Line data Source code
1 : //# FluxStdsQS2.cc: Definition of the flux standards some of which may varies in time
2 : //# depend on time.
3 : //# Copyright (C) 2013
4 : //# Associated Universities, Inc. Washington DC, USA.
5 : //#
6 : //# This library is free software; you can redistribute it and/or modify it
7 : //# under the terms of the GNU Library General Public License as published by
8 : //# the Free Software Foundation; either version 2 of the License, or (at your
9 : //# option) any later version.
10 : //#
11 : //# This library is distributed in the hope that it will be useful, but WITHOUT
12 : //# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 : //# FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public
14 : //# License for more details.
15 : //#
16 : //# You should have received a copy of the GNU Library General Public License
17 : //# along with this library; if not, write to the Free Software Foundation,
18 : //# Inc., 675 Massachusetts Ave, Cambridge, MA 02139, USA.
19 : //#
20 : //# Correspondence concerning AIPS++ should be addressed as follows:
21 : //# Internet email: casa-feedback@nrao.edu.
22 : //# Postal address: AIPS++ Project Office
23 : //# National Radio Astronomy Observatory
24 : //# 520 Edgemont Road
25 : //# Charlottesville, VA 22903-2475 USA
26 : //#
27 :
28 : #include <components/ComponentModels/FluxStdsQS2.h>
29 : #include <components/ComponentModels/FluxStdSrcs.h>
30 : #include <casacore/casa/OS/Path.h>
31 : #include <casacore/casa/System/Aipsrc.h>
32 : #include <casatools/Config/State.h>
33 :
34 : //#include <casa/Logging/LogIO.h>
35 :
36 : using namespace casacore;
37 : namespace casa { //# NAMESPACE CASA - BEGIN
38 : namespace NSTDS { //# NAMESPACE NSTDS - BEGIN
39 : // Each of these c'tors defines the polynomial coefficients for the
40 : // log10(fluxDensity) = polynomial(log10(frequency)) calculations
41 : // and optionally additional coefficients for estimating the flux density
42 : // uncertainties.
43 : //
44 : // fill_coeffs() with two RigidVectors uses the first one for the flux density
45 : // coefficients and second one for the uncertainty coefficients, starting at
46 : // order 0. If the second RigidVector is omitted no uncertainty will be
47 : // estimated.
48 :
49 :
50 0 : Bool FluxStdBaars::setSourceCoeffs()
51 : {
52 0 : Bool found = true;
53 :
54 0 : setFreqUnit("MHz");
55 0 : FSS::Source srcEnum = FCVQS::getSrcEnum();
56 :
57 0 : if(srcEnum == FSS::THREEC286)
58 0 : fill_coeffs(RVF3(1.480, 0.292, -0.124), RVF3(0.018, 0.006, 0.001));
59 0 : else if(srcEnum == FSS::THREEC48)
60 0 : fill_coeffs(RVF3(2.345, 0.071, -0.138), RVF3(0.03, 0.001, 0.001));
61 0 : else if(srcEnum == FSS::THREEC147)
62 0 : fill_coeffs(RVF3(1.766, 0.447, -0.184), RVF3(0.017, 0.006, 0.001));
63 0 : else if(srcEnum == FSS::THREEC138)
64 0 : fill_coeffs(RVF3(2.009, -0.07176, -0.0862)); // No error specified
65 0 : else if(srcEnum == FSS::NINETEEN34M638)
66 0 : fill_coeffs(RVF4(-23.839, 19.569, -4.8168, 0.35836)); // No error specified
67 0 : else if(srcEnum == FSS::THREEC295)
68 0 : fill_coeffs(RVF3(1.485, 0.759, -0.255), RVF3(0.013, 0.009, 0.001));
69 : else
70 0 : found = false;
71 0 : return found;
72 : }
73 :
74 0 : Bool FluxStdPerley90::setSourceCoeffs()
75 : {
76 0 : Bool found = true;
77 :
78 0 : setFreqUnit("MHz");
79 0 : FSS::Source srcEnum = FCVQS::getSrcEnum();
80 :
81 0 : if(srcEnum == FSS::THREEC286)
82 0 : fill_coeffs(RVF3(1.35899, 0.3599, -0.13338));
83 0 : else if(srcEnum == FSS::THREEC48)
84 0 : fill_coeffs(RVF3(2.0868, 0.20889, -0.15498));
85 0 : else if(srcEnum == FSS::THREEC147)
86 0 : fill_coeffs(RVF3(1.92641, 0.36072, -0.17389));
87 0 : else if(srcEnum == FSS::THREEC138)
88 0 : fill_coeffs(RVF3(2.009, -0.07176, -0.0862));
89 0 : else if(srcEnum == FSS::NINETEEN34M638)
90 0 : fill_coeffs(RVF4(-30.7667, 26.4908, -7.0977, 0.605334));
91 0 : else if(srcEnum == FSS::THREEC295)
92 0 : fill_coeffs(RVF3(1.485, 0.759, -0.255));
93 : else
94 0 : found = false;
95 0 : return found;
96 : }
97 :
98 0 : Bool FluxStdPerleyTaylor95::setSourceCoeffs()
99 : {
100 0 : Bool found = true;
101 :
102 0 : setFreqUnit("MHz");
103 0 : FSS::Source srcEnum = FCVQS::getSrcEnum();
104 :
105 0 : if(srcEnum == FSS::THREEC286)
106 0 : fill_coeffs(RVF4(0.50344, 1.05026, -0.31666, 0.01602));
107 0 : else if(srcEnum == FSS::THREEC48)
108 0 : fill_coeffs(RVF4(1.16801, 1.07526, -0.42254, 0.02699));
109 0 : else if(srcEnum == FSS::THREEC147)
110 0 : fill_coeffs(RVF4(0.05702, 2.09340, -0.7076, 0.05477));
111 0 : else if(srcEnum == FSS::THREEC138)
112 0 : fill_coeffs(RVF4(1.97498, -0.23918, 0.01333, -0.01389));
113 0 : else if(srcEnum == FSS::NINETEEN34M638)
114 0 : fill_coeffs(RVF4(-30.7667, 26.4908, -7.0977, 0.605334));
115 0 : else if(srcEnum == FSS::THREEC295)
116 0 : fill_coeffs(RVF4(1.28872, 0.94172, -0.31113, 0.00569));
117 : else
118 0 : found = false;
119 0 : return found;
120 : }
121 :
122 0 : Bool FluxStdPerleyTaylor99::setSourceCoeffs()
123 : {
124 0 : Bool found = true;
125 :
126 0 : setFreqUnit("GHz");
127 0 : FSS::Source srcEnum = FCVQS::getSrcEnum();
128 :
129 : //LogIO os(LogOrigin("FluxStdPerleyTaylor99", "setSourceCoeffs", WHERE));
130 : // os << LogIO::NORMAL
131 : // << "srcEnum before fill_coeffs() = " << srcEnum
132 : // << LogIO::POST;
133 :
134 0 : if(srcEnum == FSS::THREEC286)
135 0 : fill_coeffs(RVF4(1.23734, -0.43276, -0.14223, 0.00345));
136 0 : else if(srcEnum == FSS::THREEC48)
137 0 : fill_coeffs(RVF4(1.31752, -0.74090, -0.16708, 0.01525));
138 0 : else if(srcEnum == FSS::THREEC147)
139 0 : fill_coeffs(RVF4(1.44856, -0.67252, -0.21124, 0.04077));
140 0 : else if(srcEnum == FSS::THREEC138)
141 0 : fill_coeffs(RVF4(1.00761, -0.55629, -0.11134, -0.0146));
142 0 : else if(srcEnum == FSS::NINETEEN34M638){
143 : // The broken polynomial is smooth enough to be 1st-order differentiable.
144 : //
145 : // The coefficients have been shifted to use GHz instead of MHz.
146 0 : fill_lohi_coeffs(RVF4(1.170418, 0.248618, -1.649694, 0.605334), // Low
147 0 : MFrequency(Quantity(10.0, "GHz")), // break
148 0 : RVF4(-2.5739, 10.0707, -10.0595, 2.9372)); // High
149 : }
150 0 : else if(srcEnum == FSS::THREEC295)
151 0 : fill_coeffs(RVF4(1.46744, -0.7735, -0.25912, 0.00752));
152 : else
153 0 : found = false;
154 0 : return found;
155 : }
156 :
157 0 : Bool FluxStdPerleyButler2010::setSourceCoeffs()
158 : {
159 0 : Bool found = true;
160 :
161 0 : setFreqUnit("GHz");
162 0 : FSS::Source srcEnum = FCVQS::getSrcEnum();
163 :
164 0 : if(srcEnum == FSS::THREEC286)
165 0 : fill_coeffs(RVF4(1.2361, -0.4127, -0.1864, 0.0294));
166 0 : else if(srcEnum == FSS::THREEC48)
167 0 : fill_coeffs(RVF4(1.3197, -0.7253, -0.2023, 0.0540));
168 0 : else if(srcEnum == FSS::THREEC147)
169 0 : fill_coeffs(RVF4(1.4428, -0.6300, -0.3142, 0.1032));
170 0 : else if(srcEnum == FSS::THREEC138)
171 0 : fill_coeffs(RVF4(1.0053, -0.4384, -0.1855, 0.0511));
172 0 : else if(srcEnum == FSS::NINETEEN34M638){
173 : // The broken polynomial is smooth enough to be 1st-order differentiable.
174 : //
175 : // The coefficients have been shifted to use GHz instead of MHz.
176 0 : fill_lohi_coeffs(RVF4(1.170418, 0.248618, -1.649694, 0.605334), // Low
177 0 : MFrequency(Quantity(10.0, "GHz")), // break
178 0 : RVF4(-2.5739, 10.0707, -10.0595, 2.9372)); // High
179 : }
180 0 : else if(srcEnum == FSS::THREEC295)
181 0 : fill_coeffs(RVF4(1.4605, -0.7043, -0.3951, 0.0815));
182 0 : else if(srcEnum == FSS::THREEC196)
183 0 : fill_coeffs(RVF4(1.2753, -0.7971, -0.2255, 0.0380));
184 : else
185 0 : found = false;
186 0 : return found;
187 : }
188 :
189 : // If more sources are added in future, turn this into table based one
190 0 : Bool FluxStdStevensReynolds2016::setSourceCoeffs()
191 : {
192 0 : Bool found = true;
193 :
194 0 : setFreqUnit("GHz");
195 0 : FSS::Source srcEnum = FCVQS::getSrcEnum();
196 :
197 0 : if(srcEnum == FSS::NINETEEN34M638){
198 : // New high frequency parameters as of May 1, 2016,
199 : // from Partridge et al (2016), ApJ 821,1
200 : //
201 : // The coefficients have been shifted to use GHz instead of MHz.
202 0 : fill_lohi_coeffs(RVF4(1.170418, 0.248618, -1.649694, 0.605334), // Low
203 0 : MFrequency(Quantity(11.1496, "GHz")), // break
204 0 : RVF2(1.7581, -1.3763)); // High
205 : }
206 : else
207 0 : found = false;
208 0 : return found;
209 : }
210 :
211 0 : Bool FluxStdPerleyButler2013::setSourceCoeffs()
212 : {
213 0 : Bool found = true;
214 0 : Bool timevar = true;
215 0 : setFreqUnit("GHz");
216 0 : FSS::Source srcEnum = FCVQS::getSrcEnum();
217 0 : String stddatapath;
218 0 : String stdTabName("PerleyButler2013Coeffs");
219 :
220 0 : String resolvepath = casatools::get_state( ).resolve("nrao/VLA/standards/"+stdTabName);
221 0 : if (resolvepath != "nrao/VLA/standards/"+stdTabName) {
222 0 : stddatapath = resolvepath;
223 : }
224 : else {
225 0 : stddatapath = "./"+stdTabName;
226 : }
227 0 : if (!Table::isReadable(stddatapath)) {
228 0 : ostringstream oss;
229 0 : oss << "The coefficient data for Perley-Butler 2013," << stdTabName
230 0 : << " is not found in the current directory or in datapath/measurespath.";
231 0 : throw(AipsError(String(oss)));
232 0 : }
233 : //cerr<<"use stddatapath="<<stddatapath<<endl;
234 0 : LogIO os(LogOrigin("FluxStdPerleyButler2013", "setSourceCoeffs", WHERE));
235 : os << LogIO::NORMAL2
236 : << "Use the coefficent data table: " << stddatapath
237 0 : << LogIO::POST;
238 :
239 :
240 0 : Path stdTablePath(stddatapath);
241 : //cerr<<"stddatapath="<<stddatapath<<endl;
242 0 : FCVQS::readQSCoeffsTable(stdTablePath);
243 0 : if (srcEnum != FSS::THREEC286 &&
244 0 : srcEnum != FSS::THREEC123 &&
245 0 : srcEnum != FSS::THREEC295 &&
246 0 : srcEnum != FSS::THREEC196 &&
247 0 : srcEnum != FSS::THREEC48 &&
248 0 : srcEnum != FSS::THREEC138 &&
249 : srcEnum != FSS::THREEC147)
250 0 : found=false;
251 :
252 : // check if considered as non-variable
253 0 : if (srcEnum == FSS::THREEC286 ||
254 0 : srcEnum == FSS::THREEC123 ||
255 0 : srcEnum == FSS::THREEC295 ||
256 : srcEnum == FSS::THREEC196) {
257 : // no need to do this now, will be filled with nepoch=1 in FluxCalcVQS::()
258 : //uInt row=0;
259 : //FluxCalcVQS::setSourceCoeffsfromVec(row);
260 : //RigidVector<Vector<Float>, 2> coeffs=FluxCalcVQS::getCurrentCoeffs();
261 : //fill_coeffs(RVF4(coeffs(0)), RVF4(coeffs(1)) );
262 0 : timevar=false;
263 : }
264 0 : FCVQS::isTimeVar(timevar);
265 :
266 0 : return found;
267 0 : }
268 :
269 0 : Bool FluxStdScaifeHeald2012::setSourceCoeffs()
270 : {
271 0 : Bool found = true;
272 :
273 0 : setFreqUnit( "GHz" );
274 0 : FSS::Source srcEnum = FCVQS::getSrcEnum();
275 : //FCQS::Source srcEnum = getSrcEnum();
276 :
277 0 : String stddatapath;
278 0 : String stdTabName("ScaifeHeald2012Coeffs");
279 :
280 0 : String resolvepath = casatools::get_state( ).resolve("nrao/VLA/standards/"+stdTabName);
281 0 : if (resolvepath != "nrao/VLA/standards/"+stdTabName) {
282 0 : stddatapath = resolvepath;
283 : }
284 : else {
285 0 : stddatapath = "./"+stdTabName;
286 : }
287 0 : if (!Table::isReadable(stddatapath)) {
288 0 : ostringstream oss;
289 0 : oss << "The coefficient data for Scaife-Heald 2012," << stdTabName
290 0 : << " is not found in the current directory or in datapath/measurespath.";
291 0 : throw(AipsError(String(oss)));
292 0 : }
293 : //cerr<<"use stddatapath="<<stddatapath<<endl;
294 0 : LogIO os(LogOrigin("FluxStdScaifeHeald2012", "setSourceCoeffs", WHERE));
295 : os << LogIO::NORMAL2
296 : << "Use the coefficent data table: " << stddatapath
297 0 : << LogIO::POST;
298 :
299 :
300 0 : Path stdTablePath(stddatapath);
301 : //cerr<<"stddatapath="<<stddatapath<<endl;
302 0 : FCVQS::readQSCoeffsTable(stdTablePath);
303 0 : if (srcEnum != FSS::THREEC48 &&
304 0 : srcEnum != FSS::THREEC147 &&
305 0 : srcEnum != FSS::THREEC196 &&
306 0 : srcEnum != FSS::THREEC286 &&
307 0 : srcEnum != FSS::THREEC295 &&
308 : srcEnum != FSS::THREEC380)
309 0 : found=false;
310 : /****
311 : // Needed before the coeffs. are stored in an external table
312 : //if ( srcEnum == FCQS::THREEC48 )
313 : if ( srcEnum == FSS::THREEC48 )
314 : fill_coeffs( RVF4( 64.768, -0.387, -0.420, 0.181 ),
315 : RVF4( 1.761, 0.039, 0.031, 0.060 ) );
316 : //else if ( srcEnum == FCQS::THREEC147 )
317 : else if ( srcEnum == FSS::THREEC147 )
318 : fill_coeffs( RVF4( 66.738, -0.022, -1.012, 0.549 ),
319 : RVF4( 2.490, 0.030, 0.167, 0.170 ) );
320 : //else if ( srcEnum == FCQS::THREEC196 )
321 : else if ( srcEnum == FSS::THREEC196 )
322 : fill_coeffs( RVF3( 83.084, -0.699, -0.110 ),
323 : RVF3( 1.862, 0.014, 0.024 ) );
324 : //else if ( srcEnum == FCQS::THREEC286 )
325 : else if ( srcEnum == FSS::THREEC286 )
326 : fill_coeffs( RVF4( 27.477, -0.158, 0.032, -0.180 ),
327 : RVF4( 0.746, 0.033, 0.043, 0.052 ) );
328 : //else if ( srcEnum == FCQS::THREEC295 )
329 : else if ( srcEnum == FSS::THREEC295 )
330 : fill_coeffs( RVF5( 97.763, -0.582, -0.298, 0.583, -0.363 ),
331 : RVF5( 2.787, 0.045, 0.085, 0.116, 0.137 ) );
332 : //else if ( srcEnum == FCQS::THREEC380 )
333 : else if ( srcEnum == FSS::THREEC380 )
334 : fill_coeffs( RVF2( 77.352, -0.767 ),
335 : RVF2( 1.164, 0.013 ) );
336 : else
337 : found = false;
338 : cerr<<"FluxStdSaifeHeald2012::setSourceCoeffs() ok?"<<found<<endl;
339 : ****/
340 0 : FCVQS::isTimeVar(false);
341 :
342 0 : return found;
343 0 : }
344 :
345 0 : Bool FluxStdPerleyButler2017::setSourceCoeffs()
346 : {
347 0 : Bool found = true;
348 0 : Bool timevar = false;
349 0 : setFreqUnit("GHz");
350 0 : FSS::Source srcEnum = FCVQS::getSrcEnum();
351 0 : String stddatapath;
352 0 : String stdTabName("PerleyButler2017Coeffs");
353 :
354 0 : String resolvepath = casatools::get_state( ).resolve("nrao/VLA/standards/"+stdTabName);
355 0 : if (resolvepath != "nrao/VLA/standards/"+stdTabName) {
356 0 : stddatapath = resolvepath;
357 : }
358 : else {
359 0 : stddatapath = "./"+stdTabName;
360 : }
361 0 : if (!Table::isReadable(stddatapath)) {
362 0 : ostringstream oss;
363 0 : oss << "The coefficient data for Perley-Butler 2017, " << stdTabName
364 0 : << " is not found in the current directory or in datapath/measurespath.";
365 0 : throw(AipsError(String(oss)));
366 0 : }
367 0 : LogIO os(LogOrigin("FluxStdPerleyButler2017", "setSourceCoeffs", WHERE));
368 : os << LogIO::NORMAL2
369 : << "Use the coefficent data table: " << stddatapath
370 0 : << LogIO::POST;
371 :
372 :
373 0 : Path stdTablePath(stddatapath);
374 : //cerr<<"stddatapath="<<stddatapath<<endl;
375 0 : FCVQS::readQSCoeffsTable(stdTablePath);
376 0 : if (srcEnum != FSS::THREEC286 &&
377 0 : srcEnum != FSS::THREEC123 &&
378 0 : srcEnum != FSS::THREEC295 &&
379 0 : srcEnum != FSS::THREEC196 &&
380 0 : srcEnum != FSS::THREEC48 &&
381 0 : srcEnum != FSS::THREEC138 &&
382 0 : srcEnum != FSS::THREEC147 &&
383 0 : srcEnum != FSS::J0133 &&
384 0 : srcEnum != FSS::FORNAXA &&
385 0 : srcEnum != FSS::J0444 &&
386 0 : srcEnum != FSS::PICTORA &&
387 0 : srcEnum != FSS::TAURUSA &&
388 0 : srcEnum != FSS::HYDRAA &&
389 0 : srcEnum != FSS::VIRGOA &&
390 0 : srcEnum != FSS::HERCULESA &&
391 0 : srcEnum != FSS::THREEC353 &&
392 0 : srcEnum != FSS::THREEC380 &&
393 0 : srcEnum != FSS::CYGNUSA &&
394 0 : srcEnum != FSS::THREEC444 &&
395 : srcEnum != FSS::CASSIOPEIAA)
396 0 : found=false;
397 : // all PB2017 source models are treated as non-variable
398 : // check if considered as variable
399 0 : if (srcEnum == FSS::THREEC48 ||
400 0 : srcEnum == FSS::THREEC138 ||
401 : srcEnum == FSS::THREEC147) {
402 0 : timevar=true;
403 : }
404 0 : FCVQS::isTimeVar(timevar);
405 0 : return found;
406 0 : }
407 :
408 : } //# NAMESPACE NSTD - END
409 : } //# NAMESPACE CASA - END
|
