Tools and Tasks tests for Python 3.10
Build: #88 is building
Job: Test Tools Many Linux 2.28 Rocky 9.3 Py3.10 was successful
Job result summary
- Completed
- Duration
- 14 minutes
- Agent
- cbt-el7-6.cv.nrao.edu
- Total tests
- 694
- Successful since
- #82 ()
Tests
- 694 tests in total
- 4 tests were quarantined / skipped
- 9 minutes taken in total.
Error summary
The build generated some errors. See the full build log for more details.
fatal: could not read Username for 'https://open-bitbucket.nrao.edu': No such device or address
Error response from daemon: No such container: wheel-container-test
Error response from daemon: No such container: wheel-container-test
2024-10-18 01:52:39 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec.
2024-10-18 01:52:39 INFO GJonesSpline::solve() Number of cubic spline control points = 4
2024-10-18 01:52:39 INFO GJonesSpline::solve() Number of cubic spline knots = 8
2024-10-18 01:52:39 INFO GJonesSpline::solve() Number of cubic spline segments = 1
2024-10-18 01:52:39 INFO GJonesSpline::solve() Fitting amplitude spline.
2024-10-18 01:52:39 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline.
2024-10-18 01:52:39 INFO GJonesSpline::solve() Fitting phase spline.
2024-10-18 01:52:39 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline
2024-10-18 01:52:39 INFO calibrater::solve Finished solving.
2024-10-18 01:52:39 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
2024-10-18 01:52:39 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2024-10-18 01:52:39 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2024-10-18 01:52:39 INFO Clearing all model records in MS header.
2024-10-18 01:52:39 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2024-10-18 01:52:40 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2024-10-18 01:52:41 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2024-10-18 01:52:41 INFO Calibrater:: Initializing nominal selection to the whole MS.
2024-10-18 01:52:41 INFO calibrater::specifycal Beginning specifycal-----------------------
2024-10-18 01:52:41 INFO Creating G Jones table from specified parameters.
2024-10-18 01:52:41 INFO Generating 'G' corrections.
2024-10-18 01:52:41 INFO Specified parameter(s) (per spw and pol) repeated on all antennas.
2024-10-18 01:52:41 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations.
2024-10-18 01:52:41 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9])
2024-10-18 01:52:41 INFO Writing solutions to table: testcalout.cal
2024-10-18 01:52:41 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2024-10-18 01:52:41 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-10-18 01:52:41 INFO calibrater::open ****Using OLD VI-driven calibrater tool****
2024-10-18 01:52:41 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2024-10-18 01:52:41 INFO Clearing all model records in MS header.
2024-10-18 01:52:41 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2024-10-18 01:52:42 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2024-10-18 01:52:42 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2024-10-18 01:52:42 INFO Calibrater:: Initializing nominal selection to the whole MS.
2024-10-18 01:52:43 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
2024-10-18 01:52:43 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
2024-10-18 01:52:43 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-10-18 01:52:43 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)-------
2024-10-18 01:52:43 INFO Calibrater::setsolve Arranging to SOLVE:
2024-10-18 01:52:43 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2024-10-18 01:52:43 INFO Calibrater::state The following calibration terms are arranged for apply:
2024-10-18 01:52:43 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-10-18 01:52:43 INFO Calibrater::state The following calibration term is arranged for solve:
2024-10-18 01:52:43 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2024-10-18 01:52:43 INFO calibrater::solve Beginning solve-----------------------------
2024-10-18 01:52:43 INFO Calibrater::solve The following calibration terms are arranged for apply:
2024-10-18 01:52:43 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-10-18 01:52:43 INFO Calibrater::solve The following calibration term is arranged for solve:
2024-10-18 01:52:43 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2024-10-18 01:52:43 INFO Solving for Mf Mueller
2024-10-18 01:52:43 INFO For solint = inf, found 84 solution intervals.
2024-10-18 01:52:44 INFO Found good Mf Mueller solutions in 84 intervals.
2024-10-18 01:52:44 INFO Writing solutions to table: output.ms
2024-10-18 01:52:45 INFO calibrater::solve Finished solving.
2024-10-18 01:52:45 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
2024-10-18 01:52:45 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2024-10-18 01:52:45 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2024-10-18 01:52:45 INFO Clearing all model records in MS header.
2024-10-18 01:52:45 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2024-10-18 01:52:46 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2024-10-18 01:52:47 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2024-10-18 01:52:47 INFO Calibrater:: Initializing nominal selection to the whole MS.
2024-10-18 01:52:47 INFO name:: No table opened.
2024-10-18 01:52:47 INFO showcache:: The Table Cache has the following 16 entries:
2024-10-18 01:52:47 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms"
2024-10-18 01:52:47 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA"
2024-10-18 01:52:47 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION"
2024-10-18 01:52:47 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED"
2024-10-18 01:52:47 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD"
2024-10-18 01:52:47 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD"
2024-10-18 01:52:47 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY"
2024-10-18 01:52:47 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION"
2024-10-18 01:52:47 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING"
2024-10-18 01:52:47 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION"
2024-10-18 01:52:47 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR"
2024-10-18 01:52:47 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE"
2024-10-18 01:52:47 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW"
2024-10-18 01:52:47 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE"
2024-10-18 01:52:47 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL"
2024-10-18 01:52:47 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER"
2024-10-18 01:52:47 INFO name:: No table opened.
2024-10-18 01:52:47 INFO showcache:: The Table Cache is empty.
2024-10-18 01:52:47 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2024-10-18 01:52:47 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2024-10-18 01:52:47 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2024-10-18 01:52:47 INFO Clearing all model records in MS header.
2024-10-18 01:52:47 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2024-10-18 01:52:48 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2024-10-18 01:52:48 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2024-10-18 01:52:48 INFO Calibrater:: Initializing nominal selection to the whole MS.
2024-10-18 01:52:48 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
2024-10-18 01:52:48 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
2024-10-18 01:52:49 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-10-18 01:52:49 INFO calibrater::correct Beginning correct---------------------------
2024-10-18 01:52:49 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
2024-10-18 01:52:49 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-10-18 01:52:51 INFO calibrater::correct Finished correcting.
2024-10-18 01:52:51 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2024-10-18 01:52:53 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
2024-10-18 01:52:54 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
2024-10-18 01:52:55 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
tar: work: Cannot stat: No such file or directory
tar: Exiting with failure status due to previous errors
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
[notice] A new release of pip is available: 23.0.1 -> 24.2
[notice] To update, run: pip3 install --upgrade pip
Cloning into 'casa-build-utils'...
Error response from daemon: No such container: wheel-container-test
Error response from daemon: No such container: wheel-container-test
2024-10-18 01:52:39 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec.
2024-10-18 01:52:39 INFO GJonesSpline::solve() Number of cubic spline control points = 4
2024-10-18 01:52:39 INFO GJonesSpline::solve() Number of cubic spline knots = 8
2024-10-18 01:52:39 INFO GJonesSpline::solve() Number of cubic spline segments = 1
2024-10-18 01:52:39 INFO GJonesSpline::solve() Fitting amplitude spline.
2024-10-18 01:52:39 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline.
2024-10-18 01:52:39 INFO GJonesSpline::solve() Fitting phase spline.
2024-10-18 01:52:39 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline
2024-10-18 01:52:39 INFO calibrater::solve Finished solving.
2024-10-18 01:52:39 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
2024-10-18 01:52:39 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2024-10-18 01:52:39 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2024-10-18 01:52:39 INFO Clearing all model records in MS header.
2024-10-18 01:52:39 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2024-10-18 01:52:40 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2024-10-18 01:52:41 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2024-10-18 01:52:41 INFO Calibrater:: Initializing nominal selection to the whole MS.
2024-10-18 01:52:41 INFO calibrater::specifycal Beginning specifycal-----------------------
2024-10-18 01:52:41 INFO Creating G Jones table from specified parameters.
2024-10-18 01:52:41 INFO Generating 'G' corrections.
2024-10-18 01:52:41 INFO Specified parameter(s) (per spw and pol) repeated on all antennas.
2024-10-18 01:52:41 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations.
2024-10-18 01:52:41 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9])
2024-10-18 01:52:41 INFO Writing solutions to table: testcalout.cal
2024-10-18 01:52:41 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2024-10-18 01:52:41 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2024-10-18 01:52:41 INFO calibrater::open ****Using OLD VI-driven calibrater tool****
2024-10-18 01:52:41 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2024-10-18 01:52:41 INFO Clearing all model records in MS header.
2024-10-18 01:52:41 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2024-10-18 01:52:42 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2024-10-18 01:52:42 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2024-10-18 01:52:42 INFO Calibrater:: Initializing nominal selection to the whole MS.
2024-10-18 01:52:43 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
2024-10-18 01:52:43 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
2024-10-18 01:52:43 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-10-18 01:52:43 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)-------
2024-10-18 01:52:43 INFO Calibrater::setsolve Arranging to SOLVE:
2024-10-18 01:52:43 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2024-10-18 01:52:43 INFO Calibrater::state The following calibration terms are arranged for apply:
2024-10-18 01:52:43 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-10-18 01:52:43 INFO Calibrater::state The following calibration term is arranged for solve:
2024-10-18 01:52:43 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2024-10-18 01:52:43 INFO calibrater::solve Beginning solve-----------------------------
2024-10-18 01:52:43 INFO Calibrater::solve The following calibration terms are arranged for apply:
2024-10-18 01:52:43 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-10-18 01:52:43 INFO Calibrater::solve The following calibration term is arranged for solve:
2024-10-18 01:52:43 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2024-10-18 01:52:43 INFO Solving for Mf Mueller
2024-10-18 01:52:43 INFO For solint = inf, found 84 solution intervals.
2024-10-18 01:52:44 INFO Found good Mf Mueller solutions in 84 intervals.
2024-10-18 01:52:44 INFO Writing solutions to table: output.ms
2024-10-18 01:52:45 INFO calibrater::solve Finished solving.
2024-10-18 01:52:45 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
2024-10-18 01:52:45 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2024-10-18 01:52:45 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2024-10-18 01:52:45 INFO Clearing all model records in MS header.
2024-10-18 01:52:45 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2024-10-18 01:52:46 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2024-10-18 01:52:47 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2024-10-18 01:52:47 INFO Calibrater:: Initializing nominal selection to the whole MS.
2024-10-18 01:52:47 INFO name:: No table opened.
2024-10-18 01:52:47 INFO showcache:: The Table Cache has the following 16 entries:
2024-10-18 01:52:47 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms"
2024-10-18 01:52:47 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA"
2024-10-18 01:52:47 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION"
2024-10-18 01:52:47 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED"
2024-10-18 01:52:47 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD"
2024-10-18 01:52:47 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD"
2024-10-18 01:52:47 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY"
2024-10-18 01:52:47 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION"
2024-10-18 01:52:47 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING"
2024-10-18 01:52:47 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION"
2024-10-18 01:52:47 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR"
2024-10-18 01:52:47 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE"
2024-10-18 01:52:47 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW"
2024-10-18 01:52:47 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE"
2024-10-18 01:52:47 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL"
2024-10-18 01:52:47 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER"
2024-10-18 01:52:47 INFO name:: No table opened.
2024-10-18 01:52:47 INFO showcache:: The Table Cache is empty.
2024-10-18 01:52:47 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2024-10-18 01:52:47 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2024-10-18 01:52:47 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2024-10-18 01:52:47 INFO Clearing all model records in MS header.
2024-10-18 01:52:47 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2024-10-18 01:52:48 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2024-10-18 01:52:48 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2024-10-18 01:52:48 INFO Calibrater:: Initializing nominal selection to the whole MS.
2024-10-18 01:52:48 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
2024-10-18 01:52:48 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
2024-10-18 01:52:49 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-10-18 01:52:49 INFO calibrater::correct Beginning correct---------------------------
2024-10-18 01:52:49 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
2024-10-18 01:52:49 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2024-10-18 01:52:51 INFO calibrater::correct Finished correcting.
2024-10-18 01:52:51 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2024-10-18 01:52:53 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
2024-10-18 01:52:54 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
2024-10-18 01:52:55 WARN ImageRegrid::regrid You are regridding an image whose beam is not well sampled by the pixel size. Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
tar: work: Cannot stat: No such file or directory
tar: Exiting with failure status due to previous errors
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
[notice] A new release of pip is available: 23.0.1 -> 24.2
[notice] To update, run: pip3 install --upgrade pip
Cloning into 'casa-build-utils'...