| 09-May-2025 20:26:55 | 2025-05-10 00:26:56 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations. |
| 09-May-2025 20:26:55 | 2025-05-10 00:26:56 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9]) |
| 09-May-2025 20:26:55 | 2025-05-10 00:26:56 INFO Writing solutions to table: testcalout.cal |
| 09-May-2025 20:26:57 | 2025-05-10 00:26:57 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:26:57 | test_tool_calibrater.py::calibrater_test::test_specifyCal |
| 09-May-2025 20:26:57 | Check that specifycal can set values for specific spws and antennas |
| 09-May-2025 20:26:57 | PASSED |
| 09-May-2025 20:26:57 | |
| 09-May-2025 20:26:57 | 2025-05-10 00:26:58 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 09-May-2025 20:26:57 | 2025-05-10 00:26:58 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 09-May-2025 20:26:57 | 2025-05-10 00:26:58 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:26:57 | 2025-05-10 00:26:58 INFO Clearing all model records in MS header. |
| 09-May-2025 20:26:57 | 2025-05-10 00:26:58 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:26:59 | 2025-05-10 00:26:59 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO Calibrater::setsolve Arranging to SOLVE: |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO Calibrater::state The following calibration terms are arranged for apply: |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO Calibrater::state The following calibration term is arranged for solve: |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO calibrater::solve Beginning solve----------------------------- |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 09-May-2025 20:26:59 | 2025-05-10 00:27:00 INFO Solving for Mf Mueller |
| 09-May-2025 20:27:00 | 2025-05-10 00:27:00 INFO For solint = inf, found 84 solution intervals. |
| 09-May-2025 20:27:01 | 2025-05-10 00:27:02 INFO Found good Mf Mueller solutions in 84 intervals. |
| 09-May-2025 20:27:01 | 2025-05-10 00:27:02 INFO Writing solutions to table: output.ms |
| 09-May-2025 20:27:03 | 2025-05-10 00:27:03 INFO calibrater::solve Finished solving. |
| 09-May-2025 20:27:03 | 2025-05-10 00:27:03 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 09-May-2025 20:27:03 | test_tool_calibrater.py::calibrater_test::test_standardPath |
| 09-May-2025 20:27:03 | open setapply setsolve state solve close |
| 09-May-2025 20:27:03 | PASSED |
| 09-May-2025 20:27:03 | |
| 09-May-2025 20:27:03 | 2025-05-10 00:27:04 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:27:03 | 2025-05-10 00:27:04 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:27:03 | 2025-05-10 00:27:04 INFO Clearing all model records in MS header. |
| 09-May-2025 20:27:03 | 2025-05-10 00:27:04 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:05 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO name:: No table opened. |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: The Table Cache has the following 16 entries: |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO name:: No table opened. |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO showcache:: The Table Cache is empty. |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:27:05 | test_tool_calibrater.py::calibrater_test::test_takesMs |
| 09-May-2025 20:27:05 | Check that the calibrater tool can open and close an MS |
| 09-May-2025 20:27:05 | PASSED |
| 09-May-2025 20:27:05 | |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 09-May-2025 20:27:05 | 2025-05-10 00:27:06 INFO Clearing all model records in MS header. |
| 09-May-2025 20:27:06 | 2025-05-10 00:27:06 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 09-May-2025 20:27:07 | 2025-05-10 00:27:08 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 09-May-2025 20:27:08 | 2025-05-10 00:27:08 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 09-May-2025 20:27:08 | 2025-05-10 00:27:08 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 09-May-2025 20:27:08 | 2025-05-10 00:27:08 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 09-May-2025 20:27:08 | 2025-05-10 00:27:08 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 09-May-2025 20:27:08 | 2025-05-10 00:27:08 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:27:08 | 2025-05-10 00:27:08 INFO calibrater::correct Beginning correct--------------------------- |
| 09-May-2025 20:27:08 | 2025-05-10 00:27:08 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 09-May-2025 20:27:08 | 2025-05-10 00:27:08 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 09-May-2025 20:27:10 | 2025-05-10 00:27:11 INFO calibrater::correct Finished correcting. |
| 09-May-2025 20:27:10 | 2025-05-10 00:27:11 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 09-May-2025 20:27:10 | test_tool_calibrater.py::calibrater_test::test_writeToCorrected |
| 09-May-2025 20:27:10 | Check that the tool writes to the CORRECTED_DATA column |
| 09-May-2025 20:27:10 | PASSED |
| 09-May-2025 20:27:10 | |
| 09-May-2025 20:27:10 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml - |
| 09-May-2025 20:27:10 | ================== 24 passed, 1 warning in 120.64s (0:02:00) =================== |
| 09-May-2025 20:27:11 | ============================= test session starts ============================== |
| 09-May-2025 20:27:11 | platform linux -- Python 3.8.7, pytest-8.3.5, pluggy-1.5.0 -- /home/casatest/venv/bin/python3.8 |
| 09-May-2025 20:27:11 | cachedir: .pytest_cache |
| 09-May-2025 20:27:11 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims |
| 09-May-2025 20:27:11 | configfile: pytest.ini |
| 09-May-2025 20:27:11 | collecting ... collected 1 item |
| 09-May-2025 20:27:11 | |
| 09-May-2025 20:27:11 | |
| 09-May-2025 20:27:12 | 2025-05-10 00:27:12 INFO ms::createmultims Copying subtables from part1.ms to the other MMS members. |
| 09-May-2025 20:27:19 | 2025-05-10 00:27:20 INFO name:: No table opened. |
| 09-May-2025 20:27:19 | 2025-05-10 00:27:20 INFO name:: No table opened. |
| 09-May-2025 20:27:19 | test_tool_ms_createmultims.py::test_createmultims::test1 |
| 09-May-2025 20:27:19 | Test_createmultims 1: 4 parts, same sources but different spws |
| 09-May-2025 20:27:19 | Copying part1.ms |
| 09-May-2025 20:27:19 | Copying part2-mod.ms |
| 09-May-2025 20:27:19 | Copying part2-mod2.ms |
| 09-May-2025 20:27:19 | Copying part2.ms |
| 09-May-2025 20:27:19 | Copying part3.ms |
| 09-May-2025 20:27:19 | Copying part4.ms |
| 09-May-2025 20:27:19 | PASSED |
| 09-May-2025 20:27:19 | |
| 09-May-2025 20:27:19 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_createmultims/nose.xml - |
| 09-May-2025 20:27:19 | ========================= 1 passed, 1 warning in 8.49s ========================= |
| 09-May-2025 20:27:20 | ============================= test session starts ============================== |
| 09-May-2025 20:27:20 | platform linux -- Python 3.8.7, pytest-8.3.5, pluggy-1.5.0 -- /home/casatest/venv/bin/python3.8 |
| 09-May-2025 20:27:20 | cachedir: .pytest_cache |
| 09-May-2025 20:27:20 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation |
| 09-May-2025 20:27:20 | configfile: pytest.ini |
| 09-May-2025 20:27:20 | collecting ... collected 8 items |
| 09-May-2025 20:27:20 | |
| 09-May-2025 20:27:20 | |
| 09-May-2025 20:27:20 | 2025-05-10 00:27:21 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing NPTS using the classical algorithm around each of 10000 grid points in 2 planes. |
| 09-May-2025 20:27:20 | 2025-05-10 00:27:21 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 09-May-2025 20:27:21 | 2025-05-10 00:27:21 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 10000 grid points in 2 planes. |
| 09-May-2025 20:27:21 | 2025-05-10 00:27:21 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 09-May-2025 20:27:21 | 2025-05-10 00:27:21 INFO name:: No table opened. |
| 09-May-2025 20:27:21 | 2025-05-10 00:27:21 INFO showcache:: The Table Cache is empty. |
| 09-May-2025 20:27:21 | 2025-05-10 00:27:21 INFO name:: No table opened. |
| 09-May-2025 20:27:21 | 2025-05-10 00:27:21 INFO name:: No table opened. |
| 09-May-2025 20:27:21 | test_tool_image_deviation.py::ia_deviation_test::test001 |
| 09-May-2025 20:27:21 | Every pixel is a grid point |
| 09-May-2025 20:27:21 | PASSED |
| 09-May-2025 20:27:21 | |
| 09-May-2025 20:27:21 | 2025-05-10 00:27:21 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing NPTS using the classical algorithm around each of 10000 grid points in 2 planes. |
| 09-May-2025 20:27:21 | 2025-05-10 00:27:22 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 09-May-2025 20:27:21 | 2025-05-10 00:27:22 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 10000 grid points in 2 planes. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO name:: No table opened. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO showcache:: The Table Cache is empty. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO name:: No table opened. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO name:: No table opened. |
| 09-May-2025 20:27:22 | test_tool_image_deviation.py::ia_deviation_test::test002 |
| 09-May-2025 20:27:22 | Every pixel is a grid point with an offset, so should be the same result |
| 09-May-2025 20:27:22 | as test001 |
| 09-May-2025 20:27:22 | PASSED |
| 09-May-2025 20:27:22 | |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing NPTS using the classical algorithm around each of 1156 grid points in 2 planes. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 1156 grid points in 2 planes. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing NPTS using the classical algorithm around each of 1156 grid points in 2 planes. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 1156 grid points in 2 planes. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO name:: No table opened. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO showcache:: The Table Cache is empty. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO name:: No table opened. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO name:: No table opened. |
| 09-May-2025 20:27:22 | test_tool_image_deviation.py::ia_deviation_test::test003 |
| 09-May-2025 20:27:22 | Every third pixel is a grid point |
| 09-May-2025 20:27:22 | PASSED |
| 09-May-2025 20:27:22 | |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing NPTS using the classical algorithm around each of 1089 grid points in 2 planes. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:22 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 1089 grid points in 2 planes. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing NPTS using the classical algorithm around each of 1089 grid points in 2 planes. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 1089 grid points in 2 planes. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO name:: No table opened. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO showcache:: The Table Cache is empty. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO name:: No table opened. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO name:: No table opened. |
| 09-May-2025 20:27:22 | test_tool_image_deviation.py::ia_deviation_test::test005 |
| 09-May-2025 20:27:22 | Every third pixel is a grid point, using anchor [2,2] |
| 09-May-2025 20:27:22 | PASSED |
| 09-May-2025 20:27:22 | |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 10.001 pix x 10.001 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 11 pix x 11 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 64 grid points in 2 planes. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO ImageRegion::fromRecord Selected bounding box : |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO ImageRegion::fromRecord+ [5, 5, 0] to [85, 85, 1] (00:03:00.021, -00.45.00.077, I to 23:57:39.990, +00.35.00.036, Q) |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 10.001 pix x 10.001 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 11 pix x 11 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 36 grid points in 2 planes. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO ImageRegion::fromRecord Selected bounding box : |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO ImageRegion::fromRecord+ [27, 27, 0] to [66, 66, 0] (00:01:32.003, -00.23.00.010, I to 23:58:55.999, +00.16.00.003, I) |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO ImageRegion::fromRecord Selected bounding box : |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO ImageRegion::fromRecord+ [22, 22, 0] to [61, 61, 0] (00:01:32.003, -00.23.00.010, I to 23:58:55.999, +00.16.00.003, I) |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO name:: No table opened. |
| 09-May-2025 20:27:22 | test_tool_image_deviation.py::ia_deviation_test::test006 |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO showcache:: The Table Cache is empty. |
| 09-May-2025 20:27:22 | Test that regions work as expected |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO name:: No table opened. |
| 09-May-2025 20:27:22 | 2025-05-10 00:27:23 INFO name:: No table opened. |
| 09-May-2025 20:27:22 | PASSED |
| 09-May-2025 20:27:22 | |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO ImageFactory::createImage Created Paged image 'mycirc.im' of shape [100, 100] with float valued pixels. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO StatImageCreator::useReferencePixelAsAnchor Anchor being set at pixel [50,50], at/near image reference pixel. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO StatImageCreator::_computeStat Using circular region of radius 20 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 41 pix x 41 pix and there are 1257 good pixels in the circle that are being used) to choose pixels for computing SUM using the classical algorithm around each of 25 grid points in 1 planes. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO StatImageCreator::_doInterpolation Interpolate using CUBIC algorithm. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO name:: No table opened. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO showcache:: The Table Cache is empty. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO name:: No table opened. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO name:: No table opened. |
| 09-May-2025 20:27:23 | test_tool_image_deviation.py::ia_deviation_test::test_circle |
| 09-May-2025 20:27:23 | test circles work correctly CAS-10296 |
| 09-May-2025 20:27:23 | PASSED |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO ImageFactory::createImage Created Temp image of shape [10, 10] with float valued pixels. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 9 grid points in 1 planes. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO ImageFactory::createImage Created Temp image of shape [10, 10, 2] with float valued pixels. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 9 grid points in 2 planes. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO StatImageCreator::_doInterpolation Interpolate using LINEAR algorithm. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO name:: No table opened. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO showcache:: The Table Cache is empty. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO name:: No table opened. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO name:: No table opened. |
| 09-May-2025 20:27:23 | test_tool_image_deviation.py::ia_deviation_test::test_mask |
| 09-May-2025 20:27:23 | PASSED |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO ImageFactory::createImage Created Temp image of shape [20, 20] with float valued pixels. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 25 grid points in 1 planes. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO StatImageCreator::_doInterpolation Interpolate using CUBIC algorithm. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO StatImageCreator::useReferencePixelAsAnchor Anchor being set at pixel [10,10], at/near image reference pixel. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO StatImageCreator::_computeStat Using rectangular region of specified dimensions 4 pix x 4 pix (because of centering and rounding to use whole pixels, actual dimensions of bounding box are 5 pix x 5 pix) to choose pixels for computing STDDEV using the classical algorithm around each of 25 grid points in 1 planes. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO StatImageCreator::_doInterpolation Interpolate using CUBIC algorithm. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO name:: No table opened. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO showcache:: The Table Cache is empty. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO name:: No table opened. |
| 09-May-2025 20:27:23 | 2025-05-10 00:27:23 INFO name:: No table opened. |
| 09-May-2025 20:27:23 | test_tool_image_deviation.py::ia_deviation_test::test_refpix |
| 09-May-2025 20:27:23 | Test using reference pixel |
| 09-May-2025 20:27:23 | PASSED |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_deviation/nose.xml - |
| 09-May-2025 20:27:23 | ========================= 8 passed, 1 warning in 3.38s ========================= |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
| 09-May-2025 20:27:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_linearmosaic/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 09-May-2025 20:27:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_rebin/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 09-May-2025 20:27:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msmetadata/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
| 09-May-2025 20:27:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_transpose/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 09-May-2025 20:27:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_sdm/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 09-May-2025 20:27:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_statwt/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 09-May-2025 20:27:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pv/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms/ |
| 09-May-2025 20:27:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms/ |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta/ |
| 09-May-2025 20:27:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_quanta/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta/ |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
| 09-May-2025 20:27:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msuvbinner/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys/ |
| 09-May-2025 20:27:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_coordsys/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys/ |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 09-May-2025 20:27:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_componentlist/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
| 09-May-2025 20:27:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_vpmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_table/ |
| 09-May-2025 20:27:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_table |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_table/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_table/ |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 09-May-2025 20:27:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
| 09-May-2025 20:27:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_createmultims/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
| 09-May-2025 20:27:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation |
| 09-May-2025 20:27:23 | |
| 09-May-2025 20:27:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_deviation/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
| 09-May-2025 20:27:26 | total 177332 |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci 15001 129299 May 9 23:57 casatestutils-6.6.6.13a100.dev0+dirty-py3-none-any.whl |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci 15001 181292645 May 9 23:57 casatools-6.6.6.13a100.dev0+dirty-cp38-cp38-manylinux_2_28_x86_64.whl |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 4320 May 10 00:27 test_tool_agentflagger.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 986 May 10 00:27 test_tool_calanalysis.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 2638 May 10 00:27 test_tool_calibrater.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 667 May 10 00:27 test_tool_componentlist.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 7447 May 10 00:27 test_tool_coordsys.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 12917 May 10 00:27 test_tool_image.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 2201 May 10 00:27 test_tool_image_collapse.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 1028 May 10 00:27 test_tool_image_deviation.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 2556 May 10 00:27 test_tool_image_fitprofile.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 1159 May 10 00:27 test_tool_image_pbcor.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 864 May 10 00:27 test_tool_image_pv.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 986 May 10 00:27 test_tool_image_rebin.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 1316 May 10 00:27 test_tool_image_regrid.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 1513 May 10 00:27 test_tool_image_statistics.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 746 May 10 00:27 test_tool_image_subimage.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 870 May 10 00:27 test_tool_image_transpose.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 1946 May 10 00:27 test_tool_imagepol.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 819 May 10 00:27 test_tool_linearmosaic.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 648 May 10 00:27 test_tool_logsink.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 529 May 10 00:27 test_tool_measures.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 5204 May 10 00:27 test_tool_ms.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 347 May 10 00:27 test_tool_ms_createmultims.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 2075 May 10 00:27 test_tool_ms_statwt.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 8613 May 10 00:27 test_tool_msmetadata.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 339 May 10 00:27 test_tool_msuvbinner.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 1151 May 10 00:27 test_tool_quanta.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 3957 May 10 00:27 test_tool_regionmanager.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 2053 May 10 00:27 test_tool_sdm.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 2083 May 10 00:27 test_tool_sdm_toms.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 429 May 10 00:27 test_tool_simulator.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 1442 May 10 00:27 test_tool_table.xml |
| 09-May-2025 20:27:26 | -rw-r--r-- 1 casaci root 1697 May 10 00:27 test_tool_vpmanager.xml |
| 09-May-2025 20:27:26 | Finished task 'Test wheel' with result: Success |
| 09-May-2025 20:27:26 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
| 09-May-2025 20:27:26 | Parsing test results under /export/home/cbt-el7-8/bamboohome/xml-data/build-dir/CASASPECS-CI128-TTOML228... |
| 09-May-2025 20:27:26 | Finished task 'Parse tests' with result: Success |
| 09-May-2025 20:27:26 | Starting task 'Cleanup' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
| 09-May-2025 20:27:26 | Beginning to execute external process for build 'CASASPECS - CI Build - CAS-14552 - Test Tools Many Linux 2.28 #2 (CASASPECS-CI128-TTOML228-2)' ... running command line: /export/home/cbt-el7-8/bamboohome/temp/CASASPECS-CI128-TTOML228-2-ScriptBuildTask-6196985793672098912.sh ... in: /export/home/cbt-el7-8/bamboohome/xml-data/build-dir/CASASPECS-CI128-TTOML228 |
| 09-May-2025 20:27:26 | Starting cleanup |
| 09-May-2025 20:27:38 | wheel-container-test |
| 09-May-2025 20:27:40 | wheel-container-test |
| 09-May-2025 20:27:40 | Cleanup complete |
| 09-May-2025 20:27:40 | Finished task 'Cleanup' with result: Success |
| 09-May-2025 20:27:40 | Running post build plugin 'Docker Container Cleanup' |
| 09-May-2025 20:27:40 | Beginning to execute external process for build 'CASASPECS - CI Build - CAS-14552 - Test Tools Many Linux 2.28 #2 (CASASPECS-CI128-TTOML228-2)' ... running command line: /bin/docker rm -f wheel-container-test ... in: /export/home/cbt-el7-8/bamboohome/xml-data/build-dir/CASASPECS-CI128-TTOML228 |
| 09-May-2025 20:27:40 | Error response from daemon: No such container: wheel-container-test |
| 09-May-2025 20:27:40 | Running post build plugin 'NCover Results Collector' |
| 09-May-2025 20:27:40 | Running post build plugin 'Build Results Label Collector' |
| 09-May-2025 20:27:40 | Running post build plugin 'Clover Results Collector' |
| 09-May-2025 20:27:40 | Running post build plugin 'npm Cache Cleanup' |
| 09-May-2025 20:27:40 | Running post build plugin 'Artifact Copier' |
| 09-May-2025 20:27:40 | Publishing an artifact: Tests |
| 09-May-2025 20:27:41 | Finished publishing of artifact Non required job artifact Http Compression On : [Tests], patterns: [*.xml] anchored at: [wheeldirectory/] in 380.2 ms |
| 09-May-2025 20:27:41 | Publishing an artifact: xml Directories |
| 09-May-2025 20:27:41 | Finished publishing of artifact Non required job artifact Http Compression On : [xml Directories], patterns: [**/*.xml] anchored at: [wheeldirectory/] in 310.1 ms |
| 09-May-2025 20:27:41 | Finalising the build... |
| 09-May-2025 20:27:41 | Stopping timer. |
| 09-May-2025 20:27:41 | Build CASASPECS-CI128-TTOML228-2 completed. |
| 09-May-2025 20:27:41 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
| 09-May-2025 20:27:41 | Running on server: post build plugin 'NCover Results Collector' |
| 09-May-2025 20:27:41 | Running on server: post build plugin 'Build Labeller' |
| 09-May-2025 20:27:41 | Running on server: post build plugin 'Clover Delta Calculator' |
| 09-May-2025 20:27:41 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
| 09-May-2025 20:27:41 | All post build plugins have finished |
| 09-May-2025 20:27:41 | Generating build results summary... |
| 09-May-2025 20:27:42 | Saving build results to disk... |
| 09-May-2025 20:27:42 | Store variable context... |
| 09-May-2025 20:27:42 | Finished building CASASPECS-CI128-TTOML228-2. |