From https://open-bitbucket.nrao.edu/scm/casa/casa-data
   7e86580..a2805e8  master     -> origin/master
Downloading geodetic/IERSpredict/table.dat (3.3 KB)
Downloading geodetic/IERSpredict/table.f0 (197 KB)
Downloading geodetic/IERSpredict/table.lock (325 B)

(gnome-ssh-askpass:28199): Gtk-WARNING **: 16:17:06.146: cannot open display:
error: unable to read askpass response from '/usr/libexec/openssh/gnome-ssh-askpass'
fatal: could not read Username for 'https://open-bitbucket.nrao.edu': No such device or address
Error response from daemon: No such container: wheel-container-test
Error response from daemon: No such container: wheel-container-test
2024-03-15 20:32:57        INFO        ImageRegion::fromRecord        Selected bounding box :
2024-03-15 20:32:57        INFO        ImageRegion::fromRecord+            [2, 4, 0] to [7, 6, 9]  (00:00:12.000, -00.01.00.000, 1.415e+09Hz to 23:59:52.000, +00.01.00.000, 1.415e+09Hz)
2024-03-15 20:32:57        INFO        SubImageFactory::createImage        Creating image 'test_pv_1_3' of shape [6, 10]
2024-03-15 20:32:57        INFO        PVGenerator::setWidth         Rounding width up to next odd number of pixels (3), or 180000marcsec
2024-03-15 20:32:57        INFO        PVGenerator::generate         Rotation angle (very nearly) 0 degrees, no rotation required
2024-03-15 20:32:57        INFO        ImageRegion::fromRecord        Selected bounding box :
2024-03-15 20:32:57        INFO        ImageRegion::fromRecord+            [2, 4, 0] to [7, 6, 9]  (00:00:12.000, -00.01.00.000, 1.415e+09Hz to 23:59:52.000, +00.01.00.000, 1.415e+09Hz)
2024-03-15 20:32:57        INFO        SubImageFactory::createImage        Creating image 'test_pv_1_4' of shape [6, 10]
2024-03-15 20:32:57        INFO        name::        No table opened.
2024-03-15 20:32:57        INFO        showcache::        The Table Cache is empty.
2024-03-15 20:32:57        INFO        ImageFactory::createImage        Created Temp image  of shape [50, 50, 1000] with float valued pixels.
2024-03-15 20:32:57        INFO        PVGenerator::generate         Rotating image by -45 degrees about direction coordinate pixel (7.5, 7.5) to align specified slice with the x axis
2024-03-15 20:32:57        INFO        ImageRegion::fromRecord        Selected bounding box :
2024-03-15 20:32:57        INFO        ImageRegion::fromRecord+            [0, 0, 0] to [49, 49, 999]  (03:01:57.530, -35.32.49.013, 1.4145e+09Hz to 02:57:58.673, -34.43.38.701, 1.4155e+09Hz)
2024-03-15 20:32:57        INFO        ImageRegion::fromRecord        Rotating DirectionCoordinate holding axes [0, 1]
2024-03-15 20:32:57        INFO        CasacRegionManager::fromBCS        No directional region specified. Using full positional plane.
2024-03-15 20:32:57        INFO        CasacRegionManager::fromBCS        Using all spectral channels.
2024-03-15 20:32:57        INFO        ImageMaskAttacher::makeMask        Created and initialized mask `mask0'
2024-03-15 20:32:57        INFO        ImageMaskAttacher::makeMask        Created mask `mask0'
2024-03-15 20:32:57        INFO        ImageRegion::fromRecord        Selected bounding box :
2024-03-15 20:32:57        INFO        ImageRegion::fromRecord+            [4, 7, 0] to [11, 7, 999]  (03:01:31.077, -35.28.09.040, 1.4145e+09Hz to 03:01:06.781, -35.23.12.033, 1.4155e+09Hz)
2024-03-15 20:32:57        INFO        ImageCollapser::_doDegenerateAxesCase        All subimage axes to be collapsed are degenerate, using algorithm optimized for that case.
2024-03-15 20:32:57        INFO        name::        No table opened.
2024-03-15 20:32:57        INFO        showcache::        The Table Cache is empty.
2024-03-15 20:32:57        INFO        ImageFactory::createImage        Created Paged image 'maskim' of shape [200, 200, 1, 1] with float valued pixels.
2024-03-15 20:32:57        INFO        ImageFactory::createImage        Created Paged image 'kk' of shape [200, 200, 1, 20] with float valued pixels.
2024-03-15 20:32:57        SEVERE        image::pv (file src/tools/image/image_cmpt.cc, line 4856)        Exception Reported: The input image shape ([200, 200, 1, 20]) and mask shape ([200, 200, 1, 1]) are different, and it was specified that the mask should not be extended, so the mask cannot be applied to the (sub)image. Specifying that the mask should be extended may resolve the issue at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 306
2024-03-15 20:32:57        INFO        PVGenerator::generate         Rotation angle (very nearly) 0 degrees, no rotation required
2024-03-15 20:32:57        INFO        ImageRegion::fromRecord        Selected bounding box :
2024-03-15 20:32:57        INFO        ImageRegion::fromRecord+            [2, 2, 0, 0] to [20, 2, 0, 19]  (00:06:32.213, -01.38.00.797, I, 1.41499e+09Hz to 00:05:20.159, -01.38.00.797, I, 1.41501e+09Hz)
2024-03-15 20:32:57        INFO        ImageCollapser::_doDegenerateAxesCase        All subimage axes to be collapsed are degenerate, using algorithm optimized for that case.
2024-03-15 20:32:57        INFO        CasacRegionManager::fromBCS        No directional region specified. Using full positional plane.
2024-03-15 20:32:57        INFO        CasacRegionManager::fromBCS        Using all spectral channels.
2024-03-15 20:32:57        INFO        CasacRegionManager::fromBCS        Using polarizations ALL
2024-03-15 20:32:57        INFO        ImageMaskAttacher::makeMask        Created mask `mask0'
2024-03-15 20:32:57        INFO        name::        No table opened.
2024-03-15 20:32:57        INFO        showcache::        The Table Cache is empty.
2024-03-15 20:32:59        INFO        SubImageFactory::createImage        Creating image 'blahxx.im' of shape [1536, 1536, 1, 2]
2024-03-15 20:32:59        INFO        name::        No table opened.
2024-03-15 20:32:59        INFO        showcache::        The Table Cache is empty.
2024-03-15 20:32:59        INFO        name::        No table opened.
2024-03-15 20:32:59        INFO        showcache::        The Table Cache is empty.
2024-03-15 20:32:59        SEVERE        image::open (file src/tools/image/image_cmpt.cc, line 4208)        Exception Reported: Exception: File name is empty.
2024-03-15 20:32:59        SEVERE        image::open (file src/tools/image/image_cmpt.cc, line 4208)+        ... thrown by static void casa::ImageFactory::_checkInfile(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 371
2024-03-15 20:32:59        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2024-03-15 20:32:59        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-03-15 20:32:59        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2024-03-15 20:32:59        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2024-03-15 20:32:59        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-03-15 20:32:59        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2024-03-15 20:32:59        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2024-03-15 20:32:59        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-03-15 20:32:59        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2024-03-15 20:32:59        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-03-15 20:32:59        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-03-15 20:32:59        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-03-15 20:32:59        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2024-03-15 20:32:59        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-03-15 20:32:59        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2024-03-15 20:32:59        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2024-03-15 20:32:59        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-03-15 20:32:59        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2024-03-15 20:32:59        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-03-15 20:32:59        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-03-15 20:32:59        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-03-15 20:32:59        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2024-03-15 20:32:59        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-03-15 20:32:59        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2024-03-15 20:32:59        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Ambiguous axis specification. Both r and r match image axis name right ascension
2024-03-15 20:32:59        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-03-15 20:32:59        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Ambiguous axis specification. Both r and r match image axis name right ascension
2024-03-15 20:32:59        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-03-15 20:32:59        SEVERE        image::transpose (file src/tools/image/image_cmpt.cc, line 6478)        Exception Reported: 2024-03-15 20:32:59        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2024-03-15 20:32:59        INFO        name::        No table opened.
2024-03-15 20:32:59        INFO        showcache::        The Table Cache is empty.
2024-03-15 20:32:59        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2024-03-15 20:32:59        INFO        ::::ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2024-03-15 20:32:59        INFO        ::::image::fromshape        Ran ia.fromshape
2024-03-15 20:32:59        INFO        ::::image::fromshape        ia.fromshape(outfile="", shape=[10,10,4,10], csys={...}, linear=false, overwrite=false, log=true, type="f")
2024-03-15 20:32:59        INFO        ::::image::transpose        Ran ia.transpose
2024-03-15 20:32:59        INFO        ::::image::transpose        ia.transpose(outfile="", order="3210")
2024-03-15 20:32:59        INFO        name::        No table opened.
2024-03-15 20:32:59        INFO        showcache::        The Table Cache is empty.
2024-03-15 20:32:59        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 20, 30] with float valued pixels.
2024-03-15 20:32:59        INFO        image::_casaQuantityFromVar         Will use values specified in major, minor, pa to set beam
2024-03-15 20:32:59        INFO        BeamManipulator::set        Setting (global) restoring beam.
2024-03-15 20:32:59        INFO        BeamManipulator::set        Beam parameters:  Major          : 4 arcmin
2024-03-15 20:32:59        INFO        BeamManipulator::set+          Minor          : 3 arcmin
2024-03-15 20:32:59        INFO        BeamManipulator::set+          Position Angle : 0 deg
2024-03-15 20:32:59        INFO        name::        No table opened.
2024-03-15 20:32:59        INFO        showcache::        The Table Cache is empty.
2024-03-15 20:32:59        INFO        SubImageFactory::createImage        Creating image 'straight_copy_0' of shape [5, 6, 7]
2024-03-15 20:32:59        INFO        SubImageFactory::createImage        Creating image 'straight_copy_1' of shape [5, 6, 7]
2024-03-15 20:32:59        INFO        SubImageFactory::createImage        Creating image 'straight_copy_2' of shape [5, 6, 7]
2024-03-15 20:32:59        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2024-03-15 20:32:59        INFO        SubImageFactory::createImage        Creating image 'straight_copy_3' of shape [5, 6, 7]
2024-03-15 20:32:59        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2024-03-15 20:32:59        INFO        name::        No table opened.
2024-03-15 20:32:59        INFO        showcache::        The Table Cache is empty.
2024-03-15 20:32:59        INFO        SubImageFactory::createImage        Creating image 'transpose_0' of shape [6, 7, 5]
2024-03-15 20:32:59        INFO        SubImageFactory::createImage        Creating image 'transpose_1' of shape [6, 7, 5]
2024-03-15 20:32:59        INFO        SubImageFactory::createImage        Creating image 'transpose_2' of shape [6, 7, 5]
2024-03-15 20:32:59        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2024-03-15 20:32:59        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2024-03-15 20:32:59        INFO        SubImageFactory::createImage        Creating image 'transpose_3' of shape [6, 7, 5]
2024-03-15 20:32:59        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2024-03-15 20:32:59        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2024-03-15 20:32:59        INFO        name::        No table opened.
2024-03-15 20:32:59        INFO        showcache::        The Table Cache is empty.
tar: work: Cannot stat: No such file or directory
tar: Exiting with failure status due to previous errors