Build: #259 was successful
Job: Test Tools Many Linux 2.28 was successful
Build log
The build generated 53,145 lines of output. The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
| 25-Nov-2025 10:00:40 | 2025-11-25 15:00:41 INFO StatWtTVI::summarizeStats The mean of the computed weights is 5.55784 |
| 25-Nov-2025 10:00:40 | 2025-11-25 15:00:41 INFO StatWtTVI::summarizeStats The variance of the computed weights is 22.2368 |
| 25-Nov-2025 10:00:40 | 2025-11-25 15:00:41 INFO StatWtTVI::summarizeStats Weights which had corresponding flags of True prior to running this application were not used to compute these stats. |
| 25-Nov-2025 10:00:40 | 2025-11-25 15:00:41 INFO StatWtColConfig::_determineFlags Updating the WEIGHT/WEIGHT_SPECTRUM values. SIGMA/SIGMA_SPECTRUM values will not be recalculated as they are related to the values in the DATA column. |
| 25-Nov-2025 10:00:40 | 2025-11-25 15:00:41 SEVERE ms::statwt Exception Reported: Unsupported value for 'statalg' at File: /source/casa6/casatools/src/code/mstransform/TVI/StatWtTVI.cc, line: 406 |
| 25-Nov-2025 10:00:40 | 2025-11-25 15:00:41 INFO name:: No table opened. |
| 25-Nov-2025 10:00:40 | 2025-11-25 15:00:41 INFO name:: No table opened. |
| 25-Nov-2025 10:00:40 | test_tool_ms_statwt.py::statwt_test::test_statalg |
| 25-Nov-2025 10:00:40 | Test statalg |
| 25-Nov-2025 10:00:40 | PASSED |
| 25-Nov-2025 10:00:40 | |
| 25-Nov-2025 10:00:40 | 2025-11-25 15:00:41 INFO StatWtColConfig::_determineFlags Updating the WEIGHT/WEIGHT_SPECTRUM values. SIGMA/SIGMA_SPECTRUM values will not be recalculated as they are related to the values in the DATA column. |
| 25-Nov-2025 10:00:40 | 2025-11-25 15:00:41 INFO StatWtTVI::StatWtTVI Using CORRECTED_DATA to compute weights |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:41 INFO StatWtTVI::summarizeFlagging Originally, 18.197% of the data were flagged. StatWtTVI flagged an additional 0%. |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:41 INFO StatWtTVI::summarizeFlagging TOTAL FLAGGED DATA AFTER RUNNING STATWT: 18.197% |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:41 INFO StatWtTVI::summarizeFlagging |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:41 INFO StatWtTVI::summarizeFlagging SPECTRAL_WINDOW SAMPLES_WITH_NON-ZERO_VARIANCE SAMPLES_WHERE_REAL_PART_VARIANCE_DIFFERS_BY_>50%_FROM_IMAGINARY_PART |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:41 INFO StatWtTVI::summarizeFlagging 0 630 288 |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:41 INFO StatWtTVI::_logUsedChannels Weights are being computed using SPW 0, channels 0~62 |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:41 INFO StatWtTVI::summarizeStats The mean of the computed weights is 2.55491 |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:41 INFO StatWtTVI::summarizeStats The variance of the computed weights is 1.29512 |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:41 INFO StatWtTVI::summarizeStats Weights which had corresponding flags of True prior to running this application were not used to compute these stats. |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:41 INFO StatWtColConfig::_determineFlags Updating the WEIGHT/WEIGHT_SPECTRUM values. SIGMA/SIGMA_SPECTRUM values will not be recalculated as they are related to the values in the DATA column. |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:41 INFO StatWtTVI::StatWtTVI Using CORRECTED_DATA to compute weights |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::summarizeFlagging Originally, 18.197% of the data were flagged. StatWtTVI flagged an additional 0%. |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::summarizeFlagging TOTAL FLAGGED DATA AFTER RUNNING STATWT: 18.197% |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::summarizeFlagging |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::summarizeFlagging SPECTRAL_WINDOW SAMPLES_WITH_NON-ZERO_VARIANCE SAMPLES_WHERE_REAL_PART_VARIANCE_DIFFERS_BY_>50%_FROM_IMAGINARY_PART |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::summarizeFlagging 0 2700 948 |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::_logUsedChannels Weights are being computed using SPW 0, channels 0~62 |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::summarizeStats The mean of the computed weights is 2.50245 |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::summarizeStats The variance of the computed weights is 1.046 |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::summarizeStats Weights which had corresponding flags of True prior to running this application were not used to compute these stats. |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO name:: No table opened. |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO name:: No table opened. |
| 25-Nov-2025 10:00:41 | test_tool_ms_statwt.py::statwt_test::test_timebin |
| 25-Nov-2025 10:00:41 | Test time binning |
| 25-Nov-2025 10:00:41 | PASSED |
| 25-Nov-2025 10:00:41 | |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtColConfig::_determineFlags Updating the WEIGHT/WEIGHT_SPECTRUM values. SIGMA/SIGMA_SPECTRUM values will not be recalculated as they are related to the values in the DATA column. |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::StatWtTVI Using CORRECTED_DATA to compute weights |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::summarizeFlagging Originally, 18.197% of the data were flagged. StatWtTVI flagged an additional 59.4848%. |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::summarizeFlagging TOTAL FLAGGED DATA AFTER RUNNING STATWT: 77.6818% |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::summarizeFlagging |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::summarizeFlagging SPECTRAL_WINDOW SAMPLES_WITH_NON-ZERO_VARIANCE SAMPLES_WHERE_REAL_PART_VARIANCE_DIFFERS_BY_>50%_FROM_IMAGINARY_PART |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::summarizeFlagging 0 630 288 |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::_logUsedChannels Weights are being computed using SPW 0, channels 0~62 |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::summarizeStats The mean of the computed weights is 2.55491 |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::summarizeStats The variance of the computed weights is 1.29512 |
| 25-Nov-2025 10:00:41 | 2025-11-25 15:00:42 INFO StatWtTVI::summarizeStats Weights which had corresponding flags of True prior to running this application were not used to compute these stats. |
| 25-Nov-2025 10:00:42 | 2025-11-25 15:00:42 INFO name:: No table opened. |
| 25-Nov-2025 10:00:42 | 2025-11-25 15:00:42 INFO name:: No table opened. |
| 25-Nov-2025 10:00:42 | test_tool_ms_statwt.py::statwt_test::test_wtrange |
| 25-Nov-2025 10:00:42 | Test weight range |
| 25-Nov-2025 10:00:42 | PASSED |
| 25-Nov-2025 10:00:42 | |
| 25-Nov-2025 10:00:42 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_statwt/nose.xml - |
| 25-Nov-2025 10:00:42 | ======================== 19 passed, 1 warning in 20.11s ======================== |
| 25-Nov-2025 10:00:42 | ============================= test session starts ============================== |
| 25-Nov-2025 10:00:42 | platform linux -- Python 3.12.9, pytest-9.0.1, pluggy-1.6.0 -- /home/casatest/venv/bin/python3.12 |
| 25-Nov-2025 10:00:42 | cachedir: .pytest_cache |
| 25-Nov-2025 10:00:42 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater |
| 25-Nov-2025 10:00:42 | configfile: pytest.ini |
| 25-Nov-2025 10:00:42 | collecting ... collected 24 items |
| 25-Nov-2025 10:00:42 | |
| 25-Nov-2025 10:00:42 | |
| 25-Nov-2025 10:00:43 | 2025-11-25 15:00:43 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:00:43 | 2025-11-25 15:00:43 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:00:43 | 2025-11-25 15:00:43 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:00:43 | 2025-11-25 15:00:43 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:00:44 | 2025-11-25 15:00:45 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:00:44 | 2025-11-25 15:00:45 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:00:44 | 2025-11-25 15:00:45 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:00:44 | 2025-11-25 15:00:45 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 25-Nov-2025 10:00:44 | 2025-11-25 15:00:45 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 25-Nov-2025 10:00:45 | 2025-11-25 15:00:45 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:00:45 | 2025-11-25 15:00:45 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 25-Nov-2025 10:00:45 | 2025-11-25 15:00:45 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:00:45 | 2025-11-25 15:00:45 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:00:47 | 2025-11-25 15:00:47 INFO calibrater::corrupt Finished corrupting. |
| 25-Nov-2025 10:00:47 | 2025-11-25 15:00:47 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:00:47 | test_tool_calibrater.py::calibrater_test::test_activityRecord |
| 25-Nov-2025 10:00:47 | Check that using the calibrater to modify the vis shows in the activity record |
| 25-Nov-2025 10:00:47 | PASSED |
| 25-Nov-2025 10:00:47 | |
| 25-Nov-2025 10:00:47 | 2025-11-25 15:00:48 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:00:47 | 2025-11-25 15:00:48 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:00:47 | 2025-11-25 15:00:48 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:00:47 | 2025-11-25 15:00:48 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:00:48 | 2025-11-25 15:00:49 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:00:49 | 2025-11-25 15:00:49 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:00:49 | 2025-11-25 15:00:49 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:00:49 | 2025-11-25 15:00:49 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 25-Nov-2025 10:00:49 | 2025-11-25 15:00:49 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 25-Nov-2025 10:00:49 | 2025-11-25 15:00:49 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:00:49 | 2025-11-25 15:00:49 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 25-Nov-2025 10:00:49 | 2025-11-25 15:00:49 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:00:49 | 2025-11-25 15:00:49 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:00:51 | 2025-11-25 15:00:51 INFO calibrater::corrupt Finished corrupting. |
| 25-Nov-2025 10:00:53 | 2025-11-25 15:00:53 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:00:53 | test_tool_calibrater.py::calibrater_test::test_corruptCal |
| 25-Nov-2025 10:00:53 | Check that the MS is corrupted using the cal table |
| 25-Nov-2025 10:00:53 | PASSED |
| 25-Nov-2025 10:00:53 | |
| 25-Nov-2025 10:00:53 | 2025-11-25 15:00:54 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:00:53 | 2025-11-25 15:00:54 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:00:53 | 2025-11-25 15:00:54 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:00:53 | 2025-11-25 15:00:54 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:00:54 | 2025-11-25 15:00:55 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:00:55 | 2025-11-25 15:00:55 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:00:55 | 2025-11-25 15:00:55 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:00:55 | 2025-11-25 15:00:55 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:00:55 | test_tool_calibrater.py::calibrater_test::test_createEmpty |
| 25-Nov-2025 10:00:55 | Check that an empty cal table can be created |
| 25-Nov-2025 10:00:55 | PASSED |
| 25-Nov-2025 10:00:55 | |
| 25-Nov-2025 10:00:55 | 2025-11-25 15:00:56 INFO name:: No table opened. |
| 25-Nov-2025 10:00:55 | 2025-11-25 15:00:56 INFO showcache:: The Table Cache is empty. |
| 25-Nov-2025 10:00:55 | 2025-11-25 15:00:56 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:00:55 | 2025-11-25 15:00:56 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:00:55 | 2025-11-25 15:00:56 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:00:55 | 2025-11-25 15:00:56 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:00:56 | 2025-11-25 15:00:57 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO name:: No table opened. |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO showcache:: The Table Cache has the following 16 entries: |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:57 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:00:57 | test_tool_calibrater.py::calibrater_test::test_done |
| 25-Nov-2025 10:00:57 | Check that done closes the active calibrator tool |
| 25-Nov-2025 10:00:57 | PASSED |
| 25-Nov-2025 10:00:57 | |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:58 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:58 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:58 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:58 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:00:57 | 2025-11-25 15:00:58 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:00:58 | 2025-11-25 15:00:59 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:00:59 | 2025-11-25 15:00:59 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:00:59 | 2025-11-25 15:00:59 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:00:59 | 2025-11-25 15:00:59 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 25-Nov-2025 10:00:59 | 2025-11-25 15:00:59 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 25-Nov-2025 10:00:59 | 2025-11-25 15:00:59 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:00:59 | 2025-11-25 15:00:59 INFO calibrater::correct Beginning correct--------------------------- |
| 25-Nov-2025 10:00:59 | 2025-11-25 15:00:59 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:00:59 | 2025-11-25 15:00:59 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:02 | 2025-11-25 15:01:02 INFO calibrater::correct Finished correcting. |
| 25-Nov-2025 10:01:02 | 2025-11-25 15:01:03 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 25-Nov-2025 10:01:02 | 2025-11-25 15:01:03 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:01:02 | 2025-11-25 15:01:03 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:01:03 | 2025-11-25 15:01:03 INFO calibrater::initcalset Beginning initcalset------------------------ |
| 25-Nov-2025 10:01:03 | 2025-11-25 15:01:03 INFO VisSet::VisSet Initializing MODEL_DATA (to unity) and CORRECTED_DATA (to DATA) |
| 25-Nov-2025 10:01:03 | 2025-11-25 15:01:04 INFO VisSet::VisSet Initialized 328860 rows. |
| 25-Nov-2025 10:01:04 | 2025-11-25 15:01:05 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 25-Nov-2025 10:01:04 | test_tool_calibrater.py::calibrater_test::test_reinitModel |
| 25-Nov-2025 10:01:04 | Check that initcalset will reset the CORRECTED_DATA to unity |
| 25-Nov-2025 10:01:04 | PASSED |
| 25-Nov-2025 10:01:04 | |
| 25-Nov-2025 10:01:05 | 2025-11-25 15:01:05 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:01:05 | 2025-11-25 15:01:05 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:01:05 | 2025-11-25 15:01:05 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:01:05 | 2025-11-25 15:01:05 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:01:06 | 2025-11-25 15:01:07 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:01:06 | 2025-11-25 15:01:07 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:01:06 | 2025-11-25 15:01:07 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:01:06 | 2025-11-25 15:01:07 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 25-Nov-2025 10:01:06 | 2025-11-25 15:01:07 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:07 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:07 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:07 INFO Calibrater::setsolve Arranging to SOLVE: |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:07 INFO Calibrater::setsolve . Mf Mueller: table=gaincaltest2.ms.G0 append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:07 INFO calibrater::reset Reseting solve/apply state |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:07 INFO calibrater::solve Beginning solve----------------------------- |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:07 SEVERE Calibrater::solve Caught exception: Please run setsolve before attempting to solve. |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:07 INFO Calibrater::solve Reseting entire solve/apply state. |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:07 SEVERE Exception Reported: Error in Calibrater::solve. |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:07 INFO calibrater::correct Beginning correct--------------------------- |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:07 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:07 INFO Calibrater::correct2 (VI2/VB2) . (None) |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:07 SEVERE Calibrater::correct2 (VI2/VB2) Caught exception: Nothing to Apply |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:07 INFO Calibrater::correct2 (VI2/VB2) Resetting all calibration application settings. |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:07 SEVERE Exception Reported: Error in Calibrater::correct. |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:07 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:01:07 | test_tool_calibrater.py::calibrater_test::test_resetSolveApply |
| 25-Nov-2025 10:01:07 | Check that the reset function can clear set apply and solves |
| 25-Nov-2025 10:01:07 | PASSED |
| 25-Nov-2025 10:01:07 | |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:08 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:08 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:08 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:01:07 | 2025-11-25 15:01:08 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:01:09 | 2025-11-25 15:01:09 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:01:09 | 2025-11-25 15:01:09 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:01:09 | 2025-11-25 15:01:09 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:01:10 | 2025-11-25 15:01:10 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 25-Nov-2025 10:01:10 | 2025-11-25 15:01:10 INFO calibrater::reset Reseting solve/apply state |
| 25-Nov-2025 10:01:10 | 2025-11-25 15:01:10 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 25-Nov-2025 10:01:10 | 2025-11-25 15:01:10 INFO Calibrater::selectvis+ Selecting on spw: '1' |
| 25-Nov-2025 10:01:10 | 2025-11-25 15:01:10 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
| 25-Nov-2025 10:01:10 | 2025-11-25 15:01:10 INFO Calibrater::selectvis Frequency selection: |
| 25-Nov-2025 10:01:10 | 2025-11-25 15:01:10 INFO Calibrater::selectvis . Spw 1:0~7 (8 channels, step by 1) |
| 25-Nov-2025 10:01:10 | 2025-11-25 15:01:10 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 25-Nov-2025 10:01:10 | 2025-11-25 15:01:10 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:01:10 | test_tool_calibrater.py::calibrater_test::test_returnDict |
| 25-Nov-2025 10:01:10 | Check that the returndict function gives a dictonary with the expected keys |
| 25-Nov-2025 10:01:10 | PASSED |
| 25-Nov-2025 10:01:10 | |
| 25-Nov-2025 10:01:11 | 2025-11-25 15:01:11 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:01:11 | 2025-11-25 15:01:11 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:01:11 | 2025-11-25 15:01:11 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:01:11 | 2025-11-25 15:01:11 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:01:12 | 2025-11-25 15:01:12 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:01:12 | 2025-11-25 15:01:13 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:01:12 | 2025-11-25 15:01:13 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:01:12 | 2025-11-25 15:01:13 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 25-Nov-2025 10:01:12 | 2025-11-25 15:01:13 INFO calibrater::reset Reseting solve/apply state |
| 25-Nov-2025 10:01:12 | 2025-11-25 15:01:13 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 25-Nov-2025 10:01:12 | 2025-11-25 15:01:13 INFO Calibrater::selectvis+ Selecting on antenna/baseline: '0' |
| 25-Nov-2025 10:01:12 | 2025-11-25 15:01:13 INFO Calibrater::selectvis By selection 328860 rows are reduced to 65772 |
| 25-Nov-2025 10:01:12 | 2025-11-25 15:01:13 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 25-Nov-2025 10:01:12 | 2025-11-25 15:01:13 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 25-Nov-2025 10:01:12 | 2025-11-25 15:01:13 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 25-Nov-2025 10:01:12 | 2025-11-25 15:01:13 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 25-Nov-2025 10:01:12 | 2025-11-25 15:01:13 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:12 | 2025-11-25 15:01:13 INFO calibrater::correct Beginning correct--------------------------- |
| 25-Nov-2025 10:01:12 | 2025-11-25 15:01:13 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:01:12 | 2025-11-25 15:01:13 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:14 | 2025-11-25 15:01:14 INFO calibrater::correct Finished correcting. |
| 25-Nov-2025 10:01:14 | 2025-11-25 15:01:15 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:01:15 | test_tool_calibrater.py::calibrater_test::test_selectVisBaseline |
| 25-Nov-2025 10:01:15 | Check that selectvis properly selects baseline/antenna |
| 25-Nov-2025 10:01:15 | 65772 65772 |
| 25-Nov-2025 10:01:15 | 263088 263088 |
| 25-Nov-2025 10:01:15 | PASSED |
| 25-Nov-2025 10:01:15 | |
| 25-Nov-2025 10:01:15 | 2025-11-25 15:01:16 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:01:15 | 2025-11-25 15:01:16 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:01:15 | 2025-11-25 15:01:16 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:01:15 | 2025-11-25 15:01:16 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:01:17 | 2025-11-25 15:01:17 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:01:17 | 2025-11-25 15:01:17 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:01:17 | 2025-11-25 15:01:17 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:01:17 | 2025-11-25 15:01:17 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 25-Nov-2025 10:01:17 | 2025-11-25 15:01:17 INFO calibrater::reset Reseting solve/apply state |
| 25-Nov-2025 10:01:17 | 2025-11-25 15:01:17 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 25-Nov-2025 10:01:17 | 2025-11-25 15:01:17 INFO Calibrater::selectvis+ Selecting on field: '0' |
| 25-Nov-2025 10:01:17 | 2025-11-25 15:01:17 INFO Calibrater::selectvis By selection 328860 rows are reduced to 172260 |
| 25-Nov-2025 10:01:17 | 2025-11-25 15:01:17 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 25-Nov-2025 10:01:17 | 2025-11-25 15:01:17 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 25-Nov-2025 10:01:17 | 2025-11-25 15:01:17 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 25-Nov-2025 10:01:17 | 2025-11-25 15:01:17 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 25-Nov-2025 10:01:17 | 2025-11-25 15:01:17 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:17 | 2025-11-25 15:01:17 INFO calibrater::correct Beginning correct--------------------------- |
| 25-Nov-2025 10:01:17 | 2025-11-25 15:01:17 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:01:17 | 2025-11-25 15:01:17 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:18 | 2025-11-25 15:01:19 INFO calibrater::correct Finished correcting. |
| 25-Nov-2025 10:01:19 | 2025-11-25 15:01:20 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:01:19 | test_tool_calibrater.py::calibrater_test::test_selectVisField |
| 25-Nov-2025 10:01:19 | Check that the field is properly selected by selectvis |
| 25-Nov-2025 10:01:19 | PASSED |
| 25-Nov-2025 10:01:19 | |
| 25-Nov-2025 10:01:20 | 2025-11-25 15:01:20 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:01:20 | 2025-11-25 15:01:20 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:01:20 | 2025-11-25 15:01:21 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:01:20 | 2025-11-25 15:01:21 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:01:21 | 2025-11-25 15:01:22 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:01:22 | 2025-11-25 15:01:22 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:01:22 | 2025-11-25 15:01:22 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:01:22 | 2025-11-25 15:01:22 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 25-Nov-2025 10:01:22 | 2025-11-25 15:01:22 INFO calibrater::reset Reseting solve/apply state |
| 25-Nov-2025 10:01:22 | 2025-11-25 15:01:22 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 25-Nov-2025 10:01:22 | 2025-11-25 15:01:22 INFO Calibrater::selectvis+ Selecting on intent: '*AMPLI*' |
| 25-Nov-2025 10:01:22 | 2025-11-25 15:01:22 INFO Calibrater::selectvis Selection did not drop any rows |
| 25-Nov-2025 10:01:22 | 2025-11-25 15:01:22 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 25-Nov-2025 10:01:22 | 2025-11-25 15:01:22 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 25-Nov-2025 10:01:22 | 2025-11-25 15:01:22 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 25-Nov-2025 10:01:22 | 2025-11-25 15:01:22 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 25-Nov-2025 10:01:22 | 2025-11-25 15:01:22 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:22 | 2025-11-25 15:01:22 INFO calibrater::correct Beginning correct--------------------------- |
| 25-Nov-2025 10:01:22 | 2025-11-25 15:01:22 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:01:22 | 2025-11-25 15:01:22 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:25 | 2025-11-25 15:01:25 INFO calibrater::correct Finished correcting. |
| 25-Nov-2025 10:01:25 | 2025-11-25 15:01:25 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:01:25 | test_tool_calibrater.py::calibrater_test::test_selectVisIntent |
| 25-Nov-2025 10:01:25 | Check that the intent is properly selected by selectvis |
| 25-Nov-2025 10:01:25 | PASSED |
| 25-Nov-2025 10:01:25 | |
| 25-Nov-2025 10:01:26 | 2025-11-25 15:01:26 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:01:26 | 2025-11-25 15:01:26 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:01:26 | 2025-11-25 15:01:26 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:01:26 | 2025-11-25 15:01:26 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:01:27 | 2025-11-25 15:01:28 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:01:27 | 2025-11-25 15:01:28 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:01:27 | 2025-11-25 15:01:28 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:01:27 | 2025-11-25 15:01:28 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 25-Nov-2025 10:01:27 | 2025-11-25 15:01:28 INFO calibrater::reset Reseting solve/apply state |
| 25-Nov-2025 10:01:27 | 2025-11-25 15:01:28 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 25-Nov-2025 10:01:27 | 2025-11-25 15:01:28 INFO Calibrater::selectvis+ Selecting by observation IDs: '0' |
| 25-Nov-2025 10:01:27 | 2025-11-25 15:01:28 INFO Calibrater::selectvis By selection 328860 rows are reduced to 318870 |
| 25-Nov-2025 10:01:27 | 2025-11-25 15:01:28 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 25-Nov-2025 10:01:27 | 2025-11-25 15:01:28 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 25-Nov-2025 10:01:27 | 2025-11-25 15:01:28 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 25-Nov-2025 10:01:27 | 2025-11-25 15:01:28 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 25-Nov-2025 10:01:27 | 2025-11-25 15:01:28 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:27 | 2025-11-25 15:01:28 INFO calibrater::correct Beginning correct--------------------------- |
| 25-Nov-2025 10:01:27 | 2025-11-25 15:01:28 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:01:27 | 2025-11-25 15:01:28 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:31 | 2025-11-25 15:01:31 INFO calibrater::correct Finished correcting. |
| 25-Nov-2025 10:01:31 | 2025-11-25 15:01:31 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:01:31 | test_tool_calibrater.py::calibrater_test::test_selectVisObs |
| 25-Nov-2025 10:01:31 | PASSED |
| 25-Nov-2025 10:01:31 | |
| 25-Nov-2025 10:01:32 | 2025-11-25 15:01:32 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:01:32 | 2025-11-25 15:01:32 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:01:32 | 2025-11-25 15:01:32 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:01:32 | 2025-11-25 15:01:32 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:01:33 | 2025-11-25 15:01:34 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:01:33 | 2025-11-25 15:01:34 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:01:33 | 2025-11-25 15:01:34 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:01:33 | 2025-11-25 15:01:34 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 25-Nov-2025 10:01:33 | 2025-11-25 15:01:34 INFO calibrater::reset Reseting solve/apply state |
| 25-Nov-2025 10:01:33 | 2025-11-25 15:01:34 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 25-Nov-2025 10:01:33 | 2025-11-25 15:01:34 INFO Calibrater::selectvis+ Selecting on scan: '2' |
| 25-Nov-2025 10:01:33 | 2025-11-25 15:01:34 INFO Calibrater::selectvis By selection 328860 rows are reduced to 15660 |
| 25-Nov-2025 10:01:33 | 2025-11-25 15:01:34 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 25-Nov-2025 10:01:33 | 2025-11-25 15:01:34 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 25-Nov-2025 10:01:33 | 2025-11-25 15:01:34 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 25-Nov-2025 10:01:33 | 2025-11-25 15:01:34 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 25-Nov-2025 10:01:33 | 2025-11-25 15:01:34 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:33 | 2025-11-25 15:01:34 INFO calibrater::correct Beginning correct--------------------------- |
| 25-Nov-2025 10:01:33 | 2025-11-25 15:01:34 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:01:33 | 2025-11-25 15:01:34 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:34 | 2025-11-25 15:01:34 INFO calibrater::correct Finished correcting. |
| 25-Nov-2025 10:01:34 | 2025-11-25 15:01:35 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:01:34 | test_tool_calibrater.py::calibrater_test::test_selectVisScan |
| 25-Nov-2025 10:01:34 | Check tht the scan is properly selected by selectvis |
| 25-Nov-2025 10:01:34 | PASSED |
| 25-Nov-2025 10:01:34 | |
| 25-Nov-2025 10:01:35 | 2025-11-25 15:01:36 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:01:35 | 2025-11-25 15:01:36 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:01:35 | 2025-11-25 15:01:36 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:01:35 | 2025-11-25 15:01:36 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:01:36 | 2025-11-25 15:01:37 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:01:37 | 2025-11-25 15:01:37 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:01:37 | 2025-11-25 15:01:37 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:01:37 | 2025-11-25 15:01:37 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 25-Nov-2025 10:01:37 | 2025-11-25 15:01:37 INFO calibrater::reset Reseting solve/apply state |
| 25-Nov-2025 10:01:37 | 2025-11-25 15:01:37 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 25-Nov-2025 10:01:37 | 2025-11-25 15:01:37 INFO Calibrater::selectvis+ Selecting on spw: '0' |
| 25-Nov-2025 10:01:37 | 2025-11-25 15:01:37 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
| 25-Nov-2025 10:01:37 | 2025-11-25 15:01:37 INFO Calibrater::selectvis Frequency selection: |
| 25-Nov-2025 10:01:37 | 2025-11-25 15:01:37 INFO Calibrater::selectvis . Spw 0:0~7 (8 channels, step by 1) |
| 25-Nov-2025 10:01:37 | 2025-11-25 15:01:37 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 25-Nov-2025 10:01:37 | 2025-11-25 15:01:37 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 25-Nov-2025 10:01:37 | 2025-11-25 15:01:37 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 25-Nov-2025 10:01:37 | 2025-11-25 15:01:37 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:37 | 2025-11-25 15:01:37 INFO calibrater::correct Beginning correct--------------------------- |
| 25-Nov-2025 10:01:37 | 2025-11-25 15:01:37 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:01:37 | 2025-11-25 15:01:37 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:38 | 2025-11-25 15:01:38 INFO calibrater::correct Finished correcting. |
| 25-Nov-2025 10:01:38 | 2025-11-25 15:01:39 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:01:38 | test_tool_calibrater.py::calibrater_test::test_selectVisSpw |
| 25-Nov-2025 10:01:38 | Check that spw is properly selected by selectvis |
| 25-Nov-2025 10:01:38 | PASSED |
| 25-Nov-2025 10:01:38 | |
| 25-Nov-2025 10:01:39 | 2025-11-25 15:01:39 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:01:39 | 2025-11-25 15:01:39 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:01:39 | 2025-11-25 15:01:39 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:01:39 | 2025-11-25 15:01:40 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:01:40 | 2025-11-25 15:01:41 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:01:41 | 2025-11-25 15:01:41 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:01:41 | 2025-11-25 15:01:41 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:01:41 | 2025-11-25 15:01:41 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 25-Nov-2025 10:01:41 | 2025-11-25 15:01:41 INFO calibrater::reset Reseting solve/apply state |
| 25-Nov-2025 10:01:41 | 2025-11-25 15:01:41 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 25-Nov-2025 10:01:41 | 2025-11-25 15:01:41 INFO Calibrater::selectvis+ Selecting on time: '>04:38:23' |
| 25-Nov-2025 10:01:41 | 2025-11-25 15:01:41 INFO Calibrater::selectvis By selection 328860 rows are reduced to 313200 |
| 25-Nov-2025 10:01:41 | 2025-11-25 15:01:41 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 25-Nov-2025 10:01:41 | 2025-11-25 15:01:41 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 25-Nov-2025 10:01:41 | 2025-11-25 15:01:41 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 25-Nov-2025 10:01:41 | 2025-11-25 15:01:41 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 25-Nov-2025 10:01:41 | 2025-11-25 15:01:41 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:41 | 2025-11-25 15:01:41 INFO calibrater::correct Beginning correct--------------------------- |
| 25-Nov-2025 10:01:41 | 2025-11-25 15:01:41 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:01:41 | 2025-11-25 15:01:41 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:43 | 2025-11-25 15:01:44 INFO calibrater::correct Finished correcting. |
| 25-Nov-2025 10:01:44 | 2025-11-25 15:01:44 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:01:44 | test_tool_calibrater.py::calibrater_test::test_selectVisTime |
| 25-Nov-2025 10:01:44 | Check that time is properly selected by selectvis |
| 25-Nov-2025 10:01:44 | PASSED |
| 25-Nov-2025 10:01:44 | |
| 25-Nov-2025 10:01:44 | 2025-11-25 15:01:45 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:01:44 | 2025-11-25 15:01:45 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:01:44 | 2025-11-25 15:01:45 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:01:44 | 2025-11-25 15:01:45 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:01:45 | 2025-11-25 15:01:46 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:01:46 | 2025-11-25 15:01:46 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:01:46 | 2025-11-25 15:01:46 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:01:46 | 2025-11-25 15:01:46 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 25-Nov-2025 10:01:46 | 2025-11-25 15:01:46 INFO calibrater::reset Reseting solve/apply state |
| 25-Nov-2025 10:01:46 | 2025-11-25 15:01:46 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 25-Nov-2025 10:01:46 | 2025-11-25 15:01:46 INFO Calibrater::selectvis+ Selecting on uvrange: '> 500000lambda' |
| 25-Nov-2025 10:01:46 | 2025-11-25 15:01:47 INFO Calibrater::selectvis By selection 328860 rows are reduced to 103321 |
| 25-Nov-2025 10:01:46 | 2025-11-25 15:01:47 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 25-Nov-2025 10:01:46 | 2025-11-25 15:01:47 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 25-Nov-2025 10:01:46 | 2025-11-25 15:01:47 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 25-Nov-2025 10:01:46 | 2025-11-25 15:01:47 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 25-Nov-2025 10:01:46 | 2025-11-25 15:01:47 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:46 | 2025-11-25 15:01:47 INFO calibrater::correct Beginning correct--------------------------- |
| 25-Nov-2025 10:01:46 | 2025-11-25 15:01:47 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:01:46 | 2025-11-25 15:01:47 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:01:48 | 2025-11-25 15:01:49 INFO calibrater::correct Finished correcting. |
| 25-Nov-2025 10:01:49 | 2025-11-25 15:01:49 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:01:49 | test_tool_calibrater.py::calibrater_test::test_selectVisUVrange |
| 25-Nov-2025 10:01:49 | Check that selectvis properly selects for uvrange |
| 25-Nov-2025 10:01:49 | PASSED |
| 25-Nov-2025 10:01:49 | |
| 25-Nov-2025 10:01:49 | 2025-11-25 15:01:50 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:01:49 | 2025-11-25 15:01:50 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:01:49 | 2025-11-25 15:01:50 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:01:49 | 2025-11-25 15:01:50 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:01:50 | 2025-11-25 15:01:51 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:01:51 | 2025-11-25 15:01:51 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:01:51 | 2025-11-25 15:01:51 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:01:51 | 2025-11-25 15:01:51 INFO calibrater::parsecallibfile Beginning parsecallibfile-)------- |
| 25-Nov-2025 10:01:51 | 2025-11-25 15:01:51 INFO calibrater::setcallib Beginning setcallib--------- |
| 25-Nov-2025 10:01:51 | 2025-11-25 15:01:51 INFO Calibrater::setcallib2(callib) Arranging to APPLY: |
| 25-Nov-2025 10:01:51 | 2025-11-25 15:01:51 INFO . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 25-Nov-2025 10:01:51 | 2025-11-25 15:01:51 INFO . 0: |
| 25-Nov-2025 10:01:51 | 2025-11-25 15:01:51 INFO + MS: obs= scan= fld= intent= spw= |
| 25-Nov-2025 10:01:51 | 2025-11-25 15:01:51 INFO + CT: tinterp=linear finterp= |
| 25-Nov-2025 10:01:51 | 2025-11-25 15:01:51 INFO + obsmap=[] scanmap=[] fldmap=[] |
| 25-Nov-2025 10:01:51 | 2025-11-25 15:01:51 INFO + spwmap=[] antmap=[] |
| 25-Nov-2025 10:01:51 | 2025-11-25 15:01:51 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 25-Nov-2025 10:01:51 | 2025-11-25 15:01:51 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:01:51 | 2025-11-25 15:01:51 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 25-Nov-2025 10:01:53 | 2025-11-25 15:01:53 INFO calibrater::corrupt Finished corrupting. |
| 25-Nov-2025 10:01:53 | 2025-11-25 15:01:54 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:01:54 | test_tool_calibrater.py::calibrater_test::test_setCalLib |
| 25-Nov-2025 10:01:54 | Check that a provided cal table can be used to corrupt the MODEL_DATA |
| 25-Nov-2025 10:01:54 | PASSED |
| 25-Nov-2025 10:01:54 | |
| 25-Nov-2025 10:01:54 | 2025-11-25 15:01:54 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:01:54 | 2025-11-25 15:01:54 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:01:54 | 2025-11-25 15:01:54 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:01:54 | 2025-11-25 15:01:54 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:01:55 | 2025-11-25 15:01:55 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:01:55 | 2025-11-25 15:01:56 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:01:55 | 2025-11-25 15:01:56 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:01:55 | 2025-11-25 15:01:56 INFO Calibrater::setCorrDepFlags Setting correlation dependent flags = True |
| 25-Nov-2025 10:01:55 | 2025-11-25 15:01:56 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:01:55 | test_tool_calibrater.py::calibrater_test::test_setCorrDepFlags |
| 25-Nov-2025 10:01:55 | Check that corrdepflags will be checked |
| 25-Nov-2025 10:01:55 | PASSED |
| 25-Nov-2025 10:01:55 | |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:56 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:56 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:56 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:56 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:56 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:56 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:56 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:56 INFO calibrater::smooth Beginning smooth--(MSSelection version)------- |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:56 INFO Calibrater::smooth Beginning smoothing/interpolating method. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:56 WARN Found pre-v4.1 caltable (/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ngc5921.gcal); attempting to update... |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:56 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:56 INFO Calibrater::smooth Storing result in testcalout.cal |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:56 INFO Writing solutions to table: testcalout.cal |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:56 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:01:56 | test_tool_calibrater.py::calibrater_test::test_smoothedCalTables |
| 25-Nov-2025 10:01:56 | Check that the smooth command creates a smoothed cal table |
| 25-Nov-2025 10:01:56 | PASSED |
| 25-Nov-2025 10:01:56 | |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO calibrater::setsolvebandpoly Beginning setsolvebandpoly--(MSSelection version)------- |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO Calibrater::setsolvebandpoly Arranging to SOLVE: |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO Calibrater::setsolvebandpoly . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO calibrater::solve Beginning solve----------------------------- |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO Calibrater::solve . (None) |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO Calibrater::solve . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO Calibrater::solve Solving for BPOLY |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO For solint = inf, found 7 solution intervals. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.059507/0.0681762/0.0765806 |
| 25-Nov-2025 10:01:56 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.336529/0.750193/1.6779 |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0630839/0.0689061/0.0756384 |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.279482/0.74979/1.59355 |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:57 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:57 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0672607/0.089081/0.111106 |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.31075/3.32219/4.29305 |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0652822/0.0889198/0.116912 |
| 25-Nov-2025 10:01:57 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 25-Nov-2025 10:01:58 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.44269/3.26616/4.3519 |
| 25-Nov-2025 10:01:58 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 25-Nov-2025 10:01:58 | 2025-11-25 15:01:58 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 25-Nov-2025 10:01:58 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 25-Nov-2025 10:01:58 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 25-Nov-2025 10:01:58 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 25-Nov-2025 10:01:58 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 25-Nov-2025 10:01:58 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 25-Nov-2025 10:01:58 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 25-Nov-2025 10:01:58 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 25-Nov-2025 10:01:58 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 25-Nov-2025 10:01:58 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 25-Nov-2025 10:01:58 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350681/0.587724/0.894558 |
| 25-Nov-2025 10:01:58 | 2025-11-25 15:01:58 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 25-Nov-2025 10:02:00 | 2025-11-25 15:02:00 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.296/59.0077/111.454 |
| 25-Nov-2025 10:02:00 | 2025-11-25 15:02:00 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 25-Nov-2025 10:02:00 | 2025-11-25 15:02:00 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.354236/0.581733/0.988903 |
| 25-Nov-2025 10:02:00 | 2025-11-25 15:02:00 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 17.2419/56.3249/117.264 |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0850169/0.113968/0.15276 |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.67561/5.33243/8.17296 |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0784236/0.114345/0.159908 |
| 25-Nov-2025 10:02:02 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.46392/5.27232/7.20673 |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:03 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0703936/0.102501/0.131676 |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:03 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.98728/4.47977/5.84264 |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0751114/0.102994/0.138529 |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.18629/4.47068/5.8941 |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350626/0.604424/0.974388 |
| 25-Nov-2025 10:02:03 | 2025-11-25 15:02:04 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 25-Nov-2025 10:02:06 | 2025-11-25 15:02:06 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.2542/59.3511/120.719 |
| 25-Nov-2025 10:02:06 | 2025-11-25 15:02:06 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 25-Nov-2025 10:02:06 | 2025-11-25 15:02:06 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.382806/0.598119/0.941571 |
| 25-Nov-2025 10:02:06 | 2025-11-25 15:02:06 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:08 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 20.0637/57.2112/118.101 |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:08 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:08 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:08 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:08 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:08 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:08 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:08 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:08 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:08 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:08 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:08 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:08 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0750931/0.0978998/0.125897 |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:08 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:09 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.72932/3.98787/5.33715 |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:09 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:09 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0658572/0.0972125/0.140794 |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:09 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:09 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.97943/3.97841/5.72903 |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:09 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:09 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:09 INFO Calibrater::solve Found good BPOLY solutions in 7 slots. |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:09 INFO calibrater::solve Finished solving. |
| 25-Nov-2025 10:02:08 | 2025-11-25 15:02:09 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 25-Nov-2025 10:02:09 | test_tool_calibrater.py::calibrater_test::test_solveBandpass |
| 25-Nov-2025 10:02:09 | Check that solve band poly creates the output table |
| 25-Nov-2025 10:02:09 | PASSED |
| 25-Nov-2025 10:02:09 | |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO calibrater::setsolvegainspline Beginning setsolvegainspline--(MSSelection version)------- |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO Calibrater::setsolvegainspline Arranging to SOLVE: |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO Calibrater::setsolvegainspline . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO calibrater::solve Beginning solve----------------------------- |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO Calibrater::solve . (None) |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO Calibrater::solve . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO GJonesSpline::solve() Fitting time-dependent cubic splines. |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO GJonesSpline::solve() Solving for phase splines with splinetime= 10800 |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO GJonesSpline::solve() Solving for amplitude splines with splinetime= 10800 |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO GJonesSpline::solve() Accumulating data for: field= 1331+30500002_0, spw= 0, nchan= 63 |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:09 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63 |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:10 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63 |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:10 INFO GJonesSpline::solve() Number of timestamps in data = 60 |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:10 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec. |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:10 INFO GJonesSpline::solve() Number of cubic spline control points = 4 |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:10 INFO GJonesSpline::solve() Number of cubic spline knots = 8 |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:10 INFO GJonesSpline::solve() Number of cubic spline segments = 1 |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:10 INFO GJonesSpline::solve() Fitting amplitude spline. |
| 25-Nov-2025 10:02:09 | test_tool_calibrater.py::calibrater_test::test_solveGainspline DPBTRF ;problem leading minor 23 |
| 25-Nov-2025 10:02:09 | DPBTRF ;problem leading minor 23 |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:10 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline. |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:10 INFO GJonesSpline::solve() Fitting phase spline. |
| 25-Nov-2025 10:02:09 | DPBTRF ;problem leading minor 22 |
| 25-Nov-2025 10:02:09 | DPBTRF ;problem leading minor 22 |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:10 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:10 INFO calibrater::solve Finished solving. |
| 25-Nov-2025 10:02:09 | 2025-11-25 15:02:10 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 25-Nov-2025 10:02:09 | |
| 25-Nov-2025 10:02:09 | Check that solve gain spline creates the output table |
| 25-Nov-2025 10:02:09 | PASSED |
| 25-Nov-2025 10:02:09 | |
| 25-Nov-2025 10:02:10 | 2025-11-25 15:02:10 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:02:10 | 2025-11-25 15:02:10 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:02:10 | 2025-11-25 15:02:10 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:02:10 | 2025-11-25 15:02:10 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:02:11 | 2025-11-25 15:02:11 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:02:11 | 2025-11-25 15:02:12 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:02:11 | 2025-11-25 15:02:12 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:02:11 | 2025-11-25 15:02:12 INFO calibrater::specifycal Beginning specifycal----------------------- |
| 25-Nov-2025 10:02:11 | 2025-11-25 15:02:12 INFO Creating G Jones table from specified parameters. |
| 25-Nov-2025 10:02:11 | 2025-11-25 15:02:12 INFO Generating 'G' corrections. |
| 25-Nov-2025 10:02:11 | 2025-11-25 15:02:12 INFO Specified parameter(s) (per spw and pol) repeated on all antennas. |
| 25-Nov-2025 10:02:11 | 2025-11-25 15:02:12 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations. |
| 25-Nov-2025 10:02:11 | 2025-11-25 15:02:12 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9]) |
| 25-Nov-2025 10:02:11 | 2025-11-25 15:02:12 INFO Writing solutions to table: testcalout.cal |
| 25-Nov-2025 10:02:11 | 2025-11-25 15:02:12 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:02:11 | test_tool_calibrater.py::calibrater_test::test_specifyCal |
| 25-Nov-2025 10:02:11 | Check that specifycal can set values for specific spws and antennas |
| 25-Nov-2025 10:02:11 | PASSED |
| 25-Nov-2025 10:02:11 | |
| 25-Nov-2025 10:02:12 | 2025-11-25 15:02:12 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 25-Nov-2025 10:02:12 | 2025-11-25 15:02:12 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 25-Nov-2025 10:02:12 | 2025-11-25 15:02:12 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:02:12 | 2025-11-25 15:02:12 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:02:12 | 2025-11-25 15:02:12 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:13 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO Calibrater::setsolve Arranging to SOLVE: |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO Calibrater::state The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO Calibrater::state The following calibration term is arranged for solve: |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO calibrater::solve Beginning solve----------------------------- |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 25-Nov-2025 10:02:13 | 2025-11-25 15:02:14 INFO Solving for Mf Mueller |
| 25-Nov-2025 10:02:14 | 2025-11-25 15:02:14 INFO For solint = inf, found 84 solution intervals. |
| 25-Nov-2025 10:02:15 | 2025-11-25 15:02:15 INFO Found good Mf Mueller solutions in 84 intervals. |
| 25-Nov-2025 10:02:15 | 2025-11-25 15:02:15 INFO Writing solutions to table: output.ms |
| 25-Nov-2025 10:02:15 | 2025-11-25 15:02:16 INFO calibrater::solve Finished solving. |
| 25-Nov-2025 10:02:15 | 2025-11-25 15:02:16 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 25-Nov-2025 10:02:15 | test_tool_calibrater.py::calibrater_test::test_standardPath |
| 25-Nov-2025 10:02:15 | open setapply setsolve state solve close |
| 25-Nov-2025 10:02:15 | PASSED |
| 25-Nov-2025 10:02:15 | |
| 25-Nov-2025 10:02:15 | 2025-11-25 15:02:16 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:02:15 | 2025-11-25 15:02:16 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:02:15 | 2025-11-25 15:02:16 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:02:15 | 2025-11-25 15:02:16 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO name:: No table opened. |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: The Table Cache has the following 16 entries: |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO name:: No table opened. |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 INFO showcache:: The Table Cache is empty. |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:17 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:02:17 | test_tool_calibrater.py::calibrater_test::test_takesMs |
| 25-Nov-2025 10:02:17 | Check that the calibrater tool can open and close an MS |
| 25-Nov-2025 10:02:17 | PASSED |
| 25-Nov-2025 10:02:17 | |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:18 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:18 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:18 INFO Clearing all model records in MS header. |
| 25-Nov-2025 10:02:17 | 2025-11-25 15:02:18 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 25-Nov-2025 10:02:18 | 2025-11-25 15:02:19 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 25-Nov-2025 10:02:19 | 2025-11-25 15:02:19 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 25-Nov-2025 10:02:19 | 2025-11-25 15:02:19 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 25-Nov-2025 10:02:19 | 2025-11-25 15:02:19 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 25-Nov-2025 10:02:19 | 2025-11-25 15:02:19 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 25-Nov-2025 10:02:19 | 2025-11-25 15:02:19 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:02:19 | 2025-11-25 15:02:19 INFO calibrater::correct Beginning correct--------------------------- |
| 25-Nov-2025 10:02:19 | 2025-11-25 15:02:19 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 25-Nov-2025 10:02:19 | 2025-11-25 15:02:19 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 25-Nov-2025 10:02:21 | 2025-11-25 15:02:22 INFO calibrater::correct Finished correcting. |
| 25-Nov-2025 10:02:21 | 2025-11-25 15:02:22 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 25-Nov-2025 10:02:22 | test_tool_calibrater.py::calibrater_test::test_writeToCorrected |
| 25-Nov-2025 10:02:22 | Check that the tool writes to the CORRECTED_DATA column |
| 25-Nov-2025 10:02:22 | PASSED |
| 25-Nov-2025 10:02:22 | |
| 25-Nov-2025 10:02:22 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml - |
| 25-Nov-2025 10:02:22 | =================== 24 passed, 1 warning in 99.66s (0:01:39) =================== |
| 25-Nov-2025 10:02:22 | ============================= test session starts ============================== |
| 25-Nov-2025 10:02:22 | platform linux -- Python 3.12.9, pytest-9.0.1, pluggy-1.6.0 -- /home/casatest/venv/bin/python3.12 |
| 25-Nov-2025 10:02:22 | cachedir: .pytest_cache |
| 25-Nov-2025 10:02:22 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist |
| 25-Nov-2025 10:02:22 | configfile: pytest.ini |
| 25-Nov-2025 10:02:22 | collecting ... collected 4 items |
| 25-Nov-2025 10:02:22 | |
| 25-Nov-2025 10:02:22 | |
| 25-Nov-2025 10:02:22 | test_tool_componentlist.py::componentlist_test::test_getfluxerror |
| 25-Nov-2025 10:02:22 | Test cl.getfluxerror() |
| 25-Nov-2025 10:02:22 | PASSED |
| 25-Nov-2025 10:02:22 | |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 WARN componentlist::close componentlist closed |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 WARN componentlist::close componentlist closed |
| 25-Nov-2025 10:02:22 | test_tool_componentlist.py::componentlist_test::test_plp |
| 25-Nov-2025 10:02:22 | Test adding/updating plp spectral component |
| 25-Nov-2025 10:02:22 | PASSED |
| 25-Nov-2025 10:02:22 | |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 INFO componentlist::summarize SUMMARY OF COMPONENT |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 INFO componentlist::summarize+ Shape: Gaussian |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 INFO componentlist::summarize+ Flux density: [(1,0), (0,0), (0,0), (0,0)] Jy +/- [(0,0), (0,0), (0,0), (0,0)] |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 INFO componentlist::summarize+ Spectral model: Constant |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 INFO componentlist::summarize+ Position: Position --- |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 INFO componentlist::summarize+ --- long: 10:30:00.000 (fixed) |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 INFO componentlist::summarize+ --- lat: - 20.00.00.00 (fixed) |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 INFO componentlist::summarize+ |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 INFO componentlist::summarize+ Size: |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 INFO componentlist::summarize+ --- major axis FWHM: 4.00 arcsec (fixed) |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 INFO componentlist::summarize+ --- minor axis FWHM: 2.00 arcsec (fixed) |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 INFO componentlist::summarize+ --- position angle: 30.0deg (fixed) |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 SEVERE componentlist::summarize Exception Reported: List has only 1 components, but zero-based component 1 specified. Please specify a component less than 1 |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 SEVERE componentlist::putkeyword Exception Reported: Exception: A table is not attached to this ComponentList. |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 SEVERE componentlist::putkeyword+ ... thrown by void casa::ComponentList::putKeyword(const casacore::String&, const casac::variant&) at File: /source/casa6/casatools/src/code/components/ComponentModels/ComponentList.cc, line: 1238 |
| 25-Nov-2025 10:02:22 | test_tool_componentlist.py::componentlist_test::test_summarize |
| 25-Nov-2025 10:02:22 | Test the cl.summarize() method |
| 25-Nov-2025 10:02:22 | PASSED |
| 25-Nov-2025 10:02:22 | |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 SEVERE componentlist::getkeyword Exception Reported: Exception: A table is not attached to this ComponentList. |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 SEVERE componentlist::getkeyword+ ... thrown by casac::variant* casa::ComponentList::getKeyword(const casacore::String&) const at File: /source/casa6/casatools/src/code/components/ComponentModels/ComponentList.cc, line: 1248 |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 SEVERE componentlist::haskeyword Exception Reported: Exception: A table is not attached to this ComponentList. |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 SEVERE componentlist::haskeyword+ ... thrown by bool casa::ComponentList::hasKeyword(const casacore::String&) const at File: /source/casa6/casatools/src/code/components/ComponentModels/ComponentList.cc, line: 1233 |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 SEVERE componentlist::putkeyword Exception Reported: Exception: A table is not attached to this ComponentList. |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 SEVERE componentlist::putkeyword+ ... thrown by void casa::ComponentList::putKeyword(const casacore::String&, const casac::variant&) at File: /source/casa6/casatools/src/code/components/ComponentModels/ComponentList.cc, line: 1238 |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 SEVERE componentlist::getkeyword Exception Reported: Exception: A table is not attached to this ComponentList. |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 SEVERE componentlist::getkeyword+ ... thrown by casac::variant* casa::ComponentList::getKeyword(const casacore::String&) const at File: /source/casa6/casatools/src/code/components/ComponentModels/ComponentList.cc, line: 1248 |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 SEVERE componentlist::haskeyword Exception Reported: Exception: A table is not attached to this ComponentList. |
| 25-Nov-2025 10:02:22 | 2025-11-25 15:02:23 SEVERE componentlist::haskeyword+ ... thrown by bool casa::ComponentList::hasKeyword(const casacore::String&) const at File: /source/casa6/casatools/src/code/components/ComponentModels/ComponentList.cc, line: 1233 |
| 25-Nov-2025 10:02:22 | test_tool_componentlist.py::componentlist_test::test_table_keyword_interface |
| 25-Nov-2025 10:02:22 | Test putting, getting, querying table keywords |
| 25-Nov-2025 10:02:22 | PASSED |
| 25-Nov-2025 10:02:22 | |
| 25-Nov-2025 10:02:22 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_componentlist/nose.xml - |
| 25-Nov-2025 10:02:22 | ========================= 4 passed, 1 warning in 0.52s ========================= |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_simulator/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/ |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pbcor/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_measures/ |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_measures |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_measures/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_measures/ |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_regionmanager/ |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_regionmanager |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_regionmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_regionmanager/ |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms/ |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_sdm_toms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms/ |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_deviation/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils/ |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_synthesisutils/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils/ |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pv/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_rebin/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_fitprofile/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_createmultims/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_logsink/ |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_logsink |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_logsink/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_logsink/ |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics/ |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_statistics/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics/ |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calanalysis/ |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calanalysis |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calanalysis/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calanalysis/ |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_sdm/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_statwt/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 25-Nov-2025 10:02:23 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist |
| 25-Nov-2025 10:02:23 | |
| 25-Nov-2025 10:02:23 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_componentlist/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 25-Nov-2025 10:02:23 | total 77004 |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci 15001 136875 Nov 25 14:48 casatestutils-6.7.3.8+dirty-py3-none-any.whl |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci 15001 78544168 Nov 25 14:48 casatools-6.7.3.8+dirty-cp312-cp312-manylinux_2_28_x86_64.whl |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 4340 Nov 25 15:02 test_tool_agentflagger.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 1006 Nov 25 15:02 test_tool_calanalysis.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 2657 Nov 25 15:02 test_tool_calibrater.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 687 Nov 25 15:02 test_tool_componentlist.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 7467 Nov 25 15:02 test_tool_coordsys.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 12935 Nov 25 15:02 test_tool_image.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 2220 Nov 25 15:02 test_tool_image_collapse.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 1048 Nov 25 15:02 test_tool_image_deviation.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 2575 Nov 25 15:02 test_tool_image_fitprofile.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 1178 Nov 25 15:02 test_tool_image_pbcor.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 883 Nov 25 15:02 test_tool_image_pv.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 1006 Nov 25 15:02 test_tool_image_rebin.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 1336 Nov 25 15:02 test_tool_image_regrid.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 1533 Nov 25 15:02 test_tool_image_statistics.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 765 Nov 25 15:02 test_tool_image_subimage.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 890 Nov 25 15:02 test_tool_image_transpose.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 1966 Nov 25 15:02 test_tool_imagepol.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 839 Nov 25 15:02 test_tool_linearmosaic.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 669 Nov 25 15:02 test_tool_logsink.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 549 Nov 25 15:02 test_tool_measures.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 5224 Nov 25 15:02 test_tool_ms.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 367 Nov 25 15:02 test_tool_ms_createmultims.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 2095 Nov 25 15:02 test_tool_ms_statwt.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 8633 Nov 25 15:02 test_tool_msmetadata.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 359 Nov 25 15:02 test_tool_msuvbinner.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 1171 Nov 25 15:02 test_tool_quanta.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 3977 Nov 25 15:02 test_tool_regionmanager.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 2072 Nov 25 15:02 test_tool_sdm.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 2096 Nov 25 15:02 test_tool_sdm_toms.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 670 Nov 25 15:02 test_tool_simulator.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 1716 Nov 25 15:02 test_tool_synthesisutils.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 1462 Nov 25 15:02 test_tool_table.xml |
| 25-Nov-2025 10:02:23 | -rw-r--r-- 1 casaci root 1717 Nov 25 15:02 test_tool_vpmanager.xml |
| 25-Nov-2025 10:02:23 | Finished task 'Test wheel' with result: Success |
| 25-Nov-2025 10:02:23 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
| 25-Nov-2025 10:02:23 | Parsing test results under /export/home/cbt-el7-6/bamboohome/xml-data/build-dir/CASASPECS-CI-TTOML228... |
| 25-Nov-2025 10:02:23 | Finished task 'Parse tests' with result: Success |
| 25-Nov-2025 10:02:23 | Starting task 'Cleanup' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
| 25-Nov-2025 10:02:23 | Beginning to execute external process for build 'CASASPECS - CI Build - Test Tools Many Linux 2.28 #259 (CASASPECS-CI-TTOML228-259)' ... running command line: /export/home/cbt-el7-6/bamboohome/temp/CASASPECS-CI-TTOML228-259-ScriptBuildTask-8758731062671232296.sh ... in: /export/home/cbt-el7-6/bamboohome/xml-data/build-dir/CASASPECS-CI-TTOML228 |
| 25-Nov-2025 10:02:23 | Starting cleanup |
| 25-Nov-2025 10:02:35 | wheel-container-test |
| 25-Nov-2025 10:02:36 | wheel-container-test |
| 25-Nov-2025 10:02:36 | Cleanup complete |
| 25-Nov-2025 10:02:36 | Finished task 'Cleanup' with result: Success |
| 25-Nov-2025 10:02:36 | Running post build plugin 'Docker Container Cleanup' |
| 25-Nov-2025 10:02:36 | Beginning to execute external process for build 'CASASPECS - CI Build - Test Tools Many Linux 2.28 #259 (CASASPECS-CI-TTOML228-259)' ... running command line: /usr/bin/docker rm -f wheel-container-test ... in: /export/home/cbt-el7-6/bamboohome/xml-data/build-dir/CASASPECS-CI-TTOML228 |
| 25-Nov-2025 10:02:36 | Error response from daemon: No such container: wheel-container-test |
| 25-Nov-2025 10:02:36 | Running post build plugin 'NCover Results Collector' |
| 25-Nov-2025 10:02:36 | Running post build plugin 'Build Results Label Collector' |
| 25-Nov-2025 10:02:36 | Running post build plugin 'Clover Results Collector' |
| 25-Nov-2025 10:02:36 | Running post build plugin 'npm Cache Cleanup' |
| 25-Nov-2025 10:02:36 | Running post build plugin 'Artifact Copier' |
| 25-Nov-2025 10:02:36 | Publishing an artifact: Tests |
| 25-Nov-2025 10:02:36 | Finished publishing of artifact Non required job artifact Http Compression On : [Tests], patterns: [*.xml] anchored at: [wheeldirectory/] in 316.9 ms |
| 25-Nov-2025 10:02:36 | Publishing an artifact: xml Directories |
| 25-Nov-2025 10:02:36 | Finished publishing of artifact Non required job artifact Http Compression On : [xml Directories], patterns: [**/*.xml] anchored at: [wheeldirectory/] in 190.6 ms |
| 25-Nov-2025 10:02:36 | Finalising the build... |
| 25-Nov-2025 10:02:36 | Stopping timer. |
| 25-Nov-2025 10:02:36 | Build CASASPECS-CI-TTOML228-259 completed. |
| 25-Nov-2025 10:02:37 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
| 25-Nov-2025 10:02:37 | Running on server: post build plugin 'NCover Results Collector' |
| 25-Nov-2025 10:02:37 | Running on server: post build plugin 'Build Labeller' |
| 25-Nov-2025 10:02:37 | Running on server: post build plugin 'Clover Delta Calculator' |
| 25-Nov-2025 10:02:37 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
| 25-Nov-2025 10:02:37 | All post build plugins have finished |
| 25-Nov-2025 10:02:37 | Generating build results summary... |
| 25-Nov-2025 10:02:37 | Saving build results to disk... |
| 25-Nov-2025 10:02:37 | Store variable context... |
| 25-Nov-2025 10:02:37 | Finished building CASASPECS-CI-TTOML228-259. |