Build: #83 failed
Job: Test Tasks ARM Macos 13 Py3.10 was successful
Build log
The build generated 64,663 lines of output.The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
01-Oct-2024 00:10:31 | PASSED |
01-Oct-2024 00:10:31 | |
01-Oct-2024 00:10:33 | test_task_gaincal.py::gaincal_test::test_spwSelect |
01-Oct-2024 00:10:33 | test_spwSelect |
01-Oct-2024 00:10:33 | ---------------- |
01-Oct-2024 00:10:33 | |
01-Oct-2024 00:10:33 | Check that the spw selection parameter functions properly |
01-Oct-2024 00:10:33 | PASSED |
01-Oct-2024 00:10:33 | |
01-Oct-2024 00:10:35 | test_task_gaincal.py::gaincal_test::test_uvrangeSelect |
01-Oct-2024 00:10:35 | Check that using the uv range parameter you can cut off specific antennas |
01-Oct-2024 00:10:35 | PASSED |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_gaincal/nose.xml - |
01-Oct-2024 00:10:35 | ================== 32 passed, 1 warning in 134.38s (0:02:14) =================== |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_fixplanets |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_fixplanets/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_fixplanets/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagmanager/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagmanager |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_flagmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagmanager/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_imbaseline/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_imbaseline |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_imbaseline/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_imbaseline/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_immoments/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_immoments |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_immoments/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_immoments/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_hanningsmooth/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_hanningsmooth |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_hanningsmooth/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_hanningsmooth/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_concat/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_concat |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_concat/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_concat/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_blcal/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_blcal |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_blcal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_blcal/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_imdev/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_imdev |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_imdev/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_imdev/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdintimaging/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdintimaging |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_sdintimaging/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdintimaging/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdfit/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdfit |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_sdfit/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdfit/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_importfitsidi/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_importfitsidi |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_importfitsidi/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_importfitsidi/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_getcalmodvla/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_getcalmodvla |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_getcalmodvla/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_getcalmodvla/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_splattotable/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_splattotable |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_splattotable/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_splattotable/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_fixvis/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_fixvis |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_fixvis/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_fixvis/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_imreframe/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_imreframe |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_imreframe/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_imreframe/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdfixscan/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdfixscan |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_sdfixscan/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdfixscan/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_split/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_split |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_split/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_split/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_polfromgain/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_polfromgain |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_polfromgain/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_polfromgain/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_importmiriad/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_importmiriad |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_importmiriad/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_importmiriad/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_listcal/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_listcal |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_listcal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_listcal/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_importasap/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_importasap |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_importasap/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_importasap/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdgaincal/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdgaincal |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_sdgaincal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdgaincal/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_delmod/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_delmod |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_delmod/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_delmod/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagdata/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagdata |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_flagdata/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagdata/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_clearstat/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_clearstat |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_clearstat/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_clearstat/ |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_bandpass/ |
01-Oct-2024 00:10:35 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_bandpass |
01-Oct-2024 00:10:35 | |
01-Oct-2024 00:10:35 | ============================= test session starts ============================== |
01-Oct-2024 00:10:35 | platform darwin -- Python 3.10.13, pytest-8.3.3, pluggy-1.5.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6testenv/bin/python |
01-Oct-2024 00:10:35 | cachedir: .pytest_cache |
01-Oct-2024 00:10:35 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagcmd |
01-Oct-2024 00:10:35 | configfile: pytest.ini |
01-Oct-2024 00:10:37 | collecting ... collected 46 items |
01-Oct-2024 00:10:37 | |
01-Oct-2024 00:10:37 | |
01-Oct-2024 00:10:39 | 2024-10-01 04:10:40 WARN FlagDataHandler::preLoadColumn (file /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casa6/casatools/src/code/flagging/Flagging/FlagDataHandler.cc, line 989) PROCESSOR sub-table is empty. Assuming CORRELATOR type. |
01-Oct-2024 00:10:39 | test_task_flagcmd.py::test_manual::test_autocorr |
01-Oct-2024 00:10:39 | flagcmd: autocorr=True |
01-Oct-2024 00:10:39 | Moving data... |
01-Oct-2024 00:10:39 | PASSED |
01-Oct-2024 00:10:39 | |
01-Oct-2024 00:10:39 | test_task_flagcmd.py::test_manual::test_compatibility |
01-Oct-2024 00:10:39 | The MS is already around, just unflag |
01-Oct-2024 00:10:39 | 28500.0 of 2882778.0 data was flagged, expected 28500 of 2882778 |
01-Oct-2024 00:10:39 | PASSED |
01-Oct-2024 00:10:39 | |
01-Oct-2024 00:10:39 | test_task_flagcmd.py::test_manual::test_observation |
01-Oct-2024 00:10:39 | The MS is already around, just unflag |
01-Oct-2024 00:10:39 | 28500.0 of 2882778.0 data was flagged, expected 28500 of 2882778 |
01-Oct-2024 00:10:39 | PASSED |
01-Oct-2024 00:10:39 | |
01-Oct-2024 00:10:45 | test_task_flagcmd.py::test_alma::test_cmd |
01-Oct-2024 00:10:45 | flagcmd: inpmode=list with empty parameter |
01-Oct-2024 00:10:45 | Moving data... |
01-Oct-2024 00:10:45 | PASSED |
01-Oct-2024 00:10:45 | |
01-Oct-2024 00:10:45 | test_task_flagcmd.py::test_alma::test_extract |
01-Oct-2024 00:10:45 | flagcmd: action = extract and apply clip on WVR |
01-Oct-2024 00:10:45 | The MS is already around, just unflag |
01-Oct-2024 00:10:45 | PASSED |
01-Oct-2024 00:10:45 | |
01-Oct-2024 00:10:45 | test_task_flagcmd.py::test_alma::test_intent |
01-Oct-2024 00:10:45 | flagcmd: test scan intent selection |
01-Oct-2024 00:10:45 | The MS is already around, just unflag |
01-Oct-2024 00:10:45 | PASSED |
01-Oct-2024 00:10:45 | |
01-Oct-2024 00:10:46 | test_task_flagcmd.py::test_unapply::test_umanualflag |
01-Oct-2024 00:10:46 | flagcmd: unapply manual agent |
01-Oct-2024 00:10:46 | PASSED |
01-Oct-2024 00:10:46 | |
01-Oct-2024 00:10:47 | test_task_flagcmd.py::test_unapply::test_unapply_antint |
01-Oct-2024 00:10:47 | flagcmd: unapply antint agent |
01-Oct-2024 00:10:47 | The MS is already around, just unflag |
01-Oct-2024 00:10:47 | PASSED |
01-Oct-2024 00:10:47 | |
01-Oct-2024 00:10:47 | test_task_flagcmd.py::test_unapply::test_unapply_clip_and_unset_flagrow |
01-Oct-2024 00:10:47 | flagcmd: Check that FLAG_ROW is unset after un-applying a clip agent |
01-Oct-2024 00:10:47 | The MS is already around, just unflag |
01-Oct-2024 00:10:47 | PASSED |
01-Oct-2024 00:10:47 | |
01-Oct-2024 00:10:47 | test_task_flagcmd.py::test_unapply::test_unapply_rflag_and_unset_flagrow |
01-Oct-2024 00:10:47 | flagcmd: Check that FLAG_ROW is unset after un-applying an rflag agent |
01-Oct-2024 00:10:47 | The MS is already around, just unflag |
01-Oct-2024 00:10:47 | PASSED |
01-Oct-2024 00:10:47 | |
01-Oct-2024 00:10:48 | test_task_flagcmd.py::test_unapply::test_unapply_tfcrop_and_unset_flagrow |
01-Oct-2024 00:10:48 | flagcmd: Check that FLAG_ROW is unset after un-applying an tfcrop agent |
01-Oct-2024 00:10:48 | The MS is already around, just unflag |
01-Oct-2024 00:10:48 | PASSED |
01-Oct-2024 00:10:48 | |
01-Oct-2024 00:10:48 | 2024-10-01 04:10:48 WARN flagcmd::::casa The unapply action can only be used with inpmode='table' |
01-Oct-2024 00:10:48 | 2024-10-01 04:10:48 WARN flagcmd::::casa Save the commands to the FLAG_CMD table before using unapply |
01-Oct-2024 00:10:48 | 2024-10-01 04:10:48 SEVERE flagcmd::::casa Task flagcmd raised an exception of class ValueError with the following message: Unsupported action='unapply' for inpmode='list' |
01-Oct-2024 00:10:48 | test_task_flagcmd.py::test_unapply::test_unsupported_unapply |
01-Oct-2024 00:10:48 | flagcmd: raise exception from inpmode=list and unapply |
01-Oct-2024 00:10:48 | The MS is already around, just unflag |
01-Oct-2024 00:10:48 | Expected error! |
01-Oct-2024 00:10:48 | PASSED |
01-Oct-2024 00:10:48 | |
01-Oct-2024 00:10:48 | test_task_flagcmd.py::test_unapply::test_uquack |
01-Oct-2024 00:10:48 | flagcmd: unapply quack agent |
01-Oct-2024 00:10:48 | The MS is already around, just unflag |
01-Oct-2024 00:10:48 | PASSED |
01-Oct-2024 00:10:48 | |
01-Oct-2024 00:10:49 | test_task_flagcmd.py::test_unapply::test_uscans |
01-Oct-2024 00:10:49 | flagcmd: Unapply only APPLIED=True |
01-Oct-2024 00:10:49 | The MS is already around, just unflag |
01-Oct-2024 00:10:49 | PASSED |
01-Oct-2024 00:10:49 | |
01-Oct-2024 00:10:49 | test_task_flagcmd.py::test_unapply::test_utfcrop |
01-Oct-2024 00:10:49 | flagcmd: unapply tfcrop agent |
01-Oct-2024 00:10:49 | The MS is already around, just unflag |
01-Oct-2024 00:10:49 | PASSED |
01-Oct-2024 00:10:49 | |
01-Oct-2024 00:10:50 | test_task_flagcmd.py::test_savepars::test_list1 |
01-Oct-2024 00:10:50 | flagcmd: list and savepars=True/False |
01-Oct-2024 00:10:50 | PASSED |
01-Oct-2024 00:10:50 | |
01-Oct-2024 00:10:50 | 2024-10-01 04:10:51 SEVERE flagcmd::::casa Task flagcmd raised an exception of class RuntimeError with the following message: You have set overwrite to False. Remove newfile.txt before saving the flag commands |
01-Oct-2024 00:10:50 | test_task_flagcmd.py::test_savepars::test_overwrite_false |
01-Oct-2024 00:10:50 | flagcmd: Use savepars and overwrite=False |
01-Oct-2024 00:10:50 | The MS is already around, just unflag |
01-Oct-2024 00:10:50 | Expected error! |
01-Oct-2024 00:10:50 | PASSED |
01-Oct-2024 00:10:50 | |
01-Oct-2024 00:10:50 | test_task_flagcmd.py::test_savepars::test_overwrite_false1 |
01-Oct-2024 00:10:50 | flagcmd: Use savepars and overwrite=False |
01-Oct-2024 00:10:50 | The MS is already around, just unflag |
01-Oct-2024 00:10:50 | PASSED |
01-Oct-2024 00:10:50 | |
01-Oct-2024 00:10:50 | test_task_flagcmd.py::test_savepars::test_overwrite_true |
01-Oct-2024 00:10:50 | flagcmd: Use savepars and overwrite=True |
01-Oct-2024 00:10:50 | The MS is already around, just unflag |
01-Oct-2024 00:10:50 | PASSED |
01-Oct-2024 00:10:50 | |
01-Oct-2024 00:10:51 | 2024-10-01 04:10:52 WARN Manual_0::sanitizeCorrExpression (file /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casa6/casatools/src/code/flagging/Flagging/FlagAgentBase.cc, line 966) Correlation product [XX] not available |
01-Oct-2024 00:10:51 | test_task_flagcmd.py::test_XML::test_missing_corr |
01-Oct-2024 00:10:51 | flagcmd: CAS-4234, non-existing correlation raise no error |
01-Oct-2024 00:10:51 | Moving data... |
01-Oct-2024 00:10:51 | PASSED |
01-Oct-2024 00:10:51 | |
01-Oct-2024 00:10:51 | 2024-10-01 04:10:52 WARN flagcmd::::casa Cannot open tosr0001_scan3_noonline.ms/SpectralWindow.xml |
01-Oct-2024 00:10:51 | 2024-10-01 04:10:52 WARN flagcmd::::casa Cannot open tosr0001_scan3_noonline.ms/SpectralWindow.xml |
01-Oct-2024 00:10:52 | test_task_flagcmd.py::test_XML::test_xml1 |
01-Oct-2024 00:10:52 | flagcmd: list xml file and save in outfile |
01-Oct-2024 00:10:52 | Moving data... |
01-Oct-2024 00:10:52 | PASSED |
01-Oct-2024 00:10:52 | |
01-Oct-2024 00:10:52 | could not make way for new symlink: tosr0001_scan3_noonline.ms |
01-Oct-2024 00:10:52 | test_task_flagcmd.py::test_XML::test_xml2 cannot delete non-empty directory: tosr0001_scan3_noonline.ms |
01-Oct-2024 00:10:52 | rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1356) [sender=3.2.7] |
01-Oct-2024 00:10:52 | |
01-Oct-2024 00:10:52 | flagcmd: list xml file and save in outfile |
01-Oct-2024 00:10:52 | Moving data... |
01-Oct-2024 00:10:52 | PASSED |
01-Oct-2024 00:10:52 | |
01-Oct-2024 00:10:53 | test_task_flagcmd.py::test_shadow::test_CAS2399 |
01-Oct-2024 00:10:53 | flagcmd: shadow by antennas not present in MS |
01-Oct-2024 00:10:53 | Moving data... |
01-Oct-2024 00:10:53 | PASSED |
01-Oct-2024 00:10:53 | |
01-Oct-2024 00:10:53 | test_task_flagcmd.py::test_antint::test_antint_defaults |
01-Oct-2024 00:10:53 | flagcmd:: Test of antint with defaults |
01-Oct-2024 00:10:53 | Moving data... |
01-Oct-2024 00:10:53 | PASSED |
01-Oct-2024 00:10:53 | |
01-Oct-2024 00:10:53 | test_task_flagcmd.py::test_antint::test_antint_inputs |
01-Oct-2024 00:10:53 | flagcmd: test of inputs to flagcmd in antint mode |
01-Oct-2024 00:10:53 | The MS is already around, just unflag |
01-Oct-2024 00:10:53 | PASSED |
01-Oct-2024 00:10:53 | |
01-Oct-2024 00:10:56 | test_task_flagcmd.py::test_rflag::test_rflagauto |
01-Oct-2024 00:10:56 | flagcmd:: Test of rflag with defaults |
01-Oct-2024 00:10:56 | |
01-Oct-2024 00:10:56 | Moving data... |
01-Oct-2024 00:10:56 | (6) Finished flagcmd test : auto : 42728.0 |
01-Oct-2024 00:10:56 | PASSED |
01-Oct-2024 00:10:56 | |
01-Oct-2024 00:10:57 | test_task_flagcmd.py::test_rflag::test_rflaginputs |
01-Oct-2024 00:10:57 | flagcmd:: Test of rflag threshold-inputs of both types (file and inline) |
01-Oct-2024 00:10:57 | |
01-Oct-2024 00:10:57 | The MS is already around, just unflag |
01-Oct-2024 00:10:57 | (3) Finished flagcmd test : using tdevfile, fdevfile in the cmd (test 1)) : 5971.0 |
01-Oct-2024 00:10:57 | (4) Finished flagcmd test : using cmd arrays : 5971.0 |
01-Oct-2024 00:10:57 | (5) Finished flagcmd test : using outcmd.txt from flagdata (test 2) : 39504.0 |
01-Oct-2024 00:10:57 | PASSED |
01-Oct-2024 00:10:57 | |
01-Oct-2024 00:11:00 | test_task_flagcmd.py::test_actions::test_CAS4819 |
01-Oct-2024 00:11:00 | flagcmd: CAS-4819, Flag commands from three files |
01-Oct-2024 00:11:00 | Moving data... |
01-Oct-2024 00:11:00 | PASSED |
01-Oct-2024 00:11:00 | |
01-Oct-2024 00:11:00 | test_task_flagcmd.py::test_actions::test_action_list1 |
01-Oct-2024 00:11:00 | flagcmd: action=list with inpmode from a list |
01-Oct-2024 00:11:00 | The MS is already around, just unflag |
01-Oct-2024 00:11:00 | PASSED |
01-Oct-2024 00:11:00 | |
01-Oct-2024 00:11:01 | test_task_flagcmd.py::test_actions::test_action_list2 |
01-Oct-2024 00:11:01 | flagcmd: action=list with inpmode from a file |
01-Oct-2024 00:11:01 | The MS is already around, just unflag |
01-Oct-2024 00:11:01 | PASSED |
01-Oct-2024 00:11:01 | |
01-Oct-2024 00:11:01 | test_task_flagcmd.py::test_actions::test_action_plot_da |
01-Oct-2024 00:11:01 | flagcmd: Test action=plot to plot page with DA antenna CAS-5187 |
01-Oct-2024 00:11:01 | The MS is already around, just unflag |
01-Oct-2024 00:11:01 | PASSED |
01-Oct-2024 00:11:01 | |
01-Oct-2024 00:11:02 | test_task_flagcmd.py::test_actions::test_action_plot_large |
01-Oct-2024 00:11:02 | flagcmd: Test action=plot to plot many antennas into multiple pages |
01-Oct-2024 00:11:02 | The MS is already around, just unflag |
01-Oct-2024 00:11:02 | PASSED |
01-Oct-2024 00:11:02 | |
01-Oct-2024 00:11:02 | test_task_flagcmd.py::test_actions::test_action_plot_list |
01-Oct-2024 00:11:02 | flagcmd: Test action=plot to plot 4 antennas and no timerange |
01-Oct-2024 00:11:02 | The MS is already around, just unflag |
01-Oct-2024 00:11:02 | PASSED |
01-Oct-2024 00:11:02 | |
01-Oct-2024 00:11:03 | test_task_flagcmd.py::test_actions::test_action_plot_table |
01-Oct-2024 00:11:03 | flagcmd: Test action=plot, nothing plotted |
01-Oct-2024 00:11:03 | The MS is already around, just unflag |
01-Oct-2024 00:11:03 | PASSED |
01-Oct-2024 00:11:03 | |
01-Oct-2024 00:11:03 | test_task_flagcmd.py::test_actions::test_list_reason1 |
01-Oct-2024 00:11:03 | flagcmd: select by reason from two files |
01-Oct-2024 00:11:03 | The MS is already around, just unflag |
01-Oct-2024 00:11:03 | The MS is already around, just unflag |
01-Oct-2024 00:11:03 | PASSED |
01-Oct-2024 00:11:03 | |
01-Oct-2024 00:11:03 | 2024-10-01 04:11:04 WARN AgentFlagger::initAgents Cannot create agent Manual_2: State Expression: No match found for "CAL*POINT*" |
01-Oct-2024 00:11:03 | 2024-10-01 04:11:04 WARN AgentFlagger::initAgents+ State Expression: Partial or no match for State ID list [] |
01-Oct-2024 00:11:03 | 2024-10-01 04:11:04 WARN Spw Expression: No match found for "Subband:8" |
01-Oct-2024 00:11:04 | test_task_flagcmd.py::test_actions::test_spw_error_handler |
01-Oct-2024 00:11:04 | flagcmd: A non-existing spw name in a compound with a existing spw should not fail |
01-Oct-2024 00:11:04 | The MS is already around, just unflag |
01-Oct-2024 00:11:04 | PASSED |
01-Oct-2024 00:11:04 | |
01-Oct-2024 00:11:04 | 2024-10-01 04:11:05 WARN Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagcmd/cal.fewscans.bpass); attempting to update... |
01-Oct-2024 00:11:04 | 2024-10-01 04:11:05 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
01-Oct-2024 00:11:06 | test_task_flagcmd.py::test_cmdbandpass::test_MS_flagcmds |
01-Oct-2024 00:11:06 | Flagcmd:: Save flags to MS and apply to cal table |
01-Oct-2024 00:11:06 | Moving data... |
01-Oct-2024 00:11:06 | Moving data... |
01-Oct-2024 00:11:06 | The CalTable is already around, just unflag |
01-Oct-2024 00:11:06 | PASSED |
01-Oct-2024 00:11:06 | |
01-Oct-2024 00:11:07 | 2024-10-01 04:11:07 WARN Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagcmd/cal.fewscans.bpass); attempting to update... |
01-Oct-2024 00:11:07 | 2024-10-01 04:11:07 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
01-Oct-2024 00:11:07 | test_task_flagcmd.py::test_cmdbandpass::test_cal_observation |
01-Oct-2024 00:11:07 | Flagcmd: flag an observation from an old cal table format |
01-Oct-2024 00:11:07 | Moving data... |
01-Oct-2024 00:11:07 | PASSED |
01-Oct-2024 00:11:07 | |
01-Oct-2024 00:11:07 | 2024-10-01 04:11:08 WARN Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagcmd/cal.fewscans.bpass); attempting to update... |
01-Oct-2024 00:11:07 | 2024-10-01 04:11:08 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
01-Oct-2024 00:11:07 | test_task_flagcmd.py::test_cmdbandpass::test_cal_time_field |
01-Oct-2024 00:11:07 | Flagcmd: clip a timerange from a field |
01-Oct-2024 00:11:07 | Moving data... |
01-Oct-2024 00:11:07 | PASSED |
01-Oct-2024 00:11:07 | |
01-Oct-2024 00:11:08 | 2024-10-01 04:11:08 WARN Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagcmd/cal.fewscans.bpass); attempting to update... |
01-Oct-2024 00:11:08 | 2024-10-01 04:11:08 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
01-Oct-2024 00:11:08 | test_task_flagcmd.py::test_cmdbandpass::test_clip_one_list |
01-Oct-2024 00:11:08 | Flagcmd: Flag one solution using one command in a list |
01-Oct-2024 00:11:08 | Moving data... |
01-Oct-2024 00:11:08 | PASSED |
01-Oct-2024 00:11:08 | |
01-Oct-2024 00:11:08 | 2024-10-01 04:11:09 WARN Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagcmd/cal.fewscans.bpass); attempting to update... |
01-Oct-2024 00:11:08 | 2024-10-01 04:11:09 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
01-Oct-2024 00:11:09 | test_task_flagcmd.py::test_cmdbandpass::test_default_cparam |
01-Oct-2024 00:11:09 | Flagcmd: flag CPARAM data column |
01-Oct-2024 00:11:09 | Moving data... |
01-Oct-2024 00:11:09 | PASSED |
01-Oct-2024 00:11:09 | |
01-Oct-2024 00:11:09 | 2024-10-01 04:11:10 WARN Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagcmd/cal.fewscans.bpass); attempting to update... |
01-Oct-2024 00:11:09 | 2024-10-01 04:11:10 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
01-Oct-2024 00:11:10 | test_task_flagcmd.py::test_cmdbandpass::test_flagbackup |
01-Oct-2024 00:11:10 | Flagcmd: backup cal table flags |
01-Oct-2024 00:11:10 | Moving data... |
01-Oct-2024 00:11:10 | PASSED |
01-Oct-2024 00:11:10 | |
01-Oct-2024 00:11:10 | 2024-10-01 04:11:10 WARN Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagcmd/cal.fewscans.bpass); attempting to update... |
01-Oct-2024 00:11:10 | 2024-10-01 04:11:10 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
01-Oct-2024 00:11:10 | test_task_flagcmd.py::test_cmdbandpass::test_list_field_Selection_for_bpass |
01-Oct-2024 00:11:10 | Flagcmd:: Manually flag a bpass-based CalTable using file in list mode |
01-Oct-2024 00:11:10 | Moving data... |
01-Oct-2024 00:11:10 | PASSED |
01-Oct-2024 00:11:10 | |
01-Oct-2024 00:11:11 | 2024-10-01 04:11:11 WARN Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagcmd/cal.fewscans.bpass); attempting to update... |
01-Oct-2024 00:11:11 | 2024-10-01 04:11:11 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
01-Oct-2024 00:11:11 | test_task_flagcmd.py::test_cmdbandpass::test_manual_field_selection_for_bpass |
01-Oct-2024 00:11:11 | Flagcmd:: Manually flag a bpass-based CalTable using field selection |
01-Oct-2024 00:11:11 | Moving data... |
01-Oct-2024 00:11:11 | PASSED |
01-Oct-2024 00:11:11 | |
01-Oct-2024 00:11:11 | 2024-10-01 04:11:12 WARN Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagcmd/cal.fewscans.bpass); attempting to update... |
01-Oct-2024 00:11:11 | 2024-10-01 04:11:12 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
01-Oct-2024 00:11:12 | test_task_flagcmd.py::test_cmdbandpass::test_save_cal |
01-Oct-2024 00:11:12 | Flagcmd: list flag cmds from MS and save to a file |
01-Oct-2024 00:11:12 | Moving data... |
01-Oct-2024 00:11:12 | The MS is already around, just unflag |
01-Oct-2024 00:11:12 | The CalTable is already around, just unflag |
01-Oct-2024 00:11:12 | PASSED |
01-Oct-2024 00:11:12 | |
01-Oct-2024 00:11:12 | 2024-10-01 04:11:13 WARN Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagcmd/cal.fewscans.bpass); attempting to update... |
01-Oct-2024 00:11:12 | 2024-10-01 04:11:13 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
01-Oct-2024 00:11:12 | 2024-10-01 04:11:13 WARN AgentFlagger::parseAgentParameters Mode elevation is not valid or doesn't exist |
01-Oct-2024 00:11:12 | 2024-10-01 04:11:13 WARN flagcmd::::casa Failed to parse parameters of mode manual in row 1 |
01-Oct-2024 00:11:12 | test_task_flagcmd.py::test_cmdbandpass::test_unsupported_mode_in_list |
01-Oct-2024 00:11:12 | Flagcmd: elevation and shadow are not supported in cal tables |
01-Oct-2024 00:11:12 | Moving data... |
01-Oct-2024 00:11:12 | PASSED |
01-Oct-2024 00:11:12 | |
01-Oct-2024 00:11:12 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_flagcmd/nose.xml - |
01-Oct-2024 00:11:12 | ======================== 46 passed, 1 warning in 37.13s ======================== |
01-Oct-2024 00:11:13 | ============================= test session starts ============================== |
01-Oct-2024 00:11:13 | platform darwin -- Python 3.10.13, pytest-8.3.3, pluggy-1.5.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6testenv/bin/python |
01-Oct-2024 00:11:13 | cachedir: .pytest_cache |
01-Oct-2024 00:11:13 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_specfit |
01-Oct-2024 00:11:13 | configfile: pytest.ini |
01-Oct-2024 00:11:15 | collecting ... collected 20 items |
01-Oct-2024 00:11:15 | |
01-Oct-2024 00:11:15 | |
01-Oct-2024 00:11:15 | 2024-10-01 04:11:15 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:15 | test_task_specfit.py::specfit_test::test_1 |
01-Oct-2024 00:11:15 | Tests of averaging over a region and then fitting |
01-Oct-2024 00:11:15 | PASSED |
01-Oct-2024 00:11:15 | |
01-Oct-2024 00:11:15 | test_task_specfit.py::specfit_test::test_10 |
01-Oct-2024 00:11:15 | test results of non-multi-fit gaussian triplet |
01-Oct-2024 00:11:15 | PASSED |
01-Oct-2024 00:11:15 | |
01-Oct-2024 00:11:16 | test_task_specfit.py::specfit_test::test_11 |
01-Oct-2024 00:11:16 | test results of multi-fit gaussian triplet |
01-Oct-2024 00:11:16 | PASSED |
01-Oct-2024 00:11:16 | |
01-Oct-2024 00:11:17 | test_task_specfit.py::specfit_test::test_12 |
01-Oct-2024 00:11:17 | test results of lorentzian fitting |
01-Oct-2024 00:11:17 | PASSED |
01-Oct-2024 00:11:17 | |
01-Oct-2024 00:11:17 | 2024-10-01 04:11:17 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged). |
01-Oct-2024 00:11:17 | test_task_specfit.py::specfit_test::test_13 |
01-Oct-2024 00:11:17 | test setting solution parameter validities |
01-Oct-2024 00:11:17 | PASSED |
01-Oct-2024 00:11:17 | |
01-Oct-2024 00:11:17 | 2024-10-01 04:11:17 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:17 | 2024-10-01 04:11:17 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:17 | 2024-10-01 04:11:18 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:17 | 2024-10-01 04:11:18 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:17 | 2024-10-01 04:11:18 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:17 | 2024-10-01 04:11:18 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:18 | 2024-10-01 04:11:18 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:18 | 2024-10-01 04:11:18 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:18 | 2024-10-01 04:11:18 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:18 | 2024-10-01 04:11:18 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:18 | 2024-10-01 04:11:19 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:18 | 2024-10-01 04:11:19 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:18 | 2024-10-01 04:11:19 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:18 | 2024-10-01 04:11:19 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:19 | 2024-10-01 04:11:19 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:19 | 2024-10-01 04:11:19 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:19 | 2024-10-01 04:11:19 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:19 | 2024-10-01 04:11:19 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:19 | 2024-10-01 04:11:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:19 | 2024-10-01 04:11:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:19 | 2024-10-01 04:11:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:20 | 2024-10-01 04:11:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:20 | 2024-10-01 04:11:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:20 | 2024-10-01 04:11:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:20 | test_task_specfit.py::specfit_test::test_14 |
01-Oct-2024 00:11:20 | PASSED |
01-Oct-2024 00:11:20 | |
01-Oct-2024 00:11:20 | 2024-10-01 04:11:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged). |
01-Oct-2024 00:11:20 | test_task_specfit.py::specfit_test::test_2 |
01-Oct-2024 00:11:20 | multipixel, two gaussian fit |
01-Oct-2024 00:11:20 | PASSED |
01-Oct-2024 00:11:20 | |
01-Oct-2024 00:11:20 | 2024-10-01 04:11:20 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged). |
01-Oct-2024 00:11:20 | test_task_specfit.py::specfit_test::test_3 |
01-Oct-2024 00:11:20 | Test two gaussian + one polynomial image |
01-Oct-2024 00:11:20 | PASSED |
01-Oct-2024 00:11:20 | |
01-Oct-2024 00:11:20 | 2024-10-01 04:11:21 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged). |
01-Oct-2024 00:11:21 | test_task_specfit.py::specfit_test::test_4 |
01-Oct-2024 00:11:21 | writing solution images for multipixel, two gaussian fit |
01-Oct-2024 00:11:21 | PASSED |
01-Oct-2024 00:11:21 | |
01-Oct-2024 00:11:21 | 2024-10-01 04:11:21 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged). |
01-Oct-2024 00:11:21 | test_task_specfit.py::specfit_test::test_4_5 |
01-Oct-2024 00:11:21 | writing solution images for multipixel, two gaussian fit with mask - CAS-6134 |
01-Oct-2024 00:11:21 | PASSED |
01-Oct-2024 00:11:21 | |
01-Oct-2024 00:11:21 | test_task_specfit.py::specfit_test::test_5 |
01-Oct-2024 00:11:21 | test results of multi-pixel one gaussian fit with estimates file |
01-Oct-2024 00:11:21 | PASSED |
01-Oct-2024 00:11:21 | |
01-Oct-2024 00:11:21 | test_task_specfit.py::specfit_test::test_6 |
01-Oct-2024 00:11:21 | test results of non-multi-pixel one gaussian fit with estimates file |
01-Oct-2024 00:11:21 | PASSED |
01-Oct-2024 00:11:21 | |
01-Oct-2024 00:11:21 | test_task_specfit.py::specfit_test::test_7 |
01-Oct-2024 00:11:21 | test results of non-multi-pixel one gaussian fit with estimates file keeping peak fixed |
01-Oct-2024 00:11:21 | PASSED |
01-Oct-2024 00:11:21 | |
01-Oct-2024 00:11:22 | test_task_specfit.py::specfit_test::test_8 |
01-Oct-2024 00:11:22 | Test two gaussian + one polynomial image with estimates |
01-Oct-2024 00:11:22 | PASSED |
01-Oct-2024 00:11:22 | |
01-Oct-2024 00:11:22 | test_task_specfit.py::specfit_test::test_8a |
01-Oct-2024 00:11:22 | Test two gaussian + one polynomial image with estimates |
01-Oct-2024 00:11:22 | PASSED |
01-Oct-2024 00:11:22 | |
01-Oct-2024 00:11:22 | 2024-10-01 04:11:22 SEVERE specfit::image::fitprofile Exception Reported: Exception: There are not enough points (2) along the fit axis to fit 3 unknowns. |
01-Oct-2024 00:11:22 | 2024-10-01 04:11:22 SEVERE specfit::image::fitprofile+ ... thrown by Record casa::ImageProfileFitter::fit(Bool) at File: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageProfileFitter.cc, line: 238 |
01-Oct-2024 00:11:22 | test_task_specfit.py::specfit_test::test_CAS_7620 |
01-Oct-2024 00:11:22 | Test fix of segfault that occurred for small channel ranges |
01-Oct-2024 00:11:22 | PASSED |
01-Oct-2024 00:11:22 | |
01-Oct-2024 00:11:22 | 2024-10-01 04:11:22 SEVERE specfit::image::fitprofile Exception Reported: Exception: Specified fit axis 5 must be less than the number of image axes (4). |
01-Oct-2024 00:11:22 | 2024-10-01 04:11:22 SEVERE specfit::image::fitprofile+ ... thrown by void casa::ImageProfileFitter::_finishConstruction() at File: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageProfileFitter.cc, line: 579 |
01-Oct-2024 00:11:22 | 2024-10-01 04:11:22 SEVERE specfit::image::fitprofile Exception Reported: Exception: box not specified correctly. |
01-Oct-2024 00:11:22 | 2024-10-01 04:11:22 SEVERE specfit::image::fitprofile+ ... thrown by Record casa::CasacRegionManager::fromBCS(String &, uInt &, String &, const Record *const &, const String &, const String &, const StokesControl, const String &, const IPosition &, const String &, Bool) at File: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casa6/casatools/src/code/imageanalysis/Regions/CasacRegionManager.cc, line: 235 |
01-Oct-2024 00:11:22 | 2024-10-01 04:11:22 SEVERE specfit::CasacRegionManager::_fromBCS trc in box spec is greater than or equal to number of direction coordinate pixels in the image |
01-Oct-2024 00:11:22 | 2024-10-01 04:11:22 SEVERE specfit::image::fitprofile Exception Reported: 2024-10-01 04:11:22 SEVERE specfit::CasacRegionManager::_fromBCS trc in box spec is greater than or equal to number of direction coordinate pixels in the image |
01-Oct-2024 00:11:22 | 2024-10-01 04:11:22 SEVERE specfit::image::fitprofile Exception Reported: Invalid channel specification in abc of spec abc at File: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casa6/casatools/src/code/imageanalysis/IO/ParameterParser.cc, line: 176 |
01-Oct-2024 00:11:22 | 2024-10-01 04:11:22 SEVERE specfit::image::fitprofile Exception Reported: Invalid channel specification in 0-200 of spec 0-200 at File: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casa6/casatools/src/code/imageanalysis/IO/ParameterParser.cc, line: 176 |
01-Oct-2024 00:11:22 | 2024-10-01 04:11:22 SEVERE specfit::CasacRegionManager::_setPolarizationRanges (Sub)String ABC in stokes specification part ABC does not match a known polarization. |
01-Oct-2024 00:11:22 | 2024-10-01 04:11:22 SEVERE specfit::image::fitprofile Exception Reported: 2024-10-01 04:11:22 SEVERE specfit::CasacRegionManager::_setPolarizationRanges (Sub)String ABC in stokes specification part ABC does not match a known polarization. |
01-Oct-2024 00:11:22 | 2024-10-01 04:11:22 SEVERE specfit::image::fitprofile Exception Reported: LCBox::LCBox - blc [0, 0, 0, 2147483647] must be <= trc [8, 8, 99, 0] |
01-Oct-2024 00:11:22 | 2024-10-01 04:11:22 SEVERE specfit::image::fitprofile Exception Reported: Exception: Number of non-polynomials is 0 and polynomial order is less than zero. According to these inputs there is nothing to fit.. |
01-Oct-2024 00:11:22 | 2024-10-01 04:11:22 SEVERE specfit::image::fitprofile+ ... thrown by void casa::ImageProfileFitter::_checkNGaussAndPolyOrder() const at File: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageProfileFitter.cc, line: 568 |
01-Oct-2024 00:11:22 | test_task_specfit.py::specfit_test::test_exceptions |
01-Oct-2024 00:11:22 | specfit: Test various exception cases |
01-Oct-2024 00:11:22 | PASSED |
01-Oct-2024 00:11:22 | |
01-Oct-2024 00:11:22 | test_task_specfit.py::specfit_test::test_multiregion |
01-Oct-2024 00:11:22 | Test that multiple regions are supported - CAS-6115 |
01-Oct-2024 00:11:22 | PASSED |
01-Oct-2024 00:11:22 | |
01-Oct-2024 00:11:22 | 2024-10-01 04:11:22 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them (additional warnings of this type during this run will not be logged). |
01-Oct-2024 00:11:40 | ....10....20....30....40....50....60....70....80....90....100% |
01-Oct-2024 00:11:41 | test_task_specfit.py::specfit_test::test_noinf |
01-Oct-2024 00:11:41 | Test that output images have infs and nans masked |
01-Oct-2024 00:11:41 | PASSED |
01-Oct-2024 00:11:41 | |
01-Oct-2024 00:11:41 | 2024-10-01 04:11:42 SEVERE specfit::image::fitprofile Exception Reported: The input image shape ([9, 9, 100, 1]) and mask shape ([9, 9, 1, 1]) are different, and it was specified that the mask should not be extended, so the mask cannot be applied to the (sub)image. Specifying that the mask should be extended may resolve the issue at File: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casa6/casatools/src/code/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 306 |
01-Oct-2024 00:11:41 | 2024-10-01 04:11:42 WARN specfit::ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
01-Oct-2024 00:11:41 | test_task_specfit.py::specfit_test::test_stretch |
01-Oct-2024 00:11:41 | specfit : test mask stretch |
01-Oct-2024 00:11:41 | PASSED |
01-Oct-2024 00:11:41 | |
01-Oct-2024 00:11:41 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_specfit/nose.xml - |
01-Oct-2024 00:11:41 | ======================== 20 passed, 1 warning in 28.18s ======================== |
01-Oct-2024 00:11:41 | ============================= test session starts ============================== |
01-Oct-2024 00:11:41 | platform darwin -- Python 3.10.13, pytest-8.3.3, pluggy-1.5.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6testenv/bin/python |
01-Oct-2024 00:11:41 | cachedir: .pytest_cache |
01-Oct-2024 00:11:41 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_slsearch |
01-Oct-2024 00:11:41 | configfile: pytest.ini |
01-Oct-2024 00:11:43 | collecting ... collected 14 items |
01-Oct-2024 00:11:43 | |
01-Oct-2024 00:11:43 | |
01-Oct-2024 00:11:45 | test_task_slsearch.py::slsearch_test::test_chemnames |
01-Oct-2024 00:11:45 | test various settings of the chemnames parameter |
01-Oct-2024 00:11:45 | PASSED |
01-Oct-2024 00:11:45 | |
01-Oct-2024 00:11:47 | test_task_slsearch.py::slsearch_test::test_el |
01-Oct-2024 00:11:47 | test various settings of the el parameter |
01-Oct-2024 00:11:47 | PASSED |
01-Oct-2024 00:11:47 | |
01-Oct-2024 00:11:48 | test_task_slsearch.py::slsearch_test::test_eu |
01-Oct-2024 00:11:48 | test various settings of the eu parameter |
01-Oct-2024 00:11:48 | PASSED |
01-Oct-2024 00:11:48 | |
01-Oct-2024 00:11:48 | 2024-10-01 04:11:49 SEVERE Exception Reports: Table /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_slsearch/fred.tbl does not exist |
01-Oct-2024 00:11:48 | 2024-10-01 04:11:49 SEVERE slsearch:::: Exception Reports: Table /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_slsearch/fred.tbl does not exist |
01-Oct-2024 00:11:48 | 2024-10-01 04:11:49 SEVERE slsearch::::casa Task slsearch raised an exception of class RuntimeError with the following message: Error when running sl.search() |
01-Oct-2024 00:11:49 | 2024-10-01 04:11:50 SEVERE SearchEngine::search Cannot create table foo/bar/bad |
01-Oct-2024 00:11:49 | 2024-10-01 04:11:50 SEVERE spectralline::search Exception Reports: 2024-10-01 04:11:50 SEVERE SearchEngine::search Cannot create table foo/bar/bad |
01-Oct-2024 00:11:49 | 2024-10-01 04:11:50 SEVERE slsearch::SearchEngine::search Cannot create table foo/bar/bad |
01-Oct-2024 00:11:49 | 2024-10-01 04:11:50 SEVERE slsearch::spectralline::search Exception Reports: 2024-10-01 04:11:50 SEVERE slsearch::SearchEngine::search Cannot create table foo/bar/bad |
01-Oct-2024 00:11:49 | 2024-10-01 04:11:50 SEVERE slsearch::::casa Task slsearch raised an exception of class RuntimeError with the following message: 2024-10-01 04:11:50 SEVERE slsearch::SearchEngine::search Cannot create table foo/bar/bad |
01-Oct-2024 00:11:50 | test_task_slsearch.py::slsearch_test::test_exceptions |
01-Oct-2024 00:11:50 | slsearch: Test various exception cases |
01-Oct-2024 00:11:50 | PASSED |
01-Oct-2024 00:11:50 | |
01-Oct-2024 00:11:52 | test_task_slsearch.py::slsearch_test::test_freqrange |
01-Oct-2024 00:11:52 | test various settings of the freqrange parameter |
01-Oct-2024 00:11:52 | PASSED |
01-Oct-2024 00:11:52 | |
01-Oct-2024 00:11:54 | test_task_slsearch.py::slsearch_test::test_intensity |
01-Oct-2024 00:11:54 | test various settings of the intensity parameter |
01-Oct-2024 00:11:54 | PASSED |
01-Oct-2024 00:11:54 | |
01-Oct-2024 00:11:55 | test_task_slsearch.py::slsearch_test::test_loga |
01-Oct-2024 00:11:55 | test various settings of the loga parameter |
01-Oct-2024 00:11:55 | PASSED |
01-Oct-2024 00:11:55 | |
01-Oct-2024 00:11:58 | test_task_slsearch.py::slsearch_test::test_logfile |
01-Oct-2024 00:11:58 | test various settings of the logfile and append parameters |
01-Oct-2024 00:11:58 | PASSED |
01-Oct-2024 00:11:58 | |
01-Oct-2024 00:11:59 | test_task_slsearch.py::slsearch_test::test_outfile |
01-Oct-2024 00:11:59 | test various settings of the outfile parameter |
01-Oct-2024 00:11:59 | PASSED |
01-Oct-2024 00:11:59 | |
01-Oct-2024 00:12:00 | test_task_slsearch.py::slsearch_test::test_qns |
01-Oct-2024 00:12:00 | test various settings of the qns parameter |
01-Oct-2024 00:12:00 | PASSED |
01-Oct-2024 00:12:00 | |
01-Oct-2024 00:12:02 | test_task_slsearch.py::slsearch_test::test_rrlonly |
01-Oct-2024 00:12:02 | test various settings of the rrlonly parameter |
01-Oct-2024 00:12:02 | PASSED |
01-Oct-2024 00:12:02 | |
01-Oct-2024 00:12:04 | test_task_slsearch.py::slsearch_test::test_smu2 |
01-Oct-2024 00:12:04 | test various settings of the smu2 parameter |
01-Oct-2024 00:12:04 | PASSED |
01-Oct-2024 00:12:04 | |
01-Oct-2024 00:12:06 | test_task_slsearch.py::slsearch_test::test_species |
01-Oct-2024 00:12:06 | test various settings of the species parameter |
01-Oct-2024 00:12:06 | PASSED |
01-Oct-2024 00:12:06 | |
01-Oct-2024 00:12:08 | test_task_slsearch.py::slsearch_test::test_table |
01-Oct-2024 00:12:08 | test various settings of the table parameter |
01-Oct-2024 00:12:08 | PASSED |
01-Oct-2024 00:12:08 | |
01-Oct-2024 00:12:08 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_slsearch/nose.xml - |
01-Oct-2024 00:12:08 | ======================== 14 passed, 1 warning in 26.34s ======================== |
01-Oct-2024 00:12:08 | ============================= test session starts ============================== |
01-Oct-2024 00:12:08 | platform darwin -- Python 3.10.13, pytest-8.3.3, pluggy-1.5.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6testenv/bin/python |
01-Oct-2024 00:12:08 | cachedir: .pytest_cache |
01-Oct-2024 00:12:08 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_smoothcal |
01-Oct-2024 00:12:08 | configfile: pytest.ini |
01-Oct-2024 00:12:09 | collecting ... collected 12 items |
01-Oct-2024 00:12:09 | |
01-Oct-2024 00:12:09 | |
01-Oct-2024 00:12:12 | test_task_smoothcal.py::smoothcal_test::test0 |
01-Oct-2024 00:12:12 | Test 0: Missing input table caught by parameter checking (exception thrown) |
01-Oct-2024 00:12:12 | |
01-Oct-2024 00:12:12 | PASSED |
01-Oct-2024 00:12:12 | |
01-Oct-2024 00:12:13 | test_task_smoothcal.py::smoothcal_test::test1 |
01-Oct-2024 00:12:13 | Test 1: Wrong input MS caught by parameter checking (exception thrown) |
01-Oct-2024 00:12:13 | |
01-Oct-2024 00:12:13 | PASSED |
01-Oct-2024 00:12:13 | |
01-Oct-2024 00:12:14 | 2024-10-01 04:12:15 WARN smoothcal:::: Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_smoothcal/ngc1333_ut_nct.gcal); attempting to update... |
01-Oct-2024 00:12:14 | 2024-10-01 04:12:15 WARN smoothcal::::+ SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
01-Oct-2024 00:12:15 | test_task_smoothcal.py::smoothcal_test::test10 |
01-Oct-2024 00:12:15 | Test10: Compare smoothed values with reference |
01-Oct-2024 00:12:15 | PASSED |
01-Oct-2024 00:12:15 | |
01-Oct-2024 00:12:15 | 2024-10-01 04:12:16 WARN MSIter::setFeedInfo time dependent feed table encountered - not correctly handled - continuing anyway |
01-Oct-2024 00:12:16 | test_task_smoothcal.py::smoothcal_test::test11 |
01-Oct-2024 00:12:16 | Test11: Smooth accor table |
01-Oct-2024 00:12:16 | PASSED |
01-Oct-2024 00:12:16 | |
01-Oct-2024 00:12:18 | test_task_smoothcal.py::smoothcal_test::test2 |
01-Oct-2024 00:12:18 | Test 2: Wrong input gcal caught by parameter checking (exception thrown) |
01-Oct-2024 00:12:18 | |
01-Oct-2024 00:12:18 | PASSED |
01-Oct-2024 00:12:18 | |
01-Oct-2024 00:12:21 | 2024-10-01 04:12:22 WARN smoothcal:::: Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_smoothcal/ngc1333_ut_nct.gcal); attempting to update... |
01-Oct-2024 00:12:21 | 2024-10-01 04:12:22 WARN smoothcal::::+ SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
01-Oct-2024 00:12:22 | test_task_smoothcal.py::smoothcal_test::test3 |
01-Oct-2024 00:12:22 | Test 3: Good input should return None |
01-Oct-2024 00:12:22 | PASSED |
01-Oct-2024 00:12:22 | |
01-Oct-2024 00:12:23 | test_task_smoothcal.py::smoothcal_test::test4 |
01-Oct-2024 00:12:23 | Test 4: Unsupported smoothtype |
01-Oct-2024 00:12:23 | PASSED |
01-Oct-2024 00:12:23 | |
01-Oct-2024 00:12:25 | 2024-10-01 04:12:26 WARN smoothcal:::: Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_smoothcal/ngc1333_ut_nct.gcal); attempting to update... |
01-Oct-2024 00:12:25 | 2024-10-01 04:12:26 WARN smoothcal::::+ SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
01-Oct-2024 00:12:26 | test_task_smoothcal.py::smoothcal_test::test5 |
01-Oct-2024 00:12:26 | Test 5: Non-default smoothtype |
01-Oct-2024 00:12:26 | PASSED |
01-Oct-2024 00:12:26 | |
01-Oct-2024 00:12:26 | 2024-10-01 04:12:26 SEVERE smoothcal::Calibrater::smooth Caught Exception: Please specify a strictly positive smoothtime. |
01-Oct-2024 00:12:26 | 2024-10-01 04:12:26 SEVERE smoothcal:::: Exception Reported: Error in Calibrater::smooth. |
01-Oct-2024 00:12:26 | 2024-10-01 04:12:26 SEVERE smoothcal::::casa Task smoothcal raised an exception of class RuntimeError with the following message: Error in Calibrater::smooth. |
01-Oct-2024 00:12:27 | test_task_smoothcal.py::smoothcal_test::test6 |
01-Oct-2024 00:12:27 | Test 6: Unsupported smoothtime |
01-Oct-2024 00:12:27 | PASSED |
01-Oct-2024 00:12:27 | |
01-Oct-2024 00:12:29 | 2024-10-01 04:12:29 WARN smoothcal:::: Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_smoothcal/ngc1333_ut_nct.gcal); attempting to update... |
01-Oct-2024 00:12:29 | 2024-10-01 04:12:29 WARN smoothcal::::+ SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
01-Oct-2024 00:12:30 | test_task_smoothcal.py::smoothcal_test::test7 |
01-Oct-2024 00:12:30 | Test 7: Non-default smoothtype and smoothtime |
01-Oct-2024 00:12:30 | PASSED |
01-Oct-2024 00:12:30 | |
01-Oct-2024 00:12:31 | 2024-10-01 04:12:32 WARN smoothcal:::: Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_smoothcal/ngc1333_ut_nct.gcal); attempting to update... |
01-Oct-2024 00:12:31 | 2024-10-01 04:12:32 WARN smoothcal::::+ SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
01-Oct-2024 00:12:31 | 2024-10-01 04:12:32 WARN smoothcal:::: Field Expression: Found out-of-range index(s) in the list (23 24 25 26 27 28 29 30 ) [TIP: Double-quoted strings forces name matching] |
01-Oct-2024 00:12:31 | 2024-10-01 04:12:32 SEVERE smoothcal::Calibrater::smooth Caught Exception: Field Expression: Partial or no match for Field ID list [23, 24, 25, 26, 27, 28, 29, 30] |
01-Oct-2024 00:12:31 | 2024-10-01 04:12:32 SEVERE smoothcal::Calibrater::smooth+ (near char. 5 in string "23~30") |
01-Oct-2024 00:12:31 | 2024-10-01 04:12:32 SEVERE smoothcal:::: Exception Reported: Error in Calibrater::smooth. |
01-Oct-2024 00:12:31 | 2024-10-01 04:12:32 SEVERE smoothcal::::casa Task smoothcal raised an exception of class RuntimeError with the following message: Error in Calibrater::smooth. |
01-Oct-2024 00:12:31 | test_task_smoothcal.py::smoothcal_test::test8 |
01-Oct-2024 00:12:31 | Unsupported field values |
01-Oct-2024 00:12:31 | PASSED |
01-Oct-2024 00:12:31 | |
01-Oct-2024 00:12:33 | 2024-10-01 04:12:33 WARN smoothcal:::: Found pre-v4.1 caltable (/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_smoothcal/ngc1333_ut_nct.gcal); attempting to update... |
01-Oct-2024 00:12:33 | 2024-10-01 04:12:33 WARN smoothcal::::+ SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
01-Oct-2024 00:12:33 | test_task_smoothcal.py::smoothcal_test::test9 |
01-Oct-2024 00:12:33 | Test 9: Non-default field selection |
01-Oct-2024 00:12:33 | PASSED |
01-Oct-2024 00:12:33 | |
01-Oct-2024 00:12:33 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_smoothcal/nose.xml - |
01-Oct-2024 00:12:33 | ======================== 12 passed, 1 warning in 25.01s ======================== |
01-Oct-2024 00:12:34 | ============================= test session starts ============================== |
01-Oct-2024 00:12:34 | platform darwin -- Python 3.10.13, pytest-8.3.3, pluggy-1.5.0 -- /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6testenv/bin/python |
01-Oct-2024 00:12:34 | cachedir: .pytest_cache |
01-Oct-2024 00:12:34 | rootdir: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_imrebin |
01-Oct-2024 00:12:34 | configfile: pytest.ini |
01-Oct-2024 00:12:35 | collecting ... collected 21 items |
01-Oct-2024 00:12:35 | |
01-Oct-2024 00:12:35 | |
01-Oct-2024 00:12:35 | test_task_imrebin.py::imrebin_test::test_axisRemain |
01-Oct-2024 00:12:35 | test_axisRemain |
01-Oct-2024 00:12:35 | ----------------- |
01-Oct-2024 00:12:35 | |
01-Oct-2024 00:12:35 | Check that if the number of elements in the factors array is fewer than the number of axes then the remaining axes are not rebinned |
01-Oct-2024 00:12:35 | PASSED |
01-Oct-2024 00:12:35 | |
01-Oct-2024 00:12:35 | test_task_imrebin.py::imrebin_test::test_box |
01-Oct-2024 00:12:35 | Test use of box |
01-Oct-2024 00:12:35 | PASSED |
01-Oct-2024 00:12:35 | |
01-Oct-2024 00:12:35 | test_task_imrebin.py::imrebin_test::test_chans |
01-Oct-2024 00:12:35 | test_chans |
01-Oct-2024 00:12:35 | ------------ |
01-Oct-2024 00:12:35 | |
01-Oct-2024 00:12:35 | Check that the channel selection paramter properly selects a subset of the data |
01-Oct-2024 00:12:35 | PASSED |
01-Oct-2024 00:12:35 | |
01-Oct-2024 00:12:35 | test_task_imrebin.py::imrebin_test::test_compValue |
01-Oct-2024 00:12:35 | test_compValue |
01-Oct-2024 00:12:35 | ---------------- |
01-Oct-2024 00:12:35 | |
01-Oct-2024 00:12:35 | Check that the task support images with complex values |
01-Oct-2024 00:12:35 | TODO come back to this one to make sure the complex component isn't being discarded |
01-Oct-2024 00:12:35 | PASSED |
01-Oct-2024 00:12:35 | |
01-Oct-2024 00:12:35 | test_task_imrebin.py::imrebin_test::test_crop |
01-Oct-2024 00:12:35 | Test crop parameter |
01-Oct-2024 00:12:35 | PASSED |
01-Oct-2024 00:12:35 | |
01-Oct-2024 00:12:35 | test_task_imrebin.py::imrebin_test::test_dropDeg |
01-Oct-2024 00:12:35 | test_dropDeg |
01-Oct-2024 00:12:35 | -------------- |
01-Oct-2024 00:12:35 | |
01-Oct-2024 00:12:35 | Check that degenerate axis are dropped |
01-Oct-2024 00:12:35 | PASSED |
01-Oct-2024 00:12:35 | |
01-Oct-2024 00:12:35 | test_task_imrebin.py::imrebin_test::test_dropdeg |
01-Oct-2024 00:12:35 | Test dropdeg parameter |
01-Oct-2024 00:12:35 | PASSED |
01-Oct-2024 00:12:35 | |
01-Oct-2024 00:12:35 | test_task_imrebin.py::imrebin_test::test_dropdeg2 |
01-Oct-2024 00:12:35 | axes that become degenerate when regridded are dropped if dropdeg=True: CAS-5836 |
01-Oct-2024 00:12:35 | PASSED |
01-Oct-2024 00:12:35 | |
01-Oct-2024 00:12:35 | 2024-10-01 04:12:36 SEVERE imrebin::image::rebin Exception Reported: Exception: Rebinning factor vector cannot be empty. |
01-Oct-2024 00:12:35 | 2024-10-01 04:12:36 SEVERE imrebin::image::rebin+ ... thrown by void casa::ImageRebinner<float>::setFactors(const casacore::Vector<casacore::Int> &) [T = float] at File: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRebinner.tcc, line: 22 |
01-Oct-2024 00:12:35 | 2024-10-01 04:12:36 SEVERE imrebin::::casa Task imrebin raised an exception of class RuntimeError with the following message: Exception: Rebinning factor vector cannot be empty. |
01-Oct-2024 00:12:35 | 2024-10-01 04:12:36 SEVERE imrebin::::casa+ ... thrown by void casa::ImageRebinner<float>::setFactors(const casacore::Vector<casacore::Int> &) [T = float] at File: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRebinner.tcc, line: 22 |
01-Oct-2024 00:12:35 | 2024-10-01 04:12:36 SEVERE imrebin::image::rebin Exception Reported: Exception: Factor vector length must be less than or equal to the number of input image axes. |
01-Oct-2024 00:12:35 | 2024-10-01 04:12:36 SEVERE imrebin::image::rebin+ ... thrown by void casa::ImageRebinner<float>::setFactors(const casacore::Vector<casacore::Int> &) [T = float] at File: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRebinner.tcc, line: 37 |
01-Oct-2024 00:12:35 | 2024-10-01 04:12:36 SEVERE imrebin::::casa Task imrebin raised an exception of class RuntimeError with the following message: Exception: Factor vector length must be less than or equal to the number of input image axes. |
01-Oct-2024 00:12:35 | 2024-10-01 04:12:36 SEVERE imrebin::::casa+ ... thrown by void casa::ImageRebinner<float>::setFactors(const casacore::Vector<casacore::Int> &) [T = float] at File: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRebinner.tcc, line: 37 |
01-Oct-2024 00:12:35 | 2024-10-01 04:12:36 SEVERE imrebin::::casa Task imrebin raised an exception of class RuntimeError with the following message: Exception: All binning factors must be positive.. |
01-Oct-2024 00:12:35 | 2024-10-01 04:12:36 SEVERE imrebin::::casa+ ... thrown by image *casac::image::rebin(const string &, const vector<long> &, const variant &, const variant &, bool, bool, bool, bool) at File: /tmp/build-via-sdist-v5e0kowj/casatools-6.7.0.6/src/tools/image/image_cmpt.cc, line: 4943 |
01-Oct-2024 00:12:35 | 2024-10-01 04:12:36 SEVERE imrebin::image::rebin Exception Reported: Exception: All rebinning factors are 1, which means rebinning cannot occur. |
01-Oct-2024 00:12:35 | 2024-10-01 04:12:36 SEVERE imrebin::image::rebin+ ... thrown by void casa::ImageRebinner<float>::setFactors(const casacore::Vector<casacore::Int> &) [T = float] at File: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRebinner.tcc, line: 31 |
01-Oct-2024 00:12:35 | 2024-10-01 04:12:36 SEVERE imrebin::::casa Task imrebin raised an exception of class RuntimeError with the following message: Exception: All rebinning factors are 1, which means rebinning cannot occur. |
01-Oct-2024 00:12:35 | 2024-10-01 04:12:36 SEVERE imrebin::::casa+ ... thrown by void casa::ImageRebinner<float>::setFactors(const casacore::Vector<casacore::Int> &) [T = float] at File: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRebinner.tcc, line: 31 |
01-Oct-2024 00:12:35 | test_task_imrebin.py::imrebin_test::test_factor |
01-Oct-2024 00:12:35 | test_factor |
01-Oct-2024 00:12:35 | ------------- |
01-Oct-2024 00:12:35 | |
01-Oct-2024 00:12:35 | Check that the factors array must contain at least one element, and fewer than (or equal to) the number of input image axes. |
01-Oct-2024 00:12:35 | All these values must be positive. |
01-Oct-2024 00:12:35 | PASSED |
01-Oct-2024 00:12:35 | |
01-Oct-2024 00:12:36 | test_task_imrebin.py::imrebin_test::test_floatValue |
01-Oct-2024 00:12:36 | test_floatValue |
01-Oct-2024 00:12:36 | ----------------- |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Check that the task supports images with float values |
01-Oct-2024 00:12:36 | PASSED |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | 2024-10-01 04:12:36 SEVERE imrebin::::casa Task imrebin raised an exception of class RuntimeError with the following message: Exception: All binning factors must be positive.. |
01-Oct-2024 00:12:36 | 2024-10-01 04:12:36 SEVERE imrebin::::casa+ ... thrown by image *casac::image::rebin(const string &, const vector<long> &, const variant &, const variant &, bool, bool, bool, bool) at File: /tmp/build-via-sdist-v5e0kowj/casatools-6.7.0.6/src/tools/image/image_cmpt.cc, line: 4943 |
01-Oct-2024 00:12:36 | test_task_imrebin.py::imrebin_test::test_general |
01-Oct-2024 00:12:36 | ia.rebin(): General tests |
01-Oct-2024 00:12:36 | PASSED |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | test_task_imrebin.py::imrebin_test::test_history |
01-Oct-2024 00:12:36 | Test history writing |
01-Oct-2024 00:12:36 | PASSED |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | test_task_imrebin.py::imrebin_test::test_mask |
01-Oct-2024 00:12:36 | test_mask |
01-Oct-2024 00:12:36 | ----------- |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Check that the mask parameter masks the correct areas based on the selection made |
01-Oct-2024 00:12:36 | 0.0 |
01-Oct-2024 00:12:36 | PASSED |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | 2024-10-01 04:12:36 SEVERE imrebin::ImageInputProcessor::_process Replaceable flag is false and there is already a file or directory named dx.im so the output image will not be written |
01-Oct-2024 00:12:36 | 2024-10-01 04:12:36 SEVERE imrebin::image::rebin Exception Reported: 2024-10-01 04:12:36 SEVERE imrebin::ImageInputProcessor::_process Replaceable flag is false and there is already a file or directory named dx.im so the output image will not be written |
01-Oct-2024 00:12:36 | 2024-10-01 04:12:36 SEVERE imrebin::::casa Task imrebin raised an exception of class RuntimeError with the following message: 2024-10-01 04:12:36 SEVERE imrebin::ImageInputProcessor::_process Replaceable flag is false and there is already a file or directory named dx.im so the output image will not be written |
01-Oct-2024 00:12:36 | test_task_imrebin.py::imrebin_test::test_multibeam |
01-Oct-2024 00:12:36 | Test multiple beams |
01-Oct-2024 00:12:36 | PASSED |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | test_task_imrebin.py::imrebin_test::test_newsize |
01-Oct-2024 00:12:36 | test_newsize |
01-Oct-2024 00:12:36 | -------------- |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Check that the new image is downscaled in size by the appropriate factor |
01-Oct-2024 00:12:36 | 10 5 |
01-Oct-2024 00:12:36 | PASSED |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | test_task_imrebin.py::imrebin_test::test_outAverage |
01-Oct-2024 00:12:36 | test_outAverage |
01-Oct-2024 00:12:36 | ----------------- |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Check that the Output pixel values are the average of the input pixel values |
01-Oct-2024 00:12:36 | PASSED |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | 2024-10-01 04:12:36 SEVERE imrebin::ImageInputProcessor::_process Replaceable flag is false and there is already a file or directory named rebinned.im so the output image will not be written |
01-Oct-2024 00:12:36 | 2024-10-01 04:12:36 SEVERE imrebin::image::rebin Exception Reported: 2024-10-01 04:12:36 SEVERE imrebin::ImageInputProcessor::_process Replaceable flag is false and there is already a file or directory named rebinned.im so the output image will not be written |
01-Oct-2024 00:12:36 | 2024-10-01 04:12:36 SEVERE imrebin::::casa Task imrebin raised an exception of class RuntimeError with the following message: 2024-10-01 04:12:36 SEVERE imrebin::ImageInputProcessor::_process Replaceable flag is false and there is already a file or directory named rebinned.im so the output image will not be written |
01-Oct-2024 00:12:36 | test_task_imrebin.py::imrebin_test::test_overwrite |
01-Oct-2024 00:12:36 | test_overwrite |
01-Oct-2024 00:12:36 | ---------------- |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Check that overwrite = True is required to overwrite the output file |
01-Oct-2024 00:12:36 | PASSED |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | 2024-10-01 04:12:36 SEVERE imrebin::image::rebin Exception Reported: Exception: A polarization axis cannot be rebinned. |
01-Oct-2024 00:12:36 | 2024-10-01 04:12:36 SEVERE imrebin::image::rebin+ ... thrown by void casa::ImageRebinner<float>::setFactors(const casacore::Vector<casacore::Int> &) [T = float] at File: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRebinner.tcc, line: 55 |
01-Oct-2024 00:12:36 | 2024-10-01 04:12:36 SEVERE imrebin::::casa Task imrebin raised an exception of class RuntimeError with the following message: Exception: A polarization axis cannot be rebinned. |
01-Oct-2024 00:12:36 | 2024-10-01 04:12:36 SEVERE imrebin::::casa+ ... thrown by void casa::ImageRebinner<float>::setFactors(const casacore::Vector<casacore::Int> &) [T = float] at File: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casainstall/include/casacpp/imageanalysis/ImageAnalysis/ImageRebinner.tcc, line: 55 |
01-Oct-2024 00:12:36 | test_task_imrebin.py::imrebin_test::test_polNoRebin |
01-Oct-2024 00:12:36 | test_polNoRebin |
01-Oct-2024 00:12:36 | ----------------- |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Check that the polarization axis cannot be rebinned |
01-Oct-2024 00:12:36 | PASSED |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | test_task_imrebin.py::imrebin_test::test_region |
01-Oct-2024 00:12:36 | test_region |
01-Oct-2024 00:12:36 | ------------- |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Check that the region parameter selects the region to be rebinned |
01-Oct-2024 00:12:36 | PASSED |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | test_task_imrebin.py::imrebin_test::test_stokes |
01-Oct-2024 00:12:36 | test_stokes |
01-Oct-2024 00:12:36 | ------------- |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Check that the stokes selection parameter properly selects a subset of the data |
01-Oct-2024 00:12:36 | PASSED |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | 2024-10-01 04:12:36 SEVERE imrebin::image::rebin Exception Reported: The input image shape ([200, 200, 1, 10]) and mask shape ([200, 200, 1, 1]) are different, and it was specified that the mask should not be extended, so the mask cannot be applied to the (sub)image. Specifying that the mask should be extended may resolve the issue at File: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casainstall/include/casacpp/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 306 |
01-Oct-2024 00:12:36 | 2024-10-01 04:12:36 SEVERE imrebin::::casa Task imrebin raised an exception of class RuntimeError with the following message: The input image shape ([200, 200, 1, 10]) and mask shape ([200, 200, 1, 1]) are different, and it was specified that the mask should not be extended, so the mask cannot be applied to the (sub)image. Specifying that the mask should be extended may resolve the issue at File: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMBC-BPOSX13ARMP310/casainstall/include/casacpp/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 306 |
01-Oct-2024 00:12:36 | test_task_imrebin.py::imrebin_test::test_stretch |
01-Oct-2024 00:12:36 | ia.rebin(): Test stretch parameter |
01-Oct-2024 00:12:36 | PASSED |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | - generated xml file: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_imrebin/nose.xml - |
01-Oct-2024 00:12:36 | ======================== 21 passed, 1 warning in 2.04s ========================= |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_bandpass/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_bandpass/ |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_uvcontsub_old/ |
01-Oct-2024 00:12:36 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_uvcontsub_old |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_uvcontsub_old/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_uvcontsub_old/ |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdsidebandsplit/ |
01-Oct-2024 00:12:36 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdsidebandsplit |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_sdsidebandsplit/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdsidebandsplit/ |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_clearcal/ |
01-Oct-2024 00:12:36 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_clearcal |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_clearcal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_clearcal/ |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_specflux/ |
01-Oct-2024 00:12:36 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_specflux |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_specflux/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_specflux/ |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdatmcor/ |
01-Oct-2024 00:12:36 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdatmcor |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_sdatmcor/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_sdatmcor/ |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_listpartition/ |
01-Oct-2024 00:12:36 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_listpartition |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_listpartition/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_listpartition/ |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_partition/ |
01-Oct-2024 00:12:36 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_partition |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_partition/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_partition/ |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_getantposalma/ |
01-Oct-2024 00:12:36 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_getantposalma |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_getantposalma/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_getantposalma/ |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_calstat/ |
01-Oct-2024 00:12:36 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_calstat |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_calstat/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_calstat/ |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_simobserve/ |
01-Oct-2024 00:12:36 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_simobserve |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_simobserve/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_simobserve/ |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_applycal/ |
01-Oct-2024 00:12:36 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_applycal |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_applycal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_applycal/ |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_gaincal/ |
01-Oct-2024 00:12:36 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_gaincal |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_gaincal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_gaincal/ |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagcmd/ |
01-Oct-2024 00:12:36 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagcmd |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_flagcmd/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_flagcmd/ |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_specfit/ |
01-Oct-2024 00:12:36 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_specfit |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_specfit/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_specfit/ |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_slsearch/ |
01-Oct-2024 00:12:36 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_slsearch |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_slsearch/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_slsearch/ |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_smoothcal/ |
01-Oct-2024 00:12:36 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_smoothcal |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_smoothcal/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_smoothcal/ |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Setting Working Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_imrebin/ |
01-Oct-2024 00:12:36 | Test Directory: /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_imrebin |
01-Oct-2024 00:12:36 | |
01-Oct-2024 00:12:36 | Running Command: pytest --junitxml=/Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/xml/test_task_imrebin/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310/casa6/casatestutils/nosedir/test_task_imrebin/ |
01-Oct-2024 00:12:36 | Finished task 'Test wheel' with result: Success |
01-Oct-2024 00:12:36 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
01-Oct-2024 00:12:36 | Parsing test results under /Users/casaci/bamboohome/xml-data/build-dir/CASA-CMT310-TTASKSARMM13PY310... |
01-Oct-2024 00:12:36 | Finished task 'Parse tests' with result: Success |
01-Oct-2024 00:12:36 | Skipping execution of task 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' as it is disabled |
01-Oct-2024 00:12:36 | Running post build plugin 'Docker Container Cleanup' |
01-Oct-2024 00:12:36 | Running post build plugin 'NCover Results Collector' |
01-Oct-2024 00:12:36 | Running post build plugin 'Build Results Label Collector' |
01-Oct-2024 00:12:36 | Running post build plugin 'Clover Results Collector' |
01-Oct-2024 00:12:36 | Running post build plugin 'npm Cache Cleanup' |
01-Oct-2024 00:12:36 | Running post build plugin 'Artifact Copier' |
01-Oct-2024 00:12:36 | Publishing an artifact: OSX13 casatasks wheel |
01-Oct-2024 00:12:37 | Finished publishing of artifact Required job artifact Http Compression On : [OSX13 casatasks wheel], patterns: [casatasks*.whl] anchored at: [wheeldirectory/] in 157.4 ms |
01-Oct-2024 00:12:37 | Finalising the build... |
01-Oct-2024 00:12:37 | Stopping timer. |
01-Oct-2024 00:12:37 | Build CASA-CMT310-TTASKSARMM13PY310-83 completed. |
01-Oct-2024 00:12:37 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
01-Oct-2024 00:12:37 | Running on server: post build plugin 'NCover Results Collector' |
01-Oct-2024 00:12:37 | Running on server: post build plugin 'Build Labeller' |
01-Oct-2024 00:12:37 | Running on server: post build plugin 'Clover Delta Calculator' |
01-Oct-2024 00:12:37 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
01-Oct-2024 00:12:37 | All post build plugins have finished |
01-Oct-2024 00:12:37 | Generating build results summary... |
01-Oct-2024 00:12:38 | Saving build results to disk... |
01-Oct-2024 00:12:38 | Store variable context... |
01-Oct-2024 00:12:38 | Finished building CASA-CMT310-TTASKSARMM13PY310-83. |