Build: #3 failed
Job: Test Tools Macos 12 was successful
Build log
The build generated 52,833 lines of output.The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
| 06-Jun-2024 16:57:22 | PASSED |
| 06-Jun-2024 16:57:22 | |
| 06-Jun-2024 16:57:23 | 2024-06-06 20:57:23 INFO name:: No table opened. |
| 06-Jun-2024 16:57:23 | 2024-06-06 20:57:23 INFO showcache:: The Table Cache is empty. |
| 06-Jun-2024 16:57:23 | 2024-06-06 20:57:23 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 06-Jun-2024 16:57:23 | 2024-06-06 20:57:23 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:57:23 | 2024-06-06 20:57:23 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:57:23 | 2024-06-06 20:57:23 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:25 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO name:: No table opened. |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO showcache:: The Table Cache has the following 16 entries: |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO showcache:: 0: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO showcache:: 1: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO showcache:: 2: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO showcache:: 3: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO showcache:: 4: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO showcache:: 5: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO showcache:: 6: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO showcache:: 7: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO showcache:: 8: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO showcache:: 9: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO showcache:: 10: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO showcache:: 11: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO showcache:: 12: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO showcache:: 13: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO showcache:: 14: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 INFO showcache:: 15: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 06-Jun-2024 16:57:25 | 2024-06-06 20:57:26 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 06-Jun-2024 16:57:25 | test_tool_calibrater.py::calibrater_test::test_done |
| 06-Jun-2024 16:57:25 | Check that done closes the active calibrator tool |
| 06-Jun-2024 16:57:25 | PASSED |
| 06-Jun-2024 16:57:25 | |
| 06-Jun-2024 16:57:26 | 2024-06-06 20:57:27 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 06-Jun-2024 16:57:26 | 2024-06-06 20:57:27 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 06-Jun-2024 16:57:26 | 2024-06-06 20:57:27 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:57:26 | 2024-06-06 20:57:27 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:57:26 | 2024-06-06 20:57:27 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:57:28 | 2024-06-06 20:57:29 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:57:28 | 2024-06-06 20:57:29 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:57:28 | 2024-06-06 20:57:29 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:57:28 | 2024-06-06 20:57:29 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 06-Jun-2024 16:57:28 | 2024-06-06 20:57:29 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 06-Jun-2024 16:57:29 | 2024-06-06 20:57:29 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:57:29 | 2024-06-06 20:57:29 INFO calibrater::correct Beginning correct--------------------------- |
| 06-Jun-2024 16:57:29 | 2024-06-06 20:57:29 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 06-Jun-2024 16:57:29 | 2024-06-06 20:57:29 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:57:32 | 2024-06-06 20:57:32 INFO calibrater::correct Finished correcting. |
| 06-Jun-2024 16:57:32 | 2024-06-06 20:57:33 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 06-Jun-2024 16:57:32 | 2024-06-06 20:57:33 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:57:32 | 2024-06-06 20:57:33 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:57:33 | 2024-06-06 20:57:33 INFO calibrater::initcalset Beginning initcalset------------------------ |
| 06-Jun-2024 16:57:33 | 2024-06-06 20:57:33 INFO VisSet::VisSet Initializing MODEL_DATA (to unity) and CORRECTED_DATA (to DATA) |
| 06-Jun-2024 16:57:33 | 2024-06-06 20:57:34 INFO VisSet::VisSet Initialized 328860 rows. |
| 06-Jun-2024 16:57:34 | 2024-06-06 20:57:35 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 06-Jun-2024 16:57:34 | test_tool_calibrater.py::calibrater_test::test_reinitModel |
| 06-Jun-2024 16:57:34 | Check that initcalset will reset the CORRECTED_DATA to unity |
| 06-Jun-2024 16:57:34 | PASSED |
| 06-Jun-2024 16:57:34 | |
| 06-Jun-2024 16:57:35 | 2024-06-06 20:57:35 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 06-Jun-2024 16:57:35 | 2024-06-06 20:57:35 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:57:35 | 2024-06-06 20:57:35 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:57:35 | 2024-06-06 20:57:35 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:37 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:37 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:37 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:37 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:37 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:38 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:38 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:38 INFO Calibrater::setsolve Arranging to SOLVE: |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:38 INFO Calibrater::setsolve . Mf Mueller: table=gaincaltest2.ms.G0 append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:38 INFO calibrater::reset Reseting solve/apply state |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:38 INFO calibrater::solve Beginning solve----------------------------- |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:38 SEVERE Calibrater::solve Caught exception: Please run setsolve before attempting to solve. |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:38 INFO Calibrater::solve Reseting entire solve/apply state. |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:38 SEVERE Exception Reported: Error in Calibrater::solve. |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:38 INFO calibrater::correct Beginning correct--------------------------- |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:38 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:38 INFO Calibrater::correct2 (VI2/VB2) . (None) |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:38 SEVERE Calibrater::correct2 (VI2/VB2) Caught exception: Nothing to Apply |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:38 INFO Calibrater::correct2 (VI2/VB2) Resetting all calibration application settings. |
| 06-Jun-2024 16:57:37 | 2024-06-06 20:57:38 SEVERE Exception Reported: Error in Calibrater::correct. |
| 06-Jun-2024 16:57:38 | 2024-06-06 20:57:38 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 06-Jun-2024 16:57:38 | test_tool_calibrater.py::calibrater_test::test_resetSolveApply |
| 06-Jun-2024 16:57:38 | Check that the reset function can clear set apply and solves |
| 06-Jun-2024 16:57:38 | PASSED |
| 06-Jun-2024 16:57:38 | |
| 06-Jun-2024 16:57:38 | 2024-06-06 20:57:39 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 06-Jun-2024 16:57:38 | 2024-06-06 20:57:39 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:57:38 | 2024-06-06 20:57:39 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:57:38 | 2024-06-06 20:57:39 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:57:40 | 2024-06-06 20:57:41 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:57:40 | 2024-06-06 20:57:41 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:57:40 | 2024-06-06 20:57:41 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:57:41 | 2024-06-06 20:57:42 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 06-Jun-2024 16:57:41 | 2024-06-06 20:57:42 INFO calibrater::reset Reseting solve/apply state |
| 06-Jun-2024 16:57:41 | 2024-06-06 20:57:42 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 06-Jun-2024 16:57:41 | 2024-06-06 20:57:42 INFO Calibrater::selectvis+ Selecting on spw: '1' |
| 06-Jun-2024 16:57:41 | 2024-06-06 20:57:42 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
| 06-Jun-2024 16:57:41 | 2024-06-06 20:57:42 INFO Calibrater::selectvis Frequency selection: |
| 06-Jun-2024 16:57:41 | 2024-06-06 20:57:42 INFO Calibrater::selectvis . Spw 1:0~7 (8 channels, step by 1) |
| 06-Jun-2024 16:57:41 | 2024-06-06 20:57:42 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 06-Jun-2024 16:57:42 | 2024-06-06 20:57:42 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 06-Jun-2024 16:57:42 | test_tool_calibrater.py::calibrater_test::test_returnDict |
| 06-Jun-2024 16:57:42 | Check that the returndict function gives a dictonary with the expected keys |
| 06-Jun-2024 16:57:42 | PASSED |
| 06-Jun-2024 16:57:42 | |
| 06-Jun-2024 16:57:43 | 2024-06-06 20:57:44 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 06-Jun-2024 16:57:43 | 2024-06-06 20:57:44 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:57:43 | 2024-06-06 20:57:44 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:57:43 | 2024-06-06 20:57:44 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:57:45 | 2024-06-06 20:57:45 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:57:45 | 2024-06-06 20:57:46 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:57:45 | 2024-06-06 20:57:46 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:57:45 | 2024-06-06 20:57:46 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 06-Jun-2024 16:57:45 | 2024-06-06 20:57:46 INFO calibrater::reset Reseting solve/apply state |
| 06-Jun-2024 16:57:45 | 2024-06-06 20:57:46 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 06-Jun-2024 16:57:45 | 2024-06-06 20:57:46 INFO Calibrater::selectvis+ Selecting on antenna/baseline: '0' |
| 06-Jun-2024 16:57:45 | 2024-06-06 20:57:46 INFO Calibrater::selectvis By selection 328860 rows are reduced to 65772 |
| 06-Jun-2024 16:57:45 | 2024-06-06 20:57:46 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 06-Jun-2024 16:57:45 | 2024-06-06 20:57:46 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 06-Jun-2024 16:57:45 | 2024-06-06 20:57:46 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 06-Jun-2024 16:57:45 | 2024-06-06 20:57:46 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 06-Jun-2024 16:57:45 | 2024-06-06 20:57:46 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:57:45 | 2024-06-06 20:57:46 INFO calibrater::correct Beginning correct--------------------------- |
| 06-Jun-2024 16:57:45 | 2024-06-06 20:57:46 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 06-Jun-2024 16:57:45 | 2024-06-06 20:57:46 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:57:47 | 2024-06-06 20:57:48 INFO calibrater::correct Finished correcting. |
| 06-Jun-2024 16:57:48 | 2024-06-06 20:57:49 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 06-Jun-2024 16:57:48 | test_tool_calibrater.py::calibrater_test::test_selectVisBaseline |
| 06-Jun-2024 16:57:48 | Check that selectvis properly selects baseline/antenna |
| 06-Jun-2024 16:57:48 | 65772 65772 |
| 06-Jun-2024 16:57:48 | 263088 263088 |
| 06-Jun-2024 16:57:48 | PASSED |
| 06-Jun-2024 16:57:48 | |
| 06-Jun-2024 16:57:49 | 2024-06-06 20:57:50 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 06-Jun-2024 16:57:49 | 2024-06-06 20:57:50 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:57:49 | 2024-06-06 20:57:50 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:57:50 | 2024-06-06 20:57:50 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:57:51 | 2024-06-06 20:57:52 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:57:52 | 2024-06-06 20:57:52 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:57:52 | 2024-06-06 20:57:52 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:57:52 | 2024-06-06 20:57:52 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 06-Jun-2024 16:57:52 | 2024-06-06 20:57:52 INFO calibrater::reset Reseting solve/apply state |
| 06-Jun-2024 16:57:52 | 2024-06-06 20:57:52 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 06-Jun-2024 16:57:52 | 2024-06-06 20:57:52 INFO Calibrater::selectvis+ Selecting on field: '0' |
| 06-Jun-2024 16:57:52 | 2024-06-06 20:57:52 INFO Calibrater::selectvis By selection 328860 rows are reduced to 172260 |
| 06-Jun-2024 16:57:52 | 2024-06-06 20:57:52 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 06-Jun-2024 16:57:52 | 2024-06-06 20:57:52 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 06-Jun-2024 16:57:52 | 2024-06-06 20:57:52 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 06-Jun-2024 16:57:52 | 2024-06-06 20:57:52 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 06-Jun-2024 16:57:52 | 2024-06-06 20:57:52 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:57:52 | 2024-06-06 20:57:52 INFO calibrater::correct Beginning correct--------------------------- |
| 06-Jun-2024 16:57:52 | 2024-06-06 20:57:52 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 06-Jun-2024 16:57:52 | 2024-06-06 20:57:52 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:57:53 | 2024-06-06 20:57:54 INFO calibrater::correct Finished correcting. |
| 06-Jun-2024 16:57:54 | 2024-06-06 20:57:55 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 06-Jun-2024 16:57:54 | test_tool_calibrater.py::calibrater_test::test_selectVisField |
| 06-Jun-2024 16:57:54 | Check that the field is properly selected by selectvis |
| 06-Jun-2024 16:57:54 | PASSED |
| 06-Jun-2024 16:57:54 | |
| 06-Jun-2024 16:57:55 | 2024-06-06 20:57:56 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 06-Jun-2024 16:57:55 | 2024-06-06 20:57:56 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:57:55 | 2024-06-06 20:57:56 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:57:56 | 2024-06-06 20:57:56 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:57:57 | 2024-06-06 20:57:58 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:57:58 | 2024-06-06 20:57:58 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:57:58 | 2024-06-06 20:57:58 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:57:58 | 2024-06-06 20:57:58 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 06-Jun-2024 16:57:58 | 2024-06-06 20:57:58 INFO calibrater::reset Reseting solve/apply state |
| 06-Jun-2024 16:57:58 | 2024-06-06 20:57:58 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 06-Jun-2024 16:57:58 | 2024-06-06 20:57:58 INFO Calibrater::selectvis+ Selecting on intent: '*AMPLI*' |
| 06-Jun-2024 16:57:58 | 2024-06-06 20:57:58 INFO Calibrater::selectvis Selection did not drop any rows |
| 06-Jun-2024 16:57:58 | 2024-06-06 20:57:58 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 06-Jun-2024 16:57:58 | 2024-06-06 20:57:58 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 06-Jun-2024 16:57:58 | 2024-06-06 20:57:58 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 06-Jun-2024 16:57:58 | 2024-06-06 20:57:58 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 06-Jun-2024 16:57:58 | 2024-06-06 20:57:58 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:57:58 | 2024-06-06 20:57:58 INFO calibrater::correct Beginning correct--------------------------- |
| 06-Jun-2024 16:57:58 | 2024-06-06 20:57:58 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 06-Jun-2024 16:57:58 | 2024-06-06 20:57:58 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:58:01 | 2024-06-06 20:58:01 INFO calibrater::correct Finished correcting. |
| 06-Jun-2024 16:58:01 | 2024-06-06 20:58:02 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 06-Jun-2024 16:58:01 | test_tool_calibrater.py::calibrater_test::test_selectVisIntent |
| 06-Jun-2024 16:58:01 | Check that the intent is properly selected by selectvis |
| 06-Jun-2024 16:58:01 | PASSED |
| 06-Jun-2024 16:58:01 | |
| 06-Jun-2024 16:58:02 | 2024-06-06 20:58:03 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 06-Jun-2024 16:58:02 | 2024-06-06 20:58:03 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:58:02 | 2024-06-06 20:58:03 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:58:02 | 2024-06-06 20:58:03 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:58:04 | 2024-06-06 20:58:05 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:58:05 | 2024-06-06 20:58:05 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:58:05 | 2024-06-06 20:58:05 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:58:05 | 2024-06-06 20:58:05 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 06-Jun-2024 16:58:05 | 2024-06-06 20:58:05 INFO calibrater::reset Reseting solve/apply state |
| 06-Jun-2024 16:58:05 | 2024-06-06 20:58:05 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 06-Jun-2024 16:58:05 | 2024-06-06 20:58:05 INFO Calibrater::selectvis+ Selecting by observation IDs: '0' |
| 06-Jun-2024 16:58:05 | 2024-06-06 20:58:05 INFO Calibrater::selectvis By selection 328860 rows are reduced to 318870 |
| 06-Jun-2024 16:58:05 | 2024-06-06 20:58:05 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 06-Jun-2024 16:58:05 | 2024-06-06 20:58:05 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 06-Jun-2024 16:58:05 | 2024-06-06 20:58:05 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 06-Jun-2024 16:58:05 | 2024-06-06 20:58:05 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 06-Jun-2024 16:58:05 | 2024-06-06 20:58:05 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:58:05 | 2024-06-06 20:58:05 INFO calibrater::correct Beginning correct--------------------------- |
| 06-Jun-2024 16:58:05 | 2024-06-06 20:58:05 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 06-Jun-2024 16:58:05 | 2024-06-06 20:58:05 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:58:08 | 2024-06-06 20:58:08 INFO calibrater::correct Finished correcting. |
| 06-Jun-2024 16:58:08 | 2024-06-06 20:58:08 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 06-Jun-2024 16:58:08 | test_tool_calibrater.py::calibrater_test::test_selectVisObs |
| 06-Jun-2024 16:58:08 | PASSED |
| 06-Jun-2024 16:58:08 | |
| 06-Jun-2024 16:58:09 | 2024-06-06 20:58:10 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 06-Jun-2024 16:58:09 | 2024-06-06 20:58:10 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:58:09 | 2024-06-06 20:58:10 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:58:09 | 2024-06-06 20:58:10 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:58:11 | 2024-06-06 20:58:12 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:58:11 | 2024-06-06 20:58:12 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:58:11 | 2024-06-06 20:58:12 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:58:11 | 2024-06-06 20:58:12 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 06-Jun-2024 16:58:11 | 2024-06-06 20:58:12 INFO calibrater::reset Reseting solve/apply state |
| 06-Jun-2024 16:58:11 | 2024-06-06 20:58:12 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 06-Jun-2024 16:58:11 | 2024-06-06 20:58:12 INFO Calibrater::selectvis+ Selecting on scan: '2' |
| 06-Jun-2024 16:58:11 | 2024-06-06 20:58:12 INFO Calibrater::selectvis By selection 328860 rows are reduced to 15660 |
| 06-Jun-2024 16:58:11 | 2024-06-06 20:58:12 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 06-Jun-2024 16:58:11 | 2024-06-06 20:58:12 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 06-Jun-2024 16:58:11 | 2024-06-06 20:58:12 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 06-Jun-2024 16:58:11 | 2024-06-06 20:58:12 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 06-Jun-2024 16:58:11 | 2024-06-06 20:58:12 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:58:11 | 2024-06-06 20:58:12 INFO calibrater::correct Beginning correct--------------------------- |
| 06-Jun-2024 16:58:11 | 2024-06-06 20:58:12 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 06-Jun-2024 16:58:11 | 2024-06-06 20:58:12 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:58:12 | 2024-06-06 20:58:12 INFO calibrater::correct Finished correcting. |
| 06-Jun-2024 16:58:12 | 2024-06-06 20:58:13 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 06-Jun-2024 16:58:13 | test_tool_calibrater.py::calibrater_test::test_selectVisScan |
| 06-Jun-2024 16:58:13 | Check tht the scan is properly selected by selectvis |
| 06-Jun-2024 16:58:13 | PASSED |
| 06-Jun-2024 16:58:13 | |
| 06-Jun-2024 16:58:14 | 2024-06-06 20:58:14 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 06-Jun-2024 16:58:14 | 2024-06-06 20:58:14 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:58:14 | 2024-06-06 20:58:14 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:58:14 | 2024-06-06 20:58:14 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:58:15 | 2024-06-06 20:58:16 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:58:16 | 2024-06-06 20:58:16 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:58:16 | 2024-06-06 20:58:16 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:58:16 | 2024-06-06 20:58:16 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 06-Jun-2024 16:58:16 | 2024-06-06 20:58:16 INFO calibrater::reset Reseting solve/apply state |
| 06-Jun-2024 16:58:16 | 2024-06-06 20:58:16 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 06-Jun-2024 16:58:16 | 2024-06-06 20:58:16 INFO Calibrater::selectvis+ Selecting on spw: '0' |
| 06-Jun-2024 16:58:16 | 2024-06-06 20:58:16 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
| 06-Jun-2024 16:58:16 | 2024-06-06 20:58:16 INFO Calibrater::selectvis Frequency selection: |
| 06-Jun-2024 16:58:16 | 2024-06-06 20:58:16 INFO Calibrater::selectvis . Spw 0:0~7 (8 channels, step by 1) |
| 06-Jun-2024 16:58:16 | 2024-06-06 20:58:16 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 06-Jun-2024 16:58:16 | 2024-06-06 20:58:16 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 06-Jun-2024 16:58:16 | 2024-06-06 20:58:16 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 06-Jun-2024 16:58:16 | 2024-06-06 20:58:16 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:58:16 | 2024-06-06 20:58:16 INFO calibrater::correct Beginning correct--------------------------- |
| 06-Jun-2024 16:58:16 | 2024-06-06 20:58:16 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 06-Jun-2024 16:58:16 | 2024-06-06 20:58:16 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:58:17 | 2024-06-06 20:58:17 INFO calibrater::correct Finished correcting. |
| 06-Jun-2024 16:58:18 | 2024-06-06 20:58:18 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 06-Jun-2024 16:58:18 | test_tool_calibrater.py::calibrater_test::test_selectVisSpw |
| 06-Jun-2024 16:58:18 | Check that spw is properly selected by selectvis |
| 06-Jun-2024 16:58:18 | PASSED |
| 06-Jun-2024 16:58:18 | |
| 06-Jun-2024 16:58:19 | 2024-06-06 20:58:19 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 06-Jun-2024 16:58:19 | 2024-06-06 20:58:19 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:58:19 | 2024-06-06 20:58:19 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:58:19 | 2024-06-06 20:58:19 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:58:21 | 2024-06-06 20:58:21 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:58:21 | 2024-06-06 20:58:22 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:58:21 | 2024-06-06 20:58:22 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:58:21 | 2024-06-06 20:58:22 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 06-Jun-2024 16:58:21 | 2024-06-06 20:58:22 INFO calibrater::reset Reseting solve/apply state |
| 06-Jun-2024 16:58:21 | 2024-06-06 20:58:22 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 06-Jun-2024 16:58:21 | 2024-06-06 20:58:22 INFO Calibrater::selectvis+ Selecting on time: '>04:38:23' |
| 06-Jun-2024 16:58:21 | 2024-06-06 20:58:22 INFO Calibrater::selectvis By selection 328860 rows are reduced to 313200 |
| 06-Jun-2024 16:58:21 | 2024-06-06 20:58:22 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 06-Jun-2024 16:58:21 | 2024-06-06 20:58:22 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 06-Jun-2024 16:58:21 | 2024-06-06 20:58:22 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 06-Jun-2024 16:58:21 | 2024-06-06 20:58:22 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 06-Jun-2024 16:58:21 | 2024-06-06 20:58:22 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:58:21 | 2024-06-06 20:58:22 INFO calibrater::correct Beginning correct--------------------------- |
| 06-Jun-2024 16:58:21 | 2024-06-06 20:58:22 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 06-Jun-2024 16:58:21 | 2024-06-06 20:58:22 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:58:24 | 2024-06-06 20:58:25 INFO calibrater::correct Finished correcting. |
| 06-Jun-2024 16:58:25 | 2024-06-06 20:58:25 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 06-Jun-2024 16:58:25 | test_tool_calibrater.py::calibrater_test::test_selectVisTime |
| 06-Jun-2024 16:58:25 | Check that time is properly selected by selectvis |
| 06-Jun-2024 16:58:25 | PASSED |
| 06-Jun-2024 16:58:25 | |
| 06-Jun-2024 16:58:26 | 2024-06-06 20:58:26 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 06-Jun-2024 16:58:26 | 2024-06-06 20:58:26 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:58:26 | 2024-06-06 20:58:26 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:58:26 | 2024-06-06 20:58:26 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:58:28 | 2024-06-06 20:58:28 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:58:28 | 2024-06-06 20:58:28 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:58:28 | 2024-06-06 20:58:28 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:58:28 | 2024-06-06 20:58:28 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 06-Jun-2024 16:58:28 | 2024-06-06 20:58:28 INFO calibrater::reset Reseting solve/apply state |
| 06-Jun-2024 16:58:28 | 2024-06-06 20:58:28 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 06-Jun-2024 16:58:28 | 2024-06-06 20:58:28 INFO Calibrater::selectvis+ Selecting on uvrange: '> 500000lambda' |
| 06-Jun-2024 16:58:29 | 2024-06-06 20:58:29 INFO Calibrater::selectvis By selection 328860 rows are reduced to 103321 |
| 06-Jun-2024 16:58:29 | 2024-06-06 20:58:29 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 06-Jun-2024 16:58:29 | 2024-06-06 20:58:29 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 06-Jun-2024 16:58:29 | 2024-06-06 20:58:29 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 06-Jun-2024 16:58:29 | 2024-06-06 20:58:29 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 06-Jun-2024 16:58:29 | 2024-06-06 20:58:29 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:58:29 | 2024-06-06 20:58:29 INFO calibrater::correct Beginning correct--------------------------- |
| 06-Jun-2024 16:58:29 | 2024-06-06 20:58:29 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 06-Jun-2024 16:58:29 | 2024-06-06 20:58:29 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:58:31 | 2024-06-06 20:58:31 INFO calibrater::correct Finished correcting. |
| 06-Jun-2024 16:58:32 | 2024-06-06 20:58:32 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 06-Jun-2024 16:58:32 | test_tool_calibrater.py::calibrater_test::test_selectVisUVrange |
| 06-Jun-2024 16:58:32 | Check that selectvis properly selects for uvrange |
| 06-Jun-2024 16:58:32 | PASSED |
| 06-Jun-2024 16:58:32 | |
| 06-Jun-2024 16:58:32 | 2024-06-06 20:58:33 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 06-Jun-2024 16:58:32 | 2024-06-06 20:58:33 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:58:32 | 2024-06-06 20:58:33 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:58:32 | 2024-06-06 20:58:33 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:58:34 | 2024-06-06 20:58:35 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:58:34 | 2024-06-06 20:58:35 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:58:34 | 2024-06-06 20:58:35 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:58:34 | 2024-06-06 20:58:35 INFO calibrater::parsecallibfile Beginning parsecallibfile-)------- |
| 06-Jun-2024 16:58:35 | 2024-06-06 20:58:35 INFO calibrater::setcallib Beginning setcallib--------- |
| 06-Jun-2024 16:58:35 | 2024-06-06 20:58:35 INFO Calibrater::setcallib2(callib) Arranging to APPLY: |
| 06-Jun-2024 16:58:35 | 2024-06-06 20:58:35 INFO . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 06-Jun-2024 16:58:35 | 2024-06-06 20:58:35 INFO . 0: |
| 06-Jun-2024 16:58:35 | 2024-06-06 20:58:35 INFO + MS: obs= scan= fld= intent= spw= |
| 06-Jun-2024 16:58:35 | 2024-06-06 20:58:35 INFO + CT: tinterp=linear finterp= |
| 06-Jun-2024 16:58:35 | 2024-06-06 20:58:35 INFO + obsmap=[] scanmap=[] fldmap=[] |
| 06-Jun-2024 16:58:35 | 2024-06-06 20:58:35 INFO + spwmap=[] antmap=[] |
| 06-Jun-2024 16:58:35 | 2024-06-06 20:58:35 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 06-Jun-2024 16:58:35 | 2024-06-06 20:58:35 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 06-Jun-2024 16:58:35 | 2024-06-06 20:58:35 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 06-Jun-2024 16:58:37 | 2024-06-06 20:58:38 INFO calibrater::corrupt Finished corrupting. |
| 06-Jun-2024 16:58:38 | 2024-06-06 20:58:38 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 06-Jun-2024 16:58:38 | test_tool_calibrater.py::calibrater_test::test_setCalLib |
| 06-Jun-2024 16:58:38 | Check that a provided cal table can be used to corrupt the MODEL_DATA |
| 06-Jun-2024 16:58:38 | PASSED |
| 06-Jun-2024 16:58:38 | |
| 06-Jun-2024 16:58:38 | 2024-06-06 20:58:39 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 06-Jun-2024 16:58:38 | 2024-06-06 20:58:39 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:58:38 | 2024-06-06 20:58:39 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:58:39 | 2024-06-06 20:58:39 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:58:40 | 2024-06-06 20:58:41 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:58:41 | 2024-06-06 20:58:41 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:58:41 | 2024-06-06 20:58:41 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:58:41 | 2024-06-06 20:58:41 INFO Calibrater::setCorrDepFlags Setting correlation dependent flags = True |
| 06-Jun-2024 16:58:41 | 2024-06-06 20:58:41 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 06-Jun-2024 16:58:41 | test_tool_calibrater.py::calibrater_test::test_setCorrDepFlags |
| 06-Jun-2024 16:58:41 | Check that corrdepflags will be checked |
| 06-Jun-2024 16:58:41 | PASSED |
| 06-Jun-2024 16:58:41 | |
| 06-Jun-2024 16:58:42 | 2024-06-06 20:58:42 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 06-Jun-2024 16:58:42 | 2024-06-06 20:58:42 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 06-Jun-2024 16:58:42 | 2024-06-06 20:58:42 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:58:42 | 2024-06-06 20:58:42 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:58:42 | 2024-06-06 20:58:42 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:58:42 | 2024-06-06 20:58:42 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 06-Jun-2024 16:58:42 | 2024-06-06 20:58:42 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:58:42 | 2024-06-06 20:58:42 INFO calibrater::smooth Beginning smooth--(MSSelection version)------- |
| 06-Jun-2024 16:58:42 | 2024-06-06 20:58:42 INFO Calibrater::smooth Beginning smoothing/interpolating method. |
| 06-Jun-2024 16:58:42 | 2024-06-06 20:58:42 WARN Found pre-v4.1 caltable (/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/ngc5921.gcal); attempting to update... |
| 06-Jun-2024 16:58:42 | 2024-06-06 20:58:42 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
| 06-Jun-2024 16:58:42 | 2024-06-06 20:58:43 INFO Calibrater::smooth Storing result in testcalout.cal |
| 06-Jun-2024 16:58:42 | 2024-06-06 20:58:43 INFO Writing solutions to table: testcalout.cal |
| 06-Jun-2024 16:58:42 | 2024-06-06 20:58:43 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 06-Jun-2024 16:58:42 | test_tool_calibrater.py::calibrater_test::test_smoothedCalTables |
| 06-Jun-2024 16:58:42 | Check that the smooth command creates a smoothed cal table |
| 06-Jun-2024 16:58:42 | PASSED |
| 06-Jun-2024 16:58:42 | |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:43 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:43 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:43 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:43 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:43 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO calibrater::setsolvebandpoly Beginning setsolvebandpoly--(MSSelection version)------- |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO Calibrater::setsolvebandpoly Arranging to SOLVE: |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO Calibrater::setsolvebandpoly . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO calibrater::solve Beginning solve----------------------------- |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO Calibrater::solve . (None) |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO Calibrater::solve . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO Calibrater::solve Solving for BPOLY |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO For solint = inf, found 7 solution intervals. |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.059507/0.0681762/0.0765806 |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.33653/0.750193/1.6779 |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0630839/0.0689061/0.0756384 |
| 06-Jun-2024 16:58:43 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.279482/0.74979/1.59355 |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0672607/0.089081/0.111106 |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.31075/3.32219/4.29305 |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0652822/0.0889198/0.116912 |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:44 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:45 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.44269/3.26616/4.3519 |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:45 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:45 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:45 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:45 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:45 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:45 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:45 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:45 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:45 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:45 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:45 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:45 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350681/0.587724/0.894558 |
| 06-Jun-2024 16:58:44 | 2024-06-06 20:58:45 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 06-Jun-2024 16:58:45 | 2024-06-06 20:58:46 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.296/59.0077/111.454 |
| 06-Jun-2024 16:58:45 | 2024-06-06 20:58:46 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 06-Jun-2024 16:58:45 | 2024-06-06 20:58:46 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.354236/0.581733/0.988903 |
| 06-Jun-2024 16:58:45 | 2024-06-06 20:58:46 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 17.2419/56.3249/117.264 |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0850169/0.113968/0.15276 |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.67561/5.33243/8.17296 |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0784237/0.114345/0.159908 |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.46392/5.27232/7.20673 |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0703936/0.102501/0.131676 |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:47 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.98728/4.47977/5.84264 |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0751114/0.102994/0.138529 |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.18629/4.47068/5.89411 |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350626/0.604424/0.974388 |
| 06-Jun-2024 16:58:47 | 2024-06-06 20:58:48 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 06-Jun-2024 16:58:49 | 2024-06-06 20:58:49 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.2542/59.3511/120.719 |
| 06-Jun-2024 16:58:49 | 2024-06-06 20:58:49 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 06-Jun-2024 16:58:49 | 2024-06-06 20:58:49 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.382806/0.598119/0.941571 |
| 06-Jun-2024 16:58:49 | 2024-06-06 20:58:49 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 20.0637/57.2112/118.101 |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0750931/0.0978998/0.125897 |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.72933/3.98787/5.33715 |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0658572/0.0972125/0.140794 |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:50 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:51 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.97943/3.97841/5.72903 |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:51 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:51 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:51 INFO Calibrater::solve Found good BPOLY solutions in 7 slots. |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:51 INFO calibrater::solve Finished solving. |
| 06-Jun-2024 16:58:50 | 2024-06-06 20:58:51 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 06-Jun-2024 16:58:50 | test_tool_calibrater.py::calibrater_test::test_solveBandpass |
| 06-Jun-2024 16:58:50 | Check that solve band poly creates the output table |
| 06-Jun-2024 16:58:50 | PASSED |
| 06-Jun-2024 16:58:50 | |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:51 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:51 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:51 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:51 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:51 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:52 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:52 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:52 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:52 INFO calibrater::setsolvegainspline Beginning setsolvegainspline--(MSSelection version)------- |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:52 INFO Calibrater::setsolvegainspline Arranging to SOLVE: |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:52 INFO Calibrater::setsolvegainspline . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:52 INFO calibrater::solve Beginning solve----------------------------- |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:52 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:52 INFO Calibrater::solve . (None) |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:52 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:52 INFO Calibrater::solve . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:52 INFO GJonesSpline::solve() Fitting time-dependent cubic splines. |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:52 INFO GJonesSpline::solve() Solving for phase splines with splinetime= 10800 |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:52 INFO GJonesSpline::solve() Solving for amplitude splines with splinetime= 10800 |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:52 INFO GJonesSpline::solve() Accumulating data for: field= 1331+30500002_0, spw= 0, nchan= 63 |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:52 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63 |
| 06-Jun-2024 16:58:51 | 2024-06-06 20:58:52 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63 |
| 06-Jun-2024 16:58:52 | 2024-06-06 20:58:52 INFO GJonesSpline::solve() Number of timestamps in data = 60 |
| 06-Jun-2024 16:58:52 | 2024-06-06 20:58:52 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec. |
| 06-Jun-2024 16:58:52 | 2024-06-06 20:58:52 INFO GJonesSpline::solve() Number of cubic spline control points = 4 |
| 06-Jun-2024 16:58:52 | 2024-06-06 20:58:52 INFO GJonesSpline::solve() Number of cubic spline knots = 8 |
| 06-Jun-2024 16:58:52 | 2024-06-06 20:58:52 INFO GJonesSpline::solve() Number of cubic spline segments = 1 |
| 06-Jun-2024 16:58:52 | 2024-06-06 20:58:52 INFO GJonesSpline::solve() Fitting amplitude spline. |
| 06-Jun-2024 16:58:52 | test_tool_calibrater.py::calibrater_test::test_solveGainspline DPBTRF ;problem leading minor 23 |
| 06-Jun-2024 16:58:52 | DPBTRF ;problem leading minor 23 |
| 06-Jun-2024 16:58:52 | 2024-06-06 20:58:52 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline. |
| 06-Jun-2024 16:58:52 | 2024-06-06 20:58:52 INFO GJonesSpline::solve() Fitting phase spline. |
| 06-Jun-2024 16:58:52 | DPBTRF ;problem leading minor 22 |
| 06-Jun-2024 16:58:52 | DPBTRF ;problem leading minor 22 |
| 06-Jun-2024 16:58:52 | 2024-06-06 20:58:52 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline |
| 06-Jun-2024 16:58:52 | 2024-06-06 20:58:52 INFO calibrater::solve Finished solving. |
| 06-Jun-2024 16:58:52 | 2024-06-06 20:58:52 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 06-Jun-2024 16:58:52 | |
| 06-Jun-2024 16:58:52 | Check that solve gain spline creates the output table |
| 06-Jun-2024 16:58:52 | PASSED |
| 06-Jun-2024 16:58:52 | |
| 06-Jun-2024 16:58:52 | 2024-06-06 20:58:53 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 06-Jun-2024 16:58:52 | 2024-06-06 20:58:53 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:58:52 | 2024-06-06 20:58:53 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:58:52 | 2024-06-06 20:58:53 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:58:54 | 2024-06-06 20:58:55 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:58:55 | 2024-06-06 20:58:55 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:58:55 | 2024-06-06 20:58:55 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:58:55 | 2024-06-06 20:58:55 INFO calibrater::specifycal Beginning specifycal----------------------- |
| 06-Jun-2024 16:58:55 | 2024-06-06 20:58:55 INFO Creating G Jones table from specified parameters. |
| 06-Jun-2024 16:58:55 | 2024-06-06 20:58:55 INFO Generating 'G' corrections. |
| 06-Jun-2024 16:58:55 | 2024-06-06 20:58:55 INFO Specified parameter(s) (per spw and pol) repeated on all antennas. |
| 06-Jun-2024 16:58:55 | 2024-06-06 20:58:55 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations. |
| 06-Jun-2024 16:58:55 | 2024-06-06 20:58:55 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9]) |
| 06-Jun-2024 16:58:55 | 2024-06-06 20:58:55 INFO Writing solutions to table: testcalout.cal |
| 06-Jun-2024 16:58:55 | 2024-06-06 20:58:55 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 06-Jun-2024 16:58:55 | test_tool_calibrater.py::calibrater_test::test_specifyCal |
| 06-Jun-2024 16:58:55 | Check that specifycal can set values for specific spws and antennas |
| 06-Jun-2024 16:58:55 | PASSED |
| 06-Jun-2024 16:58:55 | |
| 06-Jun-2024 16:58:56 | 2024-06-06 20:58:56 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 06-Jun-2024 16:58:56 | 2024-06-06 20:58:56 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 06-Jun-2024 16:58:56 | 2024-06-06 20:58:56 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:58:56 | 2024-06-06 20:58:56 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:58:56 | 2024-06-06 20:58:56 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:58 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:58 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:58 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:58 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:58 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:59 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:59 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:59 INFO Calibrater::setsolve Arranging to SOLVE: |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:59 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:59 INFO Calibrater::state The following calibration terms are arranged for apply: |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:59 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:59 INFO Calibrater::state The following calibration term is arranged for solve: |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:59 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:59 INFO calibrater::solve Beginning solve----------------------------- |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:59 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:59 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:59 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:59 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:59 INFO Solving for Mf Mueller |
| 06-Jun-2024 16:58:58 | 2024-06-06 20:58:59 INFO For solint = inf, found 84 solution intervals. |
| 06-Jun-2024 16:59:00 | 2024-06-06 20:59:01 INFO Found good Mf Mueller solutions in 84 intervals. |
| 06-Jun-2024 16:59:00 | 2024-06-06 20:59:01 INFO Writing solutions to table: output.ms |
| 06-Jun-2024 16:59:00 | 2024-06-06 20:59:01 INFO calibrater::solve Finished solving. |
| 06-Jun-2024 16:59:00 | 2024-06-06 20:59:01 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 06-Jun-2024 16:59:00 | test_tool_calibrater.py::calibrater_test::test_standardPath |
| 06-Jun-2024 16:59:00 | open setapply setsolve state solve close |
| 06-Jun-2024 16:59:00 | PASSED |
| 06-Jun-2024 16:59:00 | |
| 06-Jun-2024 16:59:01 | 2024-06-06 20:59:02 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 06-Jun-2024 16:59:01 | 2024-06-06 20:59:02 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:59:01 | 2024-06-06 20:59:02 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:59:01 | 2024-06-06 20:59:02 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:03 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO name:: No table opened. |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO showcache:: The Table Cache has the following 16 entries: |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO showcache:: 0: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO showcache:: 1: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO showcache:: 2: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO showcache:: 3: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO showcache:: 4: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO showcache:: 5: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO showcache:: 6: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO showcache:: 7: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO showcache:: 8: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO showcache:: 9: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO showcache:: 10: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO showcache:: 11: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO showcache:: 12: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO showcache:: 13: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO showcache:: 14: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 06-Jun-2024 16:59:03 | 2024-06-06 20:59:04 INFO showcache:: 15: "/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 06-Jun-2024 16:59:04 | 2024-06-06 20:59:04 INFO name:: No table opened. |
| 06-Jun-2024 16:59:04 | 2024-06-06 20:59:04 INFO showcache:: The Table Cache is empty. |
| 06-Jun-2024 16:59:04 | 2024-06-06 20:59:04 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 06-Jun-2024 16:59:04 | test_tool_calibrater.py::calibrater_test::test_takesMs |
| 06-Jun-2024 16:59:04 | Check that the calibrater tool can open and close an MS |
| 06-Jun-2024 16:59:04 | PASSED |
| 06-Jun-2024 16:59:04 | |
| 06-Jun-2024 16:59:04 | 2024-06-06 20:59:05 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 06-Jun-2024 16:59:04 | 2024-06-06 20:59:05 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 06-Jun-2024 16:59:04 | 2024-06-06 20:59:05 INFO Clearing all model records in MS header. |
| 06-Jun-2024 16:59:04 | 2024-06-06 20:59:05 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 06-Jun-2024 16:59:06 | 2024-06-06 20:59:07 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 06-Jun-2024 16:59:06 | 2024-06-06 20:59:07 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 06-Jun-2024 16:59:06 | 2024-06-06 20:59:07 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 06-Jun-2024 16:59:06 | 2024-06-06 20:59:07 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 06-Jun-2024 16:59:06 | 2024-06-06 20:59:07 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 06-Jun-2024 16:59:07 | 2024-06-06 20:59:07 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:59:07 | 2024-06-06 20:59:07 INFO calibrater::correct Beginning correct--------------------------- |
| 06-Jun-2024 16:59:07 | 2024-06-06 20:59:07 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 06-Jun-2024 16:59:07 | 2024-06-06 20:59:07 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 06-Jun-2024 16:59:10 | 2024-06-06 20:59:10 INFO calibrater::correct Finished correcting. |
| 06-Jun-2024 16:59:10 | 2024-06-06 20:59:10 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 06-Jun-2024 16:59:10 | test_tool_calibrater.py::calibrater_test::test_writeToCorrected |
| 06-Jun-2024 16:59:10 | Check that the tool writes to the CORRECTED_DATA column |
| 06-Jun-2024 16:59:10 | PASSED |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | - generated xml file: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml - |
| 06-Jun-2024 16:59:10 | ================== 24 passed, 1 warning in 125.44s (0:02:05) =================== |
| 06-Jun-2024 16:59:10 | HAVE_PYTEST: True |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Namespace(bamboo=False, branch='CAS-14360', classes=None, dry_run=False, file=None, ignore_list=None, list=False, mapfile=<_io.TextIOWrapper name='./casatestutils/component_to_test_map.json' mode='r' encoding='UTF-8'>, merge_target=None, ncores=2, pkg=None, pmode=None, rcdir=None, test_config=None, test_group='casatools', test_list=None, test_paths=None, verbose=False, work_dir=None) |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Operating system: Darwin |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Testing Components['casatools'] |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Arguments Sent Direct To Pytest : [] |
| 06-Jun-2024 16:59:10 | Running 32 Test(s) |
| 06-Jun-2024 16:59:10 | Cleaning: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/ |
| 06-Jun-2024 16:59:10 | Tests: ['test_tool_agentflagger', 'test_tool_calanalysis', 'test_tool_calibrater', 'test_tool_componentlist', 'test_tool_coordsys', 'test_tool_image', 'test_tool_image_collapse', 'test_tool_image_deviation', 'test_tool_image_fitprofile', 'test_tool_image_pbcor', 'test_tool_image_pv', 'test_tool_image_rebin', 'test_tool_image_regrid', 'test_tool_image_statistics', 'test_tool_image_subimage', 'test_tool_image_transpose', 'test_tool_imagepol', 'test_tool_linearmosaic', 'test_tool_logsink', 'test_tool_measures', 'test_tool_ms', 'test_tool_ms_createmultims', 'test_tool_ms_statwt', 'test_tool_msmetadata', 'test_tool_msuvbinner', 'test_tool_quanta', 'test_tool_regionmanager', 'test_tool_sdm', 'test_tool_sdm_toms', 'test_tool_simulator', 'test_tool_table', 'test_tool_vpmanager'] |
| 06-Jun-2024 16:59:10 | Fetching Repository: casa6 |
| 06-Jun-2024 16:59:10 | Running: git clone https://open-bitbucket.nrao.edu/scm/casa/casa6 |
| 06-Jun-2024 16:59:10 | Running: git checkout origin/CAS-14360 |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Fetching Repository: casampi |
| 06-Jun-2024 16:59:10 | Running: git clone https://open-bitbucket.nrao.edu/scm/casa/casampi |
| 06-Jun-2024 16:59:10 | Tag: tags/0.5.4 |
| 06-Jun-2024 16:59:10 | Running: git checkout tags/0.5.4 |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Fetching Repository: casaplotms |
| 06-Jun-2024 16:59:10 | Running: git clone https://open-bitbucket.nrao.edu/scm/casa/casaplotms |
| 06-Jun-2024 16:59:10 | Tag: tags/2.2.5 |
| 06-Jun-2024 16:59:10 | Running: git checkout tags/2.2.5 |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Fetching Repository: almatasks |
| 06-Jun-2024 16:59:10 | Running: git clone https://open-bitbucket.nrao.edu/scm/casa/almatasks |
| 06-Jun-2024 16:59:10 | Tag: tags/1.7.1 |
| 06-Jun-2024 16:59:10 | Running: git checkout tags/1.7.1 |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Fetching Repository: casaviewer |
| 06-Jun-2024 16:59:10 | Running: git clone https://open-bitbucket.nrao.edu/scm/casa/casaviewer |
| 06-Jun-2024 16:59:10 | Tag: tags/1.9.1 |
| 06-Jun-2024 16:59:10 | Running: git checkout tags/1.9.1 |
| 06-Jun-2024 16:59:10 | Directory Of Tests: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/tests/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_regrid |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_image_regrid/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_collapse/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_collapse |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_image_collapse/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_collapse/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_linearmosaic |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_linearmosaic/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_linearmosaic/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_statistics/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_statistics |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_image_statistics/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_statistics/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_sdm |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_sdm/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_agentflagger |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_agentflagger/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_coordsys/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_coordsys |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_coordsys/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_coordsys/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_vpmanager |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_vpmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_deviation |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_image_deviation/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_msuvbinner |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_msuvbinner/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_ms/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_ms |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_ms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_ms/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_table/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_table |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_table/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_table/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_rebin |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_image_rebin/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_logsink/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_logsink |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_logsink/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_logsink/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_subimage/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_subimage |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_image_subimage/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_subimage/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_sdm_toms/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_sdm_toms |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_sdm_toms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_sdm_toms/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_measures/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_measures |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_measures/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_measures/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_regionmanager/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_regionmanager |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_regionmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_regionmanager/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_componentlist |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_componentlist/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_simulator/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_simulator |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_simulator/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_simulator/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_quanta/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_quanta |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_quanta/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_quanta/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_fitprofile |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_image_fitprofile/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_ms_createmultims |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_ms_createmultims/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_image/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_ms_statwt |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_ms_statwt/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_transpose |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_image_transpose/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_pv |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_image_pv/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calanalysis/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calanalysis |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_calanalysis/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calanalysis/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_msmetadata |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_msmetadata/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_imagepol |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_pbcor |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_image_pbcor/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Setting Working Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 06-Jun-2024 16:59:10 | Test Directory: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater |
| 06-Jun-2024 16:59:10 | |
| 06-Jun-2024 16:59:10 | Running Command: pytest --junitxml=/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 06-Jun-2024 16:59:10 | Finished task 'Test wheel' with result: Success |
| 06-Jun-2024 16:59:10 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
| 06-Jun-2024 16:59:10 | Parsing test results under /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1... |
| 06-Jun-2024 16:59:11 | Finished task 'Parse tests' with result: Success |
| 06-Jun-2024 16:59:11 | Starting task 'Script' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
| 06-Jun-2024 16:59:11 | Beginning to execute external process for build 'CASA - CMake Dev Test Full - CAS-14360 - Test Tools Macos 12 #3 (CASA-CMDTF133-TTM1-3)' ... running command line: /Volumes/T7/bamboohome/temp/CASA-CMDTF133-TTM1-3-ScriptBuildTask-881350853927217443.sh ... in: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1 |
| 06-Jun-2024 16:59:11 | Cloning into 'casa-build-utils'... |
| 06-Jun-2024 16:59:12 | /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1 |
| 06-Jun-2024 16:59:18 | Looking in indexes: https://casa-pip.nrao.edu/repository/pypi-group/simple, https://pypi.org/simple |
| 06-Jun-2024 16:59:18 | Collecting twine |
| 06-Jun-2024 16:59:18 | Using cached twine-5.1.0-py3-none-any.whl (38 kB) |
| 06-Jun-2024 16:59:18 | Collecting pkginfo>=1.8.1 |
| 06-Jun-2024 16:59:18 | Using cached pkginfo-1.11.0-py3-none-any.whl (31 kB) |
| 06-Jun-2024 16:59:19 | Collecting requests-toolbelt!=0.9.0,>=0.8.0 |
| 06-Jun-2024 16:59:19 | Using cached requests_toolbelt-1.0.0-py2.py3-none-any.whl (54 kB) |
| 06-Jun-2024 16:59:19 | Collecting keyring>=15.1 |
| 06-Jun-2024 16:59:19 | Using cached keyring-25.2.1-py3-none-any.whl (38 kB) |
| 06-Jun-2024 16:59:19 | Collecting rfc3986>=1.4.0 |
| 06-Jun-2024 16:59:19 | Using cached rfc3986-2.0.0-py2.py3-none-any.whl (31 kB) |
| 06-Jun-2024 16:59:19 | Collecting rich>=12.0.0 |
| 06-Jun-2024 16:59:19 | Using cached rich-13.7.1-py3-none-any.whl (240 kB) |
| 06-Jun-2024 16:59:20 | Collecting urllib3>=1.26.0 |
| 06-Jun-2024 16:59:20 | Using cached urllib3-2.2.1-py3-none-any.whl (121 kB) |
| 06-Jun-2024 16:59:20 | Collecting readme-renderer>=35.0 |
| 06-Jun-2024 16:59:20 | Using cached readme_renderer-43.0-py3-none-any.whl (13 kB) |
| 06-Jun-2024 16:59:20 | Collecting requests>=2.20 |
| 06-Jun-2024 16:59:20 | Using cached requests-2.32.3-py3-none-any.whl (64 kB) |
| 06-Jun-2024 16:59:20 | Collecting importlib-metadata>=3.6 |
| 06-Jun-2024 16:59:20 | Using cached importlib_metadata-7.1.0-py3-none-any.whl (24 kB) |
| 06-Jun-2024 16:59:20 | Collecting zipp>=0.5 |
| 06-Jun-2024 16:59:20 | Using cached zipp-3.19.2-py3-none-any.whl (9.0 kB) |
| 06-Jun-2024 16:59:20 | Collecting jaraco.functools |
| 06-Jun-2024 16:59:20 | Using cached jaraco.functools-4.0.1-py3-none-any.whl (9.8 kB) |
| 06-Jun-2024 16:59:21 | Collecting jaraco.classes |
| 06-Jun-2024 16:59:21 | Using cached jaraco.classes-3.4.0-py3-none-any.whl (6.8 kB) |
| 06-Jun-2024 16:59:21 | Collecting importlib-resources |
| 06-Jun-2024 16:59:21 | Using cached importlib_resources-6.4.0-py3-none-any.whl (38 kB) |
| 06-Jun-2024 16:59:21 | Collecting jaraco.context |
| 06-Jun-2024 16:59:21 | Using cached jaraco.context-5.3.0-py3-none-any.whl (6.5 kB) |
| 06-Jun-2024 16:59:21 | Collecting Pygments>=2.5.1 |
| 06-Jun-2024 16:59:21 | Using cached pygments-2.18.0-py3-none-any.whl (1.2 MB) |
| 06-Jun-2024 16:59:21 | Collecting nh3>=0.2.14 |
| 06-Jun-2024 16:59:21 | Using cached nh3-0.2.17-cp37-abi3-macosx_10_12_x86_64.whl (683 kB) |
| 06-Jun-2024 16:59:21 | Collecting docutils>=0.13.1 |
| 06-Jun-2024 16:59:21 | Using cached docutils-0.20.1-py3-none-any.whl (572 kB) |
| 06-Jun-2024 16:59:22 | Collecting charset-normalizer<4,>=2 |
| 06-Jun-2024 16:59:22 | Using cached charset_normalizer-3.3.2-cp38-cp38-macosx_10_9_x86_64.whl (121 kB) |
| 06-Jun-2024 16:59:22 | Collecting idna<4,>=2.5 |
| 06-Jun-2024 16:59:22 | Using cached idna-3.7-py3-none-any.whl (66 kB) |
| 06-Jun-2024 16:59:22 | Collecting certifi>=2017.4.17 |
| 06-Jun-2024 16:59:22 | Using cached certifi-2024.6.2-py3-none-any.whl (164 kB) |
| 06-Jun-2024 16:59:22 | Collecting typing-extensions<5.0,>=4.0.0 |
| 06-Jun-2024 16:59:22 | Using cached typing_extensions-4.12.1-py3-none-any.whl (37 kB) |
| 06-Jun-2024 16:59:22 | Collecting markdown-it-py>=2.2.0 |
| 06-Jun-2024 16:59:22 | Using cached markdown_it_py-3.0.0-py3-none-any.whl (87 kB) |
| 06-Jun-2024 16:59:22 | Collecting mdurl~=0.1 |
| 06-Jun-2024 16:59:22 | Using cached mdurl-0.1.2-py3-none-any.whl (10.0 kB) |
| 06-Jun-2024 16:59:23 | Collecting more-itertools |
| 06-Jun-2024 16:59:23 | Using cached more_itertools-10.2.0-py3-none-any.whl (57 kB) |
| 06-Jun-2024 16:59:23 | Collecting backports.tarfile |
| 06-Jun-2024 16:59:23 | Using cached backports.tarfile-1.2.0-py3-none-any.whl (30 kB) |
| 06-Jun-2024 16:59:23 | Installing collected packages: nh3, zipp, urllib3, typing-extensions, rfc3986, Pygments, pkginfo, more-itertools, mdurl, idna, docutils, charset-normalizer, certifi, backports.tarfile, requests, readme-renderer, markdown-it-py, jaraco.functools, jaraco.context, jaraco.classes, importlib-resources, importlib-metadata, rich, requests-toolbelt, keyring, twine |
| 06-Jun-2024 16:59:27 | Successfully installed Pygments-2.18.0 backports.tarfile-1.2.0 certifi-2024.6.2 charset-normalizer-3.3.2 docutils-0.20.1 idna-3.7 importlib-metadata-7.1.0 importlib-resources-6.4.0 jaraco.classes-3.4.0 jaraco.context-5.3.0 jaraco.functools-4.0.1 keyring-25.2.1 markdown-it-py-3.0.0 mdurl-0.1.2 more-itertools-10.2.0 nh3-0.2.17 pkginfo-1.11.0 readme-renderer-43.0 requests-2.32.3 requests-toolbelt-1.0.0 rfc3986-2.0.0 rich-13.7.1 twine-5.1.0 typing-extensions-4.12.1 urllib3-2.2.1 zipp-3.19.2 |
| 06-Jun-2024 16:59:27 | WARNING: You are using pip version 22.0.4; however, version 24.0 is available. |
| 06-Jun-2024 16:59:27 | You should consider upgrading via the '/Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1/wheeldirectory/casa6testenv/bin/python3 -m pip install --upgrade pip' command. |
| 06-Jun-2024 16:59:28 | Uploading distributions to |
| 06-Jun-2024 16:59:28 | https://casa-pip.nrao.edu:443/repository/casa-dev-wheel/ |
| 06-Jun-2024 16:59:28 | Uploading casatools-6.6.1.14a14360.dev2-cp38-cp38-macosx_12_0_x86_64.whl |
| 06-Jun-2024 16:59:28 | |
| 06-Jun-2024 16:59:28 | 0% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 0.0/75.9 MB • --:-- • ? |
| 06-Jun-2024 16:59:28 | 8% ━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 5.8/75.9 MB • 00:01 • 85.1 MB/s |
| 06-Jun-2024 16:59:29 | 18% ━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 13.7/75.9 MB • 00:01 • 79.1 MB/s |
| 06-Jun-2024 16:59:29 | 27% ━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 20.3/75.9 MB • 00:01 • 81.6 MB/s |
| 06-Jun-2024 16:59:29 | 30% ━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 22.7/75.9 MB • 00:02 • 51.9 MB/s |
| 06-Jun-2024 16:59:29 | 33% ━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━ 25.2/75.9 MB • 00:01 • 51.4 MB/s |
| 06-Jun-2024 16:59:29 | 40% ━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━ 30.5/75.9 MB • 00:02 • 38.7 MB/s |
| 06-Jun-2024 16:59:29 | 41% ━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━ 30.7/75.9 MB • 00:02 • 32.7 MB/s |
| 06-Jun-2024 16:59:29 | 46% ━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━ 35.0/75.9 MB • 00:02 • 28.0 MB/s |
| 06-Jun-2024 16:59:29 | 49% ━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━ 37.4/75.9 MB • 00:02 • 29.8 MB/s |
| 06-Jun-2024 16:59:29 | 54% ━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━ 41.0/75.9 MB • 00:02 • 30.7 MB/s |
| 06-Jun-2024 16:59:30 | 60% ━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━ 45.4/75.9 MB • 00:02 • 30.2 MB/s |
| 06-Jun-2024 16:59:30 | 60% ━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━ 45.5/75.9 MB • 00:02 • 26.4 MB/s |
| 06-Jun-2024 16:59:30 | 68% ━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━ 51.3/75.9 MB • 00:01 • 30.4 MB/s |
| 06-Jun-2024 16:59:30 | 71% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━ 53.5/75.9 MB • 00:01 • 30.6 MB/s |
| 06-Jun-2024 16:59:30 | 74% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━ 56.1/75.9 MB • 00:01 • 26.4 MB/s |
| 06-Jun-2024 16:59:30 | 78% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━ 59.3/75.9 MB • 00:01 • 30.2 MB/s |
| 06-Jun-2024 16:59:30 | 82% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━ 62.4/75.9 MB • 00:01 • 30.6 MB/s |
| 06-Jun-2024 16:59:30 | 83% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━ 63.2/75.9 MB • 00:01 • 26.6 MB/s |
| 06-Jun-2024 16:59:30 | 88% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━ 67.0/75.9 MB • 00:01 • 24.7 MB/s |
| 06-Jun-2024 16:59:30 | 90% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━ 68.4/75.9 MB • 00:01 • 24.7 MB/s |
| 06-Jun-2024 16:59:31 | 94% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━ 71.1/75.9 MB • 00:01 • 23.3 MB/s |
| 06-Jun-2024 16:59:31 | 99% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸ 75.0/75.9 MB • 00:01 • 24.7 MB/s |
| 06-Jun-2024 16:59:31 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸ 75.5/75.9 MB • 00:01 • 20.9 MB/s |
| 06-Jun-2024 16:59:31 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 75.9/75.9 MB • 00:02 • 24.7 MB/s |
| 06-Jun-2024 16:59:31 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 75.9/75.9 MB • 00:02 • 24.7 MB/s |
| 06-Jun-2024 16:59:31 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 75.9/75.9 MB • 00:02 • 24.7 MB/s |
| 06-Jun-2024 16:59:31 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 75.9/75.9 MB • 00:02 • 24.7 MB/s |
| 06-Jun-2024 16:59:31 | WARNING Error during upload. Retry with the --verbose option for more details. |
| 06-Jun-2024 16:59:31 | ERROR HTTPError: 400 Bad Request from |
| 06-Jun-2024 16:59:31 | https://casa-pip.nrao.edu:443/repository/casa-dev-wheel/ |
| 06-Jun-2024 16:59:31 | Repository does not allow updating assets: casa-dev-wheel |
| 06-Jun-2024 16:59:31 | /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1 |
| 06-Jun-2024 16:59:31 | Finished task 'Script' with result: Success |
| 06-Jun-2024 16:59:31 | Starting task 'Reset config.py' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
| 06-Jun-2024 16:59:31 | Beginning to execute external process for build 'CASA - CMake Dev Test Full - CAS-14360 - Test Tools Macos 12 #3 (CASA-CMDTF133-TTM1-3)' ... running command line: /Volumes/T7/bamboohome/temp/CASA-CMDTF133-TTM1-3-ScriptBuildTask-8810506947365671292.sh ... in: /Volumes/T7/bamboohome/xml-data/build-dir/CASA-CMDTF133-TTM1 |
| 06-Jun-2024 16:59:31 | % Total % Received % Xferd Average Speed Time Time Time Current |
| 06-Jun-2024 16:59:31 | Dload Upload Total Spent Left Speed |
| 06-Jun-2024 16:59:31 | |
| 06-Jun-2024 16:59:31 | 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 |
| 06-Jun-2024 16:59:31 | 100 201 100 201 0 0 2262 0 --:--:-- --:--:-- --:--:-- 2421 |
| 06-Jun-2024 16:59:31 | Finished task 'Reset config.py' with result: Success |
| 06-Jun-2024 16:59:31 | Running post build plugin 'Docker Container Cleanup' |
| 06-Jun-2024 16:59:31 | Running post build plugin 'NCover Results Collector' |
| 06-Jun-2024 16:59:31 | Running post build plugin 'Build Results Label Collector' |
| 06-Jun-2024 16:59:31 | Running post build plugin 'Clover Results Collector' |
| 06-Jun-2024 16:59:31 | Running post build plugin 'npm Cache Cleanup' |
| 06-Jun-2024 16:59:31 | Running post build plugin 'Artifact Copier' |
| 06-Jun-2024 16:59:31 | Publishing an artifact: OSX12 casatools wheel |
| 06-Jun-2024 16:59:37 | Finished publishing of artifact Required job artifact Http Compression On : [OSX12 casatools wheel], patterns: [casatools*.whl] anchored at: [wheeldirectory/] in 5.593 s |
| 06-Jun-2024 16:59:37 | Finalising the build... |
| 06-Jun-2024 16:59:37 | Stopping timer. |
| 06-Jun-2024 16:59:37 | Build CASA-CMDTF133-TTM1-3 completed. |
| 06-Jun-2024 16:59:37 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
| 06-Jun-2024 16:59:37 | Running on server: post build plugin 'NCover Results Collector' |
| 06-Jun-2024 16:59:37 | Running on server: post build plugin 'Build Labeller' |
| 06-Jun-2024 16:59:37 | Running on server: post build plugin 'Clover Delta Calculator' |
| 06-Jun-2024 16:59:37 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
| 06-Jun-2024 16:59:37 | All post build plugins have finished |
| 06-Jun-2024 16:59:37 | Generating build results summary... |
| 06-Jun-2024 16:59:38 | Saving build results to disk... |
| 06-Jun-2024 16:59:38 | Store variable context... |
| 06-Jun-2024 16:59:38 | Finished building CASA-CMDTF133-TTM1-3. |