Build: #5 was successful
Job: Test Tools Many Linux 2014 Py3.10 was successful
Build log
The build generated 53,290 lines of output.The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
25-May-2024 13:45:46 | 2024-05-25 17:45:47 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
25-May-2024 13:45:46 | 2024-05-25 17:45:47 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
25-May-2024 13:45:46 | 2024-05-25 17:45:47 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
25-May-2024 13:45:46 | 2024-05-25 17:45:47 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
25-May-2024 13:45:46 | 2024-05-25 17:45:47 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
25-May-2024 13:45:46 | 2024-05-25 17:45:47 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
25-May-2024 13:45:46 | 2024-05-25 17:45:47 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
25-May-2024 13:45:46 | 2024-05-25 17:45:47 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
25-May-2024 13:45:46 | 2024-05-25 17:45:47 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
25-May-2024 13:45:46 | 2024-05-25 17:45:47 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
25-May-2024 13:45:46 | 2024-05-25 17:45:47 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
25-May-2024 13:45:46 | 2024-05-25 17:45:47 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350681/0.587724/0.894558 |
25-May-2024 13:45:46 | 2024-05-25 17:45:47 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
25-May-2024 13:45:48 | 2024-05-25 17:45:49 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.296/59.0077/111.454 |
25-May-2024 13:45:48 | 2024-05-25 17:45:49 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
25-May-2024 13:45:48 | 2024-05-25 17:45:49 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.354236/0.581733/0.988903 |
25-May-2024 13:45:48 | 2024-05-25 17:45:49 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
25-May-2024 13:45:50 | 2024-05-25 17:45:50 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 17.2419/56.3249/117.264 |
25-May-2024 13:45:50 | 2024-05-25 17:45:50 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
25-May-2024 13:45:50 | 2024-05-25 17:45:50 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
25-May-2024 13:45:50 | 2024-05-25 17:45:50 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
25-May-2024 13:45:50 | 2024-05-25 17:45:50 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
25-May-2024 13:45:50 | 2024-05-25 17:45:50 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
25-May-2024 13:45:50 | 2024-05-25 17:45:50 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
25-May-2024 13:45:50 | 2024-05-25 17:45:50 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
25-May-2024 13:45:50 | 2024-05-25 17:45:50 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
25-May-2024 13:45:50 | 2024-05-25 17:45:50 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
25-May-2024 13:45:50 | 2024-05-25 17:45:50 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
25-May-2024 13:45:50 | 2024-05-25 17:45:50 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
25-May-2024 13:45:50 | 2024-05-25 17:45:50 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0850169/0.113968/0.15276 |
25-May-2024 13:45:50 | 2024-05-25 17:45:50 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.67561/5.33243/8.17296 |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0784236/0.114345/0.159908 |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.46392/5.27232/7.20673 |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0703936/0.102501/0.131676 |
25-May-2024 13:45:50 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.98728/4.47977/5.84264 |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0751114/0.102994/0.138529 |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.18629/4.47068/5.8941 |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350626/0.604424/0.974388 |
25-May-2024 13:45:51 | 2024-05-25 17:45:51 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
25-May-2024 13:45:53 | 2024-05-25 17:45:53 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.2542/59.3511/120.719 |
25-May-2024 13:45:53 | 2024-05-25 17:45:53 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
25-May-2024 13:45:53 | 2024-05-25 17:45:53 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.382806/0.598119/0.941571 |
25-May-2024 13:45:53 | 2024-05-25 17:45:53 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 20.0637/57.2112/118.101 |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0750931/0.0978998/0.125897 |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.72932/3.98787/5.33715 |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0658572/0.0972125/0.140794 |
25-May-2024 13:45:55 | 2024-05-25 17:45:55 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
25-May-2024 13:45:55 | 2024-05-25 17:45:56 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.97943/3.97841/5.72903 |
25-May-2024 13:45:55 | 2024-05-25 17:45:56 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
25-May-2024 13:45:55 | 2024-05-25 17:45:56 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
25-May-2024 13:45:55 | 2024-05-25 17:45:56 INFO Calibrater::solve Found good BPOLY solutions in 7 slots. |
25-May-2024 13:45:55 | 2024-05-25 17:45:56 INFO calibrater::solve Finished solving. |
25-May-2024 13:45:55 | 2024-05-25 17:45:56 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
25-May-2024 13:45:55 | test_tool_calibrater.py::calibrater_test::test_solveBandpass |
25-May-2024 13:45:55 | Check that solve band poly creates the output table |
25-May-2024 13:45:55 | PASSED |
25-May-2024 13:45:55 | |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO Clearing all model records in MS header. |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO Calibrater:: Initializing nominal selection to the whole MS. |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO calibrater::setsolvegainspline Beginning setsolvegainspline--(MSSelection version)------- |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO Calibrater::setsolvegainspline Arranging to SOLVE: |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO Calibrater::setsolvegainspline . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO calibrater::solve Beginning solve----------------------------- |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO Calibrater::solve The following calibration terms are arranged for apply: |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO Calibrater::solve . (None) |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO Calibrater::solve The following calibration term is arranged for solve: |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO Calibrater::solve . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO GJonesSpline::solve() Fitting time-dependent cubic splines. |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO GJonesSpline::solve() Solving for phase splines with splinetime= 10800 |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO GJonesSpline::solve() Solving for amplitude splines with splinetime= 10800 |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO GJonesSpline::solve() Accumulating data for: field= 1331+30500002_0, spw= 0, nchan= 63 |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63 |
25-May-2024 13:45:56 | 2024-05-25 17:45:56 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63 |
25-May-2024 13:45:56 | 2024-05-25 17:45:57 INFO GJonesSpline::solve() Number of timestamps in data = 60 |
25-May-2024 13:45:56 | 2024-05-25 17:45:57 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec. |
25-May-2024 13:45:56 | 2024-05-25 17:45:57 INFO GJonesSpline::solve() Number of cubic spline control points = 4 |
25-May-2024 13:45:56 | 2024-05-25 17:45:57 INFO GJonesSpline::solve() Number of cubic spline knots = 8 |
25-May-2024 13:45:56 | 2024-05-25 17:45:57 INFO GJonesSpline::solve() Number of cubic spline segments = 1 |
25-May-2024 13:45:56 | 2024-05-25 17:45:57 INFO GJonesSpline::solve() Fitting amplitude spline. |
25-May-2024 13:45:56 | test_tool_calibrater.py::calibrater_test::test_solveGainspline DPBTRF ;problem leading minor 23 |
25-May-2024 13:45:56 | DPBTRF ;problem leading minor 23 |
25-May-2024 13:45:56 | 2024-05-25 17:45:57 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline. |
25-May-2024 13:45:56 | 2024-05-25 17:45:57 INFO GJonesSpline::solve() Fitting phase spline. |
25-May-2024 13:45:56 | DPBTRF ;problem leading minor 22 |
25-May-2024 13:45:56 | DPBTRF ;problem leading minor 22 |
25-May-2024 13:45:56 | 2024-05-25 17:45:57 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline |
25-May-2024 13:45:56 | 2024-05-25 17:45:57 INFO calibrater::solve Finished solving. |
25-May-2024 13:45:56 | 2024-05-25 17:45:57 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
25-May-2024 13:45:56 | |
25-May-2024 13:45:56 | Check that solve gain spline creates the output table |
25-May-2024 13:45:56 | PASSED |
25-May-2024 13:45:56 | |
25-May-2024 13:45:56 | 2024-05-25 17:45:57 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
25-May-2024 13:45:56 | 2024-05-25 17:45:57 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
25-May-2024 13:45:56 | 2024-05-25 17:45:57 INFO Clearing all model records in MS header. |
25-May-2024 13:45:56 | 2024-05-25 17:45:57 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
25-May-2024 13:45:58 | 2024-05-25 17:45:59 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
25-May-2024 13:45:58 | 2024-05-25 17:45:59 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
25-May-2024 13:45:58 | 2024-05-25 17:45:59 INFO Calibrater:: Initializing nominal selection to the whole MS. |
25-May-2024 13:45:58 | 2024-05-25 17:45:59 INFO calibrater::specifycal Beginning specifycal----------------------- |
25-May-2024 13:45:58 | 2024-05-25 17:45:59 INFO Creating G Jones table from specified parameters. |
25-May-2024 13:45:58 | 2024-05-25 17:45:59 INFO Generating 'G' corrections. |
25-May-2024 13:45:58 | 2024-05-25 17:45:59 INFO Specified parameter(s) (per spw and pol) repeated on all antennas. |
25-May-2024 13:45:58 | 2024-05-25 17:45:59 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations. |
25-May-2024 13:45:58 | 2024-05-25 17:45:59 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9]) |
25-May-2024 13:45:58 | 2024-05-25 17:45:59 INFO Writing solutions to table: testcalout.cal |
25-May-2024 13:45:59 | 2024-05-25 17:45:59 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
25-May-2024 13:45:59 | test_tool_calibrater.py::calibrater_test::test_specifyCal |
25-May-2024 13:45:59 | Check that specifycal can set values for specific spws and antennas |
25-May-2024 13:45:59 | PASSED |
25-May-2024 13:45:59 | |
25-May-2024 13:45:59 | 2024-05-25 17:45:59 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
25-May-2024 13:45:59 | 2024-05-25 17:45:59 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
25-May-2024 13:45:59 | 2024-05-25 17:45:59 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
25-May-2024 13:45:59 | 2024-05-25 17:45:59 INFO Clearing all model records in MS header. |
25-May-2024 13:45:59 | 2024-05-25 17:45:59 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
25-May-2024 13:46:01 | 2024-05-25 17:46:01 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
25-May-2024 13:46:01 | 2024-05-25 17:46:01 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
25-May-2024 13:46:01 | 2024-05-25 17:46:01 INFO Calibrater:: Initializing nominal selection to the whole MS. |
25-May-2024 13:46:01 | 2024-05-25 17:46:02 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
25-May-2024 13:46:01 | 2024-05-25 17:46:02 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
25-May-2024 13:46:01 | 2024-05-25 17:46:02 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
25-May-2024 13:46:01 | 2024-05-25 17:46:02 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
25-May-2024 13:46:01 | 2024-05-25 17:46:02 INFO Calibrater::setsolve Arranging to SOLVE: |
25-May-2024 13:46:01 | 2024-05-25 17:46:02 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
25-May-2024 13:46:01 | 2024-05-25 17:46:02 INFO Calibrater::state The following calibration terms are arranged for apply: |
25-May-2024 13:46:01 | 2024-05-25 17:46:02 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
25-May-2024 13:46:01 | 2024-05-25 17:46:02 INFO Calibrater::state The following calibration term is arranged for solve: |
25-May-2024 13:46:01 | 2024-05-25 17:46:02 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
25-May-2024 13:46:01 | 2024-05-25 17:46:02 INFO calibrater::solve Beginning solve----------------------------- |
25-May-2024 13:46:01 | 2024-05-25 17:46:02 INFO Calibrater::solve The following calibration terms are arranged for apply: |
25-May-2024 13:46:01 | 2024-05-25 17:46:02 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
25-May-2024 13:46:01 | 2024-05-25 17:46:02 INFO Calibrater::solve The following calibration term is arranged for solve: |
25-May-2024 13:46:01 | 2024-05-25 17:46:02 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
25-May-2024 13:46:01 | 2024-05-25 17:46:02 INFO Solving for Mf Mueller |
25-May-2024 13:46:01 | 2024-05-25 17:46:02 INFO For solint = inf, found 84 solution intervals. |
25-May-2024 13:46:03 | 2024-05-25 17:46:04 INFO Found good Mf Mueller solutions in 84 intervals. |
25-May-2024 13:46:03 | 2024-05-25 17:46:04 INFO Writing solutions to table: output.ms |
25-May-2024 13:46:03 | 2024-05-25 17:46:04 INFO calibrater::solve Finished solving. |
25-May-2024 13:46:03 | 2024-05-25 17:46:04 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
25-May-2024 13:46:03 | test_tool_calibrater.py::calibrater_test::test_standardPath |
25-May-2024 13:46:03 | open setapply setsolve state solve close |
25-May-2024 13:46:03 | PASSED |
25-May-2024 13:46:03 | |
25-May-2024 13:46:04 | 2024-05-25 17:46:04 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
25-May-2024 13:46:04 | 2024-05-25 17:46:04 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
25-May-2024 13:46:04 | 2024-05-25 17:46:04 INFO Clearing all model records in MS header. |
25-May-2024 13:46:04 | 2024-05-25 17:46:04 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO Calibrater:: Initializing nominal selection to the whole MS. |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO name:: No table opened. |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: The Table Cache has the following 16 entries: |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO name:: No table opened. |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 INFO showcache:: The Table Cache is empty. |
25-May-2024 13:46:05 | 2024-05-25 17:46:06 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
25-May-2024 13:46:06 | test_tool_calibrater.py::calibrater_test::test_takesMs |
25-May-2024 13:46:06 | Check that the calibrater tool can open and close an MS |
25-May-2024 13:46:06 | PASSED |
25-May-2024 13:46:06 | |
25-May-2024 13:46:06 | 2024-05-25 17:46:06 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
25-May-2024 13:46:06 | 2024-05-25 17:46:06 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
25-May-2024 13:46:06 | 2024-05-25 17:46:06 INFO Clearing all model records in MS header. |
25-May-2024 13:46:06 | 2024-05-25 17:46:06 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
25-May-2024 13:46:07 | 2024-05-25 17:46:08 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
25-May-2024 13:46:08 | 2024-05-25 17:46:08 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
25-May-2024 13:46:08 | 2024-05-25 17:46:08 INFO Calibrater:: Initializing nominal selection to the whole MS. |
25-May-2024 13:46:08 | 2024-05-25 17:46:08 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
25-May-2024 13:46:08 | 2024-05-25 17:46:08 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
25-May-2024 13:46:08 | 2024-05-25 17:46:08 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
25-May-2024 13:46:08 | 2024-05-25 17:46:08 INFO calibrater::correct Beginning correct--------------------------- |
25-May-2024 13:46:08 | 2024-05-25 17:46:08 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
25-May-2024 13:46:08 | 2024-05-25 17:46:08 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
25-May-2024 13:46:11 | 2024-05-25 17:46:11 INFO calibrater::correct Finished correcting. |
25-May-2024 13:46:11 | 2024-05-25 17:46:11 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
25-May-2024 13:46:11 | test_tool_calibrater.py::calibrater_test::test_writeToCorrected |
25-May-2024 13:46:11 | Check that the tool writes to the CORRECTED_DATA column |
25-May-2024 13:46:11 | PASSED |
25-May-2024 13:46:11 | |
25-May-2024 13:46:11 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml - |
25-May-2024 13:46:11 | ================== 24 passed, 1 warning in 111.76s (0:01:51) =================== |
25-May-2024 13:46:11 | ============================= test session starts ============================== |
25-May-2024 13:46:11 | platform linux -- Python 3.10.12, pytest-8.2.1, pluggy-1.5.0 -- /home/casatest/venv/bin/python3.10 |
25-May-2024 13:46:11 | cachedir: .pytest_cache |
25-May-2024 13:46:11 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose |
25-May-2024 13:46:11 | configfile: pytest.ini |
25-May-2024 13:46:12 | collecting ... collected 6 items |
25-May-2024 13:46:12 | |
25-May-2024 13:46:12 | |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO SubImageFactory::createImage Creating image 'blahxx.im' of shape [1536, 1536, 1, 2] |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO name:: No table opened. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO showcache:: The Table Cache is empty. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO name:: No table opened. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO showcache:: The Table Cache is empty. |
25-May-2024 13:46:12 | test_tool_image_transpose.py::ia_transpose_test::test_cas_2364 |
25-May-2024 13:46:12 | test CAS-2364 fix |
25-May-2024 13:46:12 | PASSED |
25-May-2024 13:46:12 | |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE image::open (file src/tools/image/image_cmpt.cc, line 4208) Exception Reported: Exception: File name is empty. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE image::open (file src/tools/image/image_cmpt.cc, line 4208)+ ... thrown by static void casa::ImageFactory::_checkInfile(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 371 |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE ImageTransposer::_getOrder Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-05-25 17:46:13 SEVERE ImageTransposer::_getOrder Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE ImageTransposer::_getOrder Axis number 0 specified multiple times in order parameter 10 . It can only be specified once. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-05-25 17:46:13 SEVERE ImageTransposer::_getOrder Axis number 0 specified multiple times in order parameter 10 . It can only be specified once. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665) Image has 3 axes but 2 were given. Number of given axes must match the number of image axes |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-05-25 17:46:13 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665) Image has 3 axes but 2 were given. Number of given axes must match the number of image axes |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-05-25 17:46:13 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE ImageTransposer::_getOrder Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-05-25 17:46:13 SEVERE ImageTransposer::_getOrder Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665) Image has 3 axes but 4 were given. Number of given axes must match the number of image axes |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-05-25 17:46:13 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665) Image has 3 axes but 4 were given. Number of given axes must match the number of image axes |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-05-25 17:46:13 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665) No axis matches requested axis s. Image axis names are [right ascension, declination, frequency] |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-05-25 17:46:13 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665) No axis matches requested axis s. Image axis names are [right ascension, declination, frequency] |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665) Ambiguous axis specification. Both r and r match image axis name right ascension |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-05-25 17:46:13 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665) Ambiguous axis specification. Both r and r match image axis name right ascension |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-05-25 17:46:13 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO name:: No table opened. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO showcache:: The Table Cache is empty. |
25-May-2024 13:46:12 | test_tool_image_transpose.py::ia_transpose_test::test_exceptions |
25-May-2024 13:46:12 | imtrans: Test various exception cases |
25-May-2024 13:46:12 | PASSED |
25-May-2024 13:46:12 | |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO ImageFactory::createImage Created Temp image of shape [10, 10, 4, 10] with float valued pixels. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO ::::ImageFactory::createImage Created Temp image of shape [10, 10, 4, 10] with float valued pixels. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO ::::image::fromshape Ran ia.fromshape |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO ::::image::fromshape ia.fromshape(outfile="", shape=[10,10,4,10], csys={...}, linear=false, overwrite=false, log=true, type="f") |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO ::::image::transpose Ran ia.transpose |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO ::::image::transpose ia.transpose(outfile="", order="3210") |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO name:: No table opened. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO showcache:: The Table Cache is empty. |
25-May-2024 13:46:12 | test_tool_image_transpose.py::ia_transpose_test::test_history |
25-May-2024 13:46:12 | Test history records are written |
25-May-2024 13:46:12 | PASSED |
25-May-2024 13:46:12 | |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO ImageFactory::createImage Created Temp image of shape [10, 20, 30] with float valued pixels. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO BeamManipulator::set Setting (global) restoring beam. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO BeamManipulator::set Beam parameters: Major : 4 arcmin |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO BeamManipulator::set+ Minor : 3 arcmin |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO BeamManipulator::set+ Position Angle : 0 deg |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO name:: No table opened. |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO showcache:: The Table Cache is empty. |
25-May-2024 13:46:12 | test_tool_image_transpose.py::ia_transpose_test::test_imageinfo |
25-May-2024 13:46:12 | Verify image info is copied |
25-May-2024 13:46:12 | PASSED |
25-May-2024 13:46:12 | |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO SubImageFactory::createImage Creating image 'straight_copy_0' of shape [5, 6, 7] |
25-May-2024 13:46:12 | 2024-05-25 17:46:13 INFO SubImageFactory::createImage Creating image 'straight_copy_1' of shape [5, 6, 7] |
25-May-2024 13:46:13 | 2024-05-25 17:46:13 INFO SubImageFactory::createImage Creating image 'straight_copy_2' of shape [5, 6, 7] |
25-May-2024 13:46:13 | 2024-05-25 17:46:13 INFO ImageTransposer::transpose Old to new axis mapping is [0, 1, 2] |
25-May-2024 13:46:13 | 2024-05-25 17:46:13 INFO SubImageFactory::createImage Creating image 'straight_copy_3' of shape [5, 6, 7] |
25-May-2024 13:46:13 | 2024-05-25 17:46:13 INFO ImageTransposer::transpose Old to new axis mapping is [0, 1, 2] |
25-May-2024 13:46:13 | 2024-05-25 17:46:13 INFO name:: No table opened. |
25-May-2024 13:46:13 | 2024-05-25 17:46:13 INFO showcache:: The Table Cache is empty. |
25-May-2024 13:46:13 | test_tool_image_transpose.py::ia_transpose_test::test_straight_copy |
25-May-2024 13:46:13 | No actual transposing |
25-May-2024 13:46:13 | PASSED |
25-May-2024 13:46:13 | |
25-May-2024 13:46:13 | 2024-05-25 17:46:13 INFO SubImageFactory::createImage Creating image 'transpose_0' of shape [6, 7, 5] |
25-May-2024 13:46:13 | 2024-05-25 17:46:13 INFO SubImageFactory::createImage Creating image 'transpose_1' of shape [6, 7, 5] |
25-May-2024 13:46:13 | 2024-05-25 17:46:13 INFO SubImageFactory::createImage Creating image 'transpose_2' of shape [6, 7, 5] |
25-May-2024 13:46:13 | 2024-05-25 17:46:13 INFO ImageTransposer::transpose Old to new axis mapping is [1, 2, 0] |
25-May-2024 13:46:13 | 2024-05-25 17:46:13 INFO ImageTransposer::transpose Old to new axis mapping is [1, 2, 0] |
25-May-2024 13:46:13 | 2024-05-25 17:46:13 INFO SubImageFactory::createImage Creating image 'transpose_3' of shape [6, 7, 5] |
25-May-2024 13:46:13 | 2024-05-25 17:46:13 INFO ImageTransposer::transpose Old to new axis mapping is [1, 2, 0] |
25-May-2024 13:46:13 | 2024-05-25 17:46:13 INFO ImageTransposer::transpose Old to new axis mapping is [1, 2, 0] |
25-May-2024 13:46:13 | 2024-05-25 17:46:13 INFO name:: No table opened. |
25-May-2024 13:46:13 | 2024-05-25 17:46:13 INFO showcache:: The Table Cache is empty. |
25-May-2024 13:46:13 | test_tool_image_transpose.py::ia_transpose_test::test_transpose |
25-May-2024 13:46:13 | Test transposing |
25-May-2024 13:46:13 | PASSED |
25-May-2024 13:46:13 | |
25-May-2024 13:46:13 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_transpose/nose.xml - |
25-May-2024 13:46:13 | ========================= 6 passed, 1 warning in 1.41s ========================= |
25-May-2024 13:46:13 | ============================= test session starts ============================== |
25-May-2024 13:46:13 | platform linux -- Python 3.10.12, pytest-8.2.1, pluggy-1.5.0 -- /home/casatest/venv/bin/python3.10 |
25-May-2024 13:46:13 | cachedir: .pytest_cache |
25-May-2024 13:46:13 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol |
25-May-2024 13:46:13 | configfile: pytest.ini |
25-May-2024 13:46:14 | collecting ... collected 17 items |
25-May-2024 13:46:14 | |
25-May-2024 13:46:14 | |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 INFO imagepol::complexFractionalLinearPolarization(...) Creating image 'g' of shape [10, 10, 10, 1] |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 INFO imagepol::complexFractionalLinearPolarization(...) Creating image 'hh' of shape [10, 10, 10, 1] |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 SEVERE imagepol::complexfraclinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 SEVERE imagepol::complexfraclinpol+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
25-May-2024 13:46:14 | test_tool_imagepol.py::po_complexfraclinpol_test::test_multibeam |
25-May-2024 13:46:14 | Test multibeam images for correct behavior |
25-May-2024 13:46:14 | pol_eq_beams.fits |
25-May-2024 13:46:14 | PASSED |
25-May-2024 13:46:14 | |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 INFO ImagePolProxy::complexlinpol Creating image 'g' of shape [10, 10, 10, 1] |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 INFO ImagePolProxy::complexlinpol Creating image 'hh' of shape [10, 10, 10, 1] |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 SEVERE imagepol::complexlinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 SEVERE imagepol::complexlinpol+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 INFO name:: No table opened. |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 INFO showcache:: The Table Cache is empty. |
25-May-2024 13:46:14 | test_tool_imagepol.py::po_complexlinpol_test::test_multibeam |
25-May-2024 13:46:14 | Test multibeam images for correct behavior |
25-May-2024 13:46:14 | PASSED |
25-May-2024 13:46:14 | |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 SEVERE imagepol::depolratio Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 SEVERE imagepol::depolratio+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 SEVERE imagepol::depolratio Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 SEVERE imagepol::depolratio+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
25-May-2024 13:46:14 | test_tool_imagepol.py::po_depolratio_test::test_multibeam |
25-May-2024 13:46:14 | Test multibeam images for correct behavior |
25-May-2024 13:46:14 | pol_eq_beams.fits |
25-May-2024 13:46:14 | PASSED |
25-May-2024 13:46:14 | |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
25-May-2024 13:46:14 | 2024-05-25 17:46:14 SEVERE imagepol::fourierrotationmeasure Exception Reported: 2024-05-25 17:46:14 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 SEVERE imagepol::fourierrotationmeasure Exception Reported: 2024-05-25 17:46:15 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
25-May-2024 13:46:14 | test_tool_imagepol.py::po_fourierrotationmeasure_test::test_multibeam |
25-May-2024 13:46:14 | Test multibeam images for correct behavior |
25-May-2024 13:46:14 | pol_eq_beams.fits |
25-May-2024 13:46:14 | PASSED |
25-May-2024 13:46:14 | |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImagePolarimetry::fracLinPol Debiasing with sigma = 1.0119 |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | test_tool_imagepol.py::po_fraclinpol_test::test_multibeam |
25-May-2024 13:46:14 | Test multibeam images for correct behavior |
25-May-2024 13:46:14 | pol_eq_beams.fits |
25-May-2024 13:46:14 | PASSED |
25-May-2024 13:46:14 | |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImagePolarimetry::fracTotPol Debiasing with sigma = 1.0119 |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | test_tool_imagepol.py::po_fractotpol_test::test_multibeam |
25-May-2024 13:46:14 | Test multibeam images for correct behavior |
25-May-2024 13:46:14 | pol_eq_beams.fits |
25-May-2024 13:46:14 | PASSED |
25-May-2024 13:46:14 | |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImagePolTask::_sigma Determined noise from V image to be 1.0119 |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImagePolTask::_sigma Debiasing with sigma = 1.0119 |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | test_tool_imagepol.py::po_linpolint_test::test_multibeam |
25-May-2024 13:46:14 | Test multibeam images for correct behavior |
25-May-2024 13:46:14 | pol_eq_beams.fits |
25-May-2024 13:46:14 | PASSED |
25-May-2024 13:46:14 | |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 WARN LinearPolarizationAngleCalculator::compute (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/LinearPolarizationAngleCalculator.cc, line 40) The input image has multiple beams. Because these beams can vary with stokes/polarization, they will not be copied to the output image |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO SubImageFactory::createImage Creating image 'g' of shape [10, 10, 10, 1] |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 SEVERE imagepol::linpolposang Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 SEVERE imagepol::linpolposang+ ... thrown by casacore::Bool casa::ImagePolTask::_checkBeams(const std::vector<casa::ImagePolTask::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolTask.cc, line: 79 |
25-May-2024 13:46:14 | test_tool_imagepol.py::po_linpolposang_test::test_multibeam |
25-May-2024 13:46:14 | Test multibeam images for correct behavior |
25-May-2024 13:46:14 | pol_eq_beams.fits |
25-May-2024 13:46:14 | PASSED |
25-May-2024 13:46:14 | |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFactory::createImage Created Paged image 'rm_input.im' of shape [20, 20, 4, 20] with float valued pixels. |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImagePol::rotationMeasure Creating image 'rm.im' of shape [20, 20] |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImagePol::rotationMeasure Creating image 'pa0.im' of shape [20, 20, 1] |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO image::statistics Determining stats for image rm.im |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageRegion::fromRecord Selected bounding box : |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageRegion::fromRecord+ [0, 0] to [19, 19] (00:00:40.000, -00.10.00.001 to 23:59:24.000, +00.09.00.001) |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::_logStartup Statistics calculated using Classic algorithm |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::_logStartup Regions --- |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (pixel) [blc]: [0, 0] |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::_logStartup -- top-right corner (pixel) [trc]: [19, 19] |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (world) [blcf]: 00:00:40.000, -00.10.00.001 |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::_logStartup -- top-right corner (world) [trcf]: 23:59:24.000, +00.09.00.001 |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO Values --- |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- number of points [npts]: 400 |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- maximum value [max]: 9.60001 rad/m/m |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- minimum value [min]: 9.59997 rad/m/m |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- position of max value (pixel) [maxpos]: [3, 0] |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- position of min value (pixel) [minpos]: [1, 0] |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- position of max value (world) [maxposf]: 00:00:28.000, -00.10.00.001 |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- position of min value (world) [minposf]: 00:00:36.000, -00.10.00.001 |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- Sum of pixel values [sum]: 3839.99 rad/m/m |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- Sum of squared pixel values [sumsq]: 36863.9 rad/m/m.rad/m/m |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO Statistics --- |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- Mean of the pixel values [mean]: 9.59998 rad/m/m |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- Variance of the pixel values : 9.48741e-11 rad/m/m |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- Standard deviation of the Mean [sigma]: 9.74033e-06 rad/m/m |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- Root mean square [rms]: 9.59998 rad/m/m |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::statistics Sum column unit = rad/m/m |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::statistics+ Mean column unit = rad/m/m |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::statistics+ Std_dev column unit = rad/m/m |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::statistics+ Minimum column unit = rad/m/m |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::statistics+ Maximum column unit = rad/m/m |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::statistics Npts Sum Mean Rms Std_dev Minimum Maximum |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::statistics 4.000000e+02 3.839993e+03 9.599982e+00 9.599982e+00 9.740334e-06 9.599969e+00 9.600007e+00 |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO deleted table /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/rm.im |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO image::statistics Determining stats for image pa0.im |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO CasacRegionManager::fromBCS Using polarizations ALL |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageRegion::fromRecord Selected bounding box : |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageRegion::fromRecord+ [0, 0, 0] to [19, 19, 0] (00:00:40.000, -00.10.00.001, Pangle to 23:59:24.000, +00.09.00.001, Pangle) |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::_logStartup Statistics calculated using Classic algorithm |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::_logStartup Regions --- |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (pixel) [blc]: [0, 0, 0] |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::_logStartup -- top-right corner (pixel) [trc]: [19, 19, 0] |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (world) [blcf]: 00:00:40.000, -00.10.00.001, Pangle |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::_logStartup -- top-right corner (world) [trcf]: 23:59:24.000, +00.09.00.001, Pangle |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO Values --- |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- number of points [npts]: 400 |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- maximum value [max]: 22.5001 deg |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- minimum value [min]: 22.5 deg |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- position of max value (pixel) [maxpos]: [1, 0, 0] |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- position of min value (pixel) [minpos]: [3, 0, 0] |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- position of max value (world) [maxposf]: 00:00:36.000, -00.10.00.001, Pangle |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- position of min value (world) [minposf]: 00:00:28.000, -00.10.00.001, Pangle |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- Sum of pixel values [sum]: 9000.02 deg |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- Sum of squared pixel values [sumsq]: 202501 deg.deg |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO Statistics --- |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- Mean of the pixel values [mean]: 22.5 deg |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- Variance of the pixel values : 6.26899e-10 deg |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- Standard deviation of the Mean [sigma]: 2.5038e-05 deg |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO -- Root mean square [rms]: 22.5 deg |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::statistics Sum column unit = deg |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::statistics+ Mean column unit = deg |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::statistics+ Std_dev column unit = deg |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::statistics+ Minimum column unit = deg |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::statistics+ Maximum column unit = deg |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::statistics Npts Sum Mean Rms Std_dev Minimum Maximum |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageStatsCalculator::statistics 4.000000e+02 9.000018e+03 2.250005e+01 2.250005e+01 2.503796e-05 2.249998e+01 2.250008e+01 |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO deleted table /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/pa0.im |
25-May-2024 13:46:14 | test_tool_imagepol.py::po_rotationmeasure_test::test_algorithm |
25-May-2024 13:46:14 | Test rotation measure computation algorithm |
25-May-2024 13:46:14 | PASSED |
25-May-2024 13:46:14 | |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImagePol::rotationMeasure Creating image 'g' of shape [10, 10] |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImagePol::rotationMeasure Creating image 'hh' of shape [10, 10] |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 SEVERE imagepol::rotationmeasure Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 SEVERE imagepol::rotationmeasure+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
25-May-2024 13:46:14 | test_tool_imagepol.py::po_rotationmeasure_test::test_multibeam |
25-May-2024 13:46:14 | Test multibeam images for correct behavior |
25-May-2024 13:46:14 | PASSED |
25-May-2024 13:46:14 | |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
25-May-2024 13:46:14 | test_tool_imagepol.py::po_sigma_test::test_multibeam |
25-May-2024 13:46:14 | Test multibeam images for correct behavior |
25-May-2024 13:46:14 | pol_eq_beams.fits |
25-May-2024 13:46:14 | PASSED |
25-May-2024 13:46:14 | |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 SEVERE imagepol::sigmadepolratio Exception Reported: Exception: Beams or beamsets are not equal between the two images, caonnot perform calculation. |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 SEVERE imagepol::sigmadepolratio+ ... thrown by static void casa::ImagePolarimetry::_checkBeams(const casa::ImagePolarimetry&, const casa::ImagePolarimetry&, const casacore::Vector<casa::ImagePolarimetry::StokesTypes>&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1686 |
25-May-2024 13:46:14 | test_tool_imagepol.py::po_sigmadepolratio_test::test_multibeam |
25-May-2024 13:46:14 | Test multibeam images for correct behavior |
25-May-2024 13:46:14 | PASSED |
25-May-2024 13:46:14 | |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
25-May-2024 13:46:14 | 2024-05-25 17:46:15 INFO imagepol::sigmaFracLinPol Creating image 'g' of shape [10, 10, 10, 1] |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 SEVERE imagepol::sigmafraclinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 SEVERE imagepol::sigmafraclinpol+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
25-May-2024 13:46:15 | test_tool_imagepol.py::po_sigmafraclinpol_test::test_multibeam |
25-May-2024 13:46:15 | Test multibeam images for correct behavior |
25-May-2024 13:46:15 | PASSED |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 INFO imagepol::sigmaFracTotPol Creating image 'g' of shape [10, 10, 10, 1] |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 WARN ImagePolarimetry::_setDoLinDoCirc (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line 272) I, Q, and U beams are not the same, cannot do linear portion |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 WARN ImagePolarimetry::_setDoLinDoCirc (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line 272) I and V beams are not the same, cannot do circular portion |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 SEVERE imagepol::sigmafractotpol Exception Reported: Exception: Can do neither linear nor circular portions. |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 SEVERE imagepol::sigmafractotpol+ ... thrown by void casa::ImagePolarimetry::_setDoLinDoCirc(casacore::Bool&, casacore::Bool&) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 292 |
25-May-2024 13:46:15 | test_tool_imagepol.py::po_sigmafractotpol_test::test_multibeam |
25-May-2024 13:46:15 | Test multibeam images for correct behavior |
25-May-2024 13:46:15 | PASSED |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 SEVERE imagepol::sigmalinpolint Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 SEVERE imagepol::sigmalinpolint+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
25-May-2024 13:46:15 | test_tool_imagepol.py::po_sigmalinpolint_test::test_multibeam |
25-May-2024 13:46:15 | Test multibeam images for correct behavior |
25-May-2024 13:46:15 | PASSED |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 INFO imagepol::sigmaLinPolPosAng Creating image 'g' of shape [10, 10, 10, 1] |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 SEVERE imagepol::sigmalinpolposang Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 SEVERE imagepol::sigmalinpolposang+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
25-May-2024 13:46:15 | test_tool_imagepol.py::po_sigmalinpolposang_test::test_multibeam |
25-May-2024 13:46:15 | Test multibeam images for correct behavior |
25-May-2024 13:46:15 | PASSED |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 INFO ImagePolTask::_sigma Determined noise from V image to be 1.0119 |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 INFO ImagePolTask::_sigma Debiasing with sigma = 1.0119 |
25-May-2024 13:46:15 | 2024-05-25 17:46:15 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
25-May-2024 13:46:15 | test_tool_imagepol.py::po_totpolint_test::test_multibeam |
25-May-2024 13:46:15 | Test multibeam images for correct behavior |
25-May-2024 13:46:15 | PASSED |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml - |
25-May-2024 13:46:15 | ======================== 17 passed, 1 warning in 1.51s ========================= |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_agentflagger/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/ |
25-May-2024 13:46:15 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_componentlist/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/ |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv/ |
25-May-2024 13:46:15 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pv/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv/ |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta/ |
25-May-2024 13:46:15 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_quanta/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta/ |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_table/ |
25-May-2024 13:46:15 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_table |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_table/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_table/ |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
25-May-2024 13:46:15 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msuvbinner/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
25-May-2024 13:46:15 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_sdm/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
25-May-2024 13:46:15 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_vpmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
25-May-2024 13:46:15 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_createmultims/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
25-May-2024 13:46:15 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_fitprofile/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
25-May-2024 13:46:15 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msmetadata/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
25-May-2024 13:46:15 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_deviation/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
25-May-2024 13:46:15 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_statwt/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image/ |
25-May-2024 13:46:15 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image/ |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/ |
25-May-2024 13:46:15 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_simulator/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/ |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
25-May-2024 13:46:15 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
25-May-2024 13:46:15 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_transpose/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/ |
25-May-2024 13:46:15 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol |
25-May-2024 13:46:15 | |
25-May-2024 13:46:15 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/ |
25-May-2024 13:46:16 | total 174824 |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci 15001 128563 May 25 17:29 casatestutils-6.6.4.34-py3-none-any.whl |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci 15001 178721425 May 25 17:29 casatools-6.6.4.34-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 4314 May 25 17:46 test_tool_agentflagger.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 980 May 25 17:46 test_tool_calanalysis.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 2632 May 25 17:46 test_tool_calibrater.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 661 May 25 17:46 test_tool_componentlist.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 7441 May 25 17:46 test_tool_coordsys.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 12909 May 25 17:46 test_tool_image.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 2194 May 25 17:46 test_tool_image_collapse.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 1022 May 25 17:46 test_tool_image_deviation.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 2549 May 25 17:46 test_tool_image_fitprofile.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 1152 May 25 17:46 test_tool_image_pbcor.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 857 May 25 17:46 test_tool_image_pv.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 980 May 25 17:46 test_tool_image_rebin.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 1310 May 25 17:46 test_tool_image_regrid.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 1507 May 25 17:46 test_tool_image_statistics.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 739 May 25 17:46 test_tool_image_subimage.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 864 May 25 17:46 test_tool_image_transpose.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 1940 May 25 17:46 test_tool_imagepol.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 813 May 25 17:46 test_tool_linearmosaic.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 642 May 25 17:46 test_tool_logsink.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 523 May 25 17:46 test_tool_measures.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 5198 May 25 17:46 test_tool_ms.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 341 May 25 17:46 test_tool_ms_createmultims.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 2069 May 25 17:46 test_tool_ms_statwt.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 8486 May 25 17:46 test_tool_msmetadata.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 333 May 25 17:46 test_tool_msuvbinner.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 1145 May 25 17:46 test_tool_quanta.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 3951 May 25 17:46 test_tool_regionmanager.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 2046 May 25 17:46 test_tool_sdm.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 2070 May 25 17:46 test_tool_sdm_toms.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 422 May 25 17:46 test_tool_simulator.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 1436 May 25 17:46 test_tool_table.xml |
25-May-2024 13:46:16 | -rw-r--r-- 1 casaci root 1691 May 25 17:46 test_tool_vpmanager.xml |
25-May-2024 13:46:16 | Finished task 'Test wheel' with result: Success |
25-May-2024 13:46:16 | Starting task 'Tar work directory' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
25-May-2024 13:46:16 | Beginning to execute external process for build 'CASA - CMake Release Test 6.6.4+ Python 3.10 - release-6.6.4 - Test Tools Many Linux 2014 Py3.10 #5 (CASA-CRT644PLUSPY3100-TTSGRHEL7P38-5)' ... running command line: /export/home/cbt-el7-1/bamboo-home/temp/CASA-CRT644PLUSPY3100-TTSGRHEL7P38-5-ScriptBuildTask-6398228424838517937.sh ... in: /export/home/cbt-el7-1/bamboo-home/xml-data/build-dir/CASA-CRT644PLUSPY3100-TTSGRHEL7P38 |
25-May-2024 13:46:16 | Package working directory |
25-May-2024 13:46:17 | tar: work: Cannot stat: No such file or directory |
25-May-2024 13:46:17 | tar: Exiting with failure status due to previous errors |
25-May-2024 13:46:17 | total 174828 |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci 15001 128563 May 25 17:29 casatestutils-6.6.4.34-py3-none-any.whl |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci 15001 178721425 May 25 17:29 casatools-6.6.4.34-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 4314 May 25 17:46 test_tool_agentflagger.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 980 May 25 17:46 test_tool_calanalysis.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 2632 May 25 17:46 test_tool_calibrater.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 661 May 25 17:46 test_tool_componentlist.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 7441 May 25 17:46 test_tool_coordsys.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 12909 May 25 17:46 test_tool_image.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 2194 May 25 17:46 test_tool_image_collapse.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 1022 May 25 17:46 test_tool_image_deviation.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 2549 May 25 17:46 test_tool_image_fitprofile.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 1152 May 25 17:46 test_tool_image_pbcor.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 857 May 25 17:46 test_tool_image_pv.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 980 May 25 17:46 test_tool_image_rebin.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 1310 May 25 17:46 test_tool_image_regrid.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 1507 May 25 17:46 test_tool_image_statistics.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 739 May 25 17:46 test_tool_image_subimage.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 864 May 25 17:46 test_tool_image_transpose.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 1940 May 25 17:46 test_tool_imagepol.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 813 May 25 17:46 test_tool_linearmosaic.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 642 May 25 17:46 test_tool_logsink.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 523 May 25 17:46 test_tool_measures.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 5198 May 25 17:46 test_tool_ms.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 341 May 25 17:46 test_tool_ms_createmultims.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 2069 May 25 17:46 test_tool_ms_statwt.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 8486 May 25 17:46 test_tool_msmetadata.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 333 May 25 17:46 test_tool_msuvbinner.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 1145 May 25 17:46 test_tool_quanta.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 3951 May 25 17:46 test_tool_regionmanager.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 2046 May 25 17:46 test_tool_sdm.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 2070 May 25 17:46 test_tool_sdm_toms.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 422 May 25 17:46 test_tool_simulator.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 1436 May 25 17:46 test_tool_table.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 1691 May 25 17:46 test_tool_vpmanager.xml |
25-May-2024 13:46:17 | -rw-r--r-- 1 casaci root 45 May 25 17:46 work-el7-3.8.tar.gz |
25-May-2024 13:46:17 | Done packaging working directory |
25-May-2024 13:46:17 | Finished task 'Tar work directory' with result: Success |
25-May-2024 13:46:17 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
25-May-2024 13:46:17 | Parsing test results under /export/home/cbt-el7-1/bamboo-home/xml-data/build-dir/CASA-CRT644PLUSPY3100-TTSGRHEL7P38... |
25-May-2024 13:46:17 | Finished task 'Parse tests' with result: Success |
25-May-2024 13:46:17 | Substituting variable: ${bamboo.repository.branch.name} with release/6.6.4 |
25-May-2024 13:46:17 | Starting task 'Upload wheel' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
25-May-2024 13:46:17 | Beginning to execute external process for build 'CASA - CMake Release Test 6.6.4+ Python 3.10 - release-6.6.4 - Test Tools Many Linux 2014 Py3.10 #5 (CASA-CRT644PLUSPY3100-TTSGRHEL7P38-5)' ... running command line: /export/home/cbt-el7-1/bamboo-home/temp/CASA-CRT644PLUSPY3100-TTSGRHEL7P38-5-ScriptBuildTask-1094421605698250729.sh ... in: /export/home/cbt-el7-1/bamboo-home/xml-data/build-dir/CASA-CRT644PLUSPY3100-TTSGRHEL7P38 |
25-May-2024 13:46:18 | Collecting twine |
25-May-2024 13:46:18 | Downloading twine-5.1.0-py3-none-any.whl (38 kB) |
25-May-2024 13:46:18 | Collecting pkginfo>=1.8.1 |
25-May-2024 13:46:18 | Downloading pkginfo-1.10.0-py3-none-any.whl (30 kB) |
25-May-2024 13:46:18 | Collecting rfc3986>=1.4.0 |
25-May-2024 13:46:18 | Downloading rfc3986-2.0.0-py2.py3-none-any.whl (31 kB) |
25-May-2024 13:46:19 | Collecting urllib3>=1.26.0 |
25-May-2024 13:46:19 | Downloading urllib3-2.2.1-py3-none-any.whl (121 kB) |
25-May-2024 13:46:19 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 121.1/121.1 kB 16.6 MB/s eta 0:00:00 |
25-May-2024 13:46:19 | Collecting rich>=12.0.0 |
25-May-2024 13:46:19 | Downloading rich-13.7.1-py3-none-any.whl (240 kB) |
25-May-2024 13:46:19 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 240.7/240.7 kB 31.1 MB/s eta 0:00:00 |
25-May-2024 13:46:19 | Collecting requests-toolbelt!=0.9.0,>=0.8.0 |
25-May-2024 13:46:19 | Downloading requests_toolbelt-1.0.0-py2.py3-none-any.whl (54 kB) |
25-May-2024 13:46:19 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.5/54.5 kB 13.0 MB/s eta 0:00:00 |
25-May-2024 13:46:19 | Collecting requests>=2.20 |
25-May-2024 13:46:19 | Downloading requests-2.32.2-py3-none-any.whl (63 kB) |
25-May-2024 13:46:19 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 63.9/63.9 kB 14.5 MB/s eta 0:00:00 |
25-May-2024 13:46:19 | Collecting importlib-metadata>=3.6 |
25-May-2024 13:46:19 | Downloading importlib_metadata-7.1.0-py3-none-any.whl (24 kB) |
25-May-2024 13:46:19 | Collecting keyring>=15.1 |
25-May-2024 13:46:19 | Downloading keyring-25.2.1-py3-none-any.whl (38 kB) |
25-May-2024 13:46:19 | Collecting readme-renderer>=35.0 |
25-May-2024 13:46:19 | Downloading readme_renderer-43.0-py3-none-any.whl (13 kB) |
25-May-2024 13:46:19 | Collecting zipp>=0.5 |
25-May-2024 13:46:19 | Downloading zipp-3.18.2-py3-none-any.whl (8.3 kB) |
25-May-2024 13:46:19 | Collecting jaraco.context |
25-May-2024 13:46:19 | Downloading jaraco.context-5.3.0-py3-none-any.whl (6.5 kB) |
25-May-2024 13:46:19 | Collecting jaraco.functools |
25-May-2024 13:46:19 | Downloading jaraco.functools-4.0.1-py3-none-any.whl (9.8 kB) |
25-May-2024 13:46:19 | Collecting jeepney>=0.4.2 |
25-May-2024 13:46:19 | Downloading jeepney-0.8.0-py3-none-any.whl (48 kB) |
25-May-2024 13:46:19 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 48.4/48.4 kB 6.2 MB/s eta 0:00:00 |
25-May-2024 13:46:19 | Collecting jaraco.classes |
25-May-2024 13:46:19 | Downloading jaraco.classes-3.4.0-py3-none-any.whl (6.8 kB) |
25-May-2024 13:46:19 | Collecting SecretStorage>=3.2 |
25-May-2024 13:46:20 | Downloading SecretStorage-3.3.3-py3-none-any.whl (15 kB) |
25-May-2024 13:46:20 | Collecting Pygments>=2.5.1 |
25-May-2024 13:46:20 | Downloading pygments-2.18.0-py3-none-any.whl (1.2 MB) |
25-May-2024 13:46:20 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.2/1.2 MB 40.4 MB/s eta 0:00:00 |
25-May-2024 13:46:20 | Collecting nh3>=0.2.14 |
25-May-2024 13:46:20 | Downloading nh3-0.2.17-cp37-abi3-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (777 kB) |
25-May-2024 13:46:20 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 777.1/777.1 kB 37.7 MB/s eta 0:00:00 |
25-May-2024 13:46:20 | Collecting docutils>=0.13.1 |
25-May-2024 13:46:20 | Downloading docutils-0.21.2-py3-none-any.whl (587 kB) |
25-May-2024 13:46:20 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 587.4/587.4 kB 36.3 MB/s eta 0:00:00 |
25-May-2024 13:46:20 | Collecting certifi>=2017.4.17 |
25-May-2024 13:46:20 | Downloading certifi-2024.2.2-py3-none-any.whl (163 kB) |
25-May-2024 13:46:20 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 163.8/163.8 kB 29.0 MB/s eta 0:00:00 |
25-May-2024 13:46:20 | Collecting charset-normalizer<4,>=2 |
25-May-2024 13:46:20 | Downloading charset_normalizer-3.3.2-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (142 kB) |
25-May-2024 13:46:20 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 142.1/142.1 kB 18.8 MB/s eta 0:00:00 |
25-May-2024 13:46:20 | Collecting idna<4,>=2.5 |
25-May-2024 13:46:20 | Downloading idna-3.7-py3-none-any.whl (66 kB) |
25-May-2024 13:46:20 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 66.8/66.8 kB 12.3 MB/s eta 0:00:00 |
25-May-2024 13:46:20 | Collecting markdown-it-py>=2.2.0 |
25-May-2024 13:46:20 | Downloading markdown_it_py-3.0.0-py3-none-any.whl (87 kB) |
25-May-2024 13:46:20 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 87.5/87.5 kB 14.5 MB/s eta 0:00:00 |
25-May-2024 13:46:21 | Collecting mdurl~=0.1 |
25-May-2024 13:46:21 | Downloading mdurl-0.1.2-py3-none-any.whl (10.0 kB) |
25-May-2024 13:46:21 | Collecting cryptography>=2.0 |
25-May-2024 13:46:21 | Downloading cryptography-42.0.7-cp39-abi3-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (3.8 MB) |
25-May-2024 13:46:21 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.8/3.8 MB 35.5 MB/s eta 0:00:00 |
25-May-2024 13:46:21 | Collecting more-itertools |
25-May-2024 13:46:21 | Downloading more_itertools-10.2.0-py3-none-any.whl (57 kB) |
25-May-2024 13:46:21 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 57.0/57.0 kB 11.6 MB/s eta 0:00:00 |
25-May-2024 13:46:21 | Collecting backports.tarfile |
25-May-2024 13:46:21 | Downloading backports.tarfile-1.1.1-py3-none-any.whl (29 kB) |
25-May-2024 13:46:22 | Collecting cffi>=1.12 |
25-May-2024 13:46:22 | Downloading cffi-1.16.0-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (443 kB) |
25-May-2024 13:46:22 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 443.9/443.9 kB 27.0 MB/s eta 0:00:00 |
25-May-2024 13:46:22 | Collecting pycparser |
25-May-2024 13:46:22 | Downloading pycparser-2.22-py3-none-any.whl (117 kB) |
25-May-2024 13:46:22 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 117.6/117.6 kB 19.4 MB/s eta 0:00:00 |
25-May-2024 13:46:22 | Installing collected packages: nh3, zipp, urllib3, rfc3986, Pygments, pycparser, pkginfo, more-itertools, mdurl, jeepney, idna, docutils, charset-normalizer, certifi, backports.tarfile, requests, readme-renderer, markdown-it-py, jaraco.functools, jaraco.context, jaraco.classes, importlib-metadata, cffi, rich, requests-toolbelt, cryptography, SecretStorage, keyring, twine |
25-May-2024 13:46:25 | Successfully installed Pygments-2.18.0 SecretStorage-3.3.3 backports.tarfile-1.1.1 certifi-2024.2.2 cffi-1.16.0 charset-normalizer-3.3.2 cryptography-42.0.7 docutils-0.21.2 idna-3.7 importlib-metadata-7.1.0 jaraco.classes-3.4.0 jaraco.context-5.3.0 jaraco.functools-4.0.1 jeepney-0.8.0 keyring-25.2.1 markdown-it-py-3.0.0 mdurl-0.1.2 more-itertools-10.2.0 nh3-0.2.17 pkginfo-1.10.0 pycparser-2.22 readme-renderer-43.0 requests-2.32.2 requests-toolbelt-1.0.0 rfc3986-2.0.0 rich-13.7.1 twine-5.1.0 urllib3-2.2.1 zipp-3.18.2 |
25-May-2024 13:46:25 | WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv |
25-May-2024 13:46:25 | |
25-May-2024 13:46:25 | [notice] A new release of pip is available: 23.0.1 -> 24.0 |
25-May-2024 13:46:25 | [notice] To update, run: pip3 install --upgrade pip |
25-May-2024 13:46:26 | Requirement already satisfied: pip in /usr/local/lib/python3.10/site-packages (23.0.1) |
25-May-2024 13:46:26 | Collecting pip |
25-May-2024 13:46:26 | Downloading pip-24.0-py3-none-any.whl (2.1 MB) |
25-May-2024 13:46:26 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.1/2.1 MB 31.9 MB/s eta 0:00:00 |
25-May-2024 13:46:26 | Collecting urllib3==1.26.5 |
25-May-2024 13:46:26 | Downloading urllib3-1.26.5-py2.py3-none-any.whl (138 kB) |
25-May-2024 13:46:26 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 138.1/138.1 kB 25.7 MB/s eta 0:00:00 |
25-May-2024 13:46:26 | Requirement already satisfied: twine in /usr/local/lib/python3.10/site-packages (5.1.0) |
25-May-2024 13:46:26 | Requirement already satisfied: requests>=2.20 in /usr/local/lib/python3.10/site-packages (from twine) (2.32.2) |
25-May-2024 13:46:26 | Requirement already satisfied: importlib-metadata>=3.6 in /usr/local/lib/python3.10/site-packages (from twine) (7.1.0) |
25-May-2024 13:46:26 | Requirement already satisfied: keyring>=15.1 in /usr/local/lib/python3.10/site-packages (from twine) (25.2.1) |
25-May-2024 13:46:26 | Requirement already satisfied: pkginfo>=1.8.1 in /usr/local/lib/python3.10/site-packages (from twine) (1.10.0) |
25-May-2024 13:46:26 | Requirement already satisfied: rfc3986>=1.4.0 in /usr/local/lib/python3.10/site-packages (from twine) (2.0.0) |
25-May-2024 13:46:26 | Requirement already satisfied: requests-toolbelt!=0.9.0,>=0.8.0 in /usr/local/lib/python3.10/site-packages (from twine) (1.0.0) |
25-May-2024 13:46:26 | Requirement already satisfied: rich>=12.0.0 in /usr/local/lib/python3.10/site-packages (from twine) (13.7.1) |
25-May-2024 13:46:26 | Requirement already satisfied: readme-renderer>=35.0 in /usr/local/lib/python3.10/site-packages (from twine) (43.0) |
25-May-2024 13:46:26 | Requirement already satisfied: zipp>=0.5 in /usr/local/lib/python3.10/site-packages (from importlib-metadata>=3.6->twine) (3.18.2) |
25-May-2024 13:46:26 | Requirement already satisfied: jaraco.functools in /usr/local/lib/python3.10/site-packages (from keyring>=15.1->twine) (4.0.1) |
25-May-2024 13:46:26 | Requirement already satisfied: jeepney>=0.4.2 in /usr/local/lib/python3.10/site-packages (from keyring>=15.1->twine) (0.8.0) |
25-May-2024 13:46:26 | Requirement already satisfied: jaraco.context in /usr/local/lib/python3.10/site-packages (from keyring>=15.1->twine) (5.3.0) |
25-May-2024 13:46:26 | Requirement already satisfied: SecretStorage>=3.2 in /usr/local/lib/python3.10/site-packages (from keyring>=15.1->twine) (3.3.3) |
25-May-2024 13:46:26 | Requirement already satisfied: jaraco.classes in /usr/local/lib/python3.10/site-packages (from keyring>=15.1->twine) (3.4.0) |
25-May-2024 13:46:26 | Requirement already satisfied: Pygments>=2.5.1 in /usr/local/lib/python3.10/site-packages (from readme-renderer>=35.0->twine) (2.18.0) |
25-May-2024 13:46:26 | Requirement already satisfied: docutils>=0.13.1 in /usr/local/lib/python3.10/site-packages (from readme-renderer>=35.0->twine) (0.21.2) |
25-May-2024 13:46:26 | Requirement already satisfied: nh3>=0.2.14 in /usr/local/lib/python3.10/site-packages (from readme-renderer>=35.0->twine) (0.2.17) |
25-May-2024 13:46:26 | Requirement already satisfied: charset-normalizer<4,>=2 in /usr/local/lib/python3.10/site-packages (from requests>=2.20->twine) (3.3.2) |
25-May-2024 13:46:26 | Requirement already satisfied: certifi>=2017.4.17 in /usr/local/lib/python3.10/site-packages (from requests>=2.20->twine) (2024.2.2) |
25-May-2024 13:46:26 | Requirement already satisfied: idna<4,>=2.5 in /usr/local/lib/python3.10/site-packages (from requests>=2.20->twine) (3.7) |
25-May-2024 13:46:26 | Requirement already satisfied: markdown-it-py>=2.2.0 in /usr/local/lib/python3.10/site-packages (from rich>=12.0.0->twine) (3.0.0) |
25-May-2024 13:46:26 | Requirement already satisfied: mdurl~=0.1 in /usr/local/lib/python3.10/site-packages (from markdown-it-py>=2.2.0->rich>=12.0.0->twine) (0.1.2) |
25-May-2024 13:46:26 | Requirement already satisfied: cryptography>=2.0 in /usr/local/lib/python3.10/site-packages (from SecretStorage>=3.2->keyring>=15.1->twine) (42.0.7) |
25-May-2024 13:46:26 | Requirement already satisfied: more-itertools in /usr/local/lib/python3.10/site-packages (from jaraco.classes->keyring>=15.1->twine) (10.2.0) |
25-May-2024 13:46:26 | Requirement already satisfied: backports.tarfile in /usr/local/lib/python3.10/site-packages (from jaraco.context->keyring>=15.1->twine) (1.1.1) |
25-May-2024 13:46:27 | Requirement already satisfied: cffi>=1.12 in /usr/local/lib/python3.10/site-packages (from cryptography>=2.0->SecretStorage>=3.2->keyring>=15.1->twine) (1.16.0) |
25-May-2024 13:46:27 | Requirement already satisfied: pycparser in /usr/local/lib/python3.10/site-packages (from cffi>=1.12->cryptography>=2.0->SecretStorage>=3.2->keyring>=15.1->twine) (2.22) |
25-May-2024 13:46:27 | Installing collected packages: urllib3, pip |
25-May-2024 13:46:27 | Attempting uninstall: urllib3 |
25-May-2024 13:46:27 | Found existing installation: urllib3 2.2.1 |
25-May-2024 13:46:27 | Uninstalling urllib3-2.2.1: |
25-May-2024 13:46:27 | Successfully uninstalled urllib3-2.2.1 |
25-May-2024 13:46:27 | Attempting uninstall: pip |
25-May-2024 13:46:27 | Found existing installation: pip 23.0.1 |
25-May-2024 13:46:27 | Uninstalling pip-23.0.1: |
25-May-2024 13:46:28 | Successfully uninstalled pip-23.0.1 |
25-May-2024 13:46:29 | Successfully installed pip-24.0 urllib3-1.26.5 |
25-May-2024 13:46:29 | WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv |
25-May-2024 13:46:30 | Cloning into 'casa-build-utils'... |
25-May-2024 13:46:31 | Uploading distributions to |
25-May-2024 13:46:31 | https://casa-pip.nrao.edu:443/repository/casa-test-wheel/ |
25-May-2024 13:46:32 | Uploading |
25-May-2024 13:46:32 | casatools-6.6.4.34-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl |
25-May-2024 13:46:32 | |
25-May-2024 13:46:32 | 0% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 0.0/178.7 MB • --:-- • ? |
25-May-2024 13:46:32 | 2% ╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.3/178.7 MB • 00:04 • 49.0 MB/s |
25-May-2024 13:46:33 | 4% ━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 7.7/178.7 MB • 00:04 • 44.4 MB/s |
25-May-2024 13:46:33 | 6% ━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 10.2/178.7 MB • 00:04 • 47.6 MB/s |
25-May-2024 13:46:33 | 8% ━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 14.5/178.7 MB • 00:05 • 35.7 MB/s |
25-May-2024 13:46:33 | 9% ━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 15.9/178.7 MB • 00:07 • 26.4 MB/s |
25-May-2024 13:46:33 | 11% ━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 19.6/178.7 MB • 00:05 • 32.0 MB/s |
25-May-2024 13:46:33 | 12% ━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 22.3/178.7 MB • 00:07 • 25.2 MB/s |
25-May-2024 13:46:33 | 14% ━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 24.2/178.7 MB • 00:06 • 26.8 MB/s |
25-May-2024 13:46:33 | 15% ━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 27.7/178.7 MB • 00:06 • 26.8 MB/s |
25-May-2024 13:46:33 | 17% ━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 30.7/178.7 MB • 00:06 • 27.9 MB/s |
25-May-2024 13:46:34 | 18% ━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 32.6/178.7 MB • 00:06 • 26.9 MB/s |
25-May-2024 13:46:34 | 19% ━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 34.6/178.7 MB • 00:07 • 22.4 MB/s |
25-May-2024 13:46:34 | 21% ━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 37.9/178.7 MB • 00:06 • 25.5 MB/s |
25-May-2024 13:46:34 | 23% ━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 40.3/178.7 MB • 00:06 • 24.9 MB/s |
25-May-2024 13:46:34 | 24% ━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 42.2/178.7 MB • 00:07 • 21.3 MB/s |
25-May-2024 13:46:34 | 25% ━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 44.8/178.7 MB • 00:06 • 25.7 MB/s |
25-May-2024 13:46:34 | 27% ━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 47.4/178.7 MB • 00:05 • 26.7 MB/s |
25-May-2024 13:46:34 | 28% ━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 49.7/178.7 MB • 00:05 • 27.6 MB/s |
25-May-2024 13:46:34 | 29% ━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 52.3/178.7 MB • 00:06 • 24.9 MB/s |
25-May-2024 13:46:34 | 31% ━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.7/178.7 MB • 00:05 • 25.1 MB/s |
25-May-2024 13:46:35 | 32% ━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━ 58.0/178.7 MB • 00:05 • 28.1 MB/s |
25-May-2024 13:46:35 | 34% ━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━ 60.0/178.7 MB • 00:06 • 22.7 MB/s |
25-May-2024 13:46:35 | 35% ━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━ 62.0/178.7 MB • 00:06 • 22.1 MB/s |
25-May-2024 13:46:35 | 37% ━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━ 65.3/178.7 MB • 00:05 • 26.1 MB/s |
25-May-2024 13:46:35 | 38% ━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━ 67.8/178.7 MB • 00:05 • 25.2 MB/s |
25-May-2024 13:46:35 | 40% ━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━ 70.7/178.7 MB • 00:04 • 32.9 MB/s |
25-May-2024 13:46:35 | 42% ━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━ 74.5/178.7 MB • 00:04 • 32.5 MB/s |
25-May-2024 13:46:35 | 43% ━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━ 77.1/178.7 MB • 00:04 • 28.8 MB/s |
25-May-2024 13:46:35 | 44% ━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━ 79.4/178.7 MB • 00:04 • 28.6 MB/s |
25-May-2024 13:46:36 | 47% ━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━ 83.6/178.7 MB • 00:03 • 33.3 MB/s |
25-May-2024 13:46:36 | 48% ━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━ 85.3/178.7 MB • 00:04 • 26.0 MB/s |
25-May-2024 13:46:36 | 49% ━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━ 88.4/178.7 MB • 00:03 • 32.5 MB/s |
25-May-2024 13:46:36 | 51% ━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━ 91.5/178.7 MB • 00:04 • 25.5 MB/s |
25-May-2024 13:46:36 | 52% ━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━ 93.8/178.7 MB • 00:04 • 27.1 MB/s |
25-May-2024 13:46:36 | 54% ━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━ 96.5/178.7 MB • 00:04 • 26.8 MB/s |
25-May-2024 13:46:36 | 56% ━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━ 100.4/178.7 MB • 00:03 • 27.6 MB/s |
25-May-2024 13:46:36 | 57% ━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━ 102.3/178.7 MB • 00:03 • 27.1 MB/s |
25-May-2024 13:46:36 | 59% ━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━ 104.9/178.7 MB • 00:03 • 32.3 MB/s |
25-May-2024 13:46:36 | 61% ━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━ 108.9/178.7 MB • 00:03 • 31.4 MB/s |
25-May-2024 13:46:37 | 62% ━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━ 110.7/178.7 MB • 00:03 • 26.7 MB/s |
25-May-2024 13:46:37 | 63% ━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━ 113.3/178.7 MB • 00:03 • 27.2 MB/s |
25-May-2024 13:46:37 | 65% ━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━ 117.0/178.7 MB • 00:03 • 27.3 MB/s |
25-May-2024 13:46:37 | 67% ━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━ 120.2/178.7 MB • 00:03 • 29.3 MB/s |
25-May-2024 13:46:37 | 69% ━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━ 122.6/178.7 MB • 00:02 • 29.4 MB/s |
25-May-2024 13:46:37 | 70% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━ 125.4/178.7 MB • 00:02 • 29.1 MB/s |
25-May-2024 13:46:37 | 72% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━ 128.7/178.7 MB • 00:02 • 29.5 MB/s |
25-May-2024 13:46:37 | 74% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━ 131.8/178.7 MB • 00:02 • 31.1 MB/s |
25-May-2024 13:46:37 | 76% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━ 135.2/178.7 MB • 00:02 • 31.8 MB/s |
25-May-2024 13:46:37 | 77% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━ 137.6/178.7 MB • 00:02 • 33.8 MB/s |
25-May-2024 13:46:38 | 78% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━ 140.1/178.7 MB • 00:02 • 27.7 MB/s |
25-May-2024 13:46:38 | 80% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━ 143.1/178.7 MB • 00:02 • 26.0 MB/s |
25-May-2024 13:46:38 | 82% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━ 145.8/178.7 MB • 00:02 • 30.1 MB/s |
25-May-2024 13:46:38 | 83% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━ 149.1/178.7 MB • 00:01 • 34.2 MB/s |
25-May-2024 13:46:38 | 85% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━ 152.1/178.7 MB • 00:01 • 28.8 MB/s |
25-May-2024 13:46:38 | 87% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━ 155.3/178.7 MB • 00:01 • 28.6 MB/s |
25-May-2024 13:46:38 | 89% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━ 158.7/178.7 MB • 00:01 • 31.8 MB/s |
25-May-2024 13:46:38 | 90% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━ 160.8/178.7 MB • 00:01 • 29.9 MB/s |
25-May-2024 13:46:38 | 91% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━ 163.1/178.7 MB • 00:01 • 25.3 MB/s |
25-May-2024 13:46:39 | 93% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━ 166.6/178.7 MB • 00:01 • 25.0 MB/s |
25-May-2024 13:46:39 | 94% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━ 168.7/178.7 MB • 00:01 • 25.2 MB/s |
25-May-2024 13:46:39 | 96% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━ 170.7/178.7 MB • 00:01 • 22.0 MB/s |
25-May-2024 13:46:39 | 98% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺ 174.4/178.7 MB • 00:01 • 25.6 MB/s |
25-May-2024 13:46:39 | 99% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸ 176.7/178.7 MB • 00:01 • 24.9 MB/s |
25-May-2024 13:46:39 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸ 178.7/178.7 MB • 00:01 • 26.1 MB/s |
25-May-2024 13:46:39 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 178.7/178.7 MB • 00:06 • 22.9 MB/s |
25-May-2024 13:46:39 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 178.7/178.7 MB • 00:06 • 22.9 MB/s |
25-May-2024 13:46:39 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 178.7/178.7 MB • 00:06 • 22.9 MB/s |
25-May-2024 13:46:39 | |
25-May-2024 13:46:39 | Finished task 'Upload wheel' with result: Success |
25-May-2024 13:46:39 | Starting task 'Cleanup' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
25-May-2024 13:46:39 | Beginning to execute external process for build 'CASA - CMake Release Test 6.6.4+ Python 3.10 - release-6.6.4 - Test Tools Many Linux 2014 Py3.10 #5 (CASA-CRT644PLUSPY3100-TTSGRHEL7P38-5)' ... running command line: /export/home/cbt-el7-1/bamboo-home/temp/CASA-CRT644PLUSPY3100-TTSGRHEL7P38-5-ScriptBuildTask-8355866132966100162.sh ... in: /export/home/cbt-el7-1/bamboo-home/xml-data/build-dir/CASA-CRT644PLUSPY3100-TTSGRHEL7P38 |
25-May-2024 13:46:39 | Starting cleanup |
25-May-2024 13:46:51 | wheel-container-test |
25-May-2024 13:46:52 | wheel-container-test |
25-May-2024 13:46:52 | Cleanup complete |
25-May-2024 13:46:52 | Finished task 'Cleanup' with result: Success |
25-May-2024 13:46:52 | Running post build plugin 'Docker Container Cleanup' |
25-May-2024 13:46:52 | Beginning to execute external process for build 'CASA - CMake Release Test 6.6.4+ Python 3.10 - release-6.6.4 - Test Tools Many Linux 2014 Py3.10 #5 (CASA-CRT644PLUSPY3100-TTSGRHEL7P38-5)' ... running command line: /bin/docker rm -f wheel-container-test ... in: /export/home/cbt-el7-1/bamboo-home/xml-data/build-dir/CASA-CRT644PLUSPY3100-TTSGRHEL7P38 |
25-May-2024 13:46:53 | Error response from daemon: No such container: wheel-container-test |
25-May-2024 13:46:53 | Running post build plugin 'NCover Results Collector' |
25-May-2024 13:46:53 | Running post build plugin 'Build Results Label Collector' |
25-May-2024 13:46:53 | Running post build plugin 'Clover Results Collector' |
25-May-2024 13:46:53 | Running post build plugin 'npm Cache Cleanup' |
25-May-2024 13:46:53 | Running post build plugin 'Artifact Copier' |
25-May-2024 13:46:53 | Publishing an artifact: Workdir |
25-May-2024 13:46:53 | Finished publishing of artifact Non required job artifact Http Compression On : [Workdir], patterns: [work*.tar.gz] anchored at: [wheeldirectory/] in 128.8 ms |
25-May-2024 13:46:53 | Publishing an artifact: Tests |
25-May-2024 13:46:53 | Finished publishing of artifact Non required job artifact Http Compression On : [Tests], patterns: [*.xml] anchored at: [wheeldirectory/] in 365.1 ms |
25-May-2024 13:46:53 | Publishing an artifact: xml Directories |
25-May-2024 13:46:53 | Finished publishing of artifact Non required job artifact Http Compression On : [xml Directories], patterns: [**/*.xml] anchored at: [wheeldirectory/] in 435.7 ms |
25-May-2024 13:46:53 | Finalising the build... |
25-May-2024 13:46:53 | Stopping timer. |
25-May-2024 13:46:53 | Build CASA-CRT644PLUSPY3100-TTSGRHEL7P38-5 completed. |
25-May-2024 13:46:54 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
25-May-2024 13:46:54 | Running on server: post build plugin 'NCover Results Collector' |
25-May-2024 13:46:54 | Running on server: post build plugin 'Build Labeller' |
25-May-2024 13:46:54 | Running on server: post build plugin 'Clover Delta Calculator' |
25-May-2024 13:46:54 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
25-May-2024 13:46:54 | All post build plugins have finished |
25-May-2024 13:46:54 | Generating build results summary... |
25-May-2024 13:46:54 | Saving build results to disk... |
25-May-2024 13:46:54 | Store variable context... |
25-May-2024 13:46:54 | Finished building CASA-CRT644PLUSPY3100-TTSGRHEL7P38-5. |