a comprehensive HTML report from Allure test results.
Build: #7 was successful
Job: Test Tasks Many Linux was successful
Job result summary
- Completed
- Duration
- 414 minutes
- Agent
- casaci-4.cv.nrao.edu test agent4
- Total tests
- 3878
Tests
- 3,878 tests in total
- 256 tests were quarantined / skipped
- 409 minutes taken in total.
Error summary
The build generated some errors. See the full build log for more details.
Error response from daemon: No such container: wheel-container-test_153550852
Error response from daemon: No such container: wheel-container-test_153550852
2025-10-23 02:09:13 WARN wvrgcal::::casa Solution for flagged antenna DA42 could not be interpolated due to insufficient number of near antennas. Was set to unity.
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
2025-10-23 02:09:58 WARN Antenna 0 has bad or no WVR and only 0 near antennas (500 m max. distance) to interpolate from. Required are 2.
2025-10-23 02:09:58 WARN Antenna 21 has bad or no WVR and only 0 near antennas (500 m max. distance) to interpolate from. Required are 2.
Calculating the coefficients now ...
WARNING: Bayesian evidence was zero for antenna 22
TObs was 255.716 196.929 122.811 93.9806 K, elevation 11.5287 deg
WARNING: Bayesian evidence was zero for antenna 22
TObs was 255.878 197.425 123.198 94.2713 K, elevation 11.5578 deg
done!
2025-10-23 02:10:01 WARN wvrgcal::::casa Solution for flagged antenna DA41 could not be interpolated due to insufficient number of near antennas. Was set to unity.
2025-10-23 02:10:01 WARN wvrgcal::::casa Solution for flagged antenna DV11 could not be interpolated due to insufficient number of near antennas. Was set to unity.
2025-10-23 02:10:01 WARN Antenna 0 has bad or no WVR and only 0 near antennas (500 m max. distance) to interpolate from. Required are 2.
2025-10-23 02:10:01 WARN Antenna 21 has bad or no WVR and only 0 near antennas (500 m max. distance) to interpolate from. Required are 2.
Calculating the coefficients now ...
WARNING: Bayesian evidence was zero for antenna 22
TObs was 255.716 196.929 122.811 93.9806 K, elevation 11.5287 deg
WARNING: Bayesian evidence was zero for antenna 22
TObs was 255.878 197.425 123.198 94.2713 K, elevation 11.5578 deg
done!
2025-10-23 02:10:04 WARN wvrgcal::::casa Solution for flagged antenna DA41 could not be interpolated due to insufficient number of near antennas. Was set to unity.
2025-10-23 02:10:04 WARN wvrgcal::::casa Solution for flagged antenna DV11 could not be interpolated due to insufficient number of near antennas. Was set to unity.
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
2025-10-23 02:10:26 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:27 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2025-10-23 02:10:27 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:27 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:27 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:27 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:27 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:28 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:28 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:28 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:28 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:28 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:28 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:28 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:28 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:30 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:30 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:30 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2025-10-23 02:10:30 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2025-10-23 02:10:30 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2025-10-23 02:10:30 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: Exception: There are not enough points (2) along the fit axis to fit 3 unknowns.
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile+ ... thrown by casacore::Record casa::ImageProfileFitter::fit(casacore::Bool) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageProfileFitter.cc, line: 232
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: Exception: Specified fit axis 5 must be less than the number of image axes (4).
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile+ ... thrown by void casa::ImageProfileFitter::_finishConstruction() at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageProfileFitter.cc, line: 574
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: Exception: box not specified correctly.
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile+ ... thrown by casacore::Record casa::CasacRegionManager::fromBCS(casacore::String&, casacore::uInt&, casacore::String&, const casacore::Record* const&, const casacore::String&, const casacore::String&, casa::CasacRegionManager::StokesControl, const casacore::String&, const casacore::IPosition&, const casacore::String&, casacore::Bool) at File: /source/casa6/casatools/src/code/imageanalysis/Regions/CasacRegionManager.cc, line: 232
2025-10-23 02:10:31 SEVERE specfit::CasacRegionManager::_fromBCS trc in box spec is greater than or equal to number of direction coordinate pixels in the image
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: 2025-10-23 02:10:31 SEVERE specfit::CasacRegionManager::_fromBCS trc in box spec is greater than or equal to number of direction coordinate pixels in the image
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: Invalid channel specification in abc of spec abc at File: /source/casa6/casatools/src/code/imageanalysis/IO/ParameterParser.cc, line: 173
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: Invalid channel specification in 0-200 of spec 0-200 at File: /source/casa6/casatools/src/code/imageanalysis/IO/ParameterParser.cc, line: 173
2025-10-23 02:10:31 SEVERE specfit::CasacRegionManager::_setPolarizationRanges (Sub)String ABC in stokes specification part ABC does not match a known polarization.
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: 2025-10-23 02:10:31 SEVERE specfit::CasacRegionManager::_setPolarizationRanges (Sub)String ABC in stokes specification part ABC does not match a known polarization.
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: LCBox::LCBox - blc [0, 0, 0, 0] must be <= trc [8, 8, 99, -2147483648]
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: Exception: Number of non-polynomials is 0 and polynomial order is less than zero. According to these inputs there is nothing to fit..
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile+ ... thrown by void casa::ImageProfileFitter::_checkNGaussAndPolyOrder() const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageProfileFitter.cc, line: 560
2025-10-23 02:10:31 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
....10....20....30....40....50....60....70....80....90....100%
2025-10-23 02:11:00 SEVERE specfit::image::fitprofile Exception Reported: The input image shape ([9, 9, 100, 1]) and mask shape ([9, 9, 1, 1]) are different, and it was specified that the mask should not be extended, so the mask cannot be applied to the (sub)image. Specifying that the mask should be extended may resolve the issue at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 306
2025-10-23 02:11:01 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
Error response from daemon: No such container: wheel-container-test_153550852
2025-10-23 02:09:13 WARN wvrgcal::::casa Solution for flagged antenna DA42 could not be interpolated due to insufficient number of near antennas. Was set to unity.
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
2025-10-23 02:09:58 WARN Antenna 0 has bad or no WVR and only 0 near antennas (500 m max. distance) to interpolate from. Required are 2.
2025-10-23 02:09:58 WARN Antenna 21 has bad or no WVR and only 0 near antennas (500 m max. distance) to interpolate from. Required are 2.
Calculating the coefficients now ...
WARNING: Bayesian evidence was zero for antenna 22
TObs was 255.716 196.929 122.811 93.9806 K, elevation 11.5287 deg
WARNING: Bayesian evidence was zero for antenna 22
TObs was 255.878 197.425 123.198 94.2713 K, elevation 11.5578 deg
done!
2025-10-23 02:10:01 WARN wvrgcal::::casa Solution for flagged antenna DA41 could not be interpolated due to insufficient number of near antennas. Was set to unity.
2025-10-23 02:10:01 WARN wvrgcal::::casa Solution for flagged antenna DV11 could not be interpolated due to insufficient number of near antennas. Was set to unity.
2025-10-23 02:10:01 WARN Antenna 0 has bad or no WVR and only 0 near antennas (500 m max. distance) to interpolate from. Required are 2.
2025-10-23 02:10:01 WARN Antenna 21 has bad or no WVR and only 0 near antennas (500 m max. distance) to interpolate from. Required are 2.
Calculating the coefficients now ...
WARNING: Bayesian evidence was zero for antenna 22
TObs was 255.716 196.929 122.811 93.9806 K, elevation 11.5287 deg
WARNING: Bayesian evidence was zero for antenna 22
TObs was 255.878 197.425 123.198 94.2713 K, elevation 11.5578 deg
done!
2025-10-23 02:10:04 WARN wvrgcal::::casa Solution for flagged antenna DA41 could not be interpolated due to insufficient number of near antennas. Was set to unity.
2025-10-23 02:10:04 WARN wvrgcal::::casa Solution for flagged antenna DV11 could not be interpolated due to insufficient number of near antennas. Was set to unity.
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
Calculating the coefficients now ...
done!
2025-10-23 02:10:26 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:27 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2025-10-23 02:10:27 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:27 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:27 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:27 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:27 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:28 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:28 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:28 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:28 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:28 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:28 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:28 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:28 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:29 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:30 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:30 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.
2025-10-23 02:10:30 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2025-10-23 02:10:30 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2025-10-23 02:10:30 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2025-10-23 02:10:30 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: Exception: There are not enough points (2) along the fit axis to fit 3 unknowns.
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile+ ... thrown by casacore::Record casa::ImageProfileFitter::fit(casacore::Bool) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageProfileFitter.cc, line: 232
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: Exception: Specified fit axis 5 must be less than the number of image axes (4).
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile+ ... thrown by void casa::ImageProfileFitter::_finishConstruction() at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageProfileFitter.cc, line: 574
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: Exception: box not specified correctly.
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile+ ... thrown by casacore::Record casa::CasacRegionManager::fromBCS(casacore::String&, casacore::uInt&, casacore::String&, const casacore::Record* const&, const casacore::String&, const casacore::String&, casa::CasacRegionManager::StokesControl, const casacore::String&, const casacore::IPosition&, const casacore::String&, casacore::Bool) at File: /source/casa6/casatools/src/code/imageanalysis/Regions/CasacRegionManager.cc, line: 232
2025-10-23 02:10:31 SEVERE specfit::CasacRegionManager::_fromBCS trc in box spec is greater than or equal to number of direction coordinate pixels in the image
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: 2025-10-23 02:10:31 SEVERE specfit::CasacRegionManager::_fromBCS trc in box spec is greater than or equal to number of direction coordinate pixels in the image
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: Invalid channel specification in abc of spec abc at File: /source/casa6/casatools/src/code/imageanalysis/IO/ParameterParser.cc, line: 173
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: Invalid channel specification in 0-200 of spec 0-200 at File: /source/casa6/casatools/src/code/imageanalysis/IO/ParameterParser.cc, line: 173
2025-10-23 02:10:31 SEVERE specfit::CasacRegionManager::_setPolarizationRanges (Sub)String ABC in stokes specification part ABC does not match a known polarization.
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: 2025-10-23 02:10:31 SEVERE specfit::CasacRegionManager::_setPolarizationRanges (Sub)String ABC in stokes specification part ABC does not match a known polarization.
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: LCBox::LCBox - blc [0, 0, 0, 0] must be <= trc [8, 8, 99, -2147483648]
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile Exception Reported: Exception: Number of non-polynomials is 0 and polynomial order is less than zero. According to these inputs there is nothing to fit..
2025-10-23 02:10:31 SEVERE specfit::image::fitprofile+ ... thrown by void casa::ImageProfileFitter::_checkNGaussAndPolyOrder() const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageProfileFitter.cc, line: 560
2025-10-23 02:10:31 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged).
....10....20....30....40....50....60....70....80....90....100%
2025-10-23 02:11:00 SEVERE specfit::image::fitprofile Exception Reported: The input image shape ([9, 9, 100, 1]) and mask shape ([9, 9, 1, 1]) are different, and it was specified that the mask should not be extended, so the mask cannot be applied to the (sub)image. Specifying that the mask should be extended may resolve the issue at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 306
2025-10-23 02:11:01 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them.