Build: #1 failed
Job: Test tools OSX1015 was successful
Job result summary
- Completed
- Duration
- 18 minutes
- Agent
- OSX13 Intel cbt-osx1015-tst-2.cv.nrao.edu (3)
- Total tests
- 638
Tests
- 638 tests in total
- 4 tests were quarantined / skipped
- 14 minutes taken in total.
Error summary
The build generated some errors. See the full build log for more details.
2022-10-03 20:54:13 INFO GJonesSpline::solve() Searching for and correcting phase-wraps on each baseline.
2022-10-03 20:54:13 INFO GJonesSpline::solve() Fitting phase spline.
2022-10-03 20:54:13 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline
2022-10-03 20:54:13 INFO calibrater::solve Finished solving.
2022-10-03 20:54:13 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
2022-10-03 20:54:13 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2022-10-03 20:54:13 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2022-10-03 20:54:13 INFO Clearing all model records in MS header.
2022-10-03 20:54:13 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2022-10-03 20:54:15 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2022-10-03 20:54:15 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2022-10-03 20:54:15 INFO Calibrater:: Initializing nominal selection to the whole MS.
2022-10-03 20:54:15 INFO calibrater::specifycal Beginning specifycal-----------------------
2022-10-03 20:54:15 INFO Creating G Jones table from specified parameters.
2022-10-03 20:54:15 INFO Generating 'G' corrections.
2022-10-03 20:54:15 INFO Specified parameter(s) (per spw and pol) repeated on all antennas.
2022-10-03 20:54:15 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations.
2022-10-03 20:54:15 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9])
2022-10-03 20:54:15 INFO Writing solutions to table: testcalout.cal
2022-10-03 20:54:15 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2022-10-03 20:54:15 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2022-10-03 20:54:15 INFO calibrater::open ****Using OLD VI-driven calibrater tool****
2022-10-03 20:54:15 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2022-10-03 20:54:15 INFO Clearing all model records in MS header.
2022-10-03 20:54:15 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2022-10-03 20:54:17 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2022-10-03 20:54:17 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2022-10-03 20:54:17 INFO Calibrater:: Initializing nominal selection to the whole MS.
2022-10-03 20:54:17 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
2022-10-03 20:54:17 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
2022-10-03 20:54:17 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2022-10-03 20:54:17 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)-------
2022-10-03 20:54:17 INFO Calibrater::setsolve Arranging to SOLVE:
2022-10-03 20:54:17 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2022-10-03 20:54:17 INFO Calibrater::state The following calibration terms are arranged for apply:
2022-10-03 20:54:17 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2022-10-03 20:54:17 INFO Calibrater::state The following calibration term is arranged for solve:
2022-10-03 20:54:17 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2022-10-03 20:54:17 INFO calibrater::solve Beginning solve-----------------------------
2022-10-03 20:54:17 INFO Calibrater::solve The following calibration terms are arranged for apply:
2022-10-03 20:54:17 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2022-10-03 20:54:17 INFO Calibrater::solve The following calibration term is arranged for solve:
2022-10-03 20:54:17 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2022-10-03 20:54:17 INFO Solving for Mf Mueller
2022-10-03 20:54:17 INFO For solint = inf, found 84 solution intervals.
2022-10-03 20:54:18 INFO Found good Mf Mueller solutions in 84 intervals.
2022-10-03 20:54:18 INFO Writing solutions to table: output.ms
2022-10-03 20:54:18 INFO calibrater::solve Finished solving.
2022-10-03 20:54:18 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
2022-10-03 20:54:19 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2022-10-03 20:54:19 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2022-10-03 20:54:19 INFO Clearing all model records in MS header.
2022-10-03 20:54:19 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2022-10-03 20:54:20 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2022-10-03 20:54:20 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2022-10-03 20:54:20 INFO Calibrater:: Initializing nominal selection to the whole MS.
2022-10-03 20:54:20 INFO name:: No table opened.
2022-10-03 20:54:20 INFO showcache:: The Table Cache has the following 16 entries:
2022-10-03 20:54:20 INFO showcache:: 0: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms"
2022-10-03 20:54:20 INFO showcache:: 1: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA"
2022-10-03 20:54:20 INFO showcache:: 2: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION"
2022-10-03 20:54:20 INFO showcache:: 3: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED"
2022-10-03 20:54:20 INFO showcache:: 4: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD"
2022-10-03 20:54:20 INFO showcache:: 5: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD"
2022-10-03 20:54:20 INFO showcache:: 6: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY"
2022-10-03 20:54:20 INFO showcache:: 7: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION"
2022-10-03 20:54:20 INFO showcache:: 8: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING"
2022-10-03 20:54:20 INFO showcache:: 9: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION"
2022-10-03 20:54:20 INFO showcache:: 10: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR"
2022-10-03 20:54:20 INFO showcache:: 11: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE"
2022-10-03 20:54:20 INFO showcache:: 12: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW"
2022-10-03 20:54:20 INFO showcache:: 13: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE"
2022-10-03 20:54:20 INFO showcache:: 14: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL"
2022-10-03 20:54:20 INFO showcache:: 15: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER"
2022-10-03 20:54:20 INFO name:: No table opened.
2022-10-03 20:54:20 INFO showcache:: The Table Cache is empty.
2022-10-03 20:54:20 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2022-10-03 20:54:21 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2022-10-03 20:54:21 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2022-10-03 20:54:21 INFO Clearing all model records in MS header.
2022-10-03 20:54:21 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2022-10-03 20:54:22 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2022-10-03 20:54:22 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2022-10-03 20:54:22 INFO Calibrater:: Initializing nominal selection to the whole MS.
2022-10-03 20:54:22 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
2022-10-03 20:54:22 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
2022-10-03 20:54:22 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2022-10-03 20:54:22 INFO calibrater::correct Beginning correct---------------------------
2022-10-03 20:54:22 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
2022-10-03 20:54:22 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2022-10-03 20:54:25 INFO calibrater::correct Finished correcting.
2022-10-03 20:54:25 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
Traceback (most recent call last):
File "runtest.py", line 593, in run
shutil.copy2("{}{}.py".format(workdir + "tests/",test), workdir + "{}/".format(test if not test.endswith(".py") else test[:-3]))
File "/opt/casa/03/Library/Frameworks/Python.framework/Versions/3.6/lib/python3.6/shutil.py", line 263, in copy2
copyfile(src, dst, follow_symlinks=follow_symlinks)
File "/opt/casa/03/Library/Frameworks/Python.framework/Versions/3.6/lib/python3.6/shutil.py", line 120, in copyfile
with open(src, 'rb') as fsrc:
FileNotFoundError: [Errno 2] No such file or directory: '/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/tests/test_tool_image_fromcomplist.py'
Cloning into 'casa-build-utils'...
You are using pip version 18.1, however version 21.3.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
HTTPError: 400 Bad Request from https://casa-pip.nrao.edu:443/repository/casa-dev-wheel/
Repository does not allow updating assets: casa-dev-wheel
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 70 100 70 0 0 2187 0 --:--:-- --:--:-- --:--:-- 2187
2022-10-03 20:54:13 INFO GJonesSpline::solve() Fitting phase spline.
2022-10-03 20:54:13 INFO GJonesSpline::updateCalTable Storing solutions in table gainspline
2022-10-03 20:54:13 INFO calibrater::solve Finished solving.
2022-10-03 20:54:13 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
2022-10-03 20:54:13 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2022-10-03 20:54:13 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2022-10-03 20:54:13 INFO Clearing all model records in MS header.
2022-10-03 20:54:13 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2022-10-03 20:54:15 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2022-10-03 20:54:15 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2022-10-03 20:54:15 INFO Calibrater:: Initializing nominal selection to the whole MS.
2022-10-03 20:54:15 INFO calibrater::specifycal Beginning specifycal-----------------------
2022-10-03 20:54:15 INFO Creating G Jones table from specified parameters.
2022-10-03 20:54:15 INFO Generating 'G' corrections.
2022-10-03 20:54:15 INFO Specified parameter(s) (per spw and pol) repeated on all antennas.
2022-10-03 20:54:15 INFO Specified parameter(s) (per spw and antenna) repeated on all polarizations.
2022-10-03 20:54:15 INFO spwId=1 antId=<all> polId=<all> parameter= 3 (ip0,ip1 = [0, 0, 0],[1, 0, 9])
2022-10-03 20:54:15 INFO Writing solutions to table: testcalout.cal
2022-10-03 20:54:15 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2022-10-03 20:54:15 WARN calibrater::setvi(bool,bool) Forcing use of OLD VisibilityIterator.
2022-10-03 20:54:15 INFO calibrater::open ****Using OLD VI-driven calibrater tool****
2022-10-03 20:54:15 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2022-10-03 20:54:15 INFO Clearing all model records in MS header.
2022-10-03 20:54:15 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2022-10-03 20:54:17 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2022-10-03 20:54:17 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2022-10-03 20:54:17 INFO Calibrater:: Initializing nominal selection to the whole MS.
2022-10-03 20:54:17 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
2022-10-03 20:54:17 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
2022-10-03 20:54:17 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2022-10-03 20:54:17 INFO calibrater::setsolve Beginning setsolve--(MSSelection version)-------
2022-10-03 20:54:17 INFO Calibrater::setsolve Arranging to SOLVE:
2022-10-03 20:54:17 INFO Calibrater::setsolve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2022-10-03 20:54:17 INFO Calibrater::state The following calibration terms are arranged for apply:
2022-10-03 20:54:17 INFO Calibrater::state . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2022-10-03 20:54:17 INFO Calibrater::state The following calibration term is arranged for solve:
2022-10-03 20:54:17 INFO Calibrater::state . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2022-10-03 20:54:17 INFO calibrater::solve Beginning solve-----------------------------
2022-10-03 20:54:17 INFO Calibrater::solve The following calibration terms are arranged for apply:
2022-10-03 20:54:17 INFO Calibrater::solve . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2022-10-03 20:54:17 INFO Calibrater::solve The following calibration term is arranged for solve:
2022-10-03 20:54:17 INFO Calibrater::solve . Mf Mueller: table=output.ms append=false solint=inf,none refantmode='flex' refant='none' minsnr=0 apmode=AP solnorm=false
2022-10-03 20:54:17 INFO Solving for Mf Mueller
2022-10-03 20:54:17 INFO For solint = inf, found 84 solution intervals.
2022-10-03 20:54:18 INFO Found good Mf Mueller solutions in 84 intervals.
2022-10-03 20:54:18 INFO Writing solutions to table: output.ms
2022-10-03 20:54:18 INFO calibrater::solve Finished solving.
2022-10-03 20:54:18 WARN calibrater::setvi(bool,bool) Forcing use of NEW VisibilityIterator.
2022-10-03 20:54:19 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2022-10-03 20:54:19 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2022-10-03 20:54:19 INFO Clearing all model records in MS header.
2022-10-03 20:54:19 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2022-10-03 20:54:20 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2022-10-03 20:54:20 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2022-10-03 20:54:20 INFO Calibrater:: Initializing nominal selection to the whole MS.
2022-10-03 20:54:20 INFO name:: No table opened.
2022-10-03 20:54:20 INFO showcache:: The Table Cache has the following 16 entries:
2022-10-03 20:54:20 INFO showcache:: 0: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms"
2022-10-03 20:54:20 INFO showcache:: 1: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/ANTENNA"
2022-10-03 20:54:20 INFO showcache:: 2: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/DATA_DESCRIPTION"
2022-10-03 20:54:20 INFO showcache:: 3: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FEED"
2022-10-03 20:54:20 INFO showcache:: 4: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FIELD"
2022-10-03 20:54:20 INFO showcache:: 5: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/FLAG_CMD"
2022-10-03 20:54:20 INFO showcache:: 6: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/HISTORY"
2022-10-03 20:54:20 INFO showcache:: 7: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/OBSERVATION"
2022-10-03 20:54:20 INFO showcache:: 8: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POINTING"
2022-10-03 20:54:20 INFO showcache:: 9: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/POLARIZATION"
2022-10-03 20:54:20 INFO showcache:: 10: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/PROCESSOR"
2022-10-03 20:54:20 INFO showcache:: 11: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SOURCE"
2022-10-03 20:54:20 INFO showcache:: 12: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SPECTRAL_WINDOW"
2022-10-03 20:54:20 INFO showcache:: 13: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/STATE"
2022-10-03 20:54:20 INFO showcache:: 14: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/SYSCAL"
2022-10-03 20:54:20 INFO showcache:: 15: "/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/test_tool_calibrater/gaincaltest2.ms/WEATHER"
2022-10-03 20:54:20 INFO name:: No table opened.
2022-10-03 20:54:20 INFO showcache:: The Table Cache is empty.
2022-10-03 20:54:20 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
2022-10-03 20:54:21 INFO calibrater::open ****Using NEW VI2-driven calibrater tool****
2022-10-03 20:54:21 INFO calibrater::open Opening MS: gaincaltest2.ms for calibration.
2022-10-03 20:54:21 INFO Clearing all model records in MS header.
2022-10-03 20:54:21 INFO VisSetUtil::addScrCols Adding MODEL_DATA and CORRECTED_DATA column(s).
2022-10-03 20:54:22 INFO VisSetUtil::initScrCols Initializing MODEL_DATA to (unity).
2022-10-03 20:54:22 INFO VisSetUtil::initScrCols Initialized 328860 rows.
2022-10-03 20:54:22 INFO Calibrater:: Initializing nominal selection to the whole MS.
2022-10-03 20:54:22 INFO calibrater::setapply Beginning setapply--(MSSelection version)-------
2022-10-03 20:54:22 INFO Calibrater::setapply(type, applypar) Arranging to APPLY:
2022-10-03 20:54:22 INFO Calibrater::setapply(type, applypar) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2022-10-03 20:54:22 INFO calibrater::correct Beginning correct---------------------------
2022-10-03 20:54:22 INFO Calibrater::correct2 (VI2/VB2) The following calibration terms are arranged for apply:
2022-10-03 20:54:22 INFO Calibrater::correct2 (VI2/VB2) . G Jones: table=gaincaltest2.ms.G0 select= interp=linear spwmap=[-1] calWt=false
2022-10-03 20:54:25 INFO calibrater::correct Finished correcting.
2022-10-03 20:54:25 WARN calibrater::setvi(bool,bool) Already using NEW VisibilityIterator.
Traceback (most recent call last):
File "runtest.py", line 593, in run
shutil.copy2("{}{}.py".format(workdir + "tests/",test), workdir + "{}/".format(test if not test.endswith(".py") else test[:-3]))
File "/opt/casa/03/Library/Frameworks/Python.framework/Versions/3.6/lib/python3.6/shutil.py", line 263, in copy2
copyfile(src, dst, follow_symlinks=follow_symlinks)
File "/opt/casa/03/Library/Frameworks/Python.framework/Versions/3.6/lib/python3.6/shutil.py", line 120, in copyfile
with open(src, 'rb') as fsrc:
FileNotFoundError: [Errno 2] No such file or directory: '/Users/casaci/bamboohome/xml-data/build-dir/CASA-C6DTF231-TTO15/casa6/casatestutils/nosedir/tests/test_tool_image_fromcomplist.py'
Cloning into 'casa-build-utils'...
You are using pip version 18.1, however version 21.3.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.
HTTPError: 400 Bad Request from https://casa-pip.nrao.edu:443/repository/casa-dev-wheel/
Repository does not allow updating assets: casa-dev-wheel
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 70 100 70 0 0 2187 0 --:--:-- --:--:-- --:--:-- 2187