Build: #18 was successful
Job: Test Tools Many Linux 2.28 was successful
Build log
The build generated 52,865 lines of output.The output is too long and has been truncated to the last 1,000 lines. Download or view full build log.
22-Feb-2024 13:44:00 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0630839/0.0689061/0.0756384 |
22-Feb-2024 13:44:00 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 0.279482/0.74979/1.59355 |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0672607/0.089081/0.111106 |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.31075/3.32219/4.29305 |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0652822/0.0889198/0.116912 |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:01 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:02 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.44269/3.26616/4.3519 |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:02 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:02 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:02 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:02 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:02 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:02 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:02 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:02 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:02 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:02 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:02 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:02 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350681/0.587724/0.894558 |
22-Feb-2024 13:44:01 | 2024-02-22 18:44:02 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
22-Feb-2024 13:44:03 | 2024-02-22 18:44:03 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.296/59.0077/111.454 |
22-Feb-2024 13:44:03 | 2024-02-22 18:44:03 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
22-Feb-2024 13:44:03 | 2024-02-22 18:44:03 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.354236/0.581733/0.988903 |
22-Feb-2024 13:44:03 | 2024-02-22 18:44:03 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 17.2419/56.3249/117.264 |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0850169/0.113968/0.15276 |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.67561/5.33243/8.17296 |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0784236/0.114345/0.159908 |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:05 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.46392/5.27232/7.20673 |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0703936/0.102501/0.131676 |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.98728/4.47977/5.84264 |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0751114/0.102994/0.138529 |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 3.18629/4.47068/5.8941 |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
22-Feb-2024 13:44:05 | 2024-02-22 18:44:06 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
22-Feb-2024 13:44:06 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
22-Feb-2024 13:44:06 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
22-Feb-2024 13:44:06 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
22-Feb-2024 13:44:06 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
22-Feb-2024 13:44:06 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
22-Feb-2024 13:44:06 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
22-Feb-2024 13:44:06 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
22-Feb-2024 13:44:06 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
22-Feb-2024 13:44:06 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
22-Feb-2024 13:44:06 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.350626/0.604424/0.974388 |
22-Feb-2024 13:44:06 | 2024-02-22 18:44:06 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
22-Feb-2024 13:44:07 | 2024-02-22 18:44:08 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 21.2542/59.3511/120.719 |
22-Feb-2024 13:44:07 | 2024-02-22 18:44:08 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
22-Feb-2024 13:44:07 | 2024-02-22 18:44:08 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.382806/0.598119/0.941571 |
22-Feb-2024 13:44:07 | 2024-02-22 18:44:08 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:09 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 20.0637/57.2112/118.101 |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:09 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:09 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:09 INFO BJonesPoly::selfSolveOne() THIS IS THE NEW MULTI-SPW-FLEXIBLE VERSION |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:09 INFO BJonesPoly::selfSolveOne() Fitting bandpass amplitude and phase polynomials. |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:09 INFO BJonesPoly::selfSolveOne() Polynomial degree for amplitude is 5 |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:09 INFO BJonesPoly::selfSolveOne() Polynomial degree for phase is 7 |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:09 INFO BJonesPoly::selfSolveOne() Spectral grid for fit will have 63 points spaced by 24.4141 kHz. |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:09 INFO BJonesPoly::selfSolveOne() Polynomial solution will be valid over frequency range: 1.41267e+09-1.41418e+09 Hz. |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:09 INFO BJonesPoly::selfSolveOne() Total bandwidth: 1538.09 kHz. |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:09 INFO BJonesPoly::selfSolveOne() Found data for 351 baselines among 27 antennas. |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:09 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:09 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0750931/0.0978998/0.125897 |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:09 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:10 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.72932/3.98787/5.33715 |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:10 INFO BJonesPoly::selfSolveOne() Fitting amplitude polynomial. |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:10 INFO BJonesPoly::selfSolveOne() Per-baseline RMS log(Amp) statistics: (min/mean/max) = 0.0658572/0.0972125/0.140794 |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:10 INFO BJonesPoly::selfSolveOne() Fitting phase polynomial. |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:10 INFO BJonesPoly::selfSolveOne() Per baseline RMS phase (deg) statistics: (min/mean/max) = 2.97943/3.97841/5.72903 |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:10 INFO BJonesPoly::selfSolveOne() Normalizing antenna-based solutions. |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:10 INFO BJonesPoly::updateCalTable() Storing calibration in table bpoly |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:10 INFO Calibrater::solve Found good BPOLY solutions in 7 slots. |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:10 INFO calibrater::solve Finished solving. |
22-Feb-2024 13:44:09 | 2024-02-22 18:44:10 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
22-Feb-2024 13:44:09 | test_tool_calibrater.py::calibrater_test::test_solveBandpass |
22-Feb-2024 13:44:09 | Check that solve band poly creates the output table |
22-Feb-2024 13:44:09 | PASSED |
22-Feb-2024 13:44:09 | |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO calibrater::open Opening MS: ngc5921.ms for calibration. |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO Clearing all model records in MS header. |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO VisSetUtil::initScrCols Initialized 22653 rows. |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO Calibrater:: Initializing nominal selection to the whole MS. |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO calibrater::setsolvegainspline Beginning setsolvegainspline--(MSSelection version)------- |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO Calibrater::setsolvegainspline Arranging to SOLVE: |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO Calibrater::setsolvegainspline . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO calibrater::solve Beginning solve----------------------------- |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO Calibrater::solve The following calibration terms are arranged for apply: |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO Calibrater::solve . (None) |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO Calibrater::solve The following calibration term is arranged for solve: |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO Calibrater::solve . GSPLINE: table=gainspline append=false solint=inf refantmode='flex' refant='none' minsnr=0 apmode=AMP solnorm=false |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO GJonesSpline::solve() Fitting time-dependent cubic splines. |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO GJonesSpline::solve() Solving for phase splines with splinetime= 10800 |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO GJonesSpline::solve() Solving for amplitude splines with splinetime= 10800 |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO GJonesSpline::solve() Accumulating data for: field= 1331+30500002_0, spw= 0, nchan= 63 |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO GJonesSpline::solve() Accumulating data for: field= 1445+09900002_0, spw= 0, nchan= 63 |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:10 INFO GJonesSpline::solve() Accumulating data for: field= N5921_2, spw= 0, nchan= 63 |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:11 INFO GJonesSpline::solve() Number of timestamps in data = 60 |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:11 INFO GJonesSpline::getKnots() Gridded splinetime = 5280 sec. |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:11 INFO GJonesSpline::solve() Number of cubic spline control points = 4 |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:11 INFO GJonesSpline::solve() Number of cubic spline knots = 8 |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:11 INFO GJonesSpline::solve() Number of cubic spline segments = 1 |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:11 INFO GJonesSpline::solve() Fitting amplitude spline. |
22-Feb-2024 13:44:10 | test_tool_calibrater.py::calibrater_test::test_solveGainspline DPBTRF ;problem leading minor 23 |
22-Feb-2024 13:44:10 | DPBTRF ;problem leading minor 23 |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:11 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline. |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:11 INFO GJonesSpline::solve() Fitting phase spline. |
22-Feb-2024 13:44:10 | DPBTRF ;problem leading minor 22 |
22-Feb-2024 13:44:10 | DPBTRF ;problem leading minor 22 |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:11 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:11 INFO calibrater::solve Finished solving. |
22-Feb-2024 13:44:10 | 2024-02-22 18:44:11 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
22-Feb-2024 13:44:10 | |
22-Feb-2024 13:44:10 | Check that solve gain spline creates the output table |
22-Feb-2024 13:44:10 | PASSED |
22-Feb-2024 13:44:10 | |
22-Feb-2024 13:44:11 | 2024-02-22 18:44:11 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
22-Feb-2024 13:44:11 | 2024-02-22 18:44:11 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
22-Feb-2024 13:44:11 | 2024-02-22 18:44:11 INFO Clearing all model records in MS header. |
22-Feb-2024 13:44:11 | 2024-02-22 18:44:11 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
22-Feb-2024 13:44:12 | 2024-02-22 18:44:12 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
22-Feb-2024 13:44:12 | 2024-02-22 18:44:13 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
22-Feb-2024 13:44:12 | 2024-02-22 18:44:13 INFO Calibrater:: Initializing nominal selection to the whole MS. |
22-Feb-2024 13:44:12 | 2024-02-22 18:44:13 INFO calibrater::specifycal Beginning specifycal----------------------- |
22-Feb-2024 13:44:12 | 2024-02-22 18:44:13 INFO Creating G Jones table from specified parameters. |
22-Feb-2024 13:44:12 | 2024-02-22 18:44:13 INFO Generating 'G' corrections. |
22-Feb-2024 13:44:12 | 2024-02-22 18:44:13 INFO Specified parameter(s) (per spw and pol) repeated on all antennas. |
22-Feb-2024 13:44:12 | 2024-02-22 18:44:13 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations. |
22-Feb-2024 13:44:12 | 2024-02-22 18:44:13 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9]) |
22-Feb-2024 13:44:12 | 2024-02-22 18:44:13 INFO Writing solutions to table: testcalout.cal |
22-Feb-2024 13:44:12 | 2024-02-22 18:44:13 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
22-Feb-2024 13:44:12 | test_tool_calibrater.py::calibrater_test::test_specifyCal |
22-Feb-2024 13:44:12 | Check that specifycal can set values for specific spws and antennas |
22-Feb-2024 13:44:12 | PASSED |
22-Feb-2024 13:44:12 | |
22-Feb-2024 13:44:13 | 2024-02-22 18:44:13 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator. |
22-Feb-2024 13:44:13 | 2024-02-22 18:44:13 INFO calibrater::open ****Using OLD VI-driven calibrater tool**** |
22-Feb-2024 13:44:13 | 2024-02-22 18:44:13 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
22-Feb-2024 13:44:13 | 2024-02-22 18:44:13 INFO Clearing all model records in MS header. |
22-Feb-2024 13:44:13 | 2024-02-22 18:44:13 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:14 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO Calibrater:: Initializing nominal selection to the whole MS. |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)------- |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO Calibrater::setsolve Arranging to SOLVE: |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO Calibrater::state The following calibration terms are arranged for apply: |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO Calibrater::state The following calibration term is arranged for solve: |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO calibrater::solve Beginning solve----------------------------- |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO Calibrater::solve The following calibration terms are arranged for apply: |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO Calibrater::solve The following calibration term is arranged for solve: |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false |
22-Feb-2024 13:44:14 | 2024-02-22 18:44:15 INFO Solving for Mf Mueller |
22-Feb-2024 13:44:15 | 2024-02-22 18:44:15 INFO For solint = inf, found 84 solution intervals. |
22-Feb-2024 13:44:16 | 2024-02-22 18:44:17 INFO Found good Mf Mueller solutions in 84 intervals. |
22-Feb-2024 13:44:16 | 2024-02-22 18:44:17 INFO Writing solutions to table: output.ms |
22-Feb-2024 13:44:16 | 2024-02-22 18:44:17 INFO calibrater::solve Finished solving. |
22-Feb-2024 13:44:16 | 2024-02-22 18:44:17 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator. |
22-Feb-2024 13:44:16 | test_tool_calibrater.py::calibrater_test::test_standardPath |
22-Feb-2024 13:44:16 | open setapply setsolve state solve close |
22-Feb-2024 13:44:16 | PASSED |
22-Feb-2024 13:44:16 | |
22-Feb-2024 13:44:17 | 2024-02-22 18:44:17 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
22-Feb-2024 13:44:17 | 2024-02-22 18:44:17 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
22-Feb-2024 13:44:17 | 2024-02-22 18:44:17 INFO Clearing all model records in MS header. |
22-Feb-2024 13:44:17 | 2024-02-22 18:44:17 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:18 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO Calibrater:: Initializing nominal selection to the whole MS. |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO name:: No table opened. |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: The Table Cache has the following 16 entries: |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: 0: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms" |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: 1: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA" |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: 2: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION" |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: 3: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED" |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: 4: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD" |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: 5: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD" |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: 6: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY" |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: 7: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION" |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: 8: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING" |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: 9: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION" |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: 10: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR" |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: 11: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE" |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: 12: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW" |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: 13: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE" |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: 14: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL" |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: 15: "/home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER" |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO name:: No table opened. |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
22-Feb-2024 13:44:18 | test_tool_calibrater.py::calibrater_test::test_takesMs |
22-Feb-2024 13:44:18 | Check that the calibrater tool can open and close an MS |
22-Feb-2024 13:44:18 | PASSED |
22-Feb-2024 13:44:18 | |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO calibrater::open ****Using NEW VI2-driven calibrater tool**** |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration. |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO Clearing all model records in MS header. |
22-Feb-2024 13:44:18 | 2024-02-22 18:44:19 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s). |
22-Feb-2024 13:44:20 | 2024-02-22 18:44:20 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity). |
22-Feb-2024 13:44:20 | 2024-02-22 18:44:20 INFO VisSetUtil::initScrCols Initialized 328860 rows. |
22-Feb-2024 13:44:20 | 2024-02-22 18:44:20 INFO Calibrater:: Initializing nominal selection to the whole MS. |
22-Feb-2024 13:44:20 | 2024-02-22 18:44:20 INFO calibrater::setapply Beginning setapply--(MSSelection version)------- |
22-Feb-2024 13:44:20 | 2024-02-22 18:44:20 INFO Calibrater::setapply(type, applypar) Arranging to APPLY: |
22-Feb-2024 13:44:20 | 2024-02-22 18:44:21 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
22-Feb-2024 13:44:20 | 2024-02-22 18:44:21 INFO calibrater::correct Beginning correct--------------------------- |
22-Feb-2024 13:44:20 | 2024-02-22 18:44:21 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply: |
22-Feb-2024 13:44:20 | 2024-02-22 18:44:21 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false |
22-Feb-2024 13:44:23 | 2024-02-22 18:44:23 INFO calibrater::correct Finished correcting. |
22-Feb-2024 13:44:23 | 2024-02-22 18:44:23 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator. |
22-Feb-2024 13:44:23 | test_tool_calibrater.py::calibrater_test::test_writeToCorrected |
22-Feb-2024 13:44:23 | Check that the tool writes to the CORRECTED_DATA column |
22-Feb-2024 13:44:23 | PASSED |
22-Feb-2024 13:44:23 | |
22-Feb-2024 13:44:23 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml - |
22-Feb-2024 13:44:23 | =================== 24 passed, 1 warning in 98.29s (0:01:38) =================== |
22-Feb-2024 13:44:23 | ============================= test session starts ============================== |
22-Feb-2024 13:44:23 | platform linux -- Python 3.8.7, pytest-8.0.1, pluggy-1.4.0 -- /home/casatest/venv/bin/python3.8 |
22-Feb-2024 13:44:23 | cachedir: .pytest_cache |
22-Feb-2024 13:44:23 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_measures |
22-Feb-2024 13:44:23 | configfile: pytest.ini |
22-Feb-2024 13:44:24 | collecting ... collected 3 items |
22-Feb-2024 13:44:24 | |
22-Feb-2024 13:44:24 | |
22-Feb-2024 13:44:24 | test_tool_measures.py::me_test_cometdist::test_cometdist |
22-Feb-2024 13:44:24 | Is the distance to Ganymede just right? |
22-Feb-2024 13:44:24 | PASSED |
22-Feb-2024 13:44:24 | |
22-Feb-2024 13:44:24 | test_tool_measures.py::me_test_cometangdiam::test_cometangdiam |
22-Feb-2024 13:44:24 | Is Ganymede's angular diameter correct? |
22-Feb-2024 13:44:24 | PASSED |
22-Feb-2024 13:44:24 | |
22-Feb-2024 13:44:24 | test_tool_measures.py::me_test_shift::test_shift |
22-Feb-2024 13:44:24 | Test me.shift |
22-Feb-2024 13:44:24 | PASSED |
22-Feb-2024 13:44:24 | |
22-Feb-2024 13:44:24 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_measures/nose.xml - |
22-Feb-2024 13:44:24 | ========================= 3 passed, 1 warning in 0.47s ========================= |
22-Feb-2024 13:44:24 | ============================= test session starts ============================== |
22-Feb-2024 13:44:24 | platform linux -- Python 3.8.7, pytest-8.0.1, pluggy-1.4.0 -- /home/casatest/venv/bin/python3.8 |
22-Feb-2024 13:44:24 | cachedir: .pytest_cache |
22-Feb-2024 13:44:24 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose |
22-Feb-2024 13:44:24 | configfile: pytest.ini |
22-Feb-2024 13:44:25 | collecting ... collected 6 items |
22-Feb-2024 13:44:25 | |
22-Feb-2024 13:44:25 | |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO SubImageFactory::createImage Creating image 'blahxx.im' of shape [1536, 1536, 1, 2] |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO name:: No table opened. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO name:: No table opened. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:25 | test_tool_image_transpose.py::ia_transpose_test::test_cas_2364 |
22-Feb-2024 13:44:25 | test CAS-2364 fix |
22-Feb-2024 13:44:25 | PASSED |
22-Feb-2024 13:44:25 | |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE image::open (file src/tools/image/image_cmpt.cc, line 4208) Exception Reported: Exception: File name is empty. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE image::open (file src/tools/image/image_cmpt.cc, line 4208)+ ... thrown by static void casa::ImageFactory::_checkInfile(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 371 |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE ImageTransposer::_getOrder Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-02-22 18:44:25 SEVERE ImageTransposer::_getOrder Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE ImageTransposer::_getOrder Axis number 0 specified multiple times in order parameter 10 . It can only be specified once. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-02-22 18:44:25 SEVERE ImageTransposer::_getOrder Axis number 0 specified multiple times in order parameter 10 . It can only be specified once. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665) Image has 3 axes but 2 were given. Number of given axes must match the number of image axes |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-02-22 18:44:25 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665) Image has 3 axes but 2 were given. Number of given axes must match the number of image axes |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-02-22 18:44:25 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE ImageTransposer::_getOrder Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-02-22 18:44:25 SEVERE ImageTransposer::_getOrder Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665) Image has 3 axes but 4 were given. Number of given axes must match the number of image axes |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-02-22 18:44:25 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665) Image has 3 axes but 4 were given. Number of given axes must match the number of image axes |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-02-22 18:44:25 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665) No axis matches requested axis s. Image axis names are [right ascension, declination, frequency] |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-02-22 18:44:25 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665) No axis matches requested axis s. Image axis names are [right ascension, declination, frequency] |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665) Ambiguous axis specification. Both r and r match image axis name right ascension |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-02-22 18:44:25 SEVERE CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665) Ambiguous axis specification. Both r and r match image axis name right ascension |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 SEVERE image::transpose (file src/tools/image/image_cmpt.cc, line 6478) Exception Reported: 2024-02-22 18:44:25 SEVERE ImageTransposer::_getOrder Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO name:: No table opened. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:25 | test_tool_image_transpose.py::ia_transpose_test::test_exceptions |
22-Feb-2024 13:44:25 | imtrans: Test various exception cases |
22-Feb-2024 13:44:25 | PASSED |
22-Feb-2024 13:44:25 | |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO ImageFactory::createImage Created Temp image of shape [10, 10, 4, 10] with float valued pixels. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO ::::ImageFactory::createImage Created Temp image of shape [10, 10, 4, 10] with float valued pixels. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO ::::image::fromshape Ran ia.fromshape |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO ::::image::fromshape ia.fromshape(outfile="", shape=[10,10,4,10], csys={...}, linear=false, overwrite=false, log=true, type="f") |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO ::::image::transpose Ran ia.transpose |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO ::::image::transpose ia.transpose(outfile="", order="3210") |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO name:: No table opened. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:25 | test_tool_image_transpose.py::ia_transpose_test::test_history |
22-Feb-2024 13:44:25 | Test history records are written |
22-Feb-2024 13:44:25 | PASSED |
22-Feb-2024 13:44:25 | |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO ImageFactory::createImage Created Temp image of shape [10, 20, 30] with float valued pixels. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO image::_casaQuantityFromVar Will use values specified in major, minor, pa to set beam |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO BeamManipulator::set Setting (global) restoring beam. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO BeamManipulator::set Beam parameters: Major : 4 arcmin |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO BeamManipulator::set+ Minor : 3 arcmin |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO BeamManipulator::set+ Position Angle : 0 deg |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO name:: No table opened. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:25 | test_tool_image_transpose.py::ia_transpose_test::test_imageinfo |
22-Feb-2024 13:44:25 | Verify image info is copied |
22-Feb-2024 13:44:25 | PASSED |
22-Feb-2024 13:44:25 | |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO SubImageFactory::createImage Creating image 'straight_copy_0' of shape [5, 6, 7] |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:25 INFO SubImageFactory::createImage Creating image 'straight_copy_1' of shape [5, 6, 7] |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:26 INFO SubImageFactory::createImage Creating image 'straight_copy_2' of shape [5, 6, 7] |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:26 INFO ImageTransposer::transpose Old to new axis mapping is [0, 1, 2] |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:26 INFO SubImageFactory::createImage Creating image 'straight_copy_3' of shape [5, 6, 7] |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:26 INFO ImageTransposer::transpose Old to new axis mapping is [0, 1, 2] |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:26 INFO name:: No table opened. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:26 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:25 | test_tool_image_transpose.py::ia_transpose_test::test_straight_copy |
22-Feb-2024 13:44:25 | No actual transposing |
22-Feb-2024 13:44:25 | PASSED |
22-Feb-2024 13:44:25 | |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:26 INFO SubImageFactory::createImage Creating image 'transpose_0' of shape [6, 7, 5] |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:26 INFO SubImageFactory::createImage Creating image 'transpose_1' of shape [6, 7, 5] |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:26 INFO SubImageFactory::createImage Creating image 'transpose_2' of shape [6, 7, 5] |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:26 INFO ImageTransposer::transpose Old to new axis mapping is [1, 2, 0] |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:26 INFO ImageTransposer::transpose Old to new axis mapping is [1, 2, 0] |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:26 INFO SubImageFactory::createImage Creating image 'transpose_3' of shape [6, 7, 5] |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:26 INFO ImageTransposer::transpose Old to new axis mapping is [1, 2, 0] |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:26 INFO ImageTransposer::transpose Old to new axis mapping is [1, 2, 0] |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:26 INFO name:: No table opened. |
22-Feb-2024 13:44:25 | 2024-02-22 18:44:26 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:25 | test_tool_image_transpose.py::ia_transpose_test::test_transpose |
22-Feb-2024 13:44:25 | Test transposing |
22-Feb-2024 13:44:25 | PASSED |
22-Feb-2024 13:44:25 | |
22-Feb-2024 13:44:25 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_transpose/nose.xml - |
22-Feb-2024 13:44:25 | ========================= 6 passed, 1 warning in 1.23s ========================= |
22-Feb-2024 13:44:26 | ============================= test session starts ============================== |
22-Feb-2024 13:44:26 | platform linux -- Python 3.8.7, pytest-8.0.1, pluggy-1.4.0 -- /home/casatest/venv/bin/python3.8 |
22-Feb-2024 13:44:26 | cachedir: .pytest_cache |
22-Feb-2024 13:44:26 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims |
22-Feb-2024 13:44:26 | configfile: pytest.ini |
22-Feb-2024 13:44:26 | collecting ... collected 1 item |
22-Feb-2024 13:44:26 | |
22-Feb-2024 13:44:26 | |
22-Feb-2024 13:44:28 | 2024-02-22 18:44:28 INFO ms::createmultims Copying subtables from part1.ms to the other MMS members. |
22-Feb-2024 13:44:34 | 2024-02-22 18:44:35 INFO name:: No table opened. |
22-Feb-2024 13:44:34 | 2024-02-22 18:44:35 INFO name:: No table opened. |
22-Feb-2024 13:44:34 | test_tool_ms_createmultims.py::test_createmultims::test1 |
22-Feb-2024 13:44:34 | Test_createmultims 1: 4 parts, same sources but different spws |
22-Feb-2024 13:44:34 | Copying part1.ms |
22-Feb-2024 13:44:34 | Copying part2-mod.ms |
22-Feb-2024 13:44:34 | Copying part2-mod2.ms |
22-Feb-2024 13:44:34 | Copying part2.ms |
22-Feb-2024 13:44:34 | Copying part3.ms |
22-Feb-2024 13:44:34 | Copying part4.ms |
22-Feb-2024 13:44:34 | PASSED |
22-Feb-2024 13:44:34 | |
22-Feb-2024 13:44:34 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_createmultims/nose.xml - |
22-Feb-2024 13:44:34 | ========================= 1 passed, 1 warning in 8.59s ========================= |
22-Feb-2024 13:44:35 | ============================= test session starts ============================== |
22-Feb-2024 13:44:35 | platform linux -- Python 3.8.7, pytest-8.0.1, pluggy-1.4.0 -- /home/casatest/venv/bin/python3.8 |
22-Feb-2024 13:44:35 | cachedir: .pytest_cache |
22-Feb-2024 13:44:35 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol |
22-Feb-2024 13:44:35 | configfile: pytest.ini |
22-Feb-2024 13:44:35 | collecting ... collected 17 items |
22-Feb-2024 13:44:35 | |
22-Feb-2024 13:44:35 | |
22-Feb-2024 13:44:35 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:35 | 2024-02-22 18:44:36 INFO imagepol::complexFractionalLinearPolarization(...) Creating image 'g' of shape [10, 10, 10, 1] |
22-Feb-2024 13:44:35 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:35 | 2024-02-22 18:44:36 INFO imagepol::complexFractionalLinearPolarization(...) Creating image 'hh' of shape [10, 10, 10, 1] |
22-Feb-2024 13:44:35 | 2024-02-22 18:44:36 SEVERE imagepol::complexfraclinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
22-Feb-2024 13:44:35 | 2024-02-22 18:44:36 SEVERE imagepol::complexfraclinpol+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
22-Feb-2024 13:44:35 | test_tool_imagepol.py::po_complexfraclinpol_test::test_multibeam |
22-Feb-2024 13:44:35 | Test multibeam images for correct behavior |
22-Feb-2024 13:44:35 | pol_eq_beams.fits |
22-Feb-2024 13:44:35 | PASSED |
22-Feb-2024 13:44:35 | |
22-Feb-2024 13:44:35 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:35 | 2024-02-22 18:44:36 INFO ImagePolProxy::complexlinpol Creating image 'g' of shape [10, 10, 10, 1] |
22-Feb-2024 13:44:35 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:35 | 2024-02-22 18:44:36 INFO ImagePolProxy::complexlinpol Creating image 'hh' of shape [10, 10, 10, 1] |
22-Feb-2024 13:44:35 | 2024-02-22 18:44:36 SEVERE imagepol::complexlinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
22-Feb-2024 13:44:35 | 2024-02-22 18:44:36 SEVERE imagepol::complexlinpol+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
22-Feb-2024 13:44:35 | 2024-02-22 18:44:36 INFO name:: No table opened. |
22-Feb-2024 13:44:35 | 2024-02-22 18:44:36 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:35 | test_tool_imagepol.py::po_complexlinpol_test::test_multibeam |
22-Feb-2024 13:44:35 | Test multibeam images for correct behavior |
22-Feb-2024 13:44:35 | PASSED |
22-Feb-2024 13:44:35 | |
22-Feb-2024 13:44:35 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:35 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::depolratio Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::depolratio+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::depolratio Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::depolratio+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
22-Feb-2024 13:44:36 | test_tool_imagepol.py::po_depolratio_test::test_multibeam |
22-Feb-2024 13:44:36 | Test multibeam images for correct behavior |
22-Feb-2024 13:44:36 | pol_eq_beams.fits |
22-Feb-2024 13:44:36 | PASSED |
22-Feb-2024 13:44:36 | |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::fourierrotationmeasure Exception Reported: 2024-02-22 18:44:36 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::fourierrotationmeasure Exception Reported: 2024-02-22 18:44:36 SEVERE imagepol::fourierRotationMeasure (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolProxy.cc, line 623) Cannot run fourierRotationMeasure on an image with multiple beams |
22-Feb-2024 13:44:36 | test_tool_imagepol.py::po_fourierrotationmeasure_test::test_multibeam |
22-Feb-2024 13:44:36 | Test multibeam images for correct behavior |
22-Feb-2024 13:44:36 | pol_eq_beams.fits |
22-Feb-2024 13:44:36 | PASSED |
22-Feb-2024 13:44:36 | |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePolarimetry::fracLinPol Debiasing with sigma = 1.0119 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | test_tool_imagepol.py::po_fraclinpol_test::test_multibeam |
22-Feb-2024 13:44:36 | Test multibeam images for correct behavior |
22-Feb-2024 13:44:36 | pol_eq_beams.fits |
22-Feb-2024 13:44:36 | PASSED |
22-Feb-2024 13:44:36 | |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePolarimetry::fracTotPol Debiasing with sigma = 1.0119 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | test_tool_imagepol.py::po_fractotpol_test::test_multibeam |
22-Feb-2024 13:44:36 | Test multibeam images for correct behavior |
22-Feb-2024 13:44:36 | pol_eq_beams.fits |
22-Feb-2024 13:44:36 | PASSED |
22-Feb-2024 13:44:36 | |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePolTask::_sigma Determined noise from V image to be 1.0119 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePolTask::_sigma Debiasing with sigma = 1.0119 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | test_tool_imagepol.py::po_linpolint_test::test_multibeam |
22-Feb-2024 13:44:36 | Test multibeam images for correct behavior |
22-Feb-2024 13:44:36 | pol_eq_beams.fits |
22-Feb-2024 13:44:36 | PASSED |
22-Feb-2024 13:44:36 | |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 WARN LinearPolarizationAngleCalculator::compute (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/LinearPolarizationAngleCalculator.cc, line 40) The input image has multiple beams. Because these beams can vary with stokes/polarization, they will not be copied to the output image |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO SubImageFactory::createImage Creating image 'g' of shape [10, 10, 10, 1] |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::linpolposang Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::linpolposang+ ... thrown by casacore::Bool casa::ImagePolTask::_checkBeams(const std::vector<casa::ImagePolTask::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolTask.cc, line: 79 |
22-Feb-2024 13:44:36 | test_tool_imagepol.py::po_linpolposang_test::test_multibeam |
22-Feb-2024 13:44:36 | Test multibeam images for correct behavior |
22-Feb-2024 13:44:36 | pol_eq_beams.fits |
22-Feb-2024 13:44:36 | PASSED |
22-Feb-2024 13:44:36 | |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFactory::createImage Created Paged image 'rm_input.im' of shape [20, 20, 4, 20] with float valued pixels. |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePol::rotationMeasure Creating image 'rm.im' of shape [20, 20] |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePol::rotationMeasure Creating image 'pa0.im' of shape [20, 20, 1] |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO image::statistics Determining stats for image rm.im |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageRegion::fromRecord Selected bounding box : |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageRegion::fromRecord+ [0, 0] to [19, 19] (00:00:40.000, -00.10.00.001 to 23:59:24.000, +00.09.00.001) |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::_logStartup Statistics calculated using Classic algorithm |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::_logStartup Regions --- |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (pixel) [blc]: [0, 0] |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::_logStartup -- top-right corner (pixel) [trc]: [19, 19] |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (world) [blcf]: 00:00:40.000, -00.10.00.001 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::_logStartup -- top-right corner (world) [trcf]: 23:59:24.000, +00.09.00.001 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO Values --- |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- number of points [npts]: 400 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- maximum value [max]: 9.60001 rad/m/m |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- minimum value [min]: 9.59997 rad/m/m |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- position of max value (pixel) [maxpos]: [3, 0] |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- position of min value (pixel) [minpos]: [1, 0] |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- position of max value (world) [maxposf]: 00:00:28.000, -00.10.00.001 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- position of min value (world) [minposf]: 00:00:36.000, -00.10.00.001 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- Sum of pixel values [sum]: 3839.99 rad/m/m |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- Sum of squared pixel values [sumsq]: 36863.9 rad/m/m.rad/m/m |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO Statistics --- |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- Mean of the pixel values [mean]: 9.59998 rad/m/m |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- Variance of the pixel values : 9.48741e-11 rad/m/m |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- Standard deviation of the Mean [sigma]: 9.74033e-06 rad/m/m |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- Root mean square [rms]: 9.59998 rad/m/m |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::statistics Sum column unit = rad/m/m |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::statistics+ Mean column unit = rad/m/m |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::statistics+ Std_dev column unit = rad/m/m |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::statistics+ Minimum column unit = rad/m/m |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::statistics+ Maximum column unit = rad/m/m |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::statistics Npts Sum Mean Rms Std_dev Minimum Maximum |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::statistics 4.000000e+02 3.839993e+03 9.599982e+00 9.599982e+00 9.740334e-06 9.599969e+00 9.600007e+00 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO deleted table /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/rm.im |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO image::statistics Determining stats for image pa0.im |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO CasacRegionManager::fromBCS Using polarizations ALL |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageRegion::fromRecord Selected bounding box : |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageRegion::fromRecord+ [0, 0, 0] to [19, 19, 0] (00:00:40.000, -00.10.00.001, Pangle to 23:59:24.000, +00.09.00.001, Pangle) |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::_logStartup Statistics calculated using Classic algorithm |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::_logStartup Regions --- |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (pixel) [blc]: [0, 0, 0] |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::_logStartup -- top-right corner (pixel) [trc]: [19, 19, 0] |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::_logStartup -- bottom-left corner (world) [blcf]: 00:00:40.000, -00.10.00.001, Pangle |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::_logStartup -- top-right corner (world) [trcf]: 23:59:24.000, +00.09.00.001, Pangle |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO Values --- |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- number of points [npts]: 400 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- maximum value [max]: 22.5001 deg |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- minimum value [min]: 22.5 deg |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- position of max value (pixel) [maxpos]: [1, 0, 0] |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- position of min value (pixel) [minpos]: [3, 0, 0] |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- position of max value (world) [maxposf]: 00:00:36.000, -00.10.00.001, Pangle |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- position of min value (world) [minposf]: 00:00:28.000, -00.10.00.001, Pangle |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- Sum of pixel values [sum]: 9000.02 deg |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- Sum of squared pixel values [sumsq]: 202501 deg.deg |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO Statistics --- |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- Mean of the pixel values [mean]: 22.5 deg |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- Variance of the pixel values : 6.26899e-10 deg |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- Standard deviation of the Mean [sigma]: 2.5038e-05 deg |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO -- Root mean square [rms]: 22.5 deg |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::statistics Sum column unit = deg |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::statistics+ Mean column unit = deg |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::statistics+ Std_dev column unit = deg |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::statistics+ Minimum column unit = deg |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::statistics+ Maximum column unit = deg |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::statistics Npts Sum Mean Rms Std_dev Minimum Maximum |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageStatsCalculator::statistics 4.000000e+02 9.000018e+03 2.250005e+01 2.250005e+01 2.503796e-05 2.249998e+01 2.250008e+01 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO deleted table /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/pa0.im |
22-Feb-2024 13:44:36 | test_tool_imagepol.py::po_rotationmeasure_test::test_algorithm |
22-Feb-2024 13:44:36 | Test rotation measure computation algorithm |
22-Feb-2024 13:44:36 | PASSED |
22-Feb-2024 13:44:36 | |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePol::rotationMeasure Creating image 'g' of shape [10, 10] |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePol::rotationMeasure Creating image 'hh' of shape [10, 10] |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::rotationmeasure Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::rotationmeasure+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
22-Feb-2024 13:44:36 | test_tool_imagepol.py::po_rotationmeasure_test::test_multibeam |
22-Feb-2024 13:44:36 | Test multibeam images for correct behavior |
22-Feb-2024 13:44:36 | PASSED |
22-Feb-2024 13:44:36 | |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
22-Feb-2024 13:44:36 | test_tool_imagepol.py::po_sigma_test::test_multibeam |
22-Feb-2024 13:44:36 | Test multibeam images for correct behavior |
22-Feb-2024 13:44:36 | pol_eq_beams.fits |
22-Feb-2024 13:44:36 | PASSED |
22-Feb-2024 13:44:36 | |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::sigmadepolratio Exception Reported: Exception: Beams or beamsets are not equal between the two images, caonnot perform calculation. |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::sigmadepolratio+ ... thrown by static void casa::ImagePolarimetry::_checkBeams(const casa::ImagePolarimetry&, const casa::ImagePolarimetry&, const casacore::Vector<casa::ImagePolarimetry::StokesTypes>&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1686 |
22-Feb-2024 13:44:36 | test_tool_imagepol.py::po_sigmadepolratio_test::test_multibeam |
22-Feb-2024 13:44:36 | Test multibeam images for correct behavior |
22-Feb-2024 13:44:36 | PASSED |
22-Feb-2024 13:44:36 | |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO imagepol::sigmaFracLinPol Creating image 'g' of shape [10, 10, 10, 1] |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::sigmafraclinpol Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::sigmafraclinpol+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
22-Feb-2024 13:44:36 | test_tool_imagepol.py::po_sigmafraclinpol_test::test_multibeam |
22-Feb-2024 13:44:36 | Test multibeam images for correct behavior |
22-Feb-2024 13:44:36 | PASSED |
22-Feb-2024 13:44:36 | |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO imagepol::sigmaFracTotPol Creating image 'g' of shape [10, 10, 10, 1] |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 WARN ImagePolarimetry::_setDoLinDoCirc (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line 272) I, Q, and U beams are not the same, cannot do linear portion |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 WARN ImagePolarimetry::_setDoLinDoCirc (file /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line 272) I and V beams are not the same, cannot do circular portion |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::sigmafractotpol Exception Reported: Exception: Can do neither linear nor circular portions. |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::sigmafractotpol+ ... thrown by void casa::ImagePolarimetry::_setDoLinDoCirc(casacore::Bool&, casacore::Bool&) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 292 |
22-Feb-2024 13:44:36 | test_tool_imagepol.py::po_sigmafractotpol_test::test_multibeam |
22-Feb-2024 13:44:36 | Test multibeam images for correct behavior |
22-Feb-2024 13:44:36 | PASSED |
22-Feb-2024 13:44:36 | |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePolarimetry::sigmaLinPolInt Determined noise from Q&U images to be |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::sigmalinpolint Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 SEVERE imagepol::sigmalinpolint+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
22-Feb-2024 13:44:36 | test_tool_imagepol.py::po_sigmalinpolint_test::test_multibeam |
22-Feb-2024 13:44:36 | Test multibeam images for correct behavior |
22-Feb-2024 13:44:36 | PASSED |
22-Feb-2024 13:44:36 | |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:36 INFO ImagePolarimetry::sigma Determined noise from V image to be 1.0119 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:37 INFO imagepol::sigmaLinPolPosAng Creating image 'g' of shape [10, 10, 10, 1] |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:37 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:37 SEVERE imagepol::sigmalinpolposang Exception Reported: Exception: Input image has multiple beams and the corresponding beams for the stokes planes necessary for this computation are not equal.. |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:37 SEVERE imagepol::sigmalinpolposang+ ... thrown by casacore::Bool casa::ImagePolarimetry::_checkBeams(const std::vector<casa::ImagePolarimetry::StokesTypes>&, casacore::Bool, casacore::Bool) const at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImagePolarimetry.cc, line: 1626 |
22-Feb-2024 13:44:36 | test_tool_imagepol.py::po_sigmalinpolposang_test::test_multibeam |
22-Feb-2024 13:44:36 | Test multibeam images for correct behavior |
22-Feb-2024 13:44:36 | PASSED |
22-Feb-2024 13:44:36 | |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:37 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:37 INFO ImagePolTask::_sigma Determined noise from V image to be 1.0119 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:37 INFO ImagePolTask::_sigma Debiasing with sigma = 1.0119 |
22-Feb-2024 13:44:36 | 2024-02-22 18:44:37 INFO ImageFITSConverter::readBeamsTable Loading multiple beams from BEAMS table |
22-Feb-2024 13:44:36 | test_tool_imagepol.py::po_totpolint_test::test_multibeam |
22-Feb-2024 13:44:36 | Test multibeam images for correct behavior |
22-Feb-2024 13:44:36 | PASSED |
22-Feb-2024 13:44:36 | |
22-Feb-2024 13:44:36 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml - |
22-Feb-2024 13:44:36 | ======================== 17 passed, 1 warning in 1.34s ========================= |
22-Feb-2024 13:44:36 | ============================= test session starts ============================== |
22-Feb-2024 13:44:36 | platform linux -- Python 3.8.7, pytest-8.0.1, pluggy-1.4.0 -- /home/casatest/venv/bin/python3.8 |
22-Feb-2024 13:44:36 | cachedir: .pytest_cache |
22-Feb-2024 13:44:36 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner |
22-Feb-2024 13:44:36 | configfile: pytest.ini |
22-Feb-2024 13:44:37 | collecting ... collected 1 item |
22-Feb-2024 13:44:37 | |
22-Feb-2024 13:44:37 | |
22-Feb-2024 13:44:39 | test_tool_msuvbinner.py::msuvbinnerTest::test_fill_1ms |
22-Feb-2024 13:44:39 | test uvgridding 1 ms onto an output grid |
22-Feb-2024 13:44:39 | PASSED |
22-Feb-2024 13:44:39 | |
22-Feb-2024 13:44:39 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msuvbinner/nose.xml - |
22-Feb-2024 13:44:39 | ========================= 1 passed, 1 warning in 2.48s ========================= |
22-Feb-2024 13:44:39 | ============================= test session starts ============================== |
22-Feb-2024 13:44:39 | platform linux -- Python 3.8.7, pytest-8.0.1, pluggy-1.4.0 -- /home/casatest/venv/bin/python3.8 |
22-Feb-2024 13:44:39 | cachedir: .pytest_cache |
22-Feb-2024 13:44:39 | rootdir: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics |
22-Feb-2024 13:44:39 | configfile: pytest.ini |
22-Feb-2024 13:44:40 | collecting ... collected 11 items |
22-Feb-2024 13:44:40 | |
22-Feb-2024 13:44:40 | |
22-Feb-2024 13:44:40 | 2024-02-22 18:44:40 INFO FITSCoordinateUtil::fromFITSHeader passing empty or nonexistant spectral Coordinate axis |
22-Feb-2024 13:44:40 | 2024-02-22 18:44:40 INFO name:: No table opened. |
22-Feb-2024 13:44:40 | 2024-02-22 18:44:40 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:40 | test_tool_image_statistics.py::ia_statistics_test::test_CAS_2195_image_can_have_linear_rather_than_direction_coordinate |
22-Feb-2024 13:44:40 | verify fix for CAS-2195, image has linear, not direction, coordinate |
22-Feb-2024 13:44:40 | PASSED |
22-Feb-2024 13:44:40 | |
22-Feb-2024 13:44:47 | ....10....20....30....40....50....60....70....80....90....100% |
22-Feb-2024 13:44:56 | 2024-02-22 18:44:56 INFO name:: No table opened. |
22-Feb-2024 13:44:56 | 2024-02-22 18:44:56 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:56 | test_tool_image_statistics.py::ia_statistics_test::test_biweight |
22-Feb-2024 13:44:56 | Test biweight algorithm CAS-11100 |
22-Feb-2024 13:44:56 | PASSED |
22-Feb-2024 13:44:56 | |
22-Feb-2024 13:44:56 | 2024-02-22 18:44:56 INFO ImageFactory::createImage Created Paged image 'chauvtest.im' of shape [107] with float valued pixels. |
22-Feb-2024 13:44:56 | 2024-02-22 18:44:56 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
22-Feb-2024 13:44:56 | 2024-02-22 18:44:56 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
22-Feb-2024 13:44:56 | 2024-02-22 18:44:56 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
22-Feb-2024 13:44:56 | 2024-02-22 18:44:56 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
22-Feb-2024 13:44:56 | 2024-02-22 18:44:56 WARN image::open (file src/tools/image/image_cmpt.cc, line 4208) Another image is already open, closing first |
22-Feb-2024 13:44:56 | 2024-02-22 18:44:57 INFO name:: No table opened. |
22-Feb-2024 13:44:56 | 2024-02-22 18:44:57 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:56 | test_tool_image_statistics.py::ia_statistics_test::test_chauvenet |
22-Feb-2024 13:44:56 | Test Chauvenet's criterion algorithm |
22-Feb-2024 13:44:56 | PASSED |
22-Feb-2024 13:44:56 | |
22-Feb-2024 13:44:56 | 2024-02-22 18:44:57 INFO ImageFactory::createImage Created Paged image 'fhtest.im' of shape [100] with float valued pixels. |
22-Feb-2024 13:44:56 | 2024-02-22 18:44:57 INFO name:: No table opened. |
22-Feb-2024 13:44:56 | 2024-02-22 18:44:57 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:56 | test_tool_image_statistics.py::ia_statistics_test::test_fithalf |
22-Feb-2024 13:44:56 | Test fit to half algorithm |
22-Feb-2024 13:44:56 | PASSED |
22-Feb-2024 13:44:56 | |
22-Feb-2024 13:44:56 | 2024-02-22 18:44:57 INFO ImageFactory::createImage Created Paged image 'hftest.im' of shape [100] with float valued pixels. |
22-Feb-2024 13:44:56 | 2024-02-22 18:44:57 INFO name:: No table opened. |
22-Feb-2024 13:44:56 | 2024-02-22 18:44:57 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:56 | test_tool_image_statistics.py::ia_statistics_test::test_hingesfences |
22-Feb-2024 13:44:56 | Test hinges-fences algorithm |
22-Feb-2024 13:44:56 | PASSED |
22-Feb-2024 13:44:56 | |
22-Feb-2024 13:44:56 | 2024-02-22 18:44:57 INFO ImageFactory::createImage Created Paged image 'internally_excluded_region.im' of shape [100, 200, 110, 4] with float valued pixels. |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:57 INFO CasacRegionManager::fromBCS No directional region specified. Using full positional plane. |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:57 INFO CasacRegionManager::fromBCS Using channel range(s) |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:57 INFO CasacRegionManager::fromBCS Using polarizations IV |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:57 WARN Stokes cannot be determined because this region type is not handled yet. But chances are very good this is no need to be alarmed. |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:57 INFO name:: No table opened. |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:57 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:57 | test_tool_image_statistics.py::ia_statistics_test::test_internal_region_exclusion |
22-Feb-2024 13:44:57 | Verify data not returned for internally excluded regions |
22-Feb-2024 13:44:57 | PASSED |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO name:: No table opened. |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:57 | test_tool_image_statistics.py::ia_statistics_test::test_logfile_param |
22-Feb-2024 13:44:57 | test logfile |
22-Feb-2024 13:44:57 | i 1 |
22-Feb-2024 13:44:57 | i 2 |
22-Feb-2024 13:44:57 | PASSED |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Image name : moment_map.im |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Object name : G11.92 |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Image type : PagedImage |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Image quantity : Intensity |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Pixel mask(s) : mask0 |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Region(s) : None |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Image units : Jy/beam.km/s |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Restoring Beam : 3.15627 arcsec, 1.80243 arcsec, 58.3141 deg |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Direction reference : J2000 |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Spectral reference : LSRK |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Velocity type : RADIO |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Rest frequency : 2.30538e+11 Hz |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Pointing center : 18:13:58.097081 -18.54.16.695951 |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Telescope : SMA |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Observer : SMA |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Date observation : 2008/06/23/00:00:00.000000 |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Axis Coord Type Name Proj Shape Tile Coord value at pixel Coord incr Units |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ -------------------------------------------------------------------------------------------------- |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ 0 0 Direction Right Ascension SIN 256 256 18:13:58.097 128.00 -4.000000e-01 arcsec |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ 1 0 Direction Declination SIN 256 256 -18.54.16.696 128.00 4.000000e-01 arcsec |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ 2 1 Stokes Stokes 1 1 I |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ 3 2 Spectral Frequency 1 1 2.30392e+11 -37.00 2.536257562e+06 Hz |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageMetaData::summary+ Velocity 189.963 -37.00 -3.298159e+00 km/s |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO name:: No table opened. |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:57 | test_tool_image_statistics.py::ia_statistics_test::test_moment_map_flux |
22-Feb-2024 13:44:57 | Test 1: verify moment maps can have flux densities computed in statistics |
22-Feb-2024 13:44:57 | PASSED |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageFactory::createImage Created Paged image 'test011.im' of shape [10, 10, 10] with float valued pixels. |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO CasacRegionManager::fromBCS Using specified box(es) 0, 0, 2, 2, 4, 4, 6, 6 |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO name:: No table opened. |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:57 | test_tool_image_statistics.py::ia_statistics_test::test_multiple_region_support |
22-Feb-2024 13:44:57 | test multiple region support |
22-Feb-2024 13:44:57 | PASSED |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO name:: No table opened. |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:57 | test_tool_image_statistics.py::ia_statistics_test::test_specifying_axes_param |
22-Feb-2024 13:44:57 | choose axes works |
22-Feb-2024 13:44:57 | PASSED |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageFactory::createImage Created Paged image 'maskim' of shape [200, 200, 1, 1] with float valued pixels. |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO ImageFactory::createImage Created Paged image 'tmp.im' of shape [200, 200, 1, 20] with float valued pixels. |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 SEVERE image::statistics (file src/tools/image/image_cmpt.cc, line 5995) Exception Reported: The input image shape ([200, 200, 1, 20]) and mask shape ([200, 200, 1, 1]) are different, and it was specified that the mask should not be extended, so the mask cannot be applied to the (sub)image. Specifying that the mask should be extended may resolve the issue at File: /source/casainstall/include/casacpp/imageanalysis/ImageAnalysis/SubImageFactory.tcc, line: 306 |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO name:: No table opened. |
22-Feb-2024 13:44:57 | 2024-02-22 18:44:58 INFO showcache:: The Table Cache is empty. |
22-Feb-2024 13:44:57 | test_tool_image_statistics.py::ia_statistics_test::test_stretch |
22-Feb-2024 13:44:57 | Test stretch parameter |
22-Feb-2024 13:44:57 | PASSED |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | - generated xml file: /home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_statistics/nose.xml - |
22-Feb-2024 13:44:57 | ======================== 11 passed, 1 warning in 18.10s ======================== |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
22-Feb-2024 13:44:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_vpmanager/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_vpmanager/ |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse/ |
22-Feb-2024 13:44:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_collapse/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_collapse/ |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calanalysis/ |
22-Feb-2024 13:44:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calanalysis |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calanalysis/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calanalysis/ |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
22-Feb-2024 13:44:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_statwt/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_statwt/ |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
22-Feb-2024 13:44:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_rebin/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_rebin/ |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_logsink/ |
22-Feb-2024 13:44:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_logsink |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_logsink/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_logsink/ |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms/ |
22-Feb-2024 13:44:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms/ |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
22-Feb-2024 13:44:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_sdm/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_sdm/ |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/ |
22-Feb-2024 13:44:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_simulator/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_simulator/ |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv/ |
22-Feb-2024 13:44:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_pv/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_pv/ |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
22-Feb-2024 13:44:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_calibrater/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_calibrater/ |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_measures/ |
22-Feb-2024 13:44:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_measures |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_measures/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_measures/ |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
22-Feb-2024 13:44:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_transpose/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_transpose/ |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
22-Feb-2024 13:44:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_ms_createmultims/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_ms_createmultims/ |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/ |
22-Feb-2024 13:44:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_imagepol/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_imagepol/ |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
22-Feb-2024 13:44:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_msuvbinner/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_msuvbinner/ |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Setting Working Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics/ |
22-Feb-2024 13:44:57 | Test Directory: /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics |
22-Feb-2024 13:44:57 | |
22-Feb-2024 13:44:57 | Running Command: pytest --junitxml=/home/casatest/casa6/casatestutils/nosedir/xml/test_tool_image_statistics/nose.xml -s --disable-pytest-warnings --verbose -ra --tb=short /home/casatest/casa6/casatestutils/nosedir/test_tool_image_statistics/ |
22-Feb-2024 13:44:58 | total 175140 |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci 15001 128633 Feb 22 18:30 casatestutils-6.6.4.3a14235.dev9+dirty-py3-none-any.whl |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci 15001 179045146 Feb 22 18:30 casatools-6.6.4.3a14235.dev9+dirty-cp38-cp38-manylinux_2_28_x86_64.whl |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 4314 Feb 22 18:44 test_tool_agentflagger.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 980 Feb 22 18:44 test_tool_calanalysis.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 2630 Feb 22 18:44 test_tool_calibrater.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 661 Feb 22 18:44 test_tool_componentlist.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 7441 Feb 22 18:44 test_tool_coordsys.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 12801 Feb 22 18:44 test_tool_image.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 2194 Feb 22 18:44 test_tool_image_collapse.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 1022 Feb 22 18:44 test_tool_image_deviation.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 2549 Feb 22 18:44 test_tool_image_fitprofile.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 1152 Feb 22 18:44 test_tool_image_pbcor.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 857 Feb 22 18:44 test_tool_image_pv.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 980 Feb 22 18:44 test_tool_image_rebin.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 1310 Feb 22 18:44 test_tool_image_regrid.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 1507 Feb 22 18:44 test_tool_image_statistics.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 739 Feb 22 18:44 test_tool_image_subimage.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 864 Feb 22 18:44 test_tool_image_transpose.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 1940 Feb 22 18:44 test_tool_imagepol.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 813 Feb 22 18:44 test_tool_linearmosaic.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 642 Feb 22 18:44 test_tool_logsink.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 523 Feb 22 18:44 test_tool_measures.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 5198 Feb 22 18:44 test_tool_ms.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 341 Feb 22 18:44 test_tool_ms_createmultims.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 2069 Feb 22 18:44 test_tool_ms_statwt.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 8486 Feb 22 18:44 test_tool_msmetadata.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 333 Feb 22 18:44 test_tool_msuvbinner.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 1145 Feb 22 18:44 test_tool_quanta.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 3951 Feb 22 18:44 test_tool_regionmanager.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 2046 Feb 22 18:44 test_tool_sdm.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 2070 Feb 22 18:44 test_tool_sdm_toms.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 422 Feb 22 18:44 test_tool_simulator.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 1337 Feb 22 18:44 test_tool_table.xml |
22-Feb-2024 13:44:58 | -rw-r--r-- 1 casaci root 1691 Feb 22 18:44 test_tool_vpmanager.xml |
22-Feb-2024 13:44:59 | Finished task 'Test wheel' with result: Success |
22-Feb-2024 13:44:59 | Starting task 'Tar work directory' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
22-Feb-2024 13:44:59 | Beginning to execute external process for build 'CASA - CMake CI Build - CAS-14235 - Test Tools Many Linux 2.28 #18 (CASA-CMAKECI106-TTOML228-18)' ... running command line: /export/home/cbt-el7-1/bamboo-home/temp/CASA-CMAKECI106-TTOML228-18-ScriptBuildTask-7904113760028141285.sh ... in: /export/home/cbt-el7-1/bamboo-home/xml-data/build-dir/CASA-CMAKECI106-TTOML228 |
22-Feb-2024 13:44:59 | Package working directory |
22-Feb-2024 13:44:59 | tar: work: Cannot stat: No such file or directory |
22-Feb-2024 13:44:59 | tar: Exiting with failure status due to previous errors |
22-Feb-2024 13:44:59 | total 175144 |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci 15001 128633 Feb 22 18:30 casatestutils-6.6.4.3a14235.dev9+dirty-py3-none-any.whl |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci 15001 179045146 Feb 22 18:30 casatools-6.6.4.3a14235.dev9+dirty-cp38-cp38-manylinux_2_28_x86_64.whl |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 4314 Feb 22 18:44 test_tool_agentflagger.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 980 Feb 22 18:44 test_tool_calanalysis.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 2630 Feb 22 18:44 test_tool_calibrater.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 661 Feb 22 18:44 test_tool_componentlist.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 7441 Feb 22 18:44 test_tool_coordsys.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 12801 Feb 22 18:44 test_tool_image.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 2194 Feb 22 18:44 test_tool_image_collapse.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 1022 Feb 22 18:44 test_tool_image_deviation.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 2549 Feb 22 18:44 test_tool_image_fitprofile.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 1152 Feb 22 18:44 test_tool_image_pbcor.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 857 Feb 22 18:44 test_tool_image_pv.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 980 Feb 22 18:44 test_tool_image_rebin.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 1310 Feb 22 18:44 test_tool_image_regrid.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 1507 Feb 22 18:44 test_tool_image_statistics.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 739 Feb 22 18:44 test_tool_image_subimage.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 864 Feb 22 18:44 test_tool_image_transpose.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 1940 Feb 22 18:44 test_tool_imagepol.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 813 Feb 22 18:44 test_tool_linearmosaic.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 642 Feb 22 18:44 test_tool_logsink.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 523 Feb 22 18:44 test_tool_measures.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 5198 Feb 22 18:44 test_tool_ms.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 341 Feb 22 18:44 test_tool_ms_createmultims.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 2069 Feb 22 18:44 test_tool_ms_statwt.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 8486 Feb 22 18:44 test_tool_msmetadata.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 333 Feb 22 18:44 test_tool_msuvbinner.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 1145 Feb 22 18:44 test_tool_quanta.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 3951 Feb 22 18:44 test_tool_regionmanager.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 2046 Feb 22 18:44 test_tool_sdm.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 2070 Feb 22 18:44 test_tool_sdm_toms.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 422 Feb 22 18:44 test_tool_simulator.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 1337 Feb 22 18:44 test_tool_table.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 1691 Feb 22 18:44 test_tool_vpmanager.xml |
22-Feb-2024 13:44:59 | -rw-r--r-- 1 casaci root 45 Feb 22 18:44 work-el7-3.8.tar.gz |
22-Feb-2024 13:44:59 | Done packaging working directory |
22-Feb-2024 13:44:59 | Finished task 'Tar work directory' with result: Success |
22-Feb-2024 13:44:59 | Starting task 'Parse tests' of type 'com.atlassian.bamboo.plugins.testresultparser:task.testresultparser.junit' |
22-Feb-2024 13:44:59 | Parsing test results under /export/home/cbt-el7-1/bamboo-home/xml-data/build-dir/CASA-CMAKECI106-TTOML228... |
22-Feb-2024 13:44:59 | Finished task 'Parse tests' with result: Success |
22-Feb-2024 13:44:59 | Skipping execution of task 'Upload wheel' as it is disabled |
22-Feb-2024 13:44:59 | Starting task 'Cleanup' of type 'com.atlassian.bamboo.plugins.scripttask:task.builder.script' |
22-Feb-2024 13:44:59 | Beginning to execute external process for build 'CASA - CMake CI Build - CAS-14235 - Test Tools Many Linux 2.28 #18 (CASA-CMAKECI106-TTOML228-18)' ... running command line: /export/home/cbt-el7-1/bamboo-home/temp/CASA-CMAKECI106-TTOML228-18-ScriptBuildTask-3280595216934857355.sh ... in: /export/home/cbt-el7-1/bamboo-home/xml-data/build-dir/CASA-CMAKECI106-TTOML228 |
22-Feb-2024 13:44:59 | Starting cleanup |
22-Feb-2024 13:45:10 | wheel-container-test |
22-Feb-2024 13:45:11 | wheel-container-test |
22-Feb-2024 13:45:11 | Cleanup complete |
22-Feb-2024 13:45:11 | Finished task 'Cleanup' with result: Success |
22-Feb-2024 13:45:11 | Running post build plugin 'Docker Container Cleanup' |
22-Feb-2024 13:45:11 | Beginning to execute external process for build 'CASA - CMake CI Build - CAS-14235 - Test Tools Many Linux 2.28 #18 (CASA-CMAKECI106-TTOML228-18)' ... running command line: /bin/docker rm -f wheel-container-test ... in: /export/home/cbt-el7-1/bamboo-home/xml-data/build-dir/CASA-CMAKECI106-TTOML228 |
22-Feb-2024 13:45:11 | Error response from daemon: No such container: wheel-container-test |
22-Feb-2024 13:45:11 | Running post build plugin 'NCover Results Collector' |
22-Feb-2024 13:45:11 | Running post build plugin 'Build Results Label Collector' |
22-Feb-2024 13:45:11 | Running post build plugin 'Clover Results Collector' |
22-Feb-2024 13:45:11 | Running post build plugin 'npm Cache Cleanup' |
22-Feb-2024 13:45:11 | Running post build plugin 'Artifact Copier' |
22-Feb-2024 13:45:11 | Publishing an artifact: Workdir |
22-Feb-2024 13:45:11 | Finished publishing of artifact Non required job artifact Http Compression On : [Workdir], patterns: [work*.tar.gz] anchored at: [wheeldirectory/] in 108.1 ms |
22-Feb-2024 13:45:11 | Publishing an artifact: Tests |
22-Feb-2024 13:45:12 | Finished publishing of artifact Non required job artifact Http Compression On : [Tests], patterns: [*.xml] anchored at: [wheeldirectory/] in 279.6 ms |
22-Feb-2024 13:45:12 | Publishing an artifact: xml Directories |
22-Feb-2024 13:45:12 | Finished publishing of artifact Non required job artifact Http Compression On : [xml Directories], patterns: [**/*.xml] anchored at: [wheeldirectory/] in 170.1 ms |
22-Feb-2024 13:45:12 | Finalising the build... |
22-Feb-2024 13:45:12 | Stopping timer. |
22-Feb-2024 13:45:12 | Build CASA-CMAKECI106-TTOML228-18 completed. |
22-Feb-2024 13:45:12 | Running on server: post build plugin 'Build Hanging Detection Configuration' |
22-Feb-2024 13:45:12 | Running on server: post build plugin 'NCover Results Collector' |
22-Feb-2024 13:45:12 | Running on server: post build plugin 'Build Labeller' |
22-Feb-2024 13:45:12 | Running on server: post build plugin 'Clover Delta Calculator' |
22-Feb-2024 13:45:12 | Running on server: post build plugin 'Maven Dependencies Postprocessor' |
22-Feb-2024 13:45:12 | All post build plugins have finished |
22-Feb-2024 13:45:12 | Generating build results summary... |
22-Feb-2024 13:45:12 | Saving build results to disk... |
22-Feb-2024 13:45:12 | Store variable context... |
22-Feb-2024 13:45:12 | Finished building CASA-CMAKECI106-TTOML228-18. |