Build: #3 was successful
Job: Test Tasks OSX12 was successful
Job result summary
- Completed
- Duration
- 165 minutes
- Agent
- cbt-m1.cv.nrao.edu (2)
- Total tests
- 3472
Tests
- 3,472 tests in total
- 250 tests were quarantined / skipped
- 153 minutes taken in total.
Error summary
The build generated some errors. See the full build log for more details.
Already on 'master'
Already on 'master'
2024-01-04 23:14:01 SEVERE simobserve::::casa+ ... thrown by static casa::ITUPLE casa::ImageFactory::fromFile(const casacore::String &, casacore::Bool) at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 289
2024-01-04 23:14:04 SEVERE simobserve::::casa Task simobserve raised an exception of class Exception with the following message: No valid lines found in pointing file
2024-01-04 23:14:07 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:07 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:07 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:07 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:08 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:08 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:08 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:08 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:08 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:09 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:09 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:09 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:09 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:09 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:10 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:10 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:11 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:13 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:13 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:13 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:13 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:13 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:14 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:14 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:16 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:18 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2024-01-04 23:14:19 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:19 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:19 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:19 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:21 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:21 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:21 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:21 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:22 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:22 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:22 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:22 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:22 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:23 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:23 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:23 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:23 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:23 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:24 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:24 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2024-01-04 23:14:24 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2024-01-04 23:14:24 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2024-01-04 23:14:25 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: Exception: There are not enough points (2) along the fit axis to fit 3 unknowns.
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile+ ... thrown by casacore::Record casa::ImageProfileFitter::fit(casacore::Bool) at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageProfileFitter.cc, line: 238
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: Exception: Specified fit axis 5 must be less than the number of image axes (4).
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile+ ... thrown by void casa::ImageProfileFitter::_finishConstruction() at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageProfileFitter.cc, line: 579
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: Exception: box not specified correctly.
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile+ ... thrown by casacore::Record casa::CasacRegionManager::fromBCS(casacore::String &, casacore::uInt &, casacore::String &, const casacore::Record *const &, const casacore::String &, const casacore::String &, const casa::CasacRegionManager::StokesControl, const casacore::String &, const casacore::IPosition &, const casacore::String &, casacore::Bool) at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/Regions/CasacRegionManager.cc, line: 235
2024-01-04 23:14:26 SEVERE specfit::CasacRegionManager::_fromBCS trc in box spec is greater than or equal to number of direction coordinate pixels in the image
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: 2024-01-04 23:14:26 SEVERE specfit::CasacRegionManager::_fromBCS trc in box spec is greater than or equal to number of direction coordinate pixels in the image
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: Invalid channel specification in abc of spec abc at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/IO/ParameterParser.cc, line: 176
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: Invalid channel specification in 0-200 of spec 0-200 at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/IO/ParameterParser.cc, line: 176
2024-01-04 23:14:26 SEVERE specfit::CasacRegionManager::_setPolarizationRanges (Sub)String ABC in stokes specification part ABC does not match a known polarization.
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: 2024-01-04 23:14:26 SEVERE specfit::CasacRegionManager::_setPolarizationRanges (Sub)String ABC in stokes specification part ABC does not match a known polarization.
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: LCBox::LCBox - blc [0, 0, 0, 0] must be <= trc [8, 8, 99, -2147483648]
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: Exception: Number of non-polynomials is 0 and polynomial order is less than zero. According to these inputs there is nothing to fit..
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile+ ... thrown by void casa::ImageProfileFitter::_checkNGaussAndPolyOrder() const at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageProfileFitter.cc, line: 568
2024-01-04 23:14:26 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
....10....20....30....40....50....60....70....80....90....100%
2024-01-04 23:15:10 SEVERE specfit::image::fitprofile Exception Reported: The input image shape ([9, 9, 100, 1]) and mask shape ([9, 9, 1, 1]) are different, and it was specified that the mask should not be extended, so the mask cannot be applied to the (sub)image. Specifying that the mask should be extended may resolve the issue at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 306
2024-01-04 23:15:10 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:15:12 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release.
2024-01-04 23:15:12 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:15:12 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release.
2024-01-04 23:15:12 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator.
2024-01-04 23:15:13 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release.
2024-01-04 23:15:13 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator.
2024-01-04 23:15:13 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release.
2024-01-04 23:15:13 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator.
2024-01-04 23:15:14 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release.
2024-01-04 23:15:14 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator.
2024-01-04 23:15:14 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release.
2024-01-04 23:15:14 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator.
2024-01-04 23:15:15 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release.
2024-01-04 23:15:15 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator.
2024-01-04 23:15:19 WARN ImageCollapser::_doMultipleBeams Input image has per plane beams but the collapse is not done exclusively along the direction axes. The output image will arbitrarily have a single beam which is the first beam available in the subimage.Thus, the image planes will not be convolved to a common restoring beam before collapsing. If, however, this is desired, then run the task imsmooth or the tool method ia.convolve2d() first, and use the output image of that as the input for collapsing.
2024-01-04 23:15:19 SEVERE imcollapse::image::collapse (file /private/var/folders/q5/jwdh98d515sfrgtg33cs5p_80000gq/T/build-via-sdist-vl7dvz91/casatools-6.6.3.14+dirty/src/tools/image/image_cmpt.cc, line 712) Exception Reported: Unknown aggregate function specified by bogus function at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageCollapserData.cc, line: 84
2024-01-04 23:15:19 SEVERE imcollapse::::casa Task imcollapse raised an exception of class RuntimeError with the following message: Unknown aggregate function specified by bogus function at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageCollapserData.cc, line: 84
2024-01-04 23:15:19 SEVERE imcollapse::::casa Task imcollapse raised an exception of class RuntimeError with the following message: outfile must be specified
2024-01-04 23:15:19 SEVERE imcollapse::::casa Task imcollapse raised an exception of class RuntimeError with the following message: outfile must be specified
2024-01-04 23:15:19 SEVERE imcollapse::::casa Task imcollapse raised an exception of class RuntimeError with the following message: outfile must be specified
2024-01-04 23:15:19 SEVERE imcollapse::::casa Task imcollapse raised an exception of class RuntimeError with the following message: outfile must be specified
2024-01-04 23:15:19 SEVERE imcollapse::::casa Task imcollapse raised an exception of class RuntimeError with the following message: outfile must be specified
2024-01-04 23:15:19 SEVERE image::collapse (file /private/var/folders/q5/jwdh98d515sfrgtg33cs5p_80000gq/T/build-via-sdist-vl7dvz91/casatools-6.6.3.14+dirty/src/tools/image/image_cmpt.cc, line 712) Exception Reported: Unable to calculate flux density: [] at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageCollapser.tcc, line: 433
2024-01-04 23:15:25 SEVERE calstat::open::/Volumes/EXT/casatestdata/unittest/calstat/ Exception Reported: Table /Volumes/EXT/casatestdata/unittest/calstat/ does not exist
2024-01-04 23:15:25 SEVERE calstat::::casa Task calstat raised an exception of class RuntimeError with the following message: Table /Volumes/EXT/casatestdata/unittest/calstat/ does not exist
Already on 'master'
2024-01-04 23:14:01 SEVERE simobserve::::casa+ ... thrown by static casa::ITUPLE casa::ImageFactory::fromFile(const casacore::String &, casacore::Bool) at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 289
2024-01-04 23:14:04 SEVERE simobserve::::casa Task simobserve raised an exception of class Exception with the following message: No valid lines found in pointing file
2024-01-04 23:14:07 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:07 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:07 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:07 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:08 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:08 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:08 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:08 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:08 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:09 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:09 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:09 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:09 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:09 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:10 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:10 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:11 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:13 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:13 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:13 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:13 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:13 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:14 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:14 WARN uvmodelfit::calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:14:16 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:18 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2024-01-04 23:14:19 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:19 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:19 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:19 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:21 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:21 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:21 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:21 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:22 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:22 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:22 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:22 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:22 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:23 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:23 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:23 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:23 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:23 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:24 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:14:24 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2024-01-04 23:14:24 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2024-01-04 23:14:24 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2024-01-04 23:14:25 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: Exception: There are not enough points (2) along the fit axis to fit 3 unknowns.
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile+ ... thrown by casacore::Record casa::ImageProfileFitter::fit(casacore::Bool) at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageProfileFitter.cc, line: 238
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: Exception: Specified fit axis 5 must be less than the number of image axes (4).
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile+ ... thrown by void casa::ImageProfileFitter::_finishConstruction() at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageProfileFitter.cc, line: 579
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: Exception: box not specified correctly.
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile+ ... thrown by casacore::Record casa::CasacRegionManager::fromBCS(casacore::String &, casacore::uInt &, casacore::String &, const casacore::Record *const &, const casacore::String &, const casacore::String &, const casa::CasacRegionManager::StokesControl, const casacore::String &, const casacore::IPosition &, const casacore::String &, casacore::Bool) at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/Regions/CasacRegionManager.cc, line: 235
2024-01-04 23:14:26 SEVERE specfit::CasacRegionManager::_fromBCS trc in box spec is greater than or equal to number of direction coordinate pixels in the image
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: 2024-01-04 23:14:26 SEVERE specfit::CasacRegionManager::_fromBCS trc in box spec is greater than or equal to number of direction coordinate pixels in the image
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: Invalid channel specification in abc of spec abc at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/IO/ParameterParser.cc, line: 176
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: Invalid channel specification in 0-200 of spec 0-200 at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/IO/ParameterParser.cc, line: 176
2024-01-04 23:14:26 SEVERE specfit::CasacRegionManager::_setPolarizationRanges (Sub)String ABC in stokes specification part ABC does not match a known polarization.
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: 2024-01-04 23:14:26 SEVERE specfit::CasacRegionManager::_setPolarizationRanges (Sub)String ABC in stokes specification part ABC does not match a known polarization.
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: LCBox::LCBox - blc [0, 0, 0, 0] must be <= trc [8, 8, 99, -2147483648]
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile Exception Reported: Exception: Number of non-polynomials is 0 and polynomial order is less than zero. According to these inputs there is nothing to fit..
2024-01-04 23:14:26 SEVERE specfit::image::fitprofile+ ... thrown by void casa::ImageProfileFitter::_checkNGaussAndPolyOrder() const at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageProfileFitter.cc, line: 568
2024-01-04 23:14:26 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
....10....20....30....40....50....60....70....80....90....100%
2024-01-04 23:15:10 SEVERE specfit::image::fitprofile Exception Reported: The input image shape ([9, 9, 100, 1]) and mask shape ([9, 9, 1, 1]) are different, and it was specified that the mask should not be extended, so the mask cannot be applied to the (sub)image. Specifying that the mask should be extended may resolve the issue at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 306
2024-01-04 23:15:10 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2024-01-04 23:15:12 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release.
2024-01-04 23:15:12 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-01-04 23:15:12 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release.
2024-01-04 23:15:12 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator.
2024-01-04 23:15:13 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release.
2024-01-04 23:15:13 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator.
2024-01-04 23:15:13 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release.
2024-01-04 23:15:13 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator.
2024-01-04 23:15:14 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release.
2024-01-04 23:15:14 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator.
2024-01-04 23:15:14 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release.
2024-01-04 23:15:14 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator.
2024-01-04 23:15:15 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release.
2024-01-04 23:15:15 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator.
2024-01-04 23:15:19 WARN ImageCollapser::_doMultipleBeams Input image has per plane beams but the collapse is not done exclusively along the direction axes. The output image will arbitrarily have a single beam which is the first beam available in the subimage.Thus, the image planes will not be convolved to a common restoring beam before collapsing. If, however, this is desired, then run the task imsmooth or the tool method ia.convolve2d() first, and use the output image of that as the input for collapsing.
2024-01-04 23:15:19 SEVERE imcollapse::image::collapse (file /private/var/folders/q5/jwdh98d515sfrgtg33cs5p_80000gq/T/build-via-sdist-vl7dvz91/casatools-6.6.3.14+dirty/src/tools/image/image_cmpt.cc, line 712) Exception Reported: Unknown aggregate function specified by bogus function at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageCollapserData.cc, line: 84
2024-01-04 23:15:19 SEVERE imcollapse::::casa Task imcollapse raised an exception of class RuntimeError with the following message: Unknown aggregate function specified by bogus function at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageCollapserData.cc, line: 84
2024-01-04 23:15:19 SEVERE imcollapse::::casa Task imcollapse raised an exception of class RuntimeError with the following message: outfile must be specified
2024-01-04 23:15:19 SEVERE imcollapse::::casa Task imcollapse raised an exception of class RuntimeError with the following message: outfile must be specified
2024-01-04 23:15:19 SEVERE imcollapse::::casa Task imcollapse raised an exception of class RuntimeError with the following message: outfile must be specified
2024-01-04 23:15:19 SEVERE imcollapse::::casa Task imcollapse raised an exception of class RuntimeError with the following message: outfile must be specified
2024-01-04 23:15:19 SEVERE imcollapse::::casa Task imcollapse raised an exception of class RuntimeError with the following message: outfile must be specified
2024-01-04 23:15:19 SEVERE image::collapse (file /private/var/folders/q5/jwdh98d515sfrgtg33cs5p_80000gq/T/build-via-sdist-vl7dvz91/casatools-6.6.3.14+dirty/src/tools/image/image_cmpt.cc, line 712) Exception Reported: Unable to calculate flux density: [] at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR107-BPOSX12PY38N/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageCollapser.tcc, line: 433
2024-01-04 23:15:25 SEVERE calstat::open::/Volumes/EXT/casatestdata/unittest/calstat/ Exception Reported: Table /Volumes/EXT/casatestdata/unittest/calstat/ does not exist
2024-01-04 23:15:25 SEVERE calstat::::casa Task calstat raised an exception of class RuntimeError with the following message: Table /Volumes/EXT/casatestdata/unittest/calstat/ does not exist