fatal: Not a git repository (or any parent up to mount point /export/home/cbt-el7-11)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
Error response from daemon: No such container: wheel-container-test
Error response from daemon: No such container: wheel-container-test
2024-04-17 13:38:14        INFO        SVC[Tf Jones]::setSimulate()         Calculating corruption terms for simulated Tf Jones: output table=settrop_table simint=0.1s t=0.1
2024-04-17 13:38:15        INFO        SVC[Tf Jones]::setSimulate()         Writing calTable = settrop_table (Tf Jones)
2024-04-17 13:38:15        INFO                Writing solutions to table: settrop_table
2024-04-17 13:38:18        INFO        Simulator::corrupt()         Doing visibility corruption.
2024-04-17 13:38:18        INFO        Simulator::corrupt()         simulated Tf Jones: output table=settrop_table simint=0.1s t=0spwok = [1] in corrupt mode.
2024-04-17 13:38:19        INFO        Simulator::reset()         Resetting all visibility corruption components
2024-04-17 13:38:19        INFO        Simulator::reset()         Reset all image-plane corruption components
2024-04-17 13:38:22        INFO        NewMSSimulator::initAnt()         Using global coordinates for the antennas
2024-04-17 13:38:22        INFO        NewMSSimulator::initAnt()         Added rows to ANTENNA table
2024-04-17 13:38:22        INFO        MSsimulator::initFeeds()         Added rows to FEED table
2024-04-17 13:38:22        INFO        MSsimulator::initSpWindows()         Creating new spectral window LBand, ID 1
2024-04-17 13:38:22        INFO        simulator::settimes()        Times
2024-04-17 13:38:22        INFO        simulator::settimes()+             Integration time 2000s
2024-04-17 13:38:22        INFO        simulator::settimes()             Times will be interpreted as hour angles for first source
2024-04-17 13:38:22        INFO        NewMSSimulator::observe()        First source: fake @ 19:53:50.00   +40.06.00.00       J2000
2024-04-17 13:38:22        INFO        NewMSSimulator::observe()+        Full time range: 03-Oct-2019/21:16:01.8 -- 04-Oct-2019/07:16:01.8 TAI with int = 2000
2024-04-17 13:38:22        INFO        NewMSSimulator::observe()        Calculating a total of 18 integrations
2024-04-17 13:38:23        INFO        Simulator::reset()         Resetting all visibility corruption components
2024-04-17 13:38:23        INFO        Simulator::reset()         Reset all image-plane corruption components
2024-04-17 13:38:23        INFO        AgentFlagger::open        Table type is Measurement Set
2024-04-17 13:38:23        INFO        AgentFlagger::initAgents        There are initially 1 agents in the list. Agents: unflag
2024-04-17 13:38:23        INFO        AgentFlagger::initAgents        There are 1 valid agents in the list. Agents: unflag
2024-04-17 13:38:23        INFO        FlagMSHandler::        Chunk = 1 [progress: 100%], Observation = 0, Array = 0, Scan = 1, Field = 0 (fake), Spw = 0, Channels = 5, Corrs = [ RR LL ], Total Rows = 6318
2024-04-17 13:38:24        INFO        Unflag::chunkSummary        => Data unflagged so far 100% (63180/63180)
2024-04-17 13:38:24        INFO        FlagMSHandler::nextChunk         ====================================================================================
2024-04-17 13:38:24        INFO        Unflag::tableSummary        => Percentage of data un-flagged in table selection: 100%
2024-04-17 13:38:24        INFO        AgentFlagger::run        => Writing flags to the MS
2024-04-17 13:38:24        INFO        NewMSSimulator::NewMSSimulator(MeasurementSet& theMS)         Opening MeasurementSet /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/myms.ms with 6318 rows
2024-04-17 13:38:24        INFO        NewMSSimulator::NewMSSimulator(MeasurementSet& theMS)            last spectral window ID = 1
2024-04-17 13:38:24        INFO        Simulator::predict()         Predicting visibilities using model: [] and componentList: mycomplist.cl
2024-04-17 13:38:24        INFO        Simulator::predict()         The data column will be replaced
2024-04-17 13:38:24        INFO        Simulator::getVPRecord         Using default Voltage Patterns from the VPManager
2024-04-17 13:38:24        INFO        Simulator::getVPRecord         Temporary alert : The state of the vpmanager tool has been modified by loading these primary beam models. If any of your scripts rely on the vpmanager state being preserved throughout your CASA session, please use vp.saveastable() and vp.loadfromtable() as needed.
2024-04-17 13:38:24        INFO        Simulator::createSkyEquation()         Synthesis gridding
2024-04-17 13:38:24        INFO        Simulator::createSkyEquation()         Fourier transforms will use image centers as tangent points
2024-04-17 13:38:24        INFO        Simulator::reset()         Resetting all visibility corruption components
2024-04-17 13:38:24        INFO        Simulator::reset()         Reset all image-plane corruption components
2024-04-17 13:38:26        INFO        SubImageFactory::createImage        Creating image 'blahxx.im' of shape [1536, 1536, 1, 2]
2024-04-17 13:38:26        INFO        name::        No table opened.
2024-04-17 13:38:26        INFO        showcache::        The Table Cache is empty.
2024-04-17 13:38:26        INFO        name::        No table opened.
2024-04-17 13:38:26        INFO        showcache::        The Table Cache is empty.
2024-04-17 13:38:26        SEVERE        image::open (file src/tools/image/image_cmpt.cc, line 4208)        Exception Reported: Exception: File name is empty.
2024-04-17 13:38:26        SEVERE        image::open (file src/tools/image/image_cmpt.cc, line 4208)+        ... thrown by static void casa::ImageFactory::_checkInfile(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 371
2024-04-17 13:38:26        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2024-04-17 13:38:26        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-17 13:38:26        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2024-04-17 13:38:26        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2024-04-17 13:38:26        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-17 13:38:26        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2024-04-17 13:38:26        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2024-04-17 13:38:26        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-17 13:38:26        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2024-04-17 13:38:26        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-04-17 13:38:26        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-17 13:38:26        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-04-17 13:38:26        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2024-04-17 13:38:26        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-17 13:38:26        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2024-04-17 13:38:26        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2024-04-17 13:38:26        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-17 13:38:26        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2024-04-17 13:38:26        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-04-17 13:38:26        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-17 13:38:26        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-04-17 13:38:26        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2024-04-17 13:38:26        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-17 13:38:26        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2024-04-17 13:38:26        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Ambiguous axis specification. Both r and r match image axis name right ascension
2024-04-17 13:38:26        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-17 13:38:26        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Ambiguous axis specification. Both r and r match image axis name right ascension
2024-04-17 13:38:26        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-04-17 13:38:26        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-17 13:38:26        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-04-17 13:38:26        INFO        name::        No table opened.
2024-04-17 13:38:26        INFO        showcache::        The Table Cache is empty.
2024-04-17 13:38:26        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2024-04-17 13:38:26        INFO        ::::ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2024-04-17 13:38:26        INFO        ::::image::fromshape        Ran ia.fromshape
2024-04-17 13:38:26        INFO        ::::image::fromshape        ia.fromshape(outfile="", shape=[10,10,4,10], csys={...}, linear=false, overwrite=false, log=true, type="f")
2024-04-17 13:38:26        INFO        ::::image::transpose        Ran ia.transpose
2024-04-17 13:38:26        INFO        ::::image::transpose        ia.transpose(outfile="", order="3210")
2024-04-17 13:38:26        INFO        name::        No table opened.
2024-04-17 13:38:26        INFO        showcache::        The Table Cache is empty.
2024-04-17 13:38:26        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 20, 30] with float valued pixels.
2024-04-17 13:38:26        INFO        image::_casaQuantityFromVar         Will use values specified in major, minor, pa to set beam
2024-04-17 13:38:26        INFO        BeamManipulator::set        Setting (global) restoring beam.
2024-04-17 13:38:26        INFO        BeamManipulator::set        Beam parameters:  Major          : 4 arcmin
2024-04-17 13:38:26        INFO        BeamManipulator::set+          Minor          : 3 arcmin
2024-04-17 13:38:26        INFO        BeamManipulator::set+          Position Angle : 0 deg
2024-04-17 13:38:26        INFO        name::        No table opened.
2024-04-17 13:38:26        INFO        showcache::        The Table Cache is empty.
2024-04-17 13:38:27        INFO        SubImageFactory::createImage        Creating image 'straight_copy_0' of shape [5, 6, 7]
2024-04-17 13:38:27        INFO        SubImageFactory::createImage        Creating image 'straight_copy_1' of shape [5, 6, 7]
2024-04-17 13:38:28        INFO        SubImageFactory::createImage        Creating image 'straight_copy_2' of shape [5, 6, 7]
2024-04-17 13:38:28        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2024-04-17 13:38:29        INFO        SubImageFactory::createImage        Creating image 'straight_copy_3' of shape [5, 6, 7]
2024-04-17 13:38:29        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2024-04-17 13:38:29        INFO        name::        No table opened.
2024-04-17 13:38:29        INFO        showcache::        The Table Cache is empty.
2024-04-17 13:38:29        INFO        SubImageFactory::createImage        Creating image 'transpose_0' of shape [6, 7, 5]
2024-04-17 13:38:30        INFO        SubImageFactory::createImage        Creating image 'transpose_1' of shape [6, 7, 5]
2024-04-17 13:38:31        INFO        SubImageFactory::createImage        Creating image 'transpose_2' of shape [6, 7, 5]
2024-04-17 13:38:31        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2024-04-17 13:38:31        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2024-04-17 13:38:31        INFO        SubImageFactory::createImage        Creating image 'transpose_3' of shape [6, 7, 5]
2024-04-17 13:38:31        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2024-04-17 13:38:32        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2024-04-17 13:38:32        INFO        name::        No table opened.
2024-04-17 13:38:32        INFO        showcache::        The Table Cache is empty.
tar: work: Cannot stat: No such file or directory
tar: Exiting with failure status due to previous errors