Build: #357 was successful
Job: Test Tools Many Linux 2.28 was successful
Build log
The build generated 53,203 lines of output. The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:24 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:24 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.46392/5.27232/7.20673 |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:24 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:24 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:24 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:24 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:24 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:24 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:24 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:24 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:24 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:24 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:24 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:24 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0703936/0.102501/0.131676 |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:24 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.98728/4.47977/5.84264 |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0751114/0.102994/0.138529 |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.18629/4.47068/5.8941 |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350626/0.604424/0.974388 |
| 01-Oct-2026 11:54:24 | 2026-10-01 15:54:25 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 01-Oct-2026 11:54:26 | 2026-10-01 15:54:27 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.2542/59.3511/120.719 |
| 01-Oct-2026 11:54:26 | 2026-10-01 15:54:27 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 01-Oct-2026 11:54:26 | 2026-10-01 15:54:27 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.382806/0.598119/0.941571 |
| 01-Oct-2026 11:54:26 | 2026-10-01 15:54:27 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:28 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 20.0637/57.2112/118.101 |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:28 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:28 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:28 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:28 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:28 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:28 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:28 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:28 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:28 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:28 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:28 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:28 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0750931/0.0978998/0.125897 |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:28 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:29 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.72932/3.98787/5.33715 |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:29 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:29 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0658572/0.0972125/0.140794 |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:29 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:29 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.97943/3.97841/5.72903 |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:29 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:29 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:29 INFO Calibrater::solve Found good BPOLY solutions in 7 slots. |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:29 INFO calibrater::solve Finished solving. |
| 01-Oct-2026 11:54:28 | 2026-10-01 15:54:29 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 01-Oct-2026 11:54:28 | test_tool_calibrater.py::calibrater_test::test_solveBandpass |
| 01-Oct-2026 11:54:28 | Check that solve band poly creates the output table |
| 01-Oct-2026 11:54:28 | PASSED |
| 01-Oct-2026 11:54:28 | |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:29 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:29 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:29 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:29 INFO Clearing all model records in MS header. |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO calibrater::setsolvegainspline Beginning setsolvegainspline--(MSSelection version)------- |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO Calibrater::setsolvegainspline Arranging to SOLVE: |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO Calibrater::setsolvegainspline . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO calibrater::solve Beginning solve----------------------------- |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO Calibrater::solve . (None) |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO Calibrater::solve . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO GJonesSpline::solve() Fitting time-dependent cubic splines. |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO GJonesSpline::solve() Solving for phase splines with splinetime= 10800 |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO GJonesSpline::solve() Solving for amplitude splines with splinetime= 10800 |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO GJonesSpline::solve() Accumulating data for: field= 1331+30500002_0, spw= 0, nchan= 63 |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63 |
| 01-Oct-2026 11:54:29 | 2026-10-01 15:54:30 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63 |
| 01-Oct-2026 11:54:30 | 2026-10-01 15:54:30 INFO GJonesSpline::solve() Number of timestamps in data = 60 |
| 01-Oct-2026 11:54:30 | 2026-10-01 15:54:30 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec. |
| 01-Oct-2026 11:54:30 | 2026-10-01 15:54:30 INFO GJonesSpline::solve() Number of cubic spline control points = 4 |
| 01-Oct-2026 11:54:30 | 2026-10-01 15:54:30 INFO GJonesSpline::solve() Number of cubic spline knots = 8 |
| 01-Oct-2026 11:54:30 | 2026-10-01 15:54:30 INFO GJonesSpline::solve() Number of cubic spline segments = 1 |
| 01-Oct-2026 11:54:30 | 2026-10-01 15:54:30 INFO GJonesSpline::solve() Fitting amplitude spline. |
| 01-Oct-2026 11:54:30 | test_tool_calibrater.py::calibrater_test::test_solveGainspline DPBTRF ;problem leading minor 23 |
| 01-Oct-2026 11:54:30 | DPBTRF ;problem leading minor 23 |
| 01-Oct-2026 11:54:30 | 2026-10-01 15:54:30 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline. |
| 01-Oct-2026 11:54:30 | 2026-10-01 15:54:30 INFO GJonesSpline::solve() Fitting phase spline. |
| 01-Oct-2026 11:54:30 | DPBTRF ;problem leading minor 22 |
| 01-Oct-2026 11:54:30 | DPBTRF ;problem leading minor 22 |
| 01-Oct-2026 11:54:30 | 2026-10-01 15:54:30 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline |
| 01-Oct-2026 11:54:30 | 2026-10-01 15:54:30 INFO calibrater::solve Finished solving. |
| 01-Oct-2026 11:54:30 | 2026-10-01 15:54:30 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 01-Oct-2026 11:54:30 | |
| 01-Oct-2026 11:54:30 | Check that solve gain spline creates the output table |
| 01-Oct-2026 11:54:30 | PASSED |
| 01-Oct-2026 11:54:30 | |
| 01-Oct-2026 11:54:30 | 2026-10-01 15:54:30 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 01-Oct-2026 11:54:30 | 2026-10-01 15:54:30 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 01-Oct-2026 11:54:30 | 2026-10-01 15:54:30 INFO Clearing all model records in MS header. |
| 01-Oct-2026 11:54:30 | 2026-10-01 15:54:30 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 01-Oct-2026 11:54:31 | 2026-10-01 15:54:32 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 01-Oct-2026 11:54:31 | 2026-10-01 15:54:32 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 01-Oct-2026 11:54:31 | 2026-10-01 15:54:32 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 01-Oct-2026 11:54:31 | 2026-10-01 15:54:32 INFO calibrater::specifycal Beginning specifycal----------------------- |
| 01-Oct-2026 11:54:31 | 2026-10-01 15:54:32 INFO Creating G Jones table from specified parameters. |
| 01-Oct-2026 11:54:31 | 2026-10-01 15:54:32 INFO Generating 'G' corrections. |
| 01-Oct-2026 11:54:31 | 2026-10-01 15:54:32 INFO Specified parameter(s) (per spw and pol) repeated on all antennas. |
| 01-Oct-2026 11:54:31 | 2026-10-01 15:54:32 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations. |
| 01-Oct-2026 11:54:31 | 2026-10-01 15:54:32 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9]) |
| 01-Oct-2026 11:54:31 | 2026-10-01 15:54:32 INFO Writing solutions to table: testcalout.cal |
| 01-Oct-2026 11:54:32 | 2026-10-01 15:54:32 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 01-Oct-2026 11:54:32 | test_tool_calibrater.py::calibrater_test::test_specifyCal |
| 01-Oct-2026 11:54:32 | Check that specifycal can set values for specific spws and antennas |
| 01-Oct-2026 11:54:32 | PASSED |
| 01-Oct-2026 11:54:32 | |
| 01-Oct-2026 11:54:32 | 2026-10-01 15:54:32 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 01-Oct-2026 11:54:32 | 2026-10-01 15:54:32 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 01-Oct-2026 11:54:32 | 2026-10-01 15:54:32 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 01-Oct-2026 11:54:32 | 2026-10-01 15:54:32 INFO Clearing all model records in MS header. |
| 01-Oct-2026 11:54:32 | 2026-10-01 15:54:32 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 01-Oct-2026 11:54:33 | 2026-10-01 15:54:34 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 01-Oct-2026 11:54:33 | 2026-10-01 15:54:34 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 01-Oct-2026 11:54:33 | 2026-10-01 15:54:34 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 01-Oct-2026 11:54:34 | 2026-10-01 15:54:34 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 01-Oct-2026 11:54:34 | 2026-10-01 15:54:34 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 01-Oct-2026 11:54:34 | 2026-10-01 15:54:34 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 01-Oct-2026 11:54:34 | 2026-10-01 15:54:34 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 01-Oct-2026 11:54:34 | 2026-10-01 15:54:34 INFO Calibrater::setsolve Arranging to SOLVE: |
| 01-Oct-2026 11:54:34 | 2026-10-01 15:54:34 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 01-Oct-2026 11:54:34 | 2026-10-01 15:54:34 INFO Calibrater::state The following calibration terms are arranged for apply: |
| 01-Oct-2026 11:54:34 | 2026-10-01 15:54:34 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 01-Oct-2026 11:54:34 | 2026-10-01 15:54:34 INFO Calibrater::state The following calibration term is arranged for solve: |
| 01-Oct-2026 11:54:34 | 2026-10-01 15:54:34 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 01-Oct-2026 11:54:34 | 2026-10-01 15:54:34 INFO calibrater::solve Beginning solve----------------------------- |
| 01-Oct-2026 11:54:34 | 2026-10-01 15:54:34 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 01-Oct-2026 11:54:34 | 2026-10-01 15:54:34 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 01-Oct-2026 11:54:34 | 2026-10-01 15:54:34 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 01-Oct-2026 11:54:34 | 2026-10-01 15:54:34 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 01-Oct-2026 11:54:34 | 2026-10-01 15:54:34 INFO Solving for Mf Mueller |
| 01-Oct-2026 11:54:34 | 2026-10-01 15:54:34 INFO For solint = inf, found 84 solution intervals. |
| 01-Oct-2026 11:54:35 | 2026-10-01 15:54:36 INFO Found good Mf Mueller solutions in 84 intervals. |
| 01-Oct-2026 11:54:35 | 2026-10-01 15:54:36 INFO Writing solutions to table: output.ms |
| 01-Oct-2026 11:54:35 | 2026-10-01 15:54:36 INFO calibrater::solve Finished solving. |
| 01-Oct-2026 11:54:35 | 2026-10-01 15:54:36 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 01-Oct-2026 11:54:35 | test_tool_calibrater.py::calibrater_test::test_standardPath |
| 01-Oct-2026 11:54:35 | open setapply setsolve state solve close |
| 01-Oct-2026 11:54:35 | PASSED |
| 01-Oct-2026 11:54:35 | |
| 01-Oct-2026 11:54:36 | 2026-10-01 15:54:36 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 01-Oct-2026 11:54:36 | 2026-10-01 15:54:36 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 01-Oct-2026 11:54:36 | 2026-10-01 15:54:36 INFO Clearing all model records in MS header. |
| 01-Oct-2026 11:54:36 | 2026-10-01 15:54:36 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:37 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO name:: No table opened. |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: The Table Cache has the following 16 entries: |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO name:: No table opened. |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:37 | 2026-10-01 15:54:38 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 01-Oct-2026 11:54:37 | test_tool_calibrater.py::calibrater_test::test_takesMs |
| 01-Oct-2026 11:54:37 | Check that the calibrater tool can open and close an MS |
| 01-Oct-2026 11:54:37 | PASSED |
| 01-Oct-2026 11:54:37 | |
| 01-Oct-2026 11:54:38 | 2026-10-01 15:54:38 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 01-Oct-2026 11:54:38 | 2026-10-01 15:54:38 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 01-Oct-2026 11:54:38 | 2026-10-01 15:54:38 INFO Clearing all model records in MS header. |
| 01-Oct-2026 11:54:38 | 2026-10-01 15:54:38 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 01-Oct-2026 11:54:39 | 2026-10-01 15:54:39 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 01-Oct-2026 11:54:39 | 2026-10-01 15:54:40 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 01-Oct-2026 11:54:39 | 2026-10-01 15:54:40 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 01-Oct-2026 11:54:39 | 2026-10-01 15:54:40 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 01-Oct-2026 11:54:39 | 2026-10-01 15:54:40 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 01-Oct-2026 11:54:39 | 2026-10-01 15:54:40 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 01-Oct-2026 11:54:39 | 2026-10-01 15:54:40 INFO calibrater::correct Beginning correct--------------------------- |
| 01-Oct-2026 11:54:39 | 2026-10-01 15:54:40 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 01-Oct-2026 11:54:39 | 2026-10-01 15:54:40 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 01-Oct-2026 11:54:42 | 2026-10-01 15:54:42 INFO calibrater::correct Finished correcting. |
| 01-Oct-2026 11:54:42 | 2026-10-01 15:54:42 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 01-Oct-2026 11:54:42 | test_tool_calibrater.py::calibrater_test::test_writeToCorrected |
| 01-Oct-2026 11:54:42 | Check that the tool writes to the CORRECTED_DATA column |
| 01-Oct-2026 11:54:42 | PASSED |
| 01-Oct-2026 11:54:42 | |
| 01-Oct-2026 11:54:42 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml - |
| 01-Oct-2026 11:54:42 | =================== 24 passed, 1 warning in 96.19s (0:01:36) =================== |
| 01-Oct-2026 11:54:42 | ============================= test session starts ============================== |
| 01-Oct-2026 11:54:42 | platform linux -- Python 3.12.9, pytest-9.1.1, pluggy-1.6.0 -- /home/casatest/venv/bin/python3.12 |
| 01-Oct-2026 11:54:42 | cachedir: .pytest_cache |
| 01-Oct-2026 11:54:42 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator |
| 01-Oct-2026 11:54:42 | configfile: pytest.ini |
| 01-Oct-2026 11:54:43 | collecting ... collected 2 items |
| 01-Oct-2026 11:54:43 | |
| 01-Oct-2026 11:54:43 | |
| 01-Oct-2026 11:54:43 | test_tool_simulator.py::sm_settrop_test::test_smsettrop |
| 01-Oct-2026 11:54:43 | SKIPPED (Skipping due to intermittent failures) |
| 01-Oct-2026 11:54:43 | |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO NewMSSimulator::initAnt() Using global coordinates for the antennas |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO NewMSSimulator::initAnt() Added rows to ANTENNA table |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO MSsimulator::initFeeds() Added rows to FEED table |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO MSsimulator::initSpWindows() Creating new spectral window LBand, ID 1 |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO simulator::settimes() Times |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO simulator::settimes()+ Integration time 2000s |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO simulator::settimes() Times will be interpreted as hour angles for first source |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO NewMSSimulator::observe() First source: fake @ 19:53:50.00 +40.06.00.00 J2000 |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO NewMSSimulator::observe()+ Full time range: 03-Oct-2019/21:16:01.8 -- 04-Oct-2019/07:16:01.8 TAI with int = 2000 |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO NewMSSimulator::observe() Calculating a total of 18 integrations |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO Simulator::reset() Resetting all visibility corruption components |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO Simulator::reset() Reset all image-plane corruption components |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO AgentFlagger::open Table type is Measurement Set |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO AgentFlagger::initAgents There are initially 1 agents in the list. Agents: unflag |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO AgentFlagger::initAgents There are 1 valid agents in the list. Agents: unflag |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO FlagMSHandler:: Chunk = 1 [progress: 100%], Observation = 0, Array = 0, Scan = 1, Field = 0 (fake), Spw = 0, Channels = 5, Corrs = [ RR LL ], Total Rows = 6318 |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO Unflag::chunkSummary => Data unflagged so far 100% (63180/63180) |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO FlagMSHandler::nextChunk ==================================================================================== |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO Unflag::tableSummary => Percentage of data un-flagged in table selection: 100% |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO AgentFlagger::run => Writing flags to the MS |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO NewMSSimulator::NewMSSimulator(MeasurementSet& theMS) Opening MeasurementSet /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/myms.ms with 6318 rows |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO NewMSSimulator::NewMSSimulator(MeasurementSet& theMS) last spectral window ID = 1 |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO Simulator::predict() Predicting visibilities using model: [] and componentList: mycomplist.cl |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO Simulator::predict() The data column will be replaced |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO Simulator::getVPRecord Using default Voltage Patterns from the VPManager |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO Simulator::getVPRecord Temporary alert : The state of the vpmanager tool has been modified by loading these primary beam models. If any of your scripts rely on the vpmanager state being preserved throughout your CASA session, please use vp.saveastable() and vp.loadfromtable() as needed. |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO Simulator::createSkyEquation() Synthesis gridding |
| 01-Oct-2026 11:54:43 | 2026-10-01 15:54:44 INFO Simulator::createSkyEquation() Fourier transforms will use image centers as tangent points |
| 01-Oct-2026 11:54:44 | 2026-10-01 15:54:44 INFO Simulator::reset() Resetting all visibility corruption components |
| 01-Oct-2026 11:54:44 | 2026-10-01 15:54:44 INFO Simulator::reset() Reset all image-plane corruption components |
| 01-Oct-2026 11:54:44 | test_tool_simulator.py::sm_predict_test::test_plp |
| 01-Oct-2026 11:54:44 | CAS-13439 verify support for plp, spectral curvature model |
| 01-Oct-2026 11:54:44 | PASSED |
| 01-Oct-2026 11:54:44 | |
| 01-Oct-2026 11:54:44 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_simulator/nose.xml - |
| 01-Oct-2026 11:54:44 | =========================== short test summary info ============================ |
| 01-Oct-2026 11:54:44 | SKIPPED [1] test_tool_simulator.py:64: Skipping due to intermittent failures |
| 01-Oct-2026 11:54:44 | =================== 1 passed, 1 skipped, 1 warning in 1.11s ==================== |
| 01-Oct-2026 11:54:44 | ============================= test session starts ============================== |
| 01-Oct-2026 11:54:44 | platform linux -- Python 3.12.9, pytest-9.1.1, pluggy-1.6.0 -- /home/casatest/venv/bin/python3.12 |
| 01-Oct-2026 11:54:44 | cachedir: .pytest_cache |
| 01-Oct-2026 11:54:44 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse |
| 01-Oct-2026 11:54:44 | configfile: pytest.ini |
| 01-Oct-2026 11:54:44 | collecting ... collected 20 items |
| 01-Oct-2026 11:54:44 | |
| 01-Oct-2026 11:54:44 | |
| 01-Oct-2026 11:54:44 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:44 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:44 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:44 | 2026-10-01 15:54:45 INFO SubImageFactory::createImage Creating image 'test_1_0.im' of shape [1, 3, 3, 3] |
| 01-Oct-2026 11:54:44 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:44 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:44 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:44 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:44 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:44 | 2026-10-01 15:54:45 INFO SubImageFactory::createImage Creating image 'test_1_r.im' of shape [1, 3, 3, 3] |
| 01-Oct-2026 11:54:44 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:44 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:44 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO SubImageFactory::createImage Creating image 'test_1_right.im' of shape [1, 3, 3, 3] |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | test_tool_image_collapse.py::ia_collapse_test::test_1 |
| 01-Oct-2026 11:54:45 | ia.collapse(): average full image collapse along axis 0 |
| 01-Oct-2026 11:54:45 | PASSED |
| 01-Oct-2026 11:54:45 | |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO SubImageFactory::createImage Creating image 'test_2_2.im' of shape [3, 3, 1, 3] |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO SubImageFactory::createImage Creating image 'test_2_f.im' of shape [3, 3, 1, 3] |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO SubImageFactory::createImage Creating image 'test_2_freq.im' of shape [3, 3, 1, 3] |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | test_tool_image_collapse.py::ia_collapse_test::test_2 |
| 01-Oct-2026 11:54:45 | ia.collapse(): average full image collapse along axis 2 |
| 01-Oct-2026 11:54:45 | PASSED |
| 01-Oct-2026 11:54:45 | |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord+ [1, 1, 1, 1] to [2, 2, 2, 2] (04:46:00.548, +44.50.12.823, 5.1351e+09Hz, Q to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO SubImageFactory::createImage Creating image 'test_3.im' of shape [2, 1, 2, 2] |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord+ [1, 1, 1, 1] to [2, 2, 2, 2] (04:46:00.548, +44.50.12.823, 5.1351e+09Hz, Q to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 SEVERE image::collapse (file src/tools/image/image_cmpt.cc, line 712) Exception Reported: Exception: test_3.im is currently present in the table cache and so is being used by another process. Please close it in the other process first before attempting to overwrite it. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 SEVERE image::collapse (file src/tools/image/image_cmpt.cc, line 712)+ ... thrown by void casa::ImageTask<T>::_removeExistingFileIfNecessary(const casacore::String&, casacore::Bool, casacore::Bool) const [with T = float; casacore::Bool = bool] at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageTask.tcc, line: 137 |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord+ [1, 1, 1, 1] to [2, 2, 2, 2] (04:46:00.548, +44.50.12.823, 5.1351e+09Hz, Q to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO SubImageFactory::createImage Creating image 'test_3.im' of shape [2, 1, 2, 2] |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | test_tool_image_collapse.py::ia_collapse_test::test_3 |
| 01-Oct-2026 11:54:45 | ia.collapse(): average full image collapse along axis 2 and check output overwritability |
| 01-Oct-2026 11:54:45 | PASSED |
| 01-Oct-2026 11:54:45 | |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | test_tool_image_collapse.py::ia_collapse_test::test_4 |
| 01-Oct-2026 11:54:45 | ia.collapse(): not specifying an output image is ok |
| 01-Oct-2026 11:54:45 | PASSED |
| 01-Oct-2026 11:54:45 | |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 0, 2] (04:46:00.576, +44.50.12.522, 5.1351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.1351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | test_tool_image_collapse.py::ia_collapse_test::test_6 |
| 01-Oct-2026 11:54:45 | ia.collapse(): memory only images can be collapsed |
| 01-Oct-2026 11:54:45 | PASSED |
| 01-Oct-2026 11:54:45 | |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:45 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:45 | test_tool_image_collapse.py::ia_collapse_test::test_7 |
| 01-Oct-2026 11:54:45 | ia.collapse(): verify collapsing along multiple axes works |
| 01-Oct-2026 11:54:45 | PASSED |
| 01-Oct-2026 11:54:45 | |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageFITSConverterImpl::FITSToImage Created image of shape [3, 3, 3, 3] |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageFITSConverterImpl::FITSToImage Copy FITS file to '/home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse/collapse_in.im' All pixels fit in memory (81 pixels). |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageMaskHandler::_calcmask Created mask `mask0' |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO SubImageFactory::createImage Creating image 'test_8_0mean' of shape [3, 3, 3, 1] |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO SubImageFactory::createImage Creating image 'test_8_0median' of shape [3, 3, 3, 1] |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO SubImageFactory::createImage Creating image 'test_8_1mean' of shape [3, 3, 3, 1] |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO SubImageFactory::createImage Creating image 'test_8_1median' of shape [3, 3, 3, 1] |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO SubImageFactory::createImage Creating image 'test_8_2mean' of shape [3, 3, 3, 1] |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:45 | 2026-10-01 15:54:46 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO SubImageFactory::createImage Creating image 'test_8_2median' of shape [3, 3, 3, 1] |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | test_tool_image_collapse.py::ia_collapse_test::test_8 |
| 01-Oct-2026 11:54:46 | ia.collapse(): test both OTF and permanent masking works |
| 01-Oct-2026 11:54:46 | PASSED |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 2445] to [2, 2, 2555] (02:00:00.000, +30.00.00.000, 9.99142e+13Hz to 02:00:00.154, +30.00.02.000, 9.67228e+13Hz) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO AsciiRegionFileParser::_parse Combined 1 image regions (which excludes any annotation regions) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO AsciiRegionFileParser::_parse The specified region will select all pixels that are included in the region. Full pixels will be included even when they are only partially covered by the region(s). |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 2445] to [2, 2, 2555] (02:00:00.000, +30.00.00.000, 9.99142e+13Hz to 02:00:00.154, +30.00.02.000, 9.67228e+13Hz) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | test_tool_image_collapse.py::ia_collapse_test::test_CAS3737 |
| 01-Oct-2026 11:54:46 | ia.collapse(): test tabular spectral axis has correct collapsed reference value |
| 01-Oct-2026 11:54:46 | PASSED |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [0, 2, 2, 2] (04:46:00.548, +44.50.12.750, 4.7351e+09Hz, I to 04:46:00.548, +44.50.13.350, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 0, 2, 2] (04:46:00.576, +44.50.12.595, 4.7351e+09Hz, I to 04:46:00.520, +44.50.12.596, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 0, 2] (04:46:00.576, +44.50.12.522, 5.1351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.1351e+09Hz, U) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 0] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, I) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | test_tool_image_collapse.py::ia_collapse_test::test_CAS_3418 |
| 01-Oct-2026 11:54:46 | ia.collapse(): Test separate code for median due to performance issues |
| 01-Oct-2026 11:54:46 | PASSED |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageFactory::createImage Created Temp image of shape [10, 10, 10, 4] with float valued pixels. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set This image currently has no beams of any kind. Since channel and/or polarization were specified, a set of per plane beams, each equal to the specified beam, will be created. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 4 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 3 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 20 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 4 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 2 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 0 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 2.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 1 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 6 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 3 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 2 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 7 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 3.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 3 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 3 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 10 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 6 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 3.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 11 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 7 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 4 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 12 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 8 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 4.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 13 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 6 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 4 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 20 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 7 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 4.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 21 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 8 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 22 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 9 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 5.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 23 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 7 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 30 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 8 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 5.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 31 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 9 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 6 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 32 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 10 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 6.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 33 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 8 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 6 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 40 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 9 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 6.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 41 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 10 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 7 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 42 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 11 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 7.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 43 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 9 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 7 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 50 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 10 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 7.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 51 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 11 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 8 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 52 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 12 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 8.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 53 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 10 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 8 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 60 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 11 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 8.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 61 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 12 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 9 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 62 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 13 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 9.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 63 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 11 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 9 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 70 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 12 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 9.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 71 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 13 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 10 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 72 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 14 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 10.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 73 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 12 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 10 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 80 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 13 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 10.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 81 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 14 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 11 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 82 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 15 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 11.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 83 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 13 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 11 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 90 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 14 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 11.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 91 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 15 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 12 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 92 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 16 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 12.5 arcsec |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 93 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [1, 1, 1, 1] to [2, 2, 2, 2] (00:00:16.000, -00.04.00.000, 1.415e+09Hz, Q to 00:00:12.000, -00.03.00.000, 1.415e+09Hz, U) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 WARN ImageCollapser::_doMultipleBeams Input image has per plane beams but the collapse is not done exclusively along the direction axes. The output image will arbitrarily have a single beam which is the first beam available in the subimage.Thus, the image planes will not be convolved to a common restoring beam before collapsing. If, however, this is desired, then run the task imsmooth or the tool method ia.convolve2d() first, and use the output image of that as the input for collapsing. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | test_tool_image_collapse.py::ia_collapse_test::test_beams |
| 01-Oct-2026 11:54:46 | test per plane beams |
| 01-Oct-2026 11:54:46 | PASSED |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageFactory::createImage Created Temp image of shape [2, 2, 2] with Complex valued pixels. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0] to [1, 1, 1] (00:00:04.000, -00.01.00.000, I to 00:00:00.000, +00.00.00.000, Q) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0] to [1, 1, 0] (00:00:04.000, -00.01.00.000, I to 00:00:00.000, +00.00.00.000, I) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0] to [1, 1, 1] (00:00:04.000, -00.01.00.000, I to 00:00:00.000, +00.00.00.000, Q) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0] to [1, 1, 0] (00:00:04.000, -00.01.00.000, I to 00:00:00.000, +00.00.00.000, I) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | test_tool_image_collapse.py::ia_collapse_test::test_complex |
| 01-Oct-2026 11:54:46 | Test support for complex valued images |
| 01-Oct-2026 11:54:46 | PASSED |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 SEVERE image::open (file src/tools/image/image_cmpt.cc, line 4208) Exception Reported: Exception: File mybogus.im does not exist.. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 SEVERE image::open (file src/tools/image/image_cmpt.cc, line 4208)+ ... thrown by static void casa::ImageFactory::_checkInfile(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 375 |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 SEVERE image::collapse (file src/tools/image/image_cmpt.cc, line 712) Exception Reported: Exception: Aggregate function name is not specified and it must be.. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 SEVERE image::collapse (file src/tools/image/image_cmpt.cc, line 712)+ ... thrown by static casa::ImageCollapserData::AggregateType casa::ImageCollapserData::aggregateType(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageCollapserData.cc, line: 65 |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 SEVERE image::collapse (file src/tools/image/image_cmpt.cc, line 712) Exception Reported: Unknown aggregate function specified by bogus function at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageCollapserData.cc, line: 84 |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 WARN /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse/collapse_in.fits is not a valid or readable table |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 SEVERE Cannot read image /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse/collapse_in.fits to get region bogus_region |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 SEVERE image::collapse (file src/tools/image/image_cmpt.cc, line 712) Exception Reported: Unable to open region file or region table description bogus_region in image /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse/collapse_in.fits at File: /source/casa6/casatools/src/code/imageanalysis/Regions/CasacRegionManager.cc, line: 486 |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 SEVERE image::collapse (file src/tools/image/image_cmpt.cc, line 712) Exception Reported: Exception: box not specified correctly. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 SEVERE image::collapse (file src/tools/image/image_cmpt.cc, line 712)+ ... thrown by casacore::Record casa::CasacRegionManager::fromBCS(casacore::String&, casacore::uInt&, casacore::String&, const casacore::Record* const&, const casacore::String&, const casacore::String&, casa::CasacRegionManager::StokesControl, const casacore::String&, const casacore::IPosition&, const casacore::String&, casacore::Bool) at File: /source/casa6/casatools/src/code/imageanalysis/Regions/CasacRegionManager.cc, line: 232 |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO CasacRegionManager::_fromBCS dAxisNum0=0 dAxisNum1=1x=1000 imShape[0]=3 y=1000 imShape[1]=3 |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 SEVERE CasacRegionManager::_fromBCS trc in box spec is greater than or equal to number of direction coordinate pixels in the image |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 SEVERE image::collapse (file src/tools/image/image_cmpt.cc, line 712) Exception Reported: 2026-10-01 15:54:46 SEVERE CasacRegionManager::_fromBCS trc in box spec is greater than or equal to number of direction coordinate pixels in the image |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663) Multiple axes [right ascension,declination,frequency,stokes] match requested axis |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 SEVERE image::collapse (file src/tools/image/image_cmpt.cc, line 712) Exception Reported: 2026-10-01 15:54:46 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663) Multiple axes [right ascension,declination,frequency,stokes] match requested axis |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 SEVERE image::collapse (file src/tools/image/image_cmpt.cc, line 712) Exception Reported: Exception: Specified zero-based axis (10) must be less than the number of axes in /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse/collapse_in.fits(4). |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 SEVERE image::collapse (file src/tools/image/image_cmpt.cc, line 712)+ ... thrown by void casa::ImageCollapser<T>::_finishConstruction() [with T = float] at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageCollapser.tcc, line: 559 |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | test_tool_image_collapse.py::ia_collapse_test::test_exceptions |
| 01-Oct-2026 11:54:46 | ia.collapse: Test various exception cases |
| 01-Oct-2026 11:54:46 | PASSED |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageFactory::createImage Created Paged image 'flux_test.im' of shape [10, 10, 10] with float valued pixels. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0] to [9, 9, 9] (00:00:20.000, -00.05.00.000, 1.415e+09Hz to 23:59:44.000, +00.04.00.000, 1.415e+09Hz) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 SEVERE image::collapse (file src/tools/image/image_cmpt.cc, line 712) Exception Reported: Unable to calculate flux density: [] at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageCollapser.tcc, line: 433 |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Setting (global) restoring beam. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set Beam parameters: Major : 3 arcmin |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Minor : 3 arcmin |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO BeamManipulator::set+ Position Angle : 0 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0] to [9, 9, 9] (00:00:20.000, -00.05.00.000, 1.415e+09Hz to 23:59:44.000, +00.04.00.000, 1.415e+09Hz) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | test_tool_image_collapse.py::ia_collapse_test::test_flux |
| 01-Oct-2026 11:54:46 | Test flux function |
| 01-Oct-2026 11:54:46 | PASSED |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageFactory::createImage Created Temp image of shape [20, 20, 20] with float valued pixels. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0] to [19, 19, 19] (00:00:40.000, -00.10.00.001, 1.41499e+09Hz to 23:59:24.000, +00.09.00.001, 1.41501e+09Hz) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ::::ImageFactory::createImage Created Temp image of shape [20, 20, 20] with float valued pixels. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ::::image::fromshape Ran ia.fromshape |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ::::image::fromshape ia.fromshape(outfile="", shape=[20,20,20], csys={...}, linear=false, overwrite=false, log=true, type="f") |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ::::image::collapse Ran ia.collapse on Temporary_Image |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ::::image::collapse ia.collapse(function='mean', axes=2, outfile='', region='', box='', chans='', stokes='', mask='', overwrite=false, stretch=false) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:46 | test_tool_image_collapse.py::ia_collapse_test::test_history |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | Test history record is written |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | PASSED |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageFactory::createImage Created Paged image 'median.im' of shape [3, 3, 3] with float valued pixels. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0] to [2, 2, 2] (00:00:04.000, -00.01.00.000, I to 23:59:56.000, +00.01.00.000, U) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 0, 0] to [2, 2, 2] (00:00:04.000, -00.01.00.000, I to 23:59:56.000, +00.01.00.000, U) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageFactory::createImage Created Temp image of shape [20, 20, 5] with float valued pixels. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO AsciiRegionFileParser::_parse Combined 1 image regions (which excludes any annotation regions) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO AsciiRegionFileParser::_parse The specified region will select all pixels that are included in the region. Full pixels will be included even when they are only partially covered by the region(s). |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [5, 5, 0] to [15, 15, 4] (00:00:20.000, -00.05.00.000, 1.415e+09Hz to 23:59:40.000, +00.05.00.000, 1.415e+09Hz) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | test_tool_image_collapse.py::ia_collapse_test::test_median |
| 01-Oct-2026 11:54:46 | Test median when collapsing along multiple axes |
| 01-Oct-2026 11:54:46 | PASSED |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageFactory::createImage Created Temp image of shape [10, 10, 10] with float valued pixels. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageRegion::fromRecord+ [0, 4, 0] to [9, 6, 9] (00:00:20.000, -00.01.00.000, 1.415e+09Hz to 23:59:44.000, +00.01.00.000, 1.415e+09Hz) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | test_tool_image_collapse.py::ia_collapse_test::test_region |
| 01-Oct-2026 11:54:46 | ia.collapse(): Test region |
| 01-Oct-2026 11:54:46 | PASSED |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:46 INFO ImageFactory::createImage Created Temp image of shape [2, 2, 2] with float valued pixels. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO ImageRegion::fromRecord+ [0, 0, 0] to [1, 1, 1] (00:00:04.000, -00.01.00.000, I to 00:00:00.000, +00.00.00.000, Q) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO ImageRegion::fromRecord+ [0, 0, 0] to [1, 1, 1] (00:00:04.000, -00.01.00.000, I to 00:00:00.000, +00.00.00.000, Q) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | test_tool_image_collapse.py::ia_collapse_test::test_sqrtsum |
| 01-Oct-2026 11:54:46 | Test sqrtsum function |
| 01-Oct-2026 11:54:46 | PASSED |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO ImageFactory::createImage Created Temp image of shape [2, 2, 2] with float valued pixels. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO ImageRegion::fromRecord+ [0, 0, 0] to [1, 1, 1] (00:00:04.000, -00.01.00.000, I to 00:00:00.000, +00.00.00.000, Q) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO ImageRegion::fromRecord+ [0, 0, 0] to [1, 1, 1] (00:00:04.000, -00.01.00.000, I to 00:00:00.000, +00.00.00.000, Q) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | test_tool_image_collapse.py::ia_collapse_test::test_sqrtsum_npix |
| 01-Oct-2026 11:54:46 | Test sqrtsum function |
| 01-Oct-2026 11:54:46 | PASSED |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO ImageFactory::createImage Created Temp image of shape [2, 2, 2] with float valued pixels. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO BeamManipulator::set Setting (global) restoring beam. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO BeamManipulator::set Beam parameters: Major : 3 arcmin |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO BeamManipulator::set+ Minor : 3 arcmin |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO BeamManipulator::set+ Position Angle : 0 deg |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO ImageRegion::fromRecord+ [0, 0, 0] to [1, 1, 1] (00:00:04.000, -00.01.00.000, I to 00:00:00.000, +00.00.00.000, Q) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO ImageRegion::fromRecord+ [0, 0, 0] to [1, 1, 1] (00:00:04.000, -00.01.00.000, I to 00:00:00.000, +00.00.00.000, Q) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | test_tool_image_collapse.py::ia_collapse_test::test_sqrtsum_npix_beam |
| 01-Oct-2026 11:54:46 | Test sqrtsum function |
| 01-Oct-2026 11:54:46 | PASSED |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO ImageFactory::createImage Created Paged image 'ymask' of shape [3, 3, 1, 1] with float valued pixels. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO FITSCoordinateUtil::fromFITSHeader Neither SPECSYS nor VELREF keyword given, spectral reference frame not defined ... |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO ImageRegion::fromRecord Selected bounding box : |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [2, 2, 2, 2] (04:46:00.576, +44.50.12.522, 4.7351e+09Hz, I to 04:46:00.520, +44.50.13.123, 5.5351e+09Hz, U) |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO showcache:: The Table Cache is empty. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | 2026-10-01 15:54:47 INFO name:: No table opened. |
| 01-Oct-2026 11:54:46 | test_tool_image_collapse.py::ia_collapse_test::test_stretch |
| 01-Oct-2026 11:54:46 | ia.collapse(): Test stretch parameter |
| 01-Oct-2026 11:54:46 | PASSED |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_collapse/nose.xml - |
| 01-Oct-2026 11:54:46 | ======================== 20 passed, 1 warning in 2.20s ========================= |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_fitprofile/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_measures/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_measures |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_measures/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_measures/ |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pv/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pbcor/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_vpmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_regrid/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_linearmosaic/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_synthesisutils/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils/ |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calanalysis/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calanalysis |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calanalysis/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calanalysis/ |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms/ |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_createmultims/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_statwt/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_coordsys/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys/ |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msmetadata/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_simulator/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/ |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse/ |
| 01-Oct-2026 11:54:46 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse |
| 01-Oct-2026 11:54:46 | |
| 01-Oct-2026 11:54:46 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_collapse/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse/ |
| 01-Oct-2026 11:54:49 | total 77816 |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci 15001 161085 Oct 1 15:36 casatestutils-6.7.7.10+dirty-py3-none-any.whl |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci 15001 79350390 Oct 1 15:36 casatools-6.7.7.10+dirty-cp312-cp312-manylinux_2_28_x86_64.whl |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 4340 Oct 1 15:54 test_tool_agentflagger.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 1006 Oct 1 15:54 test_tool_calanalysis.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 2656 Oct 1 15:54 test_tool_calibrater.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 687 Oct 1 15:54 test_tool_componentlist.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 7467 Oct 1 15:54 test_tool_coordsys.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 12935 Oct 1 15:54 test_tool_image.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 2220 Oct 1 15:54 test_tool_image_collapse.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 1048 Oct 1 15:54 test_tool_image_deviation.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 2575 Oct 1 15:54 test_tool_image_fitprofile.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 1178 Oct 1 15:54 test_tool_image_pbcor.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 883 Oct 1 15:54 test_tool_image_pv.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 1006 Oct 1 15:54 test_tool_image_rebin.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 1336 Oct 1 15:54 test_tool_image_regrid.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 1641 Oct 1 15:54 test_tool_image_statistics.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 765 Oct 1 15:54 test_tool_image_subimage.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 890 Oct 1 15:54 test_tool_image_transpose.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 1966 Oct 1 15:54 test_tool_imagepol.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 839 Oct 1 15:54 test_tool_linearmosaic.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 669 Oct 1 15:54 test_tool_logsink.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 549 Oct 1 15:54 test_tool_measures.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 5224 Oct 1 15:54 test_tool_ms.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 367 Oct 1 15:54 test_tool_ms_createmultims.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 2095 Oct 1 15:54 test_tool_ms_statwt.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 8633 Oct 1 15:54 test_tool_msmetadata.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 359 Oct 1 15:54 test_tool_msuvbinner.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 1171 Oct 1 15:54 test_tool_quanta.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 3977 Oct 1 15:54 test_tool_regionmanager.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 2072 Oct 1 15:54 test_tool_sdm.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 2195 Oct 1 15:54 test_tool_sdm_toms.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 670 Oct 1 15:54 test_tool_simulator.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 1717 Oct 1 15:54 test_tool_synthesisutils.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 1462 Oct 1 15:54 test_tool_table.xml |
| 01-Oct-2026 11:54:49 | -rw-r--r-- 1 casaci root 1717 Oct 1 15:54 test_tool_vpmanager.xml |
| 01-Oct-2026 11:54:49 | Finished task 'Test wheel' with result: Success |
| 01-Oct-2026 11:54:49 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
| 01-Oct-2026 11:54:49 | Parsing test results under /export/home/cbt-el7-7/bamboohome/xml-data/build-dir/CASASPECS-CI-TTOML228... |
| 01-Oct-2026 11:54:49 | Finished task 'Parse tests' with result: Success |
| 01-Oct-2026 11:54:49 | Starting task 'Cleanup' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
| 01-Oct-2026 11:54:49 | Beginning to execute external process for build 'CASASPECS - CI Build - Test Tools Many Linux 2.28 #357 (CASASPECS-CI-TTOML228-357)' ... running command line: /export/home/cbt-el7-7/bamboohome/temp/CASASPECS-CI-TTOML228-357-ScriptBuildTask-1386291594199319381.sh ... in: /export/home/cbt-el7-7/bamboohome/xml-data/build-dir/CASASPECS-CI-TTOML228 |
| 01-Oct-2026 11:54:49 | Starting cleanup |
| 01-Oct-2026 11:55:00 | wheel-container-test |
| 01-Oct-2026 11:55:02 | wheel-container-test |
| 01-Oct-2026 11:55:02 | Cleanup complete |
| 01-Oct-2026 11:55:02 | Finished task 'Cleanup' with result: Success |
| 01-Oct-2026 11:55:02 | Running post build plugin 'Docker Container Cleanup' |
| 01-Oct-2026 11:55:02 | Beginning to execute external process for build 'CASASPECS - CI Build - Test Tools Many Linux 2.28 #357 (CASASPECS-CI-TTOML228-357)' ... running command line: /usr/bin/docker rm -f wheel-container-test ... in: /export/home/cbt-el7-7/bamboohome/xml-data/build-dir/CASASPECS-CI-TTOML228 |
| 01-Oct-2026 11:55:02 | Error response from daemon: No such container: wheel-container-test |
| 01-Oct-2026 11:55:02 | Running post build plugin 'NCover Results Collector' |
| 01-Oct-2026 11:55:02 | Running post build plugin 'Build Results Label Collector' |
| 01-Oct-2026 11:55:02 | Running post build plugin 'Clover Results Collector' |
| 01-Oct-2026 11:55:02 | Running post build plugin 'npm Cache Cleanup' |
| 01-Oct-2026 11:55:02 | Running post build plugin 'Artifact Copier' |
| 01-Oct-2026 11:55:02 | Publishing an artifact: Tests |
| 01-Oct-2026 11:55:02 | Finished publishing of artifact Non required job artifact Http Compression On : [Tests], patterns: [*.xml] anchored at: [wheeldirectory/] in 346.5 ms |
| 01-Oct-2026 11:55:02 | Publishing an artifact: xml Directories |
| 01-Oct-2026 11:55:02 | Finished publishing of artifact Non required job artifact Http Compression On : [xml Directories], patterns: [**/*.xml] anchored at: [wheeldirectory/] in 171.4 ms |
| 01-Oct-2026 11:55:02 | Finalising the build... |
| 01-Oct-2026 11:55:02 | Stopping timer. |
| 01-Oct-2026 11:55:02 | Build CASASPECS-CI-TTOML228-357 completed. |
| 01-Oct-2026 11:55:03 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
| 01-Oct-2026 11:55:03 | Running on server: post build plugin 'NCover Results Collector' |
| 01-Oct-2026 11:55:03 | Running on server: post build plugin 'Build Labeller' |
| 01-Oct-2026 11:55:03 | Running on server: post build plugin 'Clover Delta Calculator' |
| 01-Oct-2026 11:55:03 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
| 01-Oct-2026 11:55:03 | All post build plugins have finished |
| 01-Oct-2026 11:55:03 | Generating build results summary... |
| 01-Oct-2026 11:55:03 | Saving build results to disk... |
| 01-Oct-2026 11:55:03 | Store variable context... |
| 01-Oct-2026 11:55:03 | Finished building CASASPECS-CI-TTOML228-357. |