Build: #3 was successful
Job: Test Tools Many Linux 2.28 was successful
Job result summary
- Completed
- Duration
- 28 minutes
- Agent
- cbt-el7-11.cv.nrao.edu
- Total tests
- 681
Tests
- 681 tests in total
- 4 tests were quarantined / skipped
- 20 minutes taken in total.
Error summary
The build generated some errors. See the full build log for more details.
fatal: Not a git repository (or any parent up to mount point /export/home/cbt-el7-11)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
Error response from daemon: No such container: wheel-container-test
Error response from daemon: No such container: wheel-container-test
2024-08-30 02:14:49 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec.
2024-08-30 02:14:49 INFO GJonesSpline::solve() Number of cubic spline control points = 4
2024-08-30 02:14:49 INFO GJonesSpline::solve() Number of cubic spline knots = 8
2024-08-30 02:14:49 INFO GJonesSpline::solve() Number of cubic spline segments = 1
2024-08-30 02:14:49 INFO GJonesSpline::solve() Fitting amplitude spline.
2024-08-30 02:14:49 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline.
2024-08-30 02:14:49 INFO GJonesSpline::solve() Fitting phase spline.
2024-08-30 02:14:49 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline
2024-08-30 02:14:49 INFO calibrater::solve Finished solving.
2024-08-30 02:14:50 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
2024-08-30 02:14:50 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2024-08-30 02:14:50 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2024-08-30 02:14:50 INFO Clearing all model records in MS header.
2024-08-30 02:14:50 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2024-08-30 02:14:51 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2024-08-30 02:14:52 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2024-08-30 02:14:52 INFO Calibrater:: Initializing nominal selection to the whole MS.
2024-08-30 02:14:52 INFO calibrater::specifycal Beginning specifycal-----------------------
2024-08-30 02:14:52 INFO Creating G Jones table from specified parameters.
2024-08-30 02:14:52 INFO Generating 'G' corrections.
2024-08-30 02:14:52 INFO Specified parameter(s) (per spw and pol) repeated on all antennas.
2024-08-30 02:14:52 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations.
2024-08-30 02:14:52 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9])
2024-08-30 02:14:52 INFO Writing solutions to table: testcalout.cal
2024-08-30 02:14:54 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2024-08-30 02:14:54 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-08-30 02:14:54 INFO calibrater::open ****Using OLD VI-driven calibrater tool****
2024-08-30 02:14:54 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2024-08-30 02:14:54 INFO Clearing all model records in MS header.
2024-08-30 02:14:54 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2024-08-30 02:14:55 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2024-08-30 02:14:56 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2024-08-30 02:14:56 INFO Calibrater:: Initializing nominal selection to the whole MS.
2024-08-30 02:14:56 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
2024-08-30 02:14:56 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
2024-08-30 02:14:56 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-08-30 02:14:56 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)-------
2024-08-30 02:14:56 INFO Calibrater::setsolve Arranging to SOLVE:
2024-08-30 02:14:56 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2024-08-30 02:14:56 INFO Calibrater::state The following calibration terms are arranged for apply:
2024-08-30 02:14:56 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-08-30 02:14:56 INFO Calibrater::state The following calibration term is arranged for solve:
2024-08-30 02:14:56 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2024-08-30 02:14:56 INFO calibrater::solve Beginning solve-----------------------------
2024-08-30 02:14:56 INFO Calibrater::solve The following calibration terms are arranged for apply:
2024-08-30 02:14:56 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-08-30 02:14:56 INFO Calibrater::solve The following calibration term is arranged for solve:
2024-08-30 02:14:56 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2024-08-30 02:14:56 INFO Solving for Mf Mueller
2024-08-30 02:14:56 INFO For solint = inf, found 84 solution intervals.
2024-08-30 02:14:57 INFO Found good Mf Mueller solutions in 84 intervals.
2024-08-30 02:14:57 INFO Writing solutions to table: output.ms
2024-08-30 02:14:58 INFO calibrater::solve Finished solving.
2024-08-30 02:14:59 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
2024-08-30 02:14:59 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2024-08-30 02:14:59 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2024-08-30 02:14:59 INFO Clearing all model records in MS header.
2024-08-30 02:14:59 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2024-08-30 02:15:00 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2024-08-30 02:15:01 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2024-08-30 02:15:01 INFO Calibrater:: Initializing nominal selection to the whole MS.
2024-08-30 02:15:01 INFO name:: No table opened.
2024-08-30 02:15:01 INFO showcache:: The Table Cache has the following 16 entries:
2024-08-30 02:15:01 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms"
2024-08-30 02:15:01 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA"
2024-08-30 02:15:01 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION"
2024-08-30 02:15:01 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED"
2024-08-30 02:15:01 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD"
2024-08-30 02:15:01 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD"
2024-08-30 02:15:01 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY"
2024-08-30 02:15:01 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION"
2024-08-30 02:15:01 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING"
2024-08-30 02:15:01 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION"
2024-08-30 02:15:01 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR"
2024-08-30 02:15:01 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE"
2024-08-30 02:15:01 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW"
2024-08-30 02:15:01 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE"
2024-08-30 02:15:01 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL"
2024-08-30 02:15:01 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER"
2024-08-30 02:15:01 INFO name:: No table opened.
2024-08-30 02:15:01 INFO showcache:: The Table Cache is empty.
2024-08-30 02:15:01 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2024-08-30 02:15:01 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2024-08-30 02:15:01 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2024-08-30 02:15:01 INFO Clearing all model records in MS header.
2024-08-30 02:15:01 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2024-08-30 02:15:03 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2024-08-30 02:15:03 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2024-08-30 02:15:03 INFO Calibrater:: Initializing nominal selection to the whole MS.
2024-08-30 02:15:03 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
2024-08-30 02:15:03 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
2024-08-30 02:15:03 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-08-30 02:15:03 INFO calibrater::correct Beginning correct---------------------------
2024-08-30 02:15:03 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
2024-08-30 02:15:03 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-08-30 02:15:05 INFO calibrater::correct Finished correcting.
2024-08-30 02:15:05 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2024-08-30 02:15:10 INFO ms::createmultims Copying subtables from part1.ms to the other MMS members.
2024-08-30 02:15:16 INFO name:: No table opened.
2024-08-30 02:15:16 INFO name:: No table opened.
tar: work: Cannot stat: No such file or directory
tar: Exiting with failure status due to previous errors
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
WARNING: You are using pip version 22.0.4; however, version 24.2 is available.
You should consider upgrading via the '/usr/local/bin/python3.10 -m pip install --upgrade pip' command.
Cloning into 'casa-build-utils'...
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
Error response from daemon: No such container: wheel-container-test
Error response from daemon: No such container: wheel-container-test
2024-08-30 02:14:49 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec.
2024-08-30 02:14:49 INFO GJonesSpline::solve() Number of cubic spline control points = 4
2024-08-30 02:14:49 INFO GJonesSpline::solve() Number of cubic spline knots = 8
2024-08-30 02:14:49 INFO GJonesSpline::solve() Number of cubic spline segments = 1
2024-08-30 02:14:49 INFO GJonesSpline::solve() Fitting amplitude spline.
2024-08-30 02:14:49 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline.
2024-08-30 02:14:49 INFO GJonesSpline::solve() Fitting phase spline.
2024-08-30 02:14:49 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline
2024-08-30 02:14:49 INFO calibrater::solve Finished solving.
2024-08-30 02:14:50 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
2024-08-30 02:14:50 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2024-08-30 02:14:50 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2024-08-30 02:14:50 INFO Clearing all model records in MS header.
2024-08-30 02:14:50 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2024-08-30 02:14:51 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2024-08-30 02:14:52 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2024-08-30 02:14:52 INFO Calibrater:: Initializing nominal selection to the whole MS.
2024-08-30 02:14:52 INFO calibrater::specifycal Beginning specifycal-----------------------
2024-08-30 02:14:52 INFO Creating G Jones table from specified parameters.
2024-08-30 02:14:52 INFO Generating 'G' corrections.
2024-08-30 02:14:52 INFO Specified parameter(s) (per spw and pol) repeated on all antennas.
2024-08-30 02:14:52 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations.
2024-08-30 02:14:52 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9])
2024-08-30 02:14:52 INFO Writing solutions to table: testcalout.cal
2024-08-30 02:14:54 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2024-08-30 02:14:54 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-08-30 02:14:54 INFO calibrater::open ****Using OLD VI-driven calibrater tool****
2024-08-30 02:14:54 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2024-08-30 02:14:54 INFO Clearing all model records in MS header.
2024-08-30 02:14:54 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2024-08-30 02:14:55 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2024-08-30 02:14:56 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2024-08-30 02:14:56 INFO Calibrater:: Initializing nominal selection to the whole MS.
2024-08-30 02:14:56 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
2024-08-30 02:14:56 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
2024-08-30 02:14:56 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-08-30 02:14:56 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)-------
2024-08-30 02:14:56 INFO Calibrater::setsolve Arranging to SOLVE:
2024-08-30 02:14:56 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2024-08-30 02:14:56 INFO Calibrater::state The following calibration terms are arranged for apply:
2024-08-30 02:14:56 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-08-30 02:14:56 INFO Calibrater::state The following calibration term is arranged for solve:
2024-08-30 02:14:56 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2024-08-30 02:14:56 INFO calibrater::solve Beginning solve-----------------------------
2024-08-30 02:14:56 INFO Calibrater::solve The following calibration terms are arranged for apply:
2024-08-30 02:14:56 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-08-30 02:14:56 INFO Calibrater::solve The following calibration term is arranged for solve:
2024-08-30 02:14:56 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2024-08-30 02:14:56 INFO Solving for Mf Mueller
2024-08-30 02:14:56 INFO For solint = inf, found 84 solution intervals.
2024-08-30 02:14:57 INFO Found good Mf Mueller solutions in 84 intervals.
2024-08-30 02:14:57 INFO Writing solutions to table: output.ms
2024-08-30 02:14:58 INFO calibrater::solve Finished solving.
2024-08-30 02:14:59 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
2024-08-30 02:14:59 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2024-08-30 02:14:59 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2024-08-30 02:14:59 INFO Clearing all model records in MS header.
2024-08-30 02:14:59 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2024-08-30 02:15:00 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2024-08-30 02:15:01 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2024-08-30 02:15:01 INFO Calibrater:: Initializing nominal selection to the whole MS.
2024-08-30 02:15:01 INFO name:: No table opened.
2024-08-30 02:15:01 INFO showcache:: The Table Cache has the following 16 entries:
2024-08-30 02:15:01 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms"
2024-08-30 02:15:01 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA"
2024-08-30 02:15:01 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION"
2024-08-30 02:15:01 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED"
2024-08-30 02:15:01 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD"
2024-08-30 02:15:01 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD"
2024-08-30 02:15:01 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY"
2024-08-30 02:15:01 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION"
2024-08-30 02:15:01 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING"
2024-08-30 02:15:01 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION"
2024-08-30 02:15:01 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR"
2024-08-30 02:15:01 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE"
2024-08-30 02:15:01 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW"
2024-08-30 02:15:01 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE"
2024-08-30 02:15:01 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL"
2024-08-30 02:15:01 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER"
2024-08-30 02:15:01 INFO name:: No table opened.
2024-08-30 02:15:01 INFO showcache:: The Table Cache is empty.
2024-08-30 02:15:01 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2024-08-30 02:15:01 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2024-08-30 02:15:01 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2024-08-30 02:15:01 INFO Clearing all model records in MS header.
2024-08-30 02:15:01 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2024-08-30 02:15:03 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2024-08-30 02:15:03 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2024-08-30 02:15:03 INFO Calibrater:: Initializing nominal selection to the whole MS.
2024-08-30 02:15:03 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
2024-08-30 02:15:03 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
2024-08-30 02:15:03 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-08-30 02:15:03 INFO calibrater::correct Beginning correct---------------------------
2024-08-30 02:15:03 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
2024-08-30 02:15:03 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-08-30 02:15:05 INFO calibrater::correct Finished correcting.
2024-08-30 02:15:05 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2024-08-30 02:15:10 INFO ms::createmultims Copying subtables from part1.ms to the other MMS members.
2024-08-30 02:15:16 INFO name:: No table opened.
2024-08-30 02:15:16 INFO name:: No table opened.
tar: work: Cannot stat: No such file or directory
tar: Exiting with failure status due to previous errors
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
WARNING: You are using pip version 22.0.4; however, version 24.2 is available.
You should consider upgrading via the '/usr/local/bin/python3.10 -m pip install --upgrade pip' command.
Cloning into 'casa-build-utils'...