(gnome-ssh-askpass:22240): Gtk-WARNING **: 20:20:07.697: cannot open display:
error: unable to read askpass response from '/usr/libexec/openssh/gnome-ssh-askpass'
fatal: could not read Username for 'https://open-bitbucket.nrao.edu': No such device or address
Error response from daemon: No such container: wheel-container-test
Error response from daemon: No such container: wheel-container-test
2024-04-19 00:34:31        INFO        MSFitsInput::fillMSMainTable        Reading and writing 22653 visibility groups
2024-04-19 00:34:31        INFO        MSFitsInput::readRandomGroupUVFits        extname=AIPS FQ  nrows=1 ncols=5 rowsize=24 pcount=0 gcount=1
2024-04-19 00:34:31        INFO        MSFitsInput::readRandomGroupUVFits        extname=AIPS AN  nrows=28 ncols=13 rowsize=66 pcount=0 gcount=1
2024-04-19 00:34:31        INFO        MSFitsInput::readRandomGroupUVFits        extname=AIPS SU  nrows=3 ncols=19 rowsize=136 pcount=0 gcount=1
2024-04-19 00:34:31        INFO        MSFitsInput::fillExtraTables        Filling SOURCE table (this may take some time).
2024-04-19 00:34:31        INFO        ms::tofits        By selection 22653 rows to be converted are reduced to 4509
2024-04-19 00:34:31        INFO        MSFitsOutput::write         nchan=63 startchan=0 stepchan=1 avgchan=1
2024-04-19 00:34:31        INFO        MSFitsOutput::write        Converting MeasurementSet /home/casatest/casa6/casatestutils/nosedir/test_tool_ms/tab2100_1123 to FITS file 'testfile.fits'
2024-04-19 00:34:31        INFO        MSFitsOutput::_writeMain        Writing DATA column
2024-04-19 00:34:31        INFO        MSFitsOutput::_writeMain        Frequency reference frame is LSRK
2024-04-19 00:34:31        INFO        MSFitsOutput::write        Writing AIPS FQ table
2024-04-19 00:34:31        INFO        MSFitsOutput::writeFQ        Found 1 spectral windows
2024-04-19 00:34:31        INFO        MSFitsOutput::write        Writing AIPS AN table
2024-04-19 00:34:31        INFO        MSFitsOutput::writeAN        Using ITRF frame for antenna positions.
2024-04-19 00:34:31        INFO        MSFitsOutput::writeAN        Found 28 antennas in array #1
2024-04-19 00:34:32        INFO        MSFitsOutput::write         nchan=3 startchan=0 stepchan=1 avgchan=1
2024-04-19 00:34:32        INFO        MSFitsOutput::write        Converting MeasurementSet /opt/casa/data/casatestdata/unittest/mstool/uvfits_test.ms to FITS file 'xyz.uvfits'
2024-04-19 00:34:32        INFO        MSFitsOutput::_writeMain        CORRECTED_DATA does not exist, writing DATA
2024-04-19 00:34:32        INFO        MSFitsOutput::_writeMain        Frequency reference frame is LSRK
2024-04-19 00:34:32        INFO        MSFitsOutput::write        Writing AIPS FQ table
2024-04-19 00:34:32        INFO        MSFitsOutput::writeFQ        Found 2 spectral windows
2024-04-19 00:34:32        INFO        MSFitsOutput::write        Writing AIPS AN table
2024-04-19 00:34:32        INFO        MSFitsOutput::writeAN        Using ITRF frame for antenna positions.
2024-04-19 00:34:32        INFO        MSFitsOutput::writeAN        Found 8 antennas in array #1
2024-04-19 00:34:32        INFO        MSFitsInput::MSFitsInput        Converting FITS file 'xyz.uvfits' to MeasurementSet 'ke.ms'
2024-04-19 00:34:32        INFO        MSFitsInput::setupMeasurementSet        Using tile shape [1, 3, 43690] for SMA with obstype=0
2024-04-19 00:34:32        INFO        MSFitsInput::fillMSMainTableColWise        SOURCE not found in UU VV WW DATE DATE BASELINE FREQSEL
2024-04-19 00:34:32        INFO        MSFitsInput::fillMSMainTableColWise        Reading and writing 630 visibility groups
2024-04-19 00:34:32        INFO        MSFitsInput::readRandomGroupUVFits        extname=AIPS FQ  nrows=2 ncols=5 rowsize=24 pcount=0 gcount=1
2024-04-19 00:34:32        INFO        MSFitsInput::readRandomGroupUVFits        extname=AIPS AN  nrows=8 ncols=13 rowsize=66 pcount=0 gcount=1
2024-04-19 00:34:32        INFO        MSFitsInput::fillExtraTables        Filling SOURCE table (this may take some time).
2024-04-19 00:34:32        WARN        MSFitsInput::fillExtraTable        No systemic velocity for field 0
2024-04-19 00:34:32        WARN        MSFitsInput::fillExtraTable        No rest frequency for field 0
2024-04-19 00:34:32        WARN        MSFitsInput::fillExtraTable        No systemic velocity for field 0
2024-04-19 00:34:32        WARN        MSFitsInput::fillExtraTable        No rest frequency for field 0
2024-04-19 00:34:32        INFO        MSFitsInput::MSFitsInput        Converting FITS file '/opt/casa/data/casatestdata/unittest/mstool/1331+305_I.UVFITS' to MeasurementSet 'my.ms'
2024-04-19 00:34:32        SEVERE        ms::fromfits        Stokes I cannot be decomposed into proper correlation types without making assumptions. This functionality is not supported at File: /source/casa6/casatools/casacore/msfits/MSFits/MSFitsInput.cc, line: 744 at File: /source/casa6/casatools/casacore/msfits/MSFits/MSFitsInput.cc, line: 597
2024-04-19 00:34:33        INFO        SubImageFactory::createImage        Creating image 'blahxx.im' of shape [1536, 1536, 1, 2]
2024-04-19 00:34:33        INFO        name::        No table opened.
2024-04-19 00:34:33        INFO        showcache::        The Table Cache is empty.
2024-04-19 00:34:33        INFO        name::        No table opened.
2024-04-19 00:34:33        INFO        showcache::        The Table Cache is empty.
2024-04-19 00:34:33        SEVERE        image::open (file src/tools/image/image_cmpt.cc, line 4208)        Exception Reported: Exception: File name is empty.
2024-04-19 00:34:33        SEVERE        image::open (file src/tools/image/image_cmpt.cc, line 4208)+        ... thrown by static void casa::ImageFactory::_checkInfile(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 371
2024-04-19 00:34:33        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2024-04-19 00:34:33        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-19 00:34:33        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2024-04-19 00:34:33        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2024-04-19 00:34:33        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-19 00:34:33        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2024-04-19 00:34:33        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2024-04-19 00:34:33        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-19 00:34:33        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2024-04-19 00:34:33        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-04-19 00:34:33        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-19 00:34:33        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-04-19 00:34:33        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2024-04-19 00:34:33        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-19 00:34:33        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2024-04-19 00:34:33        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2024-04-19 00:34:33        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-19 00:34:33        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2024-04-19 00:34:33        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-04-19 00:34:33        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-19 00:34:33        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-04-19 00:34:33        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2024-04-19 00:34:33        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-19 00:34:33        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2024-04-19 00:34:33        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Ambiguous axis specification. Both r and r match image axis name right ascension
2024-04-19 00:34:33        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-19 00:34:33        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Ambiguous axis specification. Both r and r match image axis name right ascension
2024-04-19 00:34:33        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-04-19 00:34:33        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-04-19 00:34:33        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-04-19 00:34:33        INFO        name::        No table opened.
2024-04-19 00:34:33        INFO        showcache::        The Table Cache is empty.
2024-04-19 00:34:33        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2024-04-19 00:34:33        INFO        ::::ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2024-04-19 00:34:33        INFO        ::::image::fromshape        Ran ia.fromshape
2024-04-19 00:34:33        INFO        ::::image::fromshape        ia.fromshape(outfile="", shape=[10,10,4,10], csys={...}, linear=false, overwrite=false, log=true, type="f")
2024-04-19 00:34:33        INFO        ::::image::transpose        Ran ia.transpose
2024-04-19 00:34:33        INFO        ::::image::transpose        ia.transpose(outfile="", order="3210")
2024-04-19 00:34:33        INFO        name::        No table opened.
2024-04-19 00:34:33        INFO        showcache::        The Table Cache is empty.
2024-04-19 00:34:33        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 20, 30] with float valued pixels.
2024-04-19 00:34:33        INFO        image::_casaQuantityFromVar         Will use values specified in major, minor, pa to set beam
2024-04-19 00:34:33        INFO        BeamManipulator::set        Setting (global) restoring beam.
2024-04-19 00:34:33        INFO        BeamManipulator::set        Beam parameters:  Major          : 4 arcmin
2024-04-19 00:34:33        INFO        BeamManipulator::set+          Minor          : 3 arcmin
2024-04-19 00:34:33        INFO        BeamManipulator::set+          Position Angle : 0 deg
2024-04-19 00:34:33        INFO        name::        No table opened.
2024-04-19 00:34:33        INFO        showcache::        The Table Cache is empty.
2024-04-19 00:34:33        INFO        SubImageFactory::createImage        Creating image 'straight_copy_0' of shape [5, 6, 7]
2024-04-19 00:34:33        INFO        SubImageFactory::createImage        Creating image 'straight_copy_1' of shape [5, 6, 7]
2024-04-19 00:34:33        INFO        SubImageFactory::createImage        Creating image 'straight_copy_2' of shape [5, 6, 7]
2024-04-19 00:34:33        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2024-04-19 00:34:33        INFO        SubImageFactory::createImage        Creating image 'straight_copy_3' of shape [5, 6, 7]
2024-04-19 00:34:33        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2024-04-19 00:34:33        INFO        name::        No table opened.
2024-04-19 00:34:33        INFO        showcache::        The Table Cache is empty.
2024-04-19 00:34:33        INFO        SubImageFactory::createImage        Creating image 'transpose_0' of shape [6, 7, 5]
2024-04-19 00:34:33        INFO        SubImageFactory::createImage        Creating image 'transpose_1' of shape [6, 7, 5]
2024-04-19 00:34:33        INFO        SubImageFactory::createImage        Creating image 'transpose_2' of shape [6, 7, 5]
2024-04-19 00:34:33        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2024-04-19 00:34:33        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2024-04-19 00:34:33        INFO        SubImageFactory::createImage        Creating image 'transpose_3' of shape [6, 7, 5]
2024-04-19 00:34:33        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2024-04-19 00:34:34        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2024-04-19 00:34:34        INFO        name::        No table opened.
2024-04-19 00:34:34        INFO        showcache::        The Table Cache is empty.
tar: work: Cannot stat: No such file or directory
tar: Exiting with failure status due to previous errors