fatal: could not read Username for 'https://open-bitbucket.nrao.edu': No such device or address
Error response from daemon: No such container: wheel-container-test
Error response from daemon: No such container: wheel-container-test
2023-05-02 21:16:29        INFO        Display::setAgentParameters          datadisplay is 1
2023-05-02 21:16:29        INFO        Display::setAgentParameters          reportdisplay is 0
2023-05-02 21:16:29        INFO        Display::setAgentParameters          format is screen
2023-05-02 21:16:29        INFO        AgentFlagger::initAgents        There are 3 valid agents in the list. Agents: manual, summary, display
2023-05-02 21:16:29        INFO        FlagDataHandler::preLoadColumn         Setting row blocking to number of rows in selected table: 4
2023-05-02 21:16:29        INFO        FlagMSHandler::        Chunk = 1 [progress: 25%], Observation = 0, Array = 0, Scan = 1, Field = 0 (r aqr), Spw = 1, Channels = 512, Corrs = [ XX YY ], Total Rows = 1
2023-05-02 21:16:29        INFO        Display::getChunkInfo         FlagAgentDisplay::getChunkInfo Field : 0 , r aqr Spw : 1 Scan : 1 : 1
2023-05-02 21:16:29        INFO        Display::processAntennaPair          Going to process requested baseline (0,0)
/home/casatest/venv/bin/python3.8: No module named casaplotserver
2023-05-02 21:16:29        INFO        Manual::chunkSummary        => Data flagged so far 100% (1024/1024)
2023-05-02 21:16:29        INFO        FlagMSHandler::        Chunk = 2 [progress: 50%], Observation = 0, Array = 0, Scan = 1, Field = 0 (r aqr), Spw = 2, Channels = 1, Corrs = [ XX YY ], Total Rows = 1
2023-05-02 21:16:29        INFO        Display::getChunkInfo         FlagAgentDisplay::getChunkInfo Field : 0 , r aqr Spw : 2 Scan : 1 : 1
2023-05-02 21:16:29        INFO        Display::processAntennaPair          Going to process requested baseline (0,0)
2023-05-02 21:16:29        INFO        Manual::chunkSummary        => Data flagged so far 100% (2/2)
2023-05-02 21:16:29        INFO        FlagMSHandler::        Chunk = 3 [progress: 75%], Observation = 0, Array = 0, Scan = 1, Field = 0 (r aqr), Spw = 3, Channels = 512, Corrs = [ XX YY ], Total Rows = 1
2023-05-02 21:16:29        INFO        Display::getChunkInfo         FlagAgentDisplay::getChunkInfo Field : 0 , r aqr Spw : 3 Scan : 1 : 1
2023-05-02 21:16:29        INFO        Display::processAntennaPair          Going to process requested baseline (0,0)
2023-05-02 21:16:29        INFO        Manual::chunkSummary        => Data flagged so far 100% (1024/1024)
2023-05-02 21:16:29        INFO        FlagMSHandler::        Chunk = 4 [progress: 100%], Observation = 0, Array = 0, Scan = 1, Field = 0 (r aqr), Spw = 4, Channels = 1, Corrs = [ XX YY ], Total Rows = 1
2023-05-02 21:16:29        INFO        Display::getChunkInfo         FlagAgentDisplay::getChunkInfo Field : 0 , r aqr Spw : 4 Scan : 1 : 1
2023-05-02 21:16:29        INFO        Display::processAntennaPair          Going to process requested baseline (0,0)
2023-05-02 21:16:29        INFO        Manual::chunkSummary        => Data flagged so far 100% (2/2)
2023-05-02 21:16:29        INFO        FlagMSHandler::nextChunk         ====================================================================================
2023-05-02 21:16:29        INFO        Manual::tableSummary        => Percentage of data flagged in table selection: 100%
2023-05-02 21:16:29        INFO        AgentFlagger::run        => Writing flags to the MS
2023-05-02 21:16:29        INFO        Summary::getResult          observation 0 flagged: 2052 total: 2052 (100%)
2023-05-02 21:16:29        INFO        Summary::getResult          scan 1 flagged: 2052 total: 2052 (100%)
2023-05-02 21:16:29        INFO        Summary::getResult          antenna PM04 flagged: 2052 total: 2052 (100%)
2023-05-02 21:16:29        INFO        Summary::getResult          field r aqr flagged: 2052 total: 2052 (100%)
2023-05-02 21:16:29        INFO        Summary::getResult          spw 4 flagged: 2 total: 2 (100%)
2023-05-02 21:16:29        INFO        Summary::getResult          spw 3 flagged: 1024 total: 1024 (100%)
2023-05-02 21:16:29        INFO        Summary::getResult          spw 1 flagged: 1024 total: 1024 (100%)
2023-05-02 21:16:29        INFO        Summary::getResult          spw 2 flagged: 2 total: 2 (100%)
2023-05-02 21:16:29        INFO        Summary::getResult          correlation YY flagged: 1026 total: 1026 (100%)
2023-05-02 21:16:29        INFO        Summary::getResult          correlation XX flagged: 1026 total: 1026 (100%)
2023-05-02 21:16:29        INFO        Summary::getResult          array 0 flagged: 2052 total: 2052 (100%)
2023-05-02 21:16:29        INFO        Summary::getResult          Total Flagged: 2052 Total Counts: 2052 (100%)
2023-05-02 21:16:29        INFO        Display::displayReports         Report Displays are turned OFF
2023-05-02 21:16:30        INFO        SubImageFactory::createImage        Creating image 'blahxx.im' of shape [1536, 1536, 1, 2]
2023-05-02 21:16:31        INFO        name::        No table opened.
2023-05-02 21:16:31        INFO        showcache::        The Table Cache is empty.
2023-05-02 21:16:31        INFO        name::        No table opened.
2023-05-02 21:16:31        INFO        showcache::        The Table Cache is empty.
2023-05-02 21:16:31        SEVERE        image::open (file /tmp/build-via-sdist-h7fp77a8/casatools-6.5.6.8a100.dev0+dirty/src/tools/image/image_cmpt.cc, line 4208)        Exception Reported: Exception: File name is empty.
2023-05-02 21:16:31        SEVERE        image::open (file /tmp/build-via-sdist-h7fp77a8/casatools-6.5.6.8a100.dev0+dirty/src/tools/image/image_cmpt.cc, line 4208)+        ... thrown by static void casa::ImageFactory::_checkInfile(const casacore::String&) at File: /source/casa6/casatools/src/code/imageanalysis/ImageAnalysis/ImageFactory2.cc, line: 373
2023-05-02 21:16:31        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2023-05-02 21:16:31        SEVERE        image::transpose (file /tmp/build-via-sdist-h7fp77a8/casatools-6.5.6.8a100.dev0+dirty/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-05-02 21:16:31        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 2 were given for reordering. Number of axes to reorder must match the number of image axes
2023-05-02 21:16:31        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2023-05-02 21:16:31        SEVERE        image::transpose (file /tmp/build-via-sdist-h7fp77a8/casatools-6.5.6.8a100.dev0+dirty/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-05-02 21:16:31        SEVERE        ImageTransposer::_getOrder        Axis number 0 specified multiple times in order parameter 10 . It can only be specified once.
2023-05-02 21:16:31        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2023-05-02 21:16:31        SEVERE        image::transpose (file /tmp/build-via-sdist-h7fp77a8/casatools-6.5.6.8a100.dev0+dirty/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-05-02 21:16:31        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 2 were given. Number of given axes must match the number of image axes
2023-05-02 21:16:31        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2023-05-02 21:16:31        SEVERE        image::transpose (file /tmp/build-via-sdist-h7fp77a8/casatools-6.5.6.8a100.dev0+dirty/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-05-02 21:16:31        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2023-05-02 21:16:31        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2023-05-02 21:16:31        SEVERE        image::transpose (file /tmp/build-via-sdist-h7fp77a8/casatools-6.5.6.8a100.dev0+dirty/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-05-02 21:16:31        SEVERE        ImageTransposer::_getOrder        Image has 3 axes but 5 were given for reordering. Number of axes to reorder must match the number of image axes
2023-05-02 21:16:31        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2023-05-02 21:16:31        SEVERE        image::transpose (file /tmp/build-via-sdist-h7fp77a8/casatools-6.5.6.8a100.dev0+dirty/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-05-02 21:16:31        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Image has 3 axes but 4 were given. Number of given axes must match the number of image axes
2023-05-02 21:16:31        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2023-05-02 21:16:31        SEVERE        image::transpose (file /tmp/build-via-sdist-h7fp77a8/casatools-6.5.6.8a100.dev0+dirty/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-05-02 21:16:31        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 123 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2023-05-02 21:16:31        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2023-05-02 21:16:31        SEVERE        image::transpose (file /tmp/build-via-sdist-h7fp77a8/casatools-6.5.6.8a100.dev0+dirty/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-05-02 21:16:31        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        No axis matches requested axis s. Image axis names are [right ascension, declination, frequency]
2023-05-02 21:16:31        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Ambiguous axis specification. Both r and r match image axis name right ascension
2023-05-02 21:16:31        SEVERE        image::transpose (file /tmp/build-via-sdist-h7fp77a8/casatools-6.5.6.8a100.dev0+dirty/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-05-02 21:16:31        SEVERE        CoordinateSystem::getWorldAxesOrder (file /source/casa6/casatools/casacore/coordinates/Coordinates/CoordinateSystem.cc, line 4665)        Ambiguous axis specification. Both r and r match image axis name right ascension
2023-05-02 21:16:31        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2023-05-02 21:16:31        SEVERE        image::transpose (file /tmp/build-via-sdist-h7fp77a8/casatools-6.5.6.8a100.dev0+dirty/src/tools/image/image_cmpt.cc, line 6455)        Exception Reported: 2023-05-02 21:16:31        SEVERE        ImageTransposer::_getOrder        Image does not contain zero-based axis number 3 but this was incorrectly specified in order parameter. 103 All digits in the order parameter must be greater than or equal to zero and less than the number of image axes.
2023-05-02 21:16:31        INFO        name::        No table opened.
2023-05-02 21:16:31        INFO        showcache::        The Table Cache is empty.
2023-05-02 21:16:31        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2023-05-02 21:16:31        INFO        ::::ImageFactory::createImage        Created Temp image  of shape [10, 10, 4, 10] with float valued pixels.
2023-05-02 21:16:31        INFO        ::::image::fromshape        Ran ia.fromshape
2023-05-02 21:16:31        INFO        ::::image::fromshape        ia.fromshape(outfile="", shape=[10,10,4,10], csys={...}, linear=false, overwrite=false, log=true, type="f")
2023-05-02 21:16:31        INFO        ::::image::transpose        Ran ia.transpose
2023-05-02 21:16:31        INFO        ::::image::transpose        ia.transpose(outfile="", order="3210")
2023-05-02 21:16:31        INFO        name::        No table opened.
2023-05-02 21:16:31        INFO        showcache::        The Table Cache is empty.
2023-05-02 21:16:31        INFO        ImageFactory::createImage        Created Temp image  of shape [10, 20, 30] with float valued pixels.
2023-05-02 21:16:31        INFO        BeamManipulator::set        Setting (global) restoring beam.
2023-05-02 21:16:31        INFO        BeamManipulator::set        Beam parameters:  Major          : 4 arcmin
2023-05-02 21:16:31        INFO        BeamManipulator::set+          Minor          : 3 arcmin
2023-05-02 21:16:31        INFO        BeamManipulator::set+          Position Angle : 0 deg
2023-05-02 21:16:31        INFO        name::        No table opened.
2023-05-02 21:16:31        INFO        showcache::        The Table Cache is empty.
2023-05-02 21:16:31        INFO        SubImageFactory::createImage        Creating image 'straight_copy_0' of shape [5, 6, 7]
2023-05-02 21:16:31        INFO        SubImageFactory::createImage        Creating image 'straight_copy_1' of shape [5, 6, 7]
2023-05-02 21:16:32        INFO        SubImageFactory::createImage        Creating image 'straight_copy_2' of shape [5, 6, 7]
2023-05-02 21:16:32        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2023-05-02 21:16:32        INFO        SubImageFactory::createImage        Creating image 'straight_copy_3' of shape [5, 6, 7]
2023-05-02 21:16:32        INFO        ImageTransposer::transpose        Old to new axis mapping is [0, 1, 2]
2023-05-02 21:16:32        INFO        name::        No table opened.
2023-05-02 21:16:32        INFO        showcache::        The Table Cache is empty.
2023-05-02 21:16:32        INFO        SubImageFactory::createImage        Creating image 'transpose_0' of shape [6, 7, 5]
2023-05-02 21:16:33        INFO        SubImageFactory::createImage        Creating image 'transpose_1' of shape [6, 7, 5]
2023-05-02 21:16:33        INFO        SubImageFactory::createImage        Creating image 'transpose_2' of shape [6, 7, 5]
2023-05-02 21:16:33        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2023-05-02 21:16:33        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2023-05-02 21:16:33        INFO        SubImageFactory::createImage        Creating image 'transpose_3' of shape [6, 7, 5]
2023-05-02 21:16:33        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2023-05-02 21:16:34        INFO        ImageTransposer::transpose        Old to new axis mapping is [1, 2, 0]
2023-05-02 21:16:34        INFO        name::        No table opened.
2023-05-02 21:16:34        INFO        showcache::        The Table Cache is empty.
tar: work: Cannot stat: No such file or directory
tar: Exiting with failure status due to previous errors