(gnome-ssh-askpass:13984): Gtk-WARNING **: 12:50:49.073: cannot open display:
error: unable to read askpass response from '/usr/libexec/openssh/gnome-ssh-askpass'
fatal: could not read Username for 'https://open-bitbucket.nrao.edu': No such device or address
Error response from daemon: No such container: wheel-container-test
Error response from daemon: No such container: wheel-container-test
2024-06-14 17:04:40        INFO        MS2ASDM::writeFeed()        Filled Feed table uid://S002/X1/Xb with 16 rows ...
2024-06-14 17:04:40        INFO        MS2ASDM::writeDataDescription()        Filled DataDescription table uid://S002/X1/Xc with 1 rows ...
2024-06-14 17:04:40        INFO        MS2ASDM::writeSwitchCycle()        PHASE_ID column doesn't exist in MS Main table.
2024-06-14 17:04:40        INFO        MS2ASDM::writeSwitchCycle()+         Filled ASDM SwitchCycle table uid://S002/X1/Xd with one dummy entry.
2024-06-14 17:04:40        WARN        MS2ASDM::writeState()        MS State table is empty. Creating ASDM State table with one on-source entry.
2024-06-14 17:04:40        INFO        MS2ASDM::writeState()        Filled State table uid://S002/X1/Xe with 1 rows ...
2024-06-14 17:04:40        WARN        MS2ASDM::writeSysCal()        MS SysCal table doesn't exist or is empty. Creating ASDM SysCal table with default entries.
2024-06-14 17:04:40        INFO        MS2ASDM::writeSysCal()        Filled SysCal table uid://S002/X1/Xf with 16 rows ...
2024-06-14 17:04:40        WARN        MS2ASDM::writeConfigDesc()        MS Processor table is empty. Will assume processor type is CORRELATOR.
2024-06-14 17:04:40        WARN        MS2ASDM::writeConfigDesc()           Still, the MS Main table seems to refer to an existing processor id 0. Will try to proceed ...
2024-06-14 17:04:40        INFO        MS2ASDM::writeConfigDesc()        Processor Id: 0
2024-06-14 17:04:40        INFO        MS2ASDM::writeConfigDesc()        Filled ConfigDescription table uid://S002/X1/X10 with 1 rows ...
2024-06-14 17:04:40        INFO        MS2ASDM::writeSBSummaryAndExecBlockStubs()        Using tabulated observatory position for ALMA:
2024-06-14 17:04:40        INFO        MS2ASDM::writeSBSummaryAndExecBlockStubs()           Position: [1761.87, -4307.63, -1977.71] (WGS84)
2024-06-14 17:04:40        INFO        MS2ASDM::writeSBSummaryAndExecBlockStubs()        Filled SBSummary table uid://S002/X1/X35 with 36 rows ...
2024-06-14 17:04:40        INFO        MS2ASDM::writeSBSummaryAndExecBlockStubs()        Filled ExecBlock table uid://S002/X1/X36 with 36 rows ...
2024-06-14 17:04:40        INFO        MS2ASDM::writeMainAndScanAndSubScan()        Using column DATA.
2024-06-14 17:04:40        INFO        MS2ASDM::writeMainAndScanAndSubScan()        Filled Main table uid://S002/X1/X5b with 36 rows ...
2024-06-14 17:04:40        INFO        MS2ASDM::writeMainAndScanAndSubScan()        Filled Scan table uid://S002/X1/X5c with 36 rows ...
2024-06-14 17:04:40        INFO        MS2ASDM::writeMainAndScanAndSubScan()        Filled SubScan table uid://S002/X1/X5d with 36 rows ...
2024-06-14 17:04:40        INFO        MS2ASDM::writePointingModel()        Filled PointingModel table uid://S002/X1/X5e with 32 rows ...
2024-06-14 17:04:40        WARN        MS2ASDM::writePointing()        No ENCODER column in MS Pointing table. Will use DIRECTION instead.
2024-06-14 17:04:40        INFO        MS2ASDM::writePointing()        Filled Pointing table uid://S002/X1/X5f with 16 rows ...
xmllint: using libxml version 20907
   compiled with: Threads Tree Output Push Reader Patterns Writer SAXv1 FTP HTTP DTDValid HTML Legacy C14N Catalog XPath XPointer XInclude Iconv ISO8859X Unicode Regexps Automata Expr Schemas Schematron Modules Debug Zlib Lzma
2024-06-14 17:04:42        SEVERE                Exception Reported: Error in QuantumHolder::fromString with input string "bogus": Illegal input units or format
2024-06-14 17:04:42        SEVERE        +         in converting quantity
2024-06-14 17:04:42        SEVERE                Error in QuantumHolder::fromString with input string "blah": Illegal input units or format
2024-06-14 17:04:42        SEVERE        +         in converting quantity
2024-06-14 17:04:42        SEVERE                Exception Reported: Error in QuantumHolder::fromString with input string "blah": Illegal input units or format
2024-06-14 17:04:42        SEVERE        +         in converting quantity
2024-06-14 17:04:42        SEVERE                Error in QuantumHolder::fromString with input string "blah": Illegal input units or format
2024-06-14 17:04:42        SEVERE        +         in converting quantity
2024-06-14 17:04:42        SEVERE                Exception Reported: Error in QuantumHolder::fromString with input string "blah": Illegal input units or format
2024-06-14 17:04:42        SEVERE        +         in converting quantity
2024-06-14 17:04:42        SEVERE                Exception Reported: Unit::check Illegal unit string 'zz'
2024-06-14 17:04:42        SEVERE                Exception Reported: Unit::check Illegal unit string 'zz'
2024-06-14 17:04:43        INFO        SubImageFactory::createImage        Creating image 'blahxx.im' of shape [1536, 1536, 1, 2]
2024-06-14 17:04:43        INFO        name::        No table opened.
2024-06-14 17:04:43        INFO        showcache::        The Table Cache is empty.
2024-06-14 17:04:43        INFO        name::        No table opened.
2024-06-14 17:04:43        INFO        showcache::        The Table Cache is empty.
2024-06-14 17:04:43        SEVERE        image::open (file src/tools/image/image_cmpt.cc, line 4208)        Exception Reported: Exception: File name is empty.
2024-06-14 17:04:43        SEVERE        image::open (file src/tools/image/image_cmpt.cc, line 4208)+        ... thrown by static void casa::ImageFactory::_checkInfile(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 371
2024-06-14 17:04:43        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2024-06-14 17:04:43        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-06-14 17:04:43        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2024-06-14 17:04:44        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2024-06-14 17:04:44        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-06-14 17:04:44        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2024-06-14 17:04:44        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2024-06-14 17:04:44        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-06-14 17:04:44        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2024-06-14 17:04:44        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-06-14 17:04:44        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-06-14 17:04:44        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-06-14 17:04:44        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2024-06-14 17:04:44        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-06-14 17:04:44        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2024-06-14 17:04:44        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2024-06-14 17:04:44        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-06-14 17:04:44        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2024-06-14 17:04:44        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-06-14 17:04:44        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-06-14 17:04:44        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-06-14 17:04:44        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2024-06-14 17:04:44        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-06-14 17:04:44        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2024-06-14 17:04:44        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Ambiguous axis specification. Both r and r match image axis name right ascension
2024-06-14 17:04:44        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-06-14 17:04:44        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Ambiguous axis specification. Both r and r match image axis name right ascension
2024-06-14 17:04:44        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-06-14 17:04:44        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-06-14 17:04:44        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-06-14 17:04:44        INFO        name::        No table opened.
2024-06-14 17:04:44        INFO        showcache::        The Table Cache is empty.
2024-06-14 17:04:44        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2024-06-14 17:04:44        INFO        ::::ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2024-06-14 17:04:44        INFO        ::::image::fromshape        Ran ia.fromshape
2024-06-14 17:04:44        INFO        ::::image::fromshape        ia.fromshape(outfile="", shape=[10,10,4,10], csys={...}, linear=false, overwrite=false, log=true, type="f")
2024-06-14 17:04:44        INFO        ::::image::transpose        Ran ia.transpose
2024-06-14 17:04:44        INFO        ::::image::transpose        ia.transpose(outfile="", order="3210")
2024-06-14 17:04:44        INFO        name::        No table opened.
2024-06-14 17:04:44        INFO        showcache::        The Table Cache is empty.
2024-06-14 17:04:44        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 20, 30] with float valued pixels.
2024-06-14 17:04:44        INFO        image::_casaQuantityFromVar         Will use values specified in major, minor, pa to set beam
2024-06-14 17:04:44        INFO        BeamManipulator::set        Setting (global) restoring beam.
2024-06-14 17:04:44        INFO        BeamManipulator::set        Beam parameters:  Major          : 4 arcmin
2024-06-14 17:04:44        INFO        BeamManipulator::set+          Minor          : 3 arcmin
2024-06-14 17:04:44        INFO        BeamManipulator::set+          Position Angle : 0 deg
2024-06-14 17:04:44        INFO        name::        No table opened.
2024-06-14 17:04:44        INFO        showcache::        The Table Cache is empty.
2024-06-14 17:04:44        INFO        SubImageFactory::createImage        Creating image 'straight_copy_0' of shape [5, 6, 7]
2024-06-14 17:04:44        INFO        SubImageFactory::createImage        Creating image 'straight_copy_1' of shape [5, 6, 7]
2024-06-14 17:04:44        INFO        SubImageFactory::createImage        Creating image 'straight_copy_2' of shape [5, 6, 7]
2024-06-14 17:04:44        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2024-06-14 17:04:44        INFO        SubImageFactory::createImage        Creating image 'straight_copy_3' of shape [5, 6, 7]
2024-06-14 17:04:44        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2024-06-14 17:04:44        INFO        name::        No table opened.
2024-06-14 17:04:44        INFO        showcache::        The Table Cache is empty.
2024-06-14 17:04:44        INFO        SubImageFactory::createImage        Creating image 'transpose_0' of shape [6, 7, 5]
2024-06-14 17:04:44        INFO        SubImageFactory::createImage        Creating image 'transpose_1' of shape [6, 7, 5]
2024-06-14 17:04:44        INFO        SubImageFactory::createImage        Creating image 'transpose_2' of shape [6, 7, 5]
2024-06-14 17:04:44        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2024-06-14 17:04:44        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2024-06-14 17:04:44        INFO        SubImageFactory::createImage        Creating image 'transpose_3' of shape [6, 7, 5]
2024-06-14 17:04:44        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2024-06-14 17:04:44        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2024-06-14 17:04:44        INFO        name::        No table opened.
2024-06-14 17:04:44        INFO        showcache::        The Table Cache is empty.
tar: work: Cannot stat: No such file or directory
tar: Exiting with failure status due to previous errors