Line data    Source code

       1             : //# RFCubeLattice.h: this defines RFCubeLattice
       2             : //# Copyright (C) 2000,2001
       3             : //# Associated Universities, Inc. Washington DC, USA.
       4             : //#
       5             : //# This library is free software; you can redistribute it and/or modify it
       6             : //# under the terms of the GNU Library General Public License as published by
       7             : //# the Free Software Foundation; either version 2 of the License, or (at your
       8             : //# option) any later version.
       9             : //#
      10             : //# This library is distributed in the hope that it will be useful, but WITHOUT
      11             : //# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
      12             : //# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Library General Public
      13             : //# License for more details.
      14             : //#
      15             : //# You should have received a copy of the GNU Library General Public License
      16             : //# along with this library; if not, write to the Free Software Foundation,
      17             : //# Inc., 675 Massachusetts Ave, Cambridge, MA 02139, USA.
      18             : //#
      19             : //# Correspondence concerning AIPS++ should be addressed as follows:
      20             : //#        Internet email: casa-feedback@nrao.edu.
      21             : //#        Postal address: AIPS++ Project Office
      22             : //#                        National Radio Astronomy Observatory
      23             : //#                        520 Edgemont Road
      24             : //#                        Charlottesville, VA 22903-2475 USA
      25             : //#
      26             : //# $Id$
      27             : #ifndef FLAGGING_RFCUBELATTICE_H
      28             : #define FLAGGING_RFCUBELATTICE_H
      29             :     
      30             : #include <casacore/casa/Arrays/Matrix.h> 
      31             : #include <casacore/lattices/Lattices/TempLattice.h> 
      32             : #include <casacore/lattices/Lattices/LatticeIterator.h> 
      33             : #include <vector>
      34             : 
      35             : namespace casa { //# NAMESPACE CASA - BEGIN
      36             : 
      37             : 
      38             : // <summary>
      39             : // RFCubeLatticeIterator: iterator over a cubic buffer
      40             : // </summary>
      41             : 
      42             : // <use visibility=local>
      43             : 
      44             : // <reviewed reviewer="" date="" tests="" demos="">
      45             : // </reviewed>
      46             : 
      47             : // <prerequisite>
      48             : //   <li> std::vector, Matrix
      49             : // </prerequisite>
      50             : //
      51             : // <synopsis>
      52             : // See RFCubeLattice, below
      53             : // </synopsis>
      54             : //
      55             : // <templating arg=T>
      56             : //    <li> same as Matrix
      57             : // </templating>
      58             : //
      59             : // <todo asof="2001/04/16">
      60             : //   <li> add this feature
      61             : //   <li> fix this bug
      62             : //   <li> start discussion of this possible extension
      63             : // </todo>
      64             : 
      65             : template<class T>
      66             : class RFCubeLattice;
      67             : 
      68             : template<class T> class RFCubeLatticeIterator
      69             : {
      70             :   private:
      71             :     std::vector<std::vector<bool> > *lattice;
      72             : 
      73             :     unsigned int iter_pos;   // current time
      74             : 
      75             :     unsigned n_chan, n_ifr, n_time, n_bit, n_corr;
      76             : 
      77             :     void update_curs();
      78             :   
      79             :   public:
      80             :     // default constructor creates empty iterator
      81             :     RFCubeLatticeIterator();
      82             :     
      83             :     // creates and attaches to lattice
      84             :     RFCubeLatticeIterator(std::vector<std::vector<bool> > *lat, 
      85             :                           unsigned nchan, unsigned nifr, 
      86             :                           unsigned ntime, unsigned nbit, unsigned ncorr);
      87             :     
      88             :     // destructor
      89             :     ~RFCubeLatticeIterator();
      90             : 
      91             :     // resets the lattice iterator to beginning
      92             :     void reset();
      93             : 
      94             :     // advances internal iterator to specified slot along the Z axis
      95             :     void advance( casacore::uInt iz );
      96             :     
      97             :     // returns position of internal iterator
      98           0 :     casacore::uInt position ()                 
      99           0 :       { return iter_pos; }
     100             :         
     101             :     // returns element at i,j of cursor
     102             :     T operator () ( casacore::uInt i,casacore::uInt j ) const;
     103             : 
     104             :     void set( casacore::uInt i, casacore::uInt j, const T &val );
     105             :     void set( casacore::uInt ichan, casacore::uInt ifr, casacore::uInt icorrs, bool val );
     106             : 
     107             :     void flush_curs();
     108             : };
     109             : 
     110             : 
     111             : // <summary>
     112             : // RFCubeLatice: a cubic lattice
     113             : // </summary>
     114             : 
     115             : // <use visibility=local>
     116             : 
     117             : // <reviewed reviewer="" date="" tests="" demos="">
     118             : // </reviewed>
     119             : 
     120             : // <prerequisite>
     121             : //   <li> TempLattice
     122             : // </prerequisite>
     123             : //
     124             : // <synopsis>
     125             : // RFCubeLattice is a [NX,NY,NZ] vector of Matrices which 
     126             : // is iterated over the Z axis. 
     127             : // While a vector of Matrices may not be localized in memory, it has the
     128             : // advantage that the total amount of memory allocated can exceed
     129             : // the available RAM, which is probably not possible if allocated as a
     130             : // single giant block.
     131             : // Each element of the matrices is a few bits, therefore (in order to
     132             : // save memory), the full matrix is represented as a bitsequence, which
     133             : // is converted to casacore::Matrix<T> on the fly.
     134             : //
     135             : // The buffer is no longer implemented using a casacore::TempLattice because the
     136             : // template parameter to casacore::TempLattice is restricted to certain types, and
     137             : // cannot be dynamic_bitset<>. Besides, casacore::TempLattice is currently(?)
     138             : // *not* well implemented: it creates casacore::TempLattice disk files although most
     139             : // of the RAM is free.
     140             : //
     141             : // If more memory than avilable RAM is requested, swapping will occur.
     142             : // The underlying OS probably knows better when to swap!
     143             : //
     144             : // </synopsis>
     145             : //
     146             : // <motivation>
     147             : // Many flagging agents make use of cubic lattices (typically, to maintain
     148             : // [NCHAN,NIFR,NTIME] cubes of something) in an identical way. This class
     149             : // provides a clean and convenient interface to the basic functions.
     150             : // </motivation>
     151             : //
     152             : // <templating arg=T>
     153             : //    <li> same as Matrix
     154             : // </templating>
     155             : //
     156             : // <todo asof="2001/04/16">
     157             : //   <li> add this feature
     158             : //   <li> fix this bug
     159             : //   <li> start discussion of this possible extension
     160             : // </todo>
     161             : 
     162             : template<class T> class RFCubeLattice
     163             : {
     164             : protected:
     165             :   casacore::IPosition                              lat_shape;
     166             :   std::vector<std::vector<bool> >        lat;
     167             :   RFCubeLatticeIterator<T>               iter;
     168             :   unsigned n_chan, n_ifr, n_time, n_bit, n_corr;
     169             : 
     170             : public:
     171             : // default constructor creates empty cube
     172             :   RFCubeLattice();
     173             : // creates NX x NY x NZ cube
     174             :   RFCubeLattice( casacore::uInt nx,casacore::uInt ny,casacore::uInt nz, casacore::uInt ncorr, casacore::uInt nAgent );
     175             : // creates NX x NY x NZ cube and fills with initial value
     176             :   RFCubeLattice( casacore::uInt nx,casacore::uInt ny,casacore::uInt nz, casacore::uInt ncorr, casacore::uInt nAgent, const T &init_val );
     177             : // destructor
     178             :   ~RFCubeLattice();
     179             : 
     180             : // creates NX x NY x NZ cube
     181             : // tile_mb is the tile size, in MB (when using paging)
     182             :   void init ( casacore::uInt nx,casacore::uInt ny,casacore::uInt nz, casacore::uInt ncorr, casacore::uInt nAgent );
     183             : // creates NX x NY x NZ cube and fills with initial value
     184             : // tile_mb is the tile size, in MB (when using paging)
     185             :   void init ( casacore::uInt nx,casacore::uInt ny,casacore::uInt nz, casacore::uInt ncorr, casacore::uInt nAgent, const T &init_val );
     186             : // destroys cube
     187             :   void cleanup ();
     188             : // returns size of cube
     189             :   static casacore::uInt estimateMemoryUse ( casacore::uInt nx,casacore::uInt ny,casacore::uInt nz )
     190             :         { return nx*ny*nz*sizeof(T)/(1024*1024) + 1; }
     191             : 
     192             : // resets the lattice iterator to beginning. 
     193             :   //casacore::Matrix<T> * reset( casacore::Bool will_read=true,
     194             :   //                   casacore::Bool will_write=true );  
     195             :   void reset();
     196             :   
     197             : // advances internal iterator to specified slot along the Z axis
     198           0 :   void advance( casacore::Int iz )   { iter.advance(iz); };
     199             :   
     200             : // returns position of internal iterator
     201           0 :   casacore::Int position ()                 { return iter.position(); }
     202             :   
     203             : // returns shape
     204           0 :   casacore::IPosition & shape ()      { return lat_shape; }
     205             :   
     206             : // returns element at i,j of cursor
     207           0 :   T operator () ( casacore::uInt i,casacore::uInt j ) const { return iter(i,j); }
     208             :   
     209             :   // sets element at i, j of cursor
     210           0 :   void set( casacore::uInt i, casacore::uInt j, const T &val ) 
     211           0 :     { iter.set(i, j, val); }
     212             : 
     213           0 :   void set( casacore::uInt ichan, casacore::uInt ifr, casacore::uInt icorr, bool val) 
     214           0 :     { iter.set(ichan, ifr, icorr, val); }
     215             : 
     216             :   // sets element for all (ichan, icorr)
     217             :   void set_column( casacore::uInt ifr, const T &val );
     218             : 
     219             : // provides access to lattice itself  
     220             : //  std::vector<std::vector<bool> > & lattice()    { return lat; }
     221             : 
     222             : // provides access to iterator  
     223           0 :   RFCubeLatticeIterator<T> & iterator()    { return iter; }
     224             : 
     225             : // creates a new iterator for this lattice
     226             :   RFCubeLatticeIterator<T>  newIter();
     227             : };
     228             : 
     229             : 
     230             : 
     231             : } //# NAMESPACE CASA - END
     232             : 
     233             : #ifndef AIPS_NO_TEMPLATE_SRC
     234             : #include <flagging/Flagging/RFCubeLattice.tcc>
     235             : #endif //# AIPS_NO_TEMPLATE_SRC
     236             : #endif