Build: #251 was successful
Job: Test Tools Many Linux 2.28 was successful
Build log
The build generated 53,638 lines of output. The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
| 04-Nov-2025 17:52:10 | 2025-11-04 22:52:10 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 04-Nov-2025 17:52:10 | 2025-11-04 22:52:10 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 04-Nov-2025 17:52:10 | 2025-11-04 22:52:10 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 04-Nov-2025 17:52:10 | 2025-11-04 22:52:10 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 04-Nov-2025 17:52:10 | 2025-11-04 22:52:11 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:52:10 | 2025-11-04 22:52:11 INFO calibrater::correct Beginning correct--------------------------- |
| 04-Nov-2025 17:52:10 | 2025-11-04 22:52:11 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 04-Nov-2025 17:52:10 | 2025-11-04 22:52:11 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:52:12 | 2025-11-04 22:52:12 INFO calibrater::correct Finished correcting. |
| 04-Nov-2025 17:52:13 | 2025-11-04 22:52:14 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 04-Nov-2025 17:52:13 | test_tool_calibrater.py::calibrater_test::test_selectVisBaseline |
| 04-Nov-2025 17:52:13 | Check that selectvis properly selects baseline/antenna |
| 04-Nov-2025 17:52:13 | 65772 65772 |
| 04-Nov-2025 17:52:13 | 263088 263088 |
| 04-Nov-2025 17:52:13 | PASSED |
| 04-Nov-2025 17:52:13 | |
| 04-Nov-2025 17:52:15 | 2025-11-04 22:52:15 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 04-Nov-2025 17:52:15 | 2025-11-04 22:52:15 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 04-Nov-2025 17:52:15 | 2025-11-04 22:52:15 INFO Clearing all model records in MS header. |
| 04-Nov-2025 17:52:15 | 2025-11-04 22:52:16 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Nov-2025 17:52:17 | 2025-11-04 22:52:17 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Nov-2025 17:52:17 | 2025-11-04 22:52:18 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 04-Nov-2025 17:52:17 | 2025-11-04 22:52:18 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Nov-2025 17:52:17 | 2025-11-04 22:52:18 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 04-Nov-2025 17:52:17 | 2025-11-04 22:52:18 INFO calibrater::reset Reseting solve/apply state |
| 04-Nov-2025 17:52:17 | 2025-11-04 22:52:18 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 04-Nov-2025 17:52:17 | 2025-11-04 22:52:18 INFO Calibrater::selectvis+ Selecting on field: '0' |
| 04-Nov-2025 17:52:17 | 2025-11-04 22:52:18 INFO Calibrater::selectvis By selection 328860 rows are reduced to 172260 |
| 04-Nov-2025 17:52:17 | 2025-11-04 22:52:18 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 04-Nov-2025 17:52:17 | 2025-11-04 22:52:18 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 04-Nov-2025 17:52:17 | 2025-11-04 22:52:18 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 04-Nov-2025 17:52:17 | 2025-11-04 22:52:18 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 04-Nov-2025 17:52:18 | 2025-11-04 22:52:18 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:52:18 | 2025-11-04 22:52:18 INFO calibrater::correct Beginning correct--------------------------- |
| 04-Nov-2025 17:52:18 | 2025-11-04 22:52:18 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 04-Nov-2025 17:52:18 | 2025-11-04 22:52:18 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:52:19 | 2025-11-04 22:52:20 INFO calibrater::correct Finished correcting. |
| 04-Nov-2025 17:52:20 | 2025-11-04 22:52:21 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 04-Nov-2025 17:52:20 | test_tool_calibrater.py::calibrater_test::test_selectVisField |
| 04-Nov-2025 17:52:20 | Check that the field is properly selected by selectvis |
| 04-Nov-2025 17:52:20 | PASSED |
| 04-Nov-2025 17:52:20 | |
| 04-Nov-2025 17:52:22 | 2025-11-04 22:52:23 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 04-Nov-2025 17:52:22 | 2025-11-04 22:52:23 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 04-Nov-2025 17:52:22 | 2025-11-04 22:52:23 INFO Clearing all model records in MS header. |
| 04-Nov-2025 17:52:22 | 2025-11-04 22:52:23 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Nov-2025 17:52:24 | 2025-11-04 22:52:24 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Nov-2025 17:52:24 | 2025-11-04 22:52:25 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 04-Nov-2025 17:52:24 | 2025-11-04 22:52:25 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Nov-2025 17:52:24 | 2025-11-04 22:52:25 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 04-Nov-2025 17:52:24 | 2025-11-04 22:52:25 INFO calibrater::reset Reseting solve/apply state |
| 04-Nov-2025 17:52:24 | 2025-11-04 22:52:25 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 04-Nov-2025 17:52:24 | 2025-11-04 22:52:25 INFO Calibrater::selectvis+ Selecting on intent: '*AMPLI*' |
| 04-Nov-2025 17:52:24 | 2025-11-04 22:52:25 INFO Calibrater::selectvis Selection did not drop any rows |
| 04-Nov-2025 17:52:24 | 2025-11-04 22:52:25 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 04-Nov-2025 17:52:24 | 2025-11-04 22:52:25 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 04-Nov-2025 17:52:24 | 2025-11-04 22:52:25 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 04-Nov-2025 17:52:24 | 2025-11-04 22:52:25 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 04-Nov-2025 17:52:24 | 2025-11-04 22:52:25 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:52:24 | 2025-11-04 22:52:25 INFO calibrater::correct Beginning correct--------------------------- |
| 04-Nov-2025 17:52:24 | 2025-11-04 22:52:25 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 04-Nov-2025 17:52:24 | 2025-11-04 22:52:25 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:52:27 | 2025-11-04 22:52:27 INFO calibrater::correct Finished correcting. |
| 04-Nov-2025 17:52:27 | 2025-11-04 22:52:28 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 04-Nov-2025 17:52:27 | test_tool_calibrater.py::calibrater_test::test_selectVisIntent |
| 04-Nov-2025 17:52:27 | Check that the intent is properly selected by selectvis |
| 04-Nov-2025 17:52:27 | PASSED |
| 04-Nov-2025 17:52:27 | |
| 04-Nov-2025 17:52:29 | 2025-11-04 22:52:30 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 04-Nov-2025 17:52:29 | 2025-11-04 22:52:30 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 04-Nov-2025 17:52:29 | 2025-11-04 22:52:30 INFO Clearing all model records in MS header. |
| 04-Nov-2025 17:52:30 | 2025-11-04 22:52:30 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Nov-2025 17:52:31 | 2025-11-04 22:52:32 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Nov-2025 17:52:31 | 2025-11-04 22:52:32 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 04-Nov-2025 17:52:31 | 2025-11-04 22:52:32 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Nov-2025 17:52:31 | 2025-11-04 22:52:32 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 04-Nov-2025 17:52:31 | 2025-11-04 22:52:32 INFO calibrater::reset Reseting solve/apply state |
| 04-Nov-2025 17:52:31 | 2025-11-04 22:52:32 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 04-Nov-2025 17:52:31 | 2025-11-04 22:52:32 INFO Calibrater::selectvis+ Selecting by observation IDs: '0' |
| 04-Nov-2025 17:52:32 | 2025-11-04 22:52:32 INFO Calibrater::selectvis By selection 328860 rows are reduced to 318870 |
| 04-Nov-2025 17:52:32 | 2025-11-04 22:52:32 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 04-Nov-2025 17:52:32 | 2025-11-04 22:52:32 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 04-Nov-2025 17:52:32 | 2025-11-04 22:52:32 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 04-Nov-2025 17:52:32 | 2025-11-04 22:52:32 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 04-Nov-2025 17:52:32 | 2025-11-04 22:52:32 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:52:32 | 2025-11-04 22:52:32 INFO calibrater::correct Beginning correct--------------------------- |
| 04-Nov-2025 17:52:32 | 2025-11-04 22:52:32 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 04-Nov-2025 17:52:32 | 2025-11-04 22:52:32 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:52:34 | 2025-11-04 22:52:35 INFO calibrater::correct Finished correcting. |
| 04-Nov-2025 17:52:35 | 2025-11-04 22:52:35 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 04-Nov-2025 17:52:35 | test_tool_calibrater.py::calibrater_test::test_selectVisObs |
| 04-Nov-2025 17:52:35 | PASSED |
| 04-Nov-2025 17:52:35 | |
| 04-Nov-2025 17:52:36 | 2025-11-04 22:52:36 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 04-Nov-2025 17:52:36 | 2025-11-04 22:52:36 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 04-Nov-2025 17:52:36 | 2025-11-04 22:52:36 INFO Clearing all model records in MS header. |
| 04-Nov-2025 17:52:36 | 2025-11-04 22:52:37 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Nov-2025 17:52:38 | 2025-11-04 22:52:38 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Nov-2025 17:52:38 | 2025-11-04 22:52:39 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 04-Nov-2025 17:52:38 | 2025-11-04 22:52:39 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Nov-2025 17:52:38 | 2025-11-04 22:52:39 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 04-Nov-2025 17:52:38 | 2025-11-04 22:52:39 INFO calibrater::reset Reseting solve/apply state |
| 04-Nov-2025 17:52:38 | 2025-11-04 22:52:39 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 04-Nov-2025 17:52:38 | 2025-11-04 22:52:39 INFO Calibrater::selectvis+ Selecting on scan: '2' |
| 04-Nov-2025 17:52:39 | 2025-11-04 22:52:39 INFO Calibrater::selectvis By selection 328860 rows are reduced to 15660 |
| 04-Nov-2025 17:52:39 | 2025-11-04 22:52:39 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 04-Nov-2025 17:52:39 | 2025-11-04 22:52:39 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 04-Nov-2025 17:52:39 | 2025-11-04 22:52:39 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 04-Nov-2025 17:52:39 | 2025-11-04 22:52:39 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 04-Nov-2025 17:52:39 | 2025-11-04 22:52:39 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:52:39 | 2025-11-04 22:52:39 INFO calibrater::correct Beginning correct--------------------------- |
| 04-Nov-2025 17:52:39 | 2025-11-04 22:52:39 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 04-Nov-2025 17:52:39 | 2025-11-04 22:52:39 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:52:39 | 2025-11-04 22:52:39 INFO calibrater::correct Finished correcting. |
| 04-Nov-2025 17:52:40 | 2025-11-04 22:52:40 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 04-Nov-2025 17:52:40 | test_tool_calibrater.py::calibrater_test::test_selectVisScan |
| 04-Nov-2025 17:52:40 | Check tht the scan is properly selected by selectvis |
| 04-Nov-2025 17:52:40 | PASSED |
| 04-Nov-2025 17:52:40 | |
| 04-Nov-2025 17:52:41 | 2025-11-04 22:52:42 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 04-Nov-2025 17:52:41 | 2025-11-04 22:52:42 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 04-Nov-2025 17:52:41 | 2025-11-04 22:52:42 INFO Clearing all model records in MS header. |
| 04-Nov-2025 17:52:41 | 2025-11-04 22:52:42 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Nov-2025 17:52:43 | 2025-11-04 22:52:43 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Nov-2025 17:52:43 | 2025-11-04 22:52:44 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 04-Nov-2025 17:52:43 | 2025-11-04 22:52:44 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Nov-2025 17:52:43 | 2025-11-04 22:52:44 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 04-Nov-2025 17:52:43 | 2025-11-04 22:52:44 INFO calibrater::reset Reseting solve/apply state |
| 04-Nov-2025 17:52:43 | 2025-11-04 22:52:44 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 04-Nov-2025 17:52:43 | 2025-11-04 22:52:44 INFO Calibrater::selectvis+ Selecting on spw: '0' |
| 04-Nov-2025 17:52:43 | 2025-11-04 22:52:44 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
| 04-Nov-2025 17:52:44 | 2025-11-04 22:52:44 INFO Calibrater::selectvis Frequency selection: |
| 04-Nov-2025 17:52:44 | 2025-11-04 22:52:44 INFO Calibrater::selectvis . Spw 0:0~7 (8 channels, step by 1) |
| 04-Nov-2025 17:52:44 | 2025-11-04 22:52:44 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 04-Nov-2025 17:52:44 | 2025-11-04 22:52:44 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 04-Nov-2025 17:52:44 | 2025-11-04 22:52:44 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 04-Nov-2025 17:52:44 | 2025-11-04 22:52:44 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:52:44 | 2025-11-04 22:52:44 INFO calibrater::correct Beginning correct--------------------------- |
| 04-Nov-2025 17:52:44 | 2025-11-04 22:52:44 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 04-Nov-2025 17:52:44 | 2025-11-04 22:52:44 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:52:44 | 2025-11-04 22:52:45 INFO calibrater::correct Finished correcting. |
| 04-Nov-2025 17:52:46 | 2025-11-04 22:52:46 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 04-Nov-2025 17:52:46 | test_tool_calibrater.py::calibrater_test::test_selectVisSpw |
| 04-Nov-2025 17:52:46 | Check that spw is properly selected by selectvis |
| 04-Nov-2025 17:52:46 | PASSED |
| 04-Nov-2025 17:52:46 | |
| 04-Nov-2025 17:52:47 | 2025-11-04 22:52:47 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 04-Nov-2025 17:52:47 | 2025-11-04 22:52:47 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 04-Nov-2025 17:52:47 | 2025-11-04 22:52:47 INFO Clearing all model records in MS header. |
| 04-Nov-2025 17:52:47 | 2025-11-04 22:52:48 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Nov-2025 17:52:49 | 2025-11-04 22:52:50 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Nov-2025 17:52:49 | 2025-11-04 22:52:50 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 04-Nov-2025 17:52:49 | 2025-11-04 22:52:50 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Nov-2025 17:52:49 | 2025-11-04 22:52:50 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 04-Nov-2025 17:52:49 | 2025-11-04 22:52:50 INFO calibrater::reset Reseting solve/apply state |
| 04-Nov-2025 17:52:49 | 2025-11-04 22:52:50 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 04-Nov-2025 17:52:49 | 2025-11-04 22:52:50 INFO Calibrater::selectvis+ Selecting on time: '>04:38:23' |
| 04-Nov-2025 17:52:50 | 2025-11-04 22:52:50 INFO Calibrater::selectvis By selection 328860 rows are reduced to 313200 |
| 04-Nov-2025 17:52:50 | 2025-11-04 22:52:50 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 04-Nov-2025 17:52:50 | 2025-11-04 22:52:50 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 04-Nov-2025 17:52:50 | 2025-11-04 22:52:50 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 04-Nov-2025 17:52:50 | 2025-11-04 22:52:50 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 04-Nov-2025 17:52:50 | 2025-11-04 22:52:50 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:52:50 | 2025-11-04 22:52:50 INFO calibrater::correct Beginning correct--------------------------- |
| 04-Nov-2025 17:52:50 | 2025-11-04 22:52:50 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 04-Nov-2025 17:52:50 | 2025-11-04 22:52:50 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:52:52 | 2025-11-04 22:52:53 INFO calibrater::correct Finished correcting. |
| 04-Nov-2025 17:52:53 | 2025-11-04 22:52:54 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 04-Nov-2025 17:52:53 | test_tool_calibrater.py::calibrater_test::test_selectVisTime |
| 04-Nov-2025 17:52:53 | Check that time is properly selected by selectvis |
| 04-Nov-2025 17:52:53 | PASSED |
| 04-Nov-2025 17:52:53 | |
| 04-Nov-2025 17:52:54 | 2025-11-04 22:52:54 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 04-Nov-2025 17:52:54 | 2025-11-04 22:52:54 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 04-Nov-2025 17:52:54 | 2025-11-04 22:52:54 INFO Clearing all model records in MS header. |
| 04-Nov-2025 17:52:54 | 2025-11-04 22:52:55 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Nov-2025 17:52:56 | 2025-11-04 22:52:56 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Nov-2025 17:52:56 | 2025-11-04 22:52:57 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 04-Nov-2025 17:52:56 | 2025-11-04 22:52:57 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Nov-2025 17:52:56 | 2025-11-04 22:52:57 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 04-Nov-2025 17:52:56 | 2025-11-04 22:52:57 INFO calibrater::reset Reseting solve/apply state |
| 04-Nov-2025 17:52:56 | 2025-11-04 22:52:57 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 04-Nov-2025 17:52:56 | 2025-11-04 22:52:57 INFO Calibrater::selectvis+ Selecting on uvrange: '> 500000lambda' |
| 04-Nov-2025 17:52:57 | 2025-11-04 22:52:57 INFO Calibrater::selectvis By selection 328860 rows are reduced to 103321 |
| 04-Nov-2025 17:52:57 | 2025-11-04 22:52:57 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 04-Nov-2025 17:52:57 | 2025-11-04 22:52:57 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 04-Nov-2025 17:52:57 | 2025-11-04 22:52:57 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 04-Nov-2025 17:52:57 | 2025-11-04 22:52:57 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 04-Nov-2025 17:52:57 | 2025-11-04 22:52:57 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:52:57 | 2025-11-04 22:52:57 INFO calibrater::correct Beginning correct--------------------------- |
| 04-Nov-2025 17:52:57 | 2025-11-04 22:52:57 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 04-Nov-2025 17:52:57 | 2025-11-04 22:52:57 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:52:58 | 2025-11-04 22:52:59 INFO calibrater::correct Finished correcting. |
| 04-Nov-2025 17:52:59 | 2025-11-04 22:53:00 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 04-Nov-2025 17:53:00 | test_tool_calibrater.py::calibrater_test::test_selectVisUVrange |
| 04-Nov-2025 17:53:00 | Check that selectvis properly selects for uvrange |
| 04-Nov-2025 17:53:00 | PASSED |
| 04-Nov-2025 17:53:00 | |
| 04-Nov-2025 17:53:00 | 2025-11-04 22:53:00 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 04-Nov-2025 17:53:00 | 2025-11-04 22:53:00 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 04-Nov-2025 17:53:00 | 2025-11-04 22:53:00 INFO Clearing all model records in MS header. |
| 04-Nov-2025 17:53:00 | 2025-11-04 22:53:01 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Nov-2025 17:53:03 | 2025-11-04 22:53:03 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Nov-2025 17:53:03 | 2025-11-04 22:53:04 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 04-Nov-2025 17:53:03 | 2025-11-04 22:53:04 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Nov-2025 17:53:03 | 2025-11-04 22:53:04 INFO calibrater::parsecallibfile Beginning parsecallibfile-)------- |
| 04-Nov-2025 17:53:03 | 2025-11-04 22:53:04 INFO calibrater::setcallib Beginning setcallib--------- |
| 04-Nov-2025 17:53:03 | 2025-11-04 22:53:04 INFO Calibrater::setcallib2(callib) Arranging to APPLY: |
| 04-Nov-2025 17:53:03 | 2025-11-04 22:53:04 INFO . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 04-Nov-2025 17:53:03 | 2025-11-04 22:53:04 INFO . 0: |
| 04-Nov-2025 17:53:03 | 2025-11-04 22:53:04 INFO + MS: obs= scan= fld= intent= spw= |
| 04-Nov-2025 17:53:03 | 2025-11-04 22:53:04 INFO + CT: tinterp=linear finterp= |
| 04-Nov-2025 17:53:03 | 2025-11-04 22:53:04 INFO + obsmap=[] scanmap=[] fldmap=[] |
| 04-Nov-2025 17:53:03 | 2025-11-04 22:53:04 INFO + spwmap=[] antmap=[] |
| 04-Nov-2025 17:53:03 | 2025-11-04 22:53:04 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 04-Nov-2025 17:53:03 | 2025-11-04 22:53:04 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 04-Nov-2025 17:53:03 | 2025-11-04 22:53:04 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 04-Nov-2025 17:53:06 | 2025-11-04 22:53:06 INFO calibrater::corrupt Finished corrupting. |
| 04-Nov-2025 17:53:07 | 2025-11-04 22:53:07 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 04-Nov-2025 17:53:07 | test_tool_calibrater.py::calibrater_test::test_setCalLib |
| 04-Nov-2025 17:53:07 | Check that a provided cal table can be used to corrupt the MODEL_DATA |
| 04-Nov-2025 17:53:07 | PASSED |
| 04-Nov-2025 17:53:07 | |
| 04-Nov-2025 17:53:07 | 2025-11-04 22:53:07 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 04-Nov-2025 17:53:07 | 2025-11-04 22:53:07 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 04-Nov-2025 17:53:07 | 2025-11-04 22:53:07 INFO Clearing all model records in MS header. |
| 04-Nov-2025 17:53:07 | 2025-11-04 22:53:08 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Nov-2025 17:53:09 | 2025-11-04 22:53:09 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Nov-2025 17:53:09 | 2025-11-04 22:53:10 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 04-Nov-2025 17:53:09 | 2025-11-04 22:53:10 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Nov-2025 17:53:09 | 2025-11-04 22:53:10 INFO Calibrater::setCorrDepFlags Setting correlation dependent flags = True |
| 04-Nov-2025 17:53:09 | 2025-11-04 22:53:10 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 04-Nov-2025 17:53:10 | test_tool_calibrater.py::calibrater_test::test_setCorrDepFlags |
| 04-Nov-2025 17:53:10 | Check that corrdepflags will be checked |
| 04-Nov-2025 17:53:10 | PASSED |
| 04-Nov-2025 17:53:10 | |
| 04-Nov-2025 17:53:10 | 2025-11-04 22:53:10 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 04-Nov-2025 17:53:10 | 2025-11-04 22:53:10 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 04-Nov-2025 17:53:10 | 2025-11-04 22:53:10 INFO Clearing all model records in MS header. |
| 04-Nov-2025 17:53:10 | 2025-11-04 22:53:11 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Nov-2025 17:53:11 | 2025-11-04 22:53:11 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Nov-2025 17:53:11 | 2025-11-04 22:53:11 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 04-Nov-2025 17:53:11 | 2025-11-04 22:53:11 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Nov-2025 17:53:11 | 2025-11-04 22:53:11 INFO calibrater::smooth Beginning smooth--(MSSelection version)------- |
| 04-Nov-2025 17:53:11 | 2025-11-04 22:53:11 INFO Calibrater::smooth Beginning smoothing/interpolating method. |
| 04-Nov-2025 17:53:11 | 2025-11-04 22:53:12 WARN Found pre-v4.1 caltable (/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ngc5921.gcal); attempting to update... |
| 04-Nov-2025 17:53:11 | 2025-11-04 22:53:12 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
| 04-Nov-2025 17:53:12 | 2025-11-04 22:53:12 INFO Calibrater::smooth Storing result in testcalout.cal |
| 04-Nov-2025 17:53:12 | 2025-11-04 22:53:12 INFO Writing solutions to table: testcalout.cal |
| 04-Nov-2025 17:53:15 | 2025-11-04 22:53:15 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 04-Nov-2025 17:53:15 | test_tool_calibrater.py::calibrater_test::test_smoothedCalTables |
| 04-Nov-2025 17:53:15 | Check that the smooth command creates a smoothed cal table |
| 04-Nov-2025 17:53:15 | PASSED |
| 04-Nov-2025 17:53:15 | |
| 04-Nov-2025 17:53:15 | 2025-11-04 22:53:16 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 04-Nov-2025 17:53:15 | 2025-11-04 22:53:16 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 04-Nov-2025 17:53:15 | 2025-11-04 22:53:16 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 04-Nov-2025 17:53:15 | 2025-11-04 22:53:16 INFO Clearing all model records in MS header. |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:16 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO calibrater::setsolvebandpoly Beginning setsolvebandpoly--(MSSelection version)------- |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO Calibrater::setsolvebandpoly Arranging to SOLVE: |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO Calibrater::setsolvebandpoly . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO calibrater::solve Beginning solve----------------------------- |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO Calibrater::solve . (None) |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO Calibrater::solve . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO Calibrater::solve Solving for BPOLY |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO For solint = inf, found 7 solution intervals. |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.059507/0.0681762/0.0765806 |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 04-Nov-2025 17:53:16 | 2025-11-04 22:53:17 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.336529/0.750193/1.6779 |
| 04-Nov-2025 17:53:17 | 2025-11-04 22:53:17 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 04-Nov-2025 17:53:17 | 2025-11-04 22:53:17 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0630839/0.0689061/0.0756384 |
| 04-Nov-2025 17:53:17 | 2025-11-04 22:53:17 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 04-Nov-2025 17:53:17 | 2025-11-04 22:53:17 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.279482/0.74979/1.59355 |
| 04-Nov-2025 17:53:17 | 2025-11-04 22:53:17 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 04-Nov-2025 17:53:19 | 2025-11-04 22:53:19 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 04-Nov-2025 17:53:20 | 2025-11-04 22:53:21 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 04-Nov-2025 17:53:20 | 2025-11-04 22:53:21 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 04-Nov-2025 17:53:20 | 2025-11-04 22:53:21 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 04-Nov-2025 17:53:20 | 2025-11-04 22:53:21 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 04-Nov-2025 17:53:20 | 2025-11-04 22:53:21 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 04-Nov-2025 17:53:20 | 2025-11-04 22:53:21 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 04-Nov-2025 17:53:20 | 2025-11-04 22:53:21 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 04-Nov-2025 17:53:20 | 2025-11-04 22:53:21 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 04-Nov-2025 17:53:20 | 2025-11-04 22:53:21 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 04-Nov-2025 17:53:20 | 2025-11-04 22:53:21 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0672607/0.089081/0.111106 |
| 04-Nov-2025 17:53:20 | 2025-11-04 22:53:21 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 04-Nov-2025 17:53:20 | 2025-11-04 22:53:21 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.31075/3.32219/4.29305 |
| 04-Nov-2025 17:53:20 | 2025-11-04 22:53:21 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 04-Nov-2025 17:53:20 | 2025-11-04 22:53:21 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0652822/0.0889198/0.116912 |
| 04-Nov-2025 17:53:20 | 2025-11-04 22:53:21 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 04-Nov-2025 17:53:21 | 2025-11-04 22:53:21 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.44269/3.26616/4.3519 |
| 04-Nov-2025 17:53:21 | 2025-11-04 22:53:21 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 04-Nov-2025 17:53:21 | 2025-11-04 22:53:21 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 04-Nov-2025 17:53:21 | 2025-11-04 22:53:22 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 04-Nov-2025 17:53:21 | 2025-11-04 22:53:22 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 04-Nov-2025 17:53:21 | 2025-11-04 22:53:22 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 04-Nov-2025 17:53:21 | 2025-11-04 22:53:22 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 04-Nov-2025 17:53:21 | 2025-11-04 22:53:22 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 04-Nov-2025 17:53:21 | 2025-11-04 22:53:22 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 04-Nov-2025 17:53:21 | 2025-11-04 22:53:22 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 04-Nov-2025 17:53:21 | 2025-11-04 22:53:22 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 04-Nov-2025 17:53:21 | 2025-11-04 22:53:22 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 04-Nov-2025 17:53:21 | 2025-11-04 22:53:22 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350681/0.587724/0.894558 |
| 04-Nov-2025 17:53:21 | 2025-11-04 22:53:22 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 04-Nov-2025 17:53:24 | 2025-11-04 22:53:24 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.296/59.0077/111.454 |
| 04-Nov-2025 17:53:24 | 2025-11-04 22:53:24 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 04-Nov-2025 17:53:24 | 2025-11-04 22:53:24 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.354236/0.581733/0.988903 |
| 04-Nov-2025 17:53:24 | 2025-11-04 22:53:24 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 04-Nov-2025 17:53:26 | 2025-11-04 22:53:26 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 17.2419/56.3249/117.264 |
| 04-Nov-2025 17:53:26 | 2025-11-04 22:53:26 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 04-Nov-2025 17:53:26 | 2025-11-04 22:53:26 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:36 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:36 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:36 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:36 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:36 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:36 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:36 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:36 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:36 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:36 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0850169/0.113968/0.15276 |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:36 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:36 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.67561/5.33243/8.17296 |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:36 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:36 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0784236/0.114345/0.159908 |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:36 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:37 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.46392/5.27232/7.20673 |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:37 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:37 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:37 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:37 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:37 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:37 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:37 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:37 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:37 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:37 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:37 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:37 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0703936/0.102501/0.131676 |
| 04-Nov-2025 17:53:36 | 2025-11-04 22:53:37 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:37 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.98728/4.47977/5.84264 |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:37 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:37 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0751114/0.102994/0.138529 |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:37 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:38 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.18629/4.47068/5.8941 |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:38 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:38 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:38 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:38 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:38 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:38 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:38 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:38 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:38 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:38 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:38 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:38 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350626/0.604424/0.974388 |
| 04-Nov-2025 17:53:37 | 2025-11-04 22:53:38 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 04-Nov-2025 17:53:40 | 2025-11-04 22:53:40 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.2542/59.3511/120.719 |
| 04-Nov-2025 17:53:40 | 2025-11-04 22:53:40 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 04-Nov-2025 17:53:40 | 2025-11-04 22:53:40 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.382806/0.598119/0.941571 |
| 04-Nov-2025 17:53:40 | 2025-11-04 22:53:40 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 04-Nov-2025 17:53:42 | 2025-11-04 22:53:42 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 20.0637/57.2112/118.101 |
| 04-Nov-2025 17:53:42 | 2025-11-04 22:53:42 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 04-Nov-2025 17:53:42 | 2025-11-04 22:53:42 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 04-Nov-2025 17:53:42 | 2025-11-04 22:53:43 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 04-Nov-2025 17:53:42 | 2025-11-04 22:53:43 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 04-Nov-2025 17:53:42 | 2025-11-04 22:53:43 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 04-Nov-2025 17:53:42 | 2025-11-04 22:53:43 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 04-Nov-2025 17:53:42 | 2025-11-04 22:53:43 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 04-Nov-2025 17:53:42 | 2025-11-04 22:53:43 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 04-Nov-2025 17:53:42 | 2025-11-04 22:53:43 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 04-Nov-2025 17:53:42 | 2025-11-04 22:53:43 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 04-Nov-2025 17:53:42 | 2025-11-04 22:53:43 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 04-Nov-2025 17:53:42 | 2025-11-04 22:53:43 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0750931/0.0978998/0.125897 |
| 04-Nov-2025 17:53:42 | 2025-11-04 22:53:43 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 04-Nov-2025 17:53:43 | 2025-11-04 22:53:43 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.72932/3.98787/5.33715 |
| 04-Nov-2025 17:53:43 | 2025-11-04 22:53:43 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 04-Nov-2025 17:53:43 | 2025-11-04 22:53:43 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0658572/0.0972125/0.140794 |
| 04-Nov-2025 17:53:43 | 2025-11-04 22:53:43 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 04-Nov-2025 17:53:43 | 2025-11-04 22:53:44 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.97943/3.97841/5.72903 |
| 04-Nov-2025 17:53:43 | 2025-11-04 22:53:44 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 04-Nov-2025 17:53:43 | 2025-11-04 22:53:44 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 04-Nov-2025 17:53:43 | 2025-11-04 22:53:44 INFO Calibrater::solve Found good BPOLY solutions in 7 slots. |
| 04-Nov-2025 17:53:43 | 2025-11-04 22:53:44 INFO calibrater::solve Finished solving. |
| 04-Nov-2025 17:53:44 | 2025-11-04 22:53:44 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 04-Nov-2025 17:53:44 | test_tool_calibrater.py::calibrater_test::test_solveBandpass |
| 04-Nov-2025 17:53:44 | Check that solve band poly creates the output table |
| 04-Nov-2025 17:53:44 | PASSED |
| 04-Nov-2025 17:53:44 | |
| 04-Nov-2025 17:53:44 | 2025-11-04 22:53:44 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 04-Nov-2025 17:53:44 | 2025-11-04 22:53:44 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 04-Nov-2025 17:53:44 | 2025-11-04 22:53:44 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 04-Nov-2025 17:53:44 | 2025-11-04 22:53:44 INFO Clearing all model records in MS header. |
| 04-Nov-2025 17:53:44 | 2025-11-04 22:53:45 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO calibrater::setsolvegainspline Beginning setsolvegainspline--(MSSelection version)------- |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO Calibrater::setsolvegainspline Arranging to SOLVE: |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO Calibrater::setsolvegainspline . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO calibrater::solve Beginning solve----------------------------- |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO Calibrater::solve . (None) |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO Calibrater::solve . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO GJonesSpline::solve() Fitting time-dependent cubic splines. |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO GJonesSpline::solve() Solving for phase splines with splinetime= 10800 |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO GJonesSpline::solve() Solving for amplitude splines with splinetime= 10800 |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO GJonesSpline::solve() Accumulating data for: field= 1331+30500002_0, spw= 0, nchan= 63 |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63 |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63 |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO GJonesSpline::solve() Number of timestamps in data = 60 |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec. |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO GJonesSpline::solve() Number of cubic spline control points = 4 |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO GJonesSpline::solve() Number of cubic spline knots = 8 |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO GJonesSpline::solve() Number of cubic spline segments = 1 |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO GJonesSpline::solve() Fitting amplitude spline. |
| 04-Nov-2025 17:53:45 | test_tool_calibrater.py::calibrater_test::test_solveGainspline DPBTRF ;problem leading minor 23 |
| 04-Nov-2025 17:53:45 | DPBTRF ;problem leading minor 23 |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline. |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO GJonesSpline::solve() Fitting phase spline. |
| 04-Nov-2025 17:53:45 | DPBTRF ;problem leading minor 22 |
| 04-Nov-2025 17:53:45 | DPBTRF ;problem leading minor 22 |
| 04-Nov-2025 17:53:45 | 2025-11-04 22:53:45 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline |
| 04-Nov-2025 17:53:46 | 2025-11-04 22:53:47 INFO calibrater::solve Finished solving. |
| 04-Nov-2025 17:53:46 | 2025-11-04 22:53:47 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 04-Nov-2025 17:53:46 | |
| 04-Nov-2025 17:53:46 | Check that solve gain spline creates the output table |
| 04-Nov-2025 17:53:46 | PASSED |
| 04-Nov-2025 17:53:46 | |
| 04-Nov-2025 17:53:47 | 2025-11-04 22:53:47 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 04-Nov-2025 17:53:47 | 2025-11-04 22:53:47 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 04-Nov-2025 17:53:47 | 2025-11-04 22:53:47 INFO Clearing all model records in MS header. |
| 04-Nov-2025 17:53:47 | 2025-11-04 22:53:48 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Nov-2025 17:53:49 | 2025-11-04 22:53:49 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Nov-2025 17:53:49 | 2025-11-04 22:53:50 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 04-Nov-2025 17:53:49 | 2025-11-04 22:53:50 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Nov-2025 17:53:49 | 2025-11-04 22:53:50 INFO calibrater::specifycal Beginning specifycal----------------------- |
| 04-Nov-2025 17:53:49 | 2025-11-04 22:53:50 INFO Creating G Jones table from specified parameters. |
| 04-Nov-2025 17:53:49 | 2025-11-04 22:53:50 INFO Generating 'G' corrections. |
| 04-Nov-2025 17:53:49 | 2025-11-04 22:53:50 INFO Specified parameter(s) (per spw and pol) repeated on all antennas. |
| 04-Nov-2025 17:53:49 | 2025-11-04 22:53:50 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations. |
| 04-Nov-2025 17:53:49 | 2025-11-04 22:53:50 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9]) |
| 04-Nov-2025 17:53:49 | 2025-11-04 22:53:50 INFO Writing solutions to table: testcalout.cal |
| 04-Nov-2025 17:53:51 | 2025-11-04 22:53:51 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 04-Nov-2025 17:53:51 | test_tool_calibrater.py::calibrater_test::test_specifyCal |
| 04-Nov-2025 17:53:51 | Check that specifycal can set values for specific spws and antennas |
| 04-Nov-2025 17:53:51 | PASSED |
| 04-Nov-2025 17:53:51 | |
| 04-Nov-2025 17:53:51 | 2025-11-04 22:53:52 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 04-Nov-2025 17:53:51 | 2025-11-04 22:53:52 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 04-Nov-2025 17:53:51 | 2025-11-04 22:53:52 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 04-Nov-2025 17:53:51 | 2025-11-04 22:53:52 INFO Clearing all model records in MS header. |
| 04-Nov-2025 17:53:52 | 2025-11-04 22:53:52 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Nov-2025 17:53:53 | 2025-11-04 22:53:53 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Nov-2025 17:53:53 | 2025-11-04 22:53:54 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 04-Nov-2025 17:53:53 | 2025-11-04 22:53:54 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Nov-2025 17:53:53 | 2025-11-04 22:53:54 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 04-Nov-2025 17:53:53 | 2025-11-04 22:53:54 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 04-Nov-2025 17:53:54 | 2025-11-04 22:53:54 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:53:54 | 2025-11-04 22:53:54 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 04-Nov-2025 17:53:54 | 2025-11-04 22:53:54 INFO Calibrater::setsolve Arranging to SOLVE: |
| 04-Nov-2025 17:53:54 | 2025-11-04 22:53:54 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 04-Nov-2025 17:53:54 | 2025-11-04 22:53:54 INFO Calibrater::state The following calibration terms are arranged for apply: |
| 04-Nov-2025 17:53:54 | 2025-11-04 22:53:54 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:53:54 | 2025-11-04 22:53:54 INFO Calibrater::state The following calibration term is arranged for solve: |
| 04-Nov-2025 17:53:54 | 2025-11-04 22:53:54 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 04-Nov-2025 17:53:54 | 2025-11-04 22:53:54 INFO calibrater::solve Beginning solve----------------------------- |
| 04-Nov-2025 17:53:54 | 2025-11-04 22:53:54 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 04-Nov-2025 17:53:54 | 2025-11-04 22:53:54 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:53:54 | 2025-11-04 22:53:54 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 04-Nov-2025 17:53:54 | 2025-11-04 22:53:54 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 04-Nov-2025 17:53:54 | 2025-11-04 22:53:54 INFO Solving for Mf Mueller |
| 04-Nov-2025 17:53:54 | 2025-11-04 22:53:54 INFO For solint = inf, found 84 solution intervals. |
| 04-Nov-2025 17:53:55 | 2025-11-04 22:53:56 INFO Found good Mf Mueller solutions in 84 intervals. |
| 04-Nov-2025 17:53:55 | 2025-11-04 22:53:56 INFO Writing solutions to table: output.ms |
| 04-Nov-2025 17:53:57 | 2025-11-04 22:53:58 INFO calibrater::solve Finished solving. |
| 04-Nov-2025 17:53:58 | 2025-11-04 22:53:58 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 04-Nov-2025 17:53:58 | test_tool_calibrater.py::calibrater_test::test_standardPath |
| 04-Nov-2025 17:53:58 | open setapply setsolve state solve close |
| 04-Nov-2025 17:53:58 | PASSED |
| 04-Nov-2025 17:53:58 | |
| 04-Nov-2025 17:53:58 | 2025-11-04 22:53:59 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 04-Nov-2025 17:53:58 | 2025-11-04 22:53:59 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 04-Nov-2025 17:53:58 | 2025-11-04 22:53:59 INFO Clearing all model records in MS header. |
| 04-Nov-2025 17:53:58 | 2025-11-04 22:53:59 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO name:: No table opened. |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: The Table Cache has the following 16 entries: |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO name:: No table opened. |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 INFO showcache:: The Table Cache is empty. |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:00 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 04-Nov-2025 17:54:00 | test_tool_calibrater.py::calibrater_test::test_takesMs |
| 04-Nov-2025 17:54:00 | Check that the calibrater tool can open and close an MS |
| 04-Nov-2025 17:54:00 | PASSED |
| 04-Nov-2025 17:54:00 | |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:01 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:01 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:01 INFO Clearing all model records in MS header. |
| 04-Nov-2025 17:54:00 | 2025-11-04 22:54:01 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Nov-2025 17:54:02 | 2025-11-04 22:54:02 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Nov-2025 17:54:02 | 2025-11-04 22:54:03 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 04-Nov-2025 17:54:02 | 2025-11-04 22:54:03 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Nov-2025 17:54:02 | 2025-11-04 22:54:03 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 04-Nov-2025 17:54:02 | 2025-11-04 22:54:03 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 04-Nov-2025 17:54:02 | 2025-11-04 22:54:03 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:54:02 | 2025-11-04 22:54:03 INFO calibrater::correct Beginning correct--------------------------- |
| 04-Nov-2025 17:54:02 | 2025-11-04 22:54:03 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 04-Nov-2025 17:54:02 | 2025-11-04 22:54:03 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Nov-2025 17:54:04 | 2025-11-04 22:54:05 INFO calibrater::correct Finished correcting. |
| 04-Nov-2025 17:54:05 | 2025-11-04 22:54:05 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 04-Nov-2025 17:54:05 | test_tool_calibrater.py::calibrater_test::test_writeToCorrected |
| 04-Nov-2025 17:54:05 | Check that the tool writes to the CORRECTED_DATA column |
| 04-Nov-2025 17:54:05 | PASSED |
| 04-Nov-2025 17:54:05 | |
| 04-Nov-2025 17:54:05 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml - |
| 04-Nov-2025 17:54:05 | ================== 24 passed, 1 warning in 170.89s (0:02:50) =================== |
| 04-Nov-2025 17:54:05 | ============================= test session starts ============================== |
| 04-Nov-2025 17:54:05 | platform linux -- Python 3.12.9, pytest-8.4.2, pluggy-1.6.0 -- /home/casatest/venv/bin/python3.12 |
| 04-Nov-2025 17:54:05 | cachedir: .pytest_cache |
| 04-Nov-2025 17:54:05 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_logsink |
| 04-Nov-2025 17:54:05 | configfile: pytest.ini |
| 04-Nov-2025 17:54:06 | collecting ... collected 4 items |
| 04-Nov-2025 17:54:06 | |
| 04-Nov-2025 17:54:06 | |
| 04-Nov-2025 17:54:06 | test_tool_logsink.py::LogsinkTest::test_getorigin_initial_origin |
| 04-Nov-2025 17:54:06 | Check the initial value of logsink.origin by getorigin. |
| 04-Nov-2025 17:54:06 | PASSED |
| 04-Nov-2025 17:54:06 | |
| 04-Nov-2025 17:54:06 | test_tool_logsink.py::LogsinkTest::test_getorigin_set_nullvalues |
| 04-Nov-2025 17:54:06 | Check that the null values set logsink.origin can get correctly by getorigin. |
| 04-Nov-2025 17:54:06 | PASSED |
| 04-Nov-2025 17:54:06 | |
| 04-Nov-2025 17:54:06 | test_tool_logsink.py::LogsinkTest::test_getorigin_set_num |
| 04-Nov-2025 17:54:06 | Check that the numeric values set logsink.origin can get correctly by getorigin. |
| 04-Nov-2025 17:54:06 | PASSED |
| 04-Nov-2025 17:54:06 | |
| 04-Nov-2025 17:54:06 | test_tool_logsink.py::LogsinkTest::test_getorigin_set_strings |
| 04-Nov-2025 17:54:06 | Check that the string values set logsink.origin can get correctly by getorigin. |
| 04-Nov-2025 17:54:06 | PASSED |
| 04-Nov-2025 17:54:06 | |
| 04-Nov-2025 17:54:06 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_logsink/nose.xml - |
| 04-Nov-2025 17:54:06 | ========================= 4 passed, 1 warning in 0.47s ========================= |
| 04-Nov-2025 17:54:06 | ============================= test session starts ============================== |
| 04-Nov-2025 17:54:06 | platform linux -- Python 3.12.9, pytest-8.4.2, pluggy-1.6.0 -- /home/casatest/venv/bin/python3.12 |
| 04-Nov-2025 17:54:06 | cachedir: .pytest_cache |
| 04-Nov-2025 17:54:06 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager |
| 04-Nov-2025 17:54:06 | configfile: pytest.ini |
| 04-Nov-2025 17:54:07 | collecting ... collected 17 items |
| 04-Nov-2025 17:54:07 | |
| 04-Nov-2025 17:54:07 | |
| 04-Nov-2025 17:54:07 | test_tool_vpmanager.py::vpmanager_test::test0 |
| 04-Nov-2025 17:54:07 | Test 0: reset |
| 04-Nov-2025 17:54:07 | PASSED |
| 04-Nov-2025 17:54:07 | |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps Voltage patterns internally defined in CASA (* = global default for this telescope): |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps+ Telescope: Class |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * ATCA_L1: INVERSE POLYNOMIAL |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * ATCA_L2: POLYNOMIAL |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 WARN PBMath::pbMathInterfaceForCommonPB ATCA_L3 not yet implemented defaulting to L2 version |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * ATCA_L3: POLYNOMIAL |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * ATCA_S: INVERSE POLYNOMIAL |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO PBMath1DIPoly::fillPBArray Using wideband interpolated beam pattern |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * ATCA_C: INVERSE POLYNOMIAL |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO PBMath1DIPoly::fillPBArray Using wideband interpolated beam pattern |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * ATCA_X: INVERSE POLYNOMIAL |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * GBT: POLYNOMIAL |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * GMRT: NUMERIC |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * HATCREEK: GAUSSIAN |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * NRAO12M: NUMERIC |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * UNKNOWN: NUMERIC |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * OVRO: NUMERIC |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * VLA: POLYNOMIAL |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * VLA_INVERSE: INVERSE POLYNOMIAL |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * VLA_NVSS: AIRY |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * VLA_2NULL: AIRY |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * VLA_4: AIRY |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * VLA_P: AIRY |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * VLA_L: AIRY |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * VLA_C: AIRY |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * VLA_X: AIRY |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * VLA_U: AIRY |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * VLA_K: AIRY |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * VLA_Q: AIRY |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * WSRT: COSINE POLYNOMIAL |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * WSRT_LOW: COSINE POLYNOMIAL |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * ALMA: AIRY |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * ALMASD: AIRY |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * ACA: AIRY |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * IRAMPDB: AIRY |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * IRAM30M: AIRY |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * SMA: NUMERIC |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * ATA: AIRY |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO PBMath::pbMathInterfaceForCommonPB PBMath using 2011/10/22 5.5GHz PB |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * ATCA_C_RI: NUMERIC |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * ATCA: INVERSE POLYNOMIAL |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO PBMath1DIPoly::fillPBArray Using wideband interpolated beam pattern |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * ATCA_16: INVERSE POLYNOMIAL |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * ATCA_K: INVERSE POLYNOMIAL |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * ATCA_Q: INVERSE POLYNOMIAL |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * ATCA_W: INVERSE POLYNOMIAL |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * EVLA: POLYNOMIAL |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps * NGVLA: AIRY |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps+ Externally defined voltage patterns (* = global default for this telescope): |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vpmanager::summarizevps None |
| 04-Nov-2025 17:54:07 | test_tool_vpmanager.py::vpmanager_test::test1 |
| 04-Nov-2025 17:54:07 | Test 1: summarizevps |
| 04-Nov-2025 17:54:07 | PASSED |
| 04-Nov-2025 17:54:07 | |
| 04-Nov-2025 17:54:07 | test_tool_vpmanager.py::vpmanager_test::test10 |
| 04-Nov-2025 17:54:07 | Test 10: define Airy beams for ALMA antenna types, then use them |
| 04-Nov-2025 17:54:07 | PASSED |
| 04-Nov-2025 17:54:07 | |
| 04-Nov-2025 17:54:07 | test_tool_vpmanager.py::vpmanager_test::test11 |
| 04-Nov-2025 17:54:07 | Test 11: getvp without observation parameters |
| 04-Nov-2025 17:54:07 | PASSED |
| 04-Nov-2025 17:54:07 | |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vp::createantresp Found 0 response images in directory /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/mydir3 |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 SEVERE vp::createantresp No images found in directory mydir3 |
| 04-Nov-2025 17:54:07 | test_tool_vpmanager.py::vpmanager_test::test12 |
| 04-Nov-2025 17:54:07 | Test 12: EXPECTED ERROR createantresp - no images |
| 04-Nov-2025 17:54:07 | PASSED |
| 04-Nov-2025 17:54:07 | |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vp::createantresp Found 6 response images in directory /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/mydir3 |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 SEVERE vp::createantresp Image ALMA_0_DV__0._0._360._0._45._90._80._100._110._GHz_ticra2007_EFP.im has band definition inconsistent with the available bands. |
| 04-Nov-2025 17:54:07 | test_tool_vpmanager.py::vpmanager_test::test13 |
| 04-Nov-2025 17:54:07 | Test 13: EXPECTED ERROR createantresp - two images have faulty band def |
| 04-Nov-2025 17:54:07 | PASSED |
| 04-Nov-2025 17:54:07 | |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:07 INFO vp::createantresp Found 6 response images in directory /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/mydir3 |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:08 INFO vp::createantresp Created antenna responses table /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/mydir3/AntennaResponses |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:08 INFO vp::createantresp+ with 2 rows. |
| 04-Nov-2025 17:54:07 | test_tool_vpmanager.py::vpmanager_test::test14 |
| 04-Nov-2025 17:54:07 | Test 14: createantresp - good input: six images, two antenna types |
| 04-Nov-2025 17:54:07 | PASSED |
| 04-Nov-2025 17:54:07 | |
| 04-Nov-2025 17:54:07 | 2025-11-04 22:54:08 SEVERE vp::getrespimagename No antenna responses path set for observatory: "ALMA2" in the AntennaResponses column of the Observatories table. |
| 04-Nov-2025 17:54:07 | test_tool_vpmanager.py::vpmanager_test::test15 |
| 04-Nov-2025 17:54:07 | Test 15: EXPECTED ERROR get image name from non-existant observatory |
| 04-Nov-2025 17:54:07 | PASSED |
| 04-Nov-2025 17:54:07 | |
| 04-Nov-2025 17:54:08 | 2025-11-04 22:54:08 INFO vpmanager::loadfromtable Loaded 1 VP definitions and 41 VP default settings from table mydefs.tab |
| 04-Nov-2025 17:54:08 | test_tool_vpmanager.py::vpmanager_test::test16 |
| 04-Nov-2025 17:54:08 | Test 16: define Airy beam for ALMA, save it, load it, then use it |
| 04-Nov-2025 17:54:08 | PASSED |
| 04-Nov-2025 17:54:08 | |
| 04-Nov-2025 17:54:08 | test_tool_vpmanager.py::vpmanager_test::test2 |
| 04-Nov-2025 17:54:08 | Test 2: getvp for VLA |
| 04-Nov-2025 17:54:08 | PASSED |
| 04-Nov-2025 17:54:08 | |
| 04-Nov-2025 17:54:08 | test_tool_vpmanager.py::vpmanager_test::test3 |
| 04-Nov-2025 17:54:08 | Test 3: getvp and getvps for ALMA |
| 04-Nov-2025 17:54:08 | PASSED |
| 04-Nov-2025 17:54:08 | |
| 04-Nov-2025 17:54:08 | test_tool_vpmanager.py::vpmanager_test::test4 |
| 04-Nov-2025 17:54:08 | Test 4: numvps for VLA |
| 04-Nov-2025 17:54:08 | PASSED |
| 04-Nov-2025 17:54:08 | |
| 04-Nov-2025 17:54:08 | test_tool_vpmanager.py::vpmanager_test::test5 |
| 04-Nov-2025 17:54:08 | Test 5: numvps for ALMA |
| 04-Nov-2025 17:54:08 | PASSED |
| 04-Nov-2025 17:54:08 | |
| 04-Nov-2025 17:54:08 | test_tool_vpmanager.py::vpmanager_test::test6 |
| 04-Nov-2025 17:54:08 | Test 6: numvps for ALMA with too high freq |
| 04-Nov-2025 17:54:08 | PASSED |
| 04-Nov-2025 17:54:08 | |
| 04-Nov-2025 17:54:08 | test_tool_vpmanager.py::vpmanager_test::test7 |
| 04-Nov-2025 17:54:08 | Test 7: setuserdefault for ALMA |
| 04-Nov-2025 17:54:08 | PASSED |
| 04-Nov-2025 17:54:08 | |
| 04-Nov-2025 17:54:08 | test_tool_vpmanager.py::vpmanager_test::test8 |
| 04-Nov-2025 17:54:08 | Test 8: define Airy beam for ALMA, then use it |
| 04-Nov-2025 17:54:08 | PASSED |
| 04-Nov-2025 17:54:08 | |
| 04-Nov-2025 17:54:08 | 2025-11-04 22:54:09 INFO BeamCalc::setBeamCalcGeometries() Initialisation of geometries for observatory ALMA, antenna type DV |
| 04-Nov-2025 17:54:08 | test_tool_vpmanager.py::vpmanager_test::test9 Processing request for geometries from observatory ALMA, antenna type DV |
| 04-Nov-2025 17:54:08 | 2025-11-04 22:54:09 INFO BeamCalc::setBeamCalcGeometries() from file /opt/casa/data/master/alma/responses/ALMA_0_DV__0_0_360_0_45_90_31_506_950_GHz_beamcalc_INTERNAL.txt |
| 04-Nov-2025 17:54:08 | 2025-11-04 22:54:09 INFO BeamCalc::setBeamCalcGeometries()+ ... successful. |
| 04-Nov-2025 17:54:08 | **Writing ALMA Apertures for Pol 9 to disk |
| 04-Nov-2025 17:54:09 | Done writing apertures to disk |
| 04-Nov-2025 17:54:10 | 2025-11-04 22:54:10 INFO BeamCalc::setBeamCalcGeometries() Initialisation of geometries for observatory ALMA, antenna type DA |
| 04-Nov-2025 17:54:10 | Processing request for geometries from observatory ALMA, antenna type DA |
| 04-Nov-2025 17:54:10 | 2025-11-04 22:54:10 INFO BeamCalc::setBeamCalcGeometries() from file /opt/casa/data/master/alma/responses/ALMA_0_DA__0_0_360_0_45_90_31_506_950_GHz_beamcalc_INTERNAL.txt |
| 04-Nov-2025 17:54:10 | 2025-11-04 22:54:10 INFO BeamCalc::setBeamCalcGeometries()+ ... successful. |
| 04-Nov-2025 17:54:10 | **Writing ALMA Apertures for Pol 9 to disk |
| 04-Nov-2025 17:54:12 | Done writing apertures to disk |
| 04-Nov-2025 17:54:12 | 2025-11-04 22:54:13 INFO BeamCalc::setBeamCalcGeometries() Initialisation of geometries for observatory ALMA, antenna type PM |
| 04-Nov-2025 17:54:12 | Processing request for geometries from observatory ALMA, antenna type PM |
| 04-Nov-2025 17:54:12 | 2025-11-04 22:54:13 INFO BeamCalc::setBeamCalcGeometries() from file /opt/casa/data/master/alma/responses/ALMA_0_PM__0_0_360_0_45_90_31_506_950_GHz_beamcalc_INTERNAL.txt |
| 04-Nov-2025 17:54:12 | 2025-11-04 22:54:13 INFO BeamCalc::setBeamCalcGeometries()+ ... successful. |
| 04-Nov-2025 17:54:12 | **Writing ALMA Apertures for Pol 9 to disk |
| 04-Nov-2025 17:54:13 | Done writing apertures to disk |
| 04-Nov-2025 17:54:13 | Processing request for geometries from observatory ALMA, antenna type CM |
| 04-Nov-2025 17:54:13 | 2025-11-04 22:54:14 INFO BeamCalc::setBeamCalcGeometries() Initialisation of geometries for observatory ALMA, antenna type CM |
| 04-Nov-2025 17:54:14 | 2025-11-04 22:54:14 INFO BeamCalc::setBeamCalcGeometries() from file /opt/casa/data/master/alma/responses/ALMA_0_CM__0_0_360_0_45_90_31_506_950_GHz_beamcalc_INTERNAL.txt |
| 04-Nov-2025 17:54:14 | 2025-11-04 22:54:14 INFO BeamCalc::setBeamCalcGeometries()+ ... successful. |
| 04-Nov-2025 17:54:14 | **Writing ALMA Apertures for Pol 9 to disk |
| 04-Nov-2025 17:54:14 | Done writing apertures to disk |
| 04-Nov-2025 17:54:15 | |
| 04-Nov-2025 17:54:15 | Test 9: define reference to antresp table for ALMA, then use it |
| 04-Nov-2025 17:54:15 | PASSED |
| 04-Nov-2025 17:54:15 | |
| 04-Nov-2025 17:54:15 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_vpmanager/nose.xml - |
| 04-Nov-2025 17:54:15 | ======================== 17 passed, 1 warning in 8.79s ========================= |
| 04-Nov-2025 17:54:15 | ============================= test session starts ============================== |
| 04-Nov-2025 17:54:15 | platform linux -- Python 3.12.9, pytest-8.4.2, pluggy-1.6.0 -- /home/casatest/venv/bin/python3.12 |
| 04-Nov-2025 17:54:15 | cachedir: .pytest_cache |
| 04-Nov-2025 17:54:15 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils |
| 04-Nov-2025 17:54:15 | configfile: pytest.ini |
| 04-Nov-2025 17:54:16 | collecting ... collected 13 items |
| 04-Nov-2025 17:54:16 | |
| 04-Nov-2025 17:54:16 | |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:16 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:16 INFO BeamManipulator::set Setting (global) restoring beam. |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:16 INFO BeamManipulator::set Beam parameters: Major : 1 arcsec |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:16 INFO BeamManipulator::set+ Minor : 1 arcsec |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:16 INFO BeamManipulator::set+ Position Angle : 0 deg |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO SIImageStore::Open existing Images SumWt does not exist. Proceeding only with PSF |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO SynthesisUtilMethods::fitPsfBeam Fitting PSF beam for Imagestore : su_fitpsfbeam_test_mfs |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO SIImageStore::getPSFGaussian Time to fit Gaussian to PSF 0.017661 |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO SIImageStore::printBeamSet Beam : 52.9301 arcsec, 49.1474 arcsec, -87.3942 deg |
| 04-Nov-2025 17:54:16 | test_tool_synthesisutils.py::fitpsfbeam_test::test_mfs |
| 04-Nov-2025 17:54:16 | Test that fitting of mfs psf works |
| 04-Nov-2025 17:54:16 | PASSED |
| 04-Nov-2025 17:54:16 | |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO BeamManipulator::set Setting (global) restoring beam. |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO BeamManipulator::set Beam parameters: Major : 1 arcsec |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO BeamManipulator::set+ Minor : 1 arcsec |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO BeamManipulator::set+ Position Angle : 0 deg |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO SIImageStore::Open existing Images SumWt does not exist. Proceeding only with PSF |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO SynthesisUtilMethods::fitPsfBeam Fitting PSF beam for Imagestore : su_fitpsfbeam_test_mfs |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO SIImageStore::getPSFGaussian Time to fit Gaussian to PSF 0.024516 |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO SIImageStore::printBeamSet Beam : 49.8956 arcsec, 46.8024 arcsec, -88.289 deg |
| 04-Nov-2025 17:54:16 | test_tool_synthesisutils.py::fitpsfbeam_test::test_mfs_largerpsfcutoff |
| 04-Nov-2025 17:54:16 | Test that psfcutoff with a valid (larger) number works |
| 04-Nov-2025 17:54:16 | PASSED |
| 04-Nov-2025 17:54:16 | |
| 04-Nov-2025 17:54:16 | test_tool_synthesisutils.py::fitpsfbeam_test::test_mfs_wrong_nterms |
| 04-Nov-2025 17:54:16 | Test that it catches if nterms is inconsistent with input psf (nterms=2, for a single term psf) |
| 04-Nov-2025 17:54:16 | PASSED |
| 04-Nov-2025 17:54:16 | |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 WARN SynthesisUtilMethods::fitPsfBeam psfcutoff must be >0 and <1 |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 WARN SynthesisUtilMethods::fitPsfBeam psfcutoff must be >0 and <1 |
| 04-Nov-2025 17:54:16 | test_tool_synthesisutils.py::fitpsfbeam_test::test_mfs_wrong_psfcutoff |
| 04-Nov-2025 17:54:16 | Test that psfcutoff is given outside the allowed range (1.0) |
| 04-Nov-2025 17:54:16 | PASSED |
| 04-Nov-2025 17:54:16 | |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO BeamManipulator::set Setting (global) restoring beam. |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO BeamManipulator::set Beam parameters: Major : 1 arcsec |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO BeamManipulator::set+ Minor : 1 arcsec |
| 04-Nov-2025 17:54:16 | 2025-11-04 22:54:17 INFO BeamManipulator::set+ Position Angle : 0 deg |
| 04-Nov-2025 17:54:17 | 2025-11-04 22:54:17 INFO SIImageStoreMultiTerm::Open existing Images SumWt.ttx do not exist. Proceeding only with PSFs |
| 04-Nov-2025 17:54:17 | 2025-11-04 22:54:17 INFO SynthesisUtilMethods::fitPsfBeam Fitting PSF beam for Imagestore : su_fitpsfbeam_test_mtmfs |
| 04-Nov-2025 17:54:17 | 2025-11-04 22:54:17 INFO SIImageStore::getPSFGaussian Time to fit Gaussian to PSF 0.009426 |
| 04-Nov-2025 17:54:17 | 2025-11-04 22:54:17 INFO SIImageStore::printBeamSet Beam : 52.9301 arcsec, 49.1474 arcsec, -87.3942 deg |
| 04-Nov-2025 17:54:17 | test_tool_synthesisutils.py::fitpsfbeam_test::test_mtmfs_nterms2 |
| 04-Nov-2025 17:54:17 | Test that fitting of multiterm psf works |
| 04-Nov-2025 17:54:17 | 2025-11-04 22:54:17 INFO name:: No table opened. |
| 04-Nov-2025 17:54:17 | 2025-11-04 22:54:17 INFO name:: No table opened. |
| 04-Nov-2025 17:54:17 | PASSED |
| 04-Nov-2025 17:54:17 | |
| 04-Nov-2025 17:54:17 | test_tool_synthesisutils.py::getoptimumsize_test::test_default |
| 04-Nov-2025 17:54:17 | Test default size |
| 04-Nov-2025 17:54:17 | PASSED |
| 04-Nov-2025 17:54:17 | |
| 04-Nov-2025 17:54:17 | test_tool_synthesisutils.py::getoptimumsize_test::test_evenimsize |
| 04-Nov-2025 17:54:17 | Test even non-optimal number |
| 04-Nov-2025 17:54:17 | PASSED |
| 04-Nov-2025 17:54:17 | |
| 04-Nov-2025 17:54:17 | test_tool_synthesisutils.py::getoptimumsize_test::test_oddimsize |
| 04-Nov-2025 17:54:17 | Test odd non-optimal number |
| 04-Nov-2025 17:54:17 | 2025-11-04 22:54:17 INFO name:: No table opened. |
| 04-Nov-2025 17:54:17 | 2025-11-04 22:54:17 INFO name:: No table opened. |
| 04-Nov-2025 17:54:17 | PASSED |
| 04-Nov-2025 17:54:17 | |
| 04-Nov-2025 17:54:20 | 2025-11-04 22:54:20 INFO msmetadata_cmpt.cc::open Performing internal consistency checks on twhya.short.ms... |
| 04-Nov-2025 17:54:20 | 2025-11-04 22:54:20 INFO msmetadata_cmpt.cc::open Performing internal consistency checks on twhya.short.ms... |
| 04-Nov-2025 17:54:20 | test_tool_synthesisutils.py::advisechansel_test::test_advisechanelsel_datasel |
| 04-Nov-2025 17:54:20 | Test that data selection parameters or given frequency range, etc is returned correctly |
| 04-Nov-2025 17:54:20 | PASSED |
| 04-Nov-2025 17:54:20 | |
| 04-Nov-2025 17:54:22 | test_tool_synthesisutils.py::advisechansel_test::test_advisechanelsel_datasel_ephem |
| 04-Nov-2025 17:54:22 | Test that data selection parameters for given frequency range,etc for ephemeris object is returned correctly |
| 04-Nov-2025 17:54:22 | PASSED |
| 04-Nov-2025 17:54:22 | |
| 04-Nov-2025 17:54:24 | 2025-11-04 22:54:24 SEVERE No MeasurementSet has been assigned, please give a valid ms in msname |
| 04-Nov-2025 17:54:24 | test_tool_synthesisutils.py::advisechansel_test::test_su_adivsechanel_defaults |
| 04-Nov-2025 17:54:24 | Test non specified parameter case for proper error/warning message |
| 04-Nov-2025 17:54:24 | PASSED |
| 04-Nov-2025 17:54:24 | |
| 04-Nov-2025 17:54:26 | test_tool_synthesisutils.py::advisechansel_test::test_su_adivsechansel_getfreqrange |
| 04-Nov-2025 17:54:26 | Test that frequency range for given data selections is returned correctly |
| 04-Nov-2025 17:54:26 | PASSED |
| 04-Nov-2025 17:54:26 | |
| 04-Nov-2025 17:54:28 | test_tool_synthesisutils.py::advisechansel_test::test_su_advisechansel_getfreqrange_ephem |
| 04-Nov-2025 17:54:28 | Test that frequency range for given data selections for an ephemeris object is returned correctly |
| 04-Nov-2025 17:54:28 | 2025-11-04 22:54:28 INFO name:: No table opened. |
| 04-Nov-2025 17:54:28 | 2025-11-04 22:54:28 INFO name:: No table opened. |
| 04-Nov-2025 17:54:28 | PASSED |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_synthesisutils/nose.xml - |
| 04-Nov-2025 17:54:28 | ======================== 13 passed, 1 warning in 12.58s ======================== |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pbcor/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pv/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_rebin/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics/ |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_statistics/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics/ |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_deviation/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/ |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_simulator/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/ |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_sdm/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_agentflagger/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_componentlist/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_transpose/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms/ |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_sdm_toms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms/ |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image/ |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image/ |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_linearmosaic/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_logsink/ |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_logsink |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_logsink/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_logsink/ |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_vpmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils/ |
| 04-Nov-2025 17:54:28 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils |
| 04-Nov-2025 17:54:28 | |
| 04-Nov-2025 17:54:28 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_synthesisutils/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_synthesisutils/ |
| 04-Nov-2025 17:54:33 | total 77004 |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci 15001 136877 Nov 4 22:21 casatestutils-6.7.3.2+dirty-py3-none-any.whl |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci 15001 78544193 Nov 4 22:21 casatools-6.7.3.2+dirty-cp312-cp312-manylinux_2_28_x86_64.whl |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 4340 Nov 4 22:54 test_tool_agentflagger.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 1006 Nov 4 22:54 test_tool_calanalysis.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 2659 Nov 4 22:54 test_tool_calibrater.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 687 Nov 4 22:54 test_tool_componentlist.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 7467 Nov 4 22:54 test_tool_coordsys.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 12936 Nov 4 22:54 test_tool_image.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 2221 Nov 4 22:54 test_tool_image_collapse.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 1048 Nov 4 22:54 test_tool_image_deviation.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 2576 Nov 4 22:54 test_tool_image_fitprofile.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 1179 Nov 4 22:54 test_tool_image_pbcor.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 884 Nov 4 22:54 test_tool_image_pv.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 1006 Nov 4 22:54 test_tool_image_rebin.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 1336 Nov 4 22:54 test_tool_image_regrid.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 1533 Nov 4 22:54 test_tool_image_statistics.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 765 Nov 4 22:54 test_tool_image_subimage.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 891 Nov 4 22:54 test_tool_image_transpose.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 1966 Nov 4 22:54 test_tool_imagepol.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 839 Nov 4 22:54 test_tool_linearmosaic.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 668 Nov 4 22:54 test_tool_logsink.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 549 Nov 4 22:54 test_tool_measures.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 5227 Nov 4 22:54 test_tool_ms.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 367 Nov 4 22:54 test_tool_ms_createmultims.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 2095 Nov 4 22:54 test_tool_ms_statwt.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 8633 Nov 4 22:54 test_tool_msmetadata.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 359 Nov 4 22:54 test_tool_msuvbinner.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 1171 Nov 4 22:54 test_tool_quanta.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 3978 Nov 4 22:54 test_tool_regionmanager.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 2074 Nov 4 22:54 test_tool_sdm.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 2103 Nov 4 22:54 test_tool_sdm_toms.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 670 Nov 4 22:54 test_tool_simulator.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 1717 Nov 4 22:54 test_tool_synthesisutils.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 1462 Nov 4 22:54 test_tool_table.xml |
| 04-Nov-2025 17:54:33 | -rw-r--r-- 1 casaci root 1717 Nov 4 22:54 test_tool_vpmanager.xml |
| 04-Nov-2025 17:54:33 | Finished task 'Test wheel' with result: Success |
| 04-Nov-2025 17:54:33 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
| 04-Nov-2025 17:54:33 | Parsing test results under /export/home/cbt-el7-11/bamboohome/xml-data/build-dir/CASASPECS-CI-TTOML228... |
| 04-Nov-2025 17:54:33 | Finished task 'Parse tests' with result: Success |
| 04-Nov-2025 17:54:33 | Starting task 'Cleanup' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
| 04-Nov-2025 17:54:33 | Beginning to execute external process for build 'CASASPECS - CI Build - Test Tools Many Linux 2.28 #251 (CASASPECS-CI-TTOML228-251)' ... running command line: /export/home/cbt-el7-11/bamboohome/temp/CASASPECS-CI-TTOML228-251-ScriptBuildTask-9898323396085943747.sh ... in: /export/home/cbt-el7-11/bamboohome/xml-data/build-dir/CASASPECS-CI-TTOML228 |
| 04-Nov-2025 17:54:33 | Starting cleanup |
| 04-Nov-2025 17:54:47 | wheel-container-test |
| 04-Nov-2025 17:54:50 | wheel-container-test |
| 04-Nov-2025 17:54:50 | Cleanup complete |
| 04-Nov-2025 17:54:50 | Finished task 'Cleanup' with result: Success |
| 04-Nov-2025 17:54:50 | Running post build plugin 'Docker Container Cleanup' |
| 04-Nov-2025 17:54:50 | Beginning to execute external process for build 'CASASPECS - CI Build - Test Tools Many Linux 2.28 #251 (CASASPECS-CI-TTOML228-251)' ... running command line: /bin/docker rm -f wheel-container-test ... in: /export/home/cbt-el7-11/bamboohome/xml-data/build-dir/CASASPECS-CI-TTOML228 |
| 04-Nov-2025 17:54:50 | Error response from daemon: No such container: wheel-container-test |
| 04-Nov-2025 17:54:50 | Running post build plugin 'NCover Results Collector' |
| 04-Nov-2025 17:54:50 | Running post build plugin 'Build Results Label Collector' |
| 04-Nov-2025 17:54:51 | Running post build plugin 'Clover Results Collector' |
| 04-Nov-2025 17:54:51 | Running post build plugin 'npm Cache Cleanup' |
| 04-Nov-2025 17:54:51 | Running post build plugin 'Artifact Copier' |
| 04-Nov-2025 17:54:51 | Publishing an artifact: Tests |
| 04-Nov-2025 17:54:51 | Finished publishing of artifact Non required job artifact Http Compression On : [Tests], patterns: [*.xml] anchored at: [wheeldirectory/] in 413.2 ms |
| 04-Nov-2025 17:54:51 | Publishing an artifact: xml Directories |
| 04-Nov-2025 17:54:51 | Finished publishing of artifact Non required job artifact Http Compression On : [xml Directories], patterns: [**/*.xml] anchored at: [wheeldirectory/] in 187.4 ms |
| 04-Nov-2025 17:54:51 | Finalising the build... |
| 04-Nov-2025 17:54:51 | Stopping timer. |
| 04-Nov-2025 17:54:51 | Build CASASPECS-CI-TTOML228-251 completed. |
| 04-Nov-2025 17:54:52 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
| 04-Nov-2025 17:54:52 | Running on server: post build plugin 'NCover Results Collector' |
| 04-Nov-2025 17:54:52 | Running on server: post build plugin 'Build Labeller' |
| 04-Nov-2025 17:54:52 | Running on server: post build plugin 'Clover Delta Calculator' |
| 04-Nov-2025 17:54:52 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
| 04-Nov-2025 17:54:52 | All post build plugins have finished |
| 04-Nov-2025 17:54:52 | Generating build results summary... |
| 04-Nov-2025 17:54:52 | Saving build results to disk... |
| 04-Nov-2025 17:54:52 | Store variable context... |
| 04-Nov-2025 17:54:52 | Finished building CASASPECS-CI-TTOML228-251. |