Build: #2 did not complete
Job: Test Tools Many Linux 2.28 was successful
Job result summary
- Completed
- Duration
- 18 minutes
- Agent
- cbt-el7-1.cv.nrao.edu
- Total tests
- 678
Tests
- 678 tests in total
- 4 tests were quarantined / skipped
- 10 minutes taken in total.
Error summary
The build generated some errors. See the full build log for more details.
From https://open-bitbucket.nrao.edu/scm/casa/casa-data
3db965b..989f9d3 master -> origin/master
Downloading geodetic/IERSpredict/table.dat (3.3 KB)
Downloading geodetic/IERSpredict/table.f0 (164 KB)
Downloading geodetic/IERSpredict/table.lock (325 B)
fatal: could not read Username for 'https://open-bitbucket.nrao.edu': No such device or address
Error response from daemon: No such container: wheel-container-test
Error response from daemon: No such container: wheel-container-test
2023-10-31 18:22:04 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63
2023-10-31 18:22:04 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63
2023-10-31 18:22:04 INFO GJonesSpline::solve() Number of timestamps in data = 60
2023-10-31 18:22:04 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec.
2023-10-31 18:22:04 INFO GJonesSpline::solve() Number of cubic spline control points = 4
2023-10-31 18:22:04 INFO GJonesSpline::solve() Number of cubic spline knots = 8
2023-10-31 18:22:04 INFO GJonesSpline::solve() Number of cubic spline segments = 1
2023-10-31 18:22:04 INFO GJonesSpline::solve() Fitting amplitude spline.
2023-10-31 18:22:04 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline.
2023-10-31 18:22:04 INFO GJonesSpline::solve() Fitting phase spline.
2023-10-31 18:22:04 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline
2023-10-31 18:22:04 INFO calibrater::solve Finished solving.
2023-10-31 18:22:04 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
2023-10-31 18:22:04 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2023-10-31 18:22:04 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2023-10-31 18:22:04 INFO Clearing all model records in MS header.
2023-10-31 18:22:04 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2023-10-31 18:22:05 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2023-10-31 18:22:06 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2023-10-31 18:22:06 INFO Calibrater:: Initializing nominal selection to the whole MS.
2023-10-31 18:22:06 INFO calibrater::specifycal Beginning specifycal-----------------------
2023-10-31 18:22:06 INFO Creating G Jones table from specified parameters.
2023-10-31 18:22:06 INFO Generating 'G' corrections.
2023-10-31 18:22:06 INFO Specified parameter(s) (per spw and pol) repeated on all antennas.
2023-10-31 18:22:06 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations.
2023-10-31 18:22:06 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9])
2023-10-31 18:22:06 INFO Writing solutions to table: testcalout.cal
2023-10-31 18:22:06 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2023-10-31 18:22:06 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2023-10-31 18:22:06 INFO calibrater::open ****Using OLD VI-driven calibrater tool****
2023-10-31 18:22:06 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2023-10-31 18:22:06 INFO Clearing all model records in MS header.
2023-10-31 18:22:06 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2023-10-31 18:22:08 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2023-10-31 18:22:08 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2023-10-31 18:22:08 INFO Calibrater:: Initializing nominal selection to the whole MS.
2023-10-31 18:22:08 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
2023-10-31 18:22:08 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
2023-10-31 18:22:09 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2023-10-31 18:22:09 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)-------
2023-10-31 18:22:09 INFO Calibrater::setsolve Arranging to SOLVE:
2023-10-31 18:22:09 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2023-10-31 18:22:09 INFO Calibrater::state The following calibration terms are arranged for apply:
2023-10-31 18:22:09 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2023-10-31 18:22:09 INFO Calibrater::state The following calibration term is arranged for solve:
2023-10-31 18:22:09 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2023-10-31 18:22:09 INFO calibrater::solve Beginning solve-----------------------------
2023-10-31 18:22:09 INFO Calibrater::solve The following calibration terms are arranged for apply:
2023-10-31 18:22:09 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2023-10-31 18:22:09 INFO Calibrater::solve The following calibration term is arranged for solve:
2023-10-31 18:22:09 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2023-10-31 18:22:09 INFO Solving for Mf Mueller
2023-10-31 18:22:09 INFO For solint = inf, found 84 solution intervals.
2023-10-31 18:22:10 INFO Found good Mf Mueller solutions in 84 intervals.
2023-10-31 18:22:10 INFO Writing solutions to table: output.ms
2023-10-31 18:22:10 INFO calibrater::solve Finished solving.
2023-10-31 18:22:10 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
2023-10-31 18:22:11 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2023-10-31 18:22:11 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2023-10-31 18:22:11 INFO Clearing all model records in MS header.
2023-10-31 18:22:11 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2023-10-31 18:22:12 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2023-10-31 18:22:12 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2023-10-31 18:22:12 INFO Calibrater:: Initializing nominal selection to the whole MS.
2023-10-31 18:22:12 INFO name:: No table opened.
2023-10-31 18:22:12 INFO showcache:: The Table Cache has the following 16 entries:
2023-10-31 18:22:12 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms"
2023-10-31 18:22:12 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA"
2023-10-31 18:22:12 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION"
2023-10-31 18:22:12 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED"
2023-10-31 18:22:12 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD"
2023-10-31 18:22:12 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD"
2023-10-31 18:22:12 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY"
2023-10-31 18:22:12 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION"
2023-10-31 18:22:12 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING"
2023-10-31 18:22:12 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION"
2023-10-31 18:22:12 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR"
2023-10-31 18:22:12 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE"
2023-10-31 18:22:12 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW"
2023-10-31 18:22:12 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE"
2023-10-31 18:22:12 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL"
2023-10-31 18:22:12 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER"
2023-10-31 18:22:12 INFO name:: No table opened.
2023-10-31 18:22:12 INFO showcache:: The Table Cache is empty.
2023-10-31 18:22:12 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2023-10-31 18:22:12 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2023-10-31 18:22:12 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2023-10-31 18:22:12 INFO Clearing all model records in MS header.
2023-10-31 18:22:13 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2023-10-31 18:22:14 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2023-10-31 18:22:14 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2023-10-31 18:22:14 INFO Calibrater:: Initializing nominal selection to the whole MS.
2023-10-31 18:22:14 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
2023-10-31 18:22:14 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
2023-10-31 18:22:14 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2023-10-31 18:22:14 INFO calibrater::correct Beginning correct---------------------------
2023-10-31 18:22:14 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
2023-10-31 18:22:14 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2023-10-31 18:22:17 INFO calibrater::correct Finished correcting.
2023-10-31 18:22:17 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
tar: work: Cannot stat: No such file or directory
tar: Exiting with failure status due to previous errors
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
WARNING: You are using pip version 22.0.4; however, version 23.3.1 is available.
You should consider upgrading via the '/usr/local/bin/python3.10 -m pip install --upgrade pip' command.
Cloning into 'casa-build-utils'...
3db965b..989f9d3 master -> origin/master
Downloading geodetic/IERSpredict/table.dat (3.3 KB)
Downloading geodetic/IERSpredict/table.f0 (164 KB)
Downloading geodetic/IERSpredict/table.lock (325 B)
fatal: could not read Username for 'https://open-bitbucket.nrao.edu': No such device or address
Error response from daemon: No such container: wheel-container-test
Error response from daemon: No such container: wheel-container-test
2023-10-31 18:22:04 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63
2023-10-31 18:22:04 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63
2023-10-31 18:22:04 INFO GJonesSpline::solve() Number of timestamps in data = 60
2023-10-31 18:22:04 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec.
2023-10-31 18:22:04 INFO GJonesSpline::solve() Number of cubic spline control points = 4
2023-10-31 18:22:04 INFO GJonesSpline::solve() Number of cubic spline knots = 8
2023-10-31 18:22:04 INFO GJonesSpline::solve() Number of cubic spline segments = 1
2023-10-31 18:22:04 INFO GJonesSpline::solve() Fitting amplitude spline.
2023-10-31 18:22:04 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline.
2023-10-31 18:22:04 INFO GJonesSpline::solve() Fitting phase spline.
2023-10-31 18:22:04 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline
2023-10-31 18:22:04 INFO calibrater::solve Finished solving.
2023-10-31 18:22:04 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
2023-10-31 18:22:04 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2023-10-31 18:22:04 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2023-10-31 18:22:04 INFO Clearing all model records in MS header.
2023-10-31 18:22:04 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2023-10-31 18:22:05 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2023-10-31 18:22:06 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2023-10-31 18:22:06 INFO Calibrater:: Initializing nominal selection to the whole MS.
2023-10-31 18:22:06 INFO calibrater::specifycal Beginning specifycal-----------------------
2023-10-31 18:22:06 INFO Creating G Jones table from specified parameters.
2023-10-31 18:22:06 INFO Generating 'G' corrections.
2023-10-31 18:22:06 INFO Specified parameter(s) (per spw and pol) repeated on all antennas.
2023-10-31 18:22:06 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations.
2023-10-31 18:22:06 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9])
2023-10-31 18:22:06 INFO Writing solutions to table: testcalout.cal
2023-10-31 18:22:06 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2023-10-31 18:22:06 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2023-10-31 18:22:06 INFO calibrater::open ****Using OLD VI-driven calibrater tool****
2023-10-31 18:22:06 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2023-10-31 18:22:06 INFO Clearing all model records in MS header.
2023-10-31 18:22:06 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2023-10-31 18:22:08 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2023-10-31 18:22:08 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2023-10-31 18:22:08 INFO Calibrater:: Initializing nominal selection to the whole MS.
2023-10-31 18:22:08 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
2023-10-31 18:22:08 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
2023-10-31 18:22:09 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2023-10-31 18:22:09 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)-------
2023-10-31 18:22:09 INFO Calibrater::setsolve Arranging to SOLVE:
2023-10-31 18:22:09 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2023-10-31 18:22:09 INFO Calibrater::state The following calibration terms are arranged for apply:
2023-10-31 18:22:09 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2023-10-31 18:22:09 INFO Calibrater::state The following calibration term is arranged for solve:
2023-10-31 18:22:09 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2023-10-31 18:22:09 INFO calibrater::solve Beginning solve-----------------------------
2023-10-31 18:22:09 INFO Calibrater::solve The following calibration terms are arranged for apply:
2023-10-31 18:22:09 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2023-10-31 18:22:09 INFO Calibrater::solve The following calibration term is arranged for solve:
2023-10-31 18:22:09 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2023-10-31 18:22:09 INFO Solving for Mf Mueller
2023-10-31 18:22:09 INFO For solint = inf, found 84 solution intervals.
2023-10-31 18:22:10 INFO Found good Mf Mueller solutions in 84 intervals.
2023-10-31 18:22:10 INFO Writing solutions to table: output.ms
2023-10-31 18:22:10 INFO calibrater::solve Finished solving.
2023-10-31 18:22:10 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
2023-10-31 18:22:11 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2023-10-31 18:22:11 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2023-10-31 18:22:11 INFO Clearing all model records in MS header.
2023-10-31 18:22:11 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2023-10-31 18:22:12 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2023-10-31 18:22:12 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2023-10-31 18:22:12 INFO Calibrater:: Initializing nominal selection to the whole MS.
2023-10-31 18:22:12 INFO name:: No table opened.
2023-10-31 18:22:12 INFO showcache:: The Table Cache has the following 16 entries:
2023-10-31 18:22:12 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms"
2023-10-31 18:22:12 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA"
2023-10-31 18:22:12 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION"
2023-10-31 18:22:12 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED"
2023-10-31 18:22:12 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD"
2023-10-31 18:22:12 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD"
2023-10-31 18:22:12 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY"
2023-10-31 18:22:12 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION"
2023-10-31 18:22:12 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING"
2023-10-31 18:22:12 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION"
2023-10-31 18:22:12 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR"
2023-10-31 18:22:12 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE"
2023-10-31 18:22:12 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW"
2023-10-31 18:22:12 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE"
2023-10-31 18:22:12 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL"
2023-10-31 18:22:12 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER"
2023-10-31 18:22:12 INFO name:: No table opened.
2023-10-31 18:22:12 INFO showcache:: The Table Cache is empty.
2023-10-31 18:22:12 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2023-10-31 18:22:12 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2023-10-31 18:22:12 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2023-10-31 18:22:12 INFO Clearing all model records in MS header.
2023-10-31 18:22:13 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2023-10-31 18:22:14 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2023-10-31 18:22:14 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2023-10-31 18:22:14 INFO Calibrater:: Initializing nominal selection to the whole MS.
2023-10-31 18:22:14 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
2023-10-31 18:22:14 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
2023-10-31 18:22:14 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2023-10-31 18:22:14 INFO calibrater::correct Beginning correct---------------------------
2023-10-31 18:22:14 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
2023-10-31 18:22:14 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2023-10-31 18:22:17 INFO calibrater::correct Finished correcting.
2023-10-31 18:22:17 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
tar: work: Cannot stat: No such file or directory
tar: Exiting with failure status due to previous errors
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
WARNING: You are using pip version 22.0.4; however, version 23.3.1 is available.
You should consider upgrading via the '/usr/local/bin/python3.10 -m pip install --upgrade pip' command.
Cloning into 'casa-build-utils'...