Build: #1 was successful
Job: Test Tools Many Linux 2.28 was successful
Build log
The build generated 52,855 lines of output.The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
| 04-Mar-2024 12:13:20 | 2024-03-04 17:13:20 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
| 04-Mar-2024 12:13:20 | 2024-03-04 17:13:20 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
| 04-Mar-2024 12:13:20 | 2024-03-04 17:13:20 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
| 04-Mar-2024 12:13:20 | 2024-03-04 17:13:20 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
| 04-Mar-2024 12:13:20 | 2024-03-04 17:13:20 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
| 04-Mar-2024 12:13:20 | 2024-03-04 17:13:20 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 04-Mar-2024 12:13:20 | 2024-03-04 17:13:20 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0750931/0.0978998/0.125897 |
| 04-Mar-2024 12:13:20 | 2024-03-04 17:13:20 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 04-Mar-2024 12:13:20 | 2024-03-04 17:13:21 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.72932/3.98787/5.33715 |
| 04-Mar-2024 12:13:20 | 2024-03-04 17:13:21 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
| 04-Mar-2024 12:13:20 | 2024-03-04 17:13:21 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0658572/0.0972125/0.140794 |
| 04-Mar-2024 12:13:20 | 2024-03-04 17:13:21 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
| 04-Mar-2024 12:13:20 | 2024-03-04 17:13:21 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.97943/3.97841/5.72903 |
| 04-Mar-2024 12:13:20 | 2024-03-04 17:13:21 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
| 04-Mar-2024 12:13:20 | 2024-03-04 17:13:21 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
| 04-Mar-2024 12:13:20 | 2024-03-04 17:13:21 INFO Calibrater::solve Found good BPOLY solutions in 7 slots. |
| 04-Mar-2024 12:13:20 | 2024-03-04 17:13:21 INFO calibrater::solve Finished solving. |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:21 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 04-Mar-2024 12:13:21 | test_tool_calibrater.py::calibrater_test::test_solveBandpass |
| 04-Mar-2024 12:13:21 | Check that solve band poly creates the output table |
| 04-Mar-2024 12:13:21 | PASSED |
| 04-Mar-2024 12:13:21 | |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:21 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:21 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:21 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:21 INFO Clearing all model records in MS header. |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:21 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:22 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:22 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:22 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:22 INFO calibrater::setsolvegainspline Beginning setsolvegainspline--(MSSelection version)------- |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:22 INFO Calibrater::setsolvegainspline Arranging to SOLVE: |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:22 INFO Calibrater::setsolvegainspline . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:22 INFO calibrater::solve Beginning solve----------------------------- |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:22 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:22 INFO Calibrater::solve . (None) |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:22 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:22 INFO Calibrater::solve . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:22 INFO GJonesSpline::solve() Fitting time-dependent cubic splines. |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:22 INFO GJonesSpline::solve() Solving for phase splines with splinetime= 10800 |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:22 INFO GJonesSpline::solve() Solving for amplitude splines with splinetime= 10800 |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:22 INFO GJonesSpline::solve() Accumulating data for: field= 1331+30500002_0, spw= 0, nchan= 63 |
| 04-Mar-2024 12:13:21 | 2024-03-04 17:13:22 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63 |
| 04-Mar-2024 12:13:22 | 2024-03-04 17:13:22 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63 |
| 04-Mar-2024 12:13:22 | 2024-03-04 17:13:22 INFO GJonesSpline::solve() Number of timestamps in data = 60 |
| 04-Mar-2024 12:13:22 | 2024-03-04 17:13:22 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec. |
| 04-Mar-2024 12:13:22 | 2024-03-04 17:13:22 INFO GJonesSpline::solve() Number of cubic spline control points = 4 |
| 04-Mar-2024 12:13:22 | 2024-03-04 17:13:22 INFO GJonesSpline::solve() Number of cubic spline knots = 8 |
| 04-Mar-2024 12:13:22 | 2024-03-04 17:13:22 INFO GJonesSpline::solve() Number of cubic spline segments = 1 |
| 04-Mar-2024 12:13:22 | 2024-03-04 17:13:22 INFO GJonesSpline::solve() Fitting amplitude spline. |
| 04-Mar-2024 12:13:22 | test_tool_calibrater.py::calibrater_test::test_solveGainspline DPBTRF ;problem leading minor 23 |
| 04-Mar-2024 12:13:22 | DPBTRF ;problem leading minor 23 |
| 04-Mar-2024 12:13:22 | 2024-03-04 17:13:22 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline. |
| 04-Mar-2024 12:13:22 | 2024-03-04 17:13:22 INFO GJonesSpline::solve() Fitting phase spline. |
| 04-Mar-2024 12:13:22 | DPBTRF ;problem leading minor 22 |
| 04-Mar-2024 12:13:22 | DPBTRF ;problem leading minor 22 |
| 04-Mar-2024 12:13:22 | 2024-03-04 17:13:22 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline |
| 04-Mar-2024 12:13:22 | 2024-03-04 17:13:23 INFO calibrater::solve Finished solving. |
| 04-Mar-2024 12:13:22 | 2024-03-04 17:13:23 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 04-Mar-2024 12:13:22 | |
| 04-Mar-2024 12:13:22 | Check that solve gain spline creates the output table |
| 04-Mar-2024 12:13:22 | PASSED |
| 04-Mar-2024 12:13:22 | |
| 04-Mar-2024 12:13:23 | 2024-03-04 17:13:23 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 04-Mar-2024 12:13:23 | 2024-03-04 17:13:23 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 04-Mar-2024 12:13:23 | 2024-03-04 17:13:23 INFO Clearing all model records in MS header. |
| 04-Mar-2024 12:13:23 | 2024-03-04 17:13:23 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Mar-2024 12:13:24 | 2024-03-04 17:13:25 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Mar-2024 12:13:24 | 2024-03-04 17:13:25 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 04-Mar-2024 12:13:24 | 2024-03-04 17:13:25 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Mar-2024 12:13:24 | 2024-03-04 17:13:25 INFO calibrater::specifycal Beginning specifycal----------------------- |
| 04-Mar-2024 12:13:24 | 2024-03-04 17:13:25 INFO Creating G Jones table from specified parameters. |
| 04-Mar-2024 12:13:24 | 2024-03-04 17:13:25 INFO Generating 'G' corrections. |
| 04-Mar-2024 12:13:24 | 2024-03-04 17:13:25 INFO Specified parameter(s) (per spw and pol) repeated on all antennas. |
| 04-Mar-2024 12:13:24 | 2024-03-04 17:13:25 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations. |
| 04-Mar-2024 12:13:24 | 2024-03-04 17:13:25 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9]) |
| 04-Mar-2024 12:13:24 | 2024-03-04 17:13:25 INFO Writing solutions to table: testcalout.cal |
| 04-Mar-2024 12:13:26 | 2024-03-04 17:13:26 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 04-Mar-2024 12:13:26 | test_tool_calibrater.py::calibrater_test::test_specifyCal |
| 04-Mar-2024 12:13:26 | Check that specifycal can set values for specific spws and antennas |
| 04-Mar-2024 12:13:26 | PASSED |
| 04-Mar-2024 12:13:26 | |
| 04-Mar-2024 12:13:26 | 2024-03-04 17:13:27 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
| 04-Mar-2024 12:13:26 | 2024-03-04 17:13:27 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
| 04-Mar-2024 12:13:26 | 2024-03-04 17:13:27 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 04-Mar-2024 12:13:26 | 2024-03-04 17:13:27 INFO Clearing all model records in MS header. |
| 04-Mar-2024 12:13:27 | 2024-03-04 17:13:27 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Mar-2024 12:13:28 | 2024-03-04 17:13:28 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Mar-2024 12:13:28 | 2024-03-04 17:13:29 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 04-Mar-2024 12:13:28 | 2024-03-04 17:13:29 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Mar-2024 12:13:29 | 2024-03-04 17:13:29 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 04-Mar-2024 12:13:29 | 2024-03-04 17:13:29 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 04-Mar-2024 12:13:29 | 2024-03-04 17:13:29 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Mar-2024 12:13:29 | 2024-03-04 17:13:29 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
| 04-Mar-2024 12:13:29 | 2024-03-04 17:13:29 INFO Calibrater::setsolve Arranging to SOLVE: |
| 04-Mar-2024 12:13:29 | 2024-03-04 17:13:29 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 04-Mar-2024 12:13:29 | 2024-03-04 17:13:29 INFO Calibrater::state The following calibration terms are arranged for apply: |
| 04-Mar-2024 12:13:29 | 2024-03-04 17:13:29 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Mar-2024 12:13:29 | 2024-03-04 17:13:29 INFO Calibrater::state The following calibration term is arranged for solve: |
| 04-Mar-2024 12:13:29 | 2024-03-04 17:13:29 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 04-Mar-2024 12:13:29 | 2024-03-04 17:13:29 INFO calibrater::solve Beginning solve----------------------------- |
| 04-Mar-2024 12:13:29 | 2024-03-04 17:13:29 INFO Calibrater::solve The following calibration terms are arranged for apply: |
| 04-Mar-2024 12:13:29 | 2024-03-04 17:13:29 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Mar-2024 12:13:29 | 2024-03-04 17:13:29 INFO Calibrater::solve The following calibration term is arranged for solve: |
| 04-Mar-2024 12:13:29 | 2024-03-04 17:13:29 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
| 04-Mar-2024 12:13:29 | 2024-03-04 17:13:29 INFO Solving for Mf Mueller |
| 04-Mar-2024 12:13:29 | 2024-03-04 17:13:29 INFO For solint = inf, found 84 solution intervals. |
| 04-Mar-2024 12:13:30 | 2024-03-04 17:13:31 INFO Found good Mf Mueller solutions in 84 intervals. |
| 04-Mar-2024 12:13:30 | 2024-03-04 17:13:31 INFO Writing solutions to table: output.ms |
| 04-Mar-2024 12:13:32 | 2024-03-04 17:13:32 INFO calibrater::solve Finished solving. |
| 04-Mar-2024 12:13:32 | 2024-03-04 17:13:33 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
| 04-Mar-2024 12:13:32 | test_tool_calibrater.py::calibrater_test::test_standardPath |
| 04-Mar-2024 12:13:32 | open setapply setsolve state solve close |
| 04-Mar-2024 12:13:32 | PASSED |
| 04-Mar-2024 12:13:32 | |
| 04-Mar-2024 12:13:32 | 2024-03-04 17:13:33 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 04-Mar-2024 12:13:32 | 2024-03-04 17:13:33 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 04-Mar-2024 12:13:32 | 2024-03-04 17:13:33 INFO Clearing all model records in MS header. |
| 04-Mar-2024 12:13:33 | 2024-03-04 17:13:33 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO name:: No table opened. |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO showcache:: The Table Cache has the following 16 entries: |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
| 04-Mar-2024 12:13:34 | 2024-03-04 17:13:35 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
| 04-Mar-2024 12:13:35 | 2024-03-04 17:13:35 INFO name:: No table opened. |
| 04-Mar-2024 12:13:35 | 2024-03-04 17:13:35 INFO showcache:: The Table Cache is empty. |
| 04-Mar-2024 12:13:35 | 2024-03-04 17:13:35 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 04-Mar-2024 12:13:35 | test_tool_calibrater.py::calibrater_test::test_takesMs |
| 04-Mar-2024 12:13:35 | Check that the calibrater tool can open and close an MS |
| 04-Mar-2024 12:13:35 | PASSED |
| 04-Mar-2024 12:13:35 | |
| 04-Mar-2024 12:13:35 | 2024-03-04 17:13:35 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
| 04-Mar-2024 12:13:35 | 2024-03-04 17:13:35 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
| 04-Mar-2024 12:13:35 | 2024-03-04 17:13:35 INFO Clearing all model records in MS header. |
| 04-Mar-2024 12:13:35 | 2024-03-04 17:13:36 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
| 04-Mar-2024 12:13:36 | 2024-03-04 17:13:37 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
| 04-Mar-2024 12:13:37 | 2024-03-04 17:13:37 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
| 04-Mar-2024 12:13:37 | 2024-03-04 17:13:37 INFO Calibrater:: Initializing nominal selection to the whole MS. |
| 04-Mar-2024 12:13:37 | 2024-03-04 17:13:37 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
| 04-Mar-2024 12:13:37 | 2024-03-04 17:13:37 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
| 04-Mar-2024 12:13:37 | 2024-03-04 17:13:38 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Mar-2024 12:13:37 | 2024-03-04 17:13:38 INFO calibrater::correct Beginning correct--------------------------- |
| 04-Mar-2024 12:13:37 | 2024-03-04 17:13:38 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
| 04-Mar-2024 12:13:37 | 2024-03-04 17:13:38 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
| 04-Mar-2024 12:13:40 | 2024-03-04 17:13:40 INFO calibrater::correct Finished correcting. |
| 04-Mar-2024 12:13:40 | 2024-03-04 17:13:40 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
| 04-Mar-2024 12:13:40 | test_tool_calibrater.py::calibrater_test::test_writeToCorrected |
| 04-Mar-2024 12:13:40 | Check that the tool writes to the CORRECTED_DATA column |
| 04-Mar-2024 12:13:40 | PASSED |
| 04-Mar-2024 12:13:40 | |
| 04-Mar-2024 12:13:40 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml - |
| 04-Mar-2024 12:13:40 | ================== 24 passed, 1 warning in 121.02s (0:02:01) =================== |
| 04-Mar-2024 12:13:40 | ============================= test session starts ============================== |
| 04-Mar-2024 12:13:40 | platform linux -- Python 3.8.7, pytest-8.0.2, pluggy-1.4.0 -- /home/casatest/venv/bin/python3.8 |
| 04-Mar-2024 12:13:40 | cachedir: .pytest_cache |
| 04-Mar-2024 12:13:40 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner |
| 04-Mar-2024 12:13:40 | configfile: pytest.ini |
| 04-Mar-2024 12:13:41 | collecting ... collected 1 item |
| 04-Mar-2024 12:13:41 | |
| 04-Mar-2024 12:13:41 | |
| 04-Mar-2024 12:13:46 | test_tool_msuvbinner.py::msuvbinnerTest::test_fill_1ms |
| 04-Mar-2024 12:13:46 | test uvgridding 1 ms onto an output grid |
| 04-Mar-2024 12:13:46 | PASSED |
| 04-Mar-2024 12:13:46 | |
| 04-Mar-2024 12:13:46 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msuvbinner/nose.xml - |
| 04-Mar-2024 12:13:46 | ========================= 1 passed, 1 warning in 5.82s ========================= |
| 04-Mar-2024 12:13:47 | ============================= test session starts ============================== |
| 04-Mar-2024 12:13:47 | platform linux -- Python 3.8.7, pytest-8.0.2, pluggy-1.4.0 -- /home/casatest/venv/bin/python3.8 |
| 04-Mar-2024 12:13:47 | cachedir: .pytest_cache |
| 04-Mar-2024 12:13:47 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol |
| 04-Mar-2024 12:13:47 | configfile: pytest.ini |
| 04-Mar-2024 12:13:47 | collecting ... collected 17 items |
| 04-Mar-2024 12:13:47 | |
| 04-Mar-2024 12:13:47 | |
| 04-Mar-2024 12:13:47 | 2024-03-04 17:13:48 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:47 | 2024-03-04 17:13:48 INFO imagepol::complexFractionalLinearPolarization(...) Creating image 'g' of shape [10, 10, 10, 1] |
| 04-Mar-2024 12:13:47 | 2024-03-04 17:13:48 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:48 | 2024-03-04 17:13:48 INFO imagepol::complexFractionalLinearPolarization(...) Creating image 'hh' of shape [10, 10, 10, 1] |
| 04-Mar-2024 12:13:48 | 2024-03-04 17:13:48 SEVERE imagepol::complexfraclinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 04-Mar-2024 12:13:48 | 2024-03-04 17:13:48 SEVERE imagepol::complexfraclinpol+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
| 04-Mar-2024 12:13:48 | test_tool_imagepol.py::po_complexfraclinpol_test::test_multibeam |
| 04-Mar-2024 12:13:48 | Test multibeam images for correct behavior |
| 04-Mar-2024 12:13:48 | pol_eq_beams.fits |
| 04-Mar-2024 12:13:48 | PASSED |
| 04-Mar-2024 12:13:48 | |
| 04-Mar-2024 12:13:48 | 2024-03-04 17:13:48 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:48 | 2024-03-04 17:13:49 INFO ImagePolProxy::complexlinpol Creating image 'g' of shape [10, 10, 10, 1] |
| 04-Mar-2024 12:13:48 | 2024-03-04 17:13:49 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:48 | 2024-03-04 17:13:49 INFO ImagePolProxy::complexlinpol Creating image 'hh' of shape [10, 10, 10, 1] |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 SEVERE imagepol::complexlinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 SEVERE imagepol::complexlinpol+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO name:: No table opened. |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO showcache:: The Table Cache is empty. |
| 04-Mar-2024 12:13:49 | test_tool_imagepol.py::po_complexlinpol_test::test_multibeam |
| 04-Mar-2024 12:13:49 | Test multibeam images for correct behavior |
| 04-Mar-2024 12:13:49 | PASSED |
| 04-Mar-2024 12:13:49 | |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 SEVERE imagepol::depolratio Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 SEVERE imagepol::depolratio+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 SEVERE imagepol::depolratio Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 SEVERE imagepol::depolratio+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
| 04-Mar-2024 12:13:49 | test_tool_imagepol.py::po_depolratio_test::test_multibeam |
| 04-Mar-2024 12:13:49 | Test multibeam images for correct behavior |
| 04-Mar-2024 12:13:49 | pol_eq_beams.fits |
| 04-Mar-2024 12:13:49 | PASSED |
| 04-Mar-2024 12:13:49 | |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 SEVERE imagepol::fourierrotationmeasure Exception Reported: 2024-03-04 17:13:49 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 SEVERE imagepol::fourierrotationmeasure Exception Reported: 2024-03-04 17:13:49 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
| 04-Mar-2024 12:13:49 | test_tool_imagepol.py::po_fourierrotationmeasure_test::test_multibeam |
| 04-Mar-2024 12:13:49 | Test multibeam images for correct behavior |
| 04-Mar-2024 12:13:49 | pol_eq_beams.fits |
| 04-Mar-2024 12:13:49 | PASSED |
| 04-Mar-2024 12:13:49 | |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImagePolarimetry::fracLinPol Debiasing with sigma = 1.0119 |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:49 | test_tool_imagepol.py::po_fraclinpol_test::test_multibeam |
| 04-Mar-2024 12:13:49 | Test multibeam images for correct behavior |
| 04-Mar-2024 12:13:49 | pol_eq_beams.fits |
| 04-Mar-2024 12:13:49 | PASSED |
| 04-Mar-2024 12:13:49 | |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImagePolarimetry::fracTotPol Debiasing with sigma = 1.0119 |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:49 | test_tool_imagepol.py::po_fractotpol_test::test_multibeam |
| 04-Mar-2024 12:13:49 | Test multibeam images for correct behavior |
| 04-Mar-2024 12:13:49 | pol_eq_beams.fits |
| 04-Mar-2024 12:13:49 | PASSED |
| 04-Mar-2024 12:13:49 | |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImagePolTask::_sigma Determined noise from V image to be 1.0119 |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImagePolTask::_sigma Debiasing with sigma = 1.0119 |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:49 | test_tool_imagepol.py::po_linpolint_test::test_multibeam |
| 04-Mar-2024 12:13:49 | Test multibeam images for correct behavior |
| 04-Mar-2024 12:13:49 | pol_eq_beams.fits |
| 04-Mar-2024 12:13:49 | PASSED |
| 04-Mar-2024 12:13:49 | |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 WARN LinearPolarizationAngleCalculator::compute (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/LinearPolarizationAngleCalculator.cc, line 40) The input image has multiple beams. Because these beams can vary with stokes/polarization, they will not be copied to the output image |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:49 INFO SubImageFactory::createImage Creating image 'g' of shape [10, 10, 10, 1] |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:50 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:50 SEVERE imagepol::linpolposang Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:50 SEVERE imagepol::linpolposang+ ... thrown by casacore::Bool casa::ImagePolTask::_checkBeams(const std::vector<casa::ImagePolTask::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolTask.cc, line: 79 |
| 04-Mar-2024 12:13:49 | test_tool_imagepol.py::po_linpolposang_test::test_multibeam |
| 04-Mar-2024 12:13:49 | Test multibeam images for correct behavior |
| 04-Mar-2024 12:13:49 | pol_eq_beams.fits |
| 04-Mar-2024 12:13:49 | PASSED |
| 04-Mar-2024 12:13:49 | |
| 04-Mar-2024 12:13:49 | 2024-03-04 17:13:50 INFO ImageFactory::createImage Created Paged image 'rm_input.im' of shape [20, 20, 4, 20] with float valued pixels. |
| 04-Mar-2024 12:13:50 | 2024-03-04 17:13:50 INFO ImagePol::rotationMeasure Creating image 'rm.im' of shape [20, 20] |
| 04-Mar-2024 12:13:50 | 2024-03-04 17:13:51 INFO ImagePol::rotationMeasure Creating image 'pa0.im' of shape [20, 20, 1] |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO image::statistics Determining stats for image rm.im |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageRegion::fromRecord+ [0, 0] to [19, 19] (00:00:40.000, -00.10.00.001 to 23:59:24.000, +00.09.00.001) |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::_logStartup Statistics calculated using Classic algorithm |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::_logStartup Regions --- |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (pixel) [blc]: [0, 0] |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::_logStartup -- top-right corner (pixel) [trc]: [19, 19] |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (world) [blcf]: 00:00:40.000, -00.10.00.001 |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::_logStartup -- top-right corner (world) [trcf]: 23:59:24.000, +00.09.00.001 |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO Values --- |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- number of points [npts]: 400 |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- maximum value [max]: 9.60001 rad/m/m |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- minimum value [min]: 9.59997 rad/m/m |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- position of max value (pixel) [maxpos]: [3, 0] |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- position of min value (pixel) [minpos]: [1, 0] |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- position of max value (world) [maxposf]: 00:00:28.000, -00.10.00.001 |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- position of min value (world) [minposf]: 00:00:36.000, -00.10.00.001 |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- Sum of pixel values [sum]: 3839.99 rad/m/m |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- Sum of squared pixel values [sumsq]: 36863.9 rad/m/m.rad/m/m |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO Statistics --- |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- Mean of the pixel values [mean]: 9.59998 rad/m/m |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- Variance of the pixel values : 9.48741e-11 rad/m/m |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- Standard deviation of the Mean [sigma]: 9.74033e-06 rad/m/m |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- Root mean square [rms]: 9.59998 rad/m/m |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::statistics Sum column unit = rad/m/m |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::statistics+ Mean column unit = rad/m/m |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::statistics+ Std_dev column unit = rad/m/m |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::statistics+ Minimum column unit = rad/m/m |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::statistics+ Maximum column unit = rad/m/m |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::statistics Npts Sum Mean Rms Std_dev Minimum Maximum |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::statistics 4.000000e+02 3.839993e+03 9.599982e+00 9.599982e+00 9.740334e-06 9.599969e+00 9.600007e+00 |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO deleted table /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/rm.im |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO image::statistics Determining stats for image pa0.im |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO CasacRegionManager::fromBCS Using polarizations ALL |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageRegion::fromRecord+ [0, 0, 0] to [19, 19, 0] (00:00:40.000, -00.10.00.001, Pangle to 23:59:24.000, +00.09.00.001, Pangle) |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::_logStartup Statistics calculated using Classic algorithm |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::_logStartup Regions --- |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (pixel) [blc]: [0, 0, 0] |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::_logStartup -- top-right corner (pixel) [trc]: [19, 19, 0] |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (world) [blcf]: 00:00:40.000, -00.10.00.001, Pangle |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::_logStartup -- top-right corner (world) [trcf]: 23:59:24.000, +00.09.00.001, Pangle |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO Values --- |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- number of points [npts]: 400 |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- maximum value [max]: 22.5001 deg |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- minimum value [min]: 22.5 deg |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- position of max value (pixel) [maxpos]: [1, 0, 0] |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- position of min value (pixel) [minpos]: [3, 0, 0] |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- position of max value (world) [maxposf]: 00:00:36.000, -00.10.00.001, Pangle |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- position of min value (world) [minposf]: 00:00:28.000, -00.10.00.001, Pangle |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- Sum of pixel values [sum]: 9000.02 deg |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- Sum of squared pixel values [sumsq]: 202501 deg.deg |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO Statistics --- |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- Mean of the pixel values [mean]: 22.5 deg |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- Variance of the pixel values : 6.26899e-10 deg |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- Standard deviation of the Mean [sigma]: 2.5038e-05 deg |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO -- Root mean square [rms]: 22.5 deg |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::statistics Sum column unit = deg |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::statistics+ Mean column unit = deg |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::statistics+ Std_dev column unit = deg |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::statistics+ Minimum column unit = deg |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::statistics+ Maximum column unit = deg |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::statistics Npts Sum Mean Rms Std_dev Minimum Maximum |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageStatsCalculator::statistics 4.000000e+02 9.000018e+03 2.250005e+01 2.250005e+01 2.503796e-05 2.249998e+01 2.250008e+01 |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO deleted table /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/pa0.im |
| 04-Mar-2024 12:13:51 | test_tool_imagepol.py::po_rotationmeasure_test::test_algorithm |
| 04-Mar-2024 12:13:51 | Test rotation measure computation algorithm |
| 04-Mar-2024 12:13:51 | PASSED |
| 04-Mar-2024 12:13:51 | |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:51 INFO ImagePol::rotationMeasure Creating image 'g' of shape [10, 10] |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:52 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:52 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:51 | 2024-03-04 17:13:52 INFO ImagePol::rotationMeasure Creating image 'hh' of shape [10, 10] |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:52 SEVERE imagepol::rotationmeasure Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:52 SEVERE imagepol::rotationmeasure+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
| 04-Mar-2024 12:13:52 | test_tool_imagepol.py::po_rotationmeasure_test::test_multibeam |
| 04-Mar-2024 12:13:52 | Test multibeam images for correct behavior |
| 04-Mar-2024 12:13:52 | PASSED |
| 04-Mar-2024 12:13:52 | |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:52 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:52 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:52 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:52 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 04-Mar-2024 12:13:52 | test_tool_imagepol.py::po_sigma_test::test_multibeam |
| 04-Mar-2024 12:13:52 | Test multibeam images for correct behavior |
| 04-Mar-2024 12:13:52 | pol_eq_beams.fits |
| 04-Mar-2024 12:13:52 | PASSED |
| 04-Mar-2024 12:13:52 | |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:52 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:52 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:52 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:52 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:52 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:52 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:52 SEVERE imagepol::sigmadepolratio Exception Reported: Exception: Beams or beamsets are not equal between the two images, caonnot perform calculation. |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:52 SEVERE imagepol::sigmadepolratio+ ... thrown by static void casa::ImagePolarimetry::_checkBeams(const casa::ImagePolarimetry&, const casa::ImagePolarimetry&, const casacore::Vector<casa::ImagePolarimetry::StokesTypes>&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1686 |
| 04-Mar-2024 12:13:52 | test_tool_imagepol.py::po_sigmadepolratio_test::test_multibeam |
| 04-Mar-2024 12:13:52 | Test multibeam images for correct behavior |
| 04-Mar-2024 12:13:52 | PASSED |
| 04-Mar-2024 12:13:52 | |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:52 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:52 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:52 INFO imagepol::sigmaFracLinPol Creating image 'g' of shape [10, 10, 10, 1] |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:53 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:53 SEVERE imagepol::sigmafraclinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:53 SEVERE imagepol::sigmafraclinpol+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
| 04-Mar-2024 12:13:52 | test_tool_imagepol.py::po_sigmafraclinpol_test::test_multibeam |
| 04-Mar-2024 12:13:52 | Test multibeam images for correct behavior |
| 04-Mar-2024 12:13:52 | PASSED |
| 04-Mar-2024 12:13:52 | |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:53 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:53 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 04-Mar-2024 12:13:52 | 2024-03-04 17:13:53 INFO imagepol::sigmaFracTotPol Creating image 'g' of shape [10, 10, 10, 1] |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:53 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:53 WARN ImagePolarimetry::_setDoLinDoCirc (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line 272) I, Q, and U beams are not the same, cannot do linear portion |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:53 WARN ImagePolarimetry::_setDoLinDoCirc (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line 272) I and V beams are not the same, cannot do circular portion |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:53 SEVERE imagepol::sigmafractotpol Exception Reported: Exception: Can do neither linear nor circular portions. |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:53 SEVERE imagepol::sigmafractotpol+ ... thrown by void casa::ImagePolarimetry::_setDoLinDoCirc(casacore::Bool&, casacore::Bool&) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 292 |
| 04-Mar-2024 12:13:53 | test_tool_imagepol.py::po_sigmafractotpol_test::test_multibeam |
| 04-Mar-2024 12:13:53 | Test multibeam images for correct behavior |
| 04-Mar-2024 12:13:53 | PASSED |
| 04-Mar-2024 12:13:53 | |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:53 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:53 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:53 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:53 SEVERE imagepol::sigmalinpolint Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:53 SEVERE imagepol::sigmalinpolint+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
| 04-Mar-2024 12:13:53 | test_tool_imagepol.py::po_sigmalinpolint_test::test_multibeam |
| 04-Mar-2024 12:13:53 | Test multibeam images for correct behavior |
| 04-Mar-2024 12:13:53 | PASSED |
| 04-Mar-2024 12:13:53 | |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:53 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:53 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:53 INFO imagepol::sigmaLinPolPosAng Creating image 'g' of shape [10, 10, 10, 1] |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:53 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:53 SEVERE imagepol::sigmalinpolposang Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:53 SEVERE imagepol::sigmalinpolposang+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
| 04-Mar-2024 12:13:53 | test_tool_imagepol.py::po_sigmalinpolposang_test::test_multibeam |
| 04-Mar-2024 12:13:53 | Test multibeam images for correct behavior |
| 04-Mar-2024 12:13:53 | PASSED |
| 04-Mar-2024 12:13:53 | |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:53 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:54 INFO ImagePolTask::_sigma Determined noise from V image to be 1.0119 |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:54 INFO ImagePolTask::_sigma Debiasing with sigma = 1.0119 |
| 04-Mar-2024 12:13:53 | 2024-03-04 17:13:54 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
| 04-Mar-2024 12:13:53 | test_tool_imagepol.py::po_totpolint_test::test_multibeam |
| 04-Mar-2024 12:13:53 | Test multibeam images for correct behavior |
| 04-Mar-2024 12:13:53 | PASSED |
| 04-Mar-2024 12:13:53 | |
| 04-Mar-2024 12:13:53 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml - |
| 04-Mar-2024 12:13:53 | ======================== 17 passed, 1 warning in 6.43s ========================= |
| 04-Mar-2024 12:13:53 | ============================= test session starts ============================== |
| 04-Mar-2024 12:13:53 | platform linux -- Python 3.8.7, pytest-8.0.2, pluggy-1.4.0 -- /home/casatest/venv/bin/python3.8 |
| 04-Mar-2024 12:13:53 | cachedir: .pytest_cache |
| 04-Mar-2024 12:13:53 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator |
| 04-Mar-2024 12:13:53 | configfile: pytest.ini |
| 04-Mar-2024 12:13:54 | collecting ... collected 2 items |
| 04-Mar-2024 12:13:54 | |
| 04-Mar-2024 12:13:54 | |
| 04-Mar-2024 12:13:54 | 2024-03-04 17:13:55 INFO NewMSSimulator::NewMSSimulator(MeasurementSet& theMS) Opening MeasurementSet /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/settrop_split_ant_spw_copy.ms with 15990 rows |
| 04-Mar-2024 12:13:54 | 2024-03-04 17:13:55 INFO NewMSSimulator::NewMSSimulator(MeasurementSet& theMS) last spectral window ID = 1 |
| 04-Mar-2024 12:13:54 | 2024-03-04 17:13:55 INFO Simulator::create_corrupt() Creating TF Calibration structure for data corruption. |
| 04-Mar-2024 12:13:54 | 2024-03-04 17:13:55 INFO SVC::sizeUpSim() For simint = 0.1s, found 60 solution intervals. |
| 04-Mar-2024 12:13:54 | 2024-03-04 17:13:55 INFO T::createCorruptor() PWV fluctuations = 0.15 of mean PWV which is 3mm |
| 04-Mar-2024 12:13:54 | 2024-03-04 17:13:55 INFO AtmCorr::initAtm Initializing ATM |
| 04-Mar-2024 12:13:54 | 2024-03-04 17:13:55 INFO AtmCorr::initAtm altitude=5000m, Pground=560mb, Tground=270K, humidity= 20%, water scale height=2000m |
| 04-Mar-2024 12:13:54 | 2024-03-04 17:13:55 INFO AtmCorr::initAtm Spectral window 230(ch 64/128) |
| 04-Mar-2024 12:13:54 | 2024-03-04 17:13:55 INFO AtmCorr::initAtm After setting WH2O to 3 |
| 04-Mar-2024 12:13:54 | 2024-03-04 17:13:55 INFO AtmCorr::initAtm Dry and Wet Opacity from RefractiveIndexProfile = 0.0108571, 0.12934 at 230 GHz (ch64) |
| 04-Mar-2024 12:13:54 | 2024-03-04 17:13:55 INFO AtmCorr::initAtm Dry and Wet Opacity from SkyStatus = 0.0108571, 0.12934 |
| 04-Mar-2024 12:13:54 | 2024-03-04 17:13:55 INFO AtmCorr::initAtm Sky plus ground and CMB Brightness Temp across Spw 0, for spill=0.85 Tground=270 pwv=3 |
| 04-Mar-2024 12:13:54 | 2024-03-04 17:13:55 INFO AtmCorr::initAtm Zenith Tebb[229,230,230.984]=[73.1745,73.4238,74.3213] |
| 04-Mar-2024 12:13:54 | 2024-03-04 17:13:55 INFO AtmCorr::init(Seed,Beta,Scale,AntCols) creating new fBM of size 245,205 (may take a few minutes) ... |
| 04-Mar-2024 12:13:54 | 2024-03-04 17:13:55 INFO SVC[Tf Jones]::setSimulate() Calculating corruption terms for simulated Tf Jones: output table=settrop_table simint=0.1s t=0.1 |
| 04-Mar-2024 12:13:56 | 2024-03-04 17:13:57 INFO SVC[Tf Jones]::setSimulate() Writing calTable = settrop_table (Tf Jones) |
| 04-Mar-2024 12:13:56 | 2024-03-04 17:13:57 INFO Writing solutions to table: settrop_table |
| 04-Mar-2024 12:13:58 | 2024-03-04 17:13:58 INFO Simulator::corrupt() Doing visibility corruption. |
| 04-Mar-2024 12:13:58 | 2024-03-04 17:13:58 INFO Simulator::corrupt() simulated Tf Jones: output table=settrop_table simint=0.1s t=0spwok = [1] in corrupt mode. |
| 04-Mar-2024 12:13:58 | 2024-03-04 17:13:59 INFO Simulator::reset() Resetting all visibility corruption components |
| 04-Mar-2024 12:13:58 | 2024-03-04 17:13:59 INFO Simulator::reset() Reset all image-plane corruption components |
| 04-Mar-2024 12:13:58 | test_tool_simulator.py::sm_settrop_test::test_smsettrop |
| 04-Mar-2024 12:13:58 | PASSED |
| 04-Mar-2024 12:13:58 | |
| 04-Mar-2024 12:14:00 | 2024-03-04 17:14:01 INFO NewMSSimulator::initAnt() Using global coordinates for the antennas |
| 04-Mar-2024 12:14:00 | 2024-03-04 17:14:01 INFO NewMSSimulator::initAnt() Added rows to ANTENNA table |
| 04-Mar-2024 12:14:00 | 2024-03-04 17:14:01 INFO MSsimulator::initFeeds() Added rows to FEED table |
| 04-Mar-2024 12:14:00 | 2024-03-04 17:14:01 INFO MSsimulator::initSpWindows() Creating new spectral window LBand, ID 1 |
| 04-Mar-2024 12:14:00 | 2024-03-04 17:14:01 INFO simulator::settimes() Times |
| 04-Mar-2024 12:14:00 | 2024-03-04 17:14:01 INFO simulator::settimes()+ Integration time 2000s |
| 04-Mar-2024 12:14:00 | 2024-03-04 17:14:01 INFO simulator::settimes() Times will be interpreted as hour angles for first source |
| 04-Mar-2024 12:14:00 | 2024-03-04 17:14:01 INFO NewMSSimulator::observe() First source: fake @ 19:53:50.00 +40.06.00.00 J2000 |
| 04-Mar-2024 12:14:00 | 2024-03-04 17:14:01 INFO NewMSSimulator::observe()+ Full time range: 03-Oct-2019/21:16:01.8 -- 04-Oct-2019/07:16:01.8 TAI with int = 2000 |
| 04-Mar-2024 12:14:00 | 2024-03-04 17:14:01 INFO NewMSSimulator::observe() Calculating a total of 18 integrations |
| 04-Mar-2024 12:14:02 | 2024-03-04 17:14:02 INFO Simulator::reset() Resetting all visibility corruption components |
| 04-Mar-2024 12:14:02 | 2024-03-04 17:14:02 INFO Simulator::reset() Reset all image-plane corruption components |
| 04-Mar-2024 12:14:02 | 2024-03-04 17:14:03 INFO AgentFlagger::open Table type is Measurement Set |
| 04-Mar-2024 12:14:02 | 2024-03-04 17:14:03 INFO AgentFlagger::initAgents There are initially 1 agents in the list. Agents: unflag |
| 04-Mar-2024 12:14:02 | 2024-03-04 17:14:03 INFO AgentFlagger::initAgents There are 1 valid agents in the list. Agents: unflag |
| 04-Mar-2024 12:14:02 | 2024-03-04 17:14:03 INFO FlagMSHandler:: Chunk = 1 [progress: 100%], Observation = 0, Array = 0, Scan = 1, Field = 0 (fake), Spw = 0, Channels = 5, Corrs = [ RR LL ], Total Rows = 6318 |
| 04-Mar-2024 12:14:02 | 2024-03-04 17:14:03 INFO Unflag::chunkSummary => Data unflagged so far 100% (63180/63180) |
| 04-Mar-2024 12:14:02 | 2024-03-04 17:14:03 INFO FlagMSHandler::nextChunk ==================================================================================== |
| 04-Mar-2024 12:14:02 | 2024-03-04 17:14:03 INFO Unflag::tableSummary => Percentage of data un-flagged in table selection: 100% |
| 04-Mar-2024 12:14:02 | 2024-03-04 17:14:03 INFO AgentFlagger::run => Writing flags to the MS |
| 04-Mar-2024 12:14:03 | 2024-03-04 17:14:03 INFO NewMSSimulator::NewMSSimulator(MeasurementSet& theMS) Opening MeasurementSet /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/myms.ms with 6318 rows |
| 04-Mar-2024 12:14:03 | 2024-03-04 17:14:03 INFO NewMSSimulator::NewMSSimulator(MeasurementSet& theMS) last spectral window ID = 1 |
| 04-Mar-2024 12:14:03 | 2024-03-04 17:14:03 INFO Simulator::predict() Predicting visibilities using model: [] and componentList: mycomplist.cl |
| 04-Mar-2024 12:14:03 | 2024-03-04 17:14:03 INFO Simulator::predict() The data column will be replaced |
| 04-Mar-2024 12:14:03 | 2024-03-04 17:14:03 INFO Simulator::getVPRecord Using default Voltage Patterns from the VPManager |
| 04-Mar-2024 12:14:03 | 2024-03-04 17:14:03 INFO Simulator::getVPRecord Temporary alert : The state of the vpmanager tool has been modified by loading these primary beam models. If any of your scripts rely on the vpmanager state being preserved throughout your CASA session, please use vp.saveastable() and vp.loadfromtable() as needed. |
| 04-Mar-2024 12:14:03 | 2024-03-04 17:14:03 INFO Simulator::createSkyEquation() Synthesis gridding |
| 04-Mar-2024 12:14:03 | 2024-03-04 17:14:03 INFO Simulator::createSkyEquation() Fourier transforms will use image centers as tangent points |
| 04-Mar-2024 12:14:03 | 2024-03-04 17:14:03 INFO Simulator::reset() Resetting all visibility corruption components |
| 04-Mar-2024 12:14:03 | 2024-03-04 17:14:03 INFO Simulator::reset() Reset all image-plane corruption components |
| 04-Mar-2024 12:14:03 | test_tool_simulator.py::sm_predict_test::test_plp |
| 04-Mar-2024 12:14:03 | CAS-13439 verify support for plp, spectral curvature model |
| 04-Mar-2024 12:14:03 | PASSED |
| 04-Mar-2024 12:14:03 | |
| 04-Mar-2024 12:14:03 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_simulator/nose.xml - |
| 04-Mar-2024 12:14:03 | ========================= 2 passed, 1 warning in 9.54s ========================= |
| 04-Mar-2024 12:14:03 | ============================= test session starts ============================== |
| 04-Mar-2024 12:14:03 | platform linux -- Python 3.8.7, pytest-8.0.2, pluggy-1.4.0 -- /home/casatest/venv/bin/python3.8 |
| 04-Mar-2024 12:14:03 | cachedir: .pytest_cache |
| 04-Mar-2024 12:14:03 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_table |
| 04-Mar-2024 12:14:03 | configfile: pytest.ini |
| 04-Mar-2024 12:14:04 | collecting ... table tool tests will use /opt/casa/data/casatestdata/unittest/table/n08c1_swap1.ms |
| 04-Mar-2024 12:14:04 | collected 12 items |
| 04-Mar-2024 12:14:04 | |
| 04-Mar-2024 12:14:04 | |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:04 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:04 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | test_tool_table.py::TableGetcoliterTest::test_consistency |
| 04-Mar-2024 12:14:04 | PASSED |
| 04-Mar-2024 12:14:04 | |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:04 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:04 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | test_tool_table.py::TableGetcoliterTest::test_errors |
| 04-Mar-2024 12:14:04 | PASSED |
| 04-Mar-2024 12:14:04 | |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:04 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:04 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | test_tool_table.py::TableGetcoliterTest::test_values |
| 04-Mar-2024 12:14:04 | PASSED |
| 04-Mar-2024 12:14:04 | |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:04 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:04 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | test_tool_table.py::TableRowTest::test_all_rows |
| 04-Mar-2024 12:14:04 | PASSED |
| 04-Mar-2024 12:14:04 | |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:04 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:04 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | test_tool_table.py::TableRowTest::test_columnnames_exclude |
| 04-Mar-2024 12:14:04 | PASSED |
| 04-Mar-2024 12:14:04 | |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:05 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:05 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | test_tool_table.py::TableRowTest::test_columnnames_include |
| 04-Mar-2024 12:14:04 | PASSED |
| 04-Mar-2024 12:14:04 | |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:05 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:05 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | test_tool_table.py::TableRowTest::test_get |
| 04-Mar-2024 12:14:04 | Test get function |
| 04-Mar-2024 12:14:04 | PASSED |
| 04-Mar-2024 12:14:04 | |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:05 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:05 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:05 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:05 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | test_tool_table.py::TableRowTest::test_put |
| 04-Mar-2024 12:14:04 | Test put function |
| 04-Mar-2024 12:14:04 | PASSED |
| 04-Mar-2024 12:14:04 | |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:05 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:05 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | test_tool_table.py::TableRowTest::test_shape |
| 04-Mar-2024 12:14:04 | Test for valid data shape |
| 04-Mar-2024 12:14:04 | PASSED |
| 04-Mar-2024 12:14:04 | |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:05 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | 2024-03-04 17:14:05 INFO name:: No table opened. |
| 04-Mar-2024 12:14:04 | test_tool_table.py::TableRowTest::test_some_rows |
| 04-Mar-2024 12:14:04 | PASSED |
| 04-Mar-2024 12:14:04 | |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 INFO ImageFactory::createImage Created Paged image 'tmp.im' of shape [3, 4] with float valued pixels. |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::bogus Exception Reported: Table column bogus is unknown |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map Exception Reported: TableColumn: row number 1 exceeds #rows 1 in table /home/casatest/casa6/casatestutils/nosedir/test_tool_table/tmp.im |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map Exception Reported: Exception: blc must have length of 2. |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const std::vector<long int>&, const casacore::String&, const casacore::IPosition&, const std::pair<std::vector<long int>, std::vector<long int> >* const&) at File: src/tools/table/table_cmpt.cc, line: 1386 |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map Exception Reported: Exception: All elements of blc must be greater than or equal to 0. |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const std::vector<long int>&, const casacore::String&, const casacore::IPosition&, const std::pair<std::vector<long int>, std::vector<long int> >* const&) at File: src/tools/table/table_cmpt.cc, line: 1390 |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map Exception Reported: Exception: Element 1 of blc must be less than 4. |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const std::vector<long int>&, const casacore::String&, const casacore::IPosition&, const std::pair<std::vector<long int>, std::vector<long int> >* const&) at File: src/tools/table/table_cmpt.cc, line: 1395 |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map Exception Reported: Exception: trc must have length of 2. |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const std::vector<long int>&, const casacore::String&, const casacore::IPosition&, const std::pair<std::vector<long int>, std::vector<long int> >* const&) at File: src/tools/table/table_cmpt.cc, line: 1386 |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map Exception Reported: Exception: All elements of trc must be greater than or equal to 0. |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const std::vector<long int>&, const casacore::String&, const casacore::IPosition&, const std::pair<std::vector<long int>, std::vector<long int> >* const&) at File: src/tools/table/table_cmpt.cc, line: 1390 |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map Exception Reported: Exception: Element 0 of trc must be less than 3. |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const std::vector<long int>&, const casacore::String&, const casacore::IPosition&, const std::pair<std::vector<long int>, std::vector<long int> >* const&) at File: src/tools/table/table_cmpt.cc, line: 1395 |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map Exception Reported: Exception: All elements of trc must be greater than or equal to their corresponding blc elements. |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map+ ... thrown by void casac::table::_checkCorner(const std::vector<long int>&, const casacore::String&, const casacore::IPosition&, const std::pair<std::vector<long int>, std::vector<long int> >* const&) at File: src/tools/table/table_cmpt.cc, line: 1405 |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map Exception Reported: Exception: incr must have length of 2. |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map+ ... thrown by casac::variant* casac::table::getcellslice(const string&, long int, const std::vector<long int>&, const std::vector<long int>&, const std::vector<long int>&) at File: src/tools/table/table_cmpt.cc, line: 1466 |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map Exception Reported: Exception: All elements of incr must be greater than 0. |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 SEVERE getcellslice::map+ ... thrown by casac::variant* casac::table::getcellslice(const string&, long int, const std::vector<long int>&, const std::vector<long int>&, const std::vector<long int>&) at File: src/tools/table/table_cmpt.cc, line: 1471 |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 INFO name:: No table opened. |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 INFO name:: No table opened. |
| 04-Mar-2024 12:14:05 | test_tool_table.py::table_getcellslice_test::test_exceptions |
| 04-Mar-2024 12:14:05 | Test various exception cases |
| 04-Mar-2024 12:14:05 | PASSED |
| 04-Mar-2024 12:14:05 | |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:05 INFO ImageFactory::createImage Created Paged image 'tmp.im' of shape [3, 4] with float valued pixels. |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:06 INFO name:: No table opened. |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:06 INFO name:: No table opened. |
| 04-Mar-2024 12:14:05 | 2024-03-04 17:14:06 INFO name:: No table opened. |
| 04-Mar-2024 12:14:05 | test_tool_table.py::table_getcellslice_test::test_getcellslice |
| 04-Mar-2024 12:14:05 | tests for valid inputs |
| 04-Mar-2024 12:14:05 | PASSED |
| 04-Mar-2024 12:14:05 | |
| 04-Mar-2024 12:14:05 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_table/nose.xml - |
| 04-Mar-2024 12:14:05 | ======================== 12 passed, 2 warnings in 1.90s ======================== |
| 04-Mar-2024 12:14:05 | ============================= test session starts ============================== |
| 04-Mar-2024 12:14:05 | platform linux -- Python 3.8.7, pytest-8.0.2, pluggy-1.4.0 -- /home/casatest/venv/bin/python3.8 |
| 04-Mar-2024 12:14:05 | cachedir: .pytest_cache |
| 04-Mar-2024 12:14:05 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor |
| 04-Mar-2024 12:14:05 | configfile: pytest.ini |
| 04-Mar-2024 12:14:06 | collecting ... collected 9 items |
| 04-Mar-2024 12:14:06 | |
| 04-Mar-2024 12:14:06 | |
| 04-Mar-2024 12:14:06 | 2024-03-04 17:14:06 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:06 | 2024-03-04 17:14:06 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:06 | 2024-03-04 17:14:06 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 04-Mar-2024 12:14:06 | 2024-03-04 17:14:06 INFO CasacRegionManager::fromBCS Using all spectral channels. |
| 04-Mar-2024 12:14:06 | 2024-03-04 17:14:06 INFO CasacRegionManager::fromBCS Using polarizations ALL |
| 04-Mar-2024 12:14:06 | 2024-03-04 17:14:06 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:06 | 2024-03-04 17:14:06 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 4, 1] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, Q) |
| 04-Mar-2024 12:14:06 | 2024-03-04 17:14:06 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:06 | 2024-03-04 17:14:06 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 4, 1] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, Q) |
| 04-Mar-2024 12:14:06 | 2024-03-04 17:14:07 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [113, 76, 5, 2] |
| 04-Mar-2024 12:14:06 | 2024-03-04 17:14:07 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 04-Mar-2024 12:14:07 | 2024-03-04 17:14:07 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:07 | 2024-03-04 17:14:07 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 0, 0] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, I) |
| 04-Mar-2024 12:14:07 | 2024-03-04 17:14:07 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 04-Mar-2024 12:14:07 | 2024-03-04 17:14:07 INFO CasacRegionManager::fromBCS Using all spectral channels. |
| 04-Mar-2024 12:14:07 | 2024-03-04 17:14:07 INFO CasacRegionManager::fromBCS Using polarizations ALL |
| 04-Mar-2024 12:14:07 | 2024-03-04 17:14:07 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:07 | 2024-03-04 17:14:07 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 4, 1] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, Q) |
| 04-Mar-2024 12:14:07 | 2024-03-04 17:14:07 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:07 | 2024-03-04 17:14:07 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 4, 1] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, Q) |
| 04-Mar-2024 12:14:07 | 2024-03-04 17:14:07 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [113, 76, 5, 2] |
| 04-Mar-2024 12:14:07 | 2024-03-04 17:14:08 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 04-Mar-2024 12:14:08 | 2024-03-04 17:14:08 INFO name:: No table opened. |
| 04-Mar-2024 12:14:08 | 2024-03-04 17:14:08 INFO showcache:: The Table Cache is empty. |
| 04-Mar-2024 12:14:08 | test_tool_image_pbcor.py::ia_pbcor_test::test_4d_image_with_2d_pb |
| 04-Mar-2024 12:14:08 | ia.pbcor: Test full image divide with cutoff. Primary beam is 2 D, image is 4 D |
| 04-Mar-2024 12:14:08 | PASSED |
| 04-Mar-2024 12:14:08 | |
| 04-Mar-2024 12:14:08 | 2024-03-04 17:14:08 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [5, 5, 1, 1] |
| 04-Mar-2024 12:14:08 | 2024-03-04 17:14:09 INFO name:: No table opened. |
| 04-Mar-2024 12:14:08 | 2024-03-04 17:14:09 INFO showcache:: The Table Cache is empty. |
| 04-Mar-2024 12:14:08 | test_tool_image_pbcor.py::ia_pbcor_test::test_diff_spectral_coordinate |
| 04-Mar-2024 12:14:08 | Verify fix that a different spectral coordinates in target and template don't matter, CAS-5096 |
| 04-Mar-2024 12:14:08 | PASSED |
| 04-Mar-2024 12:14:08 | |
| 04-Mar-2024 12:14:09 | 2024-03-04 17:14:09 INFO ImageFactory::createImage Created Paged image 't_in.im' of shape [20, 20, 4, 20] with float valued pixels. |
| 04-Mar-2024 12:14:09 | 2024-03-04 17:14:10 INFO ImageFactory::createImage Created Paged image 't_pb_in.im' of shape [20, 20, 4, 20] with float valued pixels. |
| 04-Mar-2024 12:14:09 | 2024-03-04 17:14:10 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 04-Mar-2024 12:14:09 | 2024-03-04 17:14:10 INFO CasacRegionManager::fromBCS Using all spectral channels. |
| 04-Mar-2024 12:14:09 | 2024-03-04 17:14:10 INFO CasacRegionManager::fromBCS Using polarizations I |
| 04-Mar-2024 12:14:09 | 2024-03-04 17:14:10 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:09 | 2024-03-04 17:14:10 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [19, 19, 0, 19] (00:00:40.000, -00.10.00.001, I, 1.41499e+09Hz to 23:59:24.000, +00.09.00.001, I, 1.41501e+09Hz) |
| 04-Mar-2024 12:14:09 | 2024-03-04 17:14:10 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:09 | 2024-03-04 17:14:10 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [19, 19, 0, 19] (00:00:40.000, -00.10.00.001, I, 1.41499e+09Hz to 23:59:24.000, +00.09.00.001, I, 1.41501e+09Hz) |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:10 INFO SubImageFactory::createImage Creating image 't_out.im' of shape [20, 20, 1, 20] |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO name:: No table opened. |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO showcache:: The Table Cache is empty. |
| 04-Mar-2024 12:14:10 | test_tool_image_pbcor.py::ia_pbcor_test::test_empty_region_and_stokes |
| 04-Mar-2024 12:14:10 | Test specifying stokes with empty region works (CAS-11708) |
| 04-Mar-2024 12:14:10 | PASSED |
| 04-Mar-2024 12:14:10 | |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 SEVERE image::open (file src/tools/image/image_cmpt.cc, line 4208) Exception Reported: Exception: File name is empty. |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 SEVERE image::open (file src/tools/image/image_cmpt.cc, line 4208)+ ... thrown by static void casa::ImageFactory::_checkInfile(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 371 |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 SEVERE image::open (file src/tools/image/image_cmpt.cc, line 4208) Exception Reported: Exception: File totally_bogus does not exist.. |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 SEVERE image::open (file src/tools/image/image_cmpt.cc, line 4208)+ ... thrown by static void casa::ImageFactory::_checkInfile(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 375 |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289) Exception Reported: Exception: The image filename is empty. |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289)+ ... thrown by static void casacore::ImageUtilities::openImage(casacore::ImageInterface<T>*&, const casacore::String&) [with T = float] at File: /source/casainstall/include/casacore/images/Images/ImageUtilities2.tcc, line: 255 |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289) Exception Reported: Exception: File 'totally_bogus2' does not exist. |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289)+ ... thrown by static void casacore::ImageUtilities::openImage(casacore::ImageInterface<T>*&, const casacore::String&) [with T = float] at File: /source/casainstall/include/casacore/images/Images/ImageUtilities2.tcc, line: 260 |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 SEVERE ImageInputProcessor::_process Requested output image /bogusplace/bogusimage cannot be created so will not be written |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289) Exception Reported: 2024-03-04 17:14:11 SEVERE ImageInputProcessor::_process Requested output image /bogusplace/bogusimage cannot be created so will not be written |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 WARN /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/pbtest1_im.fits is not a valid or readable table |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 SEVERE Cannot read image /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/pbtest1_im.fits to get region bogus_region |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289) Exception Reported: Unable to open region file or region table description bogus_region in image /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/pbtest1_im.fits at File: /source/casa6/casatools/src/code/imageanalysis/Regions/CasacRegionManager.cc, line: 486 |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289) Exception Reported: Unknown mode zz |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289) Exception Reported: Coordinate systems of image and template are different: The DirectionCoordinates have differing LinearXform components at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePrimaryBeamCorrector.cc, line: 141 |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO name:: No table opened. |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO showcache:: The Table Cache is empty. |
| 04-Mar-2024 12:14:10 | test_tool_image_pbcor.py::ia_pbcor_test::test_exceptions |
| 04-Mar-2024 12:14:10 | ia.pbcor: Test various exception cases |
| 04-Mar-2024 12:14:10 | PASSED |
| 04-Mar-2024 12:14:10 | |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO ImageRegion::fromRecord+ [0, 0] to [112, 75] (00:00:29.333, -00.07.24.000 to 23:59:29.600, +00.07.36.000) |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO ImageRegion::fromRecord+ [0, 0] to [112, 75] (00:00:29.333, -00.07.24.000 to 23:59:29.600, +00.07.36.000) |
| 04-Mar-2024 12:14:10 | 2024-03-04 17:14:11 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [113, 76] |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:11 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:11 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:11 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:11 INFO ImageRegion::fromRecord+ [0, 0] to [112, 75] (00:00:29.333, -00.07.24.000 to 23:59:29.600, +00.07.36.000) |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:11 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:11 INFO ImageRegion::fromRecord+ [0, 0] to [112, 75] (00:00:29.333, -00.07.24.000 to 23:59:29.600, +00.07.36.000) |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:12 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [113, 76] |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:12 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:12 INFO name:: No table opened. |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:12 INFO showcache:: The Table Cache is empty. |
| 04-Mar-2024 12:14:11 | test_tool_image_pbcor.py::ia_pbcor_test::test_full_image_divide |
| 04-Mar-2024 12:14:11 | ia.pbcor: Test full image divide |
| 04-Mar-2024 12:14:11 | PASSED |
| 04-Mar-2024 12:14:11 | |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:12 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:12 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:12 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:12 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:12 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:12 INFO ImageRegion::fromRecord+ [0, 0] to [112, 75] (00:00:29.333, -00.07.24.000 to 23:59:29.600, +00.07.36.000) |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:12 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:11 | 2024-03-04 17:14:12 INFO ImageRegion::fromRecord+ [0, 0] to [112, 75] (00:00:29.333, -00.07.24.000 to 23:59:29.600, +00.07.36.000) |
| 04-Mar-2024 12:14:12 | 2024-03-04 17:14:12 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [113, 76] |
| 04-Mar-2024 12:14:12 | 2024-03-04 17:14:12 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 04-Mar-2024 12:14:12 | 2024-03-04 17:14:13 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:12 | 2024-03-04 17:14:13 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 04-Mar-2024 12:14:12 | 2024-03-04 17:14:13 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:12 | 2024-03-04 17:14:13 INFO ImageRegion::fromRecord+ [0, 0] to [112, 75] (00:00:29.333, -00.07.24.000 to 23:59:29.600, +00.07.36.000) |
| 04-Mar-2024 12:14:12 | 2024-03-04 17:14:13 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:12 | 2024-03-04 17:14:13 INFO ImageRegion::fromRecord+ [0, 0] to [112, 75] (00:00:29.333, -00.07.24.000 to 23:59:29.600, +00.07.36.000) |
| 04-Mar-2024 12:14:12 | 2024-03-04 17:14:13 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [113, 76] |
| 04-Mar-2024 12:14:13 | 2024-03-04 17:14:13 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 04-Mar-2024 12:14:13 | 2024-03-04 17:14:13 INFO name:: No table opened. |
| 04-Mar-2024 12:14:13 | 2024-03-04 17:14:13 INFO showcache:: The Table Cache is empty. |
| 04-Mar-2024 12:14:13 | test_tool_image_pbcor.py::ia_pbcor_test::test_full_image_using_cutoff |
| 04-Mar-2024 12:14:13 | ia.pbcor: Test full image divide with cutoff |
| 04-Mar-2024 12:14:13 | PASSED |
| 04-Mar-2024 12:14:13 | |
| 04-Mar-2024 12:14:13 | 2024-03-04 17:14:14 INFO ImageFactory::createImage Created Paged image 'zz.im' of shape [20, 20] with float valued pixels. |
| 04-Mar-2024 12:14:14 | 2024-03-04 17:14:14 INFO SubImageFactory::createImage Creating image 'pb_out.im' of shape [20, 20] |
| 04-Mar-2024 12:14:14 | 2024-03-04 17:14:14 INFO ::::ImageFactory::createImage Created Paged image 'zz.im' of shape [20, 20] with float valued pixels. |
| 04-Mar-2024 12:14:14 | 2024-03-04 17:14:14 INFO ::::image::fromshape Ran ia.fromshape |
| 04-Mar-2024 12:14:14 | 2024-03-04 17:14:14 INFO ::::image::fromshape ia.fromshape(outfile="zz.im", shape=[20,20], csys={...}, linear=false, overwrite=false, log=true, type="f") |
| 04-Mar-2024 12:14:14 | 2024-03-04 17:14:14 INFO ::::image::pbcor Ran ia.pbcor |
| 04-Mar-2024 12:14:14 | 2024-03-04 17:14:14 INFO ::::image::pbcor ia.pbcor(pbimage="(...)", outfile="pb_out.im", overwrite=false, box="", region={...}, chans="", stokes="", mask="", mode="divide", cutoff=-1.000000, stretch=false) |
| 04-Mar-2024 12:14:14 | 2024-03-04 17:14:14 INFO name:: No table opened. |
| 04-Mar-2024 12:14:14 | 2024-03-04 17:14:14 INFO showcache:: The Table Cache is empty. |
| 04-Mar-2024 12:14:14 | test_tool_image_pbcor.py::ia_pbcor_test::test_history |
| 04-Mar-2024 12:14:14 | Test history records are written |
| 04-Mar-2024 12:14:14 | PASSED |
| 04-Mar-2024 12:14:14 | |
| 04-Mar-2024 12:14:14 | 2024-03-04 17:14:15 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:14 | 2024-03-04 17:14:15 INFO ImageFactory::createImage Created Paged image 'mult_pb.im' of shape [113, 76] with float valued pixels. |
| 04-Mar-2024 12:14:14 | 2024-03-04 17:14:15 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 04-Mar-2024 12:14:14 | 2024-03-04 17:14:15 INFO CasacRegionManager::fromBCS Using all spectral channels. |
| 04-Mar-2024 12:14:14 | 2024-03-04 17:14:15 INFO CasacRegionManager::fromBCS Using polarizations ALL |
| 04-Mar-2024 12:14:14 | 2024-03-04 17:14:15 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:14 | 2024-03-04 17:14:15 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 4, 1] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, Q) |
| 04-Mar-2024 12:14:14 | 2024-03-04 17:14:15 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:14 | 2024-03-04 17:14:15 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 4, 1] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, Q) |
| 04-Mar-2024 12:14:15 | 2024-03-04 17:14:15 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [113, 76, 5, 2] |
| 04-Mar-2024 12:14:15 | 2024-03-04 17:14:15 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 04-Mar-2024 12:14:15 | 2024-03-04 17:14:16 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:15 | 2024-03-04 17:14:16 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 0, 0] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, I) |
| 04-Mar-2024 12:14:15 | 2024-03-04 17:14:16 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
| 04-Mar-2024 12:14:15 | 2024-03-04 17:14:16 INFO CasacRegionManager::fromBCS Using all spectral channels. |
| 04-Mar-2024 12:14:15 | 2024-03-04 17:14:16 INFO CasacRegionManager::fromBCS Using polarizations ALL |
| 04-Mar-2024 12:14:15 | 2024-03-04 17:14:16 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:15 | 2024-03-04 17:14:16 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 4, 1] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, Q) |
| 04-Mar-2024 12:14:15 | 2024-03-04 17:14:16 INFO ImageRegion::fromRecord Selected bounding box : |
| 04-Mar-2024 12:14:15 | 2024-03-04 17:14:16 INFO ImageRegion::fromRecord+ [0, 0, 0, 0] to [112, 75, 4, 1] (00:03:44.024, -00.38.00.046, 1.415e+09Hz, I to 23:56:15.977, +00.37.00.043, 1.415e+09Hz, Q) |
| 04-Mar-2024 12:14:16 | 2024-03-04 17:14:16 INFO SubImageFactory::createImage Creating image 'mypb.im' of shape [113, 76, 5, 2] |
| 04-Mar-2024 12:14:16 | 2024-03-04 17:14:17 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 04-Mar-2024 12:14:16 | 2024-03-04 17:14:17 INFO name:: No table opened. |
| 04-Mar-2024 12:14:16 | 2024-03-04 17:14:17 INFO showcache:: The Table Cache is empty. |
| 04-Mar-2024 12:14:16 | test_tool_image_pbcor.py::ia_pbcor_test::test_multiply |
| 04-Mar-2024 12:14:16 | ia.pbcor: Test full image multiply with cutoff. Primary beam is 2 D, image is 4 D |
| 04-Mar-2024 12:14:16 | PASSED |
| 04-Mar-2024 12:14:16 | |
| 04-Mar-2024 12:14:17 | 2024-03-04 17:14:17 INFO ImageFactory::createImage Created Temp image of shape [113, 76, 1, 1] with float valued pixels. |
| 04-Mar-2024 12:14:17 | 2024-03-04 17:14:17 INFO SubImageFactory::createImage Creating image 'maskim' of shape [113, 76, 1, 1] |
| 04-Mar-2024 12:14:17 | 2024-03-04 17:14:18 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:17 | 2024-03-04 17:14:18 SEVERE image::pbcor (file src/tools/image/image_cmpt.cc, line 4289) Exception Reported: The input image shape ([113, 76, 5, 2]) and mask shape ([113, 76, 1, 1]) are different, and it was specified that the mask should not be extended, so the mask cannot be applied to the (sub)image. Specifying that the mask should be extended may resolve the issue at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 306 |
| 04-Mar-2024 12:14:17 | 2024-03-04 17:14:18 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
| 04-Mar-2024 12:14:17 | 2024-03-04 17:14:18 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
| 04-Mar-2024 12:14:17 | 2024-03-04 17:14:18 INFO SubImageFactory::createImage Creating image 'blahblah' of shape [113, 76, 5, 2] |
| 04-Mar-2024 12:14:17 | 2024-03-04 17:14:18 INFO ImageMaskAttacher::makeMask Created mask `mask0' |
| 04-Mar-2024 12:14:18 | 2024-03-04 17:14:18 INFO name:: No table opened. |
| 04-Mar-2024 12:14:18 | 2024-03-04 17:14:18 INFO showcache:: The Table Cache is empty. |
| 04-Mar-2024 12:14:18 | test_tool_image_pbcor.py::ia_pbcor_test::test_stretch |
| 04-Mar-2024 12:14:18 | ia.pbcor(): Test stretch parameter |
| 04-Mar-2024 12:14:18 | PASSED |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pbcor/nose.xml - |
| 04-Mar-2024 12:14:18 | ======================== 9 passed, 1 warning in 12.32s ========================= |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms/ |
| 04-Mar-2024 12:14:18 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_sdm_toms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm_toms/ |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms/ |
| 04-Mar-2024 12:14:18 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms/ |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_regionmanager/ |
| 04-Mar-2024 12:14:18 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_regionmanager |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_regionmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_regionmanager/ |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image/ |
| 04-Mar-2024 12:14:18 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image/ |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
| 04-Mar-2024 12:14:18 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_agentflagger/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_agentflagger/ |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 04-Mar-2024 12:14:18 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_statwt/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 04-Mar-2024 12:14:18 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_regrid/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_regrid/ |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_logsink/ |
| 04-Mar-2024 12:14:18 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_logsink |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_logsink/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_logsink/ |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 04-Mar-2024 12:14:18 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_rebin/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta/ |
| 04-Mar-2024 12:14:18 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_quanta/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_quanta/ |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 04-Mar-2024 12:14:18 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_componentlist/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_componentlist/ |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 04-Mar-2024 12:14:18 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
| 04-Mar-2024 12:14:18 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msuvbinner/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 04-Mar-2024 12:14:18 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/ |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/ |
| 04-Mar-2024 12:14:18 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_simulator/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/ |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_table/ |
| 04-Mar-2024 12:14:18 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_table |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_table/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_table/ |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
| 04-Mar-2024 12:14:18 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor |
| 04-Mar-2024 12:14:18 | |
| 04-Mar-2024 12:14:18 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pbcor/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pbcor/ |
| 04-Mar-2024 12:14:20 | total 175140 |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci 15001 128068 Mar 4 16:44 casatestutils-6.6.4.5a14293.dev1+dirty-py3-none-any.whl |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci 15001 179045057 Mar 4 16:44 casatools-6.6.4.5a14293.dev1+dirty-cp38-cp38-manylinux_2_28_x86_64.whl |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 4314 Mar 4 17:14 test_tool_agentflagger.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 980 Mar 4 17:14 test_tool_calanalysis.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 2632 Mar 4 17:14 test_tool_calibrater.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 661 Mar 4 17:14 test_tool_componentlist.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 7441 Mar 4 17:14 test_tool_coordsys.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 12803 Mar 4 17:14 test_tool_image.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 2195 Mar 4 17:14 test_tool_image_collapse.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 1022 Mar 4 17:14 test_tool_image_deviation.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 2550 Mar 4 17:14 test_tool_image_fitprofile.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 1153 Mar 4 17:14 test_tool_image_pbcor.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 858 Mar 4 17:14 test_tool_image_pv.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 980 Mar 4 17:14 test_tool_image_rebin.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 1310 Mar 4 17:14 test_tool_image_regrid.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 1507 Mar 4 17:14 test_tool_image_statistics.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 739 Mar 4 17:14 test_tool_image_subimage.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 864 Mar 4 17:14 test_tool_image_transpose.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 1940 Mar 4 17:14 test_tool_imagepol.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 813 Mar 4 17:14 test_tool_linearmosaic.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 642 Mar 4 17:14 test_tool_logsink.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 523 Mar 4 17:14 test_tool_measures.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 5198 Mar 4 17:14 test_tool_ms.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 341 Mar 4 17:14 test_tool_ms_createmultims.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 2069 Mar 4 17:14 test_tool_ms_statwt.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 8486 Mar 4 17:14 test_tool_msmetadata.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 333 Mar 4 17:14 test_tool_msuvbinner.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 1145 Mar 4 17:14 test_tool_quanta.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 3951 Mar 4 17:14 test_tool_regionmanager.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 2047 Mar 4 17:14 test_tool_sdm.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 2077 Mar 4 17:14 test_tool_sdm_toms.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 422 Mar 4 17:14 test_tool_simulator.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 1337 Mar 4 17:14 test_tool_table.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 1693 Mar 4 17:14 test_tool_vpmanager.xml |
| 04-Mar-2024 12:14:20 | Finished task 'Test wheel' with result: Success |
| 04-Mar-2024 12:14:20 | Starting task 'Tar work directory' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
| 04-Mar-2024 12:14:20 | Beginning to execute external process for build 'CASA - CMake CI Build - CAS-14293 - Test Tools Many Linux 2.28 #1 (CASA-CMAKECI152-TTOML228-1)' ... running command line: /export/home/cbt-el7-8/bamboohome/temp/CASA-CMAKECI152-TTOML228-1-ScriptBuildTask-4735852811753621818.sh ... in: /export/home/cbt-el7-8/bamboohome/xml-data/build-dir/CASA-CMAKECI152-TTOML228 |
| 04-Mar-2024 12:14:20 | Package working directory |
| 04-Mar-2024 12:14:20 | tar: work: Cannot stat: No such file or directory |
| 04-Mar-2024 12:14:20 | tar: Exiting with failure status due to previous errors |
| 04-Mar-2024 12:14:20 | total 175144 |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci 15001 128068 Mar 4 16:44 casatestutils-6.6.4.5a14293.dev1+dirty-py3-none-any.whl |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci 15001 179045057 Mar 4 16:44 casatools-6.6.4.5a14293.dev1+dirty-cp38-cp38-manylinux_2_28_x86_64.whl |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 4314 Mar 4 17:14 test_tool_agentflagger.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 980 Mar 4 17:14 test_tool_calanalysis.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 2632 Mar 4 17:14 test_tool_calibrater.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 661 Mar 4 17:14 test_tool_componentlist.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 7441 Mar 4 17:14 test_tool_coordsys.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 12803 Mar 4 17:14 test_tool_image.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 2195 Mar 4 17:14 test_tool_image_collapse.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 1022 Mar 4 17:14 test_tool_image_deviation.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 2550 Mar 4 17:14 test_tool_image_fitprofile.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 1153 Mar 4 17:14 test_tool_image_pbcor.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 858 Mar 4 17:14 test_tool_image_pv.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 980 Mar 4 17:14 test_tool_image_rebin.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 1310 Mar 4 17:14 test_tool_image_regrid.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 1507 Mar 4 17:14 test_tool_image_statistics.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 739 Mar 4 17:14 test_tool_image_subimage.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 864 Mar 4 17:14 test_tool_image_transpose.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 1940 Mar 4 17:14 test_tool_imagepol.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 813 Mar 4 17:14 test_tool_linearmosaic.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 642 Mar 4 17:14 test_tool_logsink.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 523 Mar 4 17:14 test_tool_measures.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 5198 Mar 4 17:14 test_tool_ms.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 341 Mar 4 17:14 test_tool_ms_createmultims.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 2069 Mar 4 17:14 test_tool_ms_statwt.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 8486 Mar 4 17:14 test_tool_msmetadata.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 333 Mar 4 17:14 test_tool_msuvbinner.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 1145 Mar 4 17:14 test_tool_quanta.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 3951 Mar 4 17:14 test_tool_regionmanager.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 2047 Mar 4 17:14 test_tool_sdm.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 2077 Mar 4 17:14 test_tool_sdm_toms.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 422 Mar 4 17:14 test_tool_simulator.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 1337 Mar 4 17:14 test_tool_table.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 1693 Mar 4 17:14 test_tool_vpmanager.xml |
| 04-Mar-2024 12:14:20 | -rw-r--r-- 1 casaci root 45 Mar 4 17:14 work-el7-3.8.tar.gz |
| 04-Mar-2024 12:14:20 | Done packaging working directory |
| 04-Mar-2024 12:14:20 | Finished task 'Tar work directory' with result: Success |
| 04-Mar-2024 12:14:20 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
| 04-Mar-2024 12:14:20 | Parsing test results under /export/home/cbt-el7-8/bamboohome/xml-data/build-dir/CASA-CMAKECI152-TTOML228... |
| 04-Mar-2024 12:14:21 | Finished task 'Parse tests' with result: Success |
| 04-Mar-2024 12:14:21 | Skipping execution of task 'Upload wheel' as it is disabled |
| 04-Mar-2024 12:14:21 | Starting task 'Cleanup' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
| 04-Mar-2024 12:14:21 | Beginning to execute external process for build 'CASA - CMake CI Build - CAS-14293 - Test Tools Many Linux 2.28 #1 (CASA-CMAKECI152-TTOML228-1)' ... running command line: /export/home/cbt-el7-8/bamboohome/temp/CASA-CMAKECI152-TTOML228-1-ScriptBuildTask-2475345141379309094.sh ... in: /export/home/cbt-el7-8/bamboohome/xml-data/build-dir/CASA-CMAKECI152-TTOML228 |
| 04-Mar-2024 12:14:21 | Starting cleanup |
| 04-Mar-2024 12:14:34 | wheel-container-test |
| 04-Mar-2024 12:14:36 | wheel-container-test |
| 04-Mar-2024 12:14:36 | Cleanup complete |
| 04-Mar-2024 12:14:36 | Finished task 'Cleanup' with result: Success |
| 04-Mar-2024 12:14:36 | Running post build plugin 'Docker Container Cleanup' |
| 04-Mar-2024 12:14:36 | Beginning to execute external process for build 'CASA - CMake CI Build - CAS-14293 - Test Tools Many Linux 2.28 #1 (CASA-CMAKECI152-TTOML228-1)' ... running command line: /bin/docker rm -f wheel-container-test ... in: /export/home/cbt-el7-8/bamboohome/xml-data/build-dir/CASA-CMAKECI152-TTOML228 |
| 04-Mar-2024 12:14:36 | Error response from daemon: No such container: wheel-container-test |
| 04-Mar-2024 12:14:36 | Running post build plugin 'NCover Results Collector' |
| 04-Mar-2024 12:14:36 | Running post build plugin 'Build Results Label Collector' |
| 04-Mar-2024 12:14:36 | Running post build plugin 'Clover Results Collector' |
| 04-Mar-2024 12:14:36 | Running post build plugin 'npm Cache Cleanup' |
| 04-Mar-2024 12:14:36 | Running post build plugin 'Artifact Copier' |
| 04-Mar-2024 12:14:36 | Publishing an artifact: Workdir |
| 04-Mar-2024 12:14:36 | Finished publishing of artifact Non required job artifact Http Compression On : [Workdir], patterns: [work*.tar.gz] anchored at: [wheeldirectory/] in 124.3 ms |
| 04-Mar-2024 12:14:36 | Publishing an artifact: Tests |
| 04-Mar-2024 12:14:36 | Finished publishing of artifact Non required job artifact Http Compression On : [Tests], patterns: [*.xml] anchored at: [wheeldirectory/] in 320.8 ms |
| 04-Mar-2024 12:14:36 | Publishing an artifact: xml Directories |
| 04-Mar-2024 12:14:37 | Finished publishing of artifact Non required job artifact Http Compression On : [xml Directories], patterns: [**/*.xml] anchored at: [wheeldirectory/] in 362.9 ms |
| 04-Mar-2024 12:14:37 | Finalising the build... |
| 04-Mar-2024 12:14:37 | Stopping timer. |
| 04-Mar-2024 12:14:37 | Build CASA-CMAKECI152-TTOML228-1 completed. |
| 04-Mar-2024 12:14:37 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
| 04-Mar-2024 12:14:37 | Running on server: post build plugin 'NCover Results Collector' |
| 04-Mar-2024 12:14:37 | Running on server: post build plugin 'Build Labeller' |
| 04-Mar-2024 12:14:37 | Running on server: post build plugin 'Clover Delta Calculator' |
| 04-Mar-2024 12:14:37 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
| 04-Mar-2024 12:14:37 | All post build plugins have finished |
| 04-Mar-2024 12:14:37 | Generating build results summary... |
| 04-Mar-2024 12:14:37 | Saving build results to disk... |
| 04-Mar-2024 12:14:37 | Store variable context... |
| 04-Mar-2024 12:14:37 | Finished building CASA-CMAKECI152-TTOML228-1. |