(gnome-ssh-askpass:11896): Gtk-WARNING **: 02:47:49.998: cannot open display:
error: unable to read askpass response from '/usr/libexec/openssh/gnome-ssh-askpass'
fatal: could not read Username for 'https://open-bitbucket.nrao.edu': No such device or address
Error response from daemon: No such container: wheel-container-test
Error response from daemon: No such container: wheel-container-test
2023-12-28 08:19:30        INFO        GJonesSpline::solve()         Accumulating data for:  field= 1445+09900002_0, spw= 0, nchan= 63
2023-12-28 08:19:30        INFO        GJonesSpline::solve()         Accumulating data for:  field= N5921_2, spw= 0, nchan= 63
2023-12-28 08:19:30        INFO        GJonesSpline::solve()         Number of timestamps in data = 60
2023-12-28 08:19:30        INFO        GJonesSpline::getKnots()         Gridded splinetime = 5280 sec.
2023-12-28 08:19:30        INFO        GJonesSpline::solve()         Number of cubic spline control points = 4
2023-12-28 08:19:30        INFO        GJonesSpline::solve()         Number of cubic spline knots = 8
2023-12-28 08:19:30        INFO        GJonesSpline::solve()         Number of cubic spline segments = 1
2023-12-28 08:19:30        INFO        GJonesSpline::solve()         Fitting amplitude spline.
2023-12-28 08:19:30        INFO        GJonesSpline::solve()         Searching for and correcting phase-wraps on each baseline.
2023-12-28 08:19:30        INFO        GJonesSpline::solve()         Fitting phase spline.
2023-12-28 08:19:30        INFO        GJonesSpline::updateCalTable         Storing solutions in table gainspline
2023-12-28 08:19:30        INFO        calibrater::solve        Finished solving.
2023-12-28 08:19:31        WARN        calibrater::setvi(bool,bool)        Forcing use of NEW VisibilityIterator.
2023-12-28 08:19:31        INFO        calibrater::open        ****Using NEW VI2-driven calibrater tool****
2023-12-28 08:19:31        INFO        calibrater::open        Opening MS: gaincaltest2.ms for calibration.
2023-12-28 08:19:31        INFO                Clearing all model records in MS header.
2023-12-28 08:19:31        INFO        VisSetUtil::addScrCols        Adding MODEL_DATA and CORRECTED_DATA column(s).
2023-12-28 08:19:32        INFO        VisSetUtil::initScrCols        Initializing MODEL_DATA to (unity).
2023-12-28 08:19:33        INFO        VisSetUtil::initScrCols        Initialized 328860 rows.
2023-12-28 08:19:33        INFO        Calibrater::        Initializing nominal selection to the whole MS.
2023-12-28 08:19:33        INFO        calibrater::specifycal        Beginning specifycal-----------------------
2023-12-28 08:19:33        INFO                Creating G Jones table from specified parameters.
2023-12-28 08:19:33        INFO                Generating 'G' corrections.
2023-12-28 08:19:33        INFO                Specified parameter(s) (per spw and pol) repeated on all antennas.
2023-12-28 08:19:33        INFO                Specified parameter(s) (per spw and antenna) repeated on all polarizations.
2023-12-28 08:19:33        INFO                spwId=1 antId=<all> polId=<all> parameter= 3   (ip0,ip1 = [0, 0, 0],[1, 0, 9])
2023-12-28 08:19:33        INFO                Writing solutions to table: testcalout.cal
2023-12-28 08:19:34        WARN        calibrater::setvi(bool,bool)        Already using NEW VisibilityIterator.
2023-12-28 08:19:34        WARN        calibrater::setvi(bool,bool)        Forcing use of OLD VisibilityIterator.
2023-12-28 08:19:34        INFO        calibrater::open        ****Using OLD VI-driven calibrater tool****
2023-12-28 08:19:34        INFO        calibrater::open        Opening MS: gaincaltest2.ms for calibration.
2023-12-28 08:19:34        INFO                Clearing all model records in MS header.
2023-12-28 08:19:34        INFO        VisSetUtil::addScrCols        Adding MODEL_DATA and CORRECTED_DATA column(s).
2023-12-28 08:19:35        INFO        VisSetUtil::initScrCols        Initializing MODEL_DATA to (unity).
2023-12-28 08:19:36        INFO        VisSetUtil::initScrCols        Initialized 328860 rows.
2023-12-28 08:19:36        INFO        Calibrater::        Initializing nominal selection to the whole MS.
2023-12-28 08:19:36        INFO        calibrater::setapply        Beginning setapply--(MSSelection version)-------
2023-12-28 08:19:36        INFO        Calibrater::setapply(type, applypar)        Arranging to APPLY:
2023-12-28 08:19:36        INFO        Calibrater::setapply(type, applypar)        .   G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2023-12-28 08:19:36        INFO        calibrater::setsolve        Beginning setsolve--(MSSelection version)-------
2023-12-28 08:19:36        INFO        Calibrater::setsolve        Arranging to SOLVE:
2023-12-28 08:19:36        INFO        Calibrater::setsolve        .   Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2023-12-28 08:19:36        INFO        Calibrater::state        The following calibration terms are arranged for apply:
2023-12-28 08:19:36        INFO        Calibrater::state        .   G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2023-12-28 08:19:36        INFO        Calibrater::state        The following calibration term is arranged for solve:
2023-12-28 08:19:36        INFO        Calibrater::state        .   Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2023-12-28 08:19:36        INFO        calibrater::solve        Beginning solve-----------------------------
2023-12-28 08:19:36        INFO        Calibrater::solve        The following calibration terms are arranged for apply:
2023-12-28 08:19:36        INFO        Calibrater::solve        .   G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2023-12-28 08:19:36        INFO        Calibrater::solve        The following calibration term is arranged for solve:
2023-12-28 08:19:36        INFO        Calibrater::solve        .   Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2023-12-28 08:19:36        INFO                Solving for Mf Mueller
2023-12-28 08:19:36        INFO                For solint = inf, found 84 solution intervals.
2023-12-28 08:19:38        INFO                  Found good Mf Mueller solutions in 84 intervals.
2023-12-28 08:19:38        INFO                Writing solutions to table: output.ms
2023-12-28 08:19:39        INFO        calibrater::solve        Finished solving.
2023-12-28 08:19:39        WARN        calibrater::setvi(bool,bool)        Forcing use of NEW VisibilityIterator.
2023-12-28 08:19:39        INFO        calibrater::open        ****Using NEW VI2-driven calibrater tool****
2023-12-28 08:19:39        INFO        calibrater::open        Opening MS: gaincaltest2.ms for calibration.
2023-12-28 08:19:39        INFO                Clearing all model records in MS header.
2023-12-28 08:19:39        INFO        VisSetUtil::addScrCols        Adding MODEL_DATA and CORRECTED_DATA column(s).
2023-12-28 08:19:40        INFO        VisSetUtil::initScrCols        Initializing MODEL_DATA to (unity).
2023-12-28 08:19:41        INFO        VisSetUtil::initScrCols        Initialized 328860 rows.
2023-12-28 08:19:41        INFO        Calibrater::        Initializing nominal selection to the whole MS.
2023-12-28 08:19:41        INFO        name::        No table opened.
2023-12-28 08:19:41        INFO        showcache::        The Table Cache has the following 16 entries:
2023-12-28 08:19:41        INFO        showcache::            0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms"
2023-12-28 08:19:41        INFO        showcache::            1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA"
2023-12-28 08:19:41        INFO        showcache::            2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION"
2023-12-28 08:19:41        INFO        showcache::            3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED"
2023-12-28 08:19:41        INFO        showcache::            4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD"
2023-12-28 08:19:41        INFO        showcache::            5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD"
2023-12-28 08:19:41        INFO        showcache::            6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY"
2023-12-28 08:19:41        INFO        showcache::            7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION"
2023-12-28 08:19:41        INFO        showcache::            8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING"
2023-12-28 08:19:41        INFO        showcache::            9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION"
2023-12-28 08:19:41        INFO        showcache::            10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR"
2023-12-28 08:19:41        INFO        showcache::            11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE"
2023-12-28 08:19:41        INFO        showcache::            12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW"
2023-12-28 08:19:41        INFO        showcache::            13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE"
2023-12-28 08:19:41        INFO        showcache::            14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL"
2023-12-28 08:19:41        INFO        showcache::            15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER"
2023-12-28 08:19:41        INFO        name::        No table opened.
2023-12-28 08:19:41        INFO        showcache::        The Table Cache is empty.
2023-12-28 08:19:41        WARN        calibrater::setvi(bool,bool)        Already using NEW VisibilityIterator.
2023-12-28 08:19:41        INFO        calibrater::open        ****Using NEW VI2-driven calibrater tool****
2023-12-28 08:19:41        INFO        calibrater::open        Opening MS: gaincaltest2.ms for calibration.
2023-12-28 08:19:41        INFO                Clearing all model records in MS header.
2023-12-28 08:19:41        INFO        VisSetUtil::addScrCols        Adding MODEL_DATA and CORRECTED_DATA column(s).
2023-12-28 08:19:43        INFO        VisSetUtil::initScrCols        Initializing MODEL_DATA to (unity).
2023-12-28 08:19:43        INFO        VisSetUtil::initScrCols        Initialized 328860 rows.
2023-12-28 08:19:43        INFO        Calibrater::        Initializing nominal selection to the whole MS.
2023-12-28 08:19:43        INFO        calibrater::setapply        Beginning setapply--(MSSelection version)-------
2023-12-28 08:19:43        INFO        Calibrater::setapply(type, applypar)        Arranging to APPLY:
2023-12-28 08:19:43        INFO        Calibrater::setapply(type, applypar)        .   G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2023-12-28 08:19:43        INFO        calibrater::correct        Beginning correct---------------------------
2023-12-28 08:19:43        INFO        Calibrater::correct2 (VI2/VB2)        The following calibration terms are arranged for apply:
2023-12-28 08:19:43        INFO        Calibrater::correct2 (VI2/VB2)        .   G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2023-12-28 08:19:46        INFO        calibrater::correct        Finished correcting.
2023-12-28 08:19:46        WARN        calibrater::setvi(bool,bool)        Already using NEW VisibilityIterator.
tar: work: Cannot stat: No such file or directory
tar: Exiting with failure status due to previous errors