Build: #2 failed
Job: Test Tasks RHEL7 failed
Full log: Test case result
The below summarizes the result of the test "Full log" in build 2 of CASA - Casa 6 Dev Test Full - CAS-14008 - Test Tasks RHEL7.
- Description
- Full log
- Test class
- test_task_mstransform
- Method
- full log
- Duration
- 24 mins
- Status
- Failed (New Failure)
Error Log
.2023-01-11 18:30:44 SEVERE mstransform::::casa Task mstransform raised an exception of class RuntimeError with the following message: MSSelectionNullSelection : The selected table has zero rows.
..2023-01-11 18:30:50 WARN MSTransformManager::checkDataColumnsAvailable Requested to make virtual MODEL_DATA column real but SOURCE_MODEL column is not present in SOURCE sub-table
..........2023-01-11 18:32:11 WARN SubMS::combineSpws() Incomplete coverage of combined SPW starting at timestamp 16-Feb-2003/22:13:50.0, baseline ( 1, 23 )
2023-01-11 18:32:11 WARN SubMS::combineSpws()+ In this and further affected rows, the data arrays will be padded with zeros and corresponding channels flagged.
2023-01-11 18:32:11 WARN SubMS::combineSpws() Averaging failed for the following channel/correllation pairs from output row 660 up to 660. Corresponding visibilities will be flagged:
2023-01-11 18:32:11 WARN SubMS::combineSpws()+ (45, 0)
2023-01-11 18:32:11 WARN SubMS::combineSpws() Averaging failed for the following channel/correllation pairs from output row 710 up to 710. Corresponding visibilities will be flagged:
2023-01-11 18:32:11 WARN SubMS::combineSpws()+ (45, 0)
2023-01-11 18:32:11 WARN SubMS::combineSpws() Averaging failed for the following channel/correllation pairs from output row 830 up to 830. Corresponding visibilities will be flagged:
2023-01-11 18:32:11 WARN SubMS::combineSpws()+ (45, 0)
2023-01-11 18:32:11 WARN SubMS::combineSpws() Averaging failed for the following channel/correllation pairs from output row 860 up to 860. Corresponding visibilities will be flagged:
2023-01-11 18:32:11 WARN SubMS::combineSpws()+ (45, 0)
2023-01-11 18:32:11 WARN SubMS::combineSpws() Averaging failed for the following channel/correllation pairs from output row 910 up to 910. Corresponding visibilities will be flagged:
2023-01-11 18:32:11 WARN SubMS::combineSpws()+ (45, 0)
2023-01-11 18:32:11 WARN SubMS::combineSpws() Averaging failed for the following channel/correllation pairs from output row 1035 up to 1035. Corresponding visibilities will be flagged:
2023-01-11 18:32:11 WARN SubMS::combineSpws()+ (45, 0)
2023-01-11 18:32:11 WARN SubMS::combineSpws() Averaging failed for the following channel/correllation pairs from output row 1085 up to 1085. Corresponding visibilities will be flagged:
2023-01-11 18:32:11 WARN SubMS::combineSpws()+ (45, 0)
2023-01-11 18:32:11 WARN SubMS::combineSpws() Averaging failed for the following channel/correllation pairs from output row 1385 up to 1385. Corresponding visibilities will be flagged:
2023-01-11 18:32:11 WARN SubMS::combineSpws()+ (45, 1)
2023-01-11 18:32:12 WARN SubMS::combineSpws() Averaging failed for the following channel/correllation pairs from output row 1460 up to 1460. Corresponding visibilities will be flagged:
2023-01-11 18:32:12 WARN SubMS::combineSpws()+ (45, 1)
2023-01-11 18:32:12 WARN SubMS::combineSpws() Incomplete coverage of combined SPW in 4 of 1891 output rows.
.2023-01-11 18:32:15 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:32:15 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:32:15 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:32:15 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:32:15 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:32:15 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class ValueError with the following message: Number of chanbin is different from the number of spw
......2023-01-11 18:33:15 WARN MSTransformManager::setup There is only one selected SPW, no need to combine
..2023-01-11 18:33:30 WARN MSTransformManager::setup There is only one selected SPW, no need to combine
.2023-01-11 18:33:34 WARN MSTransformManager::setup There is only one selected SPW, no need to combine
...2023-01-11 18:33:47 WARN MSTransformManager::setup There is only one selected SPW, no need to combine
..s2023-01-11 18:33:58 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:34:00 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:34:04 WARN MSTransformManager::combineCubeOfData Detected combination of SPWs with different EXPOSURE
2023-01-11 18:34:04 WARN MSTransformManager::combineCubeOfData+ Will use WEIGHT_SPECTRUM to combine them
..s....s2023-01-11 18:34:33 WARN MSTransformManager::setup There is only one selected SPW, no need to combine
.2023-01-11 18:34:34 WARN MSTransformManager::checkDataColumnsToFill CORRECTED_DATA column requested but not available in input MS
2023-01-11 18:34:34 SEVERE mstransform::::casa Task mstransform raised an exception of class RuntimeError with the following message: Currently the option 'combinespws' is only supported when the number of channels is the same for all the spw's selected. One of the SPWs selected has 3840 channels, but another selected SPW has 128 channels.
.2023-01-11 18:34:34 WARN MSTransformManager::checkDataColumnsToFill CORRECTED_DATA column requested but not available in input MS
2023-01-11 18:34:34 SEVERE mstransform::::casa Task mstransform raised an exception of class RuntimeError with the following message: Currently the option 'combinespws' is only supported when the number of channels is the same for all the spw's selected. One of the SPWs selected has 3840 channels, but another selected SPW has 128 channels.
.2023-01-11 18:34:34 WARN MSTransformManager::checkDataColumnsToFill CORRECTED_DATA column requested but not available in input MS
2023-01-11 18:34:34 SEVERE mstransform::::casa Task mstransform raised an exception of class RuntimeError with the following message: Currently the option 'combinespws' is only supported when the number of channels is the same for all the spw's selected. One of the SPWs selected has 128 channels, but another selected SPW has 3840 channels.
.2023-01-11 18:34:35 WARN MSTransformManager::checkDataColumnsToFill CORRECTED_DATA column requested but not available in input MS
2023-01-11 18:34:35 SEVERE mstransform::::casa Task mstransform raised an exception of class RuntimeError with the following message: Currently the option 'combinespws' is only supported when the number of channels is the same for all the spw's selected. One of the SPWs selected has 3840 channels, but another selected SPW has 128 channels.
.............2023-01-11 18:38:50 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E.2023-01-11 18:39:12 WARN importasdm::::casa Ephemeris is in ICRS instead of J2000 frame.
2023-01-11 18:39:12 WARN importasdm::::casa+ Entry in SOURCE table will be converted to J2000
2023-01-11 18:39:12 WARN importasdm::::casa Ephemeris is in ICRS instead of J2000 frame.
2023-01-11 18:39:12 WARN importasdm::::casa+ Entry in SOURCE table will be converted to J2000
./usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py:285: ResourceWarning: unclosed file <_io.TextIOWrapper name='mstransform_reference/ngc5921_callib.txt' mode='r' encoding='UTF-8'>
mycallib.read(callib)
ResourceWarning: Enable tracemalloc to get the object allocation traceback
...2023-01-11 18:40:47 WARN MSTransformRegridder::calcChanFreqs *** Requested new channel width (1182.5 Hz) is smaller than smallest original channel width
2023-01-11 18:40:47 WARN MSTransformRegridder::calcChanFreqs+ which is 61039.5 Hz
2023-01-11 18:40:47 WARN MSTransformRegridder::calcChanFreqs+ or 51.6189 m/s
2023-01-11 18:40:47 SEVERE MSTransformRegridder::calcChanFreqs calcChanFreqs failed, check input start and width parameters
2023-01-11 18:40:47 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class RuntimeError with the following message: 2023-01-11 18:40:47 SEVERE MSTransformRegridder::calcChanFreqs calcChanFreqs failed, check input start and width parameters
.s2023-01-11 18:40:53 WARN MSTransformManager::setup There is only one selected SPW, no need to combine
.s2023-01-11 18:40:59 WARN MSTransformManager::setup There is only one selected SPW, no need to combine
...........s...2023-01-11 18:42:38 WARN MSTransformRegridder::convertGridPars Invalid velocity type RADIO, setting type to "radio"
....2023-01-11 18:43:13 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:13 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:13 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:14 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:20 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:27 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:35 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:40 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:40 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:40 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:40 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:40 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:42 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:43 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:44 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:45 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:46 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:47 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:48 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:43:50 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E....2023-01-11 18:45:13 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:45:13 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:45:13 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:45:13 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E....2023-01-11 18:46:00 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:46:00 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:46:01 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:46:01 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E....ssssssssssssssss2023-01-11 18:46:46 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E.2023-01-11 18:47:26 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:47:27 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:47:27 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:47:27 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:47:27 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:47:27 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:47:27 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E...2023-01-11 18:48:04 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:48:04 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E..2023-01-11 18:49:18 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:49:18 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:49:19 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:49:19 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:49:19 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:49:19 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:49:19 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E2023-01-11 18:49:19 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E....2023-01-11 18:50:52 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E.sss2023-01-11 18:51:15 WARN importasdm::::casa Ephemeris is in ICRS instead of J2000 frame.
2023-01-11 18:51:15 WARN importasdm::::casa+ Entry in SOURCE table will be converted to J2000
2023-01-11 18:51:15 WARN importasdm::::casa Ephemeris is in ICRS instead of J2000 frame.
2023-01-11 18:51:15 WARN importasdm::::casa+ Entry in SOURCE table will be converted to J2000
.2023-01-11 18:51:20 SEVERE ParallelDataHelper::::casa Task mstransform raised an exception of class AttributeError with the following message: module 'numpy' has no attribute 'int'
E.........2023-01-11 18:52:42 WARN MSTransformManager::setup There is only one selected SPW, no need to combine
..2023-01-11 18:52:59 WARN MSTransformManager::setup There is only one selected SPW, no need to combine
......2023-01-11 18:54:25 WARN MSTransformManager::parseTimeAvgParams Operating with ALMA data, automatically adding state to timespan
2023-01-11 18:54:25 WARN MSTransformManager::parseTimeAvgParams+ In order to remove sub-scan boundaries which limit time average to 30s
....
======================================================================
ERROR: test_freqavg1 (__main__.test_FreqAvg)
mstranform: Average 20 channels of one spw
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 1167, in test_freqavg1
mstransform(vis=self.vis, outputvis=self.outputms, spw='2', chanaverage=True, chanbin=20)
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_freqavg11 (__main__.test_FreqAvg)
mstransform: Automatically convert numpy type to Python type
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 1234, in test_freqavg11
mstransform(vis=self.vis, outputvis=self.outputms, spw='10', chanaverage=True,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_freqavg2 (__main__.test_FreqAvg)
mstranform: Select a few channels to average from one spw
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 1181, in test_freqavg2
mstransform(vis=self.vis, outputvis=self.outputms, spw='2:10~20', chanaverage=True, chanbin=2)
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_freqavg3 (__main__.test_FreqAvg)
mstranform: Average all channels of one spw
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 1190, in test_freqavg3
mstransform(vis=self.vis, outputvis=self.outputms, spw='23', chanaverage=True, chanbin=128)
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_freqavg4 (__main__.test_FreqAvg)
mstranform: Average using different bins for several spws
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 1199, in test_freqavg4
mstransform(vis=self.vis, outputvis=self.outputms, spw='10,12,20', chanaverage=True,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_combineSPWAndChanAvgWithWeightSpectrum (__main__.test_WeightSpectrum)
mstransform: Combine SPWs and channel average using WEIGHT_SPECTRUM
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 1682, in test_combineSPWAndChanAvgWithWeightSpectrum
mstransform(vis=self.vis,outputvis=self.outvis,datacolumn="DATA",combinespws=True,regridms=True,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_combineSPWDiffExpAndChanAvgWithWeightSpectrum (__main__.test_WeightSpectrum)
mstransform: Combine SPWs with different exposure and channel average using WEIGHT_SPECTRUM
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 1702, in test_combineSPWDiffExpAndChanAvgWithWeightSpectrum
mstransform(vis=self.vis,outputvis=self.outvis,datacolumn="DATA",combinespws=True,regridms=True,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_timeaverage_and_channel_average (__main__.test_multiple_transformations)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 2114, in test_timeaverage_and_channel_average
mstransform(vis=self.vis,outputvis=self.outvis,datacolumn='DATA',timeaverage=True,timebin='2s',chanaverage=True,chanbin=2)
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_timeavg_2_steps_vs_1_step_all (__main__.test_spectrum_transformations_2_steps_vs_1_step)
mstransform: Check that the result of chan/time average ALL applied in 1 step is the same as applied in 2 steps
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4301, in test_chanavg_timeavg_2_steps_vs_1_step_all
mstransform(vis=self.vis,outputvis=self.auxvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_timeavg_2_steps_vs_1_step_corrected (__main__.test_spectrum_transformations_2_steps_vs_1_step)
mstransform: Check that the result of chan/time average CORRECTED applied in 1 step is the same as applied in 2 steps
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4118, in test_chanavg_timeavg_2_steps_vs_1_step_corrected
mstransform(vis=self.vis,outputvis=self.auxvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_timeavg_2_steps_vs_1_step_data (__main__.test_spectrum_transformations_2_steps_vs_1_step)
mstransform: Check that the result of chan/time average DATA applied in 1 step is the same as applied in 2 steps
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4191, in test_chanavg_timeavg_2_steps_vs_1_step_data
mstransform(vis=self.vis,outputvis=self.auxvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_timeavg_2_steps_vs_1_step_model (__main__.test_spectrum_transformations_2_steps_vs_1_step)
mstransform: Check that the result of chan/time average MODEL applied in 1 step is the same as applied in 2 steps
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4264, in test_chanavg_timeavg_2_steps_vs_1_step_model
mstransform(vis=self.vis,outputvis=self.auxvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_timeavg_chanavg_2_steps_vs_1_step_all (__main__.test_spectrum_transformations_2_steps_vs_1_step)
mstransform: Check that the result of time/chan average ALL applied in 1 step is the same as applied in 2 steps
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4343, in test_timeavg_chanavg_2_steps_vs_1_step_all
mstransform(vis=self.auxvis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_timeavg_chanavg_2_steps_vs_1_step_corrected (__main__.test_spectrum_transformations_2_steps_vs_1_step)
mstransform: Check that the result of time/chan average CORRECTED applied in 1 step is the same as applied in 2 steps
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4087, in test_timeavg_chanavg_2_steps_vs_1_step_corrected
mstransform(vis=self.auxvis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_timeavg_chanavg_2_steps_vs_1_step_data (__main__.test_spectrum_transformations_2_steps_vs_1_step)
mstransform: Check that the result of time/chan average DATA applied in 1 step is the same as applied in 2 steps
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4161, in test_timeavg_chanavg_2_steps_vs_1_step_data
mstransform(vis=self.auxvis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_timeavg_chanavg_2_steps_vs_1_step_model (__main__.test_spectrum_transformations_2_steps_vs_1_step)
mstransform: Check that the result of time/chan average MODEL applied in 1 step is the same as applied in 2 steps
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4233, in test_timeavg_chanavg_2_steps_vs_1_step_model
mstransform(vis=self.auxvis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_useWeightSpectrum_false_vs_true_all (__main__.test_spectrum_transformations_chanavg_useWeightSpectrum_false_vs_true)
mstransform: When there are no input SPECTRUM cols chan avg result is the same regardless of useWeightSpectrum because VI/VB fills a cte. weightSpectrum/sigmaSpectrum across channels
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4472, in test_chanavg_useWeightSpectrum_false_vs_true_all
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_useWeightSpectrum_false_vs_true_corrected (__main__.test_spectrum_transformations_chanavg_useWeightSpectrum_false_vs_true)
mstransform: When there are no input SPECTRUM cols chan avg result is the same regardless of useWeightSpectrum because VI/VB fills a cte. weightSpectrum/sigmaSpectrum across channels
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4397, in test_chanavg_useWeightSpectrum_false_vs_true_corrected
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_useWeightSpectrum_false_vs_true_data (__main__.test_spectrum_transformations_chanavg_useWeightSpectrum_false_vs_true)
mstransform: When there are no input SPECTRUM cols chan avg result is the same regardless of useWeightSpectrum because VI/VB fills a cte. weightSpectrum/sigmaSpectrum across channels
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4422, in test_chanavg_useWeightSpectrum_false_vs_true_data
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_useWeightSpectrum_false_vs_true_model (__main__.test_spectrum_transformations_chanavg_useWeightSpectrum_false_vs_true)
mstransform: When there are no input SPECTRUM cols chan avg result is the same regardless of useWeightSpectrum because VI/VB fills a cte. weightSpectrum/sigmaSpectrum across channels
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4447, in test_chanavg_useWeightSpectrum_false_vs_true_model
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_spectrum_transformations_flagged_average_all (__main__.test_spectrum_transformations_flagged_average)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 5456, in test_chanavg_spectrum_transformations_flagged_average_all
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_spectrum_transformations_flagged_average_corrected (__main__.test_spectrum_transformations_flagged_average)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 5363, in test_chanavg_spectrum_transformations_flagged_average_corrected
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_spectrum_transformations_flagged_average_data (__main__.test_spectrum_transformations_flagged_average)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 5394, in test_chanavg_spectrum_transformations_flagged_average_data
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_spectrum_transformations_flagged_average_model (__main__.test_spectrum_transformations_flagged_average)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 5425, in test_chanavg_spectrum_transformations_flagged_average_model
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_timeavg_spectrum_transformations_flagged_average_all (__main__.test_spectrum_transformations_flagged_average)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 5710, in test_chanavg_timeavg_spectrum_transformations_flagged_average_all
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_timeavg_spectrum_transformations_flagged_average_corrected (__main__.test_spectrum_transformations_flagged_average)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 5611, in test_chanavg_timeavg_spectrum_transformations_flagged_average_corrected
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_timeavg_spectrum_transformations_flagged_average_data (__main__.test_spectrum_transformations_flagged_average)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 5644, in test_chanavg_timeavg_spectrum_transformations_flagged_average_data
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_timeavg_spectrum_transformations_flagged_average_model (__main__.test_spectrum_transformations_flagged_average)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 5677, in test_chanavg_timeavg_spectrum_transformations_flagged_average_model
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_mean_all (__main__.test_spectrum_transformations_mean)
mstransform: Check that after chan avg WEIGHT/SIGMA is equivalent to the mean of the unflagged WEIGHT_SPECTRUM samples
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 3156, in test_chanavg_mean_all
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_mean_corrected (__main__.test_spectrum_transformations_mean)
mstransform: Check that after chan avg WEIGHT/SIGMA is equivalent to the mean of the unflagged WEIGHT_SPECTRUM samples
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 2972, in test_chanavg_mean_corrected
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_mean_data (__main__.test_spectrum_transformations_mean)
mstransform: Check that after chan avg WEIGHT/SIGMA is equivalent to the mean of the unflagged WEIGHT_SPECTRUM samples
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 3034, in test_chanavg_mean_data
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_mean_model (__main__.test_spectrum_transformations_mean)
mstransform: Check that after chan avg WEIGHT/SIGMA is equivalent to the mean of the unflagged WEIGHT_SPECTRUM samples
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 3095, in test_chanavg_mean_model
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_timeavg_chanavg_mean_all (__main__.test_spectrum_transformations_mean)
mstransform: Check that after time/chan avg WEIGHT/SIGMA is equivalent to the mean of the unflagged WEIGHT_SPECTRUM samples
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 3196, in test_timeavg_chanavg_mean_all
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_timeavg_chanavg_mean_corrected (__main__.test_spectrum_transformations_mean)
mstransform: Check that after time/chan avg WEIGHT/SIGMA is equivalent to the mean of the unflagged WEIGHT_SPECTRUM samples
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 3013, in test_timeavg_chanavg_mean_corrected
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_timeavg_chanavg_mean_data (__main__.test_spectrum_transformations_mean)
mstransform: Check that after time/chan avg WEIGHT/SIGMA is equivalent to the mean of the unflagged WEIGHT_SPECTRUM samples
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 3074, in test_timeavg_chanavg_mean_data
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_timeavg_chanavg_mean_model (__main__.test_spectrum_transformations_mean)
mstransform: Check that after time/chan avg WEIGHT/SIGMA is equivalent to the mean of the unflagged WEIGHT_SPECTRUM samples
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 3135, in test_timeavg_chanavg_mean_model
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_all_vs_data_and_corrected (__main__.test_spectrum_transformations_multiple_col)
mstransform: Check that the result of chan avg ALL is equivalent to the results of DATA/CORRECTED stand-alone
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4520, in test_chanavg_all_vs_data_and_corrected
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_timeavg_chanavg_all_vs_data_and_corrected (__main__.test_spectrum_transformations_multiple_col)
mstransform: Check that the result of time+chan avg ALL is equivalent to the results of DATA/CORRECTED stand-alone
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4598, in test_timeavg_chanavg_all_vs_data_and_corrected
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_sigma_from_weight_corrected (__main__.test_spectrum_transformations_sigma_from_weight)
mstransform: Check that after chan avg CORRECTED SIGMA=1/sqrt(WEIGHT)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 3830, in test_chanavg_sigma_from_weight_corrected
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_sigma_from_weight_data (__main__.test_spectrum_transformations_sigma_from_weight)
mstransform: Check that after chan avg DATA SIGMA=1/sqrt(WEIGHT)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 3906, in test_chanavg_sigma_from_weight_data
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_sigma_from_weight_model (__main__.test_spectrum_transformations_sigma_from_weight)
mstransform: Check that after chan avg MODEL SIGMA=1/sqrt(WEIGHT)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 3982, in test_chanavg_sigma_from_weight_model
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_timeavg_chanavg_sigma_from_weight_corrected (__main__.test_spectrum_transformations_sigma_from_weight)
mstransform: Check that after time + chan avg CORRECTED SIGMA=1/sqrt(WEIGHT)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 3880, in test_timeavg_chanavg_sigma_from_weight_corrected
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_timeavg_chanavg_sigma_from_weight_data (__main__.test_spectrum_transformations_sigma_from_weight)
mstransform: Check that after time + chan avg DATA SIGMA=1/sqrt(WEIGHT)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 3956, in test_timeavg_chanavg_sigma_from_weight_data
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_timeavg_chanavg_sigma_from_weight_model (__main__.test_spectrum_transformations_sigma_from_weight)
mstransform: Check that after time + chan avg MODEL SIGMA=1/sqrt(WEIGHT)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4032, in test_timeavg_chanavg_sigma_from_weight_model
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_corrected_vs_data_with_sigma_unit (__main__.test_spectrum_transformations_sigma_unit)
mstransform: Check that the result of chan avg CORRECTED is the same as time avg DATA with sigma 1 multiplied by input WEIGHT
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4938, in test_chanavg_corrected_vs_data_with_sigma_unit
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_data_vs_model_with_sigma_unit (__main__.test_spectrum_transformations_sigma_unit)
mstransform: Check that the result of chan avg DATA with sigma 1 is the same as averaging MODEL
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4873, in test_chanavg_data_vs_model_with_sigma_unit
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_timeavg_useWeightSpectrum_false_vs_true_all (__main__.test_spectrum_transformations_useWeightSpectrum_false_vs_true)
Check that WEIGHT/SIGMA are generated in the same way regardless of the useWeightSpectrum parameter
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 5310, in test_chanavg_timeavg_useWeightSpectrum_false_vs_true_all
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_timeavg_useWeightSpectrum_false_vs_true_corrected (__main__.test_spectrum_transformations_useWeightSpectrum_false_vs_true)
Check that WEIGHT/SIGMA are generated in the same way regardless of the useWeightSpectrum parameter
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 5220, in test_chanavg_timeavg_useWeightSpectrum_false_vs_true_corrected
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_timeavg_useWeightSpectrum_false_vs_true_data (__main__.test_spectrum_transformations_useWeightSpectrum_false_vs_true)
Check that WEIGHT/SIGMA are generated in the same way regardless of the useWeightSpectrum parameter
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 5250, in test_chanavg_timeavg_useWeightSpectrum_false_vs_true_data
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_timeavg_useWeightSpectrum_false_vs_true_model (__main__.test_spectrum_transformations_useWeightSpectrum_false_vs_true)
Check that WEIGHT/SIGMA are generated in the same way regardless of the useWeightSpectrum parameter
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 5280, in test_chanavg_timeavg_useWeightSpectrum_false_vs_true_model
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_useWeightSpectrum_false_vs_true_all (__main__.test_spectrum_transformations_useWeightSpectrum_false_vs_true)
Check that WEIGHT/SIGMA are generated in the same way regardless of the useWeightSpectrum parameter
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 5080, in test_chanavg_useWeightSpectrum_false_vs_true_all
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_useWeightSpectrum_false_vs_true_corrected (__main__.test_spectrum_transformations_useWeightSpectrum_false_vs_true)
Check that WEIGHT/SIGMA are generated in the same way regardless of the useWeightSpectrum parameter
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4996, in test_chanavg_useWeightSpectrum_false_vs_true_corrected
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_useWeightSpectrum_false_vs_true_data (__main__.test_spectrum_transformations_useWeightSpectrum_false_vs_true)
Check that WEIGHT/SIGMA are generated in the same way regardless of the useWeightSpectrum parameter
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 5024, in test_chanavg_useWeightSpectrum_false_vs_true_data
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_useWeightSpectrum_false_vs_true_model (__main__.test_spectrum_transformations_useWeightSpectrum_false_vs_true)
Check that WEIGHT/SIGMA are generated in the same way regardless of the useWeightSpectrum parameter
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 5052, in test_chanavg_useWeightSpectrum_false_vs_true_model
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_corrected_vs_model_with_weight_constant (__main__.test_spectrum_transformations_weight_constant)
mstransform: Check that the result of chan avg CORRECTED is the same as time avg MODEL multiplied by input WEIGHT
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 4787, in test_chanavg_corrected_vs_model_with_weight_constant
mstransform(vis=self.vis,outputvis=self.outvis,
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
======================================================================
ERROR: test_chanavg_spw_with_diff_pol_shape (__main__.test_spw_poln)
mstransform: channel average spw 0 that has repeated SPW ID
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/casatest/casa6/casatasks/tests/tasks/test_task_mstransform.py", line 2329, in test_chanavg_spw_with_diff_pol_shape
mstransform(vis=self.vis, outputvis=self.outputms, datacolumn='data', spw='0',
File "/usr/local/lib/python3.8/site-packages/casatasks/mstransform.py", line 620, in __call__
task_result = _mstransform_t( _pc.document['vis'], _pc.document['outputvis'], _pc.document['createmms'], _pc.document['separationaxis'], _pc.document['numsubms'], _pc.document['tileshape'], _pc.document['field'], _pc.document['spw'], _pc.document['scan'], _pc.document['antenna'], _pc.document['correlation'], _pc.document['timerange'], _pc.document['intent'], _pc.document['array'], _pc.document['uvrange'], _pc.document['observation'], _pc.document['feed'], _pc.document['datacolumn'], _pc.document['realmodelcol'], _pc.document['keepflags'], _pc.document['usewtspectrum'], _pc.document['combinespws'], _pc.document['chanaverage'], _pc.document['chanbin'], _pc.document['hanning'], _pc.document['regridms'], _pc.document['mode'], _pc.document['nchan'], _pc.document['start'], _pc.document['width'], _pc.document['nspw'], _pc.document['interpolation'], _pc.document['phasecenter'], _pc.document['restfreq'], _pc.document['outframe'], _pc.document['veltype'], _pc.document['preaverage'], _pc.document['timeaverage'], _pc.document['timebin'], _pc.document['timespan'], _pc.document['maxuvwdistance'], _pc.document['docallib'], _pc.document['callib'], _pc.document['douvcontsub'], _pc.document['fitspw'], _pc.document['fitorder'], _pc.document['want_cont'], _pc.document['denoising_lib'], _pc.document['nthreads'], _pc.document['niter'], _pc.document['disableparallel'], _pc.document['ddistart'], _pc.document['taql'], _pc.document['monolithic_processing'], _pc.document['reindex'] )
File "/usr/local/lib/python3.8/site-packages/casatasks/private/task_mstransform.py", line 237, in mstransform
chanbin = fh.evaluateNumpyType(chanbin)
File "/usr/local/lib/python3.8/site-packages/casatasks/private/flaghelper.py", line 2035, in evaluateNumpyType
if(isinstance(elem,np.int) or isinstance(elem,np.int8) or
File "/usr/local/lib/python3.8/site-packages/numpy/__init__.py", line 284, in __getattr__
raise AttributeError("module {!r} has no attribute "
AttributeError: module 'numpy' has no attribute 'int'
----------------------------------------------------------------------
Ran 202 tests in 1454.061s
FAILED (errors=56, skipped=25)