Coverage for /wheeldirectory/casa-6.7.0-12-py3.10.el8/lib/py/lib/python3.10/site-packages/casatasks/fringefit.py: 56%
27 statements
« prev ^ index » next coverage.py v7.6.4, created at 2024-10-31 19:10 +0000
1##################### generated by xml-casa (v2) from fringefit.xml #################
2##################### e6409c0f21fccc6ce2bdcdf5b41b3d7d ##############################
3from __future__ import absolute_import
4import numpy
5from casatools.typecheck import CasaValidator as _val_ctor
6_pc = _val_ctor( )
7from casatools.coercetype import coerce as _coerce
8from casatools.errors import create_error_string
9from .private.task_fringefit import fringefit as _fringefit_t
10from casatasks.private.task_logging import start_log as _start_log
11from casatasks.private.task_logging import end_log as _end_log
12from casatasks.private.task_logging import except_log as _except_log
14class _fringefit:
15 """
16 fringefit ---- Fringe fit delay and rates
19 Phase offsets, groups delays and delay rates are calculated with
20 respect to a specified referance antenna by a two-dimensional FFT and
21 subsequent least-squares optimisation.
23 Previous calibrations should be applied on the fly.
25 --------- parameter descriptions ---------------------------------------------
27 vis Name of input visibility file
28 caltable Name of output gain calibration table
29 field Select field using field id(s) or field name(s)
30 spw Select spectral window/channels
31 intent Select observing intent
32 selectdata Other data selection parameters
33 timerange Select data based on time range
34 uvrange Select data by baseline length.
35 Default = '' (all)
37 Examples:
38 uvrange='0~1000klambda'; uvrange from 0-1000 kilo-lambda
39 uvrange='>4klambda';uvranges greater than 4 kilo-lambda
40 uvrange='0~1000km'; uvrange in kilometers
41 antenna Select data based on antenna/baseline
42 scan Scan number range
43 observation Select by observation ID(s)
44 msselect Optional complex data selection (ignore for now)
45 solint Solution interval: egs. \'inf\', \'60s\' (see help)
46 combine Data axes which to combine for solve (obs, scan, spw, and/or field)
47 refant Reference antenna name(s)
48 minsnr Reject solutions below this signal-to-noise ratio (at the FFT stage)
49 zerorates Zero delay-rates in solution table
51 Write a solution table with delay-rates zeroed, for the case of
52 "manual phase calibration", so that the calibration table can be
53 applied to the full dataset without the extrapolation of a non-zero delay-rate term
54 affecting the data
55 globalsolve Refine estimates of delay and rate with global least-squares solver
56 niter Maximum number of iterations for least-squares solver
57 delaywindow Constrain FFT delay search to a window specified as a two-element list with units of nanoseconds
58 Default: [None, None]
59 Examples: [-10, 10]
60 ratewindow Constrain FFT rate search to a window specified as a two-element list with units of seconds per second
61 Default: [None, None]
62 Examples: [-1e-13, 1e-13]
63 append Append solutions to the (existing) table
64 Default: False (overwrite existing table or make
65 new table)
67 Appended solutions must be derived from the same
68 MS as the existing caltable, and solution spws
69 must have the same meta-info (according to spw
70 selection and solint) or be non-overlapping.
71 corrdepflags f False (default), if any correlation is flagged, treat all correlations in
72 the visibility vector as flagged when solving (per channel, per baseline).
73 If True, use unflagged correlations in a visibility vector, even if one or more
74 other correlations are flagged.
76 Default: False (treat correlation vectors with one or more correlations flagged as entirely flagged)
78 Traditionally, CASA has observed a strict interpretation of
79 correlation-dependent flags: if one or more correlations
80 (for any baseline and channel) is flagged, then all available
81 correlations for the same baseline and channel are
82 treated as flagged. However, it is desirable in some
83 circumstances to relax this stricture, e.g., to preserve use
84 of data from antennas with only one good polarization (e.g., one polarization
85 is bad or entirely absent). Solutions for the bad or missing polarization
86 will be rendered as flagged.
87 corrcomb Combine correlations: "all" and "none" are currently
88 supported values
89 docallib Control means of specifying the caltables
90 Default: False (Use gaintable, gainfield, interp,
91 spwmap, calwt)
92 Options: False|True
94 If True, specify a file containing cal library in
95 callib
96 callib Specify a file containing cal library directives
97 Subparameter of docallib=True
98 gaintable Gain calibration table(s) to apply on the fly
99 Default: '' (none)
100 Subparameter of docallib=False
101 Examples:
102 gaintable='ngc5921.gcal'
103 gaintable=['ngc5921.ampcal','ngc5921.phcal']
104 gainfield Select a subset of calibrators from gaintable(s)
105 Default: '' (all sources on the sky)
107 'nearest' ==> nearest (on sky) available field in
108 table otherwise, same syntax as field
110 Examples:
111 gainfield='0~2,5' means use fields 0,1,2,5
112 from gaintable
113 gainfield=['0~3','4~6'] means use field 0
114 through 3
115 interp Interpolation parameters (in time[,freq]) for each gaintable, as a list of strings.
116 Default: '' --> 'linear,linear' for all gaintable(s)
117 Options: Time: 'nearest', 'linear'
118 Freq: 'nearest', 'linear', 'cubic',
119 'spline'
120 Specify a list of strings, aligned with the list of caltable specified
121 in gaintable, that contain the required interpolation parameters
122 for each caltable.
123 * When frequency interpolation is relevant (B, Df,
124 Xf), separate time-dependent and freq-dependent
125 interp types with a comma (freq after the
126 comma).
127 * Specifications for frequency are ignored when the
128 calibration table has no channel-dependence.
129 * Time-dependent interp options ending in 'PD'
130 enable a "phase delay" correction per spw for
131 non-channel-dependent calibration types.
132 * For multi-obsId datasets, 'perobs' can be
133 appended to the time-dependent interpolation
134 specification to enforce obsId boundaries when
135 interpolating in time.
136 * For multi-scan datasets, 'perscan' can be
137 appended to the time-dependent interpolation
138 specification to enforce scan boundaries when
139 interpolating in time.
140 * Freq-dependent interp options can have 'flag' appended
141 to enforce channel-dependent flagging, and/or 'rel'
142 appended to invoke relative frequency interpolation
144 Examples:
145 interp='nearest' (in time, freq-dep will be
146 linear, if relevant)
147 interp='linear,cubic' (linear in time, cubic
148 in freq)
149 interp='linearperobs,splineflag' (linear in
150 time per obsId, spline in freq with
151 channelized flagging)
152 interp='nearest,linearflagrel' (nearest in
153 time, linear in freq with with channelized
154 flagging and relative-frequency interpolation)
155 interp=',spline' (spline in freq; linear in
156 time by default)
157 interp=['nearest,spline','linear'] (for
158 multiple gaintables)
159 spwmap Spectral window mappings to form for gaintable(s)
160 Only used if callib=False
161 default: [] (apply solutions from each calibration spw to
162 the same MS spw only)
163 Any available calibration spw can be mechanically mapped to any
164 MS spw.
165 Examples:
166 spwmap=[0,0,1,1] means apply calibration
167 from cal spw = 0 to MS spw 0,1 and cal spw 1 to MS spws 2,3.
168 spwmap=[[0,0,1,1],[0,1,0,1]] (use a list of lists for multiple
169 gaintables)
170 paramactive Control which parameters are solved for; a vector of (exactly) three booleans for delay, delay-rate and dispersive delay (in that order)
171 concatspws For combine='spw', the multi-band FFT solution can be
172 done in two different ways. For concatspws=True (the default), spws are
173 combined onto a wider frequency grid. For concatspws=False, each
174 spw is separated FFT'd, and the results are combined using the
175 shift theorem; this mode is experimental.
176 parang Apply parallactic angle correction on the fly.
178 --------- examples -----------------------------------------------------------
181 For more information, see the task pages of gaincal in CASA Docs:
183 https://casa.nrao.edu/casadocs/
184 minsnr -- Reject solutions below this SNR
185 default: 3.0
188 """
190 _info_group_ = """calibration"""
191 _info_desc_ = """Fringe fit delay and rates"""
193 def __call__( self, vis='', caltable='', field='', spw='', intent='', selectdata=True, timerange='', uvrange='', antenna='', scan='', observation='', msselect='', solint='inf', combine='', refant='', minsnr=float(3.0), zerorates=False, globalsolve=True, niter=int(100), delaywindow=[ ], ratewindow=[ ], append=False, corrdepflags=False, corrcomb='none', docallib=False, callib='', gaintable=[ ], gainfield=[ ], interp=[ ], spwmap=[ ], paramactive=[ ], concatspws=True, parang=False ):
194 schema = {'vis': {'type': 'cReqPath', 'coerce': _coerce.expand_path}, 'caltable': {'type': 'cStr', 'coerce': _coerce.to_str}, 'field': {'type': 'cStr', 'coerce': _coerce.to_str}, 'spw': {'type': 'cStr', 'coerce': _coerce.to_str}, 'intent': {'type': 'cStr', 'coerce': _coerce.to_str}, 'selectdata': {'type': 'cBool'}, 'timerange': {'type': 'cStr', 'coerce': _coerce.to_str}, 'uvrange': {'type': 'cVariant', 'coerce': [_coerce.to_variant]}, 'antenna': {'type': 'cStr', 'coerce': _coerce.to_str}, 'scan': {'type': 'cStr', 'coerce': _coerce.to_str}, 'observation': {'anyof': [{'type': 'cStr', 'coerce': _coerce.to_str}, {'type': 'cInt'}]}, 'msselect': {'type': 'cStr', 'coerce': _coerce.to_str}, 'solint': {'type': 'cVariant', 'coerce': [_coerce.to_variant]}, 'combine': {'type': 'cStr', 'coerce': _coerce.to_str}, 'refant': {'type': 'cStr', 'coerce': _coerce.to_str}, 'minsnr': {'type': 'cFloat', 'coerce': _coerce.to_float}, 'zerorates': {'type': 'cBool'}, 'globalsolve': {'type': 'cBool'}, 'niter': {'type': 'cInt'}, 'delaywindow': {'type': 'cFloatVec', 'coerce': [_coerce.to_list,_coerce.to_floatvec]}, 'ratewindow': {'type': 'cFloatVec', 'coerce': [_coerce.to_list,_coerce.to_floatvec]}, 'append': {'type': 'cBool'}, 'corrdepflags': {'type': 'cBool'}, 'corrcomb': {'type': 'cStr', 'coerce': _coerce.to_str}, 'docallib': {'type': 'cBool'}, 'callib': {'type': 'cStr', 'coerce': _coerce.to_str}, 'gaintable': {'type': 'cStrVec', 'coerce': [_coerce.to_list,_coerce.to_strvec]}, 'gainfield': {'type': 'cStrVec', 'coerce': [_coerce.to_list,_coerce.to_strvec]}, 'interp': {'type': 'cStrVec', 'coerce': [_coerce.to_list,_coerce.to_strvec]}, 'spwmap': {'type': 'cVariant', 'coerce': [_coerce.to_variant]}, 'paramactive': {'type': 'cBoolVec', 'coerce': [_coerce.to_list,_coerce.to_boolvec]}, 'concatspws': {'type': 'cBool'}, 'parang': {'type': 'cBool'}}
195 doc = {'vis': vis, 'caltable': caltable, 'field': field, 'spw': spw, 'intent': intent, 'selectdata': selectdata, 'timerange': timerange, 'uvrange': uvrange, 'antenna': antenna, 'scan': scan, 'observation': observation, 'msselect': msselect, 'solint': solint, 'combine': combine, 'refant': refant, 'minsnr': minsnr, 'zerorates': zerorates, 'globalsolve': globalsolve, 'niter': niter, 'delaywindow': delaywindow, 'ratewindow': ratewindow, 'append': append, 'corrdepflags': corrdepflags, 'corrcomb': corrcomb, 'docallib': docallib, 'callib': callib, 'gaintable': gaintable, 'gainfield': gainfield, 'interp': interp, 'spwmap': spwmap, 'paramactive': paramactive, 'concatspws': concatspws, 'parang': parang}
196 assert _pc.validate(doc,schema), create_error_string(_pc.errors)
197 _logging_state_ = _start_log( 'fringefit', [ 'vis=' + repr(_pc.document['vis']), 'caltable=' + repr(_pc.document['caltable']), 'field=' + repr(_pc.document['field']), 'spw=' + repr(_pc.document['spw']), 'intent=' + repr(_pc.document['intent']), 'selectdata=' + repr(_pc.document['selectdata']), 'timerange=' + repr(_pc.document['timerange']), 'uvrange=' + repr(_pc.document['uvrange']), 'antenna=' + repr(_pc.document['antenna']), 'scan=' + repr(_pc.document['scan']), 'observation=' + repr(_pc.document['observation']), 'msselect=' + repr(_pc.document['msselect']), 'solint=' + repr(_pc.document['solint']), 'combine=' + repr(_pc.document['combine']), 'refant=' + repr(_pc.document['refant']), 'minsnr=' + repr(_pc.document['minsnr']), 'zerorates=' + repr(_pc.document['zerorates']), 'globalsolve=' + repr(_pc.document['globalsolve']), 'niter=' + repr(_pc.document['niter']), 'delaywindow=' + repr(_pc.document['delaywindow']), 'ratewindow=' + repr(_pc.document['ratewindow']), 'append=' + repr(_pc.document['append']), 'corrdepflags=' + repr(_pc.document['corrdepflags']), 'corrcomb=' + repr(_pc.document['corrcomb']), 'docallib=' + repr(_pc.document['docallib']), 'callib=' + repr(_pc.document['callib']), 'gaintable=' + repr(_pc.document['gaintable']), 'gainfield=' + repr(_pc.document['gainfield']), 'interp=' + repr(_pc.document['interp']), 'spwmap=' + repr(_pc.document['spwmap']), 'paramactive=' + repr(_pc.document['paramactive']), 'concatspws=' + repr(_pc.document['concatspws']), 'parang=' + repr(_pc.document['parang']) ] )
198 task_result = None
199 try:
200 task_result = _fringefit_t( _pc.document['vis'], _pc.document['caltable'], _pc.document['field'], _pc.document['spw'], _pc.document['intent'], _pc.document['selectdata'], _pc.document['timerange'], _pc.document['uvrange'], _pc.document['antenna'], _pc.document['scan'], _pc.document['observation'], _pc.document['msselect'], _pc.document['solint'], _pc.document['combine'], _pc.document['refant'], _pc.document['minsnr'], _pc.document['zerorates'], _pc.document['globalsolve'], _pc.document['niter'], _pc.document['delaywindow'], _pc.document['ratewindow'], _pc.document['append'], _pc.document['corrdepflags'], _pc.document['corrcomb'], _pc.document['docallib'], _pc.document['callib'], _pc.document['gaintable'], _pc.document['gainfield'], _pc.document['interp'], _pc.document['spwmap'], _pc.document['paramactive'], _pc.document['concatspws'], _pc.document['parang'] )
201 except Exception as exc:
202 _except_log('fringefit', exc)
203 raise
204 finally:
205 task_result = _end_log( _logging_state_, 'fringefit', task_result )
206 return task_result
208fringefit = _fringefit( )