fatal: could not read Username for 'https://open-bitbucket.nrao.edu': No such device or address
Error response from daemon: No such container: wheel-container-test
Error response from daemon: No such container: wheel-container-test
2026-06-19 07:37:56        INFO        MSFitsInput::fillMSMainTableColWise        Reading and writing 630 visibility groups
2026-06-19 07:37:56        INFO        MSFitsInput::readRandomGroupUVFits        extname=AIPS FQ  nrows=2 ncols=5 rowsize=24 pcount=0 gcount=1
2026-06-19 07:37:56        INFO        MSFitsInput::readRandomGroupUVFits        extname=AIPS AN  nrows=8 ncols=13 rowsize=66 pcount=0 gcount=1
2026-06-19 07:37:56        INFO        MSFitsInput::fillExtraTables        Filling SOURCE table (this may take some time).
2026-06-19 07:37:56        WARN        MSFitsInput::fillExtraTable        No systemic velocity for field 0
2026-06-19 07:37:56        WARN        MSFitsInput::fillExtraTable        No rest frequency for field 0
2026-06-19 07:37:56        WARN        MSFitsInput::fillExtraTable        No systemic velocity for field 0
2026-06-19 07:37:56        WARN        MSFitsInput::fillExtraTable        No rest frequency for field 0
2026-06-19 07:37:57        INFO        MSFitsInput::MSFitsInput        Converting FITS file '/opt/casa/data/casatestdata/unittest/mstool/1331+305_I.UVFITS' to MeasurementSet 'my.ms'
2026-06-19 07:37:57        SEVERE        ms::fromfits        Stokes I cannot be decomposed into proper correlation types without making assumptions. This functionality is not supported at File: /source/casa6/casatools/casacore/msfits/MSFits/MSFitsInput.cc, line: 744 at File: /source/casa6/casatools/casacore/msfits/MSFits/MSFitsInput.cc, line: 597
2026-06-19 07:37:58        WARN        componentlist::close        componentlist closed
2026-06-19 07:37:58        WARN        componentlist::close        componentlist closed
2026-06-19 07:37:58        INFO        componentlist::summarize        SUMMARY OF COMPONENT
2026-06-19 07:37:58        INFO        componentlist::summarize+        Shape: Gaussian
2026-06-19 07:37:58        INFO        componentlist::summarize+        Flux density: [(1,0), (0,0), (0,0), (0,0)] Jy +/- [(0,0), (0,0), (0,0), (0,0)]
2026-06-19 07:37:58        INFO        componentlist::summarize+        Spectral model: Constant
2026-06-19 07:37:58        INFO        componentlist::summarize+        Position: Position ---
2026-06-19 07:37:58        INFO        componentlist::summarize+               --- long:   10:30:00.000 (fixed)
2026-06-19 07:37:58        INFO        componentlist::summarize+               --- lat:  - 20.00.00.00 (fixed)
2026-06-19 07:37:58        INFO        componentlist::summarize+        
2026-06-19 07:37:58        INFO        componentlist::summarize+        Size:
2026-06-19 07:37:58        INFO        componentlist::summarize+               --- major axis FWHM:     4.00 arcsec (fixed)
2026-06-19 07:37:58        INFO        componentlist::summarize+               --- minor axis FWHM:     2.00 arcsec (fixed)
2026-06-19 07:37:58        INFO        componentlist::summarize+               --- position angle: 30.0deg (fixed)
2026-06-19 07:37:58        SEVERE        componentlist::summarize        Exception Reported: List has only 1 components, but zero-based component 1 specified. Please specify a component less than 1
2026-06-19 07:37:58        SEVERE        componentlist::putkeyword        Exception Reported: Exception: A table is not attached to this ComponentList.
2026-06-19 07:37:58        SEVERE        componentlist::putkeyword+        ... thrown by void casa::ComponentList::putKeyword(const casacore::String&, const casac::variant&) at File: /source/casa6/casatools/src/code/components/ComponentModels/ComponentList.cc, line: 1238
2026-06-19 07:37:58        SEVERE        componentlist::getkeyword        Exception Reported: Exception: A table is not attached to this ComponentList.
2026-06-19 07:37:58        SEVERE        componentlist::getkeyword+        ... thrown by casac::variant* casa::ComponentList::getKeyword(const casacore::String&) const at File: /source/casa6/casatools/src/code/components/ComponentModels/ComponentList.cc, line: 1248
2026-06-19 07:37:58        SEVERE        componentlist::haskeyword        Exception Reported: Exception: A table is not attached to this ComponentList.
2026-06-19 07:37:58        SEVERE        componentlist::haskeyword+        ... thrown by bool casa::ComponentList::hasKeyword(const casacore::String&) const at File: /source/casa6/casatools/src/code/components/ComponentModels/ComponentList.cc, line: 1233
2026-06-19 07:37:58        SEVERE        componentlist::putkeyword        Exception Reported: Exception: A table is not attached to this ComponentList.
2026-06-19 07:37:58        SEVERE        componentlist::putkeyword+        ... thrown by void casa::ComponentList::putKeyword(const casacore::String&, const casac::variant&) at File: /source/casa6/casatools/src/code/components/ComponentModels/ComponentList.cc, line: 1238
2026-06-19 07:37:58        SEVERE        componentlist::getkeyword        Exception Reported: Exception: A table is not attached to this ComponentList.
2026-06-19 07:37:58        SEVERE        componentlist::getkeyword+        ... thrown by casac::variant* casa::ComponentList::getKeyword(const casacore::String&) const at File: /source/casa6/casatools/src/code/components/ComponentModels/ComponentList.cc, line: 1248
2026-06-19 07:37:58        SEVERE        componentlist::haskeyword        Exception Reported: Exception: A table is not attached to this ComponentList.
2026-06-19 07:37:58        SEVERE        componentlist::haskeyword+        ... thrown by bool casa::ComponentList::hasKeyword(const casacore::String&) const at File: /source/casa6/casatools/src/code/components/ComponentModels/ComponentList.cc, line: 1233
2026-06-19 07:38:00        INFO        SubImageFactory::createImage        Creating image 'blahxx.im' of shape [1536, 1536, 1, 2]
2026-06-19 07:38:00        INFO        name::        No table opened.
2026-06-19 07:38:00        INFO        showcache::        The Table Cache is empty.
2026-06-19 07:38:00        INFO        name::        No table opened.
2026-06-19 07:38:00        INFO        showcache::        The Table Cache is empty.
2026-06-19 07:38:00        SEVERE        image::open (file src/tools/image/image_cmpt.cc, line 4208)        Exception Reported: Exception: File name is empty.
2026-06-19 07:38:00        SEVERE        image::open (file src/tools/image/image_cmpt.cc, line 4208)+        ... thrown by static void casa::ImageFactory::_checkInfile(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 371
2026-06-19 07:38:00        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2026-06-19 07:38:00        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-06-19 07:38:00        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2026-06-19 07:38:00        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2026-06-19 07:38:00        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-06-19 07:38:00        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2026-06-19 07:38:00        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2026-06-19 07:38:00        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-06-19 07:38:00        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2026-06-19 07:38:00        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-06-19 07:38:00        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-06-19 07:38:00        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-06-19 07:38:00        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2026-06-19 07:38:00        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-06-19 07:38:00        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2026-06-19 07:38:00        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2026-06-19 07:38:00        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-06-19 07:38:00        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2026-06-19 07:38:00        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-06-19 07:38:00        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-06-19 07:38:00        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-06-19 07:38:00        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2026-06-19 07:38:00        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-06-19 07:38:00        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2026-06-19 07:38:00        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Ambiguous axis specification. Both r and r match image axis name right ascension
2026-06-19 07:38:00        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-06-19 07:38:00        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4663)        Ambiguous axis specification. Both r and r match image axis name right ascension
2026-06-19 07:38:00        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-06-19 07:38:00        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2026-06-19 07:38:00        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2026-06-19 07:38:00        INFO        name::        No table opened.
2026-06-19 07:38:00        INFO        showcache::        The Table Cache is empty.
2026-06-19 07:38:00        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2026-06-19 07:38:00        INFO        ::::ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2026-06-19 07:38:00        INFO        ::::image::fromshape        Ran ia.fromshape
2026-06-19 07:38:00        INFO        ::::image::fromshape        ia.fromshape(outfile="", shape=[10,10,4,10], csys={...}, linear=false, overwrite=false, log=true, type="f")
2026-06-19 07:38:00        INFO        ::::image::transpose        Ran ia.transpose
2026-06-19 07:38:00        INFO        ::::image::transpose        ia.transpose(outfile="", order="3210")
2026-06-19 07:38:00        INFO        name::        No table opened.
2026-06-19 07:38:00        INFO        showcache::        The Table Cache is empty.
2026-06-19 07:38:00        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 20, 30] with float valued pixels.
2026-06-19 07:38:00        INFO        image::_casaQuantityFromVar         Will use values specified in major, minor, pa to set beam
2026-06-19 07:38:00        INFO        BeamManipulator::set        Setting (global) restoring beam.
2026-06-19 07:38:00        INFO        BeamManipulator::set        Beam parameters:  Major          : 4 arcmin
2026-06-19 07:38:00        INFO        BeamManipulator::set+          Minor          : 3 arcmin
2026-06-19 07:38:00        INFO        BeamManipulator::set+          Position Angle : 0 deg
2026-06-19 07:38:00        INFO        name::        No table opened.
2026-06-19 07:38:00        INFO        showcache::        The Table Cache is empty.
2026-06-19 07:38:01        INFO        SubImageFactory::createImage        Creating image 'straight_copy_0' of shape [5, 6, 7]
2026-06-19 07:38:02        INFO        SubImageFactory::createImage        Creating image 'straight_copy_1' of shape [5, 6, 7]
2026-06-19 07:38:02        INFO        SubImageFactory::createImage        Creating image 'straight_copy_2' of shape [5, 6, 7]
2026-06-19 07:38:02        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2026-06-19 07:38:02        INFO        SubImageFactory::createImage        Creating image 'straight_copy_3' of shape [5, 6, 7]
2026-06-19 07:38:02        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2026-06-19 07:38:03        INFO        name::        No table opened.
2026-06-19 07:38:03        INFO        showcache::        The Table Cache is empty.
2026-06-19 07:38:03        INFO        SubImageFactory::createImage        Creating image 'transpose_0' of shape [6, 7, 5]
2026-06-19 07:38:04        INFO        SubImageFactory::createImage        Creating image 'transpose_1' of shape [6, 7, 5]
2026-06-19 07:38:05        INFO        SubImageFactory::createImage        Creating image 'transpose_2' of shape [6, 7, 5]
2026-06-19 07:38:05        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2026-06-19 07:38:05        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2026-06-19 07:38:05        INFO        SubImageFactory::createImage        Creating image 'transpose_3' of shape [6, 7, 5]
2026-06-19 07:38:05        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2026-06-19 07:38:05        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2026-06-19 07:38:05        INFO        name::        No table opened.
2026-06-19 07:38:05        INFO        showcache::        The Table Cache is empty.