fatal: could not read Username for 'https://open-bitbucket.nrao.edu': No such device or address
Error response from daemon: No such container: wheel-container-test
Error response from daemon: No such container: wheel-container-test
2023-06-21 13:40:36        INFO        ImagePolarimetry::sigmaLinPolInt         Determined noise from Q&U images to be
2023-06-21 13:40:36        INFO        ImagePolarimetry::sigmaLinPolInt         Determined noise from Q&U images to be
2023-06-21 13:40:36        INFO        ImageFITSConverter::readBeamsTable        Loading multiple beams from BEAMS table
2023-06-21 13:40:36        INFO        ImageFITSConverter::readBeamsTable        Loading multiple beams from BEAMS table
2023-06-21 13:40:36        SEVERE        imagepol::sigmadepolratio        Exception Reported: Exception: Beams or beamsets are not equal between the two images, caonnot perform calculation.
2023-06-21 13:40:36        SEVERE        imagepol::sigmadepolratio+        ... thrown by static void casa::ImagePolarimetry::_checkBeams(const casa::ImagePolarimetry&, const casa::ImagePolarimetry&, const casacore::Vector<casa::ImagePolarimetry::StokesTypes>&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1686
2023-06-21 13:40:36        INFO        ImageFITSConverter::readBeamsTable        Loading multiple beams from BEAMS table
2023-06-21 13:40:36        INFO        ImagePolarimetry::sigmaLinPolInt         Determined noise from Q&U images to be
2023-06-21 13:40:36        INFO        imagepol::sigmaFracLinPol        Creating image 'g' of shape [10, 10, 10, 1]
2023-06-21 13:40:36        INFO        ImageFITSConverter::readBeamsTable        Loading multiple beams from BEAMS table
2023-06-21 13:40:36        SEVERE        imagepol::sigmafraclinpol        Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal..
2023-06-21 13:40:36        SEVERE        imagepol::sigmafraclinpol+        ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626
2023-06-21 13:40:36        INFO        ImageFITSConverter::readBeamsTable        Loading multiple beams from BEAMS table
2023-06-21 13:40:36        INFO        ImagePolarimetry::sigma         Determined noise from V image to be 1.0119
2023-06-21 13:40:36        INFO        imagepol::sigmaFracTotPol        Creating image 'g' of shape [10, 10, 10, 1]
2023-06-21 13:40:36        INFO        ImageFITSConverter::readBeamsTable        Loading multiple beams from BEAMS table
2023-06-21 13:40:36        WARN        ImagePolarimetry::_setDoLinDoCirc (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line 272)        I, Q, and U beams are not the same, cannot do linear portion
2023-06-21 13:40:36        WARN        ImagePolarimetry::_setDoLinDoCirc (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line 272)        I and V beams are not the same, cannot do circular portion
2023-06-21 13:40:36        SEVERE        imagepol::sigmafractotpol        Exception Reported: Exception: Can do neither linear nor circular portions.
2023-06-21 13:40:36        SEVERE        imagepol::sigmafractotpol+        ... thrown by void casa::ImagePolarimetry::_setDoLinDoCirc(casacore::Bool&, casacore::Bool&) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 292
2023-06-21 13:40:36        INFO        ImageFITSConverter::readBeamsTable        Loading multiple beams from BEAMS table
2023-06-21 13:40:36        INFO        ImagePolarimetry::sigmaLinPolInt         Determined noise from Q&U images to be
2023-06-21 13:40:36        INFO        ImageFITSConverter::readBeamsTable        Loading multiple beams from BEAMS table
2023-06-21 13:40:36        SEVERE        imagepol::sigmalinpolint        Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal..
2023-06-21 13:40:36        SEVERE        imagepol::sigmalinpolint+        ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626
2023-06-21 13:40:36        INFO        ImageFITSConverter::readBeamsTable        Loading multiple beams from BEAMS table
2023-06-21 13:40:36        INFO        ImagePolarimetry::sigma         Determined noise from V image to be 1.0119
2023-06-21 13:40:36        INFO        imagepol::sigmaLinPolPosAng        Creating image 'g' of shape [10, 10, 10, 1]
2023-06-21 13:40:36        INFO        ImageFITSConverter::readBeamsTable        Loading multiple beams from BEAMS table
2023-06-21 13:40:36        SEVERE        imagepol::sigmalinpolposang        Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal..
2023-06-21 13:40:36        SEVERE        imagepol::sigmalinpolposang+        ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626
2023-06-21 13:40:36        INFO        ImageFITSConverter::readBeamsTable        Loading multiple beams from BEAMS table
2023-06-21 13:40:36        INFO        ImagePolTask::_sigma         Determined noise from V image to be 1.0119
2023-06-21 13:40:36        INFO        ImagePolTask::_sigma         Debiasing with sigma = 1.0119
2023-06-21 13:40:36        INFO        ImageFITSConverter::readBeamsTable        Loading multiple beams from BEAMS table
2023-06-21 13:40:38        WARN        ImageRegrid::regrid        You are regridding an image whose beam is not well sampled by the pixel size.  Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
2023-06-21 13:40:41        WARN        ImageRegrid::regrid        You are regridding an image whose beam is not well sampled by the pixel size.  Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
2023-06-21 13:40:42        WARN        ImageRegrid::regrid        You are regridding an image whose beam is not well sampled by the pixel size.  Total flux can be lost when regridding such images, especially when the new pixel size is larger than the old pixel size. It is recommended to check the total flux of your input and output image, and if necessary rebin the input to have smaller pixels.
2023-06-21 13:40:56        INFO        SubImageFactory::createImage        Creating image 'blahxx.im' of shape [1536, 1536, 1, 2]
2023-06-21 13:40:56        INFO        name::        No table opened.
2023-06-21 13:40:56        INFO        showcache::        The Table Cache is empty.
2023-06-21 13:40:56        INFO        name::        No table opened.
2023-06-21 13:40:56        INFO        showcache::        The Table Cache is empty.
2023-06-21 13:40:56        SEVERE        image::open (file /tmp/build-via-sdist-dy3vxxx5/casatools-6.5.6.7a14106.dev12/src/tools/image/image_cmpt.cc, line 4208)        Exception Reported: Exception: File name is empty.
2023-06-21 13:40:56        SEVERE        image::open (file /tmp/build-via-sdist-dy3vxxx5/casatools-6.5.6.7a14106.dev12/src/tools/image/image_cmpt.cc, line 4208)+        ... thrown by static void casa::ImageFactory::_checkInfile(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 371
2023-06-21 13:40:56        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2023-06-21 13:40:56        SEVERE        image::transpose (file /tmp/build-via-sdist-dy3vxxx5/casatools-6.5.6.7a14106.dev12/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-06-21 13:40:56        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2023-06-21 13:40:56        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2023-06-21 13:40:56        SEVERE        image::transpose (file /tmp/build-via-sdist-dy3vxxx5/casatools-6.5.6.7a14106.dev12/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-06-21 13:40:56        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2023-06-21 13:40:56        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2023-06-21 13:40:56        SEVERE        image::transpose (file /tmp/build-via-sdist-dy3vxxx5/casatools-6.5.6.7a14106.dev12/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-06-21 13:40:56        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2023-06-21 13:40:56        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2023-06-21 13:40:56        SEVERE        image::transpose (file /tmp/build-via-sdist-dy3vxxx5/casatools-6.5.6.7a14106.dev12/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-06-21 13:40:56        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2023-06-21 13:40:56        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2023-06-21 13:40:56        SEVERE        image::transpose (file /tmp/build-via-sdist-dy3vxxx5/casatools-6.5.6.7a14106.dev12/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-06-21 13:40:56        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2023-06-21 13:40:56        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2023-06-21 13:40:56        SEVERE        image::transpose (file /tmp/build-via-sdist-dy3vxxx5/casatools-6.5.6.7a14106.dev12/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-06-21 13:40:56        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2023-06-21 13:40:56        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2023-06-21 13:40:56        SEVERE        image::transpose (file /tmp/build-via-sdist-dy3vxxx5/casatools-6.5.6.7a14106.dev12/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-06-21 13:40:56        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2023-06-21 13:40:56        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2023-06-21 13:40:56        SEVERE        image::transpose (file /tmp/build-via-sdist-dy3vxxx5/casatools-6.5.6.7a14106.dev12/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-06-21 13:40:56        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2023-06-21 13:40:56        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Ambiguous axis specification. Both r and r match image axis name right ascension
2023-06-21 13:40:56        SEVERE        image::transpose (file /tmp/build-via-sdist-dy3vxxx5/casatools-6.5.6.7a14106.dev12/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-06-21 13:40:56        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Ambiguous axis specification. Both r and r match image axis name right ascension
2023-06-21 13:40:56        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2023-06-21 13:40:56        SEVERE        image::transpose (file /tmp/build-via-sdist-dy3vxxx5/casatools-6.5.6.7a14106.dev12/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-06-21 13:40:56        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2023-06-21 13:40:56        INFO        name::        No table opened.
2023-06-21 13:40:56        INFO        showcache::        The Table Cache is empty.
2023-06-21 13:40:56        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2023-06-21 13:40:56        INFO        ::::ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2023-06-21 13:40:56        INFO        ::::image::fromshape        Ran ia.fromshape
2023-06-21 13:40:56        INFO        ::::image::fromshape        ia.fromshape(outfile="", shape=[10,10,4,10], csys={...}, linear=false, overwrite=false, log=true, type="f")
2023-06-21 13:40:56        INFO        ::::image::transpose        Ran ia.transpose
2023-06-21 13:40:56        INFO        ::::image::transpose        ia.transpose(outfile="", order="3210")
2023-06-21 13:40:56        INFO        name::        No table opened.
2023-06-21 13:40:56        INFO        showcache::        The Table Cache is empty.
2023-06-21 13:40:56        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 20, 30] with float valued pixels.
2023-06-21 13:40:56        INFO        BeamManipulator::set        Setting (global) restoring beam.
2023-06-21 13:40:56        INFO        BeamManipulator::set        Beam parameters:  Major          : 4 arcmin
2023-06-21 13:40:56        INFO        BeamManipulator::set+          Minor          : 3 arcmin
2023-06-21 13:40:56        INFO        BeamManipulator::set+          Position Angle : 0 deg
2023-06-21 13:40:56        INFO        name::        No table opened.
2023-06-21 13:40:56        INFO        showcache::        The Table Cache is empty.
2023-06-21 13:40:56        INFO        SubImageFactory::createImage        Creating image 'straight_copy_0' of shape [5, 6, 7]
2023-06-21 13:40:56        INFO        SubImageFactory::createImage        Creating image 'straight_copy_1' of shape [5, 6, 7]
2023-06-21 13:40:56        INFO        SubImageFactory::createImage        Creating image 'straight_copy_2' of shape [5, 6, 7]
2023-06-21 13:40:56        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2023-06-21 13:40:56        INFO        SubImageFactory::createImage        Creating image 'straight_copy_3' of shape [5, 6, 7]
2023-06-21 13:40:56        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2023-06-21 13:40:56        INFO        name::        No table opened.
2023-06-21 13:40:56        INFO        showcache::        The Table Cache is empty.
2023-06-21 13:40:56        INFO        SubImageFactory::createImage        Creating image 'transpose_0' of shape [6, 7, 5]
2023-06-21 13:40:56        INFO        SubImageFactory::createImage        Creating image 'transpose_1' of shape [6, 7, 5]
2023-06-21 13:40:56        INFO        SubImageFactory::createImage        Creating image 'transpose_2' of shape [6, 7, 5]
2023-06-21 13:40:56        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2023-06-21 13:40:56        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2023-06-21 13:40:56        INFO        SubImageFactory::createImage        Creating image 'transpose_3' of shape [6, 7, 5]
2023-06-21 13:40:56        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2023-06-21 13:40:56        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2023-06-21 13:40:56        INFO        name::        No table opened.
2023-06-21 13:40:56        INFO        showcache::        The Table Cache is empty.
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed

  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100 6002k  100 6002k    0     0  14.7M      0 --:--:-- --:--:-- --:--:-- 14.8M
/export/home/cbt-el7-2/bamboohome/temp/CASA-CMDTF23-TTML2-1-ScriptBuildTask-5061080374565498126.sh: line 9: [: -eq: unary operator expected
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
Traceback (most recent call last):
  File "/usr/local/bin/twine", line 5, in <module>
    from twine.__main__ import main
  File "/usr/local/lib/python3.8/site-packages/twine/__main__.py", line 20, in <module>
    import requests
  File "/usr/local/lib/python3.8/site-packages/requests/__init__.py", line 43, in <module>
    import urllib3
  File "/usr/local/lib/python3.8/site-packages/urllib3/__init__.py", line 41, in <module>
    raise ImportError(
ImportError: urllib3 v2.0 only supports OpenSSL 1.1.1+, currently the 'ssl' module is compiled with 'OpenSSL 1.0.2k-fips  26 Jan 2017'. See: https://github.com/urllib3/urllib3/issues/2168