Build: #1 was successful
Job: Test Tasks OSX12 was successful
Build log
The build generated 62,250 lines of output.The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ Exception: infiles should be a list of input images for Basket-Weaving. |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa infiles should be a list of input images for Basket-Weaving. |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa Task sdfixscan raised an exception of class Exception with the following message: infiles should be a list of input images for Basket-Weaving. |
| 15-Sep-2023 12:02:12 | test_task_sdfixscan.py::sdfixscan_test0::test001 |
| 15-Sep-2023 12:02:12 | Test 001: only 1 image is given for Basket-Weaving. |
| 15-Sep-2023 12:02:12 | PASSED |
| 15-Sep-2023 12:02:12 | |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa Traceback (most recent call last): |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatasks/private/task_sdfixscan.py", line 46, in sdfixscan |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ worker.initialize() |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatasks/private/task_sdfixscan.py", line 62, in initialize |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ self.parameter_check() |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatasks/private/task_sdfixscan.py", line 135, in parameter_check |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ raise Exception('direction must have at least two different direction.') |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ Exception: direction must have at least two different direction. |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa direction must have at least two different direction. |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa Task sdfixscan raised an exception of class Exception with the following message: direction must have at least two different direction. |
| 15-Sep-2023 12:02:12 | test_task_sdfixscan.py::sdfixscan_test0::test002 |
| 15-Sep-2023 12:02:12 | Test 002: direction is not given for Basket-Weaving. |
| 15-Sep-2023 12:02:12 | PASSED |
| 15-Sep-2023 12:02:12 | |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa Traceback (most recent call last): |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatasks/private/task_sdfixscan.py", line 46, in sdfixscan |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ worker.initialize() |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatasks/private/task_sdfixscan.py", line 62, in initialize |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ self.parameter_check() |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatasks/private/task_sdfixscan.py", line 114, in parameter_check |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ raise Exception("infiles allows only one input file for pressed-out method.") |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ Exception: infiles allows only one input file for pressed-out method. |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa infiles allows only one input file for pressed-out method. |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa Task sdfixscan raised an exception of class Exception with the following message: infiles allows only one input file for pressed-out method. |
| 15-Sep-2023 12:02:12 | test_task_sdfixscan.py::sdfixscan_test0::test003 |
| 15-Sep-2023 12:02:12 | Test 003: Multiple images are given for Press. |
| 15-Sep-2023 12:02:12 | PASSED |
| 15-Sep-2023 12:02:12 | |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa Traceback (most recent call last): |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatasks/private/task_sdfixscan.py", line 46, in sdfixscan |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ worker.initialize() |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatasks/private/task_sdfixscan.py", line 62, in initialize |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ self.parameter_check() |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatasks/private/task_sdfixscan.py", line 120, in parameter_check |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ raise Exception("direction allows only one direction for pressed-out method.") |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ Exception: direction allows only one direction for pressed-out method. |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa direction allows only one direction for pressed-out method. |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa Task sdfixscan raised an exception of class Exception with the following message: direction allows only one direction for pressed-out method. |
| 15-Sep-2023 12:02:12 | test_task_sdfixscan.py::sdfixscan_test0::test004 |
| 15-Sep-2023 12:02:12 | Test 004: direction is not given for Press. |
| 15-Sep-2023 12:02:12 | PASSED |
| 15-Sep-2023 12:02:12 | |
| 15-Sep-2023 12:02:12 | 2023-09-15 16:02:13 SEVERE image::newimagefromimage (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 4129) Exception Reported: sdfixscanTest0.im already exists at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 225 |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa Traceback (most recent call last): |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatasks/private/task_sdfixscan.py", line 47, in sdfixscan |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ worker.execute() |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatasks/private/task_sdfixscan.py", line 143, in execute |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ self.__execute_basket_weaving() |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatasks/private/task_sdfixscan.py", line 347, in __execute_basket_weaving |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ outimage = ia.newimagefromimage( |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatools/image.py", line 4154, in newimagefromimage |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ return _wrap_image(swig_object=self._swigobj.newimagefromimage(infile, outfile, region, mask, dropdeg, overwrite)) |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatools/__casac__/image.py", line 8372, in newimagefromimage |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ return _image.image_newimagefromimage(self, *args, **kwargs) |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa+ RuntimeError: sdfixscanTest0.im already exists at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 225 |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa sdfixscanTest0.im already exists at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 225 |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:13 SEVERE sdfixscan::::casa Task sdfixscan raised an exception of class RuntimeError with the following message: sdfixscanTest0.im already exists at File: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-BPOSX12PY38N/casa6/casatools/src/code/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 225 |
| 15-Sep-2023 12:02:13 | test_task_sdfixscan.py::sdfixscan_test0::test005 |
| 15-Sep-2023 12:02:13 | Test 005: Existing output image file. |
| 15-Sep-2023 12:02:13 | PASSED |
| 15-Sep-2023 12:02:13 | |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:14 SEVERE image::_convolve2d (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 1212) Exception Reported: Gaussian2DParam<T>::setMajorAxis(const T &width) - width must be positive |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:14 SEVERE sdfixscan::::casa Traceback (most recent call last): |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:14 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatasks/private/task_sdfixscan.py", line 47, in sdfixscan |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:14 SEVERE sdfixscan::::casa+ worker.execute() |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:14 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatasks/private/task_sdfixscan.py", line 141, in execute |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:14 SEVERE sdfixscan::::casa+ self.__execute_press() |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:14 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatasks/private/task_sdfixscan.py", line 198, in __execute_press |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:14 SEVERE sdfixscan::::casa+ self.convimage = self.image.convolve2d(outfile=self.tmppolyname, |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:14 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatools/image.py", line 1062, in convolve2d |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:14 SEVERE sdfixscan::::casa+ return _wrap_image(swig_object=self._swigobj.convolve2d(outfile, axes, type, major, minor, pa, scale, region, mask, overwrite, stretch, targetres, beam)) |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:14 SEVERE sdfixscan::::casa+ File "/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/lib/python3.8/site-packages/casatools/__casac__/image.py", line 2314, in convolve2d |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:14 SEVERE sdfixscan::::casa+ return _image.image_convolve2d(self, *args, **kwargs) |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:14 SEVERE sdfixscan::::casa+ RuntimeError: Gaussian2DParam<T>::setMajorAxis(const T &width) - width must be positive |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:14 SEVERE sdfixscan::::casa Gaussian2DParam<T>::setMajorAxis(const T &width) - width must be positive |
| 15-Sep-2023 12:02:13 | 2023-09-15 16:02:14 SEVERE sdfixscan::::casa Task sdfixscan raised an exception of class RuntimeError with the following message: Gaussian2DParam<T>::setMajorAxis(const T &width) - width must be positive |
| 15-Sep-2023 12:02:13 | test_task_sdfixscan.py::sdfixscan_test0::test006 |
| 15-Sep-2023 12:02:13 | Test 006: Zero beamsize for Press. |
| 15-Sep-2023 12:02:13 | PASSED |
| 15-Sep-2023 12:02:13 | |
| 15-Sep-2023 12:02:13 | test_task_sdfixscan.py::sdfixscan_test1::test100 |
| 15-Sep-2023 12:02:13 | Test 100: Pressed method using whole pixels. |
| 15-Sep-2023 12:02:13 | 0 1 |
| 15-Sep-2023 12:02:13 | PASSED |
| 15-Sep-2023 12:02:13 | |
| 15-Sep-2023 12:02:14 | test_task_sdfixscan.py::sdfixscan_test1::test100_2d |
| 15-Sep-2023 12:02:14 | Test 100_2d: Pressed method using whole pixels for 2D image. |
| 15-Sep-2023 12:02:14 | 0 1 |
| 15-Sep-2023 12:02:14 | PASSED |
| 15-Sep-2023 12:02:14 | |
| 15-Sep-2023 12:02:14 | test_task_sdfixscan.py::sdfixscan_test1::test100_3d |
| 15-Sep-2023 12:02:14 | Test 100_3d: Pressed method using whole pixels for 3D image. |
| 15-Sep-2023 12:02:14 | 0 1 |
| 15-Sep-2023 12:02:14 | PASSED |
| 15-Sep-2023 12:02:14 | |
| 15-Sep-2023 12:02:14 | test_task_sdfixscan.py::sdfixscan_test1::test101 |
| 15-Sep-2023 12:02:14 | Test 101: Pressed method with certain threshold. |
| 15-Sep-2023 12:02:14 | 0 1 |
| 15-Sep-2023 12:02:14 | PASSED |
| 15-Sep-2023 12:02:14 | |
| 15-Sep-2023 12:02:15 | test_task_sdfixscan.py::sdfixscan_test1::test102 |
| 15-Sep-2023 12:02:15 | Test 102: Test mask in pressed method using whole pixels. |
| 15-Sep-2023 12:02:15 | 0 1 |
| 15-Sep-2023 12:02:15 | PASSED |
| 15-Sep-2023 12:02:15 | |
| 15-Sep-2023 12:02:15 | test_task_sdfixscan.py::sdfixscan_test2::test200 |
| 15-Sep-2023 12:02:15 | Test 200: FFT based Basket-Weaving using whole pixels. |
| 15-Sep-2023 12:02:15 | 0 1 |
| 15-Sep-2023 12:02:15 | PASSED |
| 15-Sep-2023 12:02:15 | |
| 15-Sep-2023 12:02:15 | test_task_sdfixscan.py::sdfixscan_test2::test200_2d |
| 15-Sep-2023 12:02:15 | Test 200_2d: FFT based Basket-Weaving using whole pixels for 2D image. |
| 15-Sep-2023 12:02:15 | 0 1 |
| 15-Sep-2023 12:02:15 | PASSED |
| 15-Sep-2023 12:02:15 | |
| 15-Sep-2023 12:02:16 | test_task_sdfixscan.py::sdfixscan_test2::test200_3d |
| 15-Sep-2023 12:02:16 | Test 200_3d: FFT based Basket-Weaving using whole pixels for 3D image. |
| 15-Sep-2023 12:02:16 | 0 1 |
| 15-Sep-2023 12:02:16 | PASSED |
| 15-Sep-2023 12:02:16 | |
| 15-Sep-2023 12:02:16 | test_task_sdfixscan.py::sdfixscan_test2::test201 |
| 15-Sep-2023 12:02:16 | Test 201: FFT based Basket-Weaving with certain threshold. |
| 15-Sep-2023 12:02:16 | 0 1 |
| 15-Sep-2023 12:02:16 | PASSED |
| 15-Sep-2023 12:02:16 | |
| 15-Sep-2023 12:02:16 | test_task_sdfixscan.py::sdfixscan_test2::test202 |
| 15-Sep-2023 12:02:16 | Test 202: Test mask in FFT based Basket-Weaving using whole pixels. |
| 15-Sep-2023 12:02:16 | 0 1 |
| 15-Sep-2023 12:02:16 | PASSED |
| 15-Sep-2023 12:02:16 | |
| 15-Sep-2023 12:02:17 | test_task_sdfixscan.py::sdfixscan_test2::test203 |
| 15-Sep-2023 12:02:17 | Test 203: test for len(infiles) > len(direction). |
| 15-Sep-2023 12:02:17 | 0 1 |
| 15-Sep-2023 12:02:17 | PASSED |
| 15-Sep-2023 12:02:17 | |
| 15-Sep-2023 12:02:17 | - generated xml file: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_sdfixscan/nose.xml - |
| 15-Sep-2023 12:02:17 | ======================== 18 passed, 1 warning in 8.70s ========================= |
| 15-Sep-2023 12:02:17 | ============================= test session starts ============================== |
| 15-Sep-2023 12:02:17 | platform darwin -- Python 3.8.13, pytest-7.4.2, pluggy-1.3.0 -- /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/bin/python |
| 15-Sep-2023 12:02:17 | cachedir: .pytest_cache |
| 15-Sep-2023 12:02:17 | rootdir: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_sdfit |
| 15-Sep-2023 12:02:17 | configfile: pytest.ini |
| 15-Sep-2023 12:02:18 | collecting ... collected 43 items |
| 15-Sep-2023 12:02:18 | |
| 15-Sep-2023 12:02:18 | |
| 15-Sep-2023 12:02:19 | 2023-09-15 16:02:20 WARN sdfit::SingleDishMS::fitLine (file /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-BPOSX12PY38N/casa6/casatools/src/code/singledish/SingleDish/SingleDishMS.cc, line 2442) Fitter did not converge on any fit components. |
| 15-Sep-2023 12:02:20 | 2023-09-15 16:02:20 WARN sdfit::SingleDishMS::fitLine (file /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-BPOSX12PY38N/casa6/casatools/src/code/singledish/SingleDish/SingleDishMS.cc, line 2442) Fitter did not converge on any fit components. |
| 15-Sep-2023 12:02:20 | test_task_sdfit.py::sdfit_basicTest::test000 |
| 15-Sep-2023 12:02:20 | Basic Test 000: default values for all parameters (nfit=[0] : no fitting). |
| 15-Sep-2023 12:02:20 | PASSED |
| 15-Sep-2023 12:02:20 | |
| 15-Sep-2023 12:02:21 | test_task_sdfit.py::sdfit_basicTest::test001 |
| 15-Sep-2023 12:02:21 | Basic Test 001: fitting with single line profile (spw='0,1,2', nfit=[1]). |
| 15-Sep-2023 12:02:21 | testing gaussian profile... |
| 15-Sep-2023 12:02:21 | testing lorentzian profile... |
| 15-Sep-2023 12:02:21 | PASSED |
| 15-Sep-2023 12:02:21 | |
| 15-Sep-2023 12:02:22 | test_task_sdfit.py::sdfit_basicTest::test002 |
| 15-Sep-2023 12:02:22 | Basic Test 002: fitting with double fitrange (spw='3', nfit=[1,1]). |
| 15-Sep-2023 12:02:22 | testing gaussian profile... |
| 15-Sep-2023 12:02:22 | testing lorentzian profile... |
| 15-Sep-2023 12:02:22 | PASSED |
| 15-Sep-2023 12:02:22 | |
| 15-Sep-2023 12:02:23 | test_task_sdfit.py::sdfit_basicTest::test003 |
| 15-Sep-2023 12:02:23 | Basic Test 003: fitting with double lines (spw='3', nfit=[2]). |
| 15-Sep-2023 12:02:23 | testing gaussian profile... |
| 15-Sep-2023 12:02:23 | testing lorentzian profile... |
| 15-Sep-2023 12:02:23 | PASSED |
| 15-Sep-2023 12:02:23 | |
| 15-Sep-2023 12:02:25 | test_task_sdfit.py::sdfit_basicTest::test004 |
| 15-Sep-2023 12:02:25 | Basic Test 004: fitting negative line profile with single line model (spw='0,1,2', nfit=[1]). |
| 15-Sep-2023 12:02:25 | testing gaussian profile... |
| 15-Sep-2023 12:02:25 | testing lorentzian profile... |
| 15-Sep-2023 12:02:25 | PASSED |
| 15-Sep-2023 12:02:25 | |
| 15-Sep-2023 12:02:26 | test_task_sdfit.py::sdfit_basicTest::test005 |
| 15-Sep-2023 12:02:26 | Basic Test 005: fitting with double fitrange (spw='3', nfit=[1,1]). |
| 15-Sep-2023 12:02:26 | testing gaussian profile... |
| 15-Sep-2023 12:02:26 | testing lorentzian profile... |
| 15-Sep-2023 12:02:26 | PASSED |
| 15-Sep-2023 12:02:26 | |
| 15-Sep-2023 12:02:29 | test_task_sdfit.py::sdfit_basicTest::test006 |
| 15-Sep-2023 12:02:29 | Basic Test 006: fitting with double line profiles (spw='3', nfit=[2]). |
| 15-Sep-2023 12:02:29 | testing gaussian profile... |
| 15-Sep-2023 12:02:29 | testing lorentzian profile... |
| 15-Sep-2023 12:02:29 | PASSED |
| 15-Sep-2023 12:02:29 | |
| 15-Sep-2023 12:02:47 | test_task_sdfit.py::sdfit_selection::testAntennaC |
| 15-Sep-2023 12:02:47 | Test selection by antenna (corrected). |
| 15-Sep-2023 12:02:47 | PASSED |
| 15-Sep-2023 12:02:47 | |
| 15-Sep-2023 12:02:50 | test_task_sdfit.py::sdfit_selection::testAntennaF |
| 15-Sep-2023 12:02:50 | Test selection by antenna (float_data). |
| 15-Sep-2023 12:02:50 | PASSED |
| 15-Sep-2023 12:02:50 | |
| 15-Sep-2023 12:02:54 | test_task_sdfit.py::sdfit_selection::testFieldC |
| 15-Sep-2023 12:02:54 | Test selection by field (corrected). |
| 15-Sep-2023 12:02:54 | PASSED |
| 15-Sep-2023 12:02:54 | |
| 15-Sep-2023 12:02:56 | test_task_sdfit.py::sdfit_selection::testFieldF |
| 15-Sep-2023 12:02:56 | Test selection by field (float_data). |
| 15-Sep-2023 12:02:56 | PASSED |
| 15-Sep-2023 12:02:56 | |
| 15-Sep-2023 12:02:59 | test_task_sdfit.py::sdfit_selection::testIntentC |
| 15-Sep-2023 12:02:59 | Test selection by intent (corrected). |
| 15-Sep-2023 12:02:59 | PASSED |
| 15-Sep-2023 12:02:59 | |
| 15-Sep-2023 12:03:03 | test_task_sdfit.py::sdfit_selection::testIntentF |
| 15-Sep-2023 12:03:03 | Test selection by intent (float_data). |
| 15-Sep-2023 12:03:03 | PASSED |
| 15-Sep-2023 12:03:03 | |
| 15-Sep-2023 12:03:10 | test_task_sdfit.py::sdfit_selection::testPolC |
| 15-Sep-2023 12:03:10 | Test selection by pol (corrected). |
| 15-Sep-2023 12:03:10 | PASSED |
| 15-Sep-2023 12:03:10 | |
| 15-Sep-2023 12:03:16 | test_task_sdfit.py::sdfit_selection::testPolF |
| 15-Sep-2023 12:03:16 | Test selection by pol (float_data). |
| 15-Sep-2023 12:03:16 | PASSED |
| 15-Sep-2023 12:03:16 | |
| 15-Sep-2023 12:03:21 | test_task_sdfit.py::sdfit_selection::testScanC |
| 15-Sep-2023 12:03:21 | Test selection by scan (corrected). |
| 15-Sep-2023 12:03:21 | PASSED |
| 15-Sep-2023 12:03:21 | |
| 15-Sep-2023 12:03:23 | test_task_sdfit.py::sdfit_selection::testScanF |
| 15-Sep-2023 12:03:23 | Test selection by scan (float_data). |
| 15-Sep-2023 12:03:23 | PASSED |
| 15-Sep-2023 12:03:23 | |
| 15-Sep-2023 12:03:26 | test_task_sdfit.py::sdfit_selection::testSpwC |
| 15-Sep-2023 12:03:26 | Test selection by spw (corrected). |
| 15-Sep-2023 12:03:26 | PASSED |
| 15-Sep-2023 12:03:26 | |
| 15-Sep-2023 12:03:35 | test_task_sdfit.py::sdfit_selection::testSpwF |
| 15-Sep-2023 12:03:35 | Test selection by spw (float_data). |
| 15-Sep-2023 12:03:35 | PASSED |
| 15-Sep-2023 12:03:35 | |
| 15-Sep-2023 12:03:38 | test_task_sdfit.py::sdfit_selection::testTimerangeC |
| 15-Sep-2023 12:03:38 | Test selection by timerange (corrected). |
| 15-Sep-2023 12:03:38 | PASSED |
| 15-Sep-2023 12:03:38 | |
| 15-Sep-2023 12:03:55 | test_task_sdfit.py::sdfit_selection::testTimerangeF |
| 15-Sep-2023 12:03:55 | Test selection by timerange (float_data). |
| 15-Sep-2023 12:03:55 | PASSED |
| 15-Sep-2023 12:03:55 | |
| 15-Sep-2023 12:04:04 | test_task_sdfit.py::sdfit_auto::testAuto |
| 15-Sep-2023 12:04:04 | Test fitmode='auto' with default parameters. |
| 15-Sep-2023 12:04:04 | PASSED |
| 15-Sep-2023 12:04:04 | |
| 15-Sep-2023 12:04:08 | test_task_sdfit.py::sdfit_auto::testAutoEdge |
| 15-Sep-2023 12:04:08 | Test fitmode='auto' with edge. |
| 15-Sep-2023 12:04:08 | PASSED |
| 15-Sep-2023 12:04:08 | |
| 15-Sep-2023 12:04:11 | test_task_sdfit.py::sdfit_auto::testAutoFlag |
| 15-Sep-2023 12:04:11 | Test fitmode='auto' of flagged data. |
| 15-Sep-2023 12:04:11 | PASSED |
| 15-Sep-2023 12:04:11 | |
| 15-Sep-2023 12:04:14 | test_task_sdfit.py::sdfit_auto::testAutoMask |
| 15-Sep-2023 12:04:14 | Test fitmode='auto' with line mask by spw parameter. |
| 15-Sep-2023 12:04:14 | PASSED |
| 15-Sep-2023 12:04:14 | |
| 15-Sep-2023 12:04:17 | test_task_sdfit.py::sdfit_auto::testAutoMinwidth |
| 15-Sep-2023 12:04:17 | Test fitmode='auto' with minwidth. |
| 15-Sep-2023 12:04:17 | PASSED |
| 15-Sep-2023 12:04:17 | |
| 15-Sep-2023 12:04:21 | test_task_sdfit.py::sdfit_auto::testAutoThres |
| 15-Sep-2023 12:04:21 | Test fitmode='auto' with threshold. |
| 15-Sep-2023 12:04:21 | PASSED |
| 15-Sep-2023 12:04:21 | |
| 15-Sep-2023 12:04:33 | test_task_sdfit.py::sdfit_timeaverage::testAverage2 |
| 15-Sep-2023 12:04:33 | Test timebin='0.2s' : averaging 2 spectra. |
| 15-Sep-2023 12:04:33 | PASSED |
| 15-Sep-2023 12:04:33 | |
| 15-Sep-2023 12:04:34 | test_task_sdfit.py::sdfit_timeaverage::testAverage4 |
| 15-Sep-2023 12:04:34 | Test timebin='0.4s' : averaging 4 spectra. |
| 15-Sep-2023 12:04:34 | PASSED |
| 15-Sep-2023 12:04:34 | |
| 15-Sep-2023 12:04:37 | test_task_sdfit.py::sdfit_timeaverage::testTimebinNullString |
| 15-Sep-2023 12:04:37 | Test timebin='' : no averaging (default). |
| 15-Sep-2023 12:04:37 | PASSED |
| 15-Sep-2023 12:04:37 | |
| 15-Sep-2023 12:04:42 | test_task_sdfit.py::sdfit_timeaverage::testTimespanField |
| 15-Sep-2023 12:04:42 | Test timespan='field' : averaging across FIELD_ID border. |
| 15-Sep-2023 12:04:42 | PASSED |
| 15-Sep-2023 12:04:42 | |
| 15-Sep-2023 12:04:44 | test_task_sdfit.py::sdfit_timeaverage::testTimespanScan |
| 15-Sep-2023 12:04:44 | Test timespan='scan' : averaging across SCAN_NUMBER border. |
| 15-Sep-2023 12:04:44 | PASSED |
| 15-Sep-2023 12:04:44 | |
| 15-Sep-2023 12:04:46 | test_task_sdfit.py::sdfit_timeaverage::testTimespanScanField |
| 15-Sep-2023 12:04:46 | Test timespan='scan,field' : averaging across SCAN_NUMBER and FIELD_ID borders. |
| 15-Sep-2023 12:04:46 | PASSED |
| 15-Sep-2023 12:04:46 | |
| 15-Sep-2023 12:04:48 | test_task_sdfit.py::sdfit_timeaverage::testTimespanScanState |
| 15-Sep-2023 12:04:48 | Test timespan='scan,state' : averaging across SCAN_NUMBER and STATE_ID borders. |
| 15-Sep-2023 12:04:48 | PASSED |
| 15-Sep-2023 12:04:48 | |
| 15-Sep-2023 12:04:51 | test_task_sdfit.py::sdfit_timeaverage::testTimespanScanStateField |
| 15-Sep-2023 12:04:51 | Test timespan='scan,state,field' : averaging across SCAN_NUMBER, STATE_ID and FIELD_ID borders. |
| 15-Sep-2023 12:04:51 | PASSED |
| 15-Sep-2023 12:04:51 | |
| 15-Sep-2023 12:04:53 | test_task_sdfit.py::sdfit_timeaverage::testTimespanState |
| 15-Sep-2023 12:04:53 | Test timespan='state' : averaging across STATE_ID border. |
| 15-Sep-2023 12:04:53 | PASSED |
| 15-Sep-2023 12:04:53 | |
| 15-Sep-2023 12:04:57 | 2023-09-15 16:04:58 WARN sdfit::MSTransformManager::parseTimeAvgParams Operating with ALMA data, automatically adding state to timespan |
| 15-Sep-2023 12:04:57 | 2023-09-15 16:04:58 WARN sdfit::MSTransformManager::parseTimeAvgParams+ In order to remove sub-scan boundaries which limit time average to 30s |
| 15-Sep-2023 12:04:59 | test_task_sdfit.py::sdfit_timeaverage::testTimespanStateAutoAdded |
| 15-Sep-2023 12:04:59 | Test timespan='scan,field' : to see if 'state' is automatically added to timespan. |
| 15-Sep-2023 12:04:59 | PASSED |
| 15-Sep-2023 12:04:59 | |
| 15-Sep-2023 12:05:11 | test_task_sdfit.py::sdfit_timeaverage::testTimespanStateField |
| 15-Sep-2023 12:05:11 | Test timespan='state,field' : averaging across STATE_ID and FIELD_ID borders. |
| 15-Sep-2023 12:05:11 | PASSED |
| 15-Sep-2023 12:05:11 | |
| 15-Sep-2023 12:05:11 | test_task_sdfit.py::sdfit_polaverage::test_polaverage_default |
| 15-Sep-2023 12:05:11 | test_polaverage_default: test default case (no averaging). |
| 15-Sep-2023 12:05:11 | Editing weight |
| 15-Sep-2023 12:05:11 | irow = 0 |
| 15-Sep-2023 12:05:11 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:11 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:11 | irow = 1 |
| 15-Sep-2023 12:05:11 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:11 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:11 | irow = 2 |
| 15-Sep-2023 12:05:11 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:11 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:11 | irow = 3 |
| 15-Sep-2023 12:05:11 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:11 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:11 | mode='' |
| 15-Sep-2023 12:05:11 | result='{'cent': [[[3999.98803711, 0.15421987]], [[4999.96337891, 0.07064788]]], 'peak': [[[9.98891068, 0.00627893]], [[9.99998951, 0.01441397]]], 'fwhm': [[[500.51101685, 0.36390913]], [[99.96884918, 0.16648979]]], 'nfit': [1, 1]}' |
| 15-Sep-2023 12:05:11 | PASSED |
| 15-Sep-2023 12:05:11 | |
| 15-Sep-2023 12:05:11 | test_task_sdfit.py::sdfit_polaverage::test_polaverage_geometric |
| 15-Sep-2023 12:05:11 | test_polaverage_geometric: test geometric average mode. |
| 15-Sep-2023 12:05:11 | Editing weight |
| 15-Sep-2023 12:05:11 | irow = 0 |
| 15-Sep-2023 12:05:11 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:11 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:11 | irow = 1 |
| 15-Sep-2023 12:05:11 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:11 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:11 | irow = 2 |
| 15-Sep-2023 12:05:11 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:11 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:11 | irow = 3 |
| 15-Sep-2023 12:05:11 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:11 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:11 | mode='geometric' |
| 15-Sep-2023 12:05:11 | result='{'cent': [[[3999.95483398, 0.33952388], [4999.89746094, 0.0805333]]], 'peak': [[[3.333184, 0.0046269], [6.67215729, 0.0109697]]], 'fwhm': [[[499.31900024, 0.80559027], [99.90697479, 0.18978359]]], 'nfit': [2]}' |
| 15-Sep-2023 12:05:11 | cent (result)=[3999.95483398 4999.89746094] |
| 15-Sep-2023 12:05:11 | cent (expected)=[4000. 5000.] |
| 15-Sep-2023 12:05:11 | fwhm (result)=[499.31900024 99.90697479] |
| 15-Sep-2023 12:05:11 | fwhm (expected)=[500. 100.] |
| 15-Sep-2023 12:05:11 | peak (result)=[3.333184 6.67215729] |
| 15-Sep-2023 12:05:11 | peak (expected)=[3.33333333 6.66666667] |
| 15-Sep-2023 12:05:11 | PASSED |
| 15-Sep-2023 12:05:11 | |
| 15-Sep-2023 12:05:12 | test_task_sdfit.py::sdfit_polaverage::test_polaverage_geometric_chunk |
| 15-Sep-2023 12:05:12 | test_polaverage_geometric_chunk: test geometric average mode against different access pattern. |
| 15-Sep-2023 12:05:12 | Editing weight |
| 15-Sep-2023 12:05:12 | irow = 0 |
| 15-Sep-2023 12:05:12 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:12 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:12 | irow = 1 |
| 15-Sep-2023 12:05:12 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:12 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:12 | irow = 2 |
| 15-Sep-2023 12:05:12 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:12 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:12 | irow = 3 |
| 15-Sep-2023 12:05:12 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:12 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:12 | mode='geometric' |
| 15-Sep-2023 12:05:12 | result='{'nfit': [2], 'cent': [[[3999.95483398, 0.33952388], [4999.89746094, 0.0805333]]], 'fwhm': [[[499.31900024, 0.80559027], [99.90697479, 0.18978359]]], 'peak': [[[3.333184, 0.0046269], [6.67215729, 0.0109697]]]}' |
| 15-Sep-2023 12:05:12 | cent (result)=[3999.95483398 4999.89746094] |
| 15-Sep-2023 12:05:12 | cent (expected)=[4000. 5000.] |
| 15-Sep-2023 12:05:12 | fwhm (result)=[499.31900024 99.90697479] |
| 15-Sep-2023 12:05:12 | fwhm (expected)=[500. 100.] |
| 15-Sep-2023 12:05:12 | peak (result)=[3.333184 6.67215729] |
| 15-Sep-2023 12:05:12 | peak (expected)=[3.33333333 6.66666667] |
| 15-Sep-2023 12:05:12 | mode='geometric' |
| 15-Sep-2023 12:05:12 | result='{'nfit': [2], 'cent': [[[1999.99682617, 0.01632784], [2999.98193359, 0.07168895]]], 'fwhm': [[[4.04952955, 0.03844952], [20.25019455, 0.1690107]]], 'peak': [[[6.67678499, 0.054901], [3.30821872, 0.02388908]]]}' |
| 15-Sep-2023 12:05:12 | cent (result)=[1999.99682617 2999.98193359] |
| 15-Sep-2023 12:05:12 | cent (expected)=[2000. 3000.] |
| 15-Sep-2023 12:05:12 | fwhm (result)=[ 4.04952955 20.25019455] |
| 15-Sep-2023 12:05:12 | fwhm (expected)=[ 4. 20.] |
| 15-Sep-2023 12:05:12 | peak (result)=[6.67678499 3.30821872] |
| 15-Sep-2023 12:05:12 | peak (expected)=[6.66666667 3.33333333] |
| 15-Sep-2023 12:05:12 | PASSED |
| 15-Sep-2023 12:05:12 | |
| 15-Sep-2023 12:05:12 | test_task_sdfit.py::sdfit_polaverage::test_polaverage_stokes |
| 15-Sep-2023 12:05:12 | test_polaverage_stokes: test stokes average mode. |
| 15-Sep-2023 12:05:12 | Editing weight |
| 15-Sep-2023 12:05:12 | irow = 0 |
| 15-Sep-2023 12:05:12 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:12 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:12 | irow = 1 |
| 15-Sep-2023 12:05:12 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:12 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:12 | irow = 2 |
| 15-Sep-2023 12:05:12 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:12 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:12 | irow = 3 |
| 15-Sep-2023 12:05:12 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:12 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:12 | mode='stokes' |
| 15-Sep-2023 12:05:12 | result='{'cent': [[[3999.96899414, 0.21372241], [4999.83251953, 0.10374781]]], 'peak': [[[4.99722147, 0.00435965], [5.00837851, 0.01061607]]], 'fwhm': [[[499.88922119, 0.50524592], [99.83950806, 0.24461892]]], 'nfit': [2]}' |
| 15-Sep-2023 12:05:12 | cent (result)=[3999.96899414 4999.83251953] |
| 15-Sep-2023 12:05:12 | cent (expected)=[4000. 5000.] |
| 15-Sep-2023 12:05:12 | fwhm (result)=[499.88922119 99.83950806] |
| 15-Sep-2023 12:05:12 | fwhm (expected)=[500. 100.] |
| 15-Sep-2023 12:05:12 | peak (result)=[4.99722147 5.00837851] |
| 15-Sep-2023 12:05:12 | peak (expected)=[5. 5.] |
| 15-Sep-2023 12:05:12 | PASSED |
| 15-Sep-2023 12:05:12 | |
| 15-Sep-2023 12:05:12 | test_task_sdfit.py::sdfit_polaverage::test_polaverage_stokes_chunk |
| 15-Sep-2023 12:05:12 | test_polaverage_stokes_chunk: test stokes average mode against different access pattern. |
| 15-Sep-2023 12:05:12 | Editing weight |
| 15-Sep-2023 12:05:12 | irow = 0 |
| 15-Sep-2023 12:05:12 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:12 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:12 | irow = 1 |
| 15-Sep-2023 12:05:12 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:12 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:12 | irow = 2 |
| 15-Sep-2023 12:05:12 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:12 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:12 | irow = 3 |
| 15-Sep-2023 12:05:12 | weight (before) [1. 1.] |
| 15-Sep-2023 12:05:12 | weight (after) [1. 2.] |
| 15-Sep-2023 12:05:12 | mode='stokes' |
| 15-Sep-2023 12:05:12 | result='{'nfit': [2], 'cent': [[[3999.96899414, 0.21372241], [4999.83251953, 0.10374781]]], 'fwhm': [[[499.88922119, 0.50524592], [99.83950806, 0.24461892]]], 'peak': [[[4.99722147, 0.00435965], [5.00837851, 0.01061607]]]}' |
| 15-Sep-2023 12:05:12 | cent (result)=[3999.96899414 4999.83251953] |
| 15-Sep-2023 12:05:12 | cent (expected)=[4000. 5000.] |
| 15-Sep-2023 12:05:12 | fwhm (result)=[499.88922119 99.83950806] |
| 15-Sep-2023 12:05:12 | fwhm (expected)=[500. 100.] |
| 15-Sep-2023 12:05:12 | peak (result)=[4.99722147 5.00837851] |
| 15-Sep-2023 12:05:12 | peak (expected)=[5. 5.] |
| 15-Sep-2023 12:05:12 | mode='stokes' |
| 15-Sep-2023 12:05:12 | result='{'nfit': [2], 'cent': [[[1999.99987793, 0.01948669], [2999.95776367, 0.0461983]]], 'fwhm': [[[4.05494213, 0.04588789], [20.13728714, 0.1088557]]], 'peak': [[[5.0189209, 0.04918727], [4.98285151, 0.02331541]]]}' |
| 15-Sep-2023 12:05:12 | cent (result)=[1999.99987793 2999.95776367] |
| 15-Sep-2023 12:05:12 | cent (expected)=[2000. 3000.] |
| 15-Sep-2023 12:05:12 | fwhm (result)=[ 4.05494213 20.13728714] |
| 15-Sep-2023 12:05:12 | fwhm (expected)=[ 4. 20.] |
| 15-Sep-2023 12:05:12 | peak (result)=[5.0189209 4.98285151] |
| 15-Sep-2023 12:05:12 | peak (expected)=[5. 5.] |
| 15-Sep-2023 12:05:12 | PASSED |
| 15-Sep-2023 12:05:12 | |
| 15-Sep-2023 12:05:12 | - generated xml file: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_sdfit/nose.xml - |
| 15-Sep-2023 12:05:12 | ================== 43 passed, 1 warning in 175.24s (0:02:55) =================== |
| 15-Sep-2023 12:05:13 | ============================= test session starts ============================== |
| 15-Sep-2023 12:05:13 | platform darwin -- Python 3.8.13, pytest-7.4.2, pluggy-1.3.0 -- /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/bin/python |
| 15-Sep-2023 12:05:13 | cachedir: .pytest_cache |
| 15-Sep-2023 12:05:13 | rootdir: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_importuvfits |
| 15-Sep-2023 12:05:13 | configfile: pytest.ini |
| 15-Sep-2023 12:05:20 | collecting ... collected 15 items |
| 15-Sep-2023 12:05:20 | |
| 15-Sep-2023 12:05:20 | |
| 15-Sep-2023 12:05:25 | test_task_importuvfits.py::importuvfits_test::test_carmaNewName |
| 15-Sep-2023 12:05:25 | test_carmaNewName: Tests to make sure the antnamescheme new functions on CARMA data |
| 15-Sep-2023 12:05:25 | PASSED |
| 15-Sep-2023 12:05:25 | |
| 15-Sep-2023 12:05:28 | test_task_importuvfits.py::importuvfits_test::test_carmaOldName |
| 15-Sep-2023 12:05:28 | test_carmaOldName: Tests to make sure the antnamescheme old functions on CARMA data |
| 15-Sep-2023 12:05:28 | PASSED |
| 15-Sep-2023 12:05:28 | |
| 15-Sep-2023 12:05:38 | 2023-09-15 16:05:39 WARN MSFitsInput::fillAntennaTable EVLA there is at least one gap in the antenna sequence found in the FITS AN table. Empty rows will be inserted into the ANTENNA table representing the gaps. |
| 15-Sep-2023 12:05:39 | test_task_importuvfits.py::importuvfits_test::test_evlaNewName |
| 15-Sep-2023 12:05:39 | test_evlaNewName: Tests to make sure the antnamescheme new functions on EVLA/JVLA data |
| 15-Sep-2023 12:05:39 | PASSED |
| 15-Sep-2023 12:05:39 | |
| 15-Sep-2023 12:05:42 | 2023-09-15 16:05:42 WARN MSFitsInput::fillAntennaTable EVLA there is at least one gap in the antenna sequence found in the FITS AN table. Empty rows will be inserted into the ANTENNA table representing the gaps. |
| 15-Sep-2023 12:05:42 | test_task_importuvfits.py::importuvfits_test::test_evlaOldName |
| 15-Sep-2023 12:05:42 | test_evlaOldName: Tests to make sure the antnamescheme old functions on EVLA/JVLA data |
| 15-Sep-2023 12:05:42 | PASSED |
| 15-Sep-2023 12:05:42 | |
| 15-Sep-2023 12:05:42 | test_task_importuvfits.py::importuvfits_test::test_invalidinput |
| 15-Sep-2023 12:05:42 | test_invalidinput: Tests to see if the given fits file is valid, or if given an invalid filename |
| 15-Sep-2023 12:05:42 | PASSED |
| 15-Sep-2023 12:05:42 | |
| 15-Sep-2023 12:05:43 | 2023-09-15 16:05:43 WARN MSFitsInput::fillAntennaTable XYZHAND keyword not found in AN table. Will assume antenna coordinate system is right handed. |
| 15-Sep-2023 12:05:43 | test_task_importuvfits.py::importuvfits_test::test_make |
| 15-Sep-2023 12:05:43 | test_make: Tests to make sure a valid ms is created |
| 15-Sep-2023 12:05:43 | PASSED |
| 15-Sep-2023 12:05:43 | |
| 15-Sep-2023 12:05:45 | 2023-09-15 16:05:46 WARN MSFitsInput::fillAntennaTable EVLA there is at least one gap in the antenna sequence found in the FITS AN table. Empty rows will be inserted into the ANTENNA table representing the gaps. |
| 15-Sep-2023 12:05:46 | test_task_importuvfits.py::importuvfits_test::test_negToFlag |
| 15-Sep-2023 12:05:46 | test_negToFlag: Tests that FLAG is set to True when the WEIGHT in the fits file was negative |
| 15-Sep-2023 12:05:46 | PASSED |
| 15-Sep-2023 12:05:46 | |
| 15-Sep-2023 12:05:47 | 2023-09-15 16:05:47 WARN MSFitsInput::fillAntennaTable XYZHAND keyword not found in AN table. Will assume antenna coordinate system is right handed. |
| 15-Sep-2023 12:05:47 | 2023-09-15 16:05:47 SEVERE MSFitsInput::MSFitsInput Error in output file: File test_set.ms exists, and the user does not want to remove it. |
| 15-Sep-2023 12:05:47 | 2023-09-15 16:05:47 SEVERE ms::fromfits 2023-09-15 16:05:47 SEVERE MSFitsInput::MSFitsInput Error in output file: File test_set.ms exists, and the user does not want to remove it. |
| 15-Sep-2023 12:05:47 | 2023-09-15 16:05:47 SEVERE importuvfits::::casa Task importuvfits raised an exception of class RuntimeError with the following message: 2023-09-15 16:05:47 SEVERE MSFitsInput::MSFitsInput Error in output file: File test_set.ms exists, and the user does not want to remove it. |
| 15-Sep-2023 12:05:47 | test_task_importuvfits.py::importuvfits_test::test_overwrite |
| 15-Sep-2023 12:05:47 | test_overwrite: Tests to make sure files aren't overwritten |
| 15-Sep-2023 12:05:47 | PASSED |
| 15-Sep-2023 12:05:47 | |
| 15-Sep-2023 12:05:47 | 2023-09-15 16:05:48 WARN MSFitsInput::fillExtraTable No systemic velocity for field 0 |
| 15-Sep-2023 12:05:47 | 2023-09-15 16:05:48 WARN MSFitsInput::fillExtraTable No rest frequency for field 0 |
| 15-Sep-2023 12:05:47 | 2023-09-15 16:05:48 WARN MSFitsInput::fillExtraTable No systemic velocity for field 0 |
| 15-Sep-2023 12:05:47 | 2023-09-15 16:05:48 WARN MSFitsInput::fillExtraTable No rest frequency for field 0 |
| 15-Sep-2023 12:05:47 | test_task_importuvfits.py::importuvfits_test::test_receptor_angle |
| 15-Sep-2023 12:05:47 | CAS-7081: Test receptor angle is preserved |
| 15-Sep-2023 12:05:47 | PASSED |
| 15-Sep-2023 12:05:47 | |
| 15-Sep-2023 12:06:07 | 2023-09-15 16:06:07 WARN MSFitsInput::fillAntennaTable XYZHAND keyword not found in AN table. Will assume antenna coordinate system is right handed. |
| 15-Sep-2023 12:06:10 | test_task_importuvfits.py::importuvfits_test::test_rotation_of_vla_ant_positions |
| 15-Sep-2023 12:06:10 | CAS-11726 verify vla location tolerance is large enough to accomodate older |
| 15-Sep-2023 12:06:10 | uvfits files |
| 15-Sep-2023 12:06:10 | PASSED |
| 15-Sep-2023 12:06:10 | |
| 15-Sep-2023 12:06:13 | 2023-09-15 16:06:13 WARN MSFitsInput::fillAntennaTable EVLA there is at least one gap in the antenna sequence found in the FITS AN table. Empty rows will be inserted into the ANTENNA table representing the gaps. |
| 15-Sep-2023 12:06:14 | test_task_importuvfits.py::importuvfits_test::test_validweight |
| 15-Sep-2023 12:06:14 | test_validweight: Tests that WEIGHT vals are the sum of WEIGHT_SPECTRUM values |
| 15-Sep-2023 12:06:14 | PASSED |
| 15-Sep-2023 12:06:14 | |
| 15-Sep-2023 12:06:15 | 2023-09-15 16:06:15 WARN MSFitsInput::fillAntennaTable XYZHAND keyword not found in AN table. Will assume antenna coordinate system is right handed. |
| 15-Sep-2023 12:06:15 | test_task_importuvfits.py::importuvfits_test::test_vlaNewName |
| 15-Sep-2023 12:06:15 | test_vlaNewName: Tests to make sure the antnamescheme new functions on VLA data |
| 15-Sep-2023 12:06:15 | PASSED |
| 15-Sep-2023 12:06:15 | |
| 15-Sep-2023 12:06:16 | 2023-09-15 16:06:16 WARN MSFitsInput::fillAntennaTable XYZHAND keyword not found in AN table. Will assume antenna coordinate system is right handed. |
| 15-Sep-2023 12:06:16 | test_task_importuvfits.py::importuvfits_test::test_vlaOldName |
| 15-Sep-2023 12:06:16 | test_vlaOldName: Tests to make sure the antnamescheme old functions on VLA data |
| 15-Sep-2023 12:06:16 | PASSED |
| 15-Sep-2023 12:06:16 | |
| 15-Sep-2023 12:06:19 | 2023-09-15 16:06:20 WARN MSFitsInput::fillAntennaTable EVLA there is at least one gap in the antenna sequence found in the FITS AN table. Empty rows will be inserted into the ANTENNA table representing the gaps. |
| 15-Sep-2023 12:06:20 | test_task_importuvfits.py::importuvfits_test::test_weightspectexist |
| 15-Sep-2023 12:06:20 | test_weightspectexist: Test for the existence of the WEIGHT_SPECTRUM column in the MS |
| 15-Sep-2023 12:06:20 | PASSED |
| 15-Sep-2023 12:06:20 | |
| 15-Sep-2023 12:06:29 | 2023-09-15 16:06:29 WARN MSFitsInput::fillAntennaTable EVLA there is at least one gap in the antenna sequence found in the FITS AN table. Empty rows will be inserted into the ANTENNA table representing the gaps. |
| 15-Sep-2023 12:06:29 | test_task_importuvfits.py::importuvfits_test::test_weightspectpos |
| 15-Sep-2023 12:06:29 | test_weightspecpos: Test that the values in WEIGHT_SPECTRUM are positive |
| 15-Sep-2023 12:06:29 | PASSED |
| 15-Sep-2023 12:06:29 | |
| 15-Sep-2023 12:06:29 | - generated xml file: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_importuvfits/nose.xml - |
| 15-Sep-2023 12:06:29 | =================== 15 passed, 1 warning in 76.25s (0:01:16) =================== |
| 15-Sep-2023 12:06:30 | ============================= test session starts ============================== |
| 15-Sep-2023 12:06:30 | platform darwin -- Python 3.8.13, pytest-7.4.2, pluggy-1.3.0 -- /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/bin/python |
| 15-Sep-2023 12:06:30 | cachedir: .pytest_cache |
| 15-Sep-2023 12:06:30 | rootdir: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_sdpolaverage |
| 15-Sep-2023 12:06:30 | configfile: pytest.ini |
| 15-Sep-2023 12:06:49 | collecting ... collected 3 items |
| 15-Sep-2023 12:06:49 | |
| 15-Sep-2023 12:06:49 | |
| 15-Sep-2023 12:06:56 | test_task_sdpolaverage.py::test_sdpolaverage::test_default |
| 15-Sep-2023 12:06:56 | PASSED |
| 15-Sep-2023 12:06:56 | |
| 15-Sep-2023 12:06:59 | test_task_sdpolaverage.py::test_sdpolaverage::test_stokes_corrected_data |
| 15-Sep-2023 12:06:59 | PASSED |
| 15-Sep-2023 12:06:59 | |
| 15-Sep-2023 12:07:00 | test_task_sdpolaverage.py::test_sdpolaverage::test_stokes_float_data |
| 15-Sep-2023 12:07:00 | PASSED |
| 15-Sep-2023 12:07:00 | |
| 15-Sep-2023 12:07:00 | - generated xml file: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_sdpolaverage/nose.xml - |
| 15-Sep-2023 12:07:00 | ======================== 3 passed, 1 warning in 30.93s ========================= |
| 15-Sep-2023 12:07:01 | ============================= test session starts ============================== |
| 15-Sep-2023 12:07:01 | platform darwin -- Python 3.8.13, pytest-7.4.2, pluggy-1.3.0 -- /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/bin/python |
| 15-Sep-2023 12:07:01 | cachedir: .pytest_cache |
| 15-Sep-2023 12:07:01 | rootdir: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_uvcontsub_old |
| 15-Sep-2023 12:07:01 | configfile: pytest.ini |
| 15-Sep-2023 12:07:02 | collecting ... collected 6 items |
| 15-Sep-2023 12:07:02 | |
| 15-Sep-2023 12:07:02 | |
| 15-Sep-2023 12:07:03 | 2023-09-15 16:07:03 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release. |
| 15-Sep-2023 12:07:03 | 2023-09-15 16:07:03 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 15-Sep-2023 12:07:05 | test_task_uvcontsub_old.py::zeroth::test_zeroth |
| 15-Sep-2023 12:07:05 | |
| 15-Sep-2023 12:07:05 | Running uvcontsub_old |
| 15-Sep-2023 12:07:05 | Continuum estimate in line-free region |
| 15-Sep-2023 12:07:05 | Continuum estimate in line region |
| 15-Sep-2023 12:07:05 | Continuum-subtracted data in line-free region |
| 15-Sep-2023 12:07:05 | Continuum-subtracted data in line region |
| 15-Sep-2023 12:07:05 | Non-empty pointing table (for MMS case) |
| 15-Sep-2023 12:07:05 | PASSED |
| 15-Sep-2023 12:07:05 | |
| 15-Sep-2023 12:07:05 | 2023-09-15 16:07:06 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release. |
| 15-Sep-2023 12:07:05 | 2023-09-15 16:07:06 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator. |
| 15-Sep-2023 12:07:06 | test_task_uvcontsub_old.py::fourth::test_fourth |
| 15-Sep-2023 12:07:06 | |
| 15-Sep-2023 12:07:06 | Running uvcontsub_old |
| 15-Sep-2023 12:07:06 | Continuum estimate |
| 15-Sep-2023 12:07:06 | Continuum-subtracted data |
| 15-Sep-2023 12:07:06 | PASSED |
| 15-Sep-2023 12:07:06 | |
| 15-Sep-2023 12:07:07 | 2023-09-15 16:07:07 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release. |
| 15-Sep-2023 12:07:07 | 2023-09-15 16:07:08 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator. |
| 15-Sep-2023 12:07:08 | 2023-09-15 16:07:09 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release. |
| 15-Sep-2023 12:07:08 | 2023-09-15 16:07:09 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator. |
| 15-Sep-2023 12:07:12 | test_task_uvcontsub_old.py::combspw::test_combspw |
| 15-Sep-2023 12:07:12 | |
| 15-Sep-2023 12:07:12 | Running uvcontsub_old |
| 15-Sep-2023 12:07:12 | |
| 15-Sep-2023 12:07:12 | Running uvcontsub_old |
| 15-Sep-2023 12:07:12 | combspw fitorder=0 line estimate |
| 15-Sep-2023 12:07:12 | combspw fitorder=1 line estimate |
| 15-Sep-2023 12:07:12 | PASSED |
| 15-Sep-2023 12:07:12 | |
| 15-Sep-2023 12:07:12 | 2023-09-15 16:07:12 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release. |
| 15-Sep-2023 12:07:12 | 2023-09-15 16:07:12 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator. |
| 15-Sep-2023 12:07:12 | test_task_uvcontsub_old.py::excludechans::test_excludechans |
| 15-Sep-2023 12:07:12 | |
| 15-Sep-2023 12:07:12 | Running uvcontsub_old |
| 15-Sep-2023 12:07:12 | Continuum estimate in line-free region |
| 15-Sep-2023 12:07:12 | Continuum estimate in line region |
| 15-Sep-2023 12:07:12 | Continuum-subtracted data in line-free region |
| 15-Sep-2023 12:07:12 | Continuum-subtracted data in line region |
| 15-Sep-2023 12:07:12 | Non-empty pointing table (for MMS case) |
| 15-Sep-2023 12:07:12 | PASSED |
| 15-Sep-2023 12:07:12 | |
| 15-Sep-2023 12:07:12 | 2023-09-15 16:07:13 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release. |
| 15-Sep-2023 12:07:13 | 2023-09-15 16:07:13 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator. |
| 15-Sep-2023 12:07:13 | test_task_uvcontsub_old.py::excludechans2::test_excludechans2 |
| 15-Sep-2023 12:07:13 | |
| 15-Sep-2023 12:07:13 | Running uvcontsub_old |
| 15-Sep-2023 12:07:13 | PASSED |
| 15-Sep-2023 12:07:13 | |
| 15-Sep-2023 12:07:13 | 2023-09-15 16:07:13 WARN uvcontsub_old::::casa This task is deprecated and will be removed in an upcoming release. |
| 15-Sep-2023 12:07:13 | 2023-09-15 16:07:14 WARN calibrater::setvi(bool,bool) Already using OLD VisibilityIterator. |
| 15-Sep-2023 12:07:14 | test_task_uvcontsub_old.py::freqrangeselection::test_freqrangeselection |
| 15-Sep-2023 12:07:14 | |
| 15-Sep-2023 12:07:14 | Running uvcontsub_old |
| 15-Sep-2023 12:07:14 | Continuum estimate in line-free region |
| 15-Sep-2023 12:07:14 | Continuum estimate in line region |
| 15-Sep-2023 12:07:14 | Continuum-subtracted data in line-free region |
| 15-Sep-2023 12:07:14 | Continuum-subtracted data in line region |
| 15-Sep-2023 12:07:14 | Non-empty pointing table (for MMS case) |
| 15-Sep-2023 12:07:14 | PASSED |
| 15-Sep-2023 12:07:14 | |
| 15-Sep-2023 12:07:14 | - generated xml file: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_uvcontsub_old/nose.xml - |
| 15-Sep-2023 12:07:14 | ======================== 6 passed, 1 warning in 12.72s ========================= |
| 15-Sep-2023 12:07:14 | ============================= test session starts ============================== |
| 15-Sep-2023 12:07:14 | platform darwin -- Python 3.8.13, pytest-7.4.2, pluggy-1.3.0 -- /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/bin/python |
| 15-Sep-2023 12:07:14 | cachedir: .pytest_cache |
| 15-Sep-2023 12:07:14 | rootdir: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_simanalyze |
| 15-Sep-2023 12:07:14 | configfile: pytest.ini |
| 15-Sep-2023 12:07:15 | collecting ... collected 6 items |
| 15-Sep-2023 12:07:15 | |
| 15-Sep-2023 12:07:15 | |
| 15-Sep-2023 12:07:16 | 2023-09-15 16:07:16 WARN simanalyze::::casa No operation to be done. Exiting from task. |
| 15-Sep-2023 12:07:16 | test_task_simanalyze.py::simanalyze_main_usage_modes_test_int::test_imaging_False_analysis_False |
| 15-Sep-2023 12:07:16 | test_imaging_False_analysis_False: |
| 15-Sep-2023 12:07:16 | ------------------------------------- |
| 15-Sep-2023 12:07:16 | Not all of the output files will be generated depending on parameter selections |
| 15-Sep-2023 12:07:16 | The image parameter determines if an image is produced (False for no .image file) |
| 15-Sep-2023 12:07:16 | The analyze parameter turns on or off the creation of analytical images |
| 15-Sep-2023 12:07:16 | The imagename parameter takes the name of an already synthesized image |
| 15-Sep-2023 12:07:16 | PASSED |
| 15-Sep-2023 12:07:16 | |
| 15-Sep-2023 12:07:16 | 2023-09-15 16:07:16 WARN simanalyze::simanalyze::casa The number of image pixel in x-axis, 58, is small to cover 8 x PSF. Setting x pixel number, 104. |
| 15-Sep-2023 12:07:16 | 2023-09-15 16:07:16 WARN simanalyze::simanalyze::casa The number of image pixel in y-axis, 51, is small to cover 8 x PSF. Setting y pixel number, 104 |
| 15-Sep-2023 12:07:16 | 2023-09-15 16:07:16 WARN simanalyze::simutil::casa [108, 108] is not an acceptable imagesize, using imsize=[108, 108] instead |
| 15-Sep-2023 12:07:16 | 2023-09-15 16:07:17 WARN simutil::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 15-Sep-2023 12:07:17 | 2023-09-15 16:07:17 WARN simanalyze::simutil::casa No image is generated in this run. Default MS, 'sim_interferometric/sim_interferometric.ms', does not exist -- uv and psf will not be plotted |
| 15-Sep-2023 12:07:17 | test_task_simanalyze.py::simanalyze_main_usage_modes_test_int::test_imaging_False_interferometric_analysis_True_showfidelity_True |
| 15-Sep-2023 12:07:17 | test_imaging_False_interferometric_analysis_True_showfidelity_True: |
| 15-Sep-2023 12:07:17 | ---------------------------------------------------------------------- |
| 15-Sep-2023 12:07:17 | Not all of the output files will be generated depending on parameter selections |
| 15-Sep-2023 12:07:17 | The image parameter determines if an image is produced (False for no .image file) |
| 15-Sep-2023 12:07:17 | The analyze parameter turns on or off the creation of analytical images |
| 15-Sep-2023 12:07:17 | The showfidelity parameter displays the fidelity image |
| 15-Sep-2023 12:07:17 | PASSED |
| 15-Sep-2023 12:07:17 | |
| 15-Sep-2023 12:07:17 | 2023-09-15 16:07:17 WARN simanalyze::simanalyze::casa The number of image pixel in x-axis, 58, is small to cover 8 x PSF. Setting x pixel number, 104. |
| 15-Sep-2023 12:07:17 | 2023-09-15 16:07:17 WARN simanalyze::simanalyze::casa The number of image pixel in y-axis, 51, is small to cover 8 x PSF. Setting y pixel number, 104 |
| 15-Sep-2023 12:07:17 | 2023-09-15 16:07:17 WARN simanalyze::simutil::casa [108, 108] is not an acceptable imagesize, using imsize=[108, 108] instead |
| 15-Sep-2023 12:07:17 | test_task_simanalyze.py::simanalyze_main_usage_modes_test_int::test_imaging_True_interferometric_analysis_False |
| 15-Sep-2023 12:07:17 | test_imaging_True_interferometric_analysis_False: |
| 15-Sep-2023 12:07:17 | ---------------------------------------------------- |
| 15-Sep-2023 12:07:17 | Not all of the output files will be generated depending on parameter selections |
| 15-Sep-2023 12:07:17 | The image parameter determines if an image is produced (False for no .image file) |
| 15-Sep-2023 12:07:17 | The analyze parameter turns on or off the creation of analytical images |
| 15-Sep-2023 12:07:17 | PASSED |
| 15-Sep-2023 12:07:17 | |
| 15-Sep-2023 12:07:29 | 2023-09-15 16:07:30 WARN simobserve::simutil::casa Not all pointings in the mosaic will be observed - check mosaic setup and exposure time parameters! |
| 15-Sep-2023 12:07:30 | 2023-09-15 16:07:30 WARN sdimaging::::casa Invalid sampling=0.0 arcsec. Using the value of orthogonal direction=1724.2047343355027 arcsec |
| 15-Sep-2023 12:07:33 | 2023-09-15 16:07:33 WARN imregrid::ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap. |
| 15-Sep-2023 12:07:33 | 2023-09-15 16:07:34 WARN simutil::ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap. |
| 15-Sep-2023 12:07:33 | 2023-09-15 16:07:34 WARN simutil::ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels. |
| 15-Sep-2023 12:07:36 | 2023-09-15 16:07:36 WARN simanalyze::simutil::casa No image is generated in this run. Default MS, 'sim_single_dish/sim_single_dish.ms', does not exist -- uv and psf will not be plotted |
| 15-Sep-2023 12:07:36 | test_task_simanalyze.py::simanalyze_main_usage_modes_test_sd::test_imaging_False_single_dish_analysis_True_showfidelity_True |
| 15-Sep-2023 12:07:36 | test_imaging_False_single_dish_analysis_True_showfidelity_True: |
| 15-Sep-2023 12:07:36 | ------------------------------------------------------------------ |
| 15-Sep-2023 12:07:36 | Not all of the output files will be generated depending on parameter selections |
| 15-Sep-2023 12:07:36 | The image parameter determines if an image is produced (False for no .image file) |
| 15-Sep-2023 12:07:36 | The analyze parameter turns on or off the creation of analytical images |
| 15-Sep-2023 12:07:36 | The showfidelity parameter displays the fidelity image |
| 15-Sep-2023 12:07:36 | sim_single_dish/sim_single_dish.aca.tp.sd.ms |
| 15-Sep-2023 12:07:36 | PASSED |
| 15-Sep-2023 12:07:36 | |
| 15-Sep-2023 12:07:41 | 2023-09-15 16:07:42 WARN simobserve::simutil::casa Not all pointings in the mosaic will be observed - check mosaic setup and exposure time parameters! |
| 15-Sep-2023 12:07:42 | 2023-09-15 16:07:42 WARN sdimaging::::casa Invalid sampling=0.0 arcsec. Using the value of orthogonal direction=1724.2047343355027 arcsec |
| 15-Sep-2023 12:07:45 | 2023-09-15 16:07:45 WARN imregrid::ImageRegridder::_doImagesOverlap At least one of the images exceeds one degree on at one side, not checking for direction plane overlap. |
| 15-Sep-2023 12:07:45 | test_task_simanalyze.py::simanalyze_main_usage_modes_test_sd::test_imaging_True_single_dish_analysis_False |
| 15-Sep-2023 12:07:45 | test_imaging_True_single_dish_analysis_False: |
| 15-Sep-2023 12:07:45 | ------------------------------------------------ |
| 15-Sep-2023 12:07:45 | Not all of the output files will be generated depending on parameter selections |
| 15-Sep-2023 12:07:45 | The image parameter determines if an image is produced (False for no .image file) |
| 15-Sep-2023 12:07:45 | The analyze parameter turns on or off the creation of analytical images |
| 15-Sep-2023 12:07:45 | The vis parameter can accept one or more MSs that can be interferometric or single dish data |
| 15-Sep-2023 12:07:45 | Modelimage will not be used if the MS is in total power |
| 15-Sep-2023 12:07:45 | PASSED |
| 15-Sep-2023 12:07:45 | |
| 15-Sep-2023 12:07:45 | test_task_simanalyze.py::simanalyze_main_usage_modes_test_both::test_imaging_True_interferometric_and_single_dish_analysis_False |
| 15-Sep-2023 12:07:45 | test_imaging_True_interferometric_and_single_dish_analysis_False: |
| 15-Sep-2023 12:07:45 | -------------------------------------------------------------------- |
| 15-Sep-2023 12:07:45 | Not all of the output files will be generated depending on parameter selections |
| 15-Sep-2023 12:07:45 | The image parameter determines if an image is produced (False for no .image file) |
| 15-Sep-2023 12:07:45 | The analyze parameter turns on or off the creation of analytical images |
| 15-Sep-2023 12:07:45 | The vis parameter can accept one or more MSs that can be interferometric or single dish data |
| 15-Sep-2023 12:07:45 | Modelimage will not be used if the MS is in total power |
| 15-Sep-2023 12:07:45 | SKIPPED (Task call exits with SEVERE error from feather task: Failed...) |
| 15-Sep-2023 12:07:45 | |
| 15-Sep-2023 12:07:45 | - generated xml file: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_simanalyze/nose.xml - |
| 15-Sep-2023 12:07:45 | =========================== short test summary info ============================ |
| 15-Sep-2023 12:07:45 | SKIPPED [1] test_task_simanalyze.py:302: Task call exits with SEVERE error from feather task: Failed AlwaysAssert chan >=0 && chan < Int(nchan()) && stokes >= 0 && stokes < Int(nstokes()) |
| 15-Sep-2023 12:07:45 | =================== 5 passed, 1 skipped, 1 warning in 30.95s =================== |
| 15-Sep-2023 12:07:56 | ============================= test session starts ============================== |
| 15-Sep-2023 12:07:56 | platform darwin -- Python 3.8.13, pytest-7.4.2, pluggy-1.3.0 -- /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6testenv/bin/python |
| 15-Sep-2023 12:07:56 | cachedir: .pytest_cache |
| 15-Sep-2023 12:07:56 | rootdir: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imtrans |
| 15-Sep-2023 12:07:56 | configfile: pytest.ini |
| 15-Sep-2023 12:08:00 | collecting ... collected 6 items |
| 15-Sep-2023 12:08:00 | |
| 15-Sep-2023 12:08:00 | |
| 15-Sep-2023 12:08:01 | test_task_imtrans.py::imtrans_test::test_cas_2364 |
| 15-Sep-2023 12:08:01 | test CAS-2364 fix |
| 15-Sep-2023 12:08:01 | PASSED |
| 15-Sep-2023 12:08:01 | |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::ImageTransposer::_getOrder Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:01 SEVERE imtrans::ImageTransposer::_getOrder Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::::casa Task imtrans raised an exception of class RuntimeError with the following message: 2023-09-15 16:08:01 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:01 SEVERE imtrans::ImageTransposer::_getOrder Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::ImageTransposer::_getOrder Axis number 0 specified multiple times in order parameter 10 . It can only be specified once. |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:01 SEVERE imtrans::ImageTransposer::_getOrder Axis number 0 specified multiple times in order parameter 10 . It can only be specified once. |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::::casa Task imtrans raised an exception of class RuntimeError with the following message: 2023-09-15 16:08:01 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:01 SEVERE imtrans::ImageTransposer::_getOrder Axis number 0 specified multiple times in order parameter 10 . It can only be specified once. |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::CoordinateSystem::getWorldAxesOrder (file ../../coordinates/Coordinates/CoordinateSystem.cc, line 4665) Image has 3 axes but 2 were given. Number of given axes must match the number of image axes |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:01 SEVERE imtrans::CoordinateSystem::getWorldAxesOrder (file ../../coordinates/Coordinates/CoordinateSystem.cc, line 4665) Image has 3 axes but 2 were given. Number of given axes must match the number of image axes |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::::casa Task imtrans raised an exception of class RuntimeError with the following message: 2023-09-15 16:08:01 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:01 SEVERE imtrans::CoordinateSystem::getWorldAxesOrder (file ../../coordinates/Coordinates/CoordinateSystem.cc, line 4665) Image has 3 axes but 2 were given. Number of given axes must match the number of image axes |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:01 SEVERE imtrans::ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::::casa Task imtrans raised an exception of class RuntimeError with the following message: 2023-09-15 16:08:01 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:01 SEVERE imtrans::ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::ImageTransposer::_getOrder Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:01 SEVERE imtrans::ImageTransposer::_getOrder Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::::casa Task imtrans raised an exception of class RuntimeError with the following message: 2023-09-15 16:08:01 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:01 SEVERE imtrans::ImageTransposer::_getOrder Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::CoordinateSystem::getWorldAxesOrder (file ../../coordinates/Coordinates/CoordinateSystem.cc, line 4665) Image has 3 axes but 4 were given. Number of given axes must match the number of image axes |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:01 SEVERE imtrans::CoordinateSystem::getWorldAxesOrder (file ../../coordinates/Coordinates/CoordinateSystem.cc, line 4665) Image has 3 axes but 4 were given. Number of given axes must match the number of image axes |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:01 SEVERE imtrans::::casa Task imtrans raised an exception of class RuntimeError with the following message: 2023-09-15 16:08:01 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:01 SEVERE imtrans::CoordinateSystem::getWorldAxesOrder (file ../../coordinates/Coordinates/CoordinateSystem.cc, line 4665) Image has 3 axes but 4 were given. Number of given axes must match the number of image axes |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:02 SEVERE imtrans::ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:02 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:02 SEVERE imtrans::ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:02 SEVERE imtrans::::casa Task imtrans raised an exception of class RuntimeError with the following message: 2023-09-15 16:08:02 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:02 SEVERE imtrans::ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:02 SEVERE imtrans::CoordinateSystem::getWorldAxesOrder (file ../../coordinates/Coordinates/CoordinateSystem.cc, line 4665) No axis matches requested axis s. Image axis names are [right ascension, declination, frequency] |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:02 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:02 SEVERE imtrans::CoordinateSystem::getWorldAxesOrder (file ../../coordinates/Coordinates/CoordinateSystem.cc, line 4665) No axis matches requested axis s. Image axis names are [right ascension, declination, frequency] |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:02 SEVERE imtrans::::casa Task imtrans raised an exception of class RuntimeError with the following message: 2023-09-15 16:08:02 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:02 SEVERE imtrans::CoordinateSystem::getWorldAxesOrder (file ../../coordinates/Coordinates/CoordinateSystem.cc, line 4665) No axis matches requested axis s. Image axis names are [right ascension, declination, frequency] |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:02 SEVERE imtrans::CoordinateSystem::getWorldAxesOrder (file ../../coordinates/Coordinates/CoordinateSystem.cc, line 4665) Ambiguous axis specification. Both r and r match image axis name right ascension |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:02 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:02 SEVERE imtrans::CoordinateSystem::getWorldAxesOrder (file ../../coordinates/Coordinates/CoordinateSystem.cc, line 4665) Ambiguous axis specification. Both r and r match image axis name right ascension |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:02 SEVERE imtrans::::casa Task imtrans raised an exception of class RuntimeError with the following message: 2023-09-15 16:08:02 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:02 SEVERE imtrans::CoordinateSystem::getWorldAxesOrder (file ../../coordinates/Coordinates/CoordinateSystem.cc, line 4665) Ambiguous axis specification. Both r and r match image axis name right ascension |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:02 SEVERE imtrans::ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:02 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:02 SEVERE imtrans::ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:02 SEVERE imtrans::::casa Task imtrans raised an exception of class RuntimeError with the following message: 2023-09-15 16:08:02 SEVERE imtrans::image::transpose (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2023-09-15 16:08:02 SEVERE imtrans::ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
| 15-Sep-2023 12:08:01 | test_task_imtrans.py::imtrans_test::test_exceptions |
| 15-Sep-2023 12:08:01 | imtrans: Test various exception cases |
| 15-Sep-2023 12:08:01 | PASSED |
| 15-Sep-2023 12:08:01 | |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:02 WARN image::open (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 15-Sep-2023 12:08:01 | test_task_imtrans.py::imtrans_test::test_history |
| 15-Sep-2023 12:08:01 | Test history records are written |
| 15-Sep-2023 12:08:01 | PASSED |
| 15-Sep-2023 12:08:01 | |
| 15-Sep-2023 12:08:01 | 2023-09-15 16:08:02 WARN image::open (file /private/var/folders/_1/t4ckhc6n363cv0zl5rtcwbv40000gr/T/build-via-sdist-ccwufp5z/casatools-6.6.0.14+dirty/src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 15-Sep-2023 12:08:01 | test_task_imtrans.py::imtrans_test::test_imageinfo |
| 15-Sep-2023 12:08:01 | Verify image info is copied |
| 15-Sep-2023 12:08:01 | PASSED |
| 15-Sep-2023 12:08:01 | |
| 15-Sep-2023 12:08:01 | test_task_imtrans.py::imtrans_test::test_straight_copy |
| 15-Sep-2023 12:08:01 | No actual transposing |
| 15-Sep-2023 12:08:01 | PASSED |
| 15-Sep-2023 12:08:01 | |
| 15-Sep-2023 12:08:02 | test_task_imtrans.py::imtrans_test::test_transpose |
| 15-Sep-2023 12:08:02 | Test transposing |
| 15-Sep-2023 12:08:02 | PASSED |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | - generated xml file: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_imtrans/nose.xml - |
| 15-Sep-2023 12:08:02 | ========================= 6 passed, 1 warning in 5.65s ========================= |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_statwt/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_statwt/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_plotants/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_plotants |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_plotants/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_plotants/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_uvmodelfit/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_uvmodelfit |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_uvmodelfit/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_uvmodelfit/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_concat/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_concat |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_concat/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_concat/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imreframe/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imreframe |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_imreframe/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imreframe/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imbaseline/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imbaseline |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_imbaseline/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imbaseline/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_specsmooth/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_specsmooth |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_specsmooth/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_specsmooth/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_accor/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_accor |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_accor/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_accor/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_immoments/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_immoments |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_immoments/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_immoments/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_visstat/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_visstat |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_visstat/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_visstat/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_clearstat/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_clearstat |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_clearstat/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_clearstat/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_applycal/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_applycal |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_applycal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_applycal/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_specfit/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_specfit |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_specfit/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_specfit/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_plotbandpass/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_plotbandpass |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_plotbandpass/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_plotbandpass/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imval/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imval |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_imval/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imval/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_listobs/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_listobs |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_listobs/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_listobs/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_exportfits/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_exportfits |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_exportfits/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_exportfits/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_split/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_split |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_split/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_split/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_listvis/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_listvis |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_listvis/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_listvis/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imdev/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imdev |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_imdev/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imdev/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_rmfit/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_rmfit |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_rmfit/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_rmfit/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_sdimaging/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_sdimaging |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_sdimaging/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_sdimaging/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_listfits/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_listfits |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_listfits/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_listfits/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_sdsidebandsplit/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_sdsidebandsplit |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_sdsidebandsplit/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_sdsidebandsplit/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imhead/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imhead |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_imhead/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imhead/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_nrobeamaverage/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_nrobeamaverage |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_nrobeamaverage/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_nrobeamaverage/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_plotweather/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_plotweather |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_plotweather/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_plotweather/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_calstat/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_calstat |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_calstat/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_calstat/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imsubimage/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imsubimage |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_imsubimage/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imsubimage/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_polcal/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_polcal |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_polcal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_polcal/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_flagcmd/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_flagcmd |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_flagcmd/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_flagcmd/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_sdfixscan/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_sdfixscan |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_sdfixscan/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_sdfixscan/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_sdfit/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_sdfit |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_sdfit/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_sdfit/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_importuvfits/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_importuvfits |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_importuvfits/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_importuvfits/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_sdpolaverage/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_sdpolaverage |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_sdpolaverage/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_sdpolaverage/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_uvcontsub_old |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_uvcontsub_old/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_simanalyze/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_simanalyze |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_simanalyze/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_simanalyze/ |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Setting Working Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imtrans/ |
| 15-Sep-2023 12:08:02 | Test Directory: /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imtrans |
| 15-Sep-2023 12:08:02 | |
| 15-Sep-2023 12:08:02 | Running Command: pytest --junitxml=/Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/xml/test_task_imtrans/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P/casa6/casatestutils/nosedir/test_task_imtrans/ |
| 15-Sep-2023 12:08:02 | Finished task 'Test wheel' with result: Success |
| 15-Sep-2023 12:08:02 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
| 15-Sep-2023 12:08:02 | Parsing test results under /Volumes/EXT/bamboohome/xml-data/build-dir/CASA-CPR84-TTO1P... |
| 15-Sep-2023 12:08:03 | Finished task 'Parse tests' with result: Success |
| 15-Sep-2023 12:08:03 | Running post build plugin 'Docker Container Cleanup' |
| 15-Sep-2023 12:08:03 | Running post build plugin 'NCover Results Collector' |
| 15-Sep-2023 12:08:03 | Running post build plugin 'Clover Results Collector' |
| 15-Sep-2023 12:08:03 | Running post build plugin 'npm Cache Cleanup' |
| 15-Sep-2023 12:08:03 | Running post build plugin 'Artifact Copier' |
| 15-Sep-2023 12:08:03 | Publishing an artifact: OSX10.14 casatasks wheel |
| 15-Sep-2023 12:08:04 | Finished publishing of artifact Required job artifact: [OSX10.14 casatasks wheel], pattern: [casatasks*.whl] anchored at: [wheeldirectory/] in 161.7 ms |
| 15-Sep-2023 12:08:04 | Finalising the build... |
| 15-Sep-2023 12:08:04 | Stopping timer. |
| 15-Sep-2023 12:08:04 | Build CASA-CPR84-TTO1P-1 completed. |
| 15-Sep-2023 12:08:04 | Running on server: post build plugin 'NCover Results Collector' |
| 15-Sep-2023 12:08:04 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
| 15-Sep-2023 12:08:04 | Running on server: post build plugin 'Clover Delta Calculator' |
| 15-Sep-2023 12:08:04 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
| 15-Sep-2023 12:08:04 | All post build plugins have finished |
| 15-Sep-2023 12:08:04 | Generating build results summary... |
| 15-Sep-2023 12:08:05 | Saving build results to disk... |
| 15-Sep-2023 12:08:05 | Store variable context... |
| 15-Sep-2023 12:08:05 | Indexing build results... |
| 15-Sep-2023 12:08:05 | Finished building CASA-CPR84-TTO1P-1. |