Build: #1 was successful
Job: Test Tools Many Linux 2.28 was successful
Build log
The build generated 52,611 lines of output.The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
| 24-Apr-2023 14:52:49 | 2023-04-24 18:52:49 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 24-Apr-2023 14:52:49 | 2023-04-24 18:52:49 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 24-Apr-2023 14:52:49 | 2023-04-24 18:52:49 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 24-Apr-2023 14:52:49 | 2023-04-24 18:52:49 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 24-Apr-2023 14:52:49 | 2023-04-24 18:52:49 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 24-Apr-2023 14:52:49 | 2023-04-24 18:52:49 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 24-Apr-2023 14:52:49 | 2023-04-24 18:52:49 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 24-Apr-2023 14:52:49 | 2023-04-24 18:52:49 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 24-Apr-2023 14:52:49 | 2023-04-24 18:52:49 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Apr-2023 14:52:49 | test_tool_calibrater.py::calibrater_test::test_done |
| 24-Apr-2023 14:52:49 | Check that done closes the active calibrator tool |
| 24-Apr-2023 14:52:49 | PASSED |
| 24-Apr-2023 14:52:49 | |
| 24-Apr-2023 14:52:49 | 2023-04-24 18:52:50 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 24-Apr-2023 14:52:49 | 2023-04-24 18:52:50 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 24-Apr-2023 14:52:49 | 2023-04-24 18:52:50 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:52:49 | 2023-04-24 18:52:50 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:52:49 | 2023-04-24 18:52:50 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:52:51 | 2023-04-24 18:52:51 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:52:51 | 2023-04-24 18:52:51 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Apr-2023 14:52:51 | 2023-04-24 18:52:51 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:52:51 | 2023-04-24 18:52:51 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Apr-2023 14:52:51 | 2023-04-24 18:52:51 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Apr-2023 14:52:51 | 2023-04-24 18:52:52 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:52:51 | 2023-04-24 18:52:52 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Apr-2023 14:52:51 | 2023-04-24 18:52:52 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Apr-2023 14:52:51 | 2023-04-24 18:52:52 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:52:54 | 2023-04-24 18:52:54 INFO calibrater::correct Finished correcting. |
| 24-Apr-2023 14:52:54 | 2023-04-24 18:52:55 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 24-Apr-2023 14:52:54 | 2023-04-24 18:52:55 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:52:54 | 2023-04-24 18:52:55 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:52:54 | 2023-04-24 18:52:55 INFO calibrater::initcalset Beginning initcalset------------------------ |
| 24-Apr-2023 14:52:54 | 2023-04-24 18:52:55 INFO VisSet::VisSet Initializing MODEL_DATA (to unity) and CORRECTED_DATA (to DATA) |
| 24-Apr-2023 14:52:55 | 2023-04-24 18:52:55 INFO VisSet::VisSet Initialized 328860 rows. |
| 24-Apr-2023 14:52:56 | 2023-04-24 18:52:57 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 24-Apr-2023 14:52:56 | test_tool_calibrater.py::calibrater_test::test_reinitModel |
| 24-Apr-2023 14:52:56 | Check that initcalset will reset the CORRECTED_DATA to unity |
| 24-Apr-2023 14:52:56 | PASSED |
| 24-Apr-2023 14:52:56 | |
| 24-Apr-2023 14:52:56 | 2023-04-24 18:52:57 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Apr-2023 14:52:56 | 2023-04-24 18:52:57 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:52:56 | 2023-04-24 18:52:57 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:52:57 | 2023-04-24 18:52:57 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:52:58 | 2023-04-24 18:52:59 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:52:58 | 2023-04-24 18:52:59 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Apr-2023 14:52:58 | 2023-04-24 18:52:59 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:52:58 | 2023-04-24 18:52:59 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Apr-2023 14:52:58 | 2023-04-24 18:52:59 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Apr-2023 14:52:58 | 2023-04-24 18:52:59 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:52:58 | 2023-04-24 18:52:59 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 24-Apr-2023 14:52:58 | 2023-04-24 18:52:59 INFO Calibrater::setsolve Arranging to SOLVE: |
| 24-Apr-2023 14:52:58 | 2023-04-24 18:52:59 INFO Calibrater::setsolve . Mf Mueller: table=gaincaltest2.ms.G0 append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 24-Apr-2023 14:52:58 | 2023-04-24 18:52:59 INFO calibrater::reset Reseting solve/apply state |
| 24-Apr-2023 14:52:58 | 2023-04-24 18:52:59 INFO calibrater::solve Beginning solve----------------------------- |
| 24-Apr-2023 14:52:58 | 2023-04-24 18:52:59 SEVERE Calibrater::solve Caught exception: Please run setsolve before attempting to solve. |
| 24-Apr-2023 14:52:58 | 2023-04-24 18:52:59 INFO Calibrater::solve Reseting entire solve/apply state. |
| 24-Apr-2023 14:52:58 | 2023-04-24 18:52:59 SEVERE Exception Reported: Error in Calibrater::solve. |
| 24-Apr-2023 14:52:58 | 2023-04-24 18:52:59 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Apr-2023 14:52:58 | 2023-04-24 18:52:59 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Apr-2023 14:52:58 | 2023-04-24 18:52:59 INFO Calibrater::correct2 (VI2/VB2) . (None) |
| 24-Apr-2023 14:52:59 | 2023-04-24 18:52:59 SEVERE Calibrater::correct2 (VI2/VB2) Caught exception: Nothing to Apply |
| 24-Apr-2023 14:52:59 | 2023-04-24 18:52:59 INFO Calibrater::correct2 (VI2/VB2) Resetting all calibration application settings. |
| 24-Apr-2023 14:52:59 | 2023-04-24 18:52:59 SEVERE Exception Reported: Error in Calibrater::correct. |
| 24-Apr-2023 14:52:59 | 2023-04-24 18:52:59 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Apr-2023 14:52:59 | test_tool_calibrater.py::calibrater_test::test_resetSolveApply |
| 24-Apr-2023 14:52:59 | Check that the reset function can clear set apply and solves |
| 24-Apr-2023 14:52:59 | PASSED |
| 24-Apr-2023 14:52:59 | |
| 24-Apr-2023 14:52:59 | 2023-04-24 18:53:00 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Apr-2023 14:52:59 | 2023-04-24 18:53:00 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:52:59 | 2023-04-24 18:53:00 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:52:59 | 2023-04-24 18:53:00 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:53:01 | 2023-04-24 18:53:01 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:53:01 | 2023-04-24 18:53:01 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Apr-2023 14:53:01 | 2023-04-24 18:53:01 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:53:02 | 2023-04-24 18:53:02 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Apr-2023 14:53:02 | 2023-04-24 18:53:02 INFO calibrater::reset Reseting solve/apply state |
| 24-Apr-2023 14:53:02 | 2023-04-24 18:53:02 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Apr-2023 14:53:02 | 2023-04-24 18:53:02 INFO Calibrater::selectvis+ Selecting on spw: '1' |
| 24-Apr-2023 14:53:02 | 2023-04-24 18:53:02 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
| 24-Apr-2023 14:53:02 | 2023-04-24 18:53:02 INFO Calibrater::selectvis Frequency selection: |
| 24-Apr-2023 14:53:02 | 2023-04-24 18:53:02 INFO Calibrater::selectvis . Spw 1:0~7 (8 channels, step by 1) |
| 24-Apr-2023 14:53:02 | 2023-04-24 18:53:02 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Apr-2023 14:53:02 | 2023-04-24 18:53:02 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Apr-2023 14:53:02 | test_tool_calibrater.py::calibrater_test::test_returnDict |
| 24-Apr-2023 14:53:02 | Check that the returndict function gives a dictonary with the expected keys |
| 24-Apr-2023 14:53:02 | PASSED |
| 24-Apr-2023 14:53:02 | |
| 24-Apr-2023 14:53:03 | 2023-04-24 18:53:03 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Apr-2023 14:53:03 | 2023-04-24 18:53:03 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:53:03 | 2023-04-24 18:53:03 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:53:03 | 2023-04-24 18:53:03 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:53:04 | 2023-04-24 18:53:05 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:53:05 | 2023-04-24 18:53:05 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Apr-2023 14:53:05 | 2023-04-24 18:53:05 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:53:05 | 2023-04-24 18:53:05 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Apr-2023 14:53:05 | 2023-04-24 18:53:05 INFO calibrater::reset Reseting solve/apply state |
| 24-Apr-2023 14:53:05 | 2023-04-24 18:53:05 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Apr-2023 14:53:05 | 2023-04-24 18:53:05 INFO Calibrater::selectvis+ Selecting on antenna/baseline: '0' |
| 24-Apr-2023 14:53:05 | 2023-04-24 18:53:05 INFO Calibrater::selectvis By selection 328860 rows are reduced to 65772 |
| 24-Apr-2023 14:53:05 | 2023-04-24 18:53:05 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 24-Apr-2023 14:53:05 | 2023-04-24 18:53:05 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Apr-2023 14:53:05 | 2023-04-24 18:53:05 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Apr-2023 14:53:05 | 2023-04-24 18:53:05 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Apr-2023 14:53:05 | 2023-04-24 18:53:05 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:53:05 | 2023-04-24 18:53:05 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Apr-2023 14:53:05 | 2023-04-24 18:53:05 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Apr-2023 14:53:05 | 2023-04-24 18:53:05 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:53:06 | 2023-04-24 18:53:07 INFO calibrater::correct Finished correcting. |
| 24-Apr-2023 14:53:08 | 2023-04-24 18:53:09 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Apr-2023 14:53:09 | test_tool_calibrater.py::calibrater_test::test_selectVisBaseline |
| 24-Apr-2023 14:53:09 | Check that selectvis properly selects baseline/antenna |
| 24-Apr-2023 14:53:09 | 65772 65772 |
| 24-Apr-2023 14:53:09 | 263088 263088 |
| 24-Apr-2023 14:53:09 | PASSED |
| 24-Apr-2023 14:53:09 | |
| 24-Apr-2023 14:53:09 | 2023-04-24 18:53:10 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Apr-2023 14:53:09 | 2023-04-24 18:53:10 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:53:09 | 2023-04-24 18:53:10 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:53:09 | 2023-04-24 18:53:10 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:53:11 | 2023-04-24 18:53:11 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:53:11 | 2023-04-24 18:53:12 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Apr-2023 14:53:11 | 2023-04-24 18:53:12 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:53:11 | 2023-04-24 18:53:12 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Apr-2023 14:53:11 | 2023-04-24 18:53:12 INFO calibrater::reset Reseting solve/apply state |
| 24-Apr-2023 14:53:11 | 2023-04-24 18:53:12 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Apr-2023 14:53:11 | 2023-04-24 18:53:12 INFO Calibrater::selectvis+ Selecting on field: '0' |
| 24-Apr-2023 14:53:11 | 2023-04-24 18:53:12 INFO Calibrater::selectvis By selection 328860 rows are reduced to 172260 |
| 24-Apr-2023 14:53:11 | 2023-04-24 18:53:12 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 24-Apr-2023 14:53:11 | 2023-04-24 18:53:12 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Apr-2023 14:53:11 | 2023-04-24 18:53:12 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Apr-2023 14:53:11 | 2023-04-24 18:53:12 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Apr-2023 14:53:11 | 2023-04-24 18:53:12 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:53:11 | 2023-04-24 18:53:12 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Apr-2023 14:53:11 | 2023-04-24 18:53:12 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Apr-2023 14:53:11 | 2023-04-24 18:53:12 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:53:13 | 2023-04-24 18:53:13 INFO calibrater::correct Finished correcting. |
| 24-Apr-2023 14:53:14 | 2023-04-24 18:53:14 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Apr-2023 14:53:14 | test_tool_calibrater.py::calibrater_test::test_selectVisField |
| 24-Apr-2023 14:53:14 | Check that the field is properly selected by selectvis |
| 24-Apr-2023 14:53:14 | PASSED |
| 24-Apr-2023 14:53:14 | |
| 24-Apr-2023 14:53:15 | 2023-04-24 18:53:15 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Apr-2023 14:53:15 | 2023-04-24 18:53:15 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:53:15 | 2023-04-24 18:53:15 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:53:15 | 2023-04-24 18:53:15 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:53:16 | 2023-04-24 18:53:17 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:53:17 | 2023-04-24 18:53:17 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Apr-2023 14:53:17 | 2023-04-24 18:53:17 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:53:17 | 2023-04-24 18:53:17 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Apr-2023 14:53:17 | 2023-04-24 18:53:17 INFO calibrater::reset Reseting solve/apply state |
| 24-Apr-2023 14:53:17 | 2023-04-24 18:53:17 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Apr-2023 14:53:17 | 2023-04-24 18:53:17 INFO Calibrater::selectvis+ Selecting on intent: '*AMPLI*' |
| 24-Apr-2023 14:53:17 | 2023-04-24 18:53:17 INFO Calibrater::selectvis Selection did not drop any rows |
| 24-Apr-2023 14:53:17 | 2023-04-24 18:53:17 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 24-Apr-2023 14:53:17 | 2023-04-24 18:53:17 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Apr-2023 14:53:17 | 2023-04-24 18:53:17 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Apr-2023 14:53:17 | 2023-04-24 18:53:17 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Apr-2023 14:53:17 | 2023-04-24 18:53:17 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:53:17 | 2023-04-24 18:53:17 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Apr-2023 14:53:17 | 2023-04-24 18:53:17 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Apr-2023 14:53:17 | 2023-04-24 18:53:17 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:53:20 | 2023-04-24 18:53:20 INFO calibrater::correct Finished correcting. |
| 24-Apr-2023 14:53:20 | 2023-04-24 18:53:20 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Apr-2023 14:53:20 | test_tool_calibrater.py::calibrater_test::test_selectVisIntent |
| 24-Apr-2023 14:53:20 | Check that the intent is properly selected by selectvis |
| 24-Apr-2023 14:53:20 | PASSED |
| 24-Apr-2023 14:53:20 | |
| 24-Apr-2023 14:53:21 | 2023-04-24 18:53:22 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Apr-2023 14:53:21 | 2023-04-24 18:53:22 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:53:21 | 2023-04-24 18:53:22 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:53:21 | 2023-04-24 18:53:22 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:53:22 | 2023-04-24 18:53:23 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:53:23 | 2023-04-24 18:53:23 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Apr-2023 14:53:23 | 2023-04-24 18:53:23 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:53:23 | 2023-04-24 18:53:23 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Apr-2023 14:53:23 | 2023-04-24 18:53:23 INFO calibrater::reset Reseting solve/apply state |
| 24-Apr-2023 14:53:23 | 2023-04-24 18:53:23 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Apr-2023 14:53:23 | 2023-04-24 18:53:23 INFO Calibrater::selectvis+ Selecting by observation IDs: '0' |
| 24-Apr-2023 14:53:23 | 2023-04-24 18:53:23 INFO Calibrater::selectvis By selection 328860 rows are reduced to 318870 |
| 24-Apr-2023 14:53:23 | 2023-04-24 18:53:23 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 24-Apr-2023 14:53:23 | 2023-04-24 18:53:23 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Apr-2023 14:53:23 | 2023-04-24 18:53:23 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Apr-2023 14:53:23 | 2023-04-24 18:53:23 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Apr-2023 14:53:23 | 2023-04-24 18:53:23 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:53:23 | 2023-04-24 18:53:23 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Apr-2023 14:53:23 | 2023-04-24 18:53:23 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Apr-2023 14:53:23 | 2023-04-24 18:53:23 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:53:25 | 2023-04-24 18:53:26 INFO calibrater::correct Finished correcting. |
| 24-Apr-2023 14:53:26 | 2023-04-24 18:53:26 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Apr-2023 14:53:26 | test_tool_calibrater.py::calibrater_test::test_selectVisObs |
| 24-Apr-2023 14:53:26 | PASSED |
| 24-Apr-2023 14:53:26 | |
| 24-Apr-2023 14:53:26 | 2023-04-24 18:53:27 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Apr-2023 14:53:26 | 2023-04-24 18:53:27 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:53:26 | 2023-04-24 18:53:27 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:53:26 | 2023-04-24 18:53:27 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:53:28 | 2023-04-24 18:53:28 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:53:28 | 2023-04-24 18:53:28 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Apr-2023 14:53:28 | 2023-04-24 18:53:28 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:53:28 | 2023-04-24 18:53:28 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Apr-2023 14:53:28 | 2023-04-24 18:53:28 INFO calibrater::reset Reseting solve/apply state |
| 24-Apr-2023 14:53:28 | 2023-04-24 18:53:28 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Apr-2023 14:53:28 | 2023-04-24 18:53:28 INFO Calibrater::selectvis+ Selecting on scan: '2' |
| 24-Apr-2023 14:53:28 | 2023-04-24 18:53:29 INFO Calibrater::selectvis By selection 328860 rows are reduced to 15660 |
| 24-Apr-2023 14:53:28 | 2023-04-24 18:53:29 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 24-Apr-2023 14:53:28 | 2023-04-24 18:53:29 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Apr-2023 14:53:28 | 2023-04-24 18:53:29 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Apr-2023 14:53:28 | 2023-04-24 18:53:29 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Apr-2023 14:53:28 | 2023-04-24 18:53:29 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:53:28 | 2023-04-24 18:53:29 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Apr-2023 14:53:28 | 2023-04-24 18:53:29 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Apr-2023 14:53:28 | 2023-04-24 18:53:29 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:53:28 | 2023-04-24 18:53:29 INFO calibrater::correct Finished correcting. |
| 24-Apr-2023 14:53:29 | 2023-04-24 18:53:30 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Apr-2023 14:53:29 | test_tool_calibrater.py::calibrater_test::test_selectVisScan |
| 24-Apr-2023 14:53:29 | Check tht the scan is properly selected by selectvis |
| 24-Apr-2023 14:53:29 | PASSED |
| 24-Apr-2023 14:53:29 | |
| 24-Apr-2023 14:53:30 | 2023-04-24 18:53:31 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Apr-2023 14:53:30 | 2023-04-24 18:53:31 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:53:30 | 2023-04-24 18:53:31 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:53:30 | 2023-04-24 18:53:31 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:53:31 | 2023-04-24 18:53:32 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:53:32 | 2023-04-24 18:53:32 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Apr-2023 14:53:32 | 2023-04-24 18:53:32 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:53:32 | 2023-04-24 18:53:32 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Apr-2023 14:53:32 | 2023-04-24 18:53:32 INFO calibrater::reset Reseting solve/apply state |
| 24-Apr-2023 14:53:32 | 2023-04-24 18:53:32 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Apr-2023 14:53:32 | 2023-04-24 18:53:32 INFO Calibrater::selectvis+ Selecting on spw: '0' |
| 24-Apr-2023 14:53:32 | 2023-04-24 18:53:32 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
| 24-Apr-2023 14:53:32 | 2023-04-24 18:53:32 INFO Calibrater::selectvis Frequency selection: |
| 24-Apr-2023 14:53:32 | 2023-04-24 18:53:32 INFO Calibrater::selectvis . Spw 0:0~7 (8 channels, step by 1) |
| 24-Apr-2023 14:53:32 | 2023-04-24 18:53:32 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Apr-2023 14:53:32 | 2023-04-24 18:53:32 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Apr-2023 14:53:32 | 2023-04-24 18:53:32 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Apr-2023 14:53:32 | 2023-04-24 18:53:32 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:53:32 | 2023-04-24 18:53:32 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Apr-2023 14:53:32 | 2023-04-24 18:53:32 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Apr-2023 14:53:32 | 2023-04-24 18:53:32 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:53:33 | 2023-04-24 18:53:33 INFO calibrater::correct Finished correcting. |
| 24-Apr-2023 14:53:33 | 2023-04-24 18:53:34 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Apr-2023 14:53:33 | test_tool_calibrater.py::calibrater_test::test_selectVisSpw |
| 24-Apr-2023 14:53:33 | Check that spw is properly selected by selectvis |
| 24-Apr-2023 14:53:33 | PASSED |
| 24-Apr-2023 14:53:33 | |
| 24-Apr-2023 14:53:34 | 2023-04-24 18:53:35 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Apr-2023 14:53:34 | 2023-04-24 18:53:35 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:53:34 | 2023-04-24 18:53:35 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:53:34 | 2023-04-24 18:53:35 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:53:35 | 2023-04-24 18:53:36 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:53:36 | 2023-04-24 18:53:36 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Apr-2023 14:53:36 | 2023-04-24 18:53:36 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:53:36 | 2023-04-24 18:53:36 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Apr-2023 14:53:36 | 2023-04-24 18:53:36 INFO calibrater::reset Reseting solve/apply state |
| 24-Apr-2023 14:53:36 | 2023-04-24 18:53:36 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Apr-2023 14:53:36 | 2023-04-24 18:53:36 INFO Calibrater::selectvis+ Selecting on time: '>04:38:23' |
| 24-Apr-2023 14:53:36 | 2023-04-24 18:53:36 INFO Calibrater::selectvis By selection 328860 rows are reduced to 313200 |
| 24-Apr-2023 14:53:36 | 2023-04-24 18:53:36 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 24-Apr-2023 14:53:36 | 2023-04-24 18:53:36 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Apr-2023 14:53:36 | 2023-04-24 18:53:36 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Apr-2023 14:53:36 | 2023-04-24 18:53:36 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Apr-2023 14:53:36 | 2023-04-24 18:53:36 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:53:36 | 2023-04-24 18:53:36 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Apr-2023 14:53:36 | 2023-04-24 18:53:36 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Apr-2023 14:53:36 | 2023-04-24 18:53:36 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:53:38 | 2023-04-24 18:53:39 INFO calibrater::correct Finished correcting. |
| 24-Apr-2023 14:53:39 | 2023-04-24 18:53:40 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Apr-2023 14:53:39 | test_tool_calibrater.py::calibrater_test::test_selectVisTime |
| 24-Apr-2023 14:53:39 | Check that time is properly selected by selectvis |
| 24-Apr-2023 14:53:39 | PASSED |
| 24-Apr-2023 14:53:39 | |
| 24-Apr-2023 14:53:39 | 2023-04-24 18:53:40 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Apr-2023 14:53:39 | 2023-04-24 18:53:40 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:53:39 | 2023-04-24 18:53:40 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:53:40 | 2023-04-24 18:53:40 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:53:41 | 2023-04-24 18:53:41 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:53:41 | 2023-04-24 18:53:42 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Apr-2023 14:53:41 | 2023-04-24 18:53:42 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:53:41 | 2023-04-24 18:53:42 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
| 24-Apr-2023 14:53:41 | 2023-04-24 18:53:42 INFO calibrater::reset Reseting solve/apply state |
| 24-Apr-2023 14:53:41 | 2023-04-24 18:53:42 INFO Calibrater::selectvis Performing selection on MeasurementSet |
| 24-Apr-2023 14:53:41 | 2023-04-24 18:53:42 INFO Calibrater::selectvis+ Selecting on uvrange: '> 500000lambda' |
| 24-Apr-2023 14:53:42 | 2023-04-24 18:53:42 INFO Calibrater::selectvis By selection 328860 rows are reduced to 103321 |
| 24-Apr-2023 14:53:42 | 2023-04-24 18:53:42 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
| 24-Apr-2023 14:53:42 | 2023-04-24 18:53:42 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
| 24-Apr-2023 14:53:42 | 2023-04-24 18:53:42 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Apr-2023 14:53:42 | 2023-04-24 18:53:42 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Apr-2023 14:53:42 | 2023-04-24 18:53:42 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:53:42 | 2023-04-24 18:53:42 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Apr-2023 14:53:42 | 2023-04-24 18:53:42 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Apr-2023 14:53:42 | 2023-04-24 18:53:42 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:53:44 | 2023-04-24 18:53:44 INFO calibrater::correct Finished correcting. |
| 24-Apr-2023 14:53:44 | 2023-04-24 18:53:45 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Apr-2023 14:53:44 | test_tool_calibrater.py::calibrater_test::test_selectVisUVrange |
| 24-Apr-2023 14:53:44 | Check that selectvis properly selects for uvrange |
| 24-Apr-2023 14:53:44 | PASSED |
| 24-Apr-2023 14:53:44 | |
| 24-Apr-2023 14:53:44 | 2023-04-24 18:53:45 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Apr-2023 14:53:44 | 2023-04-24 18:53:45 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:53:44 | 2023-04-24 18:53:45 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:53:45 | 2023-04-24 18:53:45 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:53:46 | 2023-04-24 18:53:46 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:53:46 | 2023-04-24 18:53:47 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Apr-2023 14:53:46 | 2023-04-24 18:53:47 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:53:46 | 2023-04-24 18:53:47 INFO calibrater::parsecallibfile Beginning parsecallibfile-)------- |
| 24-Apr-2023 14:53:46 | 2023-04-24 18:53:47 INFO calibrater::setcallib Beginning setcallib--------- |
| 24-Apr-2023 14:53:46 | 2023-04-24 18:53:47 INFO Calibrater::setcallib2(callib) Arranging to APPLY: |
| 24-Apr-2023 14:53:46 | 2023-04-24 18:53:47 INFO . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 24-Apr-2023 14:53:46 | 2023-04-24 18:53:47 INFO . 0: |
| 24-Apr-2023 14:53:46 | 2023-04-24 18:53:47 INFO + MS: obs= scan= fld= intent= spw= |
| 24-Apr-2023 14:53:46 | 2023-04-24 18:53:47 INFO + CT: tinterp=linear finterp= |
| 24-Apr-2023 14:53:46 | 2023-04-24 18:53:47 INFO + obsmap=[] scanmap=[] fldmap=[] |
| 24-Apr-2023 14:53:46 | 2023-04-24 18:53:47 INFO + spwmap=[] antmap=[] |
| 24-Apr-2023 14:53:46 | 2023-04-24 18:53:47 INFO calibrater::corrupt Beginning corrupt--------------------------- |
| 24-Apr-2023 14:53:46 | 2023-04-24 18:53:47 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Apr-2023 14:53:46 | 2023-04-24 18:53:47 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
| 24-Apr-2023 14:53:48 | 2023-04-24 18:53:49 INFO calibrater::corrupt Finished corrupting. |
| 24-Apr-2023 14:53:49 | 2023-04-24 18:53:50 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Apr-2023 14:53:49 | test_tool_calibrater.py::calibrater_test::test_setCalLib |
| 24-Apr-2023 14:53:49 | Check that a provided cal table can be used to corrupt the MODEL_DATA |
| 24-Apr-2023 14:53:49 | PASSED |
| 24-Apr-2023 14:53:49 | |
| 24-Apr-2023 14:53:49 | 2023-04-24 18:53:50 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Apr-2023 14:53:49 | 2023-04-24 18:53:50 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:53:49 | 2023-04-24 18:53:50 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:53:49 | 2023-04-24 18:53:50 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:53:51 | 2023-04-24 18:53:51 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:53:51 | 2023-04-24 18:53:52 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Apr-2023 14:53:51 | 2023-04-24 18:53:52 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:53:51 | 2023-04-24 18:53:52 INFO Calibrater::setCorrDepFlags Setting correlation dependent flags = True |
| 24-Apr-2023 14:53:51 | 2023-04-24 18:53:52 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Apr-2023 14:53:51 | test_tool_calibrater.py::calibrater_test::test_setCorrDepFlags |
| 24-Apr-2023 14:53:51 | Check that corrdepflags will be checked |
| 24-Apr-2023 14:53:51 | PASSED |
| 24-Apr-2023 14:53:51 | |
| 24-Apr-2023 14:53:52 | 2023-04-24 18:53:52 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Apr-2023 14:53:52 | 2023-04-24 18:53:52 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 24-Apr-2023 14:53:52 | 2023-04-24 18:53:52 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:53:52 | 2023-04-24 18:53:52 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:53:52 | 2023-04-24 18:53:53 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:53:52 | 2023-04-24 18:53:53 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 24-Apr-2023 14:53:52 | 2023-04-24 18:53:53 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:53:52 | 2023-04-24 18:53:53 INFO calibrater::smooth Beginning smooth--(MSSelection version)------- |
| 24-Apr-2023 14:53:52 | 2023-04-24 18:53:53 INFO Calibrater::smooth Beginning smoothing/interpolating method. |
| 24-Apr-2023 14:53:53 | 2023-04-24 18:53:53 WARN Found pre-v4.1 caltable (/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ngc5921.gcal); attempting to update... |
| 24-Apr-2023 14:53:53 | 2023-04-24 18:53:53 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
| 24-Apr-2023 14:53:53 | 2023-04-24 18:53:53 INFO Calibrater::smooth Storing result in testcalout.cal |
| 24-Apr-2023 14:53:53 | 2023-04-24 18:53:53 INFO Writing solutions to table: testcalout.cal |
| 24-Apr-2023 14:53:54 | 2023-04-24 18:53:55 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Apr-2023 14:53:55 | test_tool_calibrater.py::calibrater_test::test_smoothedCalTables |
| 24-Apr-2023 14:53:55 | Check that the smooth command creates a smoothed cal table |
| 24-Apr-2023 14:53:55 | PASSED |
| 24-Apr-2023 14:53:55 | |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:55 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:55 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:55 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:55 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:55 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO calibrater::setsolvebandpoly Beginning setsolvebandpoly--(MSSelection version)------- |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO Calibrater::setsolvebandpoly Arranging to SOLVE: |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO Calibrater::setsolvebandpoly . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO calibrater::solve Beginning solve----------------------------- |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO Calibrater::solve . (None) |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO Calibrater::solve . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO Calibrater::solve Solving for BPOLY |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO For solint = inf, found 7 solution intervals. |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.059507/0.0681762/0.0765806 |
| 24-Apr-2023 14:53:55 | 2023-04-24 18:53:56 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:56 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.336529/0.750193/1.6779 |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:56 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:56 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0630839/0.0689061/0.0756384 |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:56 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:56 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.279482/0.74979/1.59355 |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:56 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:56 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:57 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:57 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:57 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:57 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:57 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:57 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:57 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:57 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:57 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:57 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0672607/0.089081/0.111106 |
| 24-Apr-2023 14:53:56 | 2023-04-24 18:53:57 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:57 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.31075/3.32219/4.29305 |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:57 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:57 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0652822/0.0889198/0.116912 |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:57 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:57 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.44269/3.26616/4.3519 |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:57 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:57 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:58 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:58 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:58 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:58 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:58 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:58 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:58 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:58 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:58 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:58 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350681/0.587724/0.894558 |
| 24-Apr-2023 14:53:57 | 2023-04-24 18:53:58 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Apr-2023 14:54:00 | 2023-04-24 18:54:00 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.296/59.0077/111.454 |
| 24-Apr-2023 14:54:00 | 2023-04-24 18:54:00 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Apr-2023 14:54:00 | 2023-04-24 18:54:00 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.354236/0.581733/0.988903 |
| 24-Apr-2023 14:54:00 | 2023-04-24 18:54:00 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Apr-2023 14:54:02 | 2023-04-24 18:54:02 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 17.2419/56.3249/117.264 |
| 24-Apr-2023 14:54:02 | 2023-04-24 18:54:02 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 24-Apr-2023 14:54:02 | 2023-04-24 18:54:02 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 24-Apr-2023 14:54:02 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 24-Apr-2023 14:54:02 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 24-Apr-2023 14:54:02 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 24-Apr-2023 14:54:02 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 24-Apr-2023 14:54:02 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 24-Apr-2023 14:54:02 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 24-Apr-2023 14:54:02 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 24-Apr-2023 14:54:02 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 24-Apr-2023 14:54:02 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Apr-2023 14:54:02 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0850169/0.113968/0.15276 |
| 24-Apr-2023 14:54:02 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.67561/5.33243/8.17296 |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0784236/0.114345/0.159908 |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.46392/5.27232/7.20673 |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0703936/0.102501/0.131676 |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:03 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:04 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.98728/4.47977/5.84264 |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:04 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:04 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0751114/0.102994/0.138529 |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:04 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:04 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.18629/4.47068/5.8941 |
| 24-Apr-2023 14:54:03 | 2023-04-24 18:54:04 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 24-Apr-2023 14:54:04 | 2023-04-24 18:54:04 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 24-Apr-2023 14:54:04 | 2023-04-24 18:54:04 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 24-Apr-2023 14:54:04 | 2023-04-24 18:54:04 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 24-Apr-2023 14:54:04 | 2023-04-24 18:54:04 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 24-Apr-2023 14:54:04 | 2023-04-24 18:54:04 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 24-Apr-2023 14:54:04 | 2023-04-24 18:54:04 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 24-Apr-2023 14:54:04 | 2023-04-24 18:54:04 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 24-Apr-2023 14:54:04 | 2023-04-24 18:54:04 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 24-Apr-2023 14:54:04 | 2023-04-24 18:54:04 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 24-Apr-2023 14:54:04 | 2023-04-24 18:54:04 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Apr-2023 14:54:04 | 2023-04-24 18:54:04 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350626/0.604424/0.974388 |
| 24-Apr-2023 14:54:04 | 2023-04-24 18:54:04 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Apr-2023 14:54:06 | 2023-04-24 18:54:07 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.2542/59.3511/120.719 |
| 24-Apr-2023 14:54:06 | 2023-04-24 18:54:07 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Apr-2023 14:54:06 | 2023-04-24 18:54:07 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.382806/0.598119/0.941571 |
| 24-Apr-2023 14:54:06 | 2023-04-24 18:54:07 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:09 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 20.0637/57.2112/118.101 |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:09 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:09 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:09 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:09 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:09 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:09 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:09 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:09 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:09 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:09 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:09 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:09 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0750931/0.0978998/0.125897 |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:09 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:10 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.72932/3.98787/5.33715 |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:10 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:10 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0658572/0.0972125/0.140794 |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:10 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:10 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.97943/3.97841/5.72903 |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:10 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 24-Apr-2023 14:54:09 | 2023-04-24 18:54:10 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:10 INFO Calibrater::solve Found good BPOLY solutions in 7 slots. |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:10 INFO calibrater::solve Finished solving. |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:10 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 24-Apr-2023 14:54:10 | test_tool_calibrater.py::calibrater_test::test_solveBandpass |
| 24-Apr-2023 14:54:10 | Check that solve band poly creates the output table |
| 24-Apr-2023 14:54:10 | PASSED |
| 24-Apr-2023 14:54:10 | |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO calibrater::setsolvegainspline Beginning setsolvegainspline--(MSSelection version)------- |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO Calibrater::setsolvegainspline Arranging to SOLVE: |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO Calibrater::setsolvegainspline . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO calibrater::solve Beginning solve----------------------------- |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO Calibrater::solve . (None) |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO Calibrater::solve . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO GJonesSpline::solve() Fitting time-dependent cubic splines. |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO GJonesSpline::solve() Solving for phase splines with splinetime= 10800 |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO GJonesSpline::solve() Solving for amplitude splines with splinetime= 10800 |
| 24-Apr-2023 14:54:10 | 2023-04-24 18:54:11 INFO GJonesSpline::solve() Accumulating data for: field= 1331+30500002_0, spw= 0, nchan= 63 |
| 24-Apr-2023 14:54:11 | 2023-04-24 18:54:11 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63 |
| 24-Apr-2023 14:54:11 | 2023-04-24 18:54:11 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63 |
| 24-Apr-2023 14:54:11 | 2023-04-24 18:54:11 INFO GJonesSpline::solve() Number of timestamps in data = 60 |
| 24-Apr-2023 14:54:11 | 2023-04-24 18:54:11 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec. |
| 24-Apr-2023 14:54:11 | 2023-04-24 18:54:11 INFO GJonesSpline::solve() Number of cubic spline control points = 4 |
| 24-Apr-2023 14:54:11 | 2023-04-24 18:54:11 INFO GJonesSpline::solve() Number of cubic spline knots = 8 |
| 24-Apr-2023 14:54:11 | 2023-04-24 18:54:11 INFO GJonesSpline::solve() Number of cubic spline segments = 1 |
| 24-Apr-2023 14:54:11 | 2023-04-24 18:54:11 INFO GJonesSpline::solve() Fitting amplitude spline. |
| 24-Apr-2023 14:54:11 | test_tool_calibrater.py::calibrater_test::test_solveGainspline DPBTRF ;problem leading minor 23 |
| 24-Apr-2023 14:54:11 | DPBTRF ;problem leading minor 23 |
| 24-Apr-2023 14:54:11 | 2023-04-24 18:54:11 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline. |
| 24-Apr-2023 14:54:11 | 2023-04-24 18:54:11 INFO GJonesSpline::solve() Fitting phase spline. |
| 24-Apr-2023 14:54:11 | DPBTRF ;problem leading minor 22 |
| 24-Apr-2023 14:54:11 | DPBTRF ;problem leading minor 22 |
| 24-Apr-2023 14:54:11 | 2023-04-24 18:54:11 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline |
| 24-Apr-2023 14:54:11 | 2023-04-24 18:54:11 INFO calibrater::solve Finished solving. |
| 24-Apr-2023 14:54:11 | 2023-04-24 18:54:12 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 24-Apr-2023 14:54:11 | |
| 24-Apr-2023 14:54:11 | Check that solve gain spline creates the output table |
| 24-Apr-2023 14:54:11 | PASSED |
| 24-Apr-2023 14:54:11 | |
| 24-Apr-2023 14:54:11 | 2023-04-24 18:54:12 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Apr-2023 14:54:11 | 2023-04-24 18:54:12 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:54:11 | 2023-04-24 18:54:12 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:54:12 | 2023-04-24 18:54:12 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:54:13 | 2023-04-24 18:54:13 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:54:13 | 2023-04-24 18:54:14 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Apr-2023 14:54:13 | 2023-04-24 18:54:14 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:54:13 | 2023-04-24 18:54:14 INFO calibrater::specifycal Beginning specifycal----------------------- |
| 24-Apr-2023 14:54:13 | 2023-04-24 18:54:14 INFO Creating G Jones table from specified parameters. |
| 24-Apr-2023 14:54:13 | 2023-04-24 18:54:14 INFO Generating 'G' corrections. |
| 24-Apr-2023 14:54:13 | 2023-04-24 18:54:14 INFO Specified parameter(s) (per spw and pol) repeated on all antennas. |
| 24-Apr-2023 14:54:13 | 2023-04-24 18:54:14 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations. |
| 24-Apr-2023 14:54:13 | 2023-04-24 18:54:14 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9]) |
| 24-Apr-2023 14:54:13 | 2023-04-24 18:54:14 INFO Writing solutions to table: testcalout.cal |
| 24-Apr-2023 14:54:15 | 2023-04-24 18:54:15 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Apr-2023 14:54:15 | test_tool_calibrater.py::calibrater_test::test_specifyCal |
| 24-Apr-2023 14:54:15 | Check that specifycal can set values for specific spws and antennas |
| 24-Apr-2023 14:54:15 | PASSED |
| 24-Apr-2023 14:54:15 | |
| 24-Apr-2023 14:54:15 | 2023-04-24 18:54:16 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 24-Apr-2023 14:54:15 | 2023-04-24 18:54:16 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 24-Apr-2023 14:54:15 | 2023-04-24 18:54:16 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:54:15 | 2023-04-24 18:54:16 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:54:15 | 2023-04-24 18:54:16 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:17 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO Calibrater::setsolve Arranging to SOLVE: |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO Calibrater::state The following calibration terms are arranged for apply: |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO Calibrater::state The following calibration term is arranged for solve: |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO calibrater::solve Beginning solve----------------------------- |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 24-Apr-2023 14:54:17 | 2023-04-24 18:54:18 INFO Solving for Mf Mueller |
| 24-Apr-2023 14:54:18 | 2023-04-24 18:54:18 INFO For solint = inf, found 84 solution intervals. |
| 24-Apr-2023 14:54:19 | 2023-04-24 18:54:20 INFO Found good Mf Mueller solutions in 84 intervals. |
| 24-Apr-2023 14:54:19 | 2023-04-24 18:54:20 INFO Writing solutions to table: output.ms |
| 24-Apr-2023 14:54:20 | 2023-04-24 18:54:20 INFO calibrater::solve Finished solving. |
| 24-Apr-2023 14:54:20 | 2023-04-24 18:54:21 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 24-Apr-2023 14:54:20 | test_tool_calibrater.py::calibrater_test::test_standardPath |
| 24-Apr-2023 14:54:20 | open setapply setsolve state solve close |
| 24-Apr-2023 14:54:20 | PASSED |
| 24-Apr-2023 14:54:20 | |
| 24-Apr-2023 14:54:20 | 2023-04-24 18:54:21 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Apr-2023 14:54:20 | 2023-04-24 18:54:21 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:54:20 | 2023-04-24 18:54:21 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:54:21 | 2023-04-24 18:54:21 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:22 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO name:: No table opened. |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: The Table Cache has the following 16 entries: |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO name:: No table opened. |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 INFO showcache:: The Table Cache is empty. |
| 24-Apr-2023 14:54:22 | 2023-04-24 18:54:23 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Apr-2023 14:54:22 | test_tool_calibrater.py::calibrater_test::test_takesMs |
| 24-Apr-2023 14:54:22 | Check that the calibrater tool can open and close an MS |
| 24-Apr-2023 14:54:22 | PASSED |
| 24-Apr-2023 14:54:22 | |
| 24-Apr-2023 14:54:23 | 2023-04-24 18:54:23 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 24-Apr-2023 14:54:23 | 2023-04-24 18:54:23 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 24-Apr-2023 14:54:23 | 2023-04-24 18:54:23 INFO Clearing all model records in MS header. |
| 24-Apr-2023 14:54:23 | 2023-04-24 18:54:23 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 24-Apr-2023 14:54:24 | 2023-04-24 18:54:25 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 24-Apr-2023 14:54:24 | 2023-04-24 18:54:25 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 24-Apr-2023 14:54:24 | 2023-04-24 18:54:25 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 24-Apr-2023 14:54:24 | 2023-04-24 18:54:25 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 24-Apr-2023 14:54:24 | 2023-04-24 18:54:25 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 24-Apr-2023 14:54:24 | 2023-04-24 18:54:25 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:54:24 | 2023-04-24 18:54:25 INFO calibrater::correct Beginning correct--------------------------- |
| 24-Apr-2023 14:54:24 | 2023-04-24 18:54:25 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 24-Apr-2023 14:54:24 | 2023-04-24 18:54:25 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 24-Apr-2023 14:54:27 | 2023-04-24 18:54:27 INFO calibrater::correct Finished correcting. |
| 24-Apr-2023 14:54:27 | 2023-04-24 18:54:27 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 24-Apr-2023 14:54:27 | test_tool_calibrater.py::calibrater_test::test_writeToCorrected |
| 24-Apr-2023 14:54:27 | Check that the tool writes to the CORRECTED_DATA column |
| 24-Apr-2023 14:54:27 | PASSED |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml - |
| 24-Apr-2023 14:54:27 | ================== 24 passed, 1 warning in 115.41s (0:01:55) =================== |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calanalysis/ |
| 24-Apr-2023 14:54:27 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calanalysis |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calanalysis/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calanalysis/ |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 24-Apr-2023 14:54:27 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msmetadata/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_msmetadata/ |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_subimage/ |
| 24-Apr-2023 14:54:27 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_subimage |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_subimage/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_subimage/ |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_table/ |
| 24-Apr-2023 14:54:27 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_table |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_table/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_table/ |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms/ |
| 24-Apr-2023 14:54:27 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms/ |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 24-Apr-2023 14:54:27 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_rebin/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 24-Apr-2023 14:54:27 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pv/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv/ |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 24-Apr-2023 14:54:27 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_regrid/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse/ |
| 24-Apr-2023 14:54:27 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_collapse/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse/ |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 24-Apr-2023 14:54:27 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_sdm/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys/ |
| 24-Apr-2023 14:54:27 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_coordsys/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_coordsys/ |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
| 24-Apr-2023 14:54:27 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_deviation/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_deviation/ |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
| 24-Apr-2023 14:54:27 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_agentflagger/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
| 24-Apr-2023 14:54:27 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pbcor/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 24-Apr-2023 14:54:27 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_statwt/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 24-Apr-2023 14:54:27 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater |
| 24-Apr-2023 14:54:27 | |
| 24-Apr-2023 14:54:27 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 24-Apr-2023 14:54:30 | total 167988 |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci 15001 98422 Apr 24 18:26 casatestutils-6.5.6.5a14123.dev1-py3-none-any.whl |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci 15001 171756327 Apr 24 18:26 casatools-6.5.6.5a14123.dev1-cp38-cp38-manylinux_2_28_x86_64.whl |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 4314 Apr 24 18:54 test_tool_agentflagger.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 980 Apr 24 18:54 test_tool_calanalysis.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 2632 Apr 24 18:54 test_tool_calibrater.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 545 Apr 24 18:54 test_tool_componentlist.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 7441 Apr 24 18:54 test_tool_coordsys.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 12599 Apr 24 18:54 test_tool_image.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 2195 Apr 24 18:54 test_tool_image_collapse.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 1022 Apr 24 18:54 test_tool_image_deviation.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 2550 Apr 24 18:54 test_tool_image_fitprofile.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 1153 Apr 24 18:54 test_tool_image_pbcor.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 858 Apr 24 18:54 test_tool_image_pv.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 980 Apr 24 18:54 test_tool_image_rebin.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 1311 Apr 24 18:54 test_tool_image_regrid.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 1507 Apr 24 18:54 test_tool_image_statistics.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 739 Apr 24 18:54 test_tool_image_subimage.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 864 Apr 24 18:54 test_tool_image_transpose.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 1940 Apr 24 18:54 test_tool_imagepol.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 813 Apr 24 18:54 test_tool_linearmosaic.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 642 Apr 24 18:54 test_tool_logsink.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 523 Apr 24 18:54 test_tool_measures.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 5198 Apr 24 18:54 test_tool_ms.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 341 Apr 24 18:54 test_tool_ms_createmultims.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 2069 Apr 24 18:54 test_tool_ms_statwt.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 8486 Apr 24 18:54 test_tool_msmetadata.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 1145 Apr 24 18:54 test_tool_quanta.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 3951 Apr 24 18:54 test_tool_regionmanager.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 2047 Apr 24 18:54 test_tool_sdm.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 2077 Apr 24 18:54 test_tool_sdm_toms.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 422 Apr 24 18:54 test_tool_simulator.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 1055 Apr 24 18:54 test_tool_table.xml |
| 24-Apr-2023 14:54:30 | -rw-r--r-- 1 casaci root 1693 Apr 24 18:54 test_tool_vpmanager.xml |
| 24-Apr-2023 14:54:30 | Finished task 'Test wheel' with result: Success |
| 24-Apr-2023 14:54:30 | Starting task 'Tar work directory' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
| 24-Apr-2023 14:54:30 | Beginning to execute external process for build 'CASA - CMake Dev Test - CAS-14123 - Test Tools Many Linux 2.28 #1 (CASA-CMDT7-TTOMLPY38-1)' ... running command line: /export/home/cbt-el7-9/bamboohome/temp/CASA-CMDT7-TTOMLPY38-1-ScriptBuildTask-3342772725671041991.sh ... in: /export/home/cbt-el7-9/bamboohome/xml-data/build-dir/CASA-CMDT7-TTOMLPY38 |
| 24-Apr-2023 14:54:30 | Package working directory |
| 24-Apr-2023 14:54:30 | tar: work: Cannot stat: No such file or directory |
| 24-Apr-2023 14:54:30 | tar: Exiting with failure status due to previous errors |
| 24-Apr-2023 14:54:31 | total 167992 |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci 15001 98422 Apr 24 18:26 casatestutils-6.5.6.5a14123.dev1-py3-none-any.whl |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci 15001 171756327 Apr 24 18:26 casatools-6.5.6.5a14123.dev1-cp38-cp38-manylinux_2_28_x86_64.whl |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 4314 Apr 24 18:54 test_tool_agentflagger.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 980 Apr 24 18:54 test_tool_calanalysis.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 2632 Apr 24 18:54 test_tool_calibrater.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 545 Apr 24 18:54 test_tool_componentlist.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 7441 Apr 24 18:54 test_tool_coordsys.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 12599 Apr 24 18:54 test_tool_image.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 2195 Apr 24 18:54 test_tool_image_collapse.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 1022 Apr 24 18:54 test_tool_image_deviation.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 2550 Apr 24 18:54 test_tool_image_fitprofile.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 1153 Apr 24 18:54 test_tool_image_pbcor.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 858 Apr 24 18:54 test_tool_image_pv.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 980 Apr 24 18:54 test_tool_image_rebin.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 1311 Apr 24 18:54 test_tool_image_regrid.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 1507 Apr 24 18:54 test_tool_image_statistics.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 739 Apr 24 18:54 test_tool_image_subimage.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 864 Apr 24 18:54 test_tool_image_transpose.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 1940 Apr 24 18:54 test_tool_imagepol.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 813 Apr 24 18:54 test_tool_linearmosaic.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 642 Apr 24 18:54 test_tool_logsink.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 523 Apr 24 18:54 test_tool_measures.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 5198 Apr 24 18:54 test_tool_ms.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 341 Apr 24 18:54 test_tool_ms_createmultims.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 2069 Apr 24 18:54 test_tool_ms_statwt.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 8486 Apr 24 18:54 test_tool_msmetadata.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 1145 Apr 24 18:54 test_tool_quanta.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 3951 Apr 24 18:54 test_tool_regionmanager.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 2047 Apr 24 18:54 test_tool_sdm.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 2077 Apr 24 18:54 test_tool_sdm_toms.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 422 Apr 24 18:54 test_tool_simulator.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 1055 Apr 24 18:54 test_tool_table.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 1693 Apr 24 18:54 test_tool_vpmanager.xml |
| 24-Apr-2023 14:54:31 | -rw-r--r-- 1 casaci root 45 Apr 24 18:54 work-el7-3.8.tar.gz |
| 24-Apr-2023 14:54:31 | Done packaging working directory |
| 24-Apr-2023 14:54:31 | Finished task 'Tar work directory' with result: Success |
| 24-Apr-2023 14:54:31 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
| 24-Apr-2023 14:54:31 | Parsing test results under /export/home/cbt-el7-9/bamboohome/xml-data/build-dir/CASA-CMDT7-TTOMLPY38... |
| 24-Apr-2023 14:54:31 | Finished task 'Parse tests' with result: Success |
| 24-Apr-2023 14:54:31 | Substituting variable: ${bamboo.repository.branch.name} with CAS-14123 |
| 24-Apr-2023 14:54:31 | Starting task 'Upload wheel' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
| 24-Apr-2023 14:54:31 | Beginning to execute external process for build 'CASA - CMake Dev Test - CAS-14123 - Test Tools Many Linux 2.28 #1 (CASA-CMDT7-TTOMLPY38-1)' ... running command line: /export/home/cbt-el7-9/bamboohome/temp/CASA-CMDT7-TTOMLPY38-1-ScriptBuildTask-377384738612249520.sh ... in: /export/home/cbt-el7-9/bamboohome/xml-data/build-dir/CASA-CMDT7-TTOMLPY38 |
| 24-Apr-2023 14:54:32 | Collecting twine |
| 24-Apr-2023 14:54:32 | Downloading twine-4.0.2-py3-none-any.whl (36 kB) |
| 24-Apr-2023 14:54:32 | Collecting requests-toolbelt!=0.9.0,>=0.8.0 |
| 24-Apr-2023 14:54:32 | Downloading requests_toolbelt-0.10.1-py2.py3-none-any.whl (54 kB) |
| 24-Apr-2023 14:54:32 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.5/54.5 KB 743.3 kB/s eta 0:00:00 |
| 24-Apr-2023 14:54:32 | Collecting readme-renderer>=35.0 |
| 24-Apr-2023 14:54:32 | Downloading readme_renderer-37.3-py3-none-any.whl (14 kB) |
| 24-Apr-2023 14:54:32 | Collecting urllib3>=1.26.0 |
| 24-Apr-2023 14:54:32 | Downloading urllib3-1.26.15-py2.py3-none-any.whl (140 kB) |
| 24-Apr-2023 14:54:32 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 140.9/140.9 KB 1.3 MB/s eta 0:00:00 |
| 24-Apr-2023 14:54:33 | Collecting requests>=2.20 |
| 24-Apr-2023 14:54:33 | Downloading requests-2.28.2-py3-none-any.whl (62 kB) |
| 24-Apr-2023 14:54:33 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 62.8/62.8 KB 699.4 kB/s eta 0:00:00 |
| 24-Apr-2023 14:54:33 | Collecting keyring>=15.1 |
| 24-Apr-2023 14:54:33 | Downloading keyring-23.13.1-py3-none-any.whl (37 kB) |
| 24-Apr-2023 14:54:33 | Collecting rfc3986>=1.4.0 |
| 24-Apr-2023 14:54:33 | Downloading rfc3986-2.0.0-py2.py3-none-any.whl (31 kB) |
| 24-Apr-2023 14:54:33 | Collecting pkginfo>=1.8.1 |
| 24-Apr-2023 14:54:33 | Downloading pkginfo-1.9.6-py3-none-any.whl (30 kB) |
| 24-Apr-2023 14:54:33 | Collecting rich>=12.0.0 |
| 24-Apr-2023 14:54:33 | Downloading rich-13.3.4-py3-none-any.whl (238 kB) |
| 24-Apr-2023 14:54:34 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 238.7/238.7 KB 3.1 MB/s eta 0:00:00 |
| 24-Apr-2023 14:54:34 | Collecting importlib-metadata>=3.6 |
| 24-Apr-2023 14:54:34 | Downloading importlib_metadata-6.6.0-py3-none-any.whl (22 kB) |
| 24-Apr-2023 14:54:34 | Collecting zipp>=0.5 |
| 24-Apr-2023 14:54:34 | Downloading zipp-3.15.0-py3-none-any.whl (6.8 kB) |
| 24-Apr-2023 14:54:34 | Collecting jeepney>=0.4.2 |
| 24-Apr-2023 14:54:34 | Downloading jeepney-0.8.0-py3-none-any.whl (48 kB) |
| 24-Apr-2023 14:54:34 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 48.4/48.4 KB 1.7 MB/s eta 0:00:00 |
| 24-Apr-2023 14:54:34 | Collecting SecretStorage>=3.2 |
| 24-Apr-2023 14:54:34 | Downloading SecretStorage-3.3.3-py3-none-any.whl (15 kB) |
| 24-Apr-2023 14:54:34 | Collecting jaraco.classes |
| 24-Apr-2023 14:54:34 | Downloading jaraco.classes-3.2.3-py3-none-any.whl (6.0 kB) |
| 24-Apr-2023 14:54:35 | Collecting Pygments>=2.5.1 |
| 24-Apr-2023 14:54:35 | Downloading Pygments-2.15.1-py3-none-any.whl (1.1 MB) |
| 24-Apr-2023 14:54:35 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 10.7 MB/s eta 0:00:00 |
| 24-Apr-2023 14:54:35 | Collecting docutils>=0.13.1 |
| 24-Apr-2023 14:54:35 | Downloading docutils-0.19-py3-none-any.whl (570 kB) |
| 24-Apr-2023 14:54:35 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 570.5/570.5 KB 8.1 MB/s eta 0:00:00 |
| 24-Apr-2023 14:54:35 | Collecting bleach>=2.1.0 |
| 24-Apr-2023 14:54:35 | Downloading bleach-6.0.0-py3-none-any.whl (162 kB) |
| 24-Apr-2023 14:54:35 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 162.5/162.5 KB 6.1 MB/s eta 0:00:00 |
| 24-Apr-2023 14:54:35 | Collecting charset-normalizer<4,>=2 |
| 24-Apr-2023 14:54:35 | Downloading charset_normalizer-3.1.0-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (199 kB) |
| 24-Apr-2023 14:54:35 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 199.3/199.3 KB 3.9 MB/s eta 0:00:00 |
| 24-Apr-2023 14:54:35 | Collecting certifi>=2017.4.17 |
| 24-Apr-2023 14:54:35 | Downloading certifi-2022.12.7-py3-none-any.whl (155 kB) |
| 24-Apr-2023 14:54:35 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 155.3/155.3 KB 1.5 MB/s eta 0:00:00 |
| 24-Apr-2023 14:54:36 | Collecting idna<4,>=2.5 |
| 24-Apr-2023 14:54:36 | Downloading idna-3.4-py3-none-any.whl (61 kB) |
| 24-Apr-2023 14:54:36 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.5/61.5 KB 1.5 MB/s eta 0:00:00 |
| 24-Apr-2023 14:54:36 | Collecting markdown-it-py<3.0.0,>=2.2.0 |
| 24-Apr-2023 14:54:36 | Downloading markdown_it_py-2.2.0-py3-none-any.whl (84 kB) |
| 24-Apr-2023 14:54:36 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 84.5/84.5 KB 2.9 MB/s eta 0:00:00 |
| 24-Apr-2023 14:54:36 | Collecting six>=1.9.0 |
| 24-Apr-2023 14:54:36 | Downloading six-1.16.0-py2.py3-none-any.whl (11 kB) |
| 24-Apr-2023 14:54:36 | Collecting webencodings |
| 24-Apr-2023 14:54:36 | Downloading webencodings-0.5.1-py2.py3-none-any.whl (11 kB) |
| 24-Apr-2023 14:54:36 | Collecting mdurl~=0.1 |
| 24-Apr-2023 14:54:36 | Downloading mdurl-0.1.2-py3-none-any.whl (10.0 kB) |
| 24-Apr-2023 14:54:37 | Collecting cryptography>=2.0 |
| 24-Apr-2023 14:54:37 | Downloading cryptography-40.0.2-cp36-abi3-manylinux_2_28_x86_64.whl (3.7 MB) |
| 24-Apr-2023 14:54:37 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.7/3.7 MB 12.8 MB/s eta 0:00:00 |
| 24-Apr-2023 14:54:37 | Collecting more-itertools |
| 24-Apr-2023 14:54:38 | Downloading more_itertools-9.1.0-py3-none-any.whl (54 kB) |
| 24-Apr-2023 14:54:38 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.2/54.2 KB 3.0 MB/s eta 0:00:00 |
| 24-Apr-2023 14:54:38 | Collecting cffi>=1.12 |
| 24-Apr-2023 14:54:38 | Downloading cffi-1.15.1-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (441 kB) |
| 24-Apr-2023 14:54:38 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 441.8/441.8 KB 6.2 MB/s eta 0:00:00 |
| 24-Apr-2023 14:54:38 | Collecting pycparser |
| 24-Apr-2023 14:54:38 | Downloading pycparser-2.21-py2.py3-none-any.whl (118 kB) |
| 24-Apr-2023 14:54:38 | ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 118.7/118.7 KB 4.8 MB/s eta 0:00:00 |
| 24-Apr-2023 14:54:38 | Installing collected packages: webencodings, zipp, urllib3, six, rfc3986, Pygments, pycparser, pkginfo, more-itertools, mdurl, jeepney, idna, docutils, charset-normalizer, certifi, requests, markdown-it-py, jaraco.classes, importlib-metadata, cffi, bleach, rich, requests-toolbelt, readme-renderer, cryptography, SecretStorage, keyring, twine |
| 24-Apr-2023 14:54:45 | Successfully installed Pygments-2.15.1 SecretStorage-3.3.3 bleach-6.0.0 certifi-2022.12.7 cffi-1.15.1 charset-normalizer-3.1.0 cryptography-40.0.2 docutils-0.19 idna-3.4 importlib-metadata-6.6.0 jaraco.classes-3.2.3 jeepney-0.8.0 keyring-23.13.1 markdown-it-py-2.2.0 mdurl-0.1.2 more-itertools-9.1.0 pkginfo-1.9.6 pycparser-2.21 readme-renderer-37.3 requests-2.28.2 requests-toolbelt-0.10.1 rfc3986-2.0.0 rich-13.3.4 six-1.16.0 twine-4.0.2 urllib3-1.26.15 webencodings-0.5.1 zipp-3.15.0 |
| 24-Apr-2023 14:54:45 | WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv |
| 24-Apr-2023 14:54:45 | WARNING: You are using pip version 22.0.4; however, version 23.1.1 is available. |
| 24-Apr-2023 14:54:45 | You should consider upgrading via the '/usr/local/bin/python3.10 -m pip install --upgrade pip' command. |
| 24-Apr-2023 14:54:45 | Cloning into 'casa-build-utils'... |
| 24-Apr-2023 14:54:46 | Uploading distributions to |
| 24-Apr-2023 14:54:46 | https://casa-pip.nrao.edu:443/repository/casa-dev-wheel/ |
| 24-Apr-2023 14:54:48 | Uploading casatools-6.5.6.5a14123.dev1-cp38-cp38-manylinux_2_28_x86_64.whl |
| 24-Apr-2023 14:54:48 | |
| 24-Apr-2023 14:54:48 | 0% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 0.0/171.8 MB • --:-- • ? |
| 24-Apr-2023 14:54:48 | 1% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/171.8 MB • 00:10 • 17.6 MB/s |
| 24-Apr-2023 14:54:48 | 2% ╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.9/171.8 MB • 00:11 • 16.9 MB/s |
| 24-Apr-2023 14:54:48 | 3% ━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.6/171.8 MB • 00:10 • 16.9 MB/s |
| 24-Apr-2023 14:54:48 | 4% ━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 6.4/171.8 MB • 00:10 • 17.0 MB/s |
| 24-Apr-2023 14:54:48 | 5% ━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 8.2/171.8 MB • 00:10 • 17.1 MB/s |
| 24-Apr-2023 14:54:48 | 6% ━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 11.0/171.8 MB • 00:09 • 19.8 MB/s |
| 24-Apr-2023 14:54:48 | 8% ━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 14.4/171.8 MB • 00:07 • 25.5 MB/s |
| 24-Apr-2023 14:54:49 | 10% ━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 16.9/171.8 MB • 00:06 • 28.8 MB/s |
| 24-Apr-2023 14:54:49 | 11% ━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 18.8/171.8 MB • 00:07 • 25.2 MB/s |
| 24-Apr-2023 14:54:49 | 12% ━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 20.6/171.8 MB • 00:07 • 22.0 MB/s |
| 24-Apr-2023 14:54:49 | 13% ━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 22.3/171.8 MB • 00:08 • 19.3 MB/s |
| 24-Apr-2023 14:54:49 | 14% ━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 24.7/171.8 MB • 00:08 • 18.7 MB/s |
| 24-Apr-2023 14:54:49 | 17% ━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 28.4/171.8 MB • 00:06 • 24.3 MB/s |
| 24-Apr-2023 14:54:49 | 19% ━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 32.4/171.8 MB • 00:04 • 35.6 MB/s |
| 24-Apr-2023 14:54:49 | 21% ━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 36.8/171.8 MB • 00:04 • 40.2 MB/s |
| 24-Apr-2023 14:54:49 | 24% ━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 40.8/171.8 MB • 00:04 • 40.3 MB/s |
| 24-Apr-2023 14:54:50 | 26% ━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 45.1/171.8 MB • 00:04 • 40.2 MB/s |
| 24-Apr-2023 14:54:50 | 29% ━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 49.3/171.8 MB • 00:03 • 41.0 MB/s |
| 24-Apr-2023 14:54:50 | 31% ━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━━ 53.4/171.8 MB • 00:03 • 40.1 MB/s |
| 24-Apr-2023 14:54:50 | 34% ━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━ 57.7/171.8 MB • 00:03 • 41.2 MB/s |
| 24-Apr-2023 14:54:50 | 36% ━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━ 61.5/171.8 MB • 00:03 • 38.5 MB/s |
| 24-Apr-2023 14:54:50 | 38% ━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━ 65.2/171.8 MB • 00:03 • 36.0 MB/s |
| 24-Apr-2023 14:54:50 | 40% ━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━━ 68.5/171.8 MB • 00:04 • 34.1 MB/s |
| 24-Apr-2023 14:54:50 | 42% ━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━━ 72.2/171.8 MB • 00:03 • 33.3 MB/s |
| 24-Apr-2023 14:54:50 | 43% ━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━━━ 74.1/171.8 MB • 00:03 • 33.0 MB/s |
| 24-Apr-2023 14:54:50 | 44% ━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━━ 76.0/171.8 MB • 00:04 • 24.1 MB/s |
| 24-Apr-2023 14:54:51 | 46% ━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━━ 79.6/171.8 MB • 00:04 • 23.8 MB/s |
| 24-Apr-2023 14:54:51 | 48% ━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━━ 83.1/171.8 MB • 00:03 • 31.8 MB/s |
| 24-Apr-2023 14:54:51 | 50% ━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━━ 85.7/171.8 MB • 00:03 • 30.2 MB/s |
| 24-Apr-2023 14:54:51 | 51% ━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━━ 87.5/171.8 MB • 00:04 • 25.5 MB/s |
| 24-Apr-2023 14:54:51 | 52% ━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━━ 89.5/171.8 MB • 00:04 • 22.2 MB/s |
| 24-Apr-2023 14:54:51 | 53% ━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━━━ 91.8/171.8 MB • 00:04 • 20.3 MB/s |
| 24-Apr-2023 14:54:51 | 55% ━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━━ 93.9/171.8 MB • 00:04 • 19.6 MB/s |
| 24-Apr-2023 14:54:51 | 56% ━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━━━━ 96.9/171.8 MB • 00:04 • 22.4 MB/s |
| 24-Apr-2023 14:54:51 | 59% ━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━━ 100.5/171.8 MB • 00:03 • 28.4 MB/s |
| 24-Apr-2023 14:54:52 | 61% ━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━ 104.0/171.8 MB • 00:03 • 33.4 MB/s |
| 24-Apr-2023 14:54:52 | 63% ━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━ 107.6/171.8 MB • 00:02 • 33.7 MB/s |
| 24-Apr-2023 14:54:52 | 65% ━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━━ 111.3/171.8 MB • 00:02 • 34.5 MB/s |
| 24-Apr-2023 14:54:52 | 67% ━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━━ 115.2/171.8 MB • 00:02 • 35.3 MB/s |
| 24-Apr-2023 14:54:52 | 70% ━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━━ 119.7/171.8 MB • 00:02 • 42.0 MB/s |
| 24-Apr-2023 14:54:52 | 72% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━━ 123.1/171.8 MB • 00:02 • 37.8 MB/s |
| 24-Apr-2023 14:54:52 | 74% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━━ 126.7/171.8 MB • 00:02 • 34.2 MB/s |
| 24-Apr-2023 14:54:52 | 75% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━ 129.6/171.8 MB • 00:02 • 32.2 MB/s |
| 24-Apr-2023 14:54:52 | 77% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━━ 132.2/171.8 MB • 00:02 • 28.7 MB/s |
| 24-Apr-2023 14:54:52 | 79% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━━ 136.0/171.8 MB • 00:02 • 28.9 MB/s |
| 24-Apr-2023 14:54:53 | 82% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━━ 140.1/171.8 MB • 00:01 • 37.0 MB/s |
| 24-Apr-2023 14:54:53 | 84% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━━ 144.2/171.8 MB • 00:01 • 40.9 MB/s |
| 24-Apr-2023 14:54:53 | 86% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━ 147.9/171.8 MB • 00:01 • 37.9 MB/s |
| 24-Apr-2023 14:54:53 | 87% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━━━━━ 149.4/171.8 MB • 00:01 • 29.5 MB/s |
| 24-Apr-2023 14:54:53 | 88% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━ 151.7/171.8 MB • 00:01 • 24.1 MB/s |
| 24-Apr-2023 14:54:53 | 90% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━━ 155.1/171.8 MB • 00:01 • 23.4 MB/s |
| 24-Apr-2023 14:54:53 | 93% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━━ 159.2/171.8 MB • 00:01 • 31.7 MB/s |
| 24-Apr-2023 14:54:53 | 95% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━ 163.5/171.8 MB • 00:01 • 43.4 MB/s |
| 24-Apr-2023 14:54:53 | 96% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╺━ 164.2/171.8 MB • 00:01 • 28.3 MB/s |
| 24-Apr-2023 14:54:54 | 97% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸━ 167.0/171.8 MB • 00:01 • 25.0 MB/s |
| 24-Apr-2023 14:54:54 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸ 171.5/171.8 MB • 00:01 • 24.6 MB/s |
| 24-Apr-2023 14:54:54 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 171.8/171.8 MB • 00:05 • 29.6 MB/s |
| 24-Apr-2023 14:54:54 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 171.8/171.8 MB • 00:05 • 29.6 MB/s |
| 24-Apr-2023 14:54:54 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 171.8/171.8 MB • 00:05 • 29.6 MB/s |
| 24-Apr-2023 14:54:54 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 171.8/171.8 MB • 00:05 • 29.6 MB/s |
| 24-Apr-2023 14:54:55 | Uploading distributions to |
| 24-Apr-2023 14:54:55 | https://casa-pip.nrao.edu:443/repository/casa-dev-wheel/ |
| 24-Apr-2023 14:54:55 | Uploading casatestutils-6.5.6.5a14123.dev1-py3-none-any.whl |
| 24-Apr-2023 14:54:55 | |
| 24-Apr-2023 14:54:55 | 0% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 0.0/109.5 kB • --:-- • ? |
| 24-Apr-2023 14:54:55 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 109.5/109.5 kB • 00:00 • 5.9 MB/s |
| 24-Apr-2023 14:54:55 | 100% ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 109.5/109.5 kB • 00:00 • 5.9 MB/s |
| 24-Apr-2023 14:54:55 | |
| 24-Apr-2023 14:54:55 | Finished task 'Upload wheel' with result: Success |
| 24-Apr-2023 14:54:55 | Starting task 'Cleanup' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
| 24-Apr-2023 14:54:55 | Beginning to execute external process for build 'CASA - CMake Dev Test - CAS-14123 - Test Tools Many Linux 2.28 #1 (CASA-CMDT7-TTOMLPY38-1)' ... running command line: /export/home/cbt-el7-9/bamboohome/temp/CASA-CMDT7-TTOMLPY38-1-ScriptBuildTask-3043412645768652799.sh ... in: /export/home/cbt-el7-9/bamboohome/xml-data/build-dir/CASA-CMDT7-TTOMLPY38 |
| 24-Apr-2023 14:54:55 | Starting cleanup |
| 24-Apr-2023 14:55:08 | wheel-container-test |
| 24-Apr-2023 14:55:10 | wheel-container-test |
| 24-Apr-2023 14:55:10 | Cleanup complete |
| 24-Apr-2023 14:55:10 | Finished task 'Cleanup' with result: Success |
| 24-Apr-2023 14:55:10 | Running post build plugin 'Docker Container Cleanup' |
| 24-Apr-2023 14:55:10 | Beginning to execute external process for build 'CASA - CMake Dev Test - CAS-14123 - Test Tools Many Linux 2.28 #1 (CASA-CMDT7-TTOMLPY38-1)' ... running command line: /bin/docker rm -f wheel-container-test ... in: /export/home/cbt-el7-9/bamboohome/xml-data/build-dir/CASA-CMDT7-TTOMLPY38 |
| 24-Apr-2023 14:55:10 | Error response from daemon: No such container: wheel-container-test |
| 24-Apr-2023 14:55:10 | Running post build plugin 'NCover Results Collector' |
| 24-Apr-2023 14:55:10 | Running post build plugin 'Clover Results Collector' |
| 24-Apr-2023 14:55:10 | Running post build plugin 'npm Cache Cleanup' |
| 24-Apr-2023 14:55:10 | Running post build plugin 'Artifact Copier' |
| 24-Apr-2023 14:55:10 | Publishing an artifact: Workdir |
| 24-Apr-2023 14:55:10 | Finished publishing of artifact Non required job artifact: [Workdir], pattern: [work*.tar.gz] anchored at: [wheeldirectory/] in 140.9 ms |
| 24-Apr-2023 14:55:10 | Publishing an artifact: Tests |
| 24-Apr-2023 14:55:10 | Finished publishing of artifact Non required job artifact: [Tests], pattern: [*.xml] anchored at: [wheeldirectory/] in 169.9 ms |
| 24-Apr-2023 14:55:10 | Publishing an artifact: xml Directories |
| 24-Apr-2023 14:55:10 | Finished publishing of artifact Non required job artifact: [xml Directories], pattern: [**/*.xml] anchored at: [wheeldirectory/] in 178.1 ms |
| 24-Apr-2023 14:55:10 | Finalising the build... |
| 24-Apr-2023 14:55:10 | Stopping timer. |
| 24-Apr-2023 14:55:10 | Build CASA-CMDT7-TTOMLPY38-1 completed. |
| 24-Apr-2023 14:55:11 | Running on server: post build plugin 'NCover Results Collector' |
| 24-Apr-2023 14:55:11 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
| 24-Apr-2023 14:55:11 | Running on server: post build plugin 'Clover Delta Calculator' |
| 24-Apr-2023 14:55:11 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
| 24-Apr-2023 14:55:11 | All post build plugins have finished |
| 24-Apr-2023 14:55:11 | Generating build results summary... |
| 24-Apr-2023 14:55:11 | Saving build results to disk... |
| 24-Apr-2023 14:55:11 | Store variable context... |
| 24-Apr-2023 14:55:11 | Indexing build results... |
| 24-Apr-2023 14:55:11 | Finished building CASA-CMDT7-TTOMLPY38-1. |