Build: #18 was successful
Job: Test Tools Many Linux 2.28 was successful
Build log
The build generated 52,835 lines of output.The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO CasacRegionManager::fromBCS Using all spectral channels. |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO CasacRegionManager::fromBCS Using polarizations ALL |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageRegion::fromRecord Selected bounding box : |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [8, 8, 99, 0] (17:42:36.087, -29.00.47.589, 1.41335e+09Hz, I to 17:42:35.477, -29.00.39.591, 1.4153e+09Hz, I) |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 WARN ImageProfileFitter::_setFitterElements Only able to estimate parameters for 1 Gaussian singlets. If you really want 2 Gaussian singlets to be fit, you should specify initial parameter estimates for all of them. |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary Number of profiles = 1 |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary Number of fits attempted = 1 |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary Number succeeded = 1 |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary Number converged = 1 |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary Number valid = 1 |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary ****** Fit performed at Thu Jan 11 16:13:51 2024****** |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ Input parameters --- |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ --- imagename: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile/specfit_multipix_2gauss.fits |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ --- region: |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ --- box: |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ --- channels: |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ --- stokes: I |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ --- mask: maskim>-100 |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ --- number of Gaussian singlets: 2 |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ --- number of Gaussian multiplets: 0 |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ --- no polynomial fit |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ --- One profile fit, averaged over several pixels if necessary |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary Fit : |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ RA : 17:42:35.782 |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ Dec : -29.00.43.590 |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ Stokes : I |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ Pixel : [4.000, 4.000, *, 0.000] |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ Attempted : YES |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ Converged : YES |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ Iterations : 7 |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ Valid : YES |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ Type : GAUSSIAN |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ Peak : 49.7 +/- 4.0 Jy |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ Center : -237.7 +/- 1.7 km/s |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ 89.96 +/- 0.40 pixel |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ FWHM : 42.4 +/- 4.0 km/s |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ 10.17 +/- 0.97 pixel |
11-Jan-2024 11:13:50 | 2024-01-11 16:13:51 INFO ImageProfileFitterResults::logSummary+ Integral : 2.25 +/- 0.28 kJy.km/s |
11-Jan-2024 11:13:50 | test_tool_image_fitprofile.py::ia_fitprofile_test::test_stretch |
11-Jan-2024 11:13:50 | ia.fitprofile(): test mask stretch |
11-Jan-2024 11:13:50 | PASSED |
11-Jan-2024 11:13:50 | |
11-Jan-2024 11:13:50 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_fitprofile/nose.xml - |
11-Jan-2024 11:13:50 | ======================== 23 passed, 1 warning in 13.80s ======================== |
11-Jan-2024 11:13:50 | ============================= test session starts ============================== |
11-Jan-2024 11:13:50 | platform linux -- Python 3.8.7, pytest-7.4.4, pluggy-1.3.0 -- /home/casatest/venv/bin/python3.8 |
11-Jan-2024 11:13:50 | cachedir: .pytest_cache |
11-Jan-2024 11:13:50 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater |
11-Jan-2024 11:13:50 | configfile: pytest.ini |
11-Jan-2024 11:13:51 | collecting ... collected 24 items |
11-Jan-2024 11:13:51 | |
11-Jan-2024 11:13:51 | |
11-Jan-2024 11:13:52 | 2024-01-11 16:13:52 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:13:52 | 2024-01-11 16:13:52 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:13:52 | 2024-01-11 16:13:52 INFO Clearing all model records in MS header. |
11-Jan-2024 11:13:52 | 2024-01-11 16:13:52 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:13:53 | 2024-01-11 16:13:54 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:13:54 | 2024-01-11 16:13:54 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:13:54 | 2024-01-11 16:13:54 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:13:54 | 2024-01-11 16:13:54 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
11-Jan-2024 11:13:54 | 2024-01-11 16:13:54 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
11-Jan-2024 11:13:54 | 2024-01-11 16:13:55 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:13:54 | 2024-01-11 16:13:55 INFO calibrater::corrupt Beginning corrupt--------------------------- |
11-Jan-2024 11:13:54 | 2024-01-11 16:13:55 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
11-Jan-2024 11:13:54 | 2024-01-11 16:13:55 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:13:57 | 2024-01-11 16:13:57 INFO calibrater::corrupt Finished corrupting. |
11-Jan-2024 11:13:57 | 2024-01-11 16:13:57 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:13:57 | test_tool_calibrater.py::calibrater_test::test_activityRecord |
11-Jan-2024 11:13:57 | Check that using the calibrater to modify the vis shows in the activity record |
11-Jan-2024 11:13:57 | PASSED |
11-Jan-2024 11:13:57 | |
11-Jan-2024 11:13:57 | 2024-01-11 16:13:58 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:13:57 | 2024-01-11 16:13:58 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:13:57 | 2024-01-11 16:13:58 INFO Clearing all model records in MS header. |
11-Jan-2024 11:13:57 | 2024-01-11 16:13:58 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:13:59 | 2024-01-11 16:13:59 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:13:59 | 2024-01-11 16:14:00 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:13:59 | 2024-01-11 16:14:00 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:13:59 | 2024-01-11 16:14:00 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
11-Jan-2024 11:13:59 | 2024-01-11 16:14:00 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
11-Jan-2024 11:13:59 | 2024-01-11 16:14:00 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:13:59 | 2024-01-11 16:14:00 INFO calibrater::corrupt Beginning corrupt--------------------------- |
11-Jan-2024 11:13:59 | 2024-01-11 16:14:00 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
11-Jan-2024 11:13:59 | 2024-01-11 16:14:00 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:14:02 | 2024-01-11 16:14:03 INFO calibrater::corrupt Finished corrupting. |
11-Jan-2024 11:14:05 | 2024-01-11 16:14:05 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:14:05 | test_tool_calibrater.py::calibrater_test::test_corruptCal |
11-Jan-2024 11:14:05 | Check that the MS is corrupted using the cal table |
11-Jan-2024 11:14:05 | PASSED |
11-Jan-2024 11:14:05 | |
11-Jan-2024 11:14:05 | 2024-01-11 16:14:06 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:14:05 | 2024-01-11 16:14:06 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:14:05 | 2024-01-11 16:14:06 INFO Clearing all model records in MS header. |
11-Jan-2024 11:14:05 | 2024-01-11 16:14:06 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:14:07 | 2024-01-11 16:14:07 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:14:07 | 2024-01-11 16:14:08 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:14:07 | 2024-01-11 16:14:08 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:14:07 | 2024-01-11 16:14:08 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:14:07 | test_tool_calibrater.py::calibrater_test::test_createEmpty |
11-Jan-2024 11:14:07 | Check that an empty cal table can be created |
11-Jan-2024 11:14:07 | PASSED |
11-Jan-2024 11:14:07 | |
11-Jan-2024 11:14:08 | 2024-01-11 16:14:08 INFO name:: No table opened. |
11-Jan-2024 11:14:08 | 2024-01-11 16:14:08 INFO showcache:: The Table Cache is empty. |
11-Jan-2024 11:14:08 | 2024-01-11 16:14:08 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:14:08 | 2024-01-11 16:14:08 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:14:08 | 2024-01-11 16:14:08 INFO Clearing all model records in MS header. |
11-Jan-2024 11:14:08 | 2024-01-11 16:14:08 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO name:: No table opened. |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO showcache:: The Table Cache has the following 16 entries: |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
11-Jan-2024 11:14:09 | 2024-01-11 16:14:10 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:14:10 | test_tool_calibrater.py::calibrater_test::test_done |
11-Jan-2024 11:14:10 | Check that done closes the active calibrator tool |
11-Jan-2024 11:14:10 | PASSED |
11-Jan-2024 11:14:10 | |
11-Jan-2024 11:14:10 | 2024-01-11 16:14:10 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
11-Jan-2024 11:14:10 | 2024-01-11 16:14:10 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
11-Jan-2024 11:14:10 | 2024-01-11 16:14:10 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:14:10 | 2024-01-11 16:14:10 INFO Clearing all model records in MS header. |
11-Jan-2024 11:14:10 | 2024-01-11 16:14:10 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:14:11 | 2024-01-11 16:14:12 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:14:12 | 2024-01-11 16:14:12 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:14:12 | 2024-01-11 16:14:12 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:14:12 | 2024-01-11 16:14:12 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
11-Jan-2024 11:14:12 | 2024-01-11 16:14:12 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
11-Jan-2024 11:14:12 | 2024-01-11 16:14:13 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:14:12 | 2024-01-11 16:14:13 INFO calibrater::correct Beginning correct--------------------------- |
11-Jan-2024 11:14:12 | 2024-01-11 16:14:13 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
11-Jan-2024 11:14:12 | 2024-01-11 16:14:13 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:14:15 | 2024-01-11 16:14:16 INFO calibrater::correct Finished correcting. |
11-Jan-2024 11:14:16 | 2024-01-11 16:14:17 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
11-Jan-2024 11:14:16 | 2024-01-11 16:14:17 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:14:16 | 2024-01-11 16:14:17 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:14:16 | 2024-01-11 16:14:17 INFO calibrater::initcalset Beginning initcalset------------------------ |
11-Jan-2024 11:14:16 | 2024-01-11 16:14:17 INFO VisSet::VisSet Initializing MODEL_DATA (to unity) and CORRECTED_DATA (to DATA) |
11-Jan-2024 11:14:17 | 2024-01-11 16:14:17 INFO VisSet::VisSet Initialized 328860 rows. |
11-Jan-2024 11:14:18 | 2024-01-11 16:14:19 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
11-Jan-2024 11:14:18 | test_tool_calibrater.py::calibrater_test::test_reinitModel |
11-Jan-2024 11:14:18 | Check that initcalset will reset the CORRECTED_DATA to unity |
11-Jan-2024 11:14:18 | PASSED |
11-Jan-2024 11:14:18 | |
11-Jan-2024 11:14:19 | 2024-01-11 16:14:19 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:14:19 | 2024-01-11 16:14:19 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:14:19 | 2024-01-11 16:14:19 INFO Clearing all model records in MS header. |
11-Jan-2024 11:14:19 | 2024-01-11 16:14:19 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:14:20 | 2024-01-11 16:14:21 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:14:20 | 2024-01-11 16:14:21 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:14:20 | 2024-01-11 16:14:21 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:14:20 | 2024-01-11 16:14:21 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
11-Jan-2024 11:14:20 | 2024-01-11 16:14:21 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:21 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:21 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:21 INFO Calibrater::setsolve Arranging to SOLVE: |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:21 INFO Calibrater::setsolve . Mf Mueller: table=gaincaltest2.ms.G0 append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:21 INFO calibrater::reset Reseting solve/apply state |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:21 INFO calibrater::solve Beginning solve----------------------------- |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:21 SEVERE Calibrater::solve Caught exception: Please run setsolve before attempting to solve. |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:21 INFO Calibrater::solve Reseting entire solve/apply state. |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:21 SEVERE Exception Reported: Error in Calibrater::solve. |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:21 INFO calibrater::correct Beginning correct--------------------------- |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:21 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:21 INFO Calibrater::correct2 (VI2/VB2) . (None) |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:21 SEVERE Calibrater::correct2 (VI2/VB2) Caught exception: Nothing to Apply |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:21 INFO Calibrater::correct2 (VI2/VB2) Resetting all calibration application settings. |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:21 SEVERE Exception Reported: Error in Calibrater::correct. |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:21 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:14:21 | test_tool_calibrater.py::calibrater_test::test_resetSolveApply |
11-Jan-2024 11:14:21 | Check that the reset function can clear set apply and solves |
11-Jan-2024 11:14:21 | PASSED |
11-Jan-2024 11:14:21 | |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:22 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:22 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:22 INFO Clearing all model records in MS header. |
11-Jan-2024 11:14:21 | 2024-01-11 16:14:22 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:14:23 | 2024-01-11 16:14:23 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:14:23 | 2024-01-11 16:14:23 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:14:23 | 2024-01-11 16:14:23 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:14:24 | 2024-01-11 16:14:24 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
11-Jan-2024 11:14:24 | 2024-01-11 16:14:24 INFO calibrater::reset Reseting solve/apply state |
11-Jan-2024 11:14:24 | 2024-01-11 16:14:24 INFO Calibrater::selectvis Performing selection on MeasurementSet |
11-Jan-2024 11:14:24 | 2024-01-11 16:14:24 INFO Calibrater::selectvis+ Selecting on spw: '1' |
11-Jan-2024 11:14:24 | 2024-01-11 16:14:24 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
11-Jan-2024 11:14:24 | 2024-01-11 16:14:24 INFO Calibrater::selectvis Frequency selection: |
11-Jan-2024 11:14:24 | 2024-01-11 16:14:24 INFO Calibrater::selectvis . Spw 1:0~7 (8 channels, step by 1) |
11-Jan-2024 11:14:24 | 2024-01-11 16:14:24 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
11-Jan-2024 11:14:24 | 2024-01-11 16:14:24 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:14:24 | test_tool_calibrater.py::calibrater_test::test_returnDict |
11-Jan-2024 11:14:24 | Check that the returndict function gives a dictonary with the expected keys |
11-Jan-2024 11:14:24 | PASSED |
11-Jan-2024 11:14:24 | |
11-Jan-2024 11:14:25 | 2024-01-11 16:14:26 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:14:25 | 2024-01-11 16:14:26 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:14:25 | 2024-01-11 16:14:26 INFO Clearing all model records in MS header. |
11-Jan-2024 11:14:25 | 2024-01-11 16:14:26 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:14:26 | 2024-01-11 16:14:27 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:14:27 | 2024-01-11 16:14:27 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:14:27 | 2024-01-11 16:14:27 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:14:27 | 2024-01-11 16:14:27 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
11-Jan-2024 11:14:27 | 2024-01-11 16:14:27 INFO calibrater::reset Reseting solve/apply state |
11-Jan-2024 11:14:27 | 2024-01-11 16:14:27 INFO Calibrater::selectvis Performing selection on MeasurementSet |
11-Jan-2024 11:14:27 | 2024-01-11 16:14:27 INFO Calibrater::selectvis+ Selecting on antenna/baseline: '0' |
11-Jan-2024 11:14:27 | 2024-01-11 16:14:27 INFO Calibrater::selectvis By selection 328860 rows are reduced to 65772 |
11-Jan-2024 11:14:27 | 2024-01-11 16:14:27 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
11-Jan-2024 11:14:27 | 2024-01-11 16:14:27 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
11-Jan-2024 11:14:27 | 2024-01-11 16:14:27 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
11-Jan-2024 11:14:27 | 2024-01-11 16:14:27 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
11-Jan-2024 11:14:27 | 2024-01-11 16:14:27 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:14:27 | 2024-01-11 16:14:27 INFO calibrater::correct Beginning correct--------------------------- |
11-Jan-2024 11:14:27 | 2024-01-11 16:14:27 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
11-Jan-2024 11:14:27 | 2024-01-11 16:14:27 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:14:29 | 2024-01-11 16:14:29 INFO calibrater::correct Finished correcting. |
11-Jan-2024 11:14:30 | 2024-01-11 16:14:30 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:14:30 | test_tool_calibrater.py::calibrater_test::test_selectVisBaseline |
11-Jan-2024 11:14:30 | Check that selectvis properly selects baseline/antenna |
11-Jan-2024 11:14:30 | 65772 65772 |
11-Jan-2024 11:14:30 | 263088 263088 |
11-Jan-2024 11:14:30 | PASSED |
11-Jan-2024 11:14:30 | |
11-Jan-2024 11:14:31 | 2024-01-11 16:14:32 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:14:31 | 2024-01-11 16:14:32 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:14:31 | 2024-01-11 16:14:32 INFO Clearing all model records in MS header. |
11-Jan-2024 11:14:31 | 2024-01-11 16:14:32 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:14:32 | 2024-01-11 16:14:33 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:14:33 | 2024-01-11 16:14:33 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:14:33 | 2024-01-11 16:14:33 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:14:33 | 2024-01-11 16:14:33 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
11-Jan-2024 11:14:33 | 2024-01-11 16:14:33 INFO calibrater::reset Reseting solve/apply state |
11-Jan-2024 11:14:33 | 2024-01-11 16:14:33 INFO Calibrater::selectvis Performing selection on MeasurementSet |
11-Jan-2024 11:14:33 | 2024-01-11 16:14:33 INFO Calibrater::selectvis+ Selecting on field: '0' |
11-Jan-2024 11:14:33 | 2024-01-11 16:14:33 INFO Calibrater::selectvis By selection 328860 rows are reduced to 172260 |
11-Jan-2024 11:14:33 | 2024-01-11 16:14:33 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
11-Jan-2024 11:14:33 | 2024-01-11 16:14:33 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
11-Jan-2024 11:14:33 | 2024-01-11 16:14:33 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
11-Jan-2024 11:14:33 | 2024-01-11 16:14:33 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
11-Jan-2024 11:14:33 | 2024-01-11 16:14:33 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:14:33 | 2024-01-11 16:14:33 INFO calibrater::correct Beginning correct--------------------------- |
11-Jan-2024 11:14:33 | 2024-01-11 16:14:33 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
11-Jan-2024 11:14:33 | 2024-01-11 16:14:33 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:14:35 | 2024-01-11 16:14:35 INFO calibrater::correct Finished correcting. |
11-Jan-2024 11:14:35 | 2024-01-11 16:14:36 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:14:36 | test_tool_calibrater.py::calibrater_test::test_selectVisField |
11-Jan-2024 11:14:36 | Check that the field is properly selected by selectvis |
11-Jan-2024 11:14:36 | PASSED |
11-Jan-2024 11:14:36 | |
11-Jan-2024 11:14:36 | 2024-01-11 16:14:37 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:14:36 | 2024-01-11 16:14:37 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:14:36 | 2024-01-11 16:14:37 INFO Clearing all model records in MS header. |
11-Jan-2024 11:14:36 | 2024-01-11 16:14:37 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:14:38 | 2024-01-11 16:14:38 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:14:38 | 2024-01-11 16:14:39 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:14:38 | 2024-01-11 16:14:39 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:14:38 | 2024-01-11 16:14:39 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
11-Jan-2024 11:14:38 | 2024-01-11 16:14:39 INFO calibrater::reset Reseting solve/apply state |
11-Jan-2024 11:14:38 | 2024-01-11 16:14:39 INFO Calibrater::selectvis Performing selection on MeasurementSet |
11-Jan-2024 11:14:38 | 2024-01-11 16:14:39 INFO Calibrater::selectvis+ Selecting on intent: '*AMPLI*' |
11-Jan-2024 11:14:38 | 2024-01-11 16:14:39 INFO Calibrater::selectvis Selection did not drop any rows |
11-Jan-2024 11:14:38 | 2024-01-11 16:14:39 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
11-Jan-2024 11:14:38 | 2024-01-11 16:14:39 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
11-Jan-2024 11:14:38 | 2024-01-11 16:14:39 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
11-Jan-2024 11:14:38 | 2024-01-11 16:14:39 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
11-Jan-2024 11:14:38 | 2024-01-11 16:14:39 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:14:38 | 2024-01-11 16:14:39 INFO calibrater::correct Beginning correct--------------------------- |
11-Jan-2024 11:14:38 | 2024-01-11 16:14:39 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
11-Jan-2024 11:14:38 | 2024-01-11 16:14:39 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:14:41 | 2024-01-11 16:14:42 INFO calibrater::correct Finished correcting. |
11-Jan-2024 11:14:41 | 2024-01-11 16:14:42 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:14:42 | test_tool_calibrater.py::calibrater_test::test_selectVisIntent |
11-Jan-2024 11:14:42 | Check that the intent is properly selected by selectvis |
11-Jan-2024 11:14:42 | PASSED |
11-Jan-2024 11:14:42 | |
11-Jan-2024 11:14:42 | 2024-01-11 16:14:43 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:14:42 | 2024-01-11 16:14:43 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:14:42 | 2024-01-11 16:14:43 INFO Clearing all model records in MS header. |
11-Jan-2024 11:14:42 | 2024-01-11 16:14:43 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:14:44 | 2024-01-11 16:14:44 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:14:44 | 2024-01-11 16:14:45 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:14:44 | 2024-01-11 16:14:45 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:14:44 | 2024-01-11 16:14:45 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
11-Jan-2024 11:14:44 | 2024-01-11 16:14:45 INFO calibrater::reset Reseting solve/apply state |
11-Jan-2024 11:14:44 | 2024-01-11 16:14:45 INFO Calibrater::selectvis Performing selection on MeasurementSet |
11-Jan-2024 11:14:44 | 2024-01-11 16:14:45 INFO Calibrater::selectvis+ Selecting by observation IDs: '0' |
11-Jan-2024 11:14:44 | 2024-01-11 16:14:45 INFO Calibrater::selectvis By selection 328860 rows are reduced to 318870 |
11-Jan-2024 11:14:44 | 2024-01-11 16:14:45 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
11-Jan-2024 11:14:44 | 2024-01-11 16:14:45 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
11-Jan-2024 11:14:44 | 2024-01-11 16:14:45 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
11-Jan-2024 11:14:44 | 2024-01-11 16:14:45 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
11-Jan-2024 11:14:44 | 2024-01-11 16:14:45 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:14:44 | 2024-01-11 16:14:45 INFO calibrater::correct Beginning correct--------------------------- |
11-Jan-2024 11:14:44 | 2024-01-11 16:14:45 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
11-Jan-2024 11:14:44 | 2024-01-11 16:14:45 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:14:48 | 2024-01-11 16:14:48 INFO calibrater::correct Finished correcting. |
11-Jan-2024 11:14:48 | 2024-01-11 16:14:48 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:14:48 | test_tool_calibrater.py::calibrater_test::test_selectVisObs |
11-Jan-2024 11:14:48 | PASSED |
11-Jan-2024 11:14:48 | |
11-Jan-2024 11:14:49 | 2024-01-11 16:14:49 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:14:49 | 2024-01-11 16:14:49 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:14:49 | 2024-01-11 16:14:49 INFO Clearing all model records in MS header. |
11-Jan-2024 11:14:49 | 2024-01-11 16:14:49 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:14:50 | 2024-01-11 16:14:51 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:14:51 | 2024-01-11 16:14:51 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:14:51 | 2024-01-11 16:14:51 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:14:51 | 2024-01-11 16:14:51 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
11-Jan-2024 11:14:51 | 2024-01-11 16:14:51 INFO calibrater::reset Reseting solve/apply state |
11-Jan-2024 11:14:51 | 2024-01-11 16:14:51 INFO Calibrater::selectvis Performing selection on MeasurementSet |
11-Jan-2024 11:14:51 | 2024-01-11 16:14:51 INFO Calibrater::selectvis+ Selecting on scan: '2' |
11-Jan-2024 11:14:51 | 2024-01-11 16:14:51 INFO Calibrater::selectvis By selection 328860 rows are reduced to 15660 |
11-Jan-2024 11:14:51 | 2024-01-11 16:14:51 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
11-Jan-2024 11:14:51 | 2024-01-11 16:14:51 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
11-Jan-2024 11:14:51 | 2024-01-11 16:14:51 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
11-Jan-2024 11:14:51 | 2024-01-11 16:14:51 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
11-Jan-2024 11:14:51 | 2024-01-11 16:14:51 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:14:51 | 2024-01-11 16:14:51 INFO calibrater::correct Beginning correct--------------------------- |
11-Jan-2024 11:14:51 | 2024-01-11 16:14:51 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
11-Jan-2024 11:14:51 | 2024-01-11 16:14:51 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:14:51 | 2024-01-11 16:14:51 INFO calibrater::correct Finished correcting. |
11-Jan-2024 11:14:52 | 2024-01-11 16:14:52 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:14:52 | test_tool_calibrater.py::calibrater_test::test_selectVisScan |
11-Jan-2024 11:14:52 | Check tht the scan is properly selected by selectvis |
11-Jan-2024 11:14:52 | PASSED |
11-Jan-2024 11:14:52 | |
11-Jan-2024 11:14:53 | 2024-01-11 16:14:53 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:14:53 | 2024-01-11 16:14:53 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:14:53 | 2024-01-11 16:14:53 INFO Clearing all model records in MS header. |
11-Jan-2024 11:14:53 | 2024-01-11 16:14:53 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:14:54 | 2024-01-11 16:14:55 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:14:54 | 2024-01-11 16:14:55 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:14:54 | 2024-01-11 16:14:55 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:14:54 | 2024-01-11 16:14:55 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
11-Jan-2024 11:14:54 | 2024-01-11 16:14:55 INFO calibrater::reset Reseting solve/apply state |
11-Jan-2024 11:14:54 | 2024-01-11 16:14:55 INFO Calibrater::selectvis Performing selection on MeasurementSet |
11-Jan-2024 11:14:54 | 2024-01-11 16:14:55 INFO Calibrater::selectvis+ Selecting on spw: '0' |
11-Jan-2024 11:14:54 | 2024-01-11 16:14:55 INFO Calibrater::selectvis By selection 328860 rows are reduced to 82215 |
11-Jan-2024 11:14:54 | 2024-01-11 16:14:55 INFO Calibrater::selectvis Frequency selection: |
11-Jan-2024 11:14:54 | 2024-01-11 16:14:55 INFO Calibrater::selectvis . Spw 0:0~7 (8 channels, step by 1) |
11-Jan-2024 11:14:54 | 2024-01-11 16:14:55 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
11-Jan-2024 11:14:54 | 2024-01-11 16:14:55 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
11-Jan-2024 11:14:54 | 2024-01-11 16:14:55 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
11-Jan-2024 11:14:54 | 2024-01-11 16:14:55 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:14:54 | 2024-01-11 16:14:55 INFO calibrater::correct Beginning correct--------------------------- |
11-Jan-2024 11:14:54 | 2024-01-11 16:14:55 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
11-Jan-2024 11:14:54 | 2024-01-11 16:14:55 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:14:55 | 2024-01-11 16:14:56 INFO calibrater::correct Finished correcting. |
11-Jan-2024 11:14:56 | 2024-01-11 16:14:57 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:14:56 | test_tool_calibrater.py::calibrater_test::test_selectVisSpw |
11-Jan-2024 11:14:56 | Check that spw is properly selected by selectvis |
11-Jan-2024 11:14:56 | PASSED |
11-Jan-2024 11:14:56 | |
11-Jan-2024 11:14:57 | 2024-01-11 16:14:57 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:14:57 | 2024-01-11 16:14:57 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:14:57 | 2024-01-11 16:14:58 INFO Clearing all model records in MS header. |
11-Jan-2024 11:14:57 | 2024-01-11 16:14:58 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:14:58 | 2024-01-11 16:14:59 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:14:59 | 2024-01-11 16:14:59 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:14:59 | 2024-01-11 16:14:59 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:14:59 | 2024-01-11 16:14:59 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
11-Jan-2024 11:14:59 | 2024-01-11 16:14:59 INFO calibrater::reset Reseting solve/apply state |
11-Jan-2024 11:14:59 | 2024-01-11 16:14:59 INFO Calibrater::selectvis Performing selection on MeasurementSet |
11-Jan-2024 11:14:59 | 2024-01-11 16:14:59 INFO Calibrater::selectvis+ Selecting on time: '>04:38:23' |
11-Jan-2024 11:14:59 | 2024-01-11 16:14:59 INFO Calibrater::selectvis By selection 328860 rows are reduced to 313200 |
11-Jan-2024 11:14:59 | 2024-01-11 16:14:59 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
11-Jan-2024 11:14:59 | 2024-01-11 16:14:59 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
11-Jan-2024 11:14:59 | 2024-01-11 16:14:59 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
11-Jan-2024 11:14:59 | 2024-01-11 16:14:59 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
11-Jan-2024 11:14:59 | 2024-01-11 16:14:59 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:14:59 | 2024-01-11 16:14:59 INFO calibrater::correct Beginning correct--------------------------- |
11-Jan-2024 11:14:59 | 2024-01-11 16:14:59 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
11-Jan-2024 11:14:59 | 2024-01-11 16:14:59 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:15:02 | 2024-01-11 16:15:02 INFO calibrater::correct Finished correcting. |
11-Jan-2024 11:15:03 | 2024-01-11 16:15:03 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:15:03 | test_tool_calibrater.py::calibrater_test::test_selectVisTime |
11-Jan-2024 11:15:03 | Check that time is properly selected by selectvis |
11-Jan-2024 11:15:03 | PASSED |
11-Jan-2024 11:15:03 | |
11-Jan-2024 11:15:03 | 2024-01-11 16:15:04 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:15:03 | 2024-01-11 16:15:04 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:15:03 | 2024-01-11 16:15:04 INFO Clearing all model records in MS header. |
11-Jan-2024 11:15:03 | 2024-01-11 16:15:04 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:15:04 | 2024-01-11 16:15:05 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:15:05 | 2024-01-11 16:15:05 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:15:05 | 2024-01-11 16:15:05 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:15:05 | 2024-01-11 16:15:05 INFO calibrater::setdata Beginning selectvis--(MSSelection version)------- |
11-Jan-2024 11:15:05 | 2024-01-11 16:15:05 INFO calibrater::reset Reseting solve/apply state |
11-Jan-2024 11:15:05 | 2024-01-11 16:15:05 INFO Calibrater::selectvis Performing selection on MeasurementSet |
11-Jan-2024 11:15:05 | 2024-01-11 16:15:05 INFO Calibrater::selectvis+ Selecting on uvrange: '> 500000lambda' |
11-Jan-2024 11:15:05 | 2024-01-11 16:15:06 INFO Calibrater::selectvis By selection 328860 rows are reduced to 103321 |
11-Jan-2024 11:15:05 | 2024-01-11 16:15:06 INFO Calibrater::selectvis Frequency selection: Selecting all channels in all spws. |
11-Jan-2024 11:15:05 | 2024-01-11 16:15:06 INFO calibrater::setdata chanmode=none nchan=1 start=0 step=1 mStart='0km/s' mStep='0km/s' msSelect='' |
11-Jan-2024 11:15:05 | 2024-01-11 16:15:06 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
11-Jan-2024 11:15:05 | 2024-01-11 16:15:06 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
11-Jan-2024 11:15:05 | 2024-01-11 16:15:06 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:15:05 | 2024-01-11 16:15:06 INFO calibrater::correct Beginning correct--------------------------- |
11-Jan-2024 11:15:05 | 2024-01-11 16:15:06 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
11-Jan-2024 11:15:05 | 2024-01-11 16:15:06 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:15:08 | 2024-01-11 16:15:08 INFO calibrater::correct Finished correcting. |
11-Jan-2024 11:15:08 | 2024-01-11 16:15:09 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:15:08 | test_tool_calibrater.py::calibrater_test::test_selectVisUVrange |
11-Jan-2024 11:15:08 | Check that selectvis properly selects for uvrange |
11-Jan-2024 11:15:08 | PASSED |
11-Jan-2024 11:15:08 | |
11-Jan-2024 11:15:09 | 2024-01-11 16:15:09 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:15:09 | 2024-01-11 16:15:09 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:15:09 | 2024-01-11 16:15:09 INFO Clearing all model records in MS header. |
11-Jan-2024 11:15:09 | 2024-01-11 16:15:09 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:15:10 | 2024-01-11 16:15:10 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:15:10 | 2024-01-11 16:15:11 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:15:10 | 2024-01-11 16:15:11 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:15:10 | 2024-01-11 16:15:11 INFO calibrater::parsecallibfile Beginning parsecallibfile-)------- |
11-Jan-2024 11:15:10 | 2024-01-11 16:15:11 INFO calibrater::setcallib Beginning setcallib--------- |
11-Jan-2024 11:15:10 | 2024-01-11 16:15:11 INFO Calibrater::setcallib2(callib) Arranging to APPLY: |
11-Jan-2024 11:15:10 | 2024-01-11 16:15:11 INFO . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
11-Jan-2024 11:15:10 | 2024-01-11 16:15:11 INFO . 0: |
11-Jan-2024 11:15:10 | 2024-01-11 16:15:11 INFO + MS: obs= scan= fld= intent= spw= |
11-Jan-2024 11:15:10 | 2024-01-11 16:15:11 INFO + CT: tinterp=linear finterp= |
11-Jan-2024 11:15:10 | 2024-01-11 16:15:11 INFO + obsmap=[] scanmap=[] fldmap=[] |
11-Jan-2024 11:15:10 | 2024-01-11 16:15:11 INFO + spwmap=[] antmap=[] |
11-Jan-2024 11:15:10 | 2024-01-11 16:15:11 INFO calibrater::corrupt Beginning corrupt--------------------------- |
11-Jan-2024 11:15:10 | 2024-01-11 16:15:11 INFO Calibrater::corrupt2 (VI2/VB2) The following calibration terms are arranged for apply: |
11-Jan-2024 11:15:10 | 2024-01-11 16:15:11 INFO Calibrater::corrupt2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 (by cal library) calWt=true |
11-Jan-2024 11:15:13 | 2024-01-11 16:15:14 INFO calibrater::corrupt Finished corrupting. |
11-Jan-2024 11:15:14 | 2024-01-11 16:15:14 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:15:14 | test_tool_calibrater.py::calibrater_test::test_setCalLib |
11-Jan-2024 11:15:14 | Check that a provided cal table can be used to corrupt the MODEL_DATA |
11-Jan-2024 11:15:14 | PASSED |
11-Jan-2024 11:15:14 | |
11-Jan-2024 11:15:14 | 2024-01-11 16:15:15 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:15:14 | 2024-01-11 16:15:15 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:15:14 | 2024-01-11 16:15:15 INFO Clearing all model records in MS header. |
11-Jan-2024 11:15:14 | 2024-01-11 16:15:15 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:15:16 | 2024-01-11 16:15:16 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:15:16 | 2024-01-11 16:15:16 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:15:16 | 2024-01-11 16:15:16 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:15:16 | 2024-01-11 16:15:16 INFO Calibrater::setCorrDepFlags Setting correlation dependent flags = True |
11-Jan-2024 11:15:16 | 2024-01-11 16:15:16 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:15:16 | test_tool_calibrater.py::calibrater_test::test_setCorrDepFlags |
11-Jan-2024 11:15:16 | Check that corrdepflags will be checked |
11-Jan-2024 11:15:16 | PASSED |
11-Jan-2024 11:15:16 | |
11-Jan-2024 11:15:16 | 2024-01-11 16:15:17 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:15:16 | 2024-01-11 16:15:17 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
11-Jan-2024 11:15:16 | 2024-01-11 16:15:17 INFO Clearing all model records in MS header. |
11-Jan-2024 11:15:16 | 2024-01-11 16:15:17 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:15:16 | 2024-01-11 16:15:17 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:15:16 | 2024-01-11 16:15:17 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
11-Jan-2024 11:15:16 | 2024-01-11 16:15:17 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:15:16 | 2024-01-11 16:15:17 INFO calibrater::smooth Beginning smooth--(MSSelection version)------- |
11-Jan-2024 11:15:16 | 2024-01-11 16:15:17 INFO Calibrater::smooth Beginning smoothing/interpolating method. |
11-Jan-2024 11:15:16 | 2024-01-11 16:15:17 WARN Found pre-v4.1 caltable (/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ngc5921.gcal); attempting to update... |
11-Jan-2024 11:15:16 | 2024-01-11 16:15:17 WARN + SUCCEEDED: trivial OBSERVATION/OBSERVATION_ID have been added. |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:17 INFO Calibrater::smooth Storing result in testcalout.cal |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:17 INFO Writing solutions to table: testcalout.cal |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:17 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:15:17 | test_tool_calibrater.py::calibrater_test::test_smoothedCalTables |
11-Jan-2024 11:15:17 | Check that the smooth command creates a smoothed cal table |
11-Jan-2024 11:15:17 | PASSED |
11-Jan-2024 11:15:17 | |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:17 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:17 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:17 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:17 INFO Clearing all model records in MS header. |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:17 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO calibrater::setsolvebandpoly Beginning setsolvebandpoly--(MSSelection version)------- |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO Calibrater::setsolvebandpoly Arranging to SOLVE: |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO Calibrater::setsolvebandpoly . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO calibrater::solve Beginning solve----------------------------- |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO Calibrater::solve The following calibration terms are arranged for apply: |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO Calibrater::solve . (None) |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO Calibrater::solve The following calibration term is arranged for solve: |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO Calibrater::solve . BPOLY: table=bpoly append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode= solnorm=true normtype=MEAN |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO Calibrater::solve Solving for BPOLY |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO For solint = inf, found 7 solution intervals. |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.059507/0.0681762/0.0765806 |
11-Jan-2024 11:15:17 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.336529/0.750193/1.6779 |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0630839/0.0689061/0.0756384 |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.279482/0.74979/1.59355 |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0672607/0.089081/0.111106 |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:18 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:19 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.31075/3.32219/4.29305 |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:19 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:19 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0652822/0.0889198/0.116912 |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:19 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:19 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.44269/3.26616/4.3519 |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:19 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
11-Jan-2024 11:15:18 | 2024-01-11 16:15:19 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
11-Jan-2024 11:15:19 | 2024-01-11 16:15:19 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
11-Jan-2024 11:15:19 | 2024-01-11 16:15:19 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
11-Jan-2024 11:15:19 | 2024-01-11 16:15:19 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
11-Jan-2024 11:15:19 | 2024-01-11 16:15:19 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
11-Jan-2024 11:15:19 | 2024-01-11 16:15:19 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
11-Jan-2024 11:15:19 | 2024-01-11 16:15:19 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
11-Jan-2024 11:15:19 | 2024-01-11 16:15:19 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
11-Jan-2024 11:15:19 | 2024-01-11 16:15:19 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
11-Jan-2024 11:15:19 | 2024-01-11 16:15:19 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
11-Jan-2024 11:15:19 | 2024-01-11 16:15:19 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350681/0.587724/0.894558 |
11-Jan-2024 11:15:19 | 2024-01-11 16:15:19 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
11-Jan-2024 11:15:21 | 2024-01-11 16:15:22 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.296/59.0077/111.454 |
11-Jan-2024 11:15:21 | 2024-01-11 16:15:22 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
11-Jan-2024 11:15:21 | 2024-01-11 16:15:22 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.354236/0.581733/0.988903 |
11-Jan-2024 11:15:21 | 2024-01-11 16:15:22 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:24 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 17.2419/56.3249/117.264 |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:24 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:24 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:24 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:24 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:24 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:24 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:24 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:24 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:24 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:24 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:24 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:24 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0850169/0.113968/0.15276 |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:24 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.67561/5.33243/8.17296 |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0784236/0.114345/0.159908 |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.46392/5.27232/7.20673 |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0703936/0.102501/0.131676 |
11-Jan-2024 11:15:24 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.98728/4.47977/5.84264 |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0751114/0.102994/0.138529 |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:25 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:26 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.18629/4.47068/5.8941 |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:26 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:26 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:26 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:26 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:26 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:26 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:26 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:26 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:26 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:26 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:26 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:26 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350626/0.604424/0.974388 |
11-Jan-2024 11:15:25 | 2024-01-11 16:15:26 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
11-Jan-2024 11:15:28 | 2024-01-11 16:15:28 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.2542/59.3511/120.719 |
11-Jan-2024 11:15:28 | 2024-01-11 16:15:28 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
11-Jan-2024 11:15:28 | 2024-01-11 16:15:28 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.382806/0.598119/0.941571 |
11-Jan-2024 11:15:28 | 2024-01-11 16:15:28 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
11-Jan-2024 11:15:30 | 2024-01-11 16:15:31 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 20.0637/57.2112/118.101 |
11-Jan-2024 11:15:30 | 2024-01-11 16:15:31 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
11-Jan-2024 11:15:30 | 2024-01-11 16:15:31 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
11-Jan-2024 11:15:30 | 2024-01-11 16:15:31 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
11-Jan-2024 11:15:30 | 2024-01-11 16:15:31 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
11-Jan-2024 11:15:30 | 2024-01-11 16:15:31 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
11-Jan-2024 11:15:30 | 2024-01-11 16:15:31 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
11-Jan-2024 11:15:30 | 2024-01-11 16:15:31 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
11-Jan-2024 11:15:30 | 2024-01-11 16:15:31 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
11-Jan-2024 11:15:30 | 2024-01-11 16:15:31 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
11-Jan-2024 11:15:30 | 2024-01-11 16:15:31 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
11-Jan-2024 11:15:30 | 2024-01-11 16:15:31 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
11-Jan-2024 11:15:30 | 2024-01-11 16:15:31 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0750931/0.0978998/0.125897 |
11-Jan-2024 11:15:30 | 2024-01-11 16:15:31 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
11-Jan-2024 11:15:31 | 2024-01-11 16:15:31 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.72932/3.98787/5.33715 |
11-Jan-2024 11:15:31 | 2024-01-11 16:15:31 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
11-Jan-2024 11:15:31 | 2024-01-11 16:15:31 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0658572/0.0972125/0.140794 |
11-Jan-2024 11:15:31 | 2024-01-11 16:15:31 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
11-Jan-2024 11:15:31 | 2024-01-11 16:15:32 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.97943/3.97841/5.72903 |
11-Jan-2024 11:15:31 | 2024-01-11 16:15:32 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
11-Jan-2024 11:15:31 | 2024-01-11 16:15:32 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
11-Jan-2024 11:15:31 | 2024-01-11 16:15:32 INFO Calibrater::solve Found good BPOLY solutions in 7 slots. |
11-Jan-2024 11:15:31 | 2024-01-11 16:15:32 INFO calibrater::solve Finished solving. |
11-Jan-2024 11:15:31 | 2024-01-11 16:15:32 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
11-Jan-2024 11:15:31 | test_tool_calibrater.py::calibrater_test::test_solveBandpass |
11-Jan-2024 11:15:31 | Check that solve band poly creates the output table |
11-Jan-2024 11:15:31 | PASSED |
11-Jan-2024 11:15:31 | |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO Clearing all model records in MS header. |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO calibrater::setsolvegainspline Beginning setsolvegainspline--(MSSelection version)------- |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO Calibrater::setsolvegainspline Arranging to SOLVE: |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO Calibrater::setsolvegainspline . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO calibrater::solve Beginning solve----------------------------- |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO Calibrater::solve The following calibration terms are arranged for apply: |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO Calibrater::solve . (None) |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO Calibrater::solve The following calibration term is arranged for solve: |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO Calibrater::solve . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO GJonesSpline::solve() Fitting time-dependent cubic splines. |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO GJonesSpline::solve() Solving for phase splines with splinetime= 10800 |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO GJonesSpline::solve() Solving for amplitude splines with splinetime= 10800 |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO GJonesSpline::solve() Accumulating data for: field= 1331+30500002_0, spw= 0, nchan= 63 |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63 |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:32 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63 |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:33 INFO GJonesSpline::solve() Number of timestamps in data = 60 |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:33 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec. |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:33 INFO GJonesSpline::solve() Number of cubic spline control points = 4 |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:33 INFO GJonesSpline::solve() Number of cubic spline knots = 8 |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:33 INFO GJonesSpline::solve() Number of cubic spline segments = 1 |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:33 INFO GJonesSpline::solve() Fitting amplitude spline. |
11-Jan-2024 11:15:32 | test_tool_calibrater.py::calibrater_test::test_solveGainspline DPBTRF ;problem leading minor 23 |
11-Jan-2024 11:15:32 | DPBTRF ;problem leading minor 23 |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:33 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline. |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:33 INFO GJonesSpline::solve() Fitting phase spline. |
11-Jan-2024 11:15:32 | DPBTRF ;problem leading minor 22 |
11-Jan-2024 11:15:32 | DPBTRF ;problem leading minor 22 |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:33 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:33 INFO calibrater::solve Finished solving. |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:33 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
11-Jan-2024 11:15:32 | |
11-Jan-2024 11:15:32 | Check that solve gain spline creates the output table |
11-Jan-2024 11:15:32 | PASSED |
11-Jan-2024 11:15:32 | |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:33 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:33 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:33 INFO Clearing all model records in MS header. |
11-Jan-2024 11:15:32 | 2024-01-11 16:15:33 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:15:34 | 2024-01-11 16:15:34 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:15:34 | 2024-01-11 16:15:35 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:15:34 | 2024-01-11 16:15:35 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:15:34 | 2024-01-11 16:15:35 INFO calibrater::specifycal Beginning specifycal----------------------- |
11-Jan-2024 11:15:34 | 2024-01-11 16:15:35 INFO Creating G Jones table from specified parameters. |
11-Jan-2024 11:15:34 | 2024-01-11 16:15:35 INFO Generating 'G' corrections. |
11-Jan-2024 11:15:34 | 2024-01-11 16:15:35 INFO Specified parameter(s) (per spw and pol) repeated on all antennas. |
11-Jan-2024 11:15:34 | 2024-01-11 16:15:35 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations. |
11-Jan-2024 11:15:34 | 2024-01-11 16:15:35 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9]) |
11-Jan-2024 11:15:34 | 2024-01-11 16:15:35 INFO Writing solutions to table: testcalout.cal |
11-Jan-2024 11:15:34 | 2024-01-11 16:15:35 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:15:34 | test_tool_calibrater.py::calibrater_test::test_specifyCal |
11-Jan-2024 11:15:34 | Check that specifycal can set values for specific spws and antennas |
11-Jan-2024 11:15:34 | PASSED |
11-Jan-2024 11:15:34 | |
11-Jan-2024 11:15:35 | 2024-01-11 16:15:35 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
11-Jan-2024 11:15:35 | 2024-01-11 16:15:35 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
11-Jan-2024 11:15:35 | 2024-01-11 16:15:35 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:15:35 | 2024-01-11 16:15:35 INFO Clearing all model records in MS header. |
11-Jan-2024 11:15:35 | 2024-01-11 16:15:35 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:15:36 | 2024-01-11 16:15:36 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:15:36 | 2024-01-11 16:15:37 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:15:36 | 2024-01-11 16:15:37 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:15:36 | 2024-01-11 16:15:37 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
11-Jan-2024 11:15:36 | 2024-01-11 16:15:37 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
11-Jan-2024 11:15:37 | 2024-01-11 16:15:37 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:15:37 | 2024-01-11 16:15:37 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
11-Jan-2024 11:15:37 | 2024-01-11 16:15:37 INFO Calibrater::setsolve Arranging to SOLVE: |
11-Jan-2024 11:15:37 | 2024-01-11 16:15:37 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
11-Jan-2024 11:15:37 | 2024-01-11 16:15:37 INFO Calibrater::state The following calibration terms are arranged for apply: |
11-Jan-2024 11:15:37 | 2024-01-11 16:15:37 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:15:37 | 2024-01-11 16:15:37 INFO Calibrater::state The following calibration term is arranged for solve: |
11-Jan-2024 11:15:37 | 2024-01-11 16:15:37 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
11-Jan-2024 11:15:37 | 2024-01-11 16:15:37 INFO calibrater::solve Beginning solve----------------------------- |
11-Jan-2024 11:15:37 | 2024-01-11 16:15:37 INFO Calibrater::solve The following calibration terms are arranged for apply: |
11-Jan-2024 11:15:37 | 2024-01-11 16:15:37 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:15:37 | 2024-01-11 16:15:37 INFO Calibrater::solve The following calibration term is arranged for solve: |
11-Jan-2024 11:15:37 | 2024-01-11 16:15:37 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
11-Jan-2024 11:15:37 | 2024-01-11 16:15:37 INFO Solving for Mf Mueller |
11-Jan-2024 11:15:37 | 2024-01-11 16:15:37 INFO For solint = inf, found 84 solution intervals. |
11-Jan-2024 11:15:39 | 2024-01-11 16:15:39 INFO Found good Mf Mueller solutions in 84 intervals. |
11-Jan-2024 11:15:39 | 2024-01-11 16:15:39 INFO Writing solutions to table: output.ms |
11-Jan-2024 11:15:39 | 2024-01-11 16:15:39 INFO calibrater::solve Finished solving. |
11-Jan-2024 11:15:39 | 2024-01-11 16:15:39 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
11-Jan-2024 11:15:39 | test_tool_calibrater.py::calibrater_test::test_standardPath |
11-Jan-2024 11:15:39 | open setapply setsolve state solve close |
11-Jan-2024 11:15:39 | PASSED |
11-Jan-2024 11:15:39 | |
11-Jan-2024 11:15:39 | 2024-01-11 16:15:40 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:15:39 | 2024-01-11 16:15:40 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:15:39 | 2024-01-11 16:15:40 INFO Clearing all model records in MS header. |
11-Jan-2024 11:15:39 | 2024-01-11 16:15:40 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO name:: No table opened. |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: The Table Cache has the following 16 entries: |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO name:: No table opened. |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 INFO showcache:: The Table Cache is empty. |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:41 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:15:41 | test_tool_calibrater.py::calibrater_test::test_takesMs |
11-Jan-2024 11:15:41 | Check that the calibrater tool can open and close an MS |
11-Jan-2024 11:15:41 | PASSED |
11-Jan-2024 11:15:41 | |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:42 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:42 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:42 INFO Clearing all model records in MS header. |
11-Jan-2024 11:15:41 | 2024-01-11 16:15:42 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
11-Jan-2024 11:15:43 | 2024-01-11 16:15:43 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
11-Jan-2024 11:15:43 | 2024-01-11 16:15:44 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
11-Jan-2024 11:15:43 | 2024-01-11 16:15:44 INFO Calibrater:: Initializing nominal selection to the whole MS. |
11-Jan-2024 11:15:43 | 2024-01-11 16:15:44 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
11-Jan-2024 11:15:43 | 2024-01-11 16:15:44 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
11-Jan-2024 11:15:43 | 2024-01-11 16:15:44 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:15:43 | 2024-01-11 16:15:44 INFO calibrater::correct Beginning correct--------------------------- |
11-Jan-2024 11:15:43 | 2024-01-11 16:15:44 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
11-Jan-2024 11:15:43 | 2024-01-11 16:15:44 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
11-Jan-2024 11:15:46 | 2024-01-11 16:15:47 INFO calibrater::correct Finished correcting. |
11-Jan-2024 11:15:46 | 2024-01-11 16:15:47 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
11-Jan-2024 11:15:46 | test_tool_calibrater.py::calibrater_test::test_writeToCorrected |
11-Jan-2024 11:15:46 | Check that the tool writes to the CORRECTED_DATA column |
11-Jan-2024 11:15:46 | PASSED |
11-Jan-2024 11:15:46 | |
11-Jan-2024 11:15:46 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml - |
11-Jan-2024 11:15:46 | ================== 24 passed, 1 warning in 115.95s (0:01:55) =================== |
11-Jan-2024 11:15:47 | ============================= test session starts ============================== |
11-Jan-2024 11:15:47 | platform linux -- Python 3.8.7, pytest-7.4.4, pluggy-1.3.0 -- /home/casatest/venv/bin/python3.8 |
11-Jan-2024 11:15:47 | cachedir: .pytest_cache |
11-Jan-2024 11:15:47 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims |
11-Jan-2024 11:15:47 | configfile: pytest.ini |
11-Jan-2024 11:15:47 | collecting ... collected 1 item |
11-Jan-2024 11:15:47 | |
11-Jan-2024 11:15:47 | |
11-Jan-2024 11:15:49 | 2024-01-11 16:15:50 INFO ms::createmultims Copying subtables from part1.ms to the other MMS members. |
11-Jan-2024 11:15:56 | 2024-01-11 16:15:57 INFO name:: No table opened. |
11-Jan-2024 11:15:56 | 2024-01-11 16:15:57 INFO name:: No table opened. |
11-Jan-2024 11:15:56 | test_tool_ms_createmultims.py::test_createmultims::test1 |
11-Jan-2024 11:15:56 | Test_createmultims 1: 4 parts, same sources but different spws |
11-Jan-2024 11:15:56 | Copying part1.ms |
11-Jan-2024 11:15:56 | Copying part2-mod.ms |
11-Jan-2024 11:15:56 | Copying part2-mod2.ms |
11-Jan-2024 11:15:56 | Copying part2.ms |
11-Jan-2024 11:15:56 | Copying part3.ms |
11-Jan-2024 11:15:56 | Copying part4.ms |
11-Jan-2024 11:15:56 | PASSED |
11-Jan-2024 11:15:56 | |
11-Jan-2024 11:15:56 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_createmultims/nose.xml - |
11-Jan-2024 11:15:56 | ========================= 1 passed, 1 warning in 9.66s ========================= |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/ |
11-Jan-2024 11:15:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_simulator/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/ |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
11-Jan-2024 11:15:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pbcor/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/ |
11-Jan-2024 11:15:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_componentlist/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/ |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_measures/ |
11-Jan-2024 11:15:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_measures |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_measures/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_measures/ |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta/ |
11-Jan-2024 11:15:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_quanta/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta/ |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
11-Jan-2024 11:15:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_sdm/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
11-Jan-2024 11:15:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_statwt/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms/ |
11-Jan-2024 11:15:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_sdm_toms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms/ |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
11-Jan-2024 11:15:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_transpose/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse/ |
11-Jan-2024 11:15:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_collapse/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse/ |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
11-Jan-2024 11:15:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_regrid/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
11-Jan-2024 11:15:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_rebin/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
11-Jan-2024 11:15:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_agentflagger/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_table/ |
11-Jan-2024 11:15:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_table |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_table/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_table/ |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
11-Jan-2024 11:15:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_fitprofile/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_fitprofile/ |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
11-Jan-2024 11:15:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
11-Jan-2024 11:15:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims |
11-Jan-2024 11:15:57 | |
11-Jan-2024 11:15:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_createmultims/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
11-Jan-2024 11:15:58 | total 175100 |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci 15001 113734 Jan 11 15:54 casatestutils-6.6.3.18a14089.dev16+dirty-py3-none-any.whl |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci 15001 179020091 Jan 11 15:54 casatools-6.6.3.18a14089.dev16+dirty-cp38-cp38-manylinux_2_28_x86_64.whl |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 4314 Jan 11 16:15 test_tool_agentflagger.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 980 Jan 11 16:15 test_tool_calanalysis.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 2632 Jan 11 16:15 test_tool_calibrater.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 545 Jan 11 16:15 test_tool_componentlist.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 7441 Jan 11 16:15 test_tool_coordsys.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 12801 Jan 11 16:15 test_tool_image.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 2194 Jan 11 16:15 test_tool_image_collapse.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 1022 Jan 11 16:15 test_tool_image_deviation.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 2549 Jan 11 16:15 test_tool_image_fitprofile.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 1152 Jan 11 16:15 test_tool_image_pbcor.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 857 Jan 11 16:15 test_tool_image_pv.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 980 Jan 11 16:15 test_tool_image_rebin.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 1310 Jan 11 16:15 test_tool_image_regrid.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 1507 Jan 11 16:15 test_tool_image_statistics.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 739 Jan 11 16:15 test_tool_image_subimage.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 864 Jan 11 16:15 test_tool_image_transpose.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 1940 Jan 11 16:15 test_tool_imagepol.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 813 Jan 11 16:15 test_tool_linearmosaic.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 642 Jan 11 16:15 test_tool_logsink.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 523 Jan 11 16:15 test_tool_measures.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 5198 Jan 11 16:15 test_tool_ms.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 341 Jan 11 16:15 test_tool_ms_createmultims.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 2069 Jan 11 16:15 test_tool_ms_statwt.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 8486 Jan 11 16:15 test_tool_msmetadata.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 333 Jan 11 16:15 test_tool_msuvbinner.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 1145 Jan 11 16:15 test_tool_quanta.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 3951 Jan 11 16:15 test_tool_regionmanager.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 2046 Jan 11 16:15 test_tool_sdm.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 2070 Jan 11 16:15 test_tool_sdm_toms.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 422 Jan 11 16:15 test_tool_simulator.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 1337 Jan 11 16:15 test_tool_table.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 1691 Jan 11 16:15 test_tool_vpmanager.xml |
11-Jan-2024 11:15:58 | Finished task 'Test wheel' with result: Success |
11-Jan-2024 11:15:58 | Starting task 'Tar work directory' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
11-Jan-2024 11:15:58 | Beginning to execute external process for build 'CASA - CMake CI Build - CAS-14089 - Test Tools Many Linux 2.28 #18 (CASA-CMAKECI95-TTOML228-18)' ... running command line: /export/home/cbt-el7-2/bamboohome/temp/CASA-CMAKECI95-TTOML228-18-ScriptBuildTask-3517269180943276378.sh ... in: /export/home/cbt-el7-2/bamboohome/xml-data/build-dir/CASA-CMAKECI95-TTOML228 |
11-Jan-2024 11:15:58 | Package working directory |
11-Jan-2024 11:15:58 | tar: work: Cannot stat: No such file or directory |
11-Jan-2024 11:15:58 | tar: Exiting with failure status due to previous errors |
11-Jan-2024 11:15:58 | total 175104 |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci 15001 113734 Jan 11 15:54 casatestutils-6.6.3.18a14089.dev16+dirty-py3-none-any.whl |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci 15001 179020091 Jan 11 15:54 casatools-6.6.3.18a14089.dev16+dirty-cp38-cp38-manylinux_2_28_x86_64.whl |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 4314 Jan 11 16:15 test_tool_agentflagger.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 980 Jan 11 16:15 test_tool_calanalysis.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 2632 Jan 11 16:15 test_tool_calibrater.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 545 Jan 11 16:15 test_tool_componentlist.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 7441 Jan 11 16:15 test_tool_coordsys.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 12801 Jan 11 16:15 test_tool_image.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 2194 Jan 11 16:15 test_tool_image_collapse.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 1022 Jan 11 16:15 test_tool_image_deviation.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 2549 Jan 11 16:15 test_tool_image_fitprofile.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 1152 Jan 11 16:15 test_tool_image_pbcor.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 857 Jan 11 16:15 test_tool_image_pv.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 980 Jan 11 16:15 test_tool_image_rebin.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 1310 Jan 11 16:15 test_tool_image_regrid.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 1507 Jan 11 16:15 test_tool_image_statistics.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 739 Jan 11 16:15 test_tool_image_subimage.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 864 Jan 11 16:15 test_tool_image_transpose.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 1940 Jan 11 16:15 test_tool_imagepol.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 813 Jan 11 16:15 test_tool_linearmosaic.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 642 Jan 11 16:15 test_tool_logsink.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 523 Jan 11 16:15 test_tool_measures.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 5198 Jan 11 16:15 test_tool_ms.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 341 Jan 11 16:15 test_tool_ms_createmultims.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 2069 Jan 11 16:15 test_tool_ms_statwt.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 8486 Jan 11 16:15 test_tool_msmetadata.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 333 Jan 11 16:15 test_tool_msuvbinner.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 1145 Jan 11 16:15 test_tool_quanta.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 3951 Jan 11 16:15 test_tool_regionmanager.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 2046 Jan 11 16:15 test_tool_sdm.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 2070 Jan 11 16:15 test_tool_sdm_toms.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 422 Jan 11 16:15 test_tool_simulator.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 1337 Jan 11 16:15 test_tool_table.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 1691 Jan 11 16:15 test_tool_vpmanager.xml |
11-Jan-2024 11:15:58 | -rw-r--r-- 1 casaci root 45 Jan 11 16:15 work-el7-3.8.tar.gz |
11-Jan-2024 11:15:58 | Done packaging working directory |
11-Jan-2024 11:15:58 | Finished task 'Tar work directory' with result: Success |
11-Jan-2024 11:15:58 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
11-Jan-2024 11:15:58 | Parsing test results under /export/home/cbt-el7-2/bamboohome/xml-data/build-dir/CASA-CMAKECI95-TTOML228... |
11-Jan-2024 11:15:58 | Finished task 'Parse tests' with result: Success |
11-Jan-2024 11:15:58 | Skipping execution of task 'Upload wheel' as it is disabled |
11-Jan-2024 11:15:58 | Starting task 'Cleanup' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
11-Jan-2024 11:15:58 | Beginning to execute external process for build 'CASA - CMake CI Build - CAS-14089 - Test Tools Many Linux 2.28 #18 (CASA-CMAKECI95-TTOML228-18)' ... running command line: /export/home/cbt-el7-2/bamboohome/temp/CASA-CMAKECI95-TTOML228-18-ScriptBuildTask-1310414302380416248.sh ... in: /export/home/cbt-el7-2/bamboohome/xml-data/build-dir/CASA-CMAKECI95-TTOML228 |
11-Jan-2024 11:15:58 | Starting cleanup |
11-Jan-2024 11:16:09 | wheel-container-test |
11-Jan-2024 11:16:11 | wheel-container-test |
11-Jan-2024 11:16:11 | Cleanup complete |
11-Jan-2024 11:16:11 | Finished task 'Cleanup' with result: Success |
11-Jan-2024 11:16:11 | Running post build plugin 'Docker Container Cleanup' |
11-Jan-2024 11:16:11 | Beginning to execute external process for build 'CASA - CMake CI Build - CAS-14089 - Test Tools Many Linux 2.28 #18 (CASA-CMAKECI95-TTOML228-18)' ... running command line: /bin/docker rm -f wheel-container-test ... in: /export/home/cbt-el7-2/bamboohome/xml-data/build-dir/CASA-CMAKECI95-TTOML228 |
11-Jan-2024 11:16:11 | Error response from daemon: No such container: wheel-container-test |
11-Jan-2024 11:16:11 | Running post build plugin 'NCover Results Collector' |
11-Jan-2024 11:16:11 | Running post build plugin 'Build Results Label Collector' |
11-Jan-2024 11:16:11 | Running post build plugin 'Clover Results Collector' |
11-Jan-2024 11:16:11 | Running post build plugin 'npm Cache Cleanup' |
11-Jan-2024 11:16:11 | Running post build plugin 'Artifact Copier' |
11-Jan-2024 11:16:11 | Publishing an artifact: Workdir |
11-Jan-2024 11:16:11 | Finished publishing of artifact Non required job artifact Http Compression On : [Workdir], patterns: [work*.tar.gz] anchored at: [wheeldirectory/] in 124.8 ms |
11-Jan-2024 11:16:11 | Publishing an artifact: Tests |
11-Jan-2024 11:16:11 | Finished publishing of artifact Non required job artifact Http Compression On : [Tests], patterns: [*.xml] anchored at: [wheeldirectory/] in 211.8 ms |
11-Jan-2024 11:16:11 | Publishing an artifact: xml Directories |
11-Jan-2024 11:16:11 | Finished publishing of artifact Non required job artifact Http Compression On : [xml Directories], patterns: [**/*.xml] anchored at: [wheeldirectory/] in 268.4 ms |
11-Jan-2024 11:16:11 | Finalising the build... |
11-Jan-2024 11:16:11 | Stopping timer. |
11-Jan-2024 11:16:11 | Build CASA-CMAKECI95-TTOML228-18 completed. |
11-Jan-2024 11:16:12 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
11-Jan-2024 11:16:12 | Running on server: post build plugin 'NCover Results Collector' |
11-Jan-2024 11:16:12 | Running on server: post build plugin 'Build Labeller' |
11-Jan-2024 11:16:12 | Running on server: post build plugin 'Clover Delta Calculator' |
11-Jan-2024 11:16:12 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
11-Jan-2024 11:16:12 | All post build plugins have finished |
11-Jan-2024 11:16:12 | Generating build results summary... |
11-Jan-2024 11:16:12 | Saving build results to disk... |
11-Jan-2024 11:16:12 | Store variable context... |
11-Jan-2024 11:16:12 | Finished building CASA-CMAKECI95-TTOML228-18. |